T SERIES IP 68 PUSH-PULL CONNECTORS

Size: px

Start display at page:

Download "T SERIES IP 68 PUSH-PULL CONNECTORS"

Karin Snow
6 years ago
Views:

1 T SERIES IP 68 PUSH-PULL CONNECTORS

T series T series connectors have been specifically designed for outdoor applications. They include an inner sleeve and seals to prevent penetration of solids or liquids.

2 T series T series connectors have been specifically designed for outdoor applications. They include an inner sleeve and seals to prevent penetration of solids or liquids.this series is watertight when mated to give a protection index of IP68 as per IEC 6529 standard and have the following main features: - IP68 mated - Push-Pull self-latching system - Mechanical key () with multiple keys to avoid cross-mating - High packing density for space savings - 36 shielding for full EMC shielding - Compatible with existing B sockets - Same mounting hole as B sockets - Black-chrome plated brass and plastic outershell available - Multipole types 2 to contacts - For cables 1. up to 1.5 mm - Solder, crimp or print contacts Technical Characteristics Mechanical and Climatical Value Standard Endurance > 5 cycles IEC test 9a Humidity up to 95% at 6 C Temperature range -55 C, + C Resistance to vibration 1- Hz, 15 g IEC test 6d Shock resistance 1 g, 6 ms IEC test 6c Salt spray corrosion test > 1 h IEC test 11f Protection index (mated) IP68 IEC 6529 Latching retention force > 1 N Electrical Value Standard Shielding efficiency at 1 MHz > 75 db IEC Shielding efficiency at 1 GHz > 4 db IEC Material and Treatments Outershell and collet nut Latch sleeve/earthing crown Other metallic components Material Surface treatment Material Surface treatment Material Surface treatment Brass Chrome Brass/Bronze Nickel Brass Nickel Brass Black chrome Brass/Bronze Nickel Brass Nickel POM Brass/Bronze Nickel Brass Nickel Contacts Insulators Material Contact type Material Contact type Brass (UNS C 345) Male contact PEEK Crimp, solder or print Bronze (UNS C 544) Female contact Part Section Showing Internal Components Fixed socket outer shell earthing crown hexagonal nut insulator female contact o-ring locking washer Straight plug outer shell latch sleeve collet nut insulator male contact split insert carrier earthing cone gasket

3 Interconnections Metal housing models Straight plugs Fixed sockets Free sockets EGG FFG EEG Plastic housing models Straight plug Fixed socket Watertight or vacuumtight models Fixed sockets EGG HGG HEG HMG Part Numbering System Plug and free socket F G G. 1 T C L A C 4 Z Variant Alignment key Insert configuration Housing: C = Chrome plated brass K = Black Chrome plated brass B=POM Cable ø Collet type Contact: A = male solder L = female solder C = male crimp M = female crimp Insulator: PEEK L = for solder contact Y = for crimp contact..36.clac4z = Straight plug with key (G) and cable collet for bend relief, series, multipole type with 6 contacts, outer shell in chrome-plated brass, PEEK insulator, male solder contacts, C type collet for 4. mm diameter cable and nut for fitting a bend relief. Fixed socket E G G. 1 T C L L Alignment key Insert configuration Housing: C = Chrome plated brass K = Black Chrome plated brass B=POM Contact: L = female solder M = female crimp N = female print V = fem. elbow print Insulator: PEEK L = for solder contact Y = for crimp contact EGG..36.CLL = fixed socket, nut fixing, with key (G), series, multipole type with 6 contacts, outer shell in chrome-plated brass, PEEK insulator, female solder contacts. 1

4 Metal housing models Straight plug, cable collet (mm) Cable ø A L M ~M ~L TT Straight plug, cable collet and nut for fitting a bend relief (mm) Cable ø A L M ~M ~L TT FFG Straight plug, non latching, cable collet (mm) Cable ø A L M ~M ~L FFG FFG FFG FFG

EGG Fixed socket, nut fixing (mm) A E L M N B C L maxi N ø C +.1 EGG EGG EGG 12. 6. 21. 1.5 19.1 15.5 6..2 1.8 21.5.5 7.5 26.5 1.8 24.6 8.3 9.1 1.6 12.1 13.6 15.

1 1.6 12.1 ø C +.1 EEG.5 7.5 26.5 24.6 13.6 15.1 E maxi B +.1 Free socket, cable collet Dim. (mm) Cable ø A L TT 6.5. 2.4 3. ~L 9. 38. 1. 5. 12. 43.5 1.3 6.5 15. 52. 1.3 8.

5 EGG Fixed socket, nut fixing (mm) A E L M N B C L maxi N ø C +.1 EGG EGG EGG E maxi M B +.1 EGG EEG Fixed socket, nut fixing, back panel mounting (mm) A E L N B C L maxi N EEG EEG ø C +.1 EEG E maxi B +.1 Free socket, cable collet Dim. (mm) Cable ø A L TT ~L Free socket, cable collet and nut for fitting a bend relief Dim. (mm) Cable ø A L TT ~L

Plastic housing models Straight plug, cable collet and nut for fitting a bend relief, POM outer shell (mm) Cable ø A L M ~M ~L 9.7 38.5 28.5 13. 45. 34. 1. 5. 1.3 6.

6 Plastic housing models Straight plug, cable collet and nut for fitting a bend relief, POM outer shell (mm) Cable ø A L M ~M ~L EGG Fixed socket, nut fixing, POM outer shell (mm) A E L M N B C L maxi N ø C +.1 EGG EGG E maxi M B +.1 Watertight or vacuumtight models HGG Fixed socket, nut fixing, watertight or vacuumtight (mm) A E L M N B C L maxi N HGG ø C +.1 HGG HGG E maxi M B +.1 Note: temperature range - C / +1 C 4

7 HEG Fixed socket, nut fixing, watertight or vacuumtight, back panel mounting (mm) A E L N B C L maxi N HEG HEG E maxi ø C +.1 B +.1 HEG Note: temperature range - C / +1 C HMG Fixed socket, nut fixing, watertight or vacuumtight, back panel mounting (mm) A E L N B C L maxi N HMG HMG E maxi ø C +.1 B +.1 HMG Note: temperature range - C / +1 C Alignment Key Key Contact type Plug Socket G B G male female A J A male female B male female J female male 5

8 Insert configurations Multipole Contact type Solder contacts AWG Test voltage (kv rms) Test voltage (kv dc) TT TT Print (straight) 2 Rated current (A).95 TT Crimp contacts Print (elbow) 1. Crimp 28 Solder Contact ø (mm) 3 Solder () Crimp

9 Multipole Contact type AWG x1.3 1x Crimp Solder ().7 Print (elbow).8 Print (straight) Test voltage (kv dc) Solder 7 Test voltage (kv rms) Contact ø (mm) Crimp contacts Crimp Rated current (A) Solder contacts

10 Multipole Contact type Solder contacts AWG Test voltage (kv dc) Rated current (A) Crimp 314 Solder () Print (elbow).5 14 Print (straight) Crimp contacts 2. Solder 1. Contact ø (mm).8 Test voltage (kv rms) Crimp

11 Multipole Solder contacts Contact type AWG Crimp Crimp contacts Contact ø (mm) Solder Crimp Print (straight) Print (elbow) Solder () Test voltage (kv rms) Test voltage (kv dc) Rated current (A)

12 Collets Type Cable ø (mm) Type Cable ø (mm) Type Cable ø (mm) Type Cable ø (mm) TT C27 C C15 C C15 C C3 C C1 C C25 C C25 C C4 C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C

Accessories Bend relief L Part number Bend relief Cable ø A L Part number Bend relief Cable ø A L GMA..12.DG 1.2 1.1 1.4 GMA.2B.4.DG 4. 36 4. 4.5 GMA...DG 1.8 1.8 2.1 GMA.2B.45.DG 4.5 36 4.5 5. GMA..25.

13 Accessories Bend relief L Part number Bend relief Cable ø A L Part number Bend relief Cable ø A L GMA..12.DG GMA.2B.4.DG GMA...DG GMA.2B.45.DG GMA..25.DG GMA..28.DG GMA...DG TT GMA.2B.5.DG GMA.2B.6.DG GMA.2B.7.DG GMD..25.DG GMA.2B.8.DG GMD..28.DG GMA.3B.5.DG GMD...DG GMA.3B.6.DG GMA.B.25.DG GMA.3B.7.DG GMA.B.3.DG GMA.3B.8.DG GMA.B.35.DG GMA.3B.9.DG GMA.B.4.DG GMA.B.45.DG Note: all dimensions are in millimetres. GMA.1B.25.DG GMA.1B.3.DG GMA.1B.35.DG GMA.1B.4.DG GMA.1B.45.DG GMA.1B.54.DG GMA.1B.65.DG Ref. Colour Ref. Colour Ref. Colour A blue J yellow R red B G white grey M N brown black S V orange green Note: the last letter «G» of the part number indicates the grey colour of the bend relief. For ordering a bend relief with another colour, see table above and replace the letter «G» by the letter of the required colour. 11

14 PCB drilling pattern Fixed socket with straight print contact 32 A B A B C A B C A B C A B C 36 A B C A B C 38 A B C A B C A B C D H A B C D H D ø H A B C D H Note: all views are from the side of the socket. 12

15 ø.6 ø A B C H I 316 D A B D H H ø H I D E A B D E H D E A B C D E H ø H ø H D E ø H A B C D E H ø.6 D ø H B C D H D E ø H ø 8.8 C D E H D ø H B C D E H ø.6 ø.6 ø E ' ø 1.6 ø 4.2 ø ' ø 2.1 ø 5.6 ø 9 9 3' ' 2.2 ø 5.7 ø ø ø 7 ø.6 ø ' Note: all views are from the side of the socket. 13

16 Tooling For crimp contact tooling see B series in the unipole/multipole catalogue. Cable assembly ø contact (mm) Cable stripping lengths (mm) Solder Crimp L S T L S T 32/33/34 TT / /35 36/37/ / L 34/35 36/37/ T 31/314/ S /35/36/37 38/ /314/316/3/ / / /36/ / /314/316/ /3/4/6/

17 Notes: 15

18 Notes: 16

19 Product safety notice PLEASE READ AND FOLLOW ALL INSTUCTIONS CAREFULLY AND CONSULT ALL RELEVENT NATIONAL AND INTERNATIONAL SAFETY REGULATIONS FOR YOUR APPLICATION. IMPROPER HANDLING, CABLE ASSEMBLY, OR WRONG USE OF CONNECTORS CAN RESULT IN HAZARDOUS SITUATIONS. 1. SHOCK AND FIRE HAZARD Incorrect wiring, the use of damaged components, presence of foreign objects (such as metal debris), and / or residue (such as cleaning fluids), can result in short circuits, overheating, and / or risk of electric shock. Mated components should never be disconnected while live as this may result in an exposed electric arc and local overheating, resulting in possible damage to components. 2. HANDLING Connectors and their components should be visually inspected for damage prior to installation and assembly. Suspect components should be rejected or returned to the factory for verification. Connector assembly and installation should only be carried out by properly trained personnel. Proper tools must be used during installation and / or assembly in order to obtain safe and reliable performance. 3. USE Connectors with exposed contacts should never be live (or on the current supply side of a circuit). Under general conditions voltages above 3 VAC and 42 VDC are considered hazardous and proper measures should be taken to eliminate all risk of transmission of such voltages to any exposed metal part of the connector. 4. TEST AND OPERATING VOLTAGES The maximum admissible operating voltage depends upon the national or international standards in force for the application in question. Air and creepage distances impact the operating voltage; reference values are indicated in the catalog however these may be influenced by PC board design and / or wiring harnesses. The test voltage indicated in the catalog is 75% of the mean breakdown voltage; the test is applied at 5 V/s and the test duration is 1 minute. 5. CE MARKING CE marking means that the appliance or equipment bearing it complies with the protection requirements of one or several European safety directives. CE marking applies to complete products or equipment, but not to electromechanical components, such as connectors. 6. PRODUCT IMPROVEMENTS The LEMO Group reserves the right to modify and improve to our products or specifications without providing prior notification. Data subject to change No reproduction or use without express permission of editorial or pictorial content, in any manner. LEMO reserve the right at all times to modify and improve specifications without any notification. 17

LEMO HEADQUARTERS SWITZERLAND LEMO SA Chemin des Champs-Courbes 28 - P.O. Box 194 - CH-124 Ecublens Tel. (+41 21) 695 16 - Fax (+41 21) 695 16 2 - e-mail: info@lemo.

20 LEMO HEADQUARTERS SWITZERLAND LEMO SA Chemin des Champs-Courbes 28 - P.O. Box CH-124 Ecublens Tel. (+41 21) Fax (+41 21) info@lemo.com LEMO SUBSIDIARIES AUSTRIA LEMO Elektronik GesmbH Lemböckgasse 49/E Wien Tel: (+43 1) Fax:(+43 1) sales@lemo.at CANADA LEMO Canada Inc 44 East Beaver Creek Road, unit Richmond Hill, Ontario L4B 1G8 Tel: (+1 95) Fax: (+1 95) info-canada@lemo.com CHINA / HONG KONG LEMO Electronics (Shanghai) Co., Ltd 5th Floor, Block 6, City of ELITE, 1 Jinhai Road, Pudong Shanghai, China 16 Tel: (+86 21) Fax: (+86 21) cn.sales@lemo.com DENMARK LEMO Denmark A/S Gammel Mosevej Gentofte Tel: (+45) Fax: (+45) info-dk@lemo.com FRANCE LEMO France Sàrl 24/28 Avenue Graham Bell Bâtiment Balthus 4 Bussy Saint Georges 7767 Marne la Vallée Cedex 3 Tel: (+33 1) Fax: (+33 1) info-fr@lemo.com GERMANY LEMO Elektronik GmbH Hanns-Schwindt-Str München Tel: (+49 89) Fax: (+49 89) info@lemo.de HUNGARY REDEL Elektronika Kft Nagysándor József u Budapest Tel: (+36 1) Fax: (+36 1) info-hu@lemo.com ITALY LEMO Italia srl Viale Lunigiana Milano Tel: (+39 2) Fax: (+39 2) sales.it@lemo.com JAPAN LEMO Japan Ltd 2-7-, Mita, Minato-ku, Tokyo, Tel: (+81 3) Fax: (+81 3) lemoinfo@lemo.co.jp LEMO DISTRIBUTORS AUSTRALIA, BRAZIL, CHILE, CZECH REPUBLIC, GREECE, INDIA, ISRAEL, NEW ZEALAND, PAKISTAN, POLAND, RUSSIA, SOUTH AFRICA, SOUTH KOREA, TAIWAN, TURKEY, UKRAINE NETHERLANDS / BELGIUM LEMO Connectors Benelux De Trompet DA Heemskerk Tel. (+31) Fax (+31) info@lemo.nl NORWAY / ICELAND LEMO Norway A/S Stanseveien 6B 975 Oslo Tel: (+47) Fax: (+47) info-no@lemo.com SINGAPORE LEMO Asia Pte Ltd 4 Leng Kee Road, #6-9 SiS Building Singapore Tel: (+65) Fax: (+65) sg.sales@lemo.com SPAIN / PORTUGAL IBERLEMO SAU Brasil, 45, 842 Granollers Barcelona Tel: (+34 93) Fax: (+34 93) info-es@lemo.com SWEDEN / FINLAND LEMO Nordic AB Mariehällsvägen 39A Bromma Tel: (+46 8) Fax: (+46 8) info-se@lemo.com SWITZERLAND LEMO Verkauf AG Grundstrasse B 6343 Rotkreuz Tel: (+41 41) Fax: (+41 41) ch.sales@lemo.com UNITED KINGDOM LEMO UK Ltd 12- North Street Worthing, West Sussex, BN11 1DU Tel: ( ) Fax: ( ) lemouk@lemo.com USA LEMO USA Inc P.O. Box 248 Rohnert Park, CA Tel: (+1 77) (+1 8) Fax:(+1 77) info@lemousa.com CAT.MT.LEN.P115, updated February 15 U.S. Air Force photo/tech. Sgt. Shane A.

S Series ERA EBC ERN ERD ERC ECP EHP FFE EBD FFA, FFP HGP ERN FFL HCP

S Series ERA EBC ERN ERD ERC ECP EHP FFE EBD FFA, FFP HGP ERN FFL HCP S Series S series connectors have main features as follows: security of the Push-Pull self-latching system coaxial, triaxial and mixed contact configurations solder contacts, print contacts only for coaxial