cover plate Instructions for Use suitable for Viega Eco Plus universal shower WC element, model from 08/2015 en_int

Transcription

1 cover plate Instructions for Use suitable for Viega Eco Plus universal shower WC element, model Model Year built: from 08/2015 en_int

2 cover plate 2 from 14

3 Table of contents Table of contents 1 About these instructions for use Target groups Labelling of notes About this translated version 5 2 Product information Standards and regulations Intended use Areas of use Product description Overview 7 3 Handling Assembly information Installation dimensions Required tools Assembly Preparing mounting Mounting the cover plate Mounting WC ceramic Disposal 14 cover plate 3 from 14

4 About these instructions for use 1 About these instructions for use Trade mark rights exist for this document; for further information, go to viega.com/legal. 1.1 Target groups The information in this instruction manual is directed at the following groups of people: Heating and sanitary professionals and trained personnel Individuals without the abovementioned training or qualification are not permitted to mount, install and, if required, maintain this product. This restriction does not extend to possible operating instructions. The installation of Viega products must take place in accordance with the general rules of engineering and the Viega instructions for use. 1.2 Labelling of notes Warning and advisory texts are set aside from the remainder of the text and are labelled with the relevant pictographs. DANGER! This symbol warns of possible life-threatening injury. WARNING! This symbol warns of possible serious injury. CAUTION! This symbol warns of possible injury. NOTICE! This symbol warns of possible damage to property. This symbol gives additional information and hints. cover plate 4 from 14

5 About these instructions for use 1.3 About this translated version This instruction for use contains important information about the choice of product or system, assembly and commissioning as well as intended use and, if required, maintenance measures. The information about the products, their properties and application technology are based on the current standards in Europe (e. g. EN) and/or in Germany (e. g. DIN/DVGW). Some passages in the text may refer to technical codes in Europe/ Germany. These should serve as recommendations in the absence of corresponding national regulations. The relevant national laws, standards, regulations, directives and other technical provisions take priority over the German/European directives specified in this manual: The information herein is not binding for other countries and regions; as said above, they should be understood as a recommendation. cover plate 5 from 14

6 Product information 2 Product information 2.1 Standards and regulations The following standards and regulations apply to Germany / Europe. National regulations can be found on the relevant web site of your country at viega.com/standards. Regulations from section: Preparing mounting Scope / Notice Regulations applicable in Germany Electrical installation VDE Intended use Areas of use This cover plate is only suitable for the Viega Eco Plus universal shower WC element (model ). The cover plate can only be used in combination with the following shower WC models: Geberit AquaClean 4000 WC top (article number xx.) Geberit AquaClean 5000 WC top (article number xx.x) Geberit AquaClean 5000 plus WC top (article number xx.x) Toto Washlet GL 2.0 with concealed connections (article number TCF6532C3GV1) Toto Washlet EK 2.0 with side connections (article number TCF6632G#NW1) Toto Washlet CF (article number TCF653G#NW1) Villeroy & Boch VICLEAN U (model number 5614UE) cover plate 6 from 14

7 Product information 2.3 Product description Overview Fig. 1: Components cover plate model cover frame 2 seal 3 cover plate 4 closing cap 5 flexible hose ½ inch 6 ball valve ½ inch 7 mounting bracket for the earthed wall socket cover plate 7 from 14

8 Handling 3 Handling 3.1 Assembly information Installation dimensions Fig. 2: Dimensions cover plate model Required tools The following tools are required for mounting: fork or ring spanner: 17 mm / 19 mm flat-blade screwdriver Spirit level Knife (cutter) handsaw cover plate 8 from 14

9 Handling 3.2 Assembly Preparing mounting The locating surface for the cover plate must be mounted flush with the finished wall surface Close water supply pipe to the Viega Eco Plus Universal shower WC element. Remove ½ inch plug. Seal ½ inch flexible hose and then screw into the T-piece. cover plate 9 from 14

10 Handling Screw the ½ inch ball valve onto the flexible hose. INFO! The earthing contact is not included in the scope of delivery. Mounting bracket for the earthing socket. We recommend using an earthing socket with a lid. Connect the mounting bracket for the earthing socket onto the WC element with the screws supplied. DANGER! Risk of electrocution Disconnect the electrical connection to the Viega Eco Plus Universal shower WC from the mains. Installation only by companies specialising in electrical work in compliance with the valid national regulations, see Ä Regulations from section: Preparing mounting on page 6. Lead the electrical connection for the shower WC into the junction box. Connect the earthing socket from the junction box. Loosen the four nuts on the element (size 17). Loosen the four front nuts on the sides of the locating surface. 17 cover plate 10 from 14

11 Handling Align all four points flush with the finished wall surface by unscrewing and screwing the threaded screws. Check the alignment with spirit level. Tighten the rear nuts at all four points (size 17), in the process, secure the threaded screws with a slotted screwdriver. 17 Tighten the front nuts at all four points (size 17). Check to ensure they are flush. 17 Unscrew the threaded rods for the fixing of the WC element to the required size and counter with nuts (size 19). 19 cover plate 11 from 14

12 Handling Mounting the cover plate Insert the seal on the front into the cover frame. Apply the silicone seal to the rear of the cover frame. Align the cover frame and attach it to the element by the supplied Phillips-head screws. cover plate 12 from 14

13 Handling Place the cover plate on the element. Lead the flexible hose through the top notch in the cover plate. Feed the plug through the top notch of the cover plate and plug it into the earthed wall socket. cover plate 13 from 14

14 Handling Mounting WC ceramic Cut flushing and drain pipe to length. Insert the closing cap into the upper opening of the cover plate. Lead the flexible hose and cable of the earthing plug through the gap of the closing cap. Cut the sound insulation panel to size. NOTICE! Do not use the cover plate as a support! Mount sound insulation panel and shower WC ceramic. Mount shower WC ceramic according to the manufacturer's instructions. Use the connecting material supplied for the water and electrical connection. Open the water supply pipe to the Viega Eco Plus Universal shower WC element. Open the ball valve of the shower WC / shower WC top. Connect the power supply to the concealed socket of the shower WC / shower WC top. Align and fix the shower WC ceramic. Seal the gap between WC ceramic and cover plate with silicone. 3.3 Disposal Separate the product and packaging materials (e. g. paper, metal, plastic or non-ferrous metals) and dispose of in accordance with valid national legal requirements. cover plate 14 from 14