BDB. DOUBLE INLET CENTRIFUGAL FAN with Backward Wheels
|
|
- Jennifer Holmes
- 6 years ago
- Views:
Transcription
1 BDB DOUBE INET ENTRIFUGA FAN with Backward Wheels
2
3 BDB Series DOUBE INET ENTRIFUGA FAN with Backward Wheels Kruger Ventilation Industries certifies that the BDB series shown herein is licensed to bear the AMA Seal. The ratings shown are based on tests and procedures performed in accordance with AMA publication 211 and AMA publication 311 and comply with the requirements of the AMA ertified Ratings Program.
4 BDB Series BDB Series Double Inlet entrifugal Fans Backward wheels The BDB series is DIDW centrifugal fans with high efficiency non-overloading backward curved impellers. The fans are suitable for supply or exhaust applications in commercial, process and industrial VA systems. Sizes of this series are in accordance with AMA standard R20. Type / Operating imit Each fan type has its maximum operating speed and power due to its mechanical design. The operating limit of different fan types of BDB series is set according to the requirement of class I, II and III limit as defined in AMA standard The BDB series is available in type S,, T, X or Z. Model 315 to 710 Type S- I Model 800 to 1400 Type T II I Model 1600 to 2000 Type X III II II Type Z III III Type S This type is supplied with mounting feet and can be mounted in three different orientations. The construction is mainly for OEM application which is subject to testing and approval. Fan Size : 315 to 710 Volume : 1900 to m3/h Total Pressure : up to 2000 Pa Type This type has frames fitted on both sides of the fan, providing better strength and rigidity. It allows mounting in four different orientations. Fan Size : 315 to 710 Volume : 1900 to m3/h Total Pressure : up to 2000 Pa Type T This type has a welded frame, giving increased stiffness and rigidity required for higher operating performance. Fan Size : 315 to 1400 Volume : 1900 to m3/h Total Pressure : up to 2500 Pa Type X/Z The structure is similar to type T but utilizes enhanced bearings to support higher dynamic load necessary for the increased performance. Fan Size : 315 to 2000 Volume : 1900 to m3/h Total Pressure : up to 4500 Pa Type Z is non-standard, for more information, please consult your nearest Kruger Office for details. 2
5 BDB Series BDB Twin Fan BDB series is also available in twin fan version, with two double inlet fans mounted on the same shaft. To select twin fans, use the curves of single fan with the following factors: Volume x 2 Absorbed Power x 2.15 Speed x 1.05 Noise + 3 db This series is available in type S2, 2 or T2 Performance of Twin fans is not AMA licensed. Type S2 Size: 315 to 500 Vol.: 5000 to 50000m 3 /h Type 2 Size: 315 to 500 Vol.: 5000 to 50000m 3 /h Type T2 Size: 355 to 630 Vol.: to 80000m 3 /h TENIA SPEIFIATION Wheel The wheel of BDB series is made of cold rolled sheet steel backward curved blades with polyester powder coating finish. ousing For all sizes except 1250 and above, the housing is manufactured in galvanized sheet steel with the housing fixed to the side plates in "pittsburg lock" form system. ousings for 1250 and 2000 are manufactured in mild steel finished with polyester powder coating finish. Fully welded steel plate housings with painted finish are available for all size upon request. Frame The frame is manufactured with galvanized angular bars for type "". For type "T" and "X", they are manufactured with sections of steel with polyester powder coating finish. Shaft Shafts are manufactured from 45 carbon steel using an automatic process for positioning and cutting of the keyways. All dimensional tolerances of the shaft are fully checked to ensure a precise fit. All shafts are then coated with an anti-corrosion varnish after assembly. 3
6 BDB Series Bearings Bearings used are either deep groove ball bearing with an adaptor sleeve or spherical roller bearings sealed at both sides for different duty application and are classified as below: Mounted in a rubber housing Mounted on cast iron supports with grease point Fan Type S T X SM Medium Duty M Medium Duty TM Medium Duty XM Medium Duty Bearing Duty eg. Model: BDB 450 M TX Extra eavy XX Extra eavy Fan Bearing Duty (, M, X) FanType(S,,T,X,Z) Fan Size (315, 355, ) Except TX, XX, UX extra heavy duty bearings, all bearings are lubricated for life and maintenance-free. If re-lubrication is necessary, it is recommended to use a lithium base grease suitable for all temperatures within the operational limits. Balancing Quality All wheels are statically and dynamically balanced to ISO1940 and AMA 204 G2.5 standard. All fans after assembly are trim-balanced to ISO1940 and AMA G2.5 standard. lean room application fans with balancing grade of G1.0 are available upon request. AESSORIES P3 asing Drain This option is available when fans are exposed to the atmosphere or operating in high humidity condition. Outlet Flanges Outlet flanges are available upon request. P4 Inspection Doors The inspection door can be supplied upon request. It can be supplied in one of the three positions (P3, P4 & P5). P5 Guards Inlet guards, discharge guards and non-drive end shaft guards are available on request. 4
7 BDB Series Fan Rotation and Discharge The rotation and discharge of the fan is in accordance with AMA standard The direction of rotation is determined from the drive side of the fan: W - clockwise rotation W - counter-clockwise rotation W90 W180 W270 W360 W90 W180 W270 W360 Motor Position W The position of the motor for belt drive centrifugal fan is in accordance with AMA standard ocation of motor is determined by facing the drive side of fan and designated by letters W, X, Y, or Z. Z X Y 100 orrection Factor, % motor power output Pole 4 & 6 Pole Motor Selection The power curves shown on each performance graph represent the absorbed power at the shaft of the fan measured in kw. To determine the power of the motor to be installed, a correction factor should be applied to compensate for transmission losses. For conversion to horsepower (P), use multiplying factor Motor power output (kw) Inlet Vane ontrol The inlet vane control enables energy saving that varies according to the vane control methods compared to traditional volume control methods. Fig.1 shows the volume reduction corresponding to the vane position. - with vane fully open (Pos 90 ) the volume will be 3% less than the catalogue performance. - with vane fully closed (Pos 0 ) the volume will be reduced by 75%. Performance of Inlet vane control is not AMA licensed. 5
8 BDB Series IV orientation and accessories The standard orientation and lever position for the IV is indicated in Fig.2. When ordering a complete fan with IV and accessories, please specify as follow: Fan orientation e.g. W270 lever position e.g. Pos. 45 o Example : Fan Model W270/P45 Fig. 1 Orientation IV evel Position Fig. 2 - IV Orientation and evel Position Dynamic Pressure Both dynamic pressure and outlet air velocity values shown on each graph are calculated base on the full discharge area, i.e. ducted outlet condition. With free outlet condition the velocity pressure is higher. To determine this new value multiply the velocity pressure of the ducted outlet obtained from the fan curve by the following correction factor K. K 1.67 Fan performance calculated with this correction factor is not licensed by AMA. Performance The performance data shown on each graph is derived from tests conducted in accordance to AMA Standard 210 Fig 12 installation type B (free inlet and ducted outlet condition). Ratings refer to the standard air density with the total pressure as a function of the air volume, using logarithmic scale. It is essential that the same installation type and test standards are used at all times when comparing fan performance. Noise The noise levels shown on each graph refer to the "A-weighted" sound power values and the data on the inlet side has been measured in accordance with AMA Standard 300 diag. 2 - configuration "B". The noise levels of fans are determined as follow : Sound power level - ("A" scale): w (A) as catalogue Octave band spectrum: w w(a) + w rel. db [refer to Kruger for more details] Sound pressure level: a) free field p(a) w(a) - (20log 10 d) -11 b) room conditions p(a) w(a) - (20log 10 d) -8 where d distance from fan (m) 6
9 BDB Series Performance The performance data shown on each diagram is derived from tests conducted in accordance to AMA Standard 210- Fig 12- Installation type B (free inlet and duct outlet condition). Ratings refer to standard air density with the total pressure as a function of the air volume, using logarithmic scale. It is essential that the same installation type and test standards are used at all time when comparing fan performance. According to AMA 205, BDB series can be classify as FEG 85~90 based on fan peak efficiency. The following is the explanation of FEG classification: 1. Fan size is the impeller diameter in mm. 2. The fan peak efficiency shall be calculated from the fan (total) pressure. 3. If this method is used for a direct driven fan, the fan efficiency is the impeller efficiency. 4. The FEG label for a given fan size is assigned when the fan peak efficiency is equal to or lower than the efficiency at the grade upper limit, and higher than the efficiency at the grade upper limit of the next lower grade for the fan size. 5. For any fan sizes larger than 1016 mm, the values of the grade upper limits are the same as for a size of 1016 mm. 6. No labels are considered for the fans with the fan peak total efficiency below FEG The values of efficiencies are calculated for fan sizes in the preferred R40 Series. 8. Not all available fan sizes are shown. Fan Efficiency Grades (FEG) for Fans without Drives (SI) AMA 205 7
10 BDB Series E am le of Sele tion Air Volume Q m 3 /h FEG 85 Op imit Type M. kw M. RPM l. I S l. II T l. III X Outlet Velocity V m/s Dynamic Pressure Pd 62 Pa Total Pressure Pt 1515 Pa Fan Speed N 1900 rpm Absorbed Power W 8 kw Total Efficiency 78 % Sound Power evel w(a) 90.3 db(a) - Performance shown is for Installation type B - free inlet, ducted outlet. Performance ratings do not include the effects of appurtenances (accessories). Power rating kw does not include transmission losses. - The A-weighted sound ratings shown have been calculated per AMA standard 301. Values shown are for inlet wi(a) sound power levels for installation type B - free inlet, ducted outlet. Ratings do not include the effect of duct end corrections. 8
11 BDB 315 FEG 90 Type S- T X M. kw M. rpm of appurtenances (accessories). Power rating kw does not include transmission losses. - The A-weighted sound ratings shown have been calculated per AMA standard 301. Values shown are for inlet wi(a) sound power levels for installation type B - free inlet, ducted outlet. Ratings do not include the effect of duct end corrections. 9
12 BDB 355 FEG 85 Type S- T X M. kw M. rpm of appurtenances (accessories). Power rating kw does not include transmission losses. - The A-weighted sound ratings shown have been calculated per AMA standard 301. Values shown are for inlet wi(a) sound power levels for installation type B - free inlet, ducted outlet. Ratings do not include the effect of duct end corrections. 10
13 BDB 400 FEG 85 Type S- M. kw 6 M. rpm 2500 T X of appurtenances (accessories). Power rating kw does not include transmission losses. - The A-weighted sound ratings shown have been calculated per AMA standard 301. Values shown are for inlet wi(a) sound power levels for installation type B - free inlet, ducted outlet. Ratings do not include the effect of duct end corrections. 11
14 BDB 450 FEG 85 Type M. kw M. rpm S T X of appurtenances (accessories). Power rating kw does not include transmission losses. - The A-weighted sound ratings shown have been calculated per AMA standard 301. Values shown are for inlet wi(a) sound power levels for installation type B - free inlet, ducted outlet. Ratings do not include the effect of duct end corrections. 12
15 BDB 500 FEG 85 Type M. kw M. rpm S T X of appurtenances (accessories). Power rating kw does not include transmission losses. - The A-weighted sound ratings shown have been calculated per AMA standard 301. Values shown are for inlet wi(a) sound power levels for installation type B - free inlet, ducted outlet. Ratings do not include the effect of duct end corrections. 13
16 BDB 560 FEG 85 Type S- M. kw 12 M. rpm 1700 T X of appurtenances (accessories). Power rating kw does not include transmission losses. - The A-weighted sound ratings shown have been calculated per AMA standard 301. Values shown are for inlet wi(a) sound power levels for installation type B - free inlet, ducted outlet. Ratings do not include the effect of duct end corrections. 14
17 BDB 630 FEG 85 Type S- T M. kw M. rpm X of appurtenances (accessories). Power rating kw does not include transmission losses. - The A-weighted sound ratings shown have been calculated per AMA standard 301. Values shown are for inlet wi(a) sound power levels for installation type B - free inlet, ducted outlet. Ratings do not include the effect of duct end corrections. 15
18 BDB 710 FEG 85 Type S- T M. kw M. rpm X of appurtenances (accessories). Power rating kw does not include transmission losses. - The A-weighted sound ratings shown have been calculated per AMA standard 301. Values shown are for inlet wi(a) sound power levels for installation type B - free inlet, ducted outlet. Ratings do not include the effect of duct end corrections. 16
19 BDB 800 FEG 85 Type T M. kw 22 M. rpm 1200 X Z of appurtenances (accessories). Power rating kw does not include transmission losses. - The A-weighted sound ratings shown have been calculated per AMA standard 301. Values shown are for inlet wi(a) sound power levels for installation type B - free inlet, ducted outlet. Ratings do not include the effect of duct end corrections. 17
20 BDB 900 FEG 85 Type T M. kw 30 M. rpm 1050 X Z of appurtenances (accessories). Power rating kw does not include transmission losses. - The A-weighted sound ratings shown have been calculated per AMA standard 301. Values shown are for inlet wi(a) sound power levels for installation type B - free inlet, ducted outlet. Ratings do not include the effect of duct end corrections. 18
21 BDB 1000 FEG 85 Type T X Z M. kw M. rpm of appurtenances (accessories). Power rating kw does not include transmission losses. - The A-weighted sound ratings shown have been calculated per AMA standard 301. Values shown are for inlet wi(a) sound power levels for installation type B - free inlet, ducted outlet. Ratings do not include the effect of duct end corrections. 19
22 BDB 1120 FEG 85 Type T M. kw 45 M. rpm 850 X Z of appurtenances (accessories). Power rating kw does not include transmission losses. - The A-weighted sound ratings shown have been calculated per AMA standard 301. Values shown are for inlet wi(a) sound power levels for installation type B - free inlet, ducted outlet. Ratings do not include the effect of duct end corrections. 20
23 BDB 1250 FEG 90 Type T M. kw 50 M. rpm 780 X Z of appurtenances (accessories). Power rating kw does not include transmission losses. - The A-weighted sound ratings shown have been calculated per AMA standard 301. Values shown are for inlet wi(a) sound power levels for installation type B - free inlet, ducted outlet. Ratings do not include the effect of duct end corrections. 21
24 BDB 1400 FEG 90 Type T M. kw 80 M. rpm 680 X Z of appurtenances (accessories). Power rating kw does not include transmission losses. - The A-weighted sound ratings shown have been calculated per AMA standard 301. Values shown are for inlet wi(a) sound power levels for installation type B - free inlet, ducted outlet. Ratings do not include the effect of duct end corrections. 22
25 Pt [Pa] FEG 85 BDB 1600 Op imit l.ii l.iii Type X Z M.kW M.RPM γ 1.22 kg/m3 η [%] kw N [rpm] w (A) [db(a)] Q [m3/s] Q [m3/h] V [m/s] Pd [Pa] of appurtenances (accessories). Power rating kw does not include transmission losses. - The A-weighted sound ratings shown have been calculated per AMA standard 301. Values shown are for inlet wi(a) sound power levels for installation type B - free inlet, ducted outlet. Ratings do not include the effect of duct end corrections. 23
26 BDB 1800 Pt [Pa] FEG 85 kw Op imit l. II l.iii Type X Z M.kW M.RPM kg/m N [rpm] w (A) [db(a)] Q [m3/s] Q [m3/h] V [m/s] Pd [Pa] of appurtenances (accessories). Power rating kw does not include transmission losses. - The A-weighted sound ratings shown have been calculated per AMA standard 301. Values shown are for inlet wi(a) sound power levels for installation type B - free inlet, ducted outlet. Ratings do not include the effect of duct end corrections. 24
27 BDB 2000 Pt [Pa] FEG 85 kw Op imit l. II l. III Type X Z M.kW M.RPM kg/m N [rpm] w (A) [db(a)] Q [m3/s] Q [m3/h] V [m/s] Pd [Pa] of appurtenances (accessories). Power rating kw does not include transmission losses. - The A-weighted sound ratings shown have been calculated per AMA standard 301. Values shown are for inlet wi(a) sound power levels for installation type B - free inlet, ducted outlet. Ratings do not include the effect of duct end corrections. 25
28 BDB 315- G h3 M E M A D BDB 450- G h3 M E M h2 h2 Ød-g6 h1 uxs F B J K Model A B D E F G J K M h1 h2 h3 S d SM uxs x x x16 A D Ød-g6 h1 uxs F B F J K Model A B D E F G J K M h1 h2 h3 S d SM uxs x x x x x18 26
29 BDB 315- R G B M E M A D F uxs R G B M E M A D F1 F Ød-g6 F uxs Ød-g6 P F J K Model A B D E F G J K M P R d M uxs x x x18 BDB 450- P F F1 F J K Model A B D E F F1 G J K M P R d M uxs x x x x x22 27
30 BDB 315- A D R G B F M E M Ød-g6 uxs P BDB 450- G D R B M E M F F J K Model A B D E F G J K M P R T d TM uxs x x x18 A F1 F uxs Ød-g6 P F F1 F J K Model A B D E F F1 G J K M P R T d TM uxs x x x x x x X x22 28
31 BDB T R G B M E N A D F Ød-g6 F uxs P F F J K Model A B D E F G J K M N P R T d TM uxs x x x22 29
32 BDB 315- A D R G B F M uxs E M Ød-g6 P F J K Model A B D E F G J K M P R d uxs x x x18 BDB 450- A D R G B F F1 F M uxs E M Ød-g6 P F F1 F J K Model A B D E F F1 G J K M P R d uxs x x x x x x X x22 30
33 BDB XX R G B M E N A D F Ød-g6 F uxs P F F J K Model A B D E F G J K M N P R d uxs x x x22 BDB X G B M E INSPETION DOOR A D Ød-g6 N P F F1 F J K 8 OES Ø28.00 Model A B D E F F1 G J K M N P d
34 Z BDB Z G B M E INSPETION DOOR A D Ød-g6 N P F F1 F J K 8 OES Ø28.00 Model A B D E F F1 G J K M N P d
35 BDB 315- G h3 M E N E A D h2 h1 uxs F B J K V J Model A B D E F G J K M V X h1 h2 h3 d uxs x x x16 BDB 450- G h3 M E N E h1 A D h2 uxs F B F J K V J Model A B D E F G J K M V X h1 h2 h3 d uxs x x18 33
36 B BDB 315- G B M E N E Model A B D E F G J K M P R V X d uxs x x x18 BDB 450- G B M E N E D R F A A D R F uxs P F J F F1 V K J uxs P F F1 F J V K J Model A B D E F F1 G J K M P R V X d uxs x x18 34
37 BDB 355-M A D R G B F M E N E uxs F P R G B M E J V J K Model A B D E F G J K M P R V X d uxs x x18 BDB 450-M N E A D F F1 F uxs P F F1 F J V K J Model A B D E F F1 G J K. M P R V X d uxs x x x x18 35
38 Shaft d d t t1 w z
39 OVERA DIMENSION BDB S SERIES W 90 (Pos Z) W 270 (Pos W) W 360 (Pos W) W 360 (Pos Z) 2 1 W W W W W 90 (Pos W) W 270 (Pos Z) W 360 (Pos W) W 360 (Pos Z) 1 2 W W W W Model Motor Frame Size (90) (270) 90/ 270 W * Wt (kg) W * The above weight does not include motor and drive unit as these will vary with supplier. * Wt (kg) 37
40 OVERA DIMENSION BDB SERIES W 90 (Pos Z) W 270 (Pos W) W 360 (Pos W) W 360 (Pos Z) 2 1 W W W W W 90 (Pos W) W 270 (Pos Z) W 360 (Pos W) W 360 (Pos Z) 1 2 W W W W 38 Model Motor Frame Size (90) (270) 90/ 270 W * Wt (kg) W * The above weight does not include motor and drive unit as these will vary with supplier. * Wt (kg)
41 OVERA DIMENSION - BDB T SERIES W 90 (Pos Z) W 270 (Pos W) W 360 (Pos W) W 360 (Pos Z) 2 1 W W W W W 90 (Pos W) W 270 (Pos Z) W 360 (Pos W) W 360 (Pos Z) 1 2 W W W W Model Motor Frame Size (90 ) (270 ) 90 / W *Wt (kg) 1 2 W * The above weight does not include motor and drive unit as these will vary with supplier. *Wt (kg) 39
42 OVERA DIMENSION - BDB T SERIES W 90 (Pos Z) W 270 (Pos W) W 360 (Pos W) W 360 (Pos Z) 2 1 W W W W W 90 (Pos W) W 270 (Pos Z) W 360 (Pos W) W 360 (Pos Z) 1 2 W W W W Model Motor Frame Size (90 ) (270 ) 90 / W *Wt (kg) 1 2 W * The above weight does not include motor and drive unit as these will vary with supplier. *Wt (kg) 40
43 OVERA DIMENSION - BDB X SERIES W 90 (Pos Z) W 270 (Pos W) W 360 (Pos W) W 360 (Pos Z) 2 1 W W W W W 90 (Pos W) W 270 (Pos Z) W 360 (Pos W) W 360 (Pos Z) 1 2 W W W W Model Motor Frame Size (90 ) (270 ) 90 / W *Wt (kg) 1 2 W * The above weight does not include motor and drive unit as these will vary with supplier. *Wt (kg) 41
44 OVERA DIMENSION - BDB X SERIES W 90 (Pos Z) W 270 (Pos W) W 360 (Pos W) W 360 (Pos Z) 2 1 W W W W W 90 (Pos W) W 270 (Pos Z) W 360 (Pos W) W 360 (Pos Z) 1 2 W W W W Model Motor Frame Size (90) (270) 90 / 270 W * Wt (kg) W * The above weight does not include motor and drive unit as these will vary with supplier. * Please consult Kruger for the overall dimension of Fan BDB 1600, 1800 & * Wt (kg) 42
45 Operational imits - "BDB" Maximum Absorbed Power Maximum Fan Speed Temperature Range / Min. -20 o S- kw T kw X kw Z kw S2-2 kw T2 kw S- rpm T rpm X rpm Z rpm S2-2 rpm T2 rpm S- Max. o T-X Max. o S2-2 Max. o T2 Max. o Diameter mm Wheel Weight kg Fan weight J PD²/4 kgm² S kg kg T kg X kg Z kg S2 kg kg T2 kg
46 entrifugal Fan Ordering Information Fan Details Fan type DIDW SISW Impeller type Forward urved Backward urved Others : (Please State) Model & size e.g. FSA 560 Drive type - belt, direct, coupling (if differ from standard) Arrangement (1 & 3 for bare shaft fan; 4, 8 & 12 for complete with drive system) Model : (If known) Belt Direct oupling Others : (Please State) Bare fan omplete with drive system Rotation & Discharge e.g. W 270 W W Motor position (refer to diagram) e.g. W W X Y Z Air Flow Rate Pressure (static & total) Fan RPM (if specified) Q : /S m 3 /h m 3 /min m 3 /s cfm SP : TP : Pa mm 2 O inwg Max. : Min. : Noise level db dba w : p : at Distance : m free field room condition corner / wall Ambient temperature Temp. : Air density, if differ from standard Density : kg/m 3 Altitude : m Motor Details Fittings Detail Power kw : Accessories Inspection door P : Drain plug Flexible duct Inlet vane control No. of Poles / 2P 4P 6P 8P Vibration Isolators: RPM Others : Rubber Spring (pls state RPM) Floor-mount eiling-hang Voltage 220V 415V 380V 440V 400V Others : Silencers : With pod Without pod Inlet Outlet Both inlet & outlet Phase 1 3 ounter-flanges : Flat -type U-type Inlet Outlet Frequecy 50 z 60 z Special Features Frame size IE : NEMA : Other Requirements Painting Powder coating Others : ot-dipped galvanizing Make, if specified Brand : Mfr. : Spark-resistant orrosion-resistant ountry : eat-resistant, temp. Smoke Spill, Max. temp. for r 44
47 K R U G E R G R O U P ( V E N T I A T I O N ) SINGAPORE (KVI) SINGAPORE (KEN) KRUGER VENTIATION INDUSTRIES PTE TD KRUGER ENGINEERING PTE TD No. 10 Buroh Street #06-06, West onnect Building, Singapore No. 10 Buroh Street #06-06, West onnect Building, Singapore Tel Fax Tel Fax mktg@krugerasia.com mktg@krugerasia.com Website: TAIAND (KVA) TAIAND (KVT) KRUGER VENTIATION INDUSTRIES ASIA O. TD. KRUGER VENTIATION IND. (TAIAND) O. TD 30/105 Moo 1, Sinsakorn Industrial Estate, 30/105 Moo 1, Sinsakorn Industrial Estate, hetsadawithi Road, Khok Kham Mueng, Samuthsakorn 74000, Thailand hetsadawithi Road, Khok Kham Mueng, Samuthsakorn 74000, Thailand Tel Fax Tel Fax mktg@krugerventasia.co.th mktg@kruger.co.th MAAYSIA TAIPEI KRUVENT INDUSTRIES (M) SDN BD KRUGER VENTIATION (TAIWAN) O. TD ot 850, Jalan Subang 7, Taman Perindustrian Subang, No. 157, Ping-an Rd, engfeng Village, 47500, Subang Jaya, Selangor D.E. Dayuan Shiang Taoyuan ounty 337, Taiwan Tel Fax Tel Fax mktg@kruger.com.my sales@krugertwn.com.tw SANGAI GUANGZOU SANGAI KRUGER VENTIATION O. TD No. 500 Yuanguo Road, Anting, Jiading, Shanghai P.R. hina GUANGZOU KRUGER VENTIATION O. TD No. 9 uahui Road, uashan, uadu, Guangzhou, P.R. hina Tel Fax Tel Fax / shkruger@krugerchina.com gzkruger@krugergz.com BEIJING WUAN BEIJING KRUGER VENTIATION O. TD evel 7, A Block, Rising International Building, 29 Jingai San Road, BDA, WUAN KRUGER VENTIATION O. TD No. 805, uian Ave, Dongxihu District, Wuhan, ubei, P.R. hina Beijing, P.R.hina Tel / / Tel Fax Fax krugertj@krugertj.com whkruger@krugerwh.com TIANJIN ONG KONG TIANJIN KRUGER VENTIATION O. TD KRUGER VENTIATION (ONG KONG) IMITED No.168 Anyuan Road, Jingjin Science and Technology Park Flat, 9/F, Yeung Yiu hung (No.8) Industrial Building, Wuqing District, Tianjin, hina 20 Wang oi Road, Kowloon Bay, Kowloon, ong Kong Tel / Fax Tel Fax krugertj@krugertj.com info@kruger.com.hk PIIPPINES AUSTRAIA KRUGER M&E INDUSTRIES ORPORATION S&P-KRUGER AUSTRAIA PTY TD FAPI ompound, E. Rodriguez Ave. 2 unningham St, Tunasan, Muntinlupa ity 1773, Philippines Moorebank N.S.W Tel /4/6/7, Fax Tel Fax mktg@krugerph.net info@sandpkruger.com.au INDONESIA INDIA P.T. KRUGER VENTIATION INDONESIA KRUGER VENTIATION INDUSTRIES (INDIA) PVT TD J. Teuku Umar No.20, Kruger entre, Mumbai-Nasik ighway, Karawaci - Tangerang 15115, Indonesia Kalamgaon, Shahapur, Thane , Maharashtra, India Tel / Fax Tel / Fax mktg@krugerindo.co.id sales@krugerindia.com KOREA INDIA (NORT) NEOMATE O. TD KRUGER VENTIATION INDUSTRIES (NORT INDIA) PVT TD , Ace igh Tech ity B/D, 775 Gyeongin-ro, Plot No , Sector - 59, Ballabgarh, Faridabad , aryana, India Yeongdeungpo-gu, Seoul, Korea. Postal ode Tel / Tel Fax Fax y7890@neomate.co.kr sales.kni@krugerindia.com DUBAI VIETNAM KRUGER VENTIATION INDUSTRIES, GUF BRAN KRUGER VENTIATION INDUSTRIES (VIETNAM) O. TD Jebel Ali Free Zone Area (JAFZA) ot A7. 2-4, 2 Road, Bourbon An oa IP, An oa, P.O. Box No , Dubai, UAE Trang Bang Dist., Tay Ninh Province, Vietnam Tel / Fax Tel /01/02 - Fax johncs@krugerasia.com mktg@krugervn.com MYANMAR KRUGER VENTIATION (MYANMAR) O.,TD Room No. F21, Thiri Yadanar Whole Sale Market, (tawunbe) Toe hae Ward, North Okkalapa Township, Yangon. Tel /2/3 htoon@krugermm.com The company is always improving and developing its products, therefore the company reserves the right of making changes to the illustrated products. ertified dimension can be provided upon request. Edition 3 Printed on Feb 2013
48 Kruger Ventilation Industries Pte td No. 10 Buroh Street #06-06, West onnect Building, Singapore Tel Fax Website: No. - AT008.E3 November 2011 A member of
ASA. SINGLE INLET CENTRIFUGAL FAN with Airfoil Wheels
ASA SINGE INET ENTRIUGA AN with Airfoil heels ASA Series SINGE INET ENTRIUGA AN with Airfoil heels Kruger Ventilation Industries certifies that the ASA series shown herein is licensed to bear the AMA Seal.
More informationKAT. DOUBLE INLET CENTRIFUGAL FAN with Forward Wheels
KAT DOUBLE INLET CENTRIFUGAL FAN with Forward Wheels KAT Series DOUBLE INLET CENTRIFUGAL FAN with Forward Wheels Kruger Ventilation Industries Asia Co., L td certifies that the KAT series : version S
More informationBSB. SINGLE INLET CENTRIFUGAL FAN with Backward Wheels
BSB SINGE INET ENTRIFUGA FAN with Backward heels BSB Series SINGE INET ENTRIFUGA FAN with Backward heels Kruger Ventilation Industries certifies that the BSB series shown herein is licensed to bear the
More informationKAT. DOUBLE INLET CENTRIFUGAL FAN with Forward Wheels
KAT DOUBLE INLET CENTRIFUGAL FAN with Forward Wheels KAT Series DOUBLE INLET CENTRIFUGAL FAN with Forward Wheels Kruger Ventilation Industries certifies that the KAT series : version S and C - model 9-7
More informationBSB SINGLE INLET CENTRIFUGAL FAN with Backward Wheels
BSB SINGE INET ENTRIUGA AN with Backward heels BSB Series SINGE INET ENTRIUGA AN with Backward heels Kruger Ventilation Industries certifies that the BSB series shown herein is licensed to bear the AMA
More informationBSB. SINGLE INLET CENTRIFUGAL FAN with Backward Wheels
BSB SINGE INET ENTRIUGA AN with Backward heels BSB Series SINGE INET ENTRIUGA AN with Backward heels Kruger Ventilation Industries certifies that the BSB series shown herein is licensed to bear the AMA
More informationBNA. PLENUM FAN with Backward Wheels
BNA PLENUM FAN with Backward Wheels BNA Series PLENUM FAN with Backward Wheels BNA Series BNA Series Plenum Fans Backward wheels Kruger Plenum Fans are designed for air handling applications where the
More informationKAT. DOUBLE INLET CENTRIFUGAL FAN with Forward Wheels
KAT DOUBLE INLET ENTRIFUGAL FAN with Forward Wheels KAT Series DOUBLE INLET ENTRIFUGAL FAN with Forward Wheels Kruger Ventilation Industries certifies that the KAT series : version S and - model 9-7 to
More informationADA-BDA-BDB-FDA-KAT ASA-BSB-BSA-FSA
General Instructions (Centrifugal Fan) ADA-BDA-BDB-FDA-KAT ASA-BSB-BSA-FSA IGB016.E1/0902 This manual is to guide the users in the proper storage, installation, operation and maintenance procedures to
More informationBDB DIDW CENTRIFUGAL FAN with Backward Wheel TYPE X TYPE T
DIDW CENTRIFUGAL FAN with Backward Wheel BDB 0 BDB 0 is DIDW centrifugal fan with high efficiency nonoverloading backward curved impeller. The wheel of BDB 0 is made of cold rolled sheet steel with polyester
More informationVQ N SINGLE INLET INDUSTRIAL FAN. with Backward Wheels
VQ N SINGLE INLET INDUSTRIAL FAN with Backward Wheels VQN Series SINGLE INLET INDUSTRIAL FAN with Backward Wheels Kruger Ventilation Industries Pte Ltd certifies that the VQN Series model 711 to 2001
More informationGeneral Instructions (Plenum & Plug Fan) BNA-ANA- BPA-APA
General Instructions (Plenum & Plug Fan) BNA-ANA- BPA-APA IGB030.E0/1203 1 This manual is to guide the users in the proper storage, installation, operation and maintenance procedures to ensure maximum
More informationAXIAL FANS Catalogue CN0050C01 May 2008
ADTA AXIAL FANS Catalogue CN0050C01 May 2008 ADTA AXIAL FANS Catalogue CN0050C01 May 2008 Construction Specifications Impellers: Breezax aerfoil blades are available in four types of material: Glass Reinforced
More informationBSB SINGLE INLET BELT DRIVEN CENTRIFUGAL FANS WITH BACKWARD CURVED IMPELLERS
SINGLE INLET BELT DRIVEN CENTRIFUGAL FANS WITH BACKWARD CURVED IMPELLERS BSB 03.06-01 BSB SINGLE INLET BELT DRIVEN CENTRIFUGAL FANS WITH BACKWARD CURVED IMPELLERS Description Construction Fans are not
More informationCNA-CNB CNA-CNB CENTRIFUGAL FANS STANDARD TEMPERATURES AND EX
NA-NB NA-NB ENTRIFUGAL FANS STANDARD TEMPERATURES AND EX PRODUT FATS PRODUT The centrifugal fans type NA and NB are robust and versatile fans of the single-inlet type with backward-curved blades. APPLIATION
More informationATZAF DOUBLE INLET CENTRIFUGAL FANS WITH AIRFOIL BACKWARD CURVED BLADES
ATZAF DOUBLE INLET CENTRIFUGAL FANS WITH AIRFOIL BACKWARD CURVED BLADES COMEFRI USA: Manufacturing and Warehouse facilities in Hopkinsville, KY. Total facility: 125,000 sq.ft. Producing centrifugal fans
More informationThe Straight Way. Rectangular Cabinet Fan. Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and heating Products Tunnel Fans
Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and heating Products Tunnel Fans The Straight Way Rectangular Cabinet Fan Systemair India Pvt. Ltd. certifies that the Rectangular
More informationUnobox units with backward curved centrifugal impellers
Unobox Fans Unobox units with backward curved centrifugal impellers Type Code UNO 67-450 -4 E W Unobox Box size 50=500mm ; 67=670mm 80=800mm ; 102=1020mm Impeller diameter Number of poles D - Three Phase
More informationCentrifugal Fans belt driven. TD_CFB-RDY_EN Issue 1.1 EN July 2013
Centrifugal Fans belt driven TD_CFB-RDY_EN Issue 1.1 EN July 2013 Y D R 1 AMCA Nicotra Gebhardt S.p.A. certifi es that the fan shon herein is licensed to bear the AMCA Seal. The ratings shon are based
More informationCentrifugal Inline Fans Models SQ-M and BSQ-M. Direct and Belt Drive
Centrifugal Inline s Models SQ-M and BSQ-M Direct and Belt Drive July 2010 Centrifugal Inline Duct s Greenheck's model SQ-M and BSQ-M centrifugal square inline fans feature a unique combination of installation
More informationCENTRIFUGAL FANS. Single Width, Single Inlet WFS & WBS Series WTC TECH CO., LTD. CENTRIFUGAL FANS Single Width, Single Inlet WFS & WBS Series
WTC TECH CO., LTD. CENTRIFUGAL FANS Single Width, Single Inlet WFS & WBS Series C. October CENTRIFUGAL FANS Single Width, Single Inlet WFS & WBS Series WTC Centrifugal Fans & AMCA Certification WTC Tech
More informationSoler & Palau. Research Design and High Technology
Research Design and High Technology Soler & Palau Sales Department C/ Llevant, 4 Polígono Industrial Llevant 08150 Parets del Vallès (Barcelona) - SPAIN Tel. +34935719420 ax +34935719421 e-mail: oem.info@solerpalau.com
More informationCENTRIFLOW 3D WITH AC MOTOR >> Technical catalogue
CENTRIFLOW 3D plug fan WITH AC MOTOR >> Technical catalogue air comfort Centriflow 3D 2 GMEB CentriFlow 3D - Technical Catalogue Contents GENERAL Description and survey chart Application... 3 General Survey
More informationSHELDONS ENGINEERING Inc. Sheldons Engineering Product Index
SHELDONS ENGINEERING Inc. Sheldons Engineering Product Index AIR HANDLING-RADIAL BLADE CENTRIFUGAL FAN XB GENERAL The centrifugal fan shall be designed and manufactured by Sheldons Engineering to ensure
More informationCONTENTS. Page. Adjustable Axial Pitch Flow Fans 3. Dimensions 4. AP056 Performance Curves 5. AP056 Sound Performance 6. AP063 Performance Curves 7
CONTENTS Page Adjustable Axial Pitch Flow Fans 3 Dimensions 4 AP056 Performance Curves 5 AP056 Sound Performance 6 AP063 Performance Curves 7 AP063 Sound Performance 8 AP071Performance Curves 9 AP071 Sound
More informationMAJAX-2 GENERAL SPECIFICATION
MAJAX-2 GENERAL SPECIFICATION Majax-2 axial flow fans are manufactured in diameters ranging from 315mm to 2000mm (available in 2250mm on request), and incorporate manually adjustable pitch aluminium bladed
More informationIntroducción Introduction
Introducción Introduction S&P - LA EMPRESA Desde su fundación en el año 1951, en la localidad de Ripoll (España), Soler & Palau, S.A. se ha convertido, desde hace ya bastantes años, en uno de los líderes
More informationBSB. Single Inlet Centrifugal Fan. with Backward Wheels
Single Inlet Centrifugal an with Backward Wheels Introducción Introduction S&P - LA EMPRESA Desde su fundación en el año 1951, en la localidad de Ripoll (España), Soler & Palau, S.A. se ha convertido,
More informationFRP Fans: CLUB Series Performance and Technical Information
FRP Fans: CLUB Series 1500-7300 Performance and Technical Information Verantis Environmental Solutions Group provides solutions for most common and complex situations including repair, rebuilding, field
More informationSoler & Palau. Research Design and High Technology
Research Design and High Technology Soler & Palau Sales Department C/ Llevant, 4 Polígono Industrial Llevant 08150 Parets del Vallès (Barcelona) - SPAIN Tel. +34935719420 ax +34935719421 e-mail: oem.info@solerpalau.com
More informationBULLETIN 456. July 1997 VANEAXIAL FANS. Type W Direct Drive/Belt Driven. Model VW Direct Drive. Model VWBD Belt Driven
BULLETIN 456 July 1997 VANEAXIAL FANS Type W Direct Drive/Belt Driven Model VW Direct Drive Model VWBD Belt Driven Aerovent certifies that the Type W Vaneaxial Fans shown herein are licensed to bear the
More informationhore PRODUCT CATALOGUE nd Offsh arine an ms for Ma & Refrig CENTRIFUGAL FANS HV VAC &
hore nd Offsh arine an ms for Ma geration System & Refrig HV VAC & PRODUCT CATALOGUE CENTRIFUGAL FANS ! "# $ % & " ' (! ) * +,+( -../01..2 PRODUCT CATALOGUE 73-16 CENTRIFUGAL FANS CONTENT PAGE 1. CENTRIFUGAL
More informationDynamically-balanced impellers with extremely robust cores CMP T 5.5
Medium pressure, single inlet centrifugal fans with sheet steel casing and impeller Fan: Sheet steel casing. Forward-curved impeller made of galvanised sheet steel. 38-2M model casing in cast aluminium.
More informationBifurcated Case Axial Fans (BIFA)
Bifurcated Case Axial Fans (BIFA) Sizes 250 to 1000 dia Motors protected to IP55 Motor insulation Class F Maximum ambient temperature 200 C Speed controllable via transformer or inverter (when the ambient
More informationAAVC. Accessories HIGH PRESSURE FANS HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES:
AAVC HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES: Accessories Fan made of Fe360 sheet. The fan paint finish is based on a Qualicoat polyester powder coating stoved at 200ºC, with an average
More informationROOFMASTER STEF-HT ROOF FAN
fire safety Air movement Roof Fans ROOFMASTER STEF-HT ROOF FAN» Technical CATALOGuE Contents ROOFMASTER STEF-HT...3 Performance Data...4 Performance Table...5 General description...6 Fan Chart-explanation
More informationCentrifugal Utility Fans - SFD/SFB
C H F D B G E A Centrifugal Utility Fans - SFD/SFB SFB STANDARD CONSTRUCTION FEATURES HOUSING: Heavy gauge steel housing with Lock-seam construction Unit support angles with prepunched mounting holes Adjustable
More information400ºC/2h centrifugal roof fans with horizontal or vertical air outlet CHT 200 4T BS. Installed capacity
400ºC/2h centrifugal roof fans with horizontal or vertical air outlet : 400ºC/2h centrifugal roof fans with horizontal air outlet, hood in aluminium : 400ºC/2h centrifugal roof fans with vertical air outlet,
More informationSHELDONS ENGINEERING Inc. Sheldons Engineering Product Index
SHELDONS ENGINEERING Inc. Sheldons Engineering Product Index www.sheldonsengineering.com AIR HANDLING-RADIAL BLADE CENTRIFUGAL FAN 9000 XB GENERAL The centrifugal fan shall be designed and manufactured
More informationGood Enough Never Is. Plug Fan SERIES 12
Plug Fan SERIES 12 Good Enough Never Is The Hartzell Difference Combine Hartzell QUALITY with your PRODUCT for a BETTER CHOICE for your customers! GOOD ENOUGH NEVER IS. Hartzell Air Movement is the industrial
More informationLOW STATIC FAN COIL UNITS District Cooling Chilled Water Application
STATIC FAN COIL UNITS District Cooling Chilled Water Application CLASSIFIED INSULATION & FILTER MEDIA GFC LD Series Cooling Capacity Range 9,690 yo 46,064 BTU/HR (4 ROWS ) GFC-LD-TC-10-13 3 General Specifications
More informationCHILLED WATER DUCTED FAN COIL
SD CHILLED WATER DUCTED AN A Series B Series (Double Skin) General abricated with a rigid galvanized steel casing. The DIDW centrifugal fans have balanced, galvanized steel, and forward curved blades.
More informationCENTRIFLOW 3D WITH AC MOTOR >> Technical catalouge
CENTRIFLOW 3D plug fan WITH AC MOTOR >> Technical catalouge air comfort Centriflow 3D 2 GMEB CentriFlow 3D - Technical Catalouge Contents GENERAL Description and survey chart Application... 3 General Survey
More informationTubular Centrifugal Inline Fans Page Introduction... 2 Construction Features... 3 Specification and Dimension Data TCN-D (Inline Fan- Direct
Tubular Centrifugal Inline Fans Page Introduction........................................... 2 Construction Features.................................. 3 Specification and Dimension Data TCN-D (Inline Fan-
More informationDefining Innovation. DIRECT DRIVE backward inclined fans TYPE TCBI
Defining Innovation. DIRET DRIVE backward inclined fans For dust collectors TYPE TBI BUETIN 330 February 2011 Direct Drive Backward Inclined Fans Twin ity Fan & Blower offers the type TBI Backward Inclined
More informationSECTION AXIAL HVAC FANS
SECTION 233413 - AXIAL HVAC FANS 1. PART 1 GENERAL 1.1. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationCHMT Series, F Rated Fans
CNTRIFUGAL SINGL INLT FANS CT Series, F400 120 Rated Fans Officially approved to N12101-3 standard (certificate number 0370-CPD-0348) Range of single inlet direct drive centrifugal fans designed for smoke
More informationContents. Identification
Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions
More informationFiberglass Axial Flow Fans. Series 28 Series 28B. Series 34 Series 35 Series 35V. Series 29 Series 29B HARTZELL
Fiberglass Axial Flow Fans Series 28 Series 28B Series 29 Series 29B Series 34 Series Series V BUILT WITH HONOR HARTZELL FAN, INC PIQUA, OHIO USA HARTZELL Hartzell Fan, Inc., Piqua, Ohio 46 Bulletin A-39-N
More informationExplanation of AR Series Ventilator Products. Fan type code D S AR AE
Series Axial Fan Explanation of Series Ventilator Products Fan type code 450-7 /26 D -2 F400 Smoke Extract Fan 400 C, 300 C Number of Poles D S Three Phase Single Phase AE AE Features and construction
More informationPEDESTAL PLUG FANS FPP SERIES, HIGH EFFICIENCY CATALOGUE
PEDESTAL PLUG FANS FPP SERIES, HIGH EFFICIENCY CATALOGUE FPP SERIES, PEDESTAL PLUG FANS, HIGH EFFICIENCY MOTORS WHEEL DIAMETER: 250mm TO mm MOTORS 0.75kW TO 37kW HOW TO SELECT 3 SPECIFICATIONS 4 INSTALLATION
More informationSECTION CENTRIFUGAL HVAC FANS
SECTION 233416 - CENTRIFUGAL HVAC FANS 1. PART 1 GENERAL 1.1. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationTubular Centrifugal Fans
Tubular Centrifugal Fans Model TCB Inline - Horizontal or Vertical Roof Upblast and Roof Supply March 2007 Tubular Centrifugal Fans The TCB series of inline centrifugal fans is designed for ducted inline,
More informationBPF. Centrifugal Plug Fans
BPF Centrifugal Plug Fans Introduction INTRODUCTION Plug Fans S&P - THE COMPANY Soler & Palau was founded in 1951 in Ripoll (Spain) and since this date has become one of the world s leading companies engaged
More informationBACKWARD INCLINED FANS FOR DUST COLLECTORS
Twin ity Fan INDUSTRIA PROESS AND OMMERIA VENTIATION SYSTEMS BAKWARD ININED FANS FOR DUST OETORS MODE TBI ATAOG 330 FEBRUARY 2011 WWW.TF.OM BAKWARD ININED FANS Twin ity Fan & Blower offers the type TBI
More informationCAS 460 2T 7.5. Impeller size motor poles 2=3500 r/min. 60 Hz. Installed power
CAS CAS: High pressure, single inlet centrifugal fans with sheet steel casing and impeller : High pressure, single inlet centrifugal fans with sheet steel casing and impeller, fitted with acoustic attenuators
More informationS ACON SEACON SEACO QUIPMEN EQUIPMENTS SEACON EQUIPMENTS
S ACON EQ NTS ACON E NTS A S EQ A TS TS TS TS TS E AC AC AC AC AC AC S S UIP IPME IPME QU P QUI QUI EQ EQUI Q EQ EQ EQ EQ EN EN SE SE SEAC AC AC AC AC AC AC ACO EQUIP E MEN SEACO EQUIPMEN A EQU EQU AC
More information42HS Fan Coil Unit (High Static Pressure)
42S Fan Coil Unit (igh Static Pressure) Air Volume: 1360~3400m3/h Turn To The Experts Founded by the inventor of modern air conditioning, Carrier is the world s leader in high-technology heating, air-conditioning
More informationFAN & BLOWER CENTRIFUGAL FANS
FAN & BLOWR CNTRIFUGAL FANS INTRODUCTION GNRAL PRODUCT RANG FANS BY FANTCH - INTRACTIV PRODUCT SUIT SLCTION PROGRAM PRFORMANC CONSTRUCTION The Fan & Blower range of centrifugal fans is marketed to the
More informationAND AXIAL FLOW FANS ECOFIT
AND AXIAL FLOW FANS with adjustable blades as standard fans, explosion proof design and smoke fans ECOFIT Rosenberg East Asia Pte Ltd 71 Ubi Crescent #08-04 Excalibur Centre Singapore 408571 Tel: +65 6846
More informationAir Moving Solutions. VENTILATING SETs BCV BCVU5 BCVU2 BCVSH BAV FCV
Air Moving Solutions. VENTILATING SETs BCV BCVU5 BCVU2 BCVSH BAV FCV CATALOG 600 March 2012 VentilatingSets Models BCV BCVU5 BCVU2 BCVSH BAV FCV Twin City Fan s line of utility ventilating sets is one
More informationDuct mounted fans. axial flow. Pacific HVAC Engineering Tel. Australia NZ
Duct mounted fans axial flow Pacific HVAC Engineering 215 www.pacifichvac.com Tel. Australia 13 733 833 NZ 8 1 326 6 5 4 3 2 1 5 1 15 2 7 6 5 4 3 2 1 3 2.5 2 1.5 1.5 1 15.5 1 1.5 2 2.5 3 3.5 Volume m 3
More informationDefining Innovation. backward curved FANs
Defining Innovation. high efficiency industrial backward curved FANs TYPE HIB BULLETIN 00-B May 20 HIB High-Efficiency Industrial Backward-Curved Fans Model HIB fans from Twin City Fan & Blower employ
More informationInline Fans [ 14 ] * UL is optional and must be specified.
XTIF, XIB and XID models are listed for electrical (UL/C-UL US 705) File no. E40001. Model XTIF is available with the UL 762 Listing (Power Ventilators for Restaurant Exhaust Appliances). Accurex, LLC
More informationSeries TDA DIRECT DRIVEN MODEL: TDA- 450/9AA/8-8/ / Construction. Airflow Direction
DIRECT DRIVEN Series TDA Construction Double flanged casing is produced in mild steel or galvanised steel, available in short and long cased. The impeller having manually adjustable pitch blades is made
More informationHigh Static Fan Coil Units YDFC
Static Fan Coil Units YDFC Contents contents Product information...3 Nomenclature & features...4 Features & benefits...4 Product details...5 Technical specifications...6 Unit dimensions ST type...7 Unit
More informationVaneaxial Fans. Series 25 Series 53 Series 53C Series 54 Series 55 HARTZELL. Hartzell Fan, Inc., Piqua, Ohio
Vaneaxial Fans Series 25 Series 53 Series 53C Series 54 Series 55 BUILT WITH HONOR HARTZELL FAN, INC PIQUA, OHIO USA HARTZELL Hartzell Fan, Inc., Piqua, Ohio 45356 February 2008 Index Model Code Explanation...Page
More informationUTILITY BLOWERS. Models: BIUB / BIUBR / BIUBSH BAUB / DFC / FCUB. The Industrial Choice.
UTILITY BLOWERS Models: BIUB / BIUBR / BIUBSH BAUB / DFC / FCUB The Industrial Choice. CATALOG 760 April 2017 Utility Blowers Overview Utility Blowers Aerovent s line of utility blowers is one of the most
More informationair handling units YAH
air handling units YAH Air Handing Units YAH Series YORK YAH series ceiling-mounted air handling units are terminal points of central air-conditioning systems. They are designed for fresh air units or
More informationADA. Double Inlet Centrifugal Fan. with Airfoil Impellers
Double Inlet Centrifugal an with Airfoil Impellers Introducción Introduction S&P - LA EMPRESA Desde su fundación en el año 1951, en la localidad de Ripoll (España), Soler & Palau, S.A. se ha convertido,
More informationTDF Double Inlet Backward Curve Centrifugal Fans
TDF Double Inlet Backward Curve Centrifugal Fans Product overview TDF series of backward curved centrifugal fans are used in a wide variety of applications designed for high efficiency and low noise.
More informationCENTRIFUGAL DIRECT DRIVE FANS CMT-CMB
CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB Applications The CMT-CMB range of fans are suitable for many general and OEM ventilation applications where the extract of nonhazardous heated air is required. The
More informationBAC, BAF, BAH Central Station Air Handlers
PRODUCT DATA & INSTALLATION Bulletin B80-BA-PDI-5 Part # 1097717 PRODUCT SUPPORT web: b-rp.ca/bah email: ahu@b-rp.ca call: 1-844-893-3222 x527 scan: BAC, BAF, BAH Central Station Air Handlers Indoor and
More information200, 9200 & 9200-VIB SERIES
DUCT VENTILATION 200 SERIES Indoor Applications, Insulated or Non-Insulated 9200 SERIES Heavy duty, Insulated Indoor or Outdoor Applications SUBJECT TO CHANGE WITHOUT NOTICE - 04/7 Optional motor, drive
More informationThe Industrial Choice. Model VB Direct Drive. Model VBBD Belt Driven VANEAXIAL FANS. Direct Drive & Belt Driven Model VB / VBBD
The Industrial Choice. Model VB Direct Drive Model VBBD Belt Driven VANEAXIAL FANS Direct Drive & Belt Driven Model VB / VBBD BULLETIN 466 November 2000 Contents Construction Features Belt Driven... 3
More informationBOX BLB Centrifugal Box Fan
Centrifugal Box Fan Select models available for next day delivery Product Overview 3 sizes from 260mm to 400mm Air volume flow rates up to 0.751m³/s Static pressures up to 733 Pa Suitable for operating
More informationMixed Flow Inline Fan, Model MFSI
Mixed Flow Inline Fan, Model MFSI TABLE OF CONTENTS 3 Introduction, Certifications & Listings 4 Features & Benefits 5 Options & Accessories 6 Dimensional Data 10 Performance Data 27 Sound Data 44 Engineering
More informationROOFMASTER STEF-HT ROOF FAN
fire safety Air movement Roof Fans ROOFMASTER STEF-HT ROOF FAN» Technical CATALOGuE Contents ROOFMASTER STEF-HT...3 Performance Data...4 Performance Table...5 General description...6 Fan Chart-explanation
More informationTURNING AIR INTO SOLUTIONS. UTILITY SETS DCV BCV BCVR BCVSH BAV DDF FCV
TURNING AIR INTO SOLUTIONS. UTILITY SETS DCV BCV BCVR BCVSH BAV DDF FCV CATALOG 600 March 2017 UTILITY SETS Model DCV Overview Utility Sets Twin City Fan s line of utility ventilating sets is one of the
More informationCabinet Fans & Smoke Spill Cabinet Fans
Cabinet s & Smoke Spill Cabinet s Catalogue CN0050C02 May-2016 Direct Drive Cabinet - Centrifugal Single Skin - CD-R1 Series Double Skin - CD-K-R1 Series DIDW Forward Curved (DD, DDM) with squirrel case
More informationCMB / CMT Series CENTRIFUGAL SINGLE INLET FANS. Centrifugal direct drive fans CMB/CMT 80 C. Impeller dynamically balanced
CENTRIFUGAL SINGLE INLET FANS CMB / CMT Series 80 C CONTINUOUS operation Range of centrifugal single inlet fans suitable for continuous extraction of airstreams temperature up to 80ºC (Series 1) or 150ºC
More informationSHELDONS ENGINEERING Inc. Sheldons Engineering Product Index
SHELDONS ENGINEERING Inc. Sheldons Engineering Product Index www.sheldonsengineering.com SQUARE BODY RADIAL BLADE CENTRIFUGAL FAN D6900 GENERAL SPECIFICATION. The centrifugal fan shall be designed and
More informationAMCA Seal Assures rating of Sound and Air performance. 2 year fan housing warranty, 1 year motor warranty
MODEL FEATURES Exhaust air up to 2,800 CFM in high static pressure applications up to 1 w.g. Direct drive units have low sound levels and quiet operation Ideal for applications where space is limited Non-overloading
More informationBDB. Double Inlet Centrifugal Fan. with Backward Wheels
Double Inlet Centrifugal an with Backward Wheels Introducción Introduction S&P - LA EMPRESA Desde su fundación en el año 1951, en la localidad de Ripoll (España), Soler & Palau, S.A. se ha convertido,
More informationDUCT-M HT F400/2h. Smoke exhaust ducted axial fan APPLICATIONS TECHNICAL SPECIFICATIONS VERSIONS ACCESSORIES ON REQUEST. May 2018 Catalog N 000 Rev.
DUCT-M HT F/h Smoke exhaust ducted axial fan APPLICATIONS The fans of the DUCT-M HT line have been designed to be employed in all the plants where it is prescribed the necessity to guarantee the smoke
More informationSECTION HVAC POWER VENTILATORS
SECTION 233423 HVAC POWER VENTILATORS 1. PART 1 GENERAL 1.1. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationOEM and Industrial Air Handling Specialist Snider Road, Mason, OH Telephone:
HDBI BLOWERS OEM and Industrial Air Handling Specialist BACKWARD INCLINED CLASS II CLASS III CLASS IV 797 Snider Road, Mason, OH 45040-915 Telephone: 51-57-000 Visit us at www.cincinnatifan.com for more
More informationTurbo Pressure Blowers
www.americanfan.com Bulletin VP4 Turbo Pressure Blowers Howden Industrial Fan Group American Fan / Joy Fan / Garden City Fan Features Heavy gauge continuously welded housings, reversible and rotatable
More informationGeneral TAHVIEH HAMOON Airfoil Centrifugal Fans Utilize the latest design techniques to product a quiet highly efficient air mover.
General TAHVIEH HAMOON Airfoil Centrifugal Fans Utilize the latest design techniques to product a quiet highly efficient air mover. Aerodynamically designed blades and air passages allow more air to be
More informationSQAF AIRFOIL BLOWERS CLASS IP CLASS II CLASS IIP CLASS III. OEM and Industrial Air Handling Specialist
OEM and Industrial Air Handling Specialist SQAF AIRFOIL BLOWERS CLASS IP CLASS II CLASS IIP CLASS III 69 Snider Road, Mason, OH 4040-913 Telephone: 13-3-0600 Visit us at www.cincinnatifan.com for more
More informationSQUARE INLINE CENTRIFUGAL FANS
Twin City Fan INDUSTRIAL PROCESS AND COMMERCIAL VENTILATION SYSTEMS SQUARE INLINE CENTRIFUGAL FANS DSI BSI CATALOG 40 FEBRUARY 07 SQUARE INLINE CENTRIFUGAL FANS Overview DSI BSI Twin City Fan & Blower
More informationROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE
ROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE Roofmaster STEC non-insulated version - Technical Catalogue 3 CONTENTS GENERAL DESCRIPTION Application/specification...4 Features...4
More informationEXHAUST FANS CUD & CUB UPBLAST FANS
EXHAUST FANS CUD & CUB UPBLAST FANS Suitable for roof or wall mount Backward inclined, non overloading wheels Spun aluminum housing Blades & inlets fabricated from aluminum Easy access to motor compartment
More informationAir Moving Solutions. low pressure mixed flow fans. QCLB QCLBR (Restaurant) QCLBSH (Smoke & Heat)
Air Moving Solutions. low pressure mixed flow fans QCLB QCLBR (Restaurant) QCLBSH (Smoke & Heat) BULLETIN 1070 February 2012 MixedFlowFans Models QCLB QCLBR QCLBSH Benefits of Mixed Flow Fans Twin City
More informationSize and Configurations
!!"#!""!"$%!!" &'()&('& AK Axial Flow Fans the high efficiency direct-driven fan with adjustable pitch impeller specially designed to operate with low noise emission and vibration that meets the stringent
More informationREVOLUTION SLCX Product Brochure
REVOLUTION SLCX Brochure Available for next day delivery with ELTA SELECT ATEX Long Cased Axial Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum
More informationSeries 8500 Centrifugal Swingout Fans Design 8510 Centrifugal Airfoil Design 8520 Centrifugal BI
Bulletin 8510-4 May 2000 Series 8500 Centrifugal Swingout Fans Design 8510 Centrifugal Airfoil Design 8520 Centrifugal BI Description Index Series 8500 Centrifugal Swingout Fans The Series 8500 Centrifugal
More informationVolute pumps. SJ-e. 50Hz
Volute pumps SJ-e 50Hz Volute pumps Cast-iron 2-Pole, direct driven type SJ-e Applications General water supply in buildings and apartments, etc Hot and cold water circulation Supply of industrial water
More informationTwin City Fan & Blower
BULLETIN 600 Twin City Fan & Blower September 2009 VENTILATING SETS TYPE BCV (Backward Inclined) TYPE BCVU5 (UL 705 Listed) TYPE BCVU2 (UL 762 Listed) TYPE BCVSH (UL Smoke & Heat) TYPE BAV (Airfoil) TYPE
More informationAxial fans. What s more, non-stock models are normally available within two weeks.
Axial fans 7 sees the introduction of a new production line at Xpelair s Peterborough plant for the Scimitar Sickle blade fans in Plate, Short Case and Roof versions up to 63mm. Scimitar will join an impressive
More information