Anderberg / Cupples Hinges
|
|
- Emory Terry
- 6 years ago
- Views:
Transcription
1 Please send a sample for accurate identification nderberg / Cupples Hinges 34 Series nderberg 4 Bar Friction rm ssembly There are more than 300 variations of the 4-Bar Hinge. Variations include the overall length, width and thickness of track, overall stack height of the track and arms combined plus materials of aluminum, steel and stainless steel. Over the years, many special types of 4-Bar Hinges were manufactured that incorporated an offset top arm, had shims attached to the top arm and had shims or thick solid extruded sections as part of or subsequently added to the track. Many of these special types are now obsolete and the original supplies are now exhausted. However, we carry more than 30 standard shims. We can also custom manufacture shims and spacers to work with current stock 4-Bar Hinges to adapt them to replace obsolete models. Our hinges are non-handed and will work for both left and right side. These hinges are sold each. PESE SEND IN YOUR COMPETE SMPE HINGE ONG WITH NY SHIMS OR SPCERS BEING USED FOR PROPER IDENTIFICTION. We will provide you with a quote for our recommended stock hinge plus any additional recommended shims or spacers necessary for adaptation. Used On Cupples Windows Blaine Part Number / 4-3/ 7-3/ 7-3/ B 5-9/32" 6-13/32" 7-25/32" 11-9/32" C 4" 4" 7" 7" C B G5-108
2 Please send a sample for accurate identification HEVY DUTY 4-BR HINGES nderberg 301 Series 4-Bar Hinges Stainless () - () - () 3/4" & Stainless 5/64" 5/64" Offset between & nchor Hole only nchor Hole to 24" nchor Hole 12" to 24" 4-7/ B 2-9/ 13/32" Closed Position 7/ 7/ 3/ 29/64" 57/64" 7/32" 29/32" F E D G Countersunk hole on no-stop tracks ( - 24") Mat'l Size Part Number Stop No Stop 109 oose Rivets Track Track & Rivets Reinforced Support rm Hinges Only.218 Track Track Track If your hinge specifications do not appear on this page, or if you are unsure about the part you need, please send a sample to our Research Department for accurate identification. G5-109
3 UMINUM 4-BR HINGES nderberg 77 Series 4-Bar Hinges Stackable Height G5-110
4 Please send a sample for accurate identification 4-Bar Hinges UMINUM 4-BR HINGES nderberg 601 Series - 90 Degrees 3/4" Center line of 1-13/32".073 (1.9mm) Offset Between & 13/64" Closed position 29/64" 57/64" 3/8" E D G 1-7/ Truth / Blaine Part No. Hinge ength () "" "D" "E" "G" " 8-13/32" 4-3/ 6" " 7-29/32" 6-11/ " 8-15/ 8-15/ 5-7/ UMINUM 4-BR HINGES nderberg 401 Series - 90 Degrees Offset Between & 7/ 1-5/ 11/64" COSED POSITION 23/64" 45/64" 1/4" E D G Truth / Blaine Part No. Hinge ength () "" "D" "E" "G" " 6-3/4" 7-15/32" 3-5/ 5-15/ *Black cetal (plastic) Shoe * " 6-3/4" 7-9/32" 8-15/ 8-5/32" 1-27/32" /32" 6-3/ /32" 8-25/32" 6" 6-21/32" / 9-3/8" 7-13/32" 7-1/8" G5-111
5 4-Bar Hinges 755 Stainless Storm Hinges w/ symmetric End Cap Tested to M standard Superior Structural Wind oad Capability ll 300 Series Stainless Sold in pairs Inline (stacked) Mounting Offset (stacked) Mounting Slide Mechanism incorporates a concealed non-structural delrin sleeve for smoothness of operation and application of friction Inline Mounting For Projected (wning Style) Windows Part No. Hinge Sz 1/8" dded Max. Sash Ht. Max. Sash Wt. Max. Opening Inline Mounting For Casement Windows out out out out Part No. Hinge Sz 1/8" dded Max. Sash Ht. Max. Sash Wt. Max. Opening out out lbs lbs Offset Mounting For Projected (wning Style) Windows Part No. Hinge Sz 1/8" dded Max. Sash Ht. Max. Sash Wt. Max. Opening out out out out Offset Mounting For Casement Windows Part No. Hinge Sz 1/8" dded Max. Sash Ht. Max. Sash Wt. Max. Opening out out lbs lbs G5-112
6 7/ Please send a sample for accurate identification TRUTH WNING HINGES Sold in pairs wning / Casement Hinges 7/ 23/32" Mounting Holes Equally Spaced On 4" Centers Closed Position 4-3/8" Bottom Hole Only 7/ Blaine Part Number Truth Part Number Sash Height Max. Sash Wt. ength "" Material /R /R /R /R /R /R /R /R /R & & & & & & & & & " 14-19" " 26-34" 34-42" 7 B 7 B 20 B 20 B 38 B 38 B 50 B 50 B 61 B Stainless Stainless Stainless Stainless TRUTH CSEMENT HINGES Sold in pairs 7/ 2-23/32" 9-1/4" 5-1/4" 1/4" Only on 14-17, & Blaine Part Number Truth Part Number ength "" Material & & & 006 Stainless G5-113
7 V1 Please send a sample V2 V3 Hinges / Vent rms 691 1" Must Send Sample or Request a Worksheet From Must Send Sample or Request a Worksheet From Must Send Sample or Request a Worksheet From *Must send sample or request a worksheet from * Specify or Specify or Specify or 3/8" Pella 3070 Top & Bottom Hinges Pella BWH # Description Glass Size R R R R R R " wide 12" wide wide wide 20" wide 20" wide 24" wide 24" wide 28" wide 28" wide wide wide Right or left hand determined from inside based on the side the latch is on. G5-116
37/99 SASH CONTROL DEVICES
FRICTION DJUSTORS: Friction djustors are used either as a limit device or for additional friction in conjunction with certain types of hinging on projected windows. By tightening a screw in the sliding
More informationTruth Hardware (Awning Window)
Truth Hardware (Awning Window) 20-1/2" Single Pull Lever Operator Contents: 1 operator; 1 hook and 1 set of installation screws. "Y" Dimension "Y" Finish Part No. Under 2" TH-23070 Over 2" TH-23069 Under
More informationCASEMENT WINDOW SYSTEMS
ENCORE DUA ARM OPERATOR All the strength and performance characteristics of Maxim, but with the flexibility of a snap fit cover and streamlined full-flip folding handle. 33% less effort to operate than
More informationPARALLEL STAY. Parallel Opening Hinge for Commercial Applications
PARALLEL STAY Parallel Opening Hinge for Commercial Applications Cotswold parallel hinges provide natural ventilation whilst maintaining aesthetically pleasing sightlines for modern façade design. Parallel
More informationPARALLEL STAY. Parallel Opening Hinge for Commercial Applications
PARALLEL STAY Parallel Opening Hinge for Commercial Applications Cotswold parallel hinges provide natural ventilation whilst maintaining aesthetically pleasing sightlines for modern façade design. Parallel
More information400 Series Profile Rail Linear Guides
400 Series Profile inear uides Transport grade ball profile rail system www.thomsonlinear.com EECTROMTE Features and enefits The 400 Series Profile inear uide is the newest addition to the Thomson inear
More informationAbout.
TM About Harris Hardware was founded in 1909 in Brooklyn, NY. During our long history, we have been a leading supplier of hardware to various specialty markets. Since 1980 Harris has manufactured custom
More informationEOAT Design and Build Service
2: EOAT Design and Build Service From the simplest to the most complex EOAT, EMI specializes in designing and building customized End-of-Arm-Tooling Priced Competitively. Get started by sending us a sample
More information81870 Alside_24667 Alside 11/3/16 5:01 PM Page 2 80 Series
80 Series Alpine s 80 Series is the ultimate in vinyl window technology. Our heavy-duty vinyl frames combined with 1" insulated, Low-E glass, make these windows some of the most energy-efficient produced.
More information9140 SERIES FEATURES SINGLE DOOR, SURFACE MOUNT (PUSH) OFFSET PIVOT/BUTT HINGE
SINGLE, SURFACE MOUNT (PUSH) OFFSET PIVOT/BUTT HINGE 9140 SERIES The 9140 BENCHMARK by LCN is an electrically powered low-energy operator. It provides easy access for people with disabilities, or the elderly.
More informationJINDAL SECTION NUMBERS FOR CASEMENT WINDOW 20510, 20941, 20510, 20941, , 19360, 19361, 19366, 19370, 19377, 19382,
CSEMENT WINDOW a a i i j j i i n n d d s s h h casement windows (Hinged Type) are simple in design. They are mostly used in residential applications. the windows gave hinged panels which open either on
More informationAmbassador ALUMINUM WINDOWS & DOORS FOR ALL SEASONS
Ambassador ALUMINUM WINDOWS & DOORS FOR ALL SEASONS THE REVOLUTION IS HERE. I N T E R N AT I O N A L W I N D O W CO R P O R AT I O N About Ambassador The name says it all. Representing International Window
More informationLCN 9140 SERIES FEATURES SINGLE DOOR, SURFACE MOUNT (PUSH) OFFSET PIVOT/BUTT HINGE
SINGLE, SURFACE MOUNT (PUSH) OFFSET PIVOT/BUTT HINGE The 9140 BENCHMARK by LCN is an electrically powered low-energy operator. It provides easy access for people with disabilities, the elderly or the frail.
More informationFrENcH casement windows D11.15 HINGES
D11 French casement windows HINGES 01.02.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Hinges Contents 1. General....03
More informationBILT INDUSTRIES, INC.
BILT INDUSTRIES, INC. What you appreciated as Frick-Gallagher is now BILT. BILT with powder coating. QUICK-BILT KLIP-BILT SPEEDI-BILT National Sales Office 801 W. Markey Road Belton, Missouri 64012 Phone:
More informationF11.13 FRICTION HINGES F11 PROJECT-OUT WINDOWS AND TOP HUNG WINDOWS
F11 AND TOP HUNG WINDOWS F11.13 01.06.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General information...f11.13.03
More informationTHE ENCLOSURE HARDWARE SUPPLIER
FABTECH SUPPLY THE ENCLOSURE HARDWARE SUPPLIER Our Products JIC Style Enclosures JIC Style Cover Clamp Bracket... 5 JIC Style Cover Clamp... 6 JIC Style Cover Clamp Assembly... 6 JIC Cover Clamp Screws...
More informationSIZE TABLES In-Swing Doors and Sidelights
In-Swing Doors and Sidelights (311) (292) (362) (343) (413) (394) (851) (953) (1 124) (1 105) (1 718) (1 699) (1 924) (1 902) (2 226) (2 207) 1' 0 11 2 1' 2 1' 1 1 / 1' 4 1' 3 2' 10 2' 9 3' 1 3' 8 3' 7
More informationDrive pinion and ring gear, adjusting
Page 1 of 8 39-33 Drive pinion and ring gear, adjusting Note: Careful adjustment of the drive pinion and ring gear is important for the service life and smooth running of the final drive. For this reason,
More informationSeries 2, 3, 4, & 5 Aluminum - Accessories
Wedge Lock Splice Plates Standard 4-hole pattern. Furnished in pairs, with hardware. One pair including hardware provided with each section. Boxed in pairs with hardware. For field installation drill 13
More informationDESIGN DATA - CURVED SHAPES Wood and Aluminum-Clad Exteriors
DESIGN DT - CURVED SHPES Wood and luminum-clad Exteriors Curved Shapes - Frame cannot exceed 96" in both directions. For units with colored glazing (bronze, gray or green), frame cannot exceed 11' 0-3/4"
More informationSupport Equipment. In This Section Mobile Ingredient Bins H Kettle Drainer H Rack/Tray Carts H
H SUPPORT EQUIPMENT Support Equipment In This Section Mobile Ingredient Bins H-1...198 Kettle Drainer H-2...199 Rack/Tray Carts H-3...200 Tray, Cup or Glass Rack Carts H-3-B...201 Cup & Glass Rack Carts
More informationSeries 2, 3, 4, & 5 Aluminum - Accessories
The following is a list of accessories and fittings that can be provided with S8 tray. For more information on these items, contact our Engineering Department. Fittings Horizontal Bends 30 Bends with 24,
More informationArte. Possibilities. Architecture for the future. Endless. Standard Profiles Nunc Et Orci Morbi Posuere. Arte Profiles Options. Arte Window Options
Possibilities Arte Endless Architecture for the future Standard Profiles Nunc Et Orci Morbi Posuere Arte Profiles Options Page 4 Arte Window Options Arte Door Options Page 13 Page 25 Table of Contents...
More informationPRICE LIST. Table of Contents
PRICE LIST Table of Contents 3600 Concealed Vertical Rod... 2-3 3700 Rim Latching... 3-4 Electrical Latching Kits... 4 Power Supplies... 4 Power Transfers... 4 Exit Device Accessories... 5 Inactive Devices...
More informationK17.13 DOOR STAYS K17 DOORS
K17 DOORS K17.13 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Door stays n 684(C)-500...K17.13.03 1.1.
More informationContent. Door closer. Overview General information door closer 81 Allocation of sash width to dimension of door closer 82 Adjustment options 82
Content Overview General information door closer 81 Allocation of sash width to dimension of door closer 82 Adjustment options 82 Slide rail door closer for single-sash doors 83 Slide rail door closer
More informationPrimed Casement Windows (1932 to 1989)
Primed Casement Windows (1932 to 1989) Parts Catalog Main Menu Section TOC Search What s in This Section Standard and Picture Windows...................................... Page 3 Parts Illustration...........................................................
More informationPrimed Casement Windows (1932 to 1989)
Primed Casement Windows (1932 to 1989) Parts Catalog Main Menu Section TOC Search What s in This Section Standard and Picture Windows...................................... Page 3 Parts Illustration...........................................................
More informationstyle vision & miscellaneous miscellaneous section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
miscellaneous vision & style miscellaneous INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 311 miscellaneous No. 16377 No. 16858 Carb
More information[ ] ] [ 6a2O s6 Height B PW CABLE TRAY PW CABLE TRAY
PW CBE RY PW CBE RY Covers protect and contain cables. hey are highly recommended ray Covers to avoid damage to the tray contents and to protect against the elements. Some covers can also be attached to
More informationPV STYLE LEAD SCREW NUTS
PV STYE E SCREW NUTS For Use With PS Series ead Screws NUT SPECIFICTIONS Material: Polyacetal with lubricating additive Tensile Strength: 9,700 PSI at 73 O F Shear Strength: 9,500 PSI at 73 O F SYSTEM
More information9530 Series Senior Swing. Features. Special Templates. Fasteners Mounting. Certifications
Features The 9530 SENIOR SWING by LCN is an ADA door operator that is a two-in-one swing door operator. SENIOR SWING operators when activated, opens doors automatically for wheelchair access, yet allows
More informationALL NEW SLIDE OUT TRUCK BED BOXES PG 16 XD ALUMINUM UNDERBODIES PG Truck Bed Boxes. XD Steel. Underbodies.
ALL NEW SLIDE OUT TRUCK BED BOXES PG 16 XD ALUMINUM UNDERBODIES PG 13 2017-2018 Truck Bed Boxes XD Steel Underbodies XD Aluminum Underbodies Black Aluminum Diamond Tread Our History 1946 Buyers Products
More informationSENIOR SWING UNIQUE FEATURES
SENIOR UNIQUE FEATURES Digital Control Suite Provides exceptionally precise control of a large range of built-in functions combined with superior durability and performance. Visual indications and digital
More informationDESIGNER SERIES HINGED GLASS PANEL, GRILLE, BLIND AND SHADE INSTRUCTIONS
2016 Pella Corporation Part Number: 80ML0106 INSTRUCTION INSTRUCCIONES DE INSTALACIÓN DESIGNER SERIES HINGED GLASS PANEL, GRILLE, BLIND AND SHADE INSTRUCTIONS CAUTION: DO NOT remove or cut the white cord
More informationRestrictors & Security Devices. Hardware By Professionals For Professionals
Restrictors & Security Devices Hardware By Professionals For Professionals 102 103 Restrictors & Security Devices Contents RRestrictors & Security Devices Selection Mila stock a comprehensive range of
More information15 ELLIPSE SINGLE ARM OPERATOR CASEMENT
CASEMENT 5 ELLIPSE Made of the highest quality materials, the Ellipse Single Arm Casement Operator has provided years of continuous and trouble-free service for our customers. This operator will provide
More information400 Series Profile Rail Linear Guides. Transport grade ball profile rail system
400 Series Profile inear uides Transport grade ball profile rail system w w w. t h o m s o n l i n e a r. c o m Features and enefits The 400 Series Profile inear uide is the newest addition to the inear
More information1000 Series surface mounted closers
1000 surface mounted closers PPLICTIONS n For aluminum, hollow metal, or wood swinging doors and frames. n Can be used with hinge or pivot mounted door. n Mounts on 1-3/4 transom without adapter plates.
More informationBODY COMPONENTS SECTION H. Fender Backs. Metal Slat. Fender Brackets. Roof Vent. Ramps & Rails. Replacement Dome. Ramp Assist Spring
OY OMPONNTS Metal Slat Roof Vent Fender acks Fender rackets ubs & xles Replacement ome Single xle Fenders Tandem xle, Straight Style Fenders Tandem Fender, Tear rop Style Square end Fenders Triple xle
More informationSTANDARD SERIES COMMERCIAL DOOR REINFORCERS
COMMERCIAL DOOR REINFORCERS STANDARD SERIES COMMERCIAL DOOR REINFORCERS 1, 2, 3, 4 FOR STANDARD DOOR LOCKS 2 1 8" bore Overall Size Back Set Door Thickness 1-AB... Antique Brass... 4" x 9"... 2 3 8"...
More information6100 SERIES SINGLE HUNG
STORMSTRONG IMPACT RESISTANT 6100 SERIES SINGLE HUNG 1. 8 0 0. 3 2 7. 3 0 8 6 w w w. C W S. c c STORMSTRONG Impact Resistant Single Hung Windows Storm Strong 6100 Series Single Hung 1-1/2 pre-punched Nail
More information1/2" CHANNEL BALANCE
Support Systems 61 Series Balance with Hemmed Edge 1/2" CHANNEL BALANCE Ordering Information 1) Measure metal channel length (do not include plastic ends). 2) Check number stamped on channel (e.g. 20-2,
More informationCover. Finishes/Colors/ Powder Coat FINISH PLASTIC METAL
1450 Features The 1450 cast aluminum closer was specially designed to deliver consistent, dependable, long-term performance in frequently-used, low-abusive traffic areas. The patented design, featuring
More informationLCN 9130 SERIES FEATURES SINGLE DOOR, SURFACE MOUNT (PULL) OFFSET PIVOT/BUTT HINGE
SINGLE, SURFACE MOUNT (PULL) OFFSET PIVOT/BUTT HINGE The 9130 BENCHMARK by LCN is an electrically powered low-energy operator. It provides easy access for people with disabilities, the elderly or the frail.
More informationSpring Steel Fasteners
Cable Hooks Spring Steel Fasteners Supports all category 5/5e/6, fiber optic, innerduct and low voltage cabling requirements Finish is Pre-Galvanized Steel Exclusive Qwik-Latch cable retainers provide
More informationPage 1 of 12 DZ /15/13
Page 1 of 12 Dee Zee Ford Super Duty luminum Flow Through Tailgate Installation Instructions Congratulations on your purchase of a quality Dee Zee product. Dee Zee is recognized as having the highest quality
More informationSRD Design CORPORATION. Fenestration Specialists!
SRD Design CORPORATION Fenestration Specialists! Series 5000 By Champion Window & Door Syosset, New York Design by: SRD Design 2002 SRD Design CORPORATION ENGINEERING ENGINEERING SPECIALISTS DIVERSITY
More information400 Series Profile Rail Linear Guides
400 Series Profile inear uides Transport grade ball profile rail system Features and enefits The 400 Series Profile inear uide is the newest addition to the inear uide product line. The 400 Series is a
More informationDESIGNER HINGED PATIO DOOR
DESIGNER HINGED PATIO DOOR Designer Hinged Patio Doors are swinging patio door systems available in 2 or 3-lite units and constructed of the same solid quality Signet and Heritage Fiberglass, and Legacy
More informationVista Series Vinyl Windows & Doors
Vista Series Vinyl Windows & Doors Options maximize COmFORt, beauty & StyLE Vista PLUS vs. Vista Windows SEE the DIFFERENCE & ChOOSE with CONFIDENCE LE3 STC SPL CC LowE3 performance glass with Argon gas
More informationSeries 1 Steel - Accessories
- ccessories Standard (L-Shaped) Splice Plates One pair including hardware provided with each section. Prepackaged in pairs in a plastic bag, with hardware. 4-hole pattern L-shaped splice plates. L-shaped
More informationVINYL WINDOWS & DOORS
VINYL WINDOWS & DOORS By FLEETWOOD FLEETWOOD FleetwoodUSA.com HIGH-PERFORMANCE VINYL WINDOWS Energy Efficient Means Smaller Energy Bills Because vinyl windows and doors keep cold air out in winter and
More informationWindow Locking 10YEAR. whitco.com.au
Window Locking 10YEAR whitco.com.au Contents CYL4 Push Lock CYL4 Mini Push Lock CYL4 Multi Bolt CYL4 Patio Bolt page 4 page 6 page 7 page 8 CYL4 Window Bolt CYL4 Mini Window Bolt Keyed Sash Lock Safety
More informationROTON CONTINUOUS GEARED HINGES TABLE OF CONTENTS. L Length Specifications B Bearing at Top...4 Bearing on Top...4 Bearing Replacement Kit...
TABLE OF CONTENTS B Bearing at Top...4 Bearing on Top...4 Bearing Replacement Kit... 10 C Center Punches... 10 Concealed Electric Monitoring... 5, 7 Concealed Electric Through-Wire... 5, 7 Concealed Electric
More informationHinges. Various hinges. Stainless steel hinge with removable pin. Removable pin hinges with nylon washers. Removable pin.
Stainless steel hinge with removable pin Removable pin. Part number Material Finish Weight (g) 52-1-3877 304 stainless steel gloss 60 94.5 1.5 4 50 ø 6 ø 5 20 42 10 45 () 74.5 5.5 Removable pin hinges
More informationIn This Section Portable Hot Box Aluminum For Transport J ER-18 Enclosed Rack For Display J
J Cabinets In This Section Portable Hot Box J-1...237 ER-18 Enclosed Rack For Display J-2...239 Econoline Cabinets Aluminum For Storage J-3...241 Transport Cabinets J-4...243 Stackable Cabinets J-5...245
More information9560 Series Senior Swing. Features. Special Templates. Cover Fasteners Mounting. Certifications
Senior Features The 9560 SENIOR SWING by LCN is an ADA door operator that is a two-in-one swing door operator. SENIOR SWING operators when activated, opens doors automatically for wheelchair access, yet
More informationALUMINUM UTILITY TRAILERS
ALUMINUM UTILITY TRAILERS BUILT FOR ADVENTURE. UTILITY TRAILERS page The Triton Difference page AUT Series page 8 AUX Series page 0 TILT Series page ATV Series page ATV-90-TR Series page GU Series page
More information9550 Series Senior Swing. Features. Special Templates. Certifications. Fasteners Mounting
Senior Features The 9550 SENIOR SWING by LCN is an ADA door operator that is a two-in-one swing door operator. SENIOR SWING operators when activated, opens doors automatically for wheelchair access, yet
More information300 SERIES STANDARD DUTY CURVED TRACK
300 SERIES STANDARD DUTY CURVED TRACK COMPLETE TRACK MODEL NUMBERS 301A 301W 316A 316W 328A 328W 300B SERIES BLACK CURVED TRACK COMPLETE TRACK MODEL NUMBERS 301AB 301WB 316AB 316WB 328AB 328WB SINGLE CARRIER
More information400 Series Profile Rail Linear Guides. Transport grade ball profile rail system бесплатные звонки по РФ
400 Series Profile Rail inear uides Transport grade ball profile rail system w w w. t h o m s o n l i n e a r. c o m Features and enefits The 400 Series Profile Rail inear uide is the newest addition to
More informationVisions 3000 Series 924 Parts Catalog
3000 Series Visions 3000 Series 924 Parts Catalog #1218583 FOR PRODUCT PRODUCED AFTER 4/07 Casement Casement Awning awning French Casement french casement Visions Windows and Doors 880 South View Drive
More informationPage 1 Monumental Blank Entrances Applied Hardware & Preps, Tubelite Standard Hardware
Page 1 Monumental Blank Entrances Applied Hardware & Preps, Tubelite Standard Hardware Butt Hinges Pivots Pull Handles/Push Bars Heavy Duty P094 Mortised Butt Hinge P094MD P094MF (includes P2093 $ 123
More informationPart # GM G Body Tru-Turn Suspension Package
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11329599 78-88 GM G Body Tru-Turn Suspension Package Front Components: 1 11323699 Upper Strong Arms 1
More informationSeries 2, 3, 4, & 5 Steel - Accessories
- ccessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. Boxed in pairs Expansion Splice Plates Expansion plates allow
More informationTri-Clover Manual and Air Actuated Fractional Valves
FVSM-99 Tri-Clover Manual and Air Actuated Fractional Valves Series 650 655 660 CONTENTS Thank you for purchasing a Tri-Clover Product! This manual contains disassembly and assembly instructions, maintenance
More informationSeries 3 & 4 Stainless Steel - Accessories
Splice Plates Standard 8-hole pattern for all stainless steel splice plates. One pair including hardware provided with straight section. Boxed in pairs with hardware. Expansion Splice Plates Expansion
More information2300/2320. MORTISE LOCKS AND HANDLESET ACCESSORIES (Keepers, Spacers, Adapters and Bumpers)
HANDLES & LOCKSETS MORTISE LOCK APPLICATIONS 2300/2320 Truth Hardware realizes that each profile in the marketplace may require its own particular hardware component due to the variety of mounting applications
More informationHinges and Flap Fittings Furniture Hinges
Butt hinge Material: Steel Length: 50 mm Flange thickness: 1.5 mm Barrel Ø: 8 mm Crank A, straight Ø Gap1 mm Mounting Nickel plated matt Left 1.08.717 Right 1.08.708 Brass plated Left 1.08.511 Right 1.08.502
More informationHinges. Truckline Inc. Call Us at Tel: HINGES 8-1. Truck & Trailer Body Parts Mfg. & Sales
` Hinges Aluminum Hinges Stainless Steel Hinges Galvanized Steel Hinges HINGES 8-1 DOOR Hinges TL-Hinge-22-00407 TL-Hinge-22-01047 TL-Hinge-22-01036 TL-Hinge-22-01046 TL-Hinge-22-01041 TL-Hinge-22-01043
More informationPella Impervia 350 Series Vinyl Awning Windows and Sliding Patio Doors
Pella Impervia 350 Series Vinyl Awning Windows and Sliding Patio Doors Pella 350 Series premium vinyl windows and patio doors are available in a variety of frame types to help ensure a smooth installation
More informationYukon Trail Inc PARTS MANUAL. ELECTRIC 4x4 HUNTING VEHICLE
Yukon Trail Inc PARTS MANUAL ELECTRIC 4x4 HUNTING VEHICLE CONTENT Part 1 Body 1-1 Front Cover 2 1-2 Instrument Board 3-4 1-3 Rear Cover 5-6 1-4 Rear Bumper 7 1-5 Windshield 8 1-6 Front Basket 9 1-7 Brush
More informationAIR WINCH MODEL K5U & K5UL. Warning! Review WINCH OPERATING PRACTICES Prior to use.
Instructions, Parts and Maintenance Manual AIR WINCH MODEL K5U & K5UL Warning! Review WINCH OPERATING PRACTICES Prior to use. Always operate, inspect and maintain this winch in accordance with American
More informationHYBRID ENGINE MOUNTING CRADLE KIT APRILIA RS250 FRAME / RZ/BANSHEE ENGINE
HYBRID ENGINE MOUNTING CRADLE KIT APRILIA RS250 FRAME / RZ/BANSHEE ENGINE Thank you for your purchase of the Hybrid Engine Mounting Cradle Kit. It is designed to allow you to mount any version of the Yamaha
More informationLadders. Werner Ladders / Series Round Rung Extension & Single Ladder
Werner 7100-2/7100-1 Series Round Rung Extension & Single Ladder 7116-2* 16 -- 13 7120-2 20 -- 17 7124-2 24 -- 21 7128-2 28 -- 25 7108-1 -- 8 -- 7110-1 -- 10 -- 7112-1 -- 12 -- 7114-1 -- 14 -- 7116-1 --
More informationCHASSIS & HOOD F L Ihr Ersatzteilspezialist im Internet
MODEL 000x0A CHASSIS & HOOD 0 0 MODEL 000x0A CHASSIS & HOOD 0 Seat E Hood 0x Washer 0 Bolt, Wing 00x Bolt, Carriage E0 Bracket, Hinge 00x Bolt, Shoulder 00x Bolt, Shoulder Rod, Battery 0x Nut, Flange E0
More informationRack Mountable (RM Series)
Rack Mountable (RM Series) W ASSEMBLY - VIEW FROM TOP HANLE HOLES ASSEMBLY - VIEW FROM FRONT H ASSEMBLY - VIEW FROM SIE For complete drawing information link here to our website covering this series. FEATURES
More informationPure & Tough For the Working Man
HCS Heavy Duty High Capacity Aluminum Side Mount Boxes Top Open, Single Lid (All Diamond Tread Bright Aluminum Finish). Description 1. An engineered blend of.063 and.100 diamond tread bright aluminum materials.
More information2018 Product Catalog
2018 Product Catalog Finyl Line T-Top and Deck Top Railing Finyl Line low-maintenance vinyl railing, reinforced with strong aluminum, adds character to your home while providing safety and security. Easy
More informationDVS / 31 DVI Shadowbox Face Installation Instructions (sku black: bronze: )
Packing List Shadowbox Face (3) 8-32 Nuts (10) 10-24 Type F Screws Face Bracket Hinge Bracket Latch Bracket Switch Bracket (used on 31 DVI only) LED Switch Bracket LED Mounting Plate Compatibility DVS
More informationAero Materiel. Locks and latches
Aero Materiel Locks and latches E3 Material and finish Zinc alloy, powder coated or chrome plated and steel plated Max static load 300N NEMA4/IP65 sealing is achieved by using optional flange gasket Recommended
More information600 SERIES STANDARD DUTY STRAIGHT TRACK INSTALLATION INSTRUCTIONS
600 SERIES STANDARD DUTY STRAIGHT TRACK INSTALLATION INSTRUCTIONS PLEASE READ INSTRUCTIONS THOROUGHLY BEFORE BEGINNING. A. BI-PARTING TRAVEL 1. Before raising track into position, determine location of
More informationKASON REACH-IN PRODUCTS
KASON REACH-IN PRODUCTS CONTENTS NUMERICAL INDEX... F2 HINGE SELECTOR CHART... F3 HINGES Edgemount Adjustable... F4-10 Edgemount Slimline...F4 Edgemount Standard...F5 Edgemount Spring... F6-10 Edgemount
More informationR. Lang Company SECTION C LIST PRICE SECTION A. Page 11. Tel: Fax: SECTION C
Page 11 SCREEN VIEWGUARD DOORS SECURITY DOORS VIEWGUARD SECURITY DOOR - C614 PART NO. Outside Frame Size Max Opening Size 36" x 4" 32" x 2" Pre-Hung Heavy-Duty Security Door (Surface Mount Only) 36" x
More informationLADDERS. Fiberglass Stepladder CSA Grade 1 - RED. Fiberglass Stepladder CSA Grade 1 - YELLOW. Wood Stepladder - 89 Series w/black End Caps
Fiberglass Stepladder CSA Grade 1 - RED Fiberglass Stepladder CSA Grade 1 - YELLOW Non-conducive Fiberglass Rails Double Riveting on each step Heavy duty molded plastic top Back-up Plates Reinforce all
More informationBESTEEL 170 SERIES CURTAIN TRACKS
BESTEEL 170 SERIES CURTAIN TRACKS BL = Black Finish 2XX Series Track Systems have a black finish. Parts Included 170 (270) 170 BESTEEL CWANA code CORD OPERATED/MOTORIZED 171 (271) 171-R (271-R) 260 172
More information24 MAXIM MULTI-POINT &
CASEMENT AWNING 24 MAXIM MULTI-POINT & Complementing the already popular Maxim Operator & Hinge System, the new Maxim Locking System proves to be the most attractive, easiest operating, highest performing,
More informationNest & Stack Totes EXTREMELY DURABLE INDUSTRIAL-GRADE TOTES
Nest & Stack Totes EXTREMELY DURABLE INDUSTRIAL-GRADE TOTES 580 585 6 590 595 500 55 50 50 Smooth surfaces are easy to clean Comfortable grip makes handling easy Ribs under the lip prevent jamming when
More information1000 SERIES SURFACE MOUNTED CLOSERS
1000 SERIES SURFCE MOUNTED CLOSERS PPLICTIONS n For aluminum, hollow metal, or wood swinging doors and frames. n Can be used with hinge or pivot mounted door. n Mounts on 1-3/ transom without adapter plates.
More informationEXHAUST FANS CUD & CUB UPBLAST FANS
EXHAUST FANS CUD & CUB UPBLAST FANS Suitable for roof or wall mount Backward inclined, non overloading wheels Spun aluminum housing Blades & inlets fabricated from aluminum Easy access to motor compartment
More information5300 Series 5300 SERIES
5300 Series Hager 5300 Series Grade 1 door closer is ideal for schools, hospitals, and other high abuse and high traffic environments. It is constructed of an aluminum alloy and provides smooth door control.
More informationCAREY AUTOMATIC DOOR, LLC
CAD CAREY AUTOMATIC DOOR, LLC MAGIC-DOOR Pneumatic Door Operator Replacement Parts Catalog (Formerly known as STANLEY MAGIC-DOOR Pneumatic Operator) Relays Checking Cylinders Power Cylinders Valve & Manifold
More informationDIFFERENTIAL. OL = Overall Length
3 Rear Axle Shafts Blazer 3- Jimmy 3-34-4 REAR AXLE SHAFT -/ GEAR WD BLZ JIM 3- ().44 4. 34- REAR AXLE SHAFT -/ GEAR WD BLZ JIM - () 4.4. 34- REAR AXLE SHAFT -/ GEAR 4WD BLZ JIM 3- ().44 4. 34- REAR AXLE
More informationSAFETY REASONABLE EFFORT. ANY BINDING, SAGGING, LOOSE HINGES, OR DAMAGED HINGES MUST BE REPAIRED BEFORE CONTINUING WITH THIS INSTALLATION!
Commercial Gentleman Door Operator Installation Instructions SAFETY THE COMMERCIAL GENTLEMAN IS A LOW ENERGY DOOR OPENER. PROPERLY ADJUSTED, THIS OPENER SHOULD BE EASY TO STOP WITH YOUR LITTLE FINGER.
More informationSPRING LOADED DEVICES
Spring Loaded Devices SPRING LOADED DE VICES Plungers: Plungers, Spring...38 39 Plungers, Spring, Metric... 40 41 Plungers, Shortie Spring... 42 Plungers, Shortie Spring Stainless Steel... 42 Plungers,
More information9550 SERIES FEATURES OPERATOR MOUNTS SIMULTANEOUS PAIR, SURFACE MOUNT *PULL SIDE PUSH SIDE DOUBLE EGRESS
MOUNTS SIMULTANEOUS PAIR, SURFACE MOUNT *PULL SIDE PUSH SIDE DOUBLE EGRESS 9550 SERIES The 9550 SENIOR by LCN is an ADA door operator that is a two-in-one swing door operator. SENIOR operators when activated,
More informationGEZE ELECTRICALLY OPERATED CHAIN DRIVES
GEZE RW exhaust systems GEZE ELECTRICLLY OPERTED CHIN DRIVES ccessories for GEZE electrically operated chain drives E820 GEZE drive fitting type for installation on frames and casements of bottom, top
More informationCONCEALED-HEAD SELF-CLINCHING STUDS AND STANDOFFS BULLETIN
ONEED-HED SE-INHING STUDS ND STNDOS BUETIN H 813 R e v 814 ONEED-HED SE-INHING STUDS ND STNDOS PEM self-clinching concealed-head studs and standoffs install permanently in steel or aluminum sheets as thin
More information