The new generation of Haas horizontal machining

Transcription

1

2 2 PERFORMANCE-DRIVEN HORIZONTAL MACHINING CENTERS Rigid foundation 4-5 Motion control 6-7 Spindle & spindle drive 8-11 Tool changers Chip removal & coolant systems EC Series 40-taper HMCs EC Series 50-taper HMCs HS Series 50-taper HMCs The Haas control Operator convenience 36 Machine dimensions 37 The new generation of Haas horizontal machining centers started with a simple idea and a clean design slate. The engineering mission was to design and build a production-focused HMC that was robust and dependable, easy to use and affordable to buy and service. These are the trademarks of a Haas machine tool. The EC Series HMCs are completely new from the ground up, and designed to meet the needs of today s industries right out of the box. Like the industry-leading Haas VMC line and the highly successful SL Series turning center line, Haas EC Series HMCs are based on shop-proven designs that provide the best cost-to-performance ratio available. Inside this brochure you ll find all of the latest technological advancements, new machine sizes and capabilities that Haas Automation has developed through constant research and ongoing product advancement. Machine specifications 38-39

3 MODELS: EC-300 EC-400 EC-400 PP EC-500 EC-1600 EC-2000 EC-3000 HS-3 & 3R HS-4 & 4R HS-6 & 6R HS-7 & 7R

4 4 Rigid Foundation Innovative Designs and High-Accuracy Processing Yield a 50% increase in machine rigidity over previous models. Rigid, Heavy-Duty T-Base Design Haas EC Series horizontals are based on a classic and proven design. The rigid T-base foundation allows the pallet carrier to move in the Z axis, while the spindle head moves only in the X and Y axes. Specifications subject to change without notice. Not responsible for typographical errors.

5 5 1 Setup, 5 Sides Surfaced, Drilled and Tapped EC Series base castings are machined on state-of-the-art, 5-side CNC machines. Each casting is completely machined, drilled, tapped and inspected in a single setup, which provides higher accuracies and smoother production. Our ability to precisely machine all critical features of each casting eliminates alignment errors in final assembly. Highaccuracy in-process inspection guarantees that every casting meets our stringent quality standards. Cast iron provides up to 10 times the damping capacity of steel. That s why Haas uses cast iron for all major components. Our castings are internally reinforced with heavy ribs to resist flex and damp vibration. All Haas castings are thoroughly inspected before and after machining to ensure they are free of flaws. All structural components are optimized using finite element analysis (FEA) to produce the most rigid designs. Anti-Flex, Reinforced Base & Column Castings Our specially designed base and column castings feature heavy ribs that absorb vibration and transfer it away from the cutting area. The column castings yield superior rigidity and provide the most antiflex properties of any design.

6 6 Motion Control Electronic Thermal Compensation System When ballscrews rotate they generate heat, which can cause them to expand. With high duty cycles, ballscrew growth can lead to cutting errors. Our electronic thermal compensation (ETC) algorithm accurately models this heating effect and compensates for screw position. 100% Ballbar Tested Double-Anchored Ballscrews Haas uses only premium-quality ballscrews and guides from the world s top manufacturers. Although more expensive, their premium quality is the only way to achieve the high accuracy and long life that our customers demand. The ballscrews are anchored at both ends and inspected for 100% parallelism to the axis guides. Preloaded ball nuts eliminate backlash. Haas uses a state-ofthe-art ballbar test to ensure the linear accuracy and geometry of every machine. The ballbar tracks machine movement to ±0.5 micron, with a resolution of 0.1 micron. The bar is attached to the spindle and a fixed point on the table. Then the machine is put through a series of circular moves to certify synchronous movement, and verify axis straightness and squareness. Data from the ballbar generates a chart illustrating machine accuracy. Any deviations in squareness or accuracy show up as distorted circles that are very easy to spot. A copy of this chart ships with each Haas HMC as assurance that the machine is accurate and properly aligned.

7 7 Recirculating Ball Guideways Haas uses recirculating ball guideways for each axis of every HMC. These guideways are preloaded for zero clearance, and provide full load-carrying capacity in all directions. They consume less power, do not require adjustment and are proven to outperform sliding box ways for accuracy and speed. Each guideway is lubricated automatically to guarantee long life. Brushless Servomotors Box Way Required Clearance Recirculating Ball Guideway Recirculating Ball Guideways Outperform Box Ways Zero Clearance Haas uses state-of-the-art brushless servomotors that offer more torque in a smaller frame than almost any other motors available. These high-performance servos provide more power for heavy cuts, and higher acceleration/deceleration rates to reduce cycle times. Highresolution encoders and closedloop digital feedback ensure ultraprecise positioning. Recirculating ball guideways are preloaded to provide zero clearance between the moving surfaces. This increases rigidity and stiffness, while providing higher accuracy and reliability. Box ways require clearance between the moving surfaces in order to operate. Recirculating ball guides have a very low coefficient of friction, which allows faster movements without sacrificing repeatability or positioning accuracy. Box ways have a high coefficient of friction, which results in stick-slip effects that can lead to machine errors. Automatic Lubrication The Haas automatic lubrication system meters and distributes oil to guideways and ballscrews as the machine operates. This ensures that all critical components are lubricated with the correct amount of oil at all times, saving time and reducing maintenance costs. Haas Direct-Coupled Servomotors Our servomotors are coupled directly to the ballscrews with steel disc couplings to eliminate windup, even under severe loading. This greatly improves positioning accuracy, and provides more accurate threading and contouring. And they don t wear out or lose accuracy over time.

8 8 Main Spindle Features Powerful Vector Spindle Drives The Haas-designed and -built vector spindle drive uses closed-loop, digital servo technology to provide precise speed control and peak performance under heavy cutting loads. The system greatly increases low-speed torque and accelerations, resulting in the fastest, most powerful spindle ever. These drives allow you to push the spindle to 150 percent of the motor s continuous power rating for 15 minutes, and to 200 percent for 5 minutes. That s more performance headroom than other spindle drives on the market. Spindle Configurations Model EC-300 EC-400 EC-400PP EC-500 EC-1600 EC-2000 EC-3000 HS-3 HS-3R HS-4 HS-4R HS-6 HS-6R HS-7 HS-7R 40 TAPER 50 TAPER STD 2-SPEED GEARBOX 5,000 RPM STD 6,000 / OPT 10,000 RPM STD 8,000 / OPT 12,000 RPM Gearbox standard w/50-taper spindle. All machines available in CT or BT.

9 9 High-Capacity Cartridge Spindle The advanced design of our spindles provides high axialthrust capability, yet generates minimal heat. The front and rear bores of the housing and the OD of the spindle are finished in one operation. This guarantees perfect alignment between the bores and ODs, thus reducing bearing heat. On-The-Fly WYE-DELTA Switching Haas HMCs feature the Haas Dual-Drive system, which consists of a dual-winding motor Wye and Delta and an electronic switch to change between the windings. Selecting the best winding for lowrpm cutting and the best winding for high-rpm cutting yields higher torque over a much wider rpm range. On-the-fly switching maximizes acceleration/deceleration rates for more chip making and less waiting. Pre-loaded angular contact bearings are used throughout, with the two forward bearings separated by a large spacer to enhance radial stability enabling heavy cuts in steel. To ensure long life, the spindle is pressurized with air to prevent coolant contamination, and an air/oil mixture is injected automatically at preset intervals to ensure precise lubrication and long bearing life. Spindle Unit Replacement PEAK POWER RPM Typical power curve Enhanced power range with on-the-fly Wye-Delta The cartridge design of the Haas spindle simplifies service by allowing quick changeout of the entire spindle. Some items shown in this brochure are optional. Please contact your local distributor for assistance.

10 10 Main Spindle Features 40-Taper Inline Direct-Drive Spindle and Motor Unit The most advanced Haas spindle design is our innovative inline direct-drive spindle that is coupled directly to the motor. This provides super-smooth operation for excellent surface finishes, and reduces operating heat for greater thermal stability. Driving our inline spindle is a high-output motor designed and built completely in-house by Haas. This allows us to control quality and delivery, while producing a rigid, well-balanced motor that has a wide power band and smooth output. Our 8,000-rpm, 20 hp inline direct-drive spindle is standard on Haas 40 taper HMCs, and a 12,000-rpm, 30 hp spindle is optional. Rigid Tapping Using an encoder attached directly to the Haas high-performance spindle, Z-axis motion is synchronized with the spindle s rotation. Synchronized tapping eliminates the need for expensive, floating tap holders, and prevents lead-thread distortion and start-thread pullout. To reduce cycle times, the tap can reverse out of a rigid-tapped hole faster than it went in ,500 12,000 Spindle Torque Cutting performance, material removal rates and surface finish are the products of torque, speed and power. The chart at left shows a Haas 12,000-rpm 30 hp inline spindle for 40-taper HMCs. The chart at right shows a gear-driven, 10,000-rpm spindle for 50-taper models. Shift Point = 2,950 rpm Specifications subject to change without notice. Not responsible for typographical errors.

11 50-Taper Features 50-Taper Gear-Driven Haas Spindle The Haas geared-head spindle provides increased low-end torque for powerful cutting, while retaining the ability to run at high speed for smooth surface finishes. The 30 hp, 50-taper spindle is standard on larger Haas horizontals, and provides 450 ft-lb of cutting torque for heavy material removal. A 10,000-rpm option is available. High-Precision Gearbox Haas has invested more than $4 million in the finest gear-making and inspection equipment in the world. Haas gears are CNC machined and hobbed out of 8620 steel, heat treated to 60 Rc, and precision CNC ground to AGMA Class 13 quality. A dry-sump oiling system circulates oil to all vital areas of the gearbox. A B A B 50 Taper Offers More 40 Taper 50 Taper Gage diameter (A) 1.750" mm 2.750" mm Taper length (B) 2.687" mm 4.000" mm Tool clamp force* 1,800 lb 8007 N 4,000 lb N Max tool weight 12 lb 5.4 kg 30 lb 13.6 kg Max tool diameter 6" mm 10" 254 mm *Nominal 11

12 12 Tool Changing Remote Tool-Load Station To simplify tool maintenance and inspection, Haas pallet-changing HMCs with high-capacity tool changers include a remote tool-load station. This convenient side window and control panel allow the operator to access tools easily without having to load/unload them via the machine s spindle. This increases productivity by allowing the operator to perform tool maintenance while the machine is cutting. Maximum tool sizes for automatic tool changers 50 Taper A B 40 Taper A B Tool Changer Specifications Tool Changer Type # Tools Machine Tool to Tool Chip to Chip Max Dia. when Tool Max Tool Models adj. pocket full/empty Length Weight Standard configuration 40-taper side-mount 24+1 EC sec 4.5 sec 3" / 6" 10" 12 lb 40-taper side-mount 24+1 EC sec 3.7 sec 3" / 6" 12" 12 lb 40-taper side-mount 40+1 EC sec 2.8 sec 3" / 6" 12" 12 lb 40-taper side-mount 70+1 EC-400 Pallet Pool 1.6 sec 2.8 sec 3" / 6" 12" 12 lb 50-taper side-mount 30+1 EC-1600/2000/ sec 12.6 sec 4" / 10" 20" 30 lb 50-taper side-mount 38+1 HS-3/4/6/7 4.9 sec 15.8 sec 4.9" / 9.8" 20" 80 lb Optional configuration 40-taper side-mount 40+1 EC-300 & EC sec 2.8 sec 3" / 6" 12" 12 lb 40-taper side-mount 70+1 EC-400 & EC sec 2.8 sec 3" / 6" 12" 12 lb 50-taper side-mount 50+1 EC-1600/2000/ sec 12.6 sec 4" / 10" 20" 30 lb 50-taper side-mount 60+1 HS-3/4/6/7 4.9 sec 15.8 sec 4.9" / 9.8" 20" 80 lb 50-taper side-mount 90+1 HS-3/4/6/7 4.9 sec 15.8 sec 4.9" / 9.8" 20" 80 lb 50-taper side-mount HS-3/4/6/7 4.9 sec 15.8 sec 4.9" / 9.8" 20" 80 lb A B From concept to reality The Haas-designed and -built sidemount tool changer symbolizes our focus on in-house design, development and manufacturing. It s the best way to ensure total control. We use this approach to refine our processes, control costs and ensure a consistent high level of quality in everything we build.

13 13 SMTC Tool Change Times 1.6 as short as SECONDS (tool to tool) Inside the Haas Side-Mount Tool Changer The synchronized cycloidal motion of our side-mount tool changers is controlled by precision cams that are manufactured in-house on custom-built, 5-axis Haas machines. This rugged, dependable design uses a special Haas worm-gear drive and an electronically controlled start/stop system for long life and maintenance-free operation. Every Haas SMTC is manufactured completely in-house to guarantee fast, smooth, reliable operation.

14 14 Chip Removal Triple Chip Augers (Below) High-production machining generates a large volume of chips that must be removed from the machine quickly to maximize cutting time and optimize returns. EC-400 and EC-500 HMCs utilize a triple-auger chip-conveyor system to remove chips from the machine efficiently. Steeply-sloped way covers force chips into a pair of side augers that move them out of the work area. A third auger at the front of the machine transports the chips to a discharge chute compressing them and wringing out the coolant in the process. For added reliability, the system reverses automatically if a jam occurs. A quad-auger system is part of the enclosure option for the EC-1600, 2000 and Belt-Type Conveyor (Above) On EC-400 and EC-500 Haas HMCs, the main auger can be replaced with a belt-type chip conveyor that discharges chips at a standard barrel height. A belt-type conveyor is standard on the EC-300, and an in-tank conveyor is available for the EC-1600, 2000 and 3000 with enclosure option.

15 15 Coolant Systems Programmable Coolant Nozzle Our programmable coolant nozzle is controlled automatically by the part program to direct coolant precisely at the cutting area, eliminating constant adjustments by the operator. Coolant nozzle positions are specified during set up, just like tool offsets, and called up automatically for each tool as the program runs. The nozzle can also be adjusted manually from the keypad while a program is running. Flow Rate Dynamics 300-psi or 1,000-psi Through-Spindle Coolant Through-spindle coolant supplies coolant through the tool, directly to the cutting edge. This increases tool life, allows higher cutting speeds, and clears chips during deep-hole drilling and blind-pocket milling. Two systems are available. One provides up to 300 psi to the cutting edge, and the other provides up to 1,000 psi. The 1,000 psi system includes the auxiliary coolant filter (shown at right). The actual pressure of both systems will vary with the size of the coolant passages in the tool. See details at right. Easy-Access, Roll-Out Coolant Tanks The chart above illustrates the relationship between flow and pressure. For both the 300-psi and 1,000-psi through-spindle coolant options, the highest pressure occurs at the lowest flow rate. The actual pressure delivered to the cutting edge depends on the size of the coolant passages in the tool. Smaller coolant passages restrict the flow, causing the pressure to increase (up to the maximum provided by the system). Larger coolant passages in the tool allow more fluid to pass through, resulting in lower pressure at the cutting edge. Volume (GPM) psi TSC output 300 Coolant Level Sensor 1,000 psi TSC output A sensor in the coolant tank allows you to monitor coolant level directly on the control screen, preventing damaged tools and saving time. 1,000 Auxiliary Coolant Filter Our coolant tanks have wheels for easy removal and to facilitate cleaning. A separate chip basket and lift-out screen prevent chips from reaching the pump, and all electrical and hose connections at the tank can be removed by hand. This 25-micron, #2 bag-type filter system removes contamination and minute particles from the coolant before they can be recirculated through the coolant pump. Some items shown in this brochure are optional. Please contact your local distributor for assistance.

16 16 EC-300 HMC Axis travels (xyz) 20" x 18" x 14" 508 x 457 x 356 mm Pallet size 11.81" 300 mm Maximum pallet load 550 lb 250 kg Pallet change time 4.7 sec Tool taper/type CT 40 taper BT 40 optional Standard Features 20 hp Vector Dual Drive 8,000-rpm 40 Taper Spindle Inline Direct-Drive System Full 4th Axis Dual Pallet Changer (300 mm pallets) 1,000 ipm Rapids 24-Pocket Side-Mount Tool Changer Belt-Type Chip Conveyor Rigid Tapping Options (partial list) 12,000-rpm Spindle 30 hp Vector Dual Drive 40-Pocket Side-Mount Tool Changer Through-Spindle Coolant Programmable Coolant Nozzle Ø 15.00" Ø 381 mm 100 mm (3.937") 125 mm (4.921") 75 mm (2.953") 25 mm (0.984") Standard Pallet: 36 x 1/2"-13 UNC-2B Metric Pallet: 36 x M12 x " 572 mm 75 mm (2.953") 100 mm (3.937") 125 mm (4.921") 150 mm (5.906") 25 mm (0.984") 80 mm (3.150") 300 mm (11.811") Maximum fixture/workpiece size for pallet changes 150 mm (5.906") 80 mm (3.150") 300 mm (11.811")

17 17 Compact and Cost Effective 300 mm pallets not a lot of floor space Do you need a high-productivity HMC with 300 mm pallets? Look no further than the EC-300. With its compact footprint, long list of standard features, and a wide selection of options that includes a 12,000-rpm spindle and 1,000 psi through-spindle coolant, the EC-300 is an affordable way for any shop to increase productivity. Some items shown in this brochure are optional. Please contact your local distributor for assistance.

18 18 EC-400 HMC Axis travels (xyz) 20" x 20" x 20" 508 x 508 x 508 mm Pallet size 15.75" 400 mm Maximum pallet load 1,000 lb 454 kg Pallet change time 8 sec Tool taper/type CT 40 BT 40 optional Standard Features 20 hp Vector Dual Drive 8,000-rpm 40-Taper Spindle Inline Direct-Drive System 1-Degree Tombstone Indexing Dual Pallet Changer (400 mm pallets) 1,000 ipm Rapids 24-Pocket Side-Mount Tool Changer Triple Chip-Auger System Rigid Tapping Options (partial list) 12,000-rpm Spindle 30 hp Vector Dual Drive Full 4th Axis 40- or 70-Pocket Side-Mount Tool Changer Through-Spindle Coolant Programmable Coolant Nozzle Ø 19.69" Ø 500 mm M12 x 1.75 x 1.13 Dp 400 mm 5/8"-11 x 1.13 Dp (15.75") 30.00" Metric Inch 762 mm 400 mm (15.75") 50.0 mm 80 mm (3.15") Maximum fixture/workpiece size for pallet changes 50.0 mm 80 mm (3.15") Specifications subject to change without notice. Not responsible for typographical errors.

19 19 High-Productivity Solutions 400 mm Workhorse A 400 mm pallet HMC is the workhorse of many production shops, and the EC-400 packs more value into its footprint than any other 400 mm HMC on the market. With its standard triple-auger chip-conveyor system, available 70-pocket automatic tool changer and optional 1,000 psi throughspindle coolant, the EC-400 s performance cannot be matched. Some items shown in this brochure are optional. Please contact your local distributor for assistance

20 Horizontal Pallet-System Design Simple, Dependable Pallet-Indexing System The pallet-indexing system for EC Series machines employs a simple, robust and shop-proven design that has been perfected by more than 20 years of experience building rotary tables. At the heart of the system is a precision worm-gear set that is manufactured to AGMA Class 13 quality using the same high-accuracy techniques used to build Haas rotary tables. This proven design ensures precise positioning and years of trouble-free operation. Model EC-300 EC-400 EC-500 Pallet Size 11.81" 15.75" 19.69" 300 mm 400 mm 500 mm Capacity Indexer 550 lb 1,000 lb 1,000 lb 249 kg 454 kg 454 kg Capacity Full 4th 550 lb 660 lb 660 lb 249 kg 300 kg 300 kg Clamping Force* 9,000 lb 14,000 lb 14,000 lb N N N Change Time 4.7 sec 8 sec 9 sec *At 85 psi (5.6 bar) air pressure.

21 21 Heavy-Duty Pallet Clamping To hold the pallet securely to the receiver during machining, we utilize a simple but innovative design that combines mechanical and pneumatic forces to provide 7 tons of clamping force.* The pallet is accurately positioned on the receiver by six locating keys set at the widest possible point on the pallet s base. A plate then clamps the pallet directly over the locating keys using a combination of heavy-duty Belleville springs and air pressure. Since pneumatic force is used only to boost clamping force and to release the clamp, a loss of air pressure will not cause the pallet to release. Special Features Optional Hydraulic-Clamping Provision Decrease part loading/unloading times and ensure consistent part clamping by using hydraulic workholding on EC-400 and EC-500 HMCs. Our hydraulic clamping provision supplies hydraulic lines and routing for a signal cable from the back of the machine to a pair of distribution manifolds mounted to the pallet changer door. Hydraulic unit, connections to the tombstones and workholding not included. *EC-300 has 4 tons of clamping force and uses pneumatic clamping only

22 22 EC-400 Pallet Pool Why the Haas System is Different Door Open The Haas EC-400 Pallet Pool HMC is an easy-to-understand and employ productivity solution that avoids the drawbacks of complicated and expensive FMS installations. The system installs easily in your shop in less than a day, and programs just like every other Haas. Standard equipment includes a 70-pocket side-mount tool changer, 300 psi through-spindle coolant and a belt-type chip conveyor. The user-friendly Haas interface simplifies pallet scheduling and tool management, and it is very intuitive to use. 173" 4394 mm Extremely affordable, easy to use and backed by the best after-sales service in the industry you won t find a better productivity solution than the EC-400 Pallet Pool. Simple Pallet Scheduling The six pallets in the pallet pool are scheduled via the versatile pallet-scheduler screen. The operator can assign programs to each pallet, schedule jobs and set priorities. Pallets are moved to and from the load station and storage rack by highlighting the pallet number on the screen and pressing a single key. We ve made the pallet pool simple to use and easy to program just what you d expect from Haas.

23 23 Lights-Out Operation 217" 5512 mm

24 24 EC-500 HMC Axis travels (xyz) 32" x 20" x 28" 813 x 508 x 711 mm Pallet size 19.68" 500 mm Maximum pallet load 1,000 lb 454 kg Pallet change time 9.0 sec Tool taper/type CT 40 BT 40 optional Standard Features 20 hp Vector Dual Drive 8,000-rpm 40-Taper Spindle Inline Direct-Drive System 1-Degree Indexing Dual Pallet Changer (500 mm pallets) 1,000 ipm Rapids 40-Pocket Side-Mount Tool Changer Triple Chip Auger System Rigid Tapping Options (partial list) 12,000-rpm Spindle 30 hp Vector Dual Drive Full 4th Axis 70-Pocket Side-Mount Tool Changer Through-Spindle Coolant Programmable Coolant Nozzle Ø 29.50" Ø 750 mm 30.00" 762 mm Maximum fixture/workpiece size for pallet changes

25 25 High-Productivity Solutions Bigger Parts, Bigger Pallets The EC-500 features a 32" x 20" x 28" work envelope, a dual pallet changer with 500 mm pallets and a built-in, high-precision pallet indexer. The machine comes standard with an 8,000-rpm, 40-taper spindle, a 40-pocket side-mount tool changer, 1,000 ipm rapids and a high-volume coolant system. Also standard is a highprecision, face-gear pallet indexer that provides 1-degree indexing. The machine s enclosure allows a maximum part swing of 29.5" on the indexer. M12 x 1.75 x 1.13" Dp 500 mm (19.69") Metric 50 mm 500 mm (19.69") 400 mm (15.75") 5/8"-11 x 1.13" Dp Inch 100 mm (3.94") 50 mm 100 mm (3.94")

26 EC-1600 HMC Large Axis travels (xyz) 64" x 40" x 32" 1626 x 1016 x 813 mm Table size 64" x 32" 1626 x 813 mm Maximum table load 10,000 lb 4536 kg Big, Powerful, Economical The EC-1600 base model is configured as an open-frame HMC with unimpeded access to the table which handles workpieces weighing up to 10,000 lb. For added versatility, the EC-1600 may be configured with an optional 5-degree face-gear indexer or full 4th-axis rotary platter built into the table. All 50-taper EC models also are available with an optional full enclosure that includes a high-volume coolant system and triple chip augers. Even with the full enclosure, you ll still have plenty of access through a 61" (1549 mm) operator door opening. Basic configuration Available Sizes EC " x 40" x 32" 1626 x 1016 x 813 mm EC-1600ZT 64" x 40" x 40" 1626 x 1016 x 1016 mm EC-1600YZT 64" x 50" x 40" 1626 x 1270 x 1016 mm EC " x 40" x 32" 2134 x 1016 x 813 mm EC " x 40" x 32" 3048 x 1016 x 813 mm Hydraulic Clamping for 4th-Axis Platter To hold the 4th-axis platter in position under heavy cutting loads, the EC-1600 utilizes an ingenious hydraulic-brake design. Hydraulic fluid is pumped at 1,000 psi into a sealed cavity between two disks. The fluid forces the outer disc against the inner wall of the gear. Assembled with minimum clearance to the gear wall, a push out of only a few thousandths of an inch yields 4,000 ft-lb of brake torque. And with no moving parts, the system provides long-term, trouble-free operation. Also used on HS Series HMCs with built-in 4th axis. Note: All machines listed on this page must be anchored to reinforced concrete foundations for proper operation. Please see installation manual or contact Haas for exact requirements. 26 Optional Full 4th Axis* Platter Diameter 30" 762 mm Drive System Servo Rotational Torque 2,000 ft-lb 2712 Nm Brake Torque 4,000 ft-lb 5423 Nm Indexing Accuracy ± 30 arc sec Max. Capacity 10,000 lb 4536 kg *EC-1600, ZT, YZT & 2000 only

27 Capacity and Affordable Ø 77.00" (front doors open) Ø 1956 mm Ø 49.50" (front doors closed) Ø 1257 mm With optional enclosure Maximum fixture/workpiece size for EC-1600 with 4th axis; visit for specs on other models.

28 28 HS Series HMCs HS-3 Axis travels (xyz) 150" x 50" x 60" 3810 x 1270 x 1524 mm HS-4 Axis travels (xyz) 150" x 66" x 60" 3810 x 1676 x 1524 mm HS-6 Axis travels (xyz) 84" x 50" x 60" 2134 x 1270 x 1524 mm HS-7 Axis travels (xyz) 84" x 66" x 60" 2134 x 1676 x 1524 mm Specifications subject to change without notice. Not responsible for typographical errors.

29 29 Handle Large Workpieces Expand the Possibilities Ø 100" Ø 2450 mm Big parts require big machines. Haas HS Series 50-taper horizontals use a modular configuration that allows you to choose a machine with the travels and footprint you need, rather than paying for a machine that s too big. Each of these extra-largetravel HMCs features a fully supported X axis to handle extremely heavy loads, and a 50-taper spindle that provides 450 ft-lb of cutting torque for serious metal removal. A 38-tool side-mount tool changer comes standard, with options for 60, 90 and 120 tools. For additional flexibility, each model is available with a full 4thaxis platter set into the table. A 10,000 lb capacity and 50" swing radius mean you can easily machine all four sides of very large parts in a single setup. Maximum workpiece size for full 4th axis without coolant shield Full 4th Axis HS-3R, 4R, 6R and 7R models include an integrated full 4th-axis rotary table. See page 39 for specifications, and page 26 for a description of the platter braking system. 152" (3861 mm) Max Depth 189" (4801 mm) 366" Max (9296 mm) Note: All machines listed on this page must be anchored to reinforced concrete foundations for proper operation. Please see installation manual or contact Haas for exact requirements.

30 30 The Haas Control LED Beacon Light The Haas-designed beacon light features ultra-bright LEDs that can easily be seen from anywhere in the shop. The LEDs generate very little heat and have a life expectancy of more than 10 years. 15" Color LCD Screen Our full-color, 15" TFT LCD display is designed to work in the machine shop environment. The high-intensity, high-contrast LCD features a very wide viewing angle, and will not fade out in bright light. The panel is mounted behind anti-glare, tempered glass for protection and easy viewing. USB Port USB port allows the use of customer-supplied external drives or flash memory devices. Multi-Function Jog Handle Most machines use the jog handle only to move the axes around. On Haas machines, the jog handle can also be used in other modes to cursor through the program for faster editing, override spindle speeds and feedrates, or scan through offsets, parameters, etc. Advanced Program Editing A unique feature of the Haas control is an advanced program editor that allows the operator to edit programs in a dual-window format. One-Button Features Common multi-step functions, such as powering up the machine or setting tool offsets, have been reduced to the push of a single button. Other often used functions, such as setting part zeros, homing the machine and selecting the next tool during set up, are also one-button commands. Dedicated Closed System Our focus is to provide Haas users with a robust, dependable control that is seamlessly integrated with the machine. Our closed system is not reliant on PC-based controls or third-party NC suppliers. When you call Haas, you get a company that takes full responsibility for the entire machine. Dedicated Keypad The Haas keypad has more than 130 keys. All common functions, including a full alphanumeric keypad, are clearly labeled for operator ease. If you ve ever fumbled with hot keys, or had to page through screens looking for a specific function, then you will appreciate the simplicity of the Haas control. There are no encrypted codes to memorize, and many functions can be performed simply with the push of a single button. Stainless Steel Bezel Constructed of heavy-gauge T304 stainless steel with a fine-grained finish, the bezel of the Haas control not only looks great, it s also easy to clean, resists wear and will not corrode. Specifications subject to change without notice. Not responsible for typographical errors.

31 31 Control Features User friendly Advanced program editor Brushless AC servo drives Up to 833-ipm cutting feedrates Triple 32-bit processors Executes up to 1,000 blocks/second ISO standard G-code compatibility Haas one-button power-up Haas one-button tool offset entry 200 tool offsets 105 work coordinates Tool load monitoring Tool life management Helical interpolation Background editing Split-screen program review Trig calculator Tangent calculators Speeds and feeds calculator Arc calculator RS-232 / DNC link / USB / optional Ethernet Mid-program restart Inch or metric programming Message page Selectable languages Self-diagnostics Fully descriptive alarms Programmable mirror imaging Advanced pocket milling Bolt-hole drilling Graphic dry run 5 spare M functions Contour accuracy control Text engraving Made in the USA Control Specifications General Microprocessor Program execution speed Axis control Triple high-speed 32-bit 1,000 blocks/sec standard 3 axes linear, 4th and 5th axes optional Interpolation G01, G02, G03, helical Min. input increment inch mode metric mode " mm Min. output resolution " ( mm) Feed Functions Rapid Traverse Override 5%, 25%, 50%, 100% Feedrate Override 0% to 999% in 1% increments Jog Handle Resolution inch mode metric mode "/0.001"/0.01"/0.1" per handle division 0.001/0.01/0.1/1.0 mm per handle division Jog Feeds inch mode metric mode 0.1/1.0/10.0/100.0 ipm 1.0/10/100/1000 mm/min. Zero Return One key (G28) Spindle Functions Speed Command S = 1 to max spindle rpm Override 0% to 999% in 1% increments Tool Functions Length Compensation 200 sets, geometry & wear Diameter/Radius Compensation 200 sets, geometry & wear Length Measurement Automatic length storage Life Management 200 sets w/alarms Selection Txx command Programming Compatibility ISO standard G code Positioning Absolute (G90), incremental (G91) Canned Cycles 22 functions standard Circular Pocket Milling G12, G13 Bolt-Hole Drilling G70, G71, G72 Advanced Pocket Milling G150 Inch/Metric Switchable Work Coordinates 105 sets Part Zero Set Automatic storage M Code Outputs 5 spare 2D Cutter Diameter Compensation G40, G41, G42 2D Cutter Length Compensation G43, G44, G49 3D+ Cutter Diameter Compensation G141 5-Axis Tool Length Compensation G143 Data Input/Output Communications Port RS-232, USB Data Rate To 115,200 baud Memory Capacity Standard 1 MB; up to 16 MB optional Number of Programs 500 May be used by options. With 6' or shorter cable. Some items shown in this brochure are optional. Please contact your local distributor for assistance.

32 32 Visual Quick Code Common-sense, text-driven, VQC programming Visual Quick Code uses a graphical interface to make creating simple G-code programs nearly effortless. Machinists simply select the operation they wish to perform from an on-screen list (e.g., bolt-hole circle, drilling, tapping, pocket milling). Once the operation is selected, a series of graphical part templates is displayed, along with a text description of the operation to be performed for each template. Select the template that best matches what you want to do, and Visual Quick Code prompts you to fill in part dimensions, speeds, feeds, etc. Using the information you input, Visual Quick Code generates the correct G-code program to match the operation. Complex parts can be programmed a piece at a time by using individual templates to generate G code for each part feature, and then inserting the G code into a single (or an existing) program. Because Visual Quick Code is a program stored in the Haas control s memory, rather than embedded, machinists can modify existing templates, or even create their own templates for common operations or families of parts. Intuitive Programming System Simple, intuitive and more powerful than ever Thanks to Haas Intuitive Programming System, it s no longer necessary for a machine operator to know G code to perform basic milling operations. The IPS software comes standard on our Toolroom Mills, and is optional on all other Haas vertical machining centers. The Haas Intuitive Programming System is a proprietary conversational operating system that uses an easy-to-understand tabbed format with full-color graphics to guide the operator through the steps necessary to machine a part. First, the control leads the operator through basic job setup: setting tool and work offsets, selecting the tool type and specifying the material being cut. The operator then selects an operation to perform and fills in basic information as prompted. Default values are automatically filled in for spindle speed, depth of cut and feedrate based on the information provided, but the operator can change these conservative values if desired. Once all necessary information is entered, pushing Cycle Start performs the desired operation. Multiple operations can be recorded and saved as a single G-code program that can be played back to duplicate the part. This program can be transferred to any other Haas VMC and run without editing. Help menus are available directly on screen, and a graphic dry-run feature allows operators to check their work before running a part. Novice operators quickly learn both basic programming and the finer points of using the Haas control by working with the Intuitive Programming System. Hard Drive with Ethernet Interface Store and transfer data between your Haas and a network or PC with the Ethernet connection. Program files are easily transferred to and from memory or the internal hard drive, and large files can be accessed by multiple machines. High-speed data transfers allow DNC of large files at up to 1,000 blocks per second. Compatible with Windows 95, 98, ME, 2000 and XP. Also works with server versions NT 4.0, 2000 and IPX/SPX or TCP/IP protocol. Easily set up from the control screen. Memory Lock Keyswitch Locks memory to prevent program editing by unauthorized personnel. It can also be used to lock settings, parameters, offsets and macro variables. 8 M Functions Adds 8 additional M functions for a total of up to 13 user interfaces. Use these to activate probes, auxiliary pumps, clamping devices, part loaders, etc.

33 33 High-Speed Machining The High-Speed Machining option is a powerful tool to reduce cycle times and improve accuracy. Testing on complex 3- to 5-axis applications has shown drastic reductions in cycle times, as well as increased accuracy and smoother motion. Using a motion algorithm called acceleration before interpolation, combined with up to 80 blocks of lookahead, the HSM option allows contouring feedrates up to 833 ipm without risk of distortion to the programmed path. Programmed motions are accelerated before interpolation to ensure that the movement of each axis does not exceed the acceleration capability of the machine. The look-ahead algorithm determines the fastest feedrate at which each stroke can be blended into the next without stopping. This results in higher accuracy, smoother motion and a higher actual feedrate even with complex part geometry. Many of today s high-speed controls are either very expensive or require a pre-processing mode or special post, which is time consuming and alters the G-code program. The Haas HSM option accepts ISO standard G code from all major CAM systems, and is nly a fraction of the cost of other high-speed controls. USB Port The USB port allows the use of customer-supplied external drives or flash memory devices. Second Home Position Engraving By using a single block of code, you can easily engrave any text string enclosed in parentheses. Sequential part numbers can be engraved by using the standard serializing function. User-Definable Macros Create subroutines for custom canned cycles, probing routines, operator prompting, math equations or functions, and family-of-parts machining with variables. Memory Upgrades up to 16 MB Allows loading of large programs directly into the machine, rather than from DNC, for faster feedrates. Battery-powered, high-speed static RAM is faster than dynamic RAM and retains data even when the power is turned off. 4th- and 5th-Axis Control Allows the use of 4th- and 5th-axis rotary tables for multi-side machining or machining complex contours and shapes, such as impellers. Increases productivity and reduces the number of setups required. Coordinate Rotation/Scaling Use rotation in conjunction with work offset probing to speed workpiece set up, or use it to rotate a pattern to another location or around a circumference, etc. Use scaling to reduce or enlarge a toolpath or pattern Allows the operator to quickly send the axes to a user-defined Home position other than the machine s Home position. Color Remote Jog Handle The patented Haas color remote jog handle expands the capabilities of our standard remote jog handle by adding a 2.8" color graphic display, an 11-button keypad, a triple-knob motion-control system and a built-in LED inspection light. You can set tool and work offsets, jog up to 9 axes, display machine position, show the current program running and much more all from the jog handle. Some items shown in this brochure are optional. Please contact your local distributor for assistance.

34 34 The Hidden Power Inside the HELP/CALC The Help function is a built-in, searchable operator s manual that explains the various functions of a Haas machine. Simply type in a keyword to quickly find a specific topic, or hit F1 for G-code help and F2 for M-code help. The Calculator pages are another powerful tool. There are calculators for solving triangle equations, circle-circle-tangent equations and circle-linetangent equations, as well as a speeds-and-feeds calculator. Also included are a standard math calculator, a drill-and-tap chart, a decimal-equivalent chart and a time-and-date function. These calculators simplify machining operations and speed math calculations, and the solution to any equation can easily be pasted into a program directly from the calculators. The Power of a Single Button Some of the most powerful features of the Haas control features that every machinist will truly appreciate take only the push of a single button. For example, you can set tool offsets with the push of a single button without having to enter numbers manually into the control. Simply jog a tool to the surface of the part, push the Tool Offset Measure button, and the tool s length is automatically stored in the tool length register. Now, push the Next Tool button and repeat the process for each tool. That s it! Setting work offsets is just as easy. These time-consuming processes have been reduced to a few simple steps, and that s just two of the special features inside every Haas control. Ask your distributor for a complete demonstration, and see for yourself how a Haas will change the way you work. Tool Load Monitoring Maximizing tool life is another key to increasing productivity. The Haas control can monitor the spindle load for each tool and automatically adjust the feeds for that tool if the load exceeds a limit set by the operator. If a tool exceeds the preset limit, the control can be set to reduce the commanded feedrate, alert the operator, go into feed-hold mode or generate a tool-overload alarm. The first time a program is run, the Haas control automatically records the highest load seen for each tool. Using this information and the Tool Load Monitoring feature of the control, the operator can set load limits for each tool. This maximizes tool life, and protects the workpiece and machine from the effects of tool wear. Specifications subject to change without notice. Not responsible for typographical errors.

35 35 Haas Control Advanced Tool Management To maximize productivity, the Haas control has an integrated Advanced Tool Manager that allows you to create a group of redundant tools for use within a program. From a single screen, you can view the different tool groups and their parameters. Simply define which tool numbers are part of a group, and what parameter will determine when to change to a redundant tool. This can be based on feed time, the number of tool calls, the number of holes drilled or tapped, or a preset load limit. To use a group of redundant tools in a program, simply enter the group number as your tool call-out. The tool offsets you defined during set up will automatically be loaded for each tool as it s called up. SETNG /GRAPH Push this button to access the Settings pages of the Haas control, where you ll find a wide selection of operator-definable preferences. Use these settings to optimize the way you work. You can set program restarts and automatic power-off, select languages and units of measure, lock out overrides and parameters, access special features like electronic thermal compensation and much more. The Graphics page provides a 2D representation of the programmed toolpath. Use this graphic dry run to identify possible problems and avoid mishaps. CURNT/COMDS The Current Commands page displays the current running status of the machine, including the current program running, the current position, which tool is in the spindle, the spindle and axis loads, the current spindle speed and the feedrate. Additional screens show which commands and G code are being used in the current program; and a timer shows cycle time, cutting time, power-on time and M30 count (number of parts). Other displays show which macro variables are being used, provide tool-life information, and show the minimum and maximum spindle load for each tool. Some items shown in this brochure are optional. Please contact your local distributor for assistance.

36 36 Haas Wireless Intuitive Probing System The Haas Wireless Intuitive Probing System (WIPS), with optical transmission for part setting, tool setting and inspection, consists of the following elements: Spindle Probe Module (work probe) Tool Setter Module (tool probe) Intuitive Probing System Sofware The Haas Wireless Intuitive Probing System makes probing easy to understand and use through simple language, a graphical interface and clear instructions. Step-by-step graphical instructions show machine operators how to set up the probing cycles. The Haas Intuitive Probing System software guides the operator through the probing set-up process, prompting them to enter each necessary dimension. Once all dimensions are entered, the operator executes the probing cycle by pushing the Cycle Start button. The probing cycle can then be saved in memory, and recalled when needed. With the Haas Intuitive Probing System, no knowledge of G-code programming is needed to use the probing system. WIPS is available as a factory-installed option on most new Haas HMCs. Operator Convenience Features Enclosed Tool Presetter The WIPS tool probe is attached to a rigid, fixed arm for accuracy, and located outside the work envelope, so it does not interfere with machining. A sheetmetal cover protects the probe, and prevents chips from sticking to the probe tip. Tool Rack System This versatile rack provides convenient storage for toolholders, cutting tools and accessories right at the machine, eliminating the need for a separate tool cart. The system comes with one rack, a shelf and a storage box; extra racks are available.

37 37 Machine Dimensions A A EC MODEL LINE B C EC MODEL LINE B C EC-300 EC-400 EC-500 EC-1600 EC-2000 EC-3000 HS-3 HS-4 HS-6 HS-7 A 122.8" 3119 mm 134.0" 3404 mm 145.8" 3703 mm 172.8" mm 194.5" mm 265.8" mm 366.0" 9296 mm 366.0" 9296 mm 253.0" 6426 mm 253.0" 6426 mm B 133.5" 3391 mm 143.8" 3653 mm 165.0" 4191 mm 142.6" mm 142.6" mm 142.6" mm 189.0" 4801 mm 189.0" 4801 mm 189.0" 4801 mm 189.0" 4801 mm C 93.9" 2385 mm 103.4" 2626 mm 101.4" 2576 mm 119.0" mm 119.0" mm 119.0" mm 152.0" 3861 mm 168.0" 4267 mm 152.0" 3861 mm 169.0" 4293 mm D 20.3" 516 mm 22.2" 564 mm 21.1" 536 mm *51.5" 1308 mm 51.5" 1308 mm 51.5" 1308 mm 55.5" 1410 mm 71.5" 1816 mm 55.5" 1410 mm 71.5" 1816 mm E 2.35" 60 mm 2.1" 53 mm 1.1" 28 mm *11.5" 292 mm 11.5" 292 mm 11.5" 292 mm 5.5" 140 mm 5.5" 140 mm 5.5" 140 mm 5.5" 140 mm F 1.55" 39 mm 4.0" 102 mm 3.94" 100 mm 8.0" 203 mm 8.0" 203 mm 8.0" 203 mm 5.8" 147 mm 5.8" 147 mm 5.8" 147 mm 5.8" 147 mm G 14.0" 356 mm 20.0" 508 mm 28.0" 711 mm 32.0" 813 mm 32.0" 813 mm 32.0" 813 mm 60.0" 1524 mm 60.0" 1524 mm 60.0" 1524 mm 60.0" 1524 mm H 18.0" 457 mm 20.0" 508 mm 20.0" 508 mm 40.0" 1016 mm 40.0" 1016 mm 40.0" 1016 mm 50.0" 1270 mm mm 50.0" 1270 mm 66.0" 1676 mm J 10.0" 254 mm 14.5" mm 20.8" mm 32.0" 813 mm 42.0" 1067 mm 60.0" 1524 mm 75.0" 1905 mm 75.0" 1905 mm 42.0" 1067 mm 42.0" 1067 mm K 10.0" 254 mm 10.0" 254 mm 16.0" 406 mm 32.0" 813 mm 42.0" 1067 mm 60.0" 1524 mm 75.0" 1905 mm 75.0" 1905 mm 42.0" 1067 mm 42.0" 1067 mm 1) Includes additional travel to reach tool probe. 2) With optional enclosure. D CL G CL K J H HS 3 / 4/ 6/ 7 Max. Depth B C E F CL Gage Line D 45.5" 1156 mm E 5.5" 140 mm *These measurements reflect only the EC-1600 with optional built-in 4th axis. A Specifications subject to change without notice. Not responsible for misprints or typographical errors. Note: Overall shipping dimensions vary; contact Haas for details.

38 Machine Specifications (Find more specifications, dimensions and detailed information online at 40-Taper Models 50-Taper Models EC-300 EC PP EC-500 X 20" 20" 32" 508 mm 508 mm 813 mm X Travels Y 18" 20" 20" 457 mm 508 mm 508 mm Travels Y Z 14" 20" 28" 356 mm 508 mm 711 mm Z Pallets Indexer (standard) Optional 4th Axis Size 11.81" 300 mm 15.75" 400 mm 19.69" 500 mm Pallet Change Time 4.7 sec 8.0 sec 9.0 sec Capacity: Indexer 1,000 lb 454 kg 1,000 lb 454 kg Indexing Accuracy ± 3 arc-sec ± 3 arc-sec 90 Rotation Time 3.6 sec 3.6 sec Capacity: Full 4th Axis 550 lb 250 kg 660 lb 300 kg 660 lb 300 kg Rotational Torque 210 ft-lb 285 Nm 300 ft-lb 407 Nm 300 ft-lb 407 Nm Brake Torque 200 ft-lb 271 Nm 500 ft-lb 678 Nm 500 ft-lb 678 Nm Table Optional 4th Axis Width Length T-Slot Width Max Weight on Table Platter Diameter Rotational Torque Brake Torque Max Weight on Platter Indexing Accuracy ± 15 arc-sec ± 15 arc-sec ± 15 arc-sec Taper 90 Rotation Time 5.6 sec 5.5 sec 5.5 sec Speed Taper CT 40 or BT 40 CT 40 or BT 40 CT 40 or BT 40 Spindle (standard) Drive System Spindle (standard) Speed 8,000 max rpm 8,000 max rpm 8,000 max rpm Drive System Inline Direct Drive Inline Direct Drive Inline Direct Drive Max Torque 75 1, , , Spindle Motor Max Rating 1 20 hp 14.9 kw 20 hp 14.9 kw 20 hp 14.9 kw Max Torque Standard Spindle Motor Max Rating 1 Speed Drive System Spindle (optional) Speed 12,000 max rpm 12,000 max rpm 12,000 max rpm Drive System Inline Direct Drive Inline Direct Drive Inline Direct Drive Max Torque 75 2, , , Spindle Motor Max Rating 1 30 hp 22.4 kw 30 hp 22.4 kw 30 hp 22.4 kw Spindle (optional) Max Torque Standard Spindle Motor Max Rating 1 Axis Motors Max Thrust Axis Motors Max Thrust 2,400 lb 4,600 lb 4,600 lb N N N Axis Motors Rapids Axis Motors Rapids 1,000 ipm 1,000 ipm 1,000 ipm 25.4 m/min 25.4 m/min 25.4 m/min Max Cutting Max Cutting 500 ipm 500 ipm 500 ipm 12.7 m/min 12.7 m/min 12.7 m/min Capacity Standard Optional Tool Changer Accuracy Miscellaneous Capacity Standard Optional , Tool Type / Taper CT 40 std BT 40 opt CT 40 std BT 40 opt CT 40 std BT 40 opt Max Tool Diameter full adjacent empty 3" 6" 76 mm 152 mm 3" 6" 76 mm 152 mm 3" 6" 76 mm 152 mm Tool to Tool 2.8 sec 2.1 sec sec. Chip to Chip 4.5 sec 3.7 sec sec. Positioning ±0.0002" ± mm ±0.0002" ± mm ±0.0002" ± mm Repeatability ±0.0001" ± mm ±0.0001" ± mm ±0.0001" ± mm Machine Weight 15,500 lb 7031 kg 20,000 lb 27,000 lb kg kg 28,000 lb kg Coolant Capacity 55 gallon (208 liter) 80 gallon (303 liter) 95 gallon (360 liter) Air Required psi bar psi bar psi bar Power Required (min) VAC VAC VAC VAC VAC VAC Tool Changer Accuracy Miscellaneous Tool Type / Taper Max Tool Diameter full adjacent empty Tool to Tool Chip to Chip Positioning Repeatability Machine Weight Coolant Capacity Air Required Power Required (min) 1) 5-minute rating. 2) The EC-400PP comes standard with 70+1 tools. Change times are 1.6 sec (T-T) and 2.8 sec (C-C). 3) With optional built-in 4th axis, subtract 4" (100 mm). 4) Linear scales required to achieve stated accuracy. Please go to for more product details and information. 38

39 Select HMCs and then Model Guide for specific information right at your finger tips.) EC-1600 EC-2000 EC-3000 HS-3 HS-4 HS-6 HS-7 64" mm 84" mm 120" mm 150" mm 150" mm 84" 2134 mm 84" 2134 mm 40" mm 40" mm 40" 1016 mm 50" mm 66" 1676 mm 50" mm 66" 1676 mm 32" 813 mm 32" 813 mm 32" 813 mm 60" 1524 mm 60" 1524 mm 60" 1524 mm 60" 1524 mm 36" mm 36" 914 mm 28" 711 mm 40" 1016 mm 40" 1016 mm 40" 1016 mm 40" 1016 mm 64" 1626 mm 84" 2134 mm 120" 3048 mm 146" 3708 mm 146" 3708 mm 80" 2032 mm 80" 2032 mm 5/8" 16 mm 5/8" 16 mm 5/8" 16 mm 0.87" 22 mm 0.87" 22 mm 0.87" 22 mm 0.87" 22 mm 10,000 lb 4536 kg 10,000 lb 4536 kg 10,000 lb 4536 kg 10,000 lb 4536 kg 10,000 lb 4536 kg 10,000 lb 4536 kg 10,000 lb 4536 kg 30" 762 mm 30" 762 mm (HS-3R) 37" 940 mm (HS-4R) 37" 940 mm (HS-6R) 37" 940 mm (HS-7R) 37" 940 mm 2000 ft-lb 2712 Nm 2000 ft-lb 2712 Nm 2000 ft-lb 2712 Nm 2000 ft-lb 2712 Nm 2000 ft-lb 2712 Nm 2000 ft-lb 2712 Nm 4,000 ft-lb 5423 Nm 4,000 ft-lb 5423 Nm 4,000 ft-lb 5423 Nm 4,000 ft-lb 5423 Nm 4,000 ft-lb 5423 Nm 4,000 ft-lb 5423 Nm 10,000 lb 4536 kg 10,000 lb 4536 kg 10,000 lb 4536 kg 10,000 lb 4536 kg 10,000 lb 4536 kg 10,000 lb 4536 kg #50 Taper #50 Taper #50 Taper #50 Taper #50 Taper #50 Taper #50 Taper 6,000 max rpm 6,000 max rpm 6,000 max rpm 5,000 max rpm 5,000 max rpm 5,000 max rpm 5,000 max rpm 2-Speed Geared Head 2-Speed Geared Head 2-Speed Geared Head 2-Speed Geared Head 2-Speed Geared Head 2-Speed Geared Head 2-Speed Geared Head rpm rpm rpm rpm rpm rpm rpm hp 22.4 kw 30 hp 22.4 kw 30 hp 22.4 kw 30 hp 22.4 kw 30 hp 22.4 kw 30 hp 22.4 kw 30 hp 22.4 kw 10,000 max rpm 10,000 max rpm 10,000 max rpm 2-Speed Geared Head 2-Speed Geared Head 2-Speed Geared Head rpm rpm rpm rpm rpm rpm 30 hp 22.4 kw 30 hp 22.4 kw 30 hp 22.4 kw x = 5,600 lb N x = 3,400 lb N x = 3,400 lb N x = 5,040 lb N x = 5,040 lb N x = 5,040 lb N x = 5,040 lb N y = 5,600 lb N y = 5,600 lb N y = 5,600 lb N y = 5,600 lb N y = 5,600 lb N y = 5,600 lb N y = 5,600 lb N z = 7,500 lb N z = 7,500 lb N z = 7,500 lb N z = 7,500 lb N z = 7,500 lb N z = 7,500 lb N z = 7,500 lb N x = 540 ipm 13.7 m/min x = 540 ipm 13.7 m/min x = 360 ipm 9.1 m/min x = 500 ipm 12.7 m/min x = 500 ipm 12.7 m/min x = 500 ipm 12.7 m/min x = 500 ipm 12.7 m/min y = 540 ipm 13.7 m/min y = 540 ipm 13.7 m/min y = 540 ipm 13.7 m/min y = 500 ipm 12.7 m/min y = 500 ipm 12.7 m/min y = 500 ipm 12.7 m/min y = 500 ipm 12.7 m/min z = 540 ipm 13.7 m/min z = 540 ipm 13.7 m/min z = 540 ipm 13.7 m/min z = 710 ipm 18.0 m/min z = 710 ipm 18.0 m/min z = 710 ipm 18.0 m/min z = 710 ipm 18.0 m/min 500 ipm 500 ipm 360 ipm 500 ipm 500 ipm 500 ipm 500 ipm 12.7 m/min 12.7 m/min 9.1 m/min 12.7 m/min 12.7 m/min 12.7 m/min 12.7 m/min , 90, , 90, , 90, , 90, 120 CT 50 std BT 50 opt CT 50 std BT 50 opt CT 50 std BT 50 opt CT 50 std BT 50 opt CT 50 std BT 50 opt CT 50 std BT 50 opt CT 50 std BT 50 opt 4" 10" 4" 10" 4" 10" 4.9" 9.8" 4.9" 9.8" 4.9" 9.8" 4.9" 9.8" 102 mm 254 mm 102 mm 254 mm 102 mm 254 mm 125 mm 250 mm 125 mm 250 mm 125 mm 250 mm 125 mm 250 mm 10.3 sec 10.3 sec 10.3 sec 4.9 sec 4.9 sec 4.9 sec 4.9 sec 12.6 sec 12.6 sec 12.6 sec 15.8 sec 15.8 sec 15.8 sec 15.8 sec ±0.0003" 4 ±0.008 mm ±0.0003" 4 ±0.008 mm ±0.0003" 4 ±0.008 mm ±0.0002" per 24" mm per 610 mm ±0.0002" per 24" ±0.005 mm per 610 mm ±0.0002" per 24" mm per 610 mm ±0.0002" per 24" mm per 610 mm ±0.0002" 4 ±0.005 mm ±0.0002" 4 ±0.005 mm ±0.0002" 4 ±0.005 mm ±0.0002" 2 ±0.005 mm ±0.0001" ±0.003 mm ±0.0001" ±0.003 mm ±0.0001" ±0.003 mm 30,000 lb kg 31,500 lb kg 37,500 lb kg 62,000 lb kg 63,000 lb kg 57,000 lb kg 58,000 lb kg 95 gallon (360 liter) 95 gallon (360 liter) 95 gallon (360 liter) 95 gallon (360 liter) 95 gallon (360 liter) 95 gallon (360 liter) 95 gallon (360 liter) psi bar psi bar psi bar psi bar psi barr psi bar psi bar VAC VAC VAC VAC VAC VAC VAC VAC VAC VAC VAC VAC VAC VAC NOTE: FLA/kVA requirements determined by motor horsepower. Check with your Haas distributor for various requirements. Differing VAC/kVA options available. Specifications subject to change without notice. Not responsible for misprints or typographical errors. 39

40 Worldwide Support U.S. headquarters & manufacturing facility European headquarters & showroom with machine inventory and spare parts distribution center (Brussels) Asian headquarters & showroom with machine inventory and spare parts distribution center (Shanghai) More than $50,000,000 in spare parts are stocked at 160 locations worldwide. Head Office, California, USA European Headquarters, Brussels, Belgium Asian Headquarters, Shanghai, China Our network of dedicated Haas Factory Outlets provides local attention to detail, fully stocked service vans, and the training and backing of an international organization. In total, more than $50,000,000 in spare parts are stocked at 160 locations worldwide. Local parts inventories are supported by overnight availability from main headquarters. Haas Automation, Inc Sturgis Road, Oxnard, California Toll Free: Fax: Haas Automation, Europe Mercuriusstraat 28, B-1930 Zaventem, Belgium Tel: Fax: Haas Automation, Asia No. 96 Yi Wei Road, Building 67, Waigaoqiao FTZ, Shanghai P.R.C. Tel: Fax: