ST, XT & SU SELF PRIMING PUMPS
|
|
- Imogene Berry
- 6 years ago
- Views:
Transcription
1 ST, XT & SU SELF PRIMING PUMPS VOLUME ONE ISSUED JANUARY, 214
2 ST, XT & SU SELF PRIMING PUMPS Heavy duty, self priming trash pumps. Reliable dirty water and solids handling pumping performance for water treatment, raw water, processing, irigation, agriculture, mining, oil and gas. VERSATILE HEAVY DUTY SOLUTION Southern Cross ST, XT and SU series pumps are self priming, heavy duty trash pumps designed to handle a wide range of pumped product and applications. ST, XT and SU model pumps feature a tough and compact design and are capable of self priming up to 7.6 metres. ST and XT models are available in sizes from 2 inch (mm) to 12 inches (3mm) discharge and are capable of flow rates from 1 to 3m3/hour ( USGPM) and heads up to 62 metres (23ft). SU models are available in sizes from 3 inch (7mm) to 6 inch (1mm) discharge and feature high efficiency, high head performance capable of flow rates from 8 to 12m 3 /hour (3- USGPM) and heads of up to 44 metres (144ft). Southern Cross ST, XT and SU self priming pumps are capable of passing waste and solids up to 7mm in diameter making them excellent in dirty water and waste water applications. The rugged design can withstand the rigours of continuous heavy duty use with simple servicing and easy maintenance.. BACK PULL OUT DESIGN ST, XT and SU pumps feature a back pull-out design which allows removal of the rotating element for servicing without removing suction and discharge pipework. This feature reduces downtime during routine and unscheduled maintenance. QUICK AND SIMPLE MAINTENANCE ST, XT and SU self priming pumps feature a maintenance hatch which allows quick access to the pump casing and impeller so that blockages can be removed and maintenance can be carried out without any requirement for special tools or disconnecting pipework or drives. The access hatch combined with the back pullout design allows easy access to replace impellers and mechanical seals and greatly reduces downtime for routine maintenance, the removal of pump blockages and replacement of damaged or worn components. WIDE RANGE OF CONSTRUCTION MATERIALS A wide range of materials of construction are available to suit any application. Standard construction pumps are cast iron casing and wet end with 414 high tensile steel shaft and 316 stainless steel mechanical seal. Other materials available include A216 cast steel, CD4MCu Duplex, 34 stainless steel, 316 stainless steel, austempered ductile iron and C276 Hastelloy. SOUTHERN CROSS ST4 SELF PRIMING PUMP. SOUTHERN CROSS SU4 HIGH HEAD SELF PRIMING PUMP. Special materials not available in all models - please consult Pentair Southern Cross 2 ST, XT & SU SELF PRIMING PUMPS
3 OPEN IMPELLER The two vane open impeller in ST and XT pumps allows the passage of solids up to 7mm (3 ) in diameter and the SU models feature 6 vane high efficiency open impellers that can pass solids up to 32mm (1.2 ). SHIMLESS EXTERNAL IMPELLER ADJUSTMENT The pumps feature an externally adjustable impeller which only requires an allen key or fixed wrench. This system allows for adjustments to be made to the impeller clearances without having to open the pump casing. This allows users to easily optimise performance and efficiency while extending the service life of both the impeller and wear plate. MECHANICAL SEALS 316 stainless steel mechanical seals with titanium/tungten-carbide faces are fitted as standard to all ST, XT and SU self priming pumps. Buna O-rings are fitted as standard to cast iron and cast steel pumps and Viton O-rings are fitted as standard to all other pump construction varients. Other O-ring materials available to suit specialised applications including high temperature, acidic or alkaline applications. PROTECTIVE COATINGS AND PAINT Southern Cross can provide an extensive range of internal protective coatings and external paint options to suit any application or installation environment. The rugged design of the ST, XT and SU series self priming pumps provides reliable and efficient performance in a range of heavy duty applications including transferring dirty and waste water with solids up to 7mm in diameter. ST, XT & SU SELF PRIMING PUMPS 3
4 PUMP PERFORMANCE SELECTION CHARTS Flow Rate (USGPM) Total Head (m) SU3 SU4 SU Total Head (ft) ST2 XT3 XT4 XT Volumetric Flow Rate (L/s) Volumetric Flow Rate (m /h) Flow Rate (USGPM) Total Head (m) XT8 XT1 ST Total Head (ft) Volumetric Flow Rate (L/s) Volumetric Flow Rate (m /h) 4 ST, XT & SU SELF PRIMING PUMPS
5 ST2 PUMP DATA Net Weight: 92kg Impeller Diameter: 19mm Maximum Solids Diameter: 44.mm Standard flange drilling to ANSI B 16.:1989. Other drilling options available on request. SELF PRIMING FLOW RATE (USGPM) TOTAL HEAD (M) % 29RPM % 3% OPERATING RANGE 3% 4% 42% 4% 48% 47% 7.kW.kW 3.6kW TOTAL HEAD (FEET) kW 1.kW 1.1kW 2.2kW 2 NPSH (M) RPM NPSH (FEET) ST, XT & SU SELF PRIMING PUMPS
6 XT3 PUMP DATA Net Weight: 183kg Impeller Diameter: 222mm Maximum Solids Diameter: 63.mm Standard flange drilling to ANSI B 16.:1989. Other drilling options available on request. SELF PRIMING FLOW RATE (USGPM) RPM % 4% OPERATING RANGE 4% 12 TOTAL HEAD (M) % 48% 1kW 11kW TOTAL HEAD (FEET) kW 4% 3.7kW.kW 4 2 NPSH (M) 1.7kW 1.1kW 1.kW 2.2kW RPM NPSH (FEET) 6 ST, XT & SU SELF PRIMING PUMPS
7 XT4 PUMP DATA Net Weight: 26kg Impeller Diameter: 248mm Maximum Solids Diameter: 76.2mm Standard flange drilling to ANSI B 16.:1989. Other drilling options available on request. SELF PRIMING FLOW RATE (USGPM) RPM % OPERATING RANGE 12 TOTAL HEAD (M) % 2% 2% 18.kW TOTAL HEAD (FEET) kW kW 7.kW 11kW kW NPSH (M) 1.kW.7kW 1.kW 1.1kW 2.2kW RPM NPSH (FEET) ST, XT & SU SELF PRIMING PUMPS 7
8 XT6 PUMP DATA Net Weight: 364kg Impeller Diameter: 314mm Maximum Solids Diameter: 76.2mm Standard flange drilling to ANSI B 16.:1989. Other drilling options available on request. SELF PRIMING FLOW RATE (USGPM) RPM 12 TOTAL HEAD (M) % % % OPERATING RANGE 8% 8% % % TOTAL HEAD (FEET) 1 9 3kW kW 11kW 22kW 18.kW 4 2 NPSH (M) 1 2.2kW 3.7kW RPM NPSH (FEET).kW 7.kW 8 ST, XT & SU SELF PRIMING PUMPS
9 XT8 PUMP DATA Net Weight: 81kg Impeller Diameter: 37mm Maximum Solids Diameter: 76.2mm Standard flange drilling to ANSI B 16.:1989. Other drilling options available on request. SELF PRIMING FLOW RATE (USGPM) TOTAL HEAD (M) RPM % 4% % 6% OPERATING RANGE 63% 63% 6% TOTAL HEAD (FEET) % 3kW % 37kW 4kW kw 4 67% 11kW 1kW 18.kW 22kW 2.kW 7.kW NPSH (M) RPM NPSH (FEET) ST, XT & SU SELF PRIMING PUMPS 9
10 XT1 PUMP DATA Net Weight: 63kg Impeller Diameter: 37mm Maximum Solids Diameter: 76.2mm Standard flange drilling to ANSI B 16.:1989. Other drilling options available on request. SELF PRIMING FLOW RATE (USGPM) RPM 14 OPERATING RANGE % 6% 7% 7% 12 TOTAL HEAD (M) % 79% 7% 7% 7kW TOTAL HEAD (FEET) kW kw kW 37kW 22kW 18.kW 2.kW 1kW 7.kW 11kW NPSH (M) RPM NPSH (FEET) 1 ST, XT & SU SELF PRIMING PUMPS
11 ST12 PUMP DATA Net Weight: 998kg Impeller Diameter: 47mm Maximum Solids Diameter: 76.2mm Standard flange drilling to ANSI B 16.:1989. Other drilling options available on request. SELF PRIMING FLOW RATE (USGPM) % 12 RPM % 6% % 3 11 OPERATING RANGE 79% 12 TOTAL HEAD (M) kW 3kW 2 22kW 18.kW 1kW % 4kW kw 7% 7kW 9kW TOTAL HEAD (FEET) NPSH (M) RPM NPSH (FEET) ST, XT & SU SELF PRIMING PUMPS 11
12 ST & XT DIMENSIONS ST2, XT3, XT4 & XT6 Dimensions (mm) Model A B C D E F G H I J K L M N O P Q ST XT XT XT XT8 Dimensions (mm) Model A B C D E F G H I J K L M N O P Q XT ST, XT & SU SELF PRIMING PUMPS
13 XT1 Dimensions (mm) Model A B C D E F G H I J K L M N O P Q XT ST12 Dimensions (mm) Model A B C D E F G H I J K L M N O P Q ST ST, XT & SU SELF PRIMING PUMPS 13
14 SU3 PUMP DATA Net Weight: 214kg Impeller Diameter: 279mm Maximum Solids Diameter: 2.6mm Standard flange drilling to ANSI B 16.:1989. Other drilling options available on request. SELF PRIMING FLOW RATE (USGPM) % 6 21 RPM 6 19 OPERATING RANGE % % 6% 6% % TOTAL HEAD (M) kW 1kW TOTAL HEAD (FEET) 2 % kW 6 NPSH (M) RPM 1kW 1.kW kW 3.6kW.kW 7.kW NPSH (FEET) 14 ST, XT & SU SELF PRIMING PUMPS
15 SU4 PUMP DATA Net Weight: 272kg Impeller Diameter: 279mm Maximum Solids Diameter: 28.6mm Standard flange drilling to ANSI B 16.:1989. Other drilling options available on request. SELF PRIMING FLOW RATE (USGPM) RPM 4% % 6% OPERATING RANGE 66% 2 7% 7% TOTAL HEAD (M) % 3kW 22kW TOTAL HEAD (FEET) 2 18.kW 8 NPSH (M) RPM kW 3.6kW 6%.kW % 1kW 11kW 7.kW NPSH (FEET) ST, XT & SU SELF PRIMING PUMPS 1
16 SU6 PUMP DATA Net Weight: 413kg Impeller Diameter: 317.mm Maximum Solids Diameter: 31.7mm Standard flange drilling to ANSI B 16.:1989. Other drilling options available on request. SELF PRIMING Priming (m) FLOW RATE (USGPM) % 6% 6 19 RPM 66% OPERATING RANGE 7% 72% TOTAL HEAD (M) % 73% 72% 7% kw 6% TOTAL HEAD (FEET) kW 3kW 8 6 NPSH (M) RPM 4kW kW 18.kW 1kW.kW 7.kW 11kW NPSH (FEET) 16 ST, XT & SU SELF PRIMING PUMPS
17 SU DIMENSIONS SU3, SU4 & SU6 Dimensions (mm) Model A B C D E F G H I J K L M N O P Q SU SU SU SOUTHERN CROSS ST6 SELF PRIMING PUMP WITH WEG MINING SPEC ELECTRIC MOTOR. ST, XT & SU SELF PRIMING PUMPS 17
18 ST, XT & SU MATERIALS OF CONSTRUCTION Material Specification No. Part Description Cast Iron Cast Iron/A216 Cast Steel Cast Iron/ CD4MCu Cast Iron/34 Stainless Steel Cast Iron/ Austenitic Ductile Iron 1 Casing A 48CL3 2 Impeller A A216 CD4 MCu 34SS ADI 3 Wear Plate SAE 12 A216 CD4 MCu 34SS ADI 4 Cover Plate A 48CL3 A216 CD4 MCu 34SS ADI Bearing Housing A 48CL3 6 Seal Plate A 48CL3 A216 CD4 MCu 34SS ADI 7 Flap Valve Neoprene 8 Shaft Sleeve ANSI 414HT ANSI Flange A 48CL3 1 Mechanical Seal Casing in 316 Stainless Steel, O rings in Buna & Viton, Faces in Titanium and Tungsten Carbide 11 Shaft ANSI 414HT ANSI 17-4 O rings Buna Viton Special materials not available in all models - please consult Pentair Southern Cross 18 ST, XT & SU SELF PRIMING PUMPS
19 Material Specification No. Part Description CD4MCu 316 Stainless Steel 34 Stainless Steel Austenitic Ductile Iron C276 Hastelloy 1 Casing CD4 MCu 316SS 34SS ADI C276 2 Impeller CD4 MCu 316SS 34SS ADI C276 3 Wear Plate CD4 MCu 316SS 34SS ADI C276 4 Cover Plate CD4 MCu 316SS 34SS ADI C276 Bearing Housing CD4 MCu 316SS 34SS ADI C276 6 Seal Plate CD4 MCu 316SS 34SS ADI C276 7 Flap Valve 8 Shaft Sleeve 9 Flange CD4 MCu ADI C276 1 Mechanical Seal Casing in 316 Stainless Steel, O rings in Buna & Viton, Faces in Titanium and Tungsten Carbide 11 Shaft O rings Viton ANSI SS 34SS ANSI 17-4 Viton ST, XT & SU SELF PRIMING PUMPS 19
20 PENTAIR SOUTHERN CROSS 8618 Warrego Highway, Withcott, QLD 432, Australia. All Pentair trademarks and logos are owned by Pentair, Ltd. All other brand or product names are trademarks or registered marks of their respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal opportunity employer. A.B.N Pentair, Ltd. All Rights Reserved. 214 Pentair Southern Cross
SOUTHERN CROSS SXSS ELECTRO-SUBMERSIBLE SLURRY PUMP
SOUTHERN CROSS SXSS ELECTRO-SUBMERSIBLE SLURRY PUMP VOLUME ONE ISSUED MARCH 15, 2013 SXSS ELECTRO-SUBMERSIBLE SLURRY PUMPS Durable, electro-submersible slurry pumps. Versatile and rugged solution for the
More informationSXHS SLURRY PUMPS VOLUME ONE ISSUED FEBRUARY 20, 2013
SXHS SLURRY PUMPS VOLUME ONE ISSUED FEBRUARY 2, 213 SXHS HORIZONTAL SLURRY PUMPS Heavy duty, horizontal slurry pumps. High efficiency transfer of abraisive and high density slurries with extended wear
More informationEFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date:
Contents Section Page Model Designation 2 Features 3 Standard Specifications 5 Specifications 6 Selection Chart 7 Suction Speed Flow Chart 9 Performance Curves 10 Dimension Drawings 20 Model Designation
More informationHYDRO-TITAN. Heavy duty back pullout water & process liquid pumps
HYDRO-TITAN Heavy duty back pullout water & process liquid pumps Positioned for Reliability The total cost of a pump includes not only purchase price, but cost of operation: power costs, reliability, ease
More informationabcdef EJseries Self-Priming Centrifugal Pumps where innovation flows SNG
abcdef SNG 9 where innovation flows Self-Priming Centrifugal Pumps EJseries www.euroflopumps.com Coding System EJseries Series EJS = Shaft Sewage Bare Pumps EJT = Large Flow Trash Pumps EJU = High Head
More informationTKL. Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump. Experience In Motion
TKL Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump Experience In Motion 1 The total cost of a pump includes not only purchase price, but cost of operation: power costs, reliability, ease
More informationISO 2858 Back Pullout End Suction Centrifugal Pumps
ISO 2858 Back Pullout End Suction Centrifugal Pumps Back Pullout End Suction Centrifugal Pumps Applications: Irrigation Water transfer Building Services Pressure Boosting Mining HVAC Features: Designed
More informationAURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS
AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES Model 3550 ASME/ANSI B73.1 Industrial Process Pumps Capacities to GPM
More informationSELF-PRIMING, SOLIDS-HANDLING TRASH PUMPS
SELF-PRIMING, SOLIDS-HANDLING TRASH PUMPS GRpumps.com S U P E R T S P E C I F I C A T I O N S SIZES MATERIALS OF CONSTRUCTION MAX. CAPACITY MAX. HEAD MAX. SOLIDS 3", 4", 6", 8", 10" (75 mm, 100 mm, 150
More informationAURORA Series MODEL 3560 ASME/ANSI B73.1M INDUSTRIAL PROCESS PUMPS
AURORA 3500 Series MODEL 3560 ASME/ANSI B73.M INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM AURORA 3500 Series Model 3560 ASME/ANSI B73.M Industrial Process Pumps Capacities to 7000 GPM (590 m 3 /hr) Heads
More informationPatent Pending. High Performance Self-Priming. Centrifugal Trash Pumps.
High Performance Self-Priming Centrifugal Trash Pumps www.gormanrupp.com A History of Innovation Gorman-Rupp has been revolutionizing the pumping industry since. Many of the innovations introduced by Gorman-Rupp
More informationMAH HORIZONTAL SLURRY PUMPS
MA H SLURRY PUMPS MAH HORIZONTAL SLURRY PUMPS Heavy duty, horizontal slurry pumps. High efficiency transfer of abraisive and high density slurries with extended wear life and reliable service intervals.
More informationTrash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service
Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service WIDE RANGE OF APPLICATIONS: Liquids Entrained with Solids General Industrial, Pulp & Paper,
More information2018 TRASH FLOW TRASH PUMP BROCHURE SELF PRIMING CENTRIFUGAL PUMPS WET PRIME PUMPS
2018 TRASH FLOW TRASH PUMP BROCHURE SELF PRIMING CENTRIFUGAL PUMPS WET PRIME PUMPS Wastecorp Trash Flow - Range Overview OVERVIEW PRODUCT TECHNICAL SPECIFICATIONS PAGE 2 connection Transfer up to 210 GPM
More informationModel 3550 ASME/ANSI B73.1M Industrial Process Pumps
3500 Series Model 3550 ASME/ANSI B73.1M Industrial Process Pumps The Aurora Model 3550 was designed to perform in the toughest industrial applications whether in the chemical, petro-chemical, mining, pulp
More informationCASING COVER PLATE LUBRICATION GASKETS PRESSURE RELIFE VALVE SEAL OPTIONAL EQUIPMENT
Series: PFSPT Self-Priming Centifugal Pumps Size: x, Solids -1/ DISCHARGE x, lbs. Flange LIQUID TEMPERATURE 1 F CASING IMPELLER SHAFT SHAFT SLEEVE WEAR RING COVER PLATE FLAP VALVE Gray Iron ASTM A- Class
More informationFLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8
FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:
More informationVersatile, Reliable Pumps for a Wide Range of Applications D35 Series
Versatile, Reliable Pumps for a Wide Range of Applications D35 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More information855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to
More informationSIL Inline Single Stage Centrifugal Pumps
SIL Inline Single Stage Centrifugal Pumps SIL Inline Pump Range True Reliability Sulzer s new inline pump range (SIL) has been designed to fulfill efficiency regulations across all industries and also
More informationtechnosubtp series centrifugal auto prime trash pumps
technosubtp series centrifugal auto prime trash pumps 4tSTap standard trash auto prime FEATURES Technosub Standard Trash Auto Prime pumps are specifically designed to effectively handle a wide range of
More informationGoulds Process Pumps designed for severe corrosive services
Process Pumps designed for severe corrosive services Non-metallic vertical sump and process pumps designed for severe corrosive services Capacities to 5000 GPM (11 m3/hr) Heads to 275 feet (85m) Design
More informationITT. Goulds Pumps. Marlow Series Trash Hog II. Engineered for life. Wastewater. Self-Priming Solids Handling Centrifugal Pumps
Goulds Pumps Marlow Series Trash Hog II Self-Priming Solids Handling Centrifugal Pumps Goulds Pumps is a brand of ITT Corporation. www.goulds.com Engineered for life TRASH HOG II A FULL RANGE OF PRODUCT
More informationVersatile, Reliable Pumps for a Wide Range of Applications H25 Series
Versatile, Reliable Pumps for a Wide Range of Applications H25 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More informationDry installed end-suction pumps, LSN-series. according to ISO 2858 / ISO 5199
Dry installed end-suction pumps, LSN-series according to ISO 2858 / ISO 5199 Technical characteristics Performance 50 Hz 60 Hz Capacity up to 600 m 3 /h 2900 USgpm Head up to 170 m 800 feet Speed up to
More informationGeneral Catalog. A New Vision for Quality Pumps. General Catalog
General Catalog A New Vision for Quality Pumps General Catalog 2 Tru20 is committed to only the highest quality pumping products. We produce a tremendous range of water and process pumps in order to serve
More informationFeatures: Applications: Irrigation. Commercial. Construction. Municipal. Mining
Frame Mount 7.5" BOOK: FMT-015 DATE: Mar. 1, 2012 Features: Volute: Ductile iron for heavy-duty service. Back pullout design. Can be rotated for ease of installation. Impeller: Enclosed design for high
More informationVersatile, Reliable Pumps for a Wide Range of Applications D10 Series
Versatile, Reliable Pumps for a Wide Range of Applications D10 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More informationMYERS MODELS 4R AND 4RX
MYERS MODELS 4R AND 4RX SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4R) AND HAZARDOUS LOCATION (4RX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4R AND 4RX Solids Handling Wastewater Pumps The Right Choice
More informationZPP and Z22 Double Suction Axially Split Single Stage Centrifugal Pumps
ZPP and Z22 Double Suction Axially Split Single Stage Centrifugal Pumps Main Applications Features and Benefits ZPP and Z22 double suction axially split single stage centrifugal pumps are used for demanding
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs
H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25
More informationPeerless Pump FULL PRODUCT LINE. Brochure B Sterling Fluid Systems (USA), Inc.
Peerless Pump FULL PRODUCT LINE Sterling Fluid Systems (USA), Inc. Brochure B-1270 Vertical Industrial and Process Axial and Mixed Flow for Large Volume Pumping Encased (Can ) Water and Process Liquid
More informationVolute Casing Pumps LSN. according to iso 2828 / iso Jansen Pompentechniek T: +31(0) E:
Volute Casing Pumps LSN according to iso 2828 / iso 5199 Technical Data Performance Range: m Capacity up to 500m 3 /h (1980USgpm) m Head up to 150m (492feet) m Speed 2950/3550rpm Pump Sizes: m DN 25 up
More informationAxial and Mixed Flow Pumps for Large Volume Pumping
Vertical Industrial and Process Vertical close coupled single or multi-stage turbine pumps. Axial and Mixed Flow for Large Volume Pumping Vertical pumps for handling water in large volumes. Mixed flow
More informationEJseries. Self-Priming Centrifugal Pumps
EJseries Self-Priming Centrifugal Pumps T w w w. e u r o f l o p u m ps. c o m EJseries - Coding System Eg. EJS -11 XX XX XX EJT - XXX XX-XXX XX XXXX XXXX Series EJS = Shaft (bare) pumps EJT = Large Flow
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with
More informationbarmesapumps.com WHAT IS AN ANSI PUMP
WHAT IS AN ANSI PUMP In 1977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition of the materials and safety specifications,
More informationD/G-35 Series. Up to 37gpm (140 l/min) D/g-35 hydra-cell diaphragm pump. D/G-35 Specialized Designs
D/g-35 hydra-cell diaphragm pump D/G-35 Series Up to 37gpm (14 l/min) D/G-35 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
More informationTrash Hog II Self Priming Solids Handling Centrifugal Pumps
Trash Hog II Self Priming Solids Handling Centrifugal Pumps Marlow Pumps ITT Industries Trash Hog II A Full Range of Product Features Industrial Duty Power End Provides rigid shaft support. Ample oil
More informationGoulds 3181 High-temperature/Pressure Paper Stock/ Process Pumps
High-temperature/Pressure Paper Stock/ Process Pumps Designed to Handle High Temperature and High Pressure Services of the Pulp & Paper Industries Capacities to 13,000 GPM (3000 m 3 /h) Heads to 410 feet
More informationPROCESS PUMPS MODEL V200 ANSI B73.2
EAGLE PROCESS PUMPS V200 ANSI B73.2 POWER END Shaft Diameters Bearings Stuffing Box PUMP END Maximum Diameter Solids Minimum Casing Thickness Casing Corrosion Allowance Working Pressure Test Pressure
More informationASME END SUCTION PUMPS Catalogue K-90
ASME END SUCTION PUMPS Catalogue K-90 ASME B3.1-01 ISO 9001:008 REGISTERED COMPANY Engineered Pumps for Industrial and Municipal Services ASME B3.1 / ANSI END SUCTION PUMPS This catalogue provides the
More informationModel 133 Models 134 & 135 AURORA 130 SERIES SINGLE STAGE TURBINE TYPE PUMPS
Model Models 4 & AURORA 0 SERIES SINGLE STAGE TURBINE TYPE PUMPS WWW.AURORAPUMP.COM AURORA 0 SERIES Single Stage Turbine Type Pumps Capacities to 0 G.P.M. Heads to 700 Ft. Temperatures to F A Pioneer in
More informationMYERS MODELS 4RC AND 4RCX
3450 RPM 1150 and 1750 RPM MYERS MODELS 4RC AND 4RCX SOLIDS HANDLING WASTEWATER PUMPS (4RCX only) STANDARD (4RC) AND HAZARDOUS LOCATION (4RCX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4RC AND 4RCX Solids
More informationMHH HORIZONTAL SLURRY PUMPS
MHH SLURRY PUMPS MHH HORIZONTAL SLURRY PUMPS Heavy duty, horizontal slurry pumps. High efficiency transfer of abraisive and high density slurries with extended wear life and reliable service intervals.
More informationRS Multi-Stage, Ring Section Pumps
RS Multi-Stage, Ring Section Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The RS Series is Carver s multi-stage pump for fluids at moderate to high pressures. The
More informationHigh Performance Pumps, Quality Service, Quality People...Pioneer Pump!
1 High Performance Pumps, Quality Service, Quality People...Pioneer Pump! W hen pumps are required to Perform, Pioneer Pumps stand up to the challenge. Pioneer Pump is a leading edge manufacturing company
More informationMYERS 4VCDP. 4" Solids Handling
MYERS 4VCDP Standard Submersible Dry Pit 4" Solids Handling Wastewater Pumps WWW.FEMYERS.COM TECHNICAL INFORMATION 2 SMOOTH OPERATION The 4VCDP submersible dry pit wastewater pumps are a heavy-duty 4"
More informationMYERS MODELS 4VC & 4VCX
MYERS MODELS 4VC & 4VCX 4" SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4VC) AND HAZARDOUS LOCATION (4VCX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4VC & 4VCX Solids Handling Wastewater Pumps Cut Your Pumping
More informationVolute Casing Pumps LSN. according to iso 2828 / ISO 5199
Volute Casing Pumps LSN according to iso 2828 / ISO 5199 Technical Data Performance Range: m Capacity up to 500m 3 /h (1980USgpm) m Head up to 150m (492feet) m Speed 2950/3550rpm Pump Sizes: m DN 25 up
More informationMYERS MODELS 6VC & 6VCX
MYERS MODELS 6VC & 6VCX 6" SOLIDS HANDLING WASTEWATER PUMPS STANDARD (6VC) AND HAZARDOUS LOCATION (6VCX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 6VC & 6VCX Solids Handling Wastewater Pumps High Operating
More informationRS Series Multi-stage, Ring Section Pump For Pressures to 1,500 PSI
RS Series Multi-stage, Ring Section Pump For Pressures to 1,500 PSI The RS Series The RS is our new process duty, horizontal ring section multi-stage pump. Designed for moderate to high pressure pumping,
More informationBulletin C Dean Pump Division. ANSI/ASME B73.1 Horizontal Process. ph2140 Telescoping Guard. ph2140 C-Face Adapter
Bulletin C 1.2.34.5 Dean Pump Division ANSI/ASME B73.1 Horizontal Process ph2140 Telescoping Guard ph2140 C-Face Adapter Dean Pump Series ph Centrifugal Process Pumps Capacities to 3200 GPM (726 m 3 /hr)
More informationAHLSTAR End Suction Single Stage Close Coupled Centrifugal Pump
Sulzer Pumps AHLSTAR End Suction Single Stage Close Coupled Centrifugal Pump The Heart of Your Process Main Applications AHLSTAR end suction single stage close coupled centrifugal pumps are designed for
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/g-25 hydra-cell diaphragm pump. H/G-25 Specialized Designs
H/g-25 hydra-cell diaphragm pump H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
More informationD/G-12 Series. Up to 8 gpm (30.3 l/min)
D/G-12 Series Up to 8 gpm (3.3 l/min) D/G-12 Vertical Applications The D/G-12 is specifically designed for vertical pumping installations such as machine tool cooling applications. D/G-12 shown with Hydra-Cell
More informationDuctile Iron, Jacketed Pumps: Catalog Section 1602 Cast Iron, Non-Jacketed Pumps: Catalog Section 1401 HL4126A
Page 1601.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
More informationSELF-PRIMING, HIGH-EFFICIENCY PUMPS
SELF-PRIMING, HIGH-EFFICIENCY PUMPS GRpumps.com S U P E R U S E R I E S V A R I A T I O N S Super U Series pumps are available in 3", 4" and 6" discharge sizes. They are capable of handling spherical solids
More informationCENTRIFUGAL PUMPS GAS ENGINE FTSP FEATURES APPLICATIONS SPECIFICATIONS
FEATURES Volute: Ductile iron rugged construction. Self-priming with priming and drain plugs. Removable front cover features a built-in check valve to facilitate priming Impeller: Cast iron semi-open,
More informationEN. 850 Filtrate Pumps. Technical Specification Pages
850 17.01.EN 850 Filtrate Pumps Technical Specification Pages 850 Series Filtrate Pump 850 17.01.EN This page left intentionally blank. 1.0 Overview. The 850 is Carver s filtrate pump line designed for
More informationPriox. The new range NOCCHI. Lenntech NOCCHI. Tel Fax waste water treatment
NOCCHI Lenntech info@lenntech.com Tel. +31-152-1-9 www.lenntech.com Fax. +31-152-1-289 The new range NOCCHI Priox waste water treatment submersible vortex pumps for waste water Nocchi Priox Submersible
More information103 bar (1500 psi) for Metallic Pump Heads
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 13 bar (15 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Brass pump head G35
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
More informationSelf-Priming Fiberglass Pumps
Fybroc Division SERIES 16 Self-Priming Fiberglass Pumps B U L L E T I N 16B1 FYBROC THE LEADER IN CORROSION-RESISTANT FIBERGLASS PUMPING EQUIPMENT Fybroc is the leading manufacturer of fiberglass reinforced
More informationD/G-10 Series. Up to 8 gpm (30.3 l/min) D/g-10 hydra-cell diaphragm pump. D/G-10 Specialized Designs
D/g-1 hydra-cell diaphragm pump D/G-1 Series Up to 8 gpm (3.3 l/min) D/G-1 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete
More informationHigh-Head, High Performance, Self-Priming Trash Pumps
MUNICIPAL INDUSTRIAL CONSTRUCTION / RENTAL AGRICULTURE High-Head, High Performance, Self-Priming Trash Pumps A History of Innovation Gorman-Rupp has been revolutionizing the pumping industry since 1933.
More informationITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.
ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features Superior Materials of Construction: AISI Type 316L
More informationDPS. The SSV Dual Pump System
DPS The SSV Dual Pump System A Full Range of Product Features The DPS series of 36L stainless steel vertical multi-stage pumps from G&L has been designed to provide reliable high pressure boosting to serve
More informationT100 Series Low Pressure Models T100E, T100F & T100H
T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 366 l/min (96 gpm) 145 bar (2100 psi) API 674 T100 Series low pressure model with Stainless Steel pump head Available
More informationMOTOR SPEED PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1442 Page 1442.
Page 1442.1 TABLE OF CONTENTS Features & Benefits...2 Standard Materials of Construction...2 Specifications...2 Model Number Key...3 Cutaway View & Pump Features...3 Dimensions C, F, FH Sizes...4 Dimensions
More informationMYERS 3MW VERTICAL DISCHARGE WASTEWATER PUMPS. Sewage, high-capacity sump, effluent
The Myers heavy-duty series pumps are designed for residential raw sewage and light commercial applications. The non-clogging two-vane impeller delivers high-efficiency pumping and easily handles trashy
More informationSelf-Priming Process Pumps with Patented Intelligent Monitoring. Lenntech
Self-Priming with Patented Intelligent Monitoring Lenntech info@lenntech.com Tel. +31-12-61-9 www.lenntech.com Fax. +31-12-616-289 Goulds 3796 Self-Priming Designed for Total Range of Industry Services
More informationSPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.
Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component
More informationRed Valve. The World Leader In Pinch Valve Technology MANUAL PINCH VALVES
Red Valve The World Leader In Pinch Valve Technology MANUAL PINCH VALVES Manual Red Valve Pinch Valves Same Face-to-Face As Gate, Plug, Or Ball Valves To 12" 100% Full Port Bi-Directional Droptight Shutoff
More informationAxial Flow Pump Type Ensival Moret CAHR
Axial Flow Pump Type Ensival Moret CAHR Axial Flow Pump Type Ensival Moret CAHR The CAHR pump range has been designed to handle both highly corrosive and abrasive liquids, as well as clear liquids and
More informationGoulds Model JC. Lenntech. Slurry Pump. Tel Fax
Goulds Model JC Slurry Pump Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Goulds JC Designed for Handling a Wide Range of Corrosive / Abrasive Slurries Capacities
More informationKP-C Series. Close Coupled End Suction Centrifugal Pumps. Installation, Operation and Maintenance
KP-C Series Close Coupled End Suction Centrifugal Pumps Installation, Operation and Maintenance PUMP MODEL NOMENCLATURE KP - 8 x 6 x 16 - E C - AI - BCM Pump Series Suction Pipe Size (in) Discharge Pipe
More informationJansen Pompentechniek T: +31(0) E:
1 1 VOGEL - Pumps with Channel Type Impeller, Design KS Capacity up to 500 m 3 /h (2200 USgpm) Head up to 45 m (150 feet) Speed up to 1450 min -1 (1450 r.p.m.) Sizes: DN 65 up to DN 150 (21/2 up to 6 )
More informationGoulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps
Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Goulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps Goulds 3186 Designed to Handle High Temperature and
More informationEBARA Self Priming Trash Pump. Type EFQT-EFQU
Type EFQT-EFQU Contents Section Page Model Designation 2 Features 3 Selection Chart 7 Dimension Drawings 20 Technical Data 24 Sectional View 25 1 Model Designation EFQ T 2 A MODEL TYPE EFQ self priming
More informationINDUSTRIAL PUMPS MODEL: D-35 PARTS MANUAL WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL INDUSTRIAL PUMPS IMPORTANT Record your pump model number and serial number here for easy reference: MODEL: D-35 Model No. Serial No. Date of Purchase When ordering parts or making inquiries
More informationSMALL PORTABLE PUMPS. Centrifugal and diaphragm self-priming portable pumps.
SMALL PORTABLE PUMPS Centrifugal and diaphragm self-priming portable pumps. SMALL PORTABLE PUMPS The range of small pumps was carefully chosen to ensure we can cover the maximum amount of applications.
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: 45 gpm (170.4 l/min) Maximum Pressure: 3500 psi (241 bar) T100 Series medium pressure model with Nickel Aluminum Bronze pump head Available
More informationG&L Pumps. TECHNICAL Brochure BAC8100. Series A-C 8100 SPLIT CASE PUMPS
TECHNICAL Brochure BAC8 Series A-C 8 SPLIT CASE PUMPS TABLE OF CONTENTS Useful Pump Formulas 2 Performance Curves 3-5 Materials of Construction (Standard) 6 Materials of Construction (Optional) 7 Pump
More informationPRODUCT BULLETIN MODEL SST SELF PRIMER
Bulletin 490SST Edition 1 Since 1935, American-Marsh has manufactured high quality and durable self - primer pumps. These products incorporate features that you have asked for. Oil lubricated bearings,
More informationSelection Chart Project: Model: Chk d: Date: C C V V V A CAPACITY
Selection Chart Project: Model: Chk d: Date: 45 (Ft) (m) 15.0 HZ (Synchronous Speed - 1800 RPM) 35 C2905-7 25.0 8.0 C1125-17 C15-1170 C2185-885 7.0 TOTAL HEAD 15 6.0 5.0 C1455-1170 V0494-1170 V0554-1170
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 1543 BPD 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel
More informationBlockpumps. Vogel Series LSB WITH HYDRAULICS ACCORDING TO ISO 2858
Blockpumps Vogel Series LSB WITH HYDRAULICS ACCORDING TO ISO 2858 Technical Data Performance: Capacity up to 450m 3 /h (1540USgpm) Head up to 150m (280feet) Speed up to 2950/3550rpm Pump Sizes: DN 25 up
More informationT100 Series High Pressure
T100 Series High Pressure Maximum Flow Rate: 26 gpm (98.4 l/min) Maximum Pressure: T100 Series high pressure model with Nickel Aluminum Bronze pump head Available to Meet API 674! Seal-less design eliminates
More informationVersatile, Reliable Pumps for a Wide Range of Applications D66 Series
Versatile, Reliable Pumps for a Wide Range of Applications D66 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More information390 Series Multi-Stage Vertical In-Line Centrifugal Pumps
Bulletin 390 /Rev. B 390 Series Multi-Stage Vertical In-Line Centrifugal Pumps Capacities to 400 G.P.M. (91 M 3 /HR) Heads to 800 Feet (243 Meters) Temperatures to 250 F (120 C) motralec 4 rue Lavoisier.
More informationG25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
More informationMYERS MODELS 4V AND 4VX
MYERS MODELS 4V AND 4VX SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4V) AND HAZARDOUS LOCATION (4VX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4V AND 4VX Solids Handling Wastewater Pumps The Right Choice
More informationVogel - Volute Casing Pumps. according to ISO 2828 / ISO 5199 Design LSN
Vogel - Volute Casing Pumps according to ISO 2828 / ISO 5199 Design LSN 1 Volute Casing Pumps - Design LSN - according ISO 2858 / ISO 5199 Performance Capacity up to 450 m 3 /h (1980 USgpm) Head up to
More informationfranklinwater.com 50 Hz VR SERIES Vertical Multi-Stage Pumps
franklinwater.com 5 Hz VR SERIES Vertical Multi-Stage Pumps 5 HZ VR SERIES VERTICAL MULTI-STAGE PUMPS Features 2 Applications 2 Pump Specifications Counter-Flange Kits Motor Specifications 4 Ordering
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA296 RA3146 RA3186 RA296 The smaller, foot mounted economy version of the air-cooled RA series
More informationMAH HORIZONTAL SLURRY PUMPS
MA H SLURRY PUMPS MAH HORIZONTAL SLURRY PUMPS Heavy duty, horizontal slurry pumps. High efficiency transfer of abraisive and high density slurries with extended wear life and reliable service intervals.
More informationEnd suction back pull-out pumps for general industry, mining, rural and building services
End suction back pull-out pumps for general industry, mining, rural and building WHY COMPROMISE? The TKL KL-ISO end suction, back pull-out pump range is anything but ordinary it is the result of an intensive
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel pump head
More informationHigh-Head, High-Performance, Self-Priming Trash Pumps
ULTRA V SERIES High-Head, High-Performance, Self-Priming Trash Pumps A HISTORY OF INNOVATION Gorman-Rupp has been revolutionizing the pumping industry since 1933. Many of the innovations introduced by
More information