TROX Prisliste Spjæld Riste Lyddæmpere K3-00

Transcription

1 TROX Prisliste 2019 Spjæld Riste Lyddæmpere K3-00

2 K1 - ARMATURER, RISTE Ceiling swirl diffusers AIRNAMIC...7 VDW...8 TDV-SilentAIR...9 RFD...10 FD...11 TDF-SilentAIR...12 VD...13 VDL...14 FDE...16 Design ceiling swirl diffusers XARTO...17 ADD...18 Ceiling swirl diffusers with perforated face plate DCS...19 Ceiling diffusers VDR...20 DLQ...21 DLQL...22 DLQ-AK...24 DLK-Fb...25 Slot diffusers for ceiling installation VSD VSD VSD35-TZ...29 VSD Slot diffusers for wall installation VSD50-1-LT...35 VSD35-3-AZ...36 Ventilation grilles for installation into walls, sills or rectangular ducts X-GRILLE Cover...37 X-GRILLE Basic...39 SL...43 TR...47 TRS...50 TRS-K...53 Ventilation grilles for floor installation ARR...54 Ventilation grilles for installation into circular ducts TRS-R...55 Volume flow rate balancing AGW...56 DGW...57 ASW...58 Displacement flow diffuser for Installation on a wall QLE...59 QLF...60 QLV...62 Displacement flow diffuser for wall installation QLW-AZ...64 Freestanding displacement flow diffuser QLV Displacement diffusers QSH...67 Impulse diffusers ISH...68 Jet nozzles TJN...69 Jet nozzles DUK...70 Disc valves LVS...72 Z-LVS...73 Floor diffusers FBA...74 FBK...75 Staircase swirl diffusers SD...76 Control units LON-WA TDC...77 K2 - KØLEBAFLER Units for suspended ceilings DID DID300B...80 DID DID DID600B-L...86 DID DID DID-R...91 Units for bulkheads DID-E...92 Freely suspended units SMART BEAM...93 IDH...94 Wall and under sill units QLI...95 Under sill units IDB...96 Under floor units BID...97 Passive chilled beams PKV...98 Control equipment for air-water systems LWS control equipment Under sill units FSL-B-ZAB SCHOOLAIR-B Vertical units FSL-V-ZAB SCHOOLAIR-V Ceiling units SCHOOLAIR-D Control systems X-AIRCONTROL Connecting hoses FS...108

3 K3 - SPJÆLD, RISTE, LYDDÆMPERE Multileaf dampers JZ Multileaf dampers JZ-LL External weather louvres WG WGK WGF WG-JZ WG-KUL Non-return dampers UL KUL ARK Pressure relief dampers ARK Shut-off dampers NAK Doors ST BS Splitter sound attenuators MSA XSA MSA, XSA MKA XKA RKA Circular silencers CA CB CS CF CAK K4 - BRANDSPJÆLD Fire dampers FK-EU FKA-EU FKS-EU FKR-EU FKRS-EU KU-K KA-EU FV-EU FVZ-K Smoke protection dampers JZ-RS Duct smoke detectors RM-O-VS-D RM-O-3-D Smoke control dampers EK-EU TROXNETCOM LON Modules TROXNETCOM AS-i Master and display units Controllers and repeaters Switching power supply units Power supply units Pre-configured switch boxes Modules AS-i installation Adjustment and addressing devices Decentralised operating and monitoring systems TNC-EASYCONTROL TNC-LINKBOX Modbus/BACnet modules K5 - REGULATORER VARYCONTROL LVC TVR TVJ TVT TZ-Silenzio TA-Silenzio TVZ TVA TVM TVRK Secondary silencers for VAV terminal units TS TX Control components for VAV terminal units RETROFIT RC Adjustment devices for VAV terminal units Adjustment devices Room control - X-AIRCONTROL X-AIR-ZMAS X-AIR-ZMO X-AIR-CP X-AIR-SENS CONSTANTFLOW RN EN VFC VFL EXCONTROL RN-Ex EN-Ex Actuators for CAV controllers Retrofit kits Shut-off dampers AK AKK Flow adjustment dampers VFR Volume flow rate measuring units VMR VMRK VME Heat exchanger WT WL EL K6 - EASYLAB - LABCONTROL Varycontrol TVLK BE-SEG BE-LCD TVLK VMLK TVRK...305

4 VMRK TVR VMR TVJ TVT VME TZ-Silenzio TA-Silenzio TVZ TVA TAM FSE Accessories Accessories for LABCONTROL Monitoring system FMS Sensor systems Differential pressure transducer Configuration software EasyConnect VAV terminal units TVR-Ex Shut-off dampers AK-Ex K7 - FILTRERING Standard cell frames SCF Filter wall SIF Mounting frames MF Mounting plates MP Universal casing UCA Ducted particulate filters KSF Ducted particulate filters for critical requirements KSFS Spigot KSFSSP Duct casings for particulate filters DCA Ceiling mounted particulate filters TFC Wall mounted particulate filter TFW Particulate filter modules for ceilings TFM Pharmaceutical clean room terminal filters TFP Pressure measuring devices MD Automatic roll filter media FMC Roll media FMR Cut-to-size pads FMP Z-line filters ZL Pocket filters made of non-woven chemical fibres PFC Pocket filters made of non-woven synthetic fibres PFS Pocket filters made of NanoWave medium PFN Pocket filters made of non-woven glass fibres PFG Filter inserts MFI Filter elements MFE Filter cells MFC Filter panels MFP Filter cartridges MFCA Filter panels for clean room technology MFPCR Filter panels with hood FHD Filter inserts ACFI Filter cartridges ACFC Filter cells ACF K8- X-CUBE X-CUBE X-CUBE compact XCC-RO XCC-ROM-HM XCC-HD XCC-HM XCC-HCM XCC-EHD XCC-CB XCC-CD XCC-S XCC-LON XCC-CPC XCC-V XCC-P XCC-LE Attachment Detail VARYCONTROL Control components Calculation example Splitter sound attenuators...431

5 Prisliste DKK 2019 brutto ekskl. moms MULTILEAF DAMPERS Multileaf dampers JZ (H) (B) For shutting off the airflow in air conditioning systems JZ P A2 G M L / / ER / Z64 / NC / P1 RAL... Type JZ Multileaf damper Function S Opposed (standard) P Parallel Material No entry: galvanised steel A2 Stainless steel Construction No entry: corner holes on both sides; plastic bearings G Flange holes on both sides (no corner holes) M Brass bearings E Stainless steel bearings M-V Brass bearings and reinforced blades (not for JZ-A2) E-V Stainless steel bearings and reinforced blades (not for JZ-A2) M, E, M-V, E-V can be combined with G Operating side No entry: on the right L Left side Nominal size [mm] B H B > 2000 = width subdivided H > 1998 = height subdivided Attachments No entry: without Z04 - Z07 Quadrant stay Z12 - Z51 Actuators ZF01 - ZF15 Spring return actuators Z60 - Z77 Pneumatic actuators Explosion-proof actuators Z1EX, Z3EX Electric Z60EX - Z77EX Pneumatic Damper blade safety function Only for spring return actuators and pneumatic actuators NO Pressure off/power off to OPEN NC Pressure off/power off to CLOSE Surface No entry: standard construction P1 Powder-coated, specify RAL CLASSIC colour PS Powder-coated, specify DB colour Gloss level RAL % RAL % All other RAL colours 70 % Installation subframe No entry: without ER With (only for construction G) NOTE Intermediate sizes: The price for the next larger size applies. Multileaf dampers: Sizes not given here are shipped in parts (subdivided). Prices for subdivided multileaf dampers (width B or height H subdivided) are calculated by adding the prices for multileaf dampers which are not subdivided. 109

6 MULTILEAF DAMPERS Multileaf dampers JZ Prisliste 2019 DKK brutto ekskl. moms JZ-S, JZ-P Flange holes on both sides of JZ-S JZ-P (Option G) JZ-S, JZ-P (Option M, E) H M E reinforced blades with JZ-S, JZ-P (Option V)

7 Prisliste DKK 2019 brutto ekskl. moms MULTILEAF DAMPERS Multileaf dampers JZ Installation subframe for JZ-S-G JZ-P-G (Option ER) JZ-S-A2, JZ-P-A2 Made of stainless steel (option A2) Flange holes on both sides of JZ-S-A2 JZ-P-A2 (Option G) JZ-S-A2, JZ-P-A2 (Option M, E) H M E

8 MULTILEAF DAMPERS Multileaf dampers JZ Prisliste 2019 DKK brutto ekskl. moms Installation subframe for JZ-P-A2-G JZ-S-A2-G (Option ER) Attachments for JZ-P JZ-S JZ-P-A2 JZ-S-A2 Prices apply only to factory fitting Quadrant stay Name Z04 Quadrant stay 249 Z05 Z06 Z07 Quadrant stay and limit switch for damper blade position CLOSED Quadrant stay and limit switch for damper blade position OPEN Quadrant stay and 2 limit switches for damper blade positions OPEN and CLOSED Spring return actuators (power off to close) Name Min. torque ZF02 U = AC V 10 Nm ZF07 U = AC V 20 Nm ZF12 U = AC 230 V 30 Nm ZF01 U = AC 24 V 10 Nm ZF06 U = AC 24 V 20 Nm ZF11 U = AC 24 V 30 Nm ZF04 ZF09 ZF14 ZF03 ZF08 ZF13 U = AC V with auxiliary switch U = AC V with auxiliary switch U = AC 230 V with auxiliary switch U = AC 24 V with auxiliary switch U = AC 24 V with auxiliary switch U = AC 24 V with auxiliary switch 10 Nm Nm Nm Nm Nm Nm Spring return actuators (power off to close), actuator without spring return Name Min. torque ZF05 U = AC 24 V 10 Nm ZF10 U = AC 24 V 20 Nm ZF15 U = AC 24 V 30 Nm

9 Prisliste DKK 2019 brutto ekskl. moms MULTILEAF DAMPERS Multileaf dampers JZ Open/Close actuators, reversible Name Min. torque Z43 U = AC 230 V 10 Nm Z12 U = AC 230 V 20 Nm Z13 U = AC 230 V 40 Nm Z45 U = AC 24 V 10 Nm Z14 U = AC 24 V 20 Nm Z15 U = AC 24 V 40 Nm Z47 Z16 Z17 Z49 Z18 Z19 U = AC 230 V with auxiliary switch U = AC 230 V with auxiliary switch U = AC 230 V with auxiliary switch U = AC 24 V with auxiliary switch U = AC 24 V with auxiliary switch U = AC 24 V with auxiliary switch Actuators, actuator without spring return Name Min. torque 10 Nm Nm Nm Nm Nm Nm Z51 U = AC 24 V 10 Nm Z20 U = AC 24 V 20 Nm Z21 U = AC 24 V 40 Nm Open/Close actuators, reversible, fast-running Name Min. torque ZS21 U = AC 24 V 15 Nm ZS22 U = AC 24 V with auxiliary switch Double-acting pneumatic rotary actuators Name Min. torque Z60 Double acting rotary actuator, operating pressure bar Z61 With solenoid valve, U = DC 24 V Z62 With solenoid valve, U = AC 230 V Z63 With limit switches for damper blade positions CLOSED and OPEN Z64 With solenoid valve, U = DC 24 V, limit switches for damper blade positions CLOSED and OPEN Z65 With solenoid valve, U = AC 230 V, limit switches for damper blade positions CLOSED and OPEN 15 Nm Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) ¹) Only up to height H < 1665 mm at 1.2 bar operating pressure ²) Only available with brass or stainless steel bearings (construction -M, -E) 113

10 MULTILEAF DAMPERS Multileaf dampers JZ Prisliste 2019 DKK brutto ekskl. moms Double-acting pneumatic rotary actuators Name Min. torque Z66 Double acting rotary actuator, operating pressure bar Z67 With solenoid valve, U = DC 24 V Z68 With solenoid valve, U = AC 230 V Z69 With limit switches for damper blade positions CLOSED and OPEN Z70 With solenoid valve, U = DC 24 V, limit switches for damper blade positions CLOSED and OPEN Z71 With solenoid valve, U = AC 230 V, limit switches for damper blade positions CLOSED and OPEN 70 Nm at 6 bar ¹) 70 Nm at 6 bar ¹) 70 Nm at 6 bar ¹) 70 Nm at 6 bar ¹) 70 Nm at 6 bar ¹) 70 Nm at 6 bar ¹) Single acting pneumatic rotary actuators Name Min. torque Z72 Single acting rotary actuator, operating pressure 6.0 bar Z73 With solenoid valve, U = DC 24 V Z74 With solenoid valve, U = AC 230 V Z75 With limit switches for damper blade positions CLOSED and OPEN Z76 With solenoid valve, U = DC 24 V, limit switches for damper blade positions CLOSED and OPEN Z77 With solenoid valve, U = AC 230 V, limit switches for damper blade positions CLOSED and OPEN 30 Nm Nm Nm Nm Nm Nm ¹) Only up to height H < 1665 mm at 1.2 bar operating pressure Electric explosion-proof spring return actuators Name Min. torque NET Z1EX Z3EX U = V AC/ DC with auxiliary switch U = V AC/ DC with auxiliary switch ²) Only available with brass or stainless steel bearings (construction variant -M, -E) 15 Nm ²) 30 Nm ²) Explosion-proof double acting pneumatic rotary actuators Name Min. torque Z60 EX Double acting rotary actuator, operating pressure bar Z61 EX With solenoid valve, U = DC 24 V Z62 EX Z63 EX With solenoid valve, U = AC 230 V With limit switches for damper blade positions CLOSED and OPEN Z64 EX With solenoid valve, U = DC 24 V, limit switches for damper blade positions CLOSED and OPEN Z65 EX With solenoid valve, U = AC 230 V, limit switches for damper blade positions CLOSED and OPEN 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) ¹) Only up to height H < 1665 mm at 1.2 bar operating pressure ²) Only available with brass or stainless steel bearings (construction variant -M, -E) 114

11 Prisliste DKK 2019 brutto ekskl. moms MULTILEAF DAMPERS Multileaf dampers JZ Explosion-proof double acting pneumatic rotary actuators Name Min. torque Z66 EX Double acting rotary actuator, operating pressure bar Z67 EX With solenoid valve, U = DC 24 V Z68 EX Z69 EX With solenoid valve, U = AC 230 V With limit switches for damper blade positions CLOSED and OPEN Z70 EX With solenoid valve, U = DC 24 V, limit switches for damper blade positions CLOSED and OPEN Z71 EX With solenoid valve, U = AC 230 V, limit switches for damper blade positions CLOSED and OPEN 70 Nm at 6 bar ²) 70 Nm at 6 bar ²) 70 Nm at 6 bar ²) 70 Nm at 6 bar ²) 70 Nm at 6 bar ²) 70 Nm at 6 bar ²) ²) Only available with brass or stainless steel bearings (construction variant -M, -E) Explosion-proof single acting pneumatic rotary actuators Name Min. torque Z72 EX Single acting rotary actuator, operating pressure 6.0 bar 30 Nm ²) Z73 EX With solenoid valve, U = DC 24 V 30 Nm ²) Z74 EX With solenoid valve, U = AC 230 V 30 Nm ²) Z75 EX With limit switches for damper blade positions CLOSED and OPEN Z76 EX Z77 EX With solenoid valve, U = DC 24 V, limit switches for damper blade positions CLOSED and OPEN With solenoid valve, U = AC 230 V, limit switches for damper blade positions CLOSED and OPEN ²) Only available with brass or stainless steel bearings (construction variant -M, -E) Surface finish for JZ-P, JZ-S, JZ-A2-P, JZ-A2-S 30 Nm ²) 30 Nm ²) 30 Nm ²) Name JZ-P, JZ-S JZ-A2-P, JZ-A2-S P1 Powder-coated, RAL CLASSIC colour P1 Powder-coated, RAL CLASSIC colour PS Powder-coated, DB701, DB702, DB703 RAL %, RAL %, other RAL CLASSIC colours 70 % Other RAL colours or gloss levels Powder-coated, DB701, DB702, DB703 Upon request Upon request Upon request 35 % of the base price 65 % of the base price Upon request 115

12 MULTILEAF DAMPERS Multileaf dampers JZ Prisliste 2019 DKK brutto ekskl. moms (H) (B) JZ AL / / ER / Z64 / NC / P1 RAL... Type JZ Multileaf damper made of aluminium Material AL Aluminium Nominal size [mm] B H Installation subframe No entry: without ER With Attachments No entry: without Z04 - Z07 Quadrant stay Z12 - Z51 Actuators ZF01 - ZF15 Spring return actuators Z60 - Z77 Pneumatic actuators Damper blade safety function Only for spring return actuators or pneumatic actuators NO Pressure off/power off to OPEN NC Pressure off/power off to CLOSE Surface No entry: standard construction P1 Powder-coated, specify RAL CLASSIC colour PS Powder-coated, specify DB colour S3 Anodised to EURAS standard, E6-C-0 Gloss level RAL % RAL % All other RAL colours 70 % NOTE Intermediate B sizes: The price for the next larger size applies. JZ-AL

13 Prisliste DKK 2019 brutto ekskl. moms MULTILEAF DAMPERS Multileaf dampers JZ Installation subframe for JZ-AL (Option ER) , Quadrant stay Name Z04 Quadrant stay 257 Z05 Z06 Z07 Quadrant stay and limit switch for damper blade position CLOSED Quadrant stay and limit switch for damper blade position OPEN Quadrant stay and 2 limit switches for damper blade positions OPEN and CLOSED Spring return actuator (power off to close), actuator without spring return Name Min. torque ZF05 U = AC 24 V 10 Nm Spring return actuators (power off to close) Name Min. torque ZF02 U = AC V 10 Nm ZF01 U = AC 24 V 10 Nm ZF04 ZF03 U = AC V with auxiliary switch U = AC 24 V with auxiliary switch Open/Close actuators, reversible Name Min. torque 10 Nm Nm Z42 U = AC 230 V 5 Nm Z43 U = AC 230 V 10 Nm Z12 U = AC 230 V 20 Nm Z44 U = AC 24 V 5 Nm Z45 U = AC 24 V 10 Nm Z14 U = AC 24 V 20 Nm Z46 Z47 Z16 Z48 Z49 Z18 U = AC 230 V with auxiliary switch U = AC 230 V with auxiliary switch U = AC 230 V with auxiliary switch U = AC 24 V with auxiliary switch U = AC 24 V with auxiliary switch U = AC 24 V with auxiliary switch 5 Nm Nm Nm Nm Nm Nm

14 MULTILEAF DAMPERS Multileaf dampers JZ Prisliste 2019 DKK brutto ekskl. moms Open/Close actuators, reversible, fast-running Name Min. torque ZS21 U = AC 24 V 15 Nm ZS22 U = AC 24 V with auxiliary switch Double-acting pneumatic rotary actuators Name Min. torque Z60 Double acting rotary actuator, operating pressure bar Z61 With solenoid valve, U = DC 24 V Z62 With solenoid valve, U = AC 230 V Z63 With limit switches for damper blade positions CLOSED and OPEN Z64 With solenoid valve, U = DC 24 V, limit switches for damper blade positions CLOSED and OPEN Z65 With solenoid valve, U = AC 230 V, limit switches for damper blade positions CLOSED and OPEN 15 Nm Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) Actuators, actuator without spring return Name Min. torque Z50 U = AC 24 V 5 Nm Z51 U = AC 24 V 10 Nm Z20 U = AC 24 V 20 Nm Double-acting pneumatic rotary actuators Name Min. torque Z66 Double acting rotary actuator, operating pressure bar Z67 With solenoid valve, U = DC 24 V Z68 With solenoid valve, U = AC 230 V Z69 With limit switches for damper blade positions CLOSED and OPEN Z70 With solenoid valve, U = DC 24 V, limit switches for damper blade positions CLOSED and OPEN Z71 With solenoid valve, U = AC 230 V, limit switches for damper blade positions CLOSED and OPEN 70 Nm at 6 bar ¹) 70 Nm at 6 bar ¹) 70 Nm at 6 bar ¹) 70 Nm at 6 bar ¹) 70 Nm at 6 bar ¹) 70 Nm at 6 bar ¹) ¹) Only up to height H < 1665 mm at 1.2 bar operating pressure ¹) Only up to height H < 1665 mm at 1.2 bar operating pressure ²) Only available with brass or stainless steel bearings (construction variant -M, -E) Single acting pneumatic rotary actuators Name Min. torque Z72 Single acting rotary actuator, operating pressure 6.0 bar 30 Nm Z73 With solenoid valve, U = DC 24 V 30 Nm Z74 With solenoid valve, U = AC 230 V 30 Nm Z75 Z76 Z77 With limit switches for damper blade positions CLOSED and OPEN With solenoid valve, U = DC 24 V, limit switches for damper blade positions CLOSED and OPEN With solenoid valve, U = DC 230 V, limit switches for damper blade positions CLOSED and OPEN Surface finish for JZ-AL 30 Nm Nm Nm Name JZ-AL P1 PS PS Powder-coated, RAL CLASSIC colour Powder-coated, RAL CLASSIC colour Powder-coated, DB701, DB702, DB703 RAL %, RAL %, other RAL CLASSIC colours 70 % Other RAL colours or gloss levels Powder-coated, DB701, DB702, DB703 S3 Anodised to EURAS standard, E6-C- Anodised to EURAS standard, E6-C % of the base price 80 % of the base price Upon request 40 % of the base price 118

15 Prisliste DKK 2019 brutto ekskl. moms MULTILEAF DAMPERS Multileaf dampers JZ-LL (H) (B) For extremely low-leakage shut-off in air conditioning systems JZ LL A2 G - E - V L / / ER / Z64 / NC / P1 RAL... Type JZ Multileaf damper Classification Closed blade air leakage to EN 1751 LL Classes 3-4 HL Classes 1-2 Material No entry: galvanised steel A2 Stainless steel (only for classification LL) Construction No entry: corner holes on both sides; plastic bearings G Flange holes on both sides (no corner holes) M Brass bearings E Stainless steel bearings M-V Brass bearings and reinforced blades (not for JZ-LL-A2) E-V Stainless steel plain bearings and reinforced blades (not for JZ-LL-A2) M, E, M-V, E-V can be combined with G Operating side No entry: on the right L Left side Nominal size [mm] B H B > 2000 = width subdivided H > 1998 = height subdivided Installation subframe No entry: without ER With (only for construction G) Attachments No entry: without Z04 - Z07 Quadrant stay Z12 - Z51 Actuators ZF01 - ZF15 Spring return actuators Z60 - Z77 Pneumatic actuators Explosion-proof actuators Z1EX, Z3EX Electric Z60EX - Z77EX Pneumatic Damper blade safety function Only for spring return actuators or pneumatic actuators NO Pressure off/power off to OPEN NC Pressure off/power off to CLOSE Surface No entry: standard construction P1 Powder-coated, specify RAL CLASSIC colour PS Powder-coated, specify DB colour Gloss level RAL % RAL % All other RAL colours 70 % NOTE Intermediate sizes: The price for the next larger size applies. Multileaf dampers: Sizes not given here are shipped in parts (subdivided). Prices for subdivided multileaf dampers (width B or height H subdivided) are calculated by adding the prices for multileaf dampers which are not subdivided. 119

16 MULTILEAF DAMPERS Multileaf dampers JZ-LL Prisliste 2019 DKK brutto ekskl. moms JZ-LL Leakage class JZ-HL Leakage class Flange holes on both sides of JZ-LL JZ-HL (Option G) JZ-LL, JZ-HL Option M E H M E

17 Prisliste DKK 2019 brutto ekskl. moms MULTILEAF DAMPERS Multileaf dampers JZ-LL reinforced blades with JZ-LL, JZ-HL (Option V) Installation subframe JZ-LL-G, JZ-HL-G (Option ER) JZ-LL-A

18 MULTILEAF DAMPERS Multileaf dampers JZ-LL Prisliste 2019 DKK brutto ekskl. moms Flange holes on both sides of JZ-LL-A2 (Option G) JZ-LL, JZ-HL Option M E H M E Installation subframe for JZ-LL-A2-G (Option ER) Quadrant stay Name Z04 Quadrant stay 233 Z05 Z06 Z07 Quadrant stay and limit switch for damper blade position CLOSED Quadrant stay and limit switch for damper blade position OPEN Quadrant stay and 2 limit switches for damper blade positions OPEN and CLOSED Spring return actuators (power off to close) Name Min. torque ZF02 U = AC V 10 Nm ¹) ZF07 U = AC V 20 Nm ¹) ZF12 U = AC 230 V 30 Nm ZF01 U = AC 24 V 10 Nm ¹) ZF06 U = AC 24 V 20 Nm ¹) ZF11 U = AC 24 V 30 Nm ZF04 ZF09 ZF14 ZF03 ZF08 ZF13 U = AC V with auxiliary switch U = AC V with auxiliary switch U = AC 230 V with auxiliary switch U = AC 24 V with auxiliary switch U = AC 24 V with auxiliary switch U = AC 24 V with auxiliary switch 10 Nm ¹) 20 Nm ¹) 30 Nm Nm ¹) 20 Nm ¹) 30 Nm ¹)The actuator type depends on the damper size (JZ-LL, JZ-LL-A2) 122

19 Prisliste DKK 2019 brutto ekskl. moms MULTILEAF DAMPERS Multileaf dampers JZ-LL Spring return actuators (power off to close), actuator without spring return Name Min. torque ZF05 U = AC 24 V 10 Nm ¹) ZF10 U = AC 24 V 20 Nm ¹) ZF15 U = AC 24 V 30 Nm ¹)The actuator type depends on the damper size (JZ-LL, JZ-LL-A2) Open/Close actuators, reversible Name Min. torque Z43 U = AC 230 V 10 Nm ¹) Z12 U = AC 230 V 20 Nm ¹) Z13 U = AC 230 V 40 Nm Z45 U = AC 24 V 10 Nm ¹) Z14 U = AC 24 V 20 Nm ¹) Z15 U = AC 24 V 40 Nm Z47 Z16 Z17 Z49 Z18 Z19 U = AC 230 V with auxiliary switch U = AC 230 V with auxiliary switch U = AC 230 V with auxiliary switch U = AC 24 V with auxiliary switch U = AC 24 V with auxiliary switch U = AC 24 V with auxiliary switch 10 Nm ¹) 20 Nm ¹) 40 Nm Nm ¹) 20 Nm ¹) 40 Nm ¹)The actuator type depends on the damper size (JZ-LL, JZ-LL-A2) Open/Close actuators, reversible, fast-running Name Min. torque ZS21 U = AC 24 V 15 Nm ²) ZS22 U = AC 24 V with auxiliary switch Double-acting pneumatic rotary actuators 15 Nm ²) ²)Only for damper nominal sizes that require a torque of up to 15 Nm (JZ-LL, JZ-LL-A2) Name Min. torque Price Z60 Double acting rotary actuator, operating pressure bar Z61 With solenoid valve, U = DC 24 V Z62 With solenoid valve, U = AC 230 V Z63 With limit switches for damper blade positions CLOSED and OPEN Z64 With solenoid valve, U = DC 24 V, limit switches for damper blade positions CLOSED and OPEN Z65 With solenoid valve, U = AC 230 V, limit switches for damper blade positions CLOSED and OPEN 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) ¹)The actuator type depends on the size and operating pressure of the damper ²)Only for damper nominal sizes that require a torque of up to 15 Nm (JZ-LL, JZ-LL-A) Actuators, actuator without spring return Name Min. torque Z51 U = AC 24 V 10 Nm ¹) Z20 U = AC 24 V 20 Nm ¹) Z21 U = AC 24 V 40 Nm Double-acting pneumatic rotary actuators Name Min. torque Z66 Double acting rotary actuator, operating pressure bar Z67 With solenoid valve, U = DC 24 V Z68 With solenoid valve, U = AC 230 V Z69 With limit switches for damper blade positions CLOSED and OPEN Z70 With solenoid valve, U = DC 24 V, limit switches for damper blade positions CLOSED and OPEN ¹)The actuator type depends on the damper size (JZ-LL, JZ-LL-A2) Z71 With solenoid valve, U = AC 230 V, limit switches for damper blade positions CLOSED and OPEN 70 Nm at 6 bar ¹) 70 Nm at 6 bar ¹) 70 Nm at 6 bar ¹) 70 Nm at 6 bar ¹) 70 Nm at 6 bar ¹) 70 Nm at 6 bar ¹) ¹)The actuator type depends on the size and operating pressure of the damper 123

20 MULTILEAF DAMPERS Multileaf dampers JZ-LL Prisliste 2019 DKK brutto ekskl. moms Single acting pneumatic rotary actuators Name Min. torque Z72 Single acting rotary actuator, operating pressure 6.0 bar Z73 With solenoid valve, U = DC 24 V Z74 With solenoid valve, U = AC 230 V Z75 With limit switches for damper blade positions CLOSED and OPEN Z76 With solenoid valve, U = DC 24 V, limit switches for damper blade positions CLOSED and OPEN Z77 With solenoid valve, U = AC 230 V, limit switches for damper blade positions CLOSED and OPEN Explosion-proof double acting pneumatic rotary actuators Name Min. torque Z60 EX Double acting rotary actuator, operating pressure bar Z61 EX With solenoid valve, U = DC 24 V Z62 EX Z63 EX With solenoid valve, U = AC 230 V With limit switches for damper blade positions CLOSED and OPEN Z64 EX With solenoid valve, U = DC 24 V, limit switches for damper blade positions CLOSED and OPEN Z65 EX With solenoid valve, U = AC 230 V, limit switches for damper blade positions CLOSED and OPEN 30 Nm Nm Nm Nm Nm Nm Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) ¹)The actuator type depends on the size and operating pressure of the damper ²) Only available with brass or stainless steel bearings (construction variant -M, -E) Electric explosion-proof spring return actuators Name Min. torque NET Z1EX Z3EX U = V AC/ DC with auxiliary switch U = V AC/ DC with auxiliary switch Explosion-proof double acting pneumatic rotary actuators Name Min. torque Z66 EX Double acting rotary actuator, operating pressure bar 15 Nm ²)³) 30 Nm ²) ²) Only available with brass or stainless steel bearings (construction -M, -E) ³)Only for damper nominal sizes that require a torque of up to 15 Nm (JZ-LL, JZ-LL-AL) Z67 EX With solenoid valve, U = DC 24 V Z68 EX Z69 EX With solenoid valve, U = AC 230 V With limit switches for damper blade positions CLOSED and OPEN Z70 EX With solenoid valve, U = DC 24 V, limit switches for damper blade positions CLOSED and OPEN Z71 EX With solenoid valve, U = AC 230 V, limit switches for damper blade positions CLOSED and OPEN 70 Nm at 6 bar ¹) 70 Nm at 6 bar ¹) 70 Nm at 6 bar ¹) 70 Nm at 6 bar ¹) 70 Nm at 6 bar ¹) 70 Nm at 6 bar ¹) ¹)The actuator type depends on the size and operating pressure of the damper / DE/en

21 Prisliste DKK 2019 brutto ekskl. moms MULTILEAF DAMPERS Multileaf dampers JZ-LL Explosion-proof single acting pneumatic rotary actuators Name Min. torque Z72 EX Single acting rotary actuator, operating pressure 6.0 bar Z73 EX With solenoid valve, U = DC 24 V Z74 EX With solenoid valve, U = AC 230 V 30 Nm ²) 30 Nm ²) 30 Nm ²) Z75 EX With limit switches for damper blade positions CLOSED and OPEN Z76 EX With solenoid valve, U = DC 24 V, limit switches for damper blade positions CLOSED and OPEN Z77 EX With solenoid valve, U = AC 230 V, limit switches for damper blade positions CLOSED and OPEN 30 Nm ²) 30 Nm ²) 30 Nm ²) ²) Only available with brass or stainless steel bearings (construction variant -M, -E) Surface finish for JZ-LL, JZ-HL, JZ-LL-A2 Name JZ-LL, JZ-HL JZ-LL-A2 P1 Powder-coated, RAL CLASSIC colour PS Powder-coated, RAL CLASSIC colour PS Powder-coated DB701, DB702, DB703 RAL %, RAL %, other RAL CLASSIC colours 70 % Other RAL colours or gloss levels Powder-coated DB701, DB702, DB703 Upon request Upon request Upon request 30 % of the base price 60 % of the base price Upon request 01/ DE/en 125

22 MULTILEAF DAMPERS Multileaf dampers JZ-LL Prisliste 2019 DKK brutto ekskl. moms (H) (B) JZ LL AL / / ER / Z64 / NO / P1 RAL... Type JZ Multileaf damper ZF01 - ZF15 Spring return actuators Z60 - Z77 Pneumatic actuators Classification Closed blade air leakage to EN 1751 LL Class 4 HL Class 2 Material No entry: galvanised steel AL Aluminium Nominal size [mm] B H Installation subframe No entry: without ER With installation subframe Attachments Z04 Quadrant stay Z05 - Z07 Quadrant stay and limit switches Z12 - Z51 Actuators Damper blade safety function Only for spring return actuators or pneumatic actuators NO Pressure off/power off to OPEN NC Pressure off/power off to CLOSE Surface No entry: standard construction P1 Powder-coated, specify RAL CLASSIC colour PS Powder-coated, specify DB colour S3 Anodised to EURAS standard, E6-C-0 Gloss level RAL % RAL % All other RAL colours 70 % NOTE Intermediate B sizes: The price for the next larger size applies. 126

23 Prisliste DKK 2019 brutto ekskl. moms MULTILEAF DAMPERS Multileaf dampers JZ-LL JZ-LL-AL Leakage class JZ-HL-AL Leakage class

24 MULTILEAF DAMPERS Multileaf dampers JZ-LL Prisliste 2019 DKK brutto ekskl. moms Installation subframe for JZ-LL-AL JZ-HL-AL (Option ER) , Quadrant stay Name Z04 Quadrant stay 241 Z05 Z06 Z07 Quadrant stay and limit switch for damper blade position CLOSED Quadrant stay and limit switch for damper blade position OPEN Quadrant stay and 2 limit switches for damper blade positions OPEN and CLOSED Spring return actuators (power off to close) Name Min. torque JZ-LL-AL JZ-HL-AL ZF02 ZF07 U = AC V U = AC V 10 Nm 4.491¹) Nm ZF12 U = AC 230 V 30 Nm ZF01 U = AC 24 V 10 Nm ¹) ZF06 U = AC 24 V 20 Nm ZF11 U = AC 24 V 30 Nm ZF04 ZF09 ZF14 ZF03 ZF08 ZF13 U = AC V with auxiliary switch U = AC V with auxiliary switch U = AC 230 V with auxiliary switch U = AC 24 V with auxiliary switch U = AC 24 V with auxiliary switch U = AC 24 V with auxiliary switch 10 Nm ¹) Nm Nm Nm ¹) Nm Nm ¹)Only up to height H 650 mm 128

25 Prisliste DKK 2019 brutto ekskl. moms MULTILEAF DAMPERS Multileaf dampers JZ-LL Spring return actuators (power off to close), actuator without spring return Name Min. torque JZ-LL-AL JZ-HL-AL ZF05 U = AC 24 V 10 Nm ¹) ZF10 U = AC 24 V 20 Nm ZF15 U = AC 24 V 30 Nm ¹)Only up to height H 650 mm Open / Close actuators, reversible Name Min. torque JZ-LL-AL JZ-HL-AL Z42 U = AC 230 V 5 Nm ²) Z43 U = AC 230 V 10 Nm 2 655¹) Z12 U = AC 230 V 20 Nm Z44 U = AC 24 V 5 Nm ²) Z45 U = AC 24 V 10 Nm 2 655¹) Z14 U = AC 24 V 20 Nm Z46 Z47 Z16 Z48 Z49 Z18 U = AC 230 V with auxiliary switch U = AC 230 V with auxiliary switch U = AC 230 V with auxiliary switch U = AC 24 V with auxiliary switch U = AC 24 V with auxiliary switch U = AC 24 V with auxiliary switch ¹)Only up to height H 650 mm ²)Only up to height H 450 mm 5 Nm ²) 10 Nm 3 258¹) Nm Nm ²) 10 Nm 3 258¹) Nm Actuators, actuator without spring return Name Min. torque JZ-LL-AL JZ-HL-AL Z50 U = AC 24 V 5 Nm ²) Z51 U = AC 24 V 10 Nm ¹) Z20 U = AC 24 V 20 Nm ¹)Only up to height H 650 mm ²)Only up to height H 450 mm Open/Close actuators, reversible, fast-running Name Min. torque JZ-LL-AL JZ-HL-AL ZS21 U = AC 24 V 15 Nm ZS22 U = AC 24 V with auxiliary switch 15 Nm

26 MULTILEAF DAMPERS Multileaf dampers JZ-LL Prisliste 2019 DKK brutto ekskl. moms Name Min. torque Z60 Double acting rotary actuator, operating pressure bar Z61 With solenoid valve, U = DC 24 V Z62 With solenoid valve, U = AC 230 V Z63 Single acting pneumatic rotary actuators Name Min. torque JZ-LL-AL JZ-HL-AL Z72 Z73 Z74 Z75 Z76 Z77 Single acting rotary actuator, operating pressure 6.0 bar With solenoid valve, U = DC 24 V With solenoid valve, U = AC 230 V With limit switches for damper blade positions CLOSED and OPEN With solenoid valve, U = DC 24 V, limit switches for damper blade positions CLOSED and OPEN With solenoid valve, U = AC 230 V, limit switches for damper blade positions CLOSED and OPEN Surface finish for JZ-LL-AL, JZ-HL-AL 30 Nm Nm Nm Nm Nm Nm Name JZ-LL-AL, JZ-HL-AL P1 PS PS With limit switches for damper blade positions CLOSED and OPEN Z64 With solenoid valve, U = DC 24 V, limit switches for damper blade positions CLOSED and OPEN Z65 With solenoid valve, U = AC 230 V, limit switches for damper blade positions CLOSED and OPEN Powder-coated, RAL CLASSIC colour Powder-coated, RAL CLASSIC colour Powder-coated, DB701, DB702, DB Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) 35 Nm at 6 bar ¹)²) RAL %, RAL %, other RAL CLASSIC colours 70 % Other RAL colours or gloss levels Powder-coated, DB701, DB702, DB703 S3 Anodised to EURAS standard, E6-C- Anodised to EURAS standard, E6-C- 0 0 ¹) Only up to height H < 550 mm at 1.2 bar operating pressure (JZ-LL-AL) ²) Only up to height H 750 mm at 1.2 bar operating pressure (JZ-HL-AL) Double-acting pneumatic rotary actuators Name Min. torque Z66 Double acting rotary actuator, operating pressure bar Z67 With solenoid valve, U = DC 24 V Z68 With solenoid valve, U = AC 230 V Z69 With limit switches for damper blade positions CLOSED and OPEN Z70 With solenoid valve, U = DC 24 V, limit switches for damper blade positions CLOSED and OPEN Z71 With solenoid valve, U = AC 230 V, limit switches for damper blade positions CLOSED and OPEN 50 % of the base price 80 % of the base price Upon request 40 % of the base price 70 Nm at 6 bar Nm at 6 bar Nm at 6 bar Nm at 6 bar Nm at 6 bar Nm at 6 bar

27 Prisliste DKK 2019 brutto ekskl. moms EXTERNAL WEATHER LOUVRES External weather louvres WG (H) (B) For the most diverse applications, available also in large sizes WG AL 2... / / ER / P1 RAL... Type WG External weather louvres Material No entry: galvanised sheet steel A2 Stainless steel AL Aluminium Construction No entry: wire mesh, galvanised steel (only WG, WG-AL) 1 Insect screen, galvanised steel (only WG, WG-AL) 2 Wire mesh, stainless steel (only WG-AL) 3 Wire mesh and insect screen, stainless steel, (only WG-AL, WG-A2) Border No entry: With fixing holes U Without fixing holes Installation subframe No entry: None ER With (not for construction without fixing holes) Surface No entry: standard construction P1 Powder-coated, RAL Classic colour PS Powder-coated, DB colour Only for WG-AL S2 Anodised to EURAS standard, E6-C- (31 to 35) S3 Anodised to EURAS standard, E6-C-0 Gloss level RAL % RAL % All other RAL colours 70 % Nominal size [mm] B H (B H > 4 m 2 when subdivided NOTE Intermediate sizes: The price for the next larger size applies. External weather louvres: Sizes not given here are shipped in parts (subdivided). Prices for subdivided external weather louvres (width B or height H subdivided) are calculated by adding the prices for weather louvres which are not subdivided. NOTE The nominal size of the product is not the same as the size of the installation opening. WG, WG-U

28 EXTERNAL WEATHER LOUVRES External weather louvres WG Prisliste 2019 DKK brutto ekskl. moms WG-1, WG-1-U Installation subframe for WG WG-1 (Option ER) WG-A2, WG-A2-U

29 Prisliste DKK 2019 brutto ekskl. moms EXTERNAL WEATHER LOUVRES External weather louvres WG WG-A2-3, WG-A2-3-U Installation subframe for WG-A2 WG-A2-3 (Option ER) WG-AL, WG-AL-U

30 EXTERNAL WEATHER LOUVRES External weather louvres WG Prisliste 2019 DKK brutto ekskl. moms WG-AL-1, WG-AL-1-U WG-AL-2, WG-AL-2-U WG-AL-3, WG-AL-3-U

31 Prisliste DKK 2019 brutto ekskl. moms EXTERNAL WEATHER LOUVRES External weather louvres WG Installation subframe for WG-AL, WG-AL-1, WG-AL-2, WG-AL-3 (Option ER) Surface finish for WG, WG-AL Name WG WG-AL P1 Powder-coated, RAL CLASSIC colour 50 % of the base price 40 % of the base price PS Powder-coated, RAL CLASSIC colour, gloss level Upon request Upon request Powder-coated, DB701, DB702, DB % of the base price 70 % of the base price S2 Anodised to EURAS standard, E6-C % of the base price S3 Anodised to EURAS standard, E6-C-0-40 % of the base price 135

32 EXTERNAL WEATHER LOUVRES External weather louvres WG Prisliste 2019 DKK brutto ekskl. moms (H) (B) Type WG-B width External weather louvre, for continuous horizontal runs of any Material AL Aluminium Section No entry: complete horizontal run, nominal size E-R Right end section E-L Left end section M Middle section Construction No entry: wire mesh, galvanised steel (only WG-B, WG-B-AL) 1 Insect screen, galvanised steel (only WG-B, WG-B-AL) 2 Wire mesh, stainless steel (only WG-B-AL) 3 Wire mesh and insect screen, stainless steel (only WG-B-AL, WG-B-A2) Border No entry: With fixing holes U Without fixing holes WG - B AL E R 2... / / ER / P1 RAL... Nominal size [mm] B H For complete horizontal run B 4 m: 2 end sections (E) B > 4 m: 2 end sections (E) and n middle sections (M) Installation subframe No entry: None ER With (not for construction without fixing holes) Surface No entry: raw aluminium P1 Powder-coated, RAL Classic colour PS Powder-coated, DB colour S2 Anodised to EURAS standard, E6-C- (31 to 35) S3 Anodised to EURAS standard, E6-C-0 Gloss level RAL % RAL % All other RAL colours 70 % NOTE Intermediate sizes: The price for the next larger size applies. Middle section M: only 2000 mm. For an alternative see WG-AL. NOTE The nominal size of the product is not the same as the size of the installation opening. WG-B-AL-E-R/L, WG-B-AL-E-R/L-U WG-B-AL-M WG-B-AL-M-U

33 Prisliste DKK 2019 brutto ekskl. moms EXTERNAL WEATHER LOUVRES External weather louvres WG WG-B-AL-E-R/L-1, WG-B-AL-E-R/L-1-U WG-B-AL-E-R/L-2, WG-B-AL-E-R/L-2-U WG-B-AL-E-R/L-3, WG-B-AL-E-R/L-3-U WG-B-AL-M-1 WG-B-AL-M-1-U WG-B-AL-M-2 WG-B-AL-M-2-U WG-B-AL-M-3 WG-B-AL-M-3-U

34 EXTERNAL WEATHER LOUVRES External weather louvres WG Prisliste 2019 DKK brutto ekskl. moms Installation frame, end section (Option ER) Installation subframe for the middle section (Option ER ) Surface finish for WG-B-AL Name WG-B-AL P1 Powder-coated, RAL CLASSIC colour RAL %, RAL %, other RAL CLASSIC colours 70 % 40 % of the base price Powder-coated, RAL CLASSIC colour Other RAL colours or gloss levels 70 % of the base price PS Powder-coated, DB701, DB702, DB703, Powder-coated, DB701, DB702, DB703 Upon request S2 Anodised to EURAS standard, E6-C Anodised to EURAS standard, E6-C % of the base price S3 Anodised to EURAS standard, E6-C-0 Anodised to EURAS standard, E6-C-0 40 % of the base price 138

35 Prisliste DKK 2019 brutto ekskl. moms EXTERNAL WEATHER LOUVRES External weather louvres WGK (H) (B) With small blade pitch WGK AL 3... / / ER / P1 RAL... Type WGK External weather louvre with small blade pitch Material AL Anodised aluminium Construction No entry: wire mesh, galvanised steel 1 Insect screen, galvanised steel 3 Insect screen, stainless steel Border No entry: With fixing holes U Without fixing holes Nominal size [mm] B H Installation subframe No entry: None ER With (not for construction without fixing holes) Surface No entry: anodised to EURAS standard, E6-C-0, S3, natural colour P1 Powder-coated, RAL Classic colour PS Powder-coated, DB colour S2 Anodised to EURAS standard, E6-C- (31 to 35) Gloss level RAL % RAL % All other RAL colours 70 % NOTE Intermediate B sizes: The price for the next larger size applies. NOTE The nominal size of the product is not the same as the size of the installation opening. WGK-AL, WGK-AL-U

36 EXTERNAL WEATHER LOUVRES External weather louvres WGK Prisliste 2019 DKK brutto ekskl. moms WGK-AL-1, WGK-AL-1-U WGK-AL-3, WGK-AL-3-U Installation subframe for WGK-AL, WGK-AL-1, WGK-AL-3 (Option ER)

37 Prisliste DKK 2019 brutto ekskl. moms EXTERNAL WEATHER LOUVRES External weather louvres WGK Surface finish for WGK-AL Name WGK-AL P1 Powder-coated, RAL CLASSIC colour RAL %, RAL %, other RAL CLASSIC colours 70 % 40 % of the base price Powder-coated, RAL CLASSIC colour Other RAL colours or gloss levels 70 % of the base price PS Powder-coated, DB701, DB702, DB703 Powder-coated, DB701, DB702, DB703 Upon request S2 Anodised to EURAS standard, E6-C Anodised to EURAS standard, E6-C % of the base price S3 Anodised to EURAS standard, E6-C-0 Anodised to EURAS standard, E6-C

38 EXTERNAL WEATHER LOUVRES External weather louvres WGF Prisliste 2019 DKK brutto ekskl. moms (H) (B) Specifically for façade installation WGF AL E 2 / / P1 RAL... Type WGF External weather louvres for façades Material No entry: galvanised steel AL Aluminium Section E Corner section T Middle section Construction No entry: wire mesh, galvanised steel 2 Wire mesh, stainless steel (only for material AL) Surface No entry: standard construction P1 Powder-coated, RAL Classic colour PS Powder-coated, DB colour Only for WGF-AL S2 Anodised to EURAS standard, E6-C- (31 to 35) S3 Anodised to EURAS standard, E6-C-0 Gloss level RAL % RAL % All other RAL colours 70 % Nominal size [mm] B H NOTE Intermediate B sizes: The price for the next larger size applies. WGF-T WGF-E Corner section H

39 Prisliste DKK 2019 brutto ekskl. moms EXTERNAL WEATHER LOUVRES External weather louvres WGF WGF-AL-T WGF-AL-E Corner section H WGF-AL-T WGF-AL-E-2 Corner section H Surface finish for WGF Name WGF WGF-AL P1 Powder-coated, RAL CLASSIC colour P1 Powder-coated, RAL CLASSIC colour PS Powder-coated, DB701, DB702, DB703 S2 S3 Anodised to EURAS standard, E6-C Anodised to EURAS standard, E6-C-0 RAL %, RAL %, other RAL CLASSIC colours 70 % Other RAL colours or gloss levels Powder-coated, DB701, DB702, DB703 Anodised to EURAS standard, E6-C Anodised to EURAS standard, E6-C-0 50 % of the base price 40 % of the base price 80 % of the base price 70 % of the base price Upon request Upon request - 60 % of the base price - 20 % of the base price 143

40 EXTERNAL WEATHER LOUVRES External weather louvres WG-JZ Prisliste 2019 DKK brutto ekskl. moms (H+80) (H+180) (B+80) (B+180) Combination with a multileaf damper WG AL 2... JZ P L / / ER / Z04 / NC / P1 RAL... Type WG-JZ Combination of external weather louvre and multileaf damper Material - WG No entry: galvanised steel AL Aluminium Construction - WG No entry: wire mesh, galvanised steel 1 Insect screen, galvanised steel 2 Wire mesh, stainless steel (only WG- AL) 3 Insect screen and wire mesh made of stainless steel (only WG-AL) WG border No entry: With fixing holes U Without fixing holes Function - JZ S Opposed (standard) P Parallel Operating side - JZ No entry: on the right L Left side Nominal size [mm] B H Installation subframe - WG No entry: None ER With (not for construction without fixing holes) Attachments - JZ No entry: None Z04 - Z07 Quadrant stay Z12 - Z51 Actuators ZF01 - ZF15 Spring return actuators Z60 - Z77 Pneumatic actuators Damper blade safety function - JZ Only for spring return actuators or pneumatic actuators NO Pressure off/power off to OPEN NC Pressure off/power off to CLOSE Surface - WG No entry: standard construction P1 Powder-coated, RAL Classic colour PS Powder-coated, DB colour S2 S3 Only for WG-AL Anodised to EURAS standard, E6-C- (31 to 35) Anodised to EURAS standard, E6-C-0 Gloss level RAL % RAL % All other RAL colours 70 % NOTE Intermediate B sizes: The price for the next larger size applies. NOTE The nominal size of the product is not the same as the size of the installation opening. WG-JZ-S WG-JZ-P

41 Prisliste DKK 2019 brutto ekskl. moms EXTERNAL WEATHER LOUVRES External weather louvres WG-JZ WG-1-JZ-S WG-1-JZ-P WG-AL-JZ-S WG-AL-JZ-P WG-AL-1-JZ-S WG-AL-1-JZ-P WG-AL-2-JZ-S WG-AL-2-JZ-P

42 EXTERNAL WEATHER LOUVRES External weather louvres WG-JZ Prisliste 2019 DKK brutto ekskl. moms WG-AL-3-JZ-S WG-AL-3-JZ-P Installation subframe ER for WG-JZ... (Option ER) NOTE The nominal size of the product is not the same as the size of the installation opening. Quadrant stay Name Z04 Quadrant stay 233 Z05 Z06 Z07 Quadrant stay and limit switch for damper blade position CLOSED Quadrant stay and limit switch for damper blade position OPEN Quadrant stay and 2 limit switches for damper blade positions OPEN and CLOSED

43 Prisliste DKK 2019 brutto ekskl. moms EXTERNAL WEATHER LOUVRES External weather louvres WG-JZ Spring return actuators (power off to close) Name Min. torque ZF02 U = AC V 10 Nm ZF07 U = AC V 20 Nm ZF12 U = AC 230 V 30 Nm ZF01 U = AC 24 V 10 Nm ZF06 U = AC 24 V 20 Nm ZF11 U = AC 24 V 30 Nm ZF04 ZF09 ZF14 ZF03 ZF08 ZF13 U = AC V with auxiliary switch U = AC V with auxiliary switch U = AC 230 V with auxiliary switch U = AC 24 V with auxiliary switch U = AC 24 V with auxiliary switch U = AC 24 V with auxiliary switch Open/Close actuators, reversible Name Min. torque 10 Nm Nm Nm Nm Nm Nm Z43 U = AC 230 V 10 Nm Z12 U = AC 230 V 20 Nm Z13 U = AC 230 V 40 Nm Z45 U = AC 24 V 10 Nm Z14 U = AC 24 V 20 Nm Z15 U = AC 24 V 40 Nm Z47 Z16 Z17 Z49 Z18 Z19 U = AC 230 V with auxiliary switch U = AC 230 V with auxiliary switch U = AC 230 V with auxiliary switch U = AC 24 V with auxiliary switch U = AC 24 V with auxiliary switch U = AC 24 V with auxiliary switch 10 Nm Nm Nm Nm Nm Nm Spring return actuators (power off to close), actuator without spring return Name Min. torque ZF05 U = AC 24 V 10 Nm ZF10 U = AC 24 V 20 Nm ZF15 U = AC 24 V 40 Nm Open/Close actuators, reversible, fast-running Name Min. torque Price ZS21 U = AC 24 V 15 Nm ZS22 U = AC 24 V with auxiliary switch 15 Nm Actuators, actuator without spring return Name Min. torque Z51 U = AC 24 V 10 Nm Z20 U = AC 24 V 20 Nm Z21 U = AC 24 V 40 Nm

44 EXTERNAL WEATHER LOUVRES External weather louvres WG-JZ Prisliste 2019 DKK brutto ekskl. moms Double-acting pneumatic rotary actuators Name Min. torque Z60 Double acting rotary actuator, operating pressure bar Z61 With solenoid valve, U = DC 24 V Z62 With solenoid valve, U = AC 230 V Z63 With limit switches for damper blade positions CLOSED and OPEN Z64 With solenoid valve, U = DC 24 V, limit switches for damper blade positions CLOSED and OPEN Z65 With solenoid valve, U = AC 230 V, limit switches for damper blade positions CLOSED and OPEN 35 Nm at 6 bar ¹) 35 Nm at 6 bar ¹) 35 Nm at 6 bar ¹) 35 Nm at 6 bar ¹) 35 Nm at 6 bar ¹) 35 Nm at 6 bar ¹) Double-acting pneumatic rotary actuators Name Min. torque Z66 Double acting rotary actuator, operating pressure bar Z67 With solenoid valve, U = DC 24 V Z68 With solenoid valve, U = AC 230 V Z69 With limit switches for damper blade positions CLOSED and OPEN Z70 With solenoid valve, U = DC 24 V, limit switches for damper blade positions CLOSED and OPEN Z71 With solenoid valve, U = AC 230 V, limit switches for damper blade positions CLOSED and OPEN 70 Nm at 6 bar Nm at 6 bar Nm at 6 bar Nm at 6 bar Nm at 6 bar Nm at 6 bar ¹) Only up to height H < 1665 mm at 1.2 bar operating pressure Single acting pneumatic rotary actuators Name Min. torque Z72 Single acting rotary actuator, operating pressure 6.0 bar Z73 With solenoid valve, U = DC 24 V Z74 With solenoid valve, U = AC 230 V Z75 With limit switches for damper blade positions CLOSED and OPEN Z76 With solenoid valve, U = DC 24 V, limit switches for damper blade positions CLOSED and OPEN Z77 With solenoid valve, U = AC 230 V, limit switches for damper blade positions CLOSED and OPEN 30 Nm Nm Nm Nm Nm Nm Surface finish for WG-JZ, WG-AL-JZ Note: Surface coating applies only for WG, not for the complete combination! Name WG-JZ WG-AL-JZ P1 PS Powder-coated, RAL CLASSIC colour Powder-coated, RAL CLASSIC colour Powder-coated, DB701, DB702, DB703 RAL %, RAL %, other RAL CLASSIC colours 70 % Other RAL colours or gloss levels 50 % of base price of WG 80% of base price of WG 40 % of base price for WG-AL 70 % of base price of WG-AL Powder-coated, DB701, DB702, DB703 Upon request Upon request 148

45 Prisliste DKK 2019 brutto ekskl. moms EXTERNAL WEATHER LOUVRES External weather louvres WG-JZ Name WG-JZ WG-AL-JZ S2 S3 Anodised to EURAS standard, E6- C Anodised to EURAS standard, E6- C-0 Anodised to EURAS standard, E6-C Anodised to EURAS standard, E6-C % of base price of WG-AL % of base price of WG-AL 149

46 EXTERNAL WEATHER LOUVRES External weather louvres WG-KUL Prisliste 2019 DKK brutto ekskl. moms (H+80) (H+180) (B+80) (B+180) Combination with a non-return damper WG AL 2... KUL 1 / / ER / P1 RAL... Type WG-KUL Combination of external weather louvre and non-return damper Material - WG No entry: galvanised steel AL Aluminium Construction - WG No entry: wire mesh 1 Insect screen, galvanised steel 2 Wire mesh, stainless steel (only WG-AL) 3 Insect screen and wire mesh made of stainless steel (only WG-AL) WG border No entry: With fixing holes U Without fixing holes Airflow direction 1 Fresh air opening 2 Exhaust air opening Nominal size [mm] B H Installation subframe - WG No entry: None ER With (not for construction without fixing holes) Surface - WG No entry: standard construction P1 Powder-coated, RAL Classic colour PS Powder-coated, DB colour Only for WG-AL S2 Anodised to EURAS standard, E6-C- (31 to 35) S3 Anodised to EURAS standard, E6-C-0 Gloss level RAL % RAL % All other RAL colours 70 % NOTE Intermediate B sizes: The price for the next larger size applies. NOTE The nominal size of the product is not the same as the size of the installation opening. WG-KUL / DE/en

47 Prisliste DKK 2019 brutto ekskl. moms EXTERNAL WEATHER LOUVRES External weather louvres WG-KUL WG-1-KUL WG-AL-KUL WG-AL-1-KUL WG-AL-2-KUL / DE/en 151

48 EXTERNAL WEATHER LOUVRES External weather louvres WG-KUL Prisliste 2019 DKK brutto ekskl. moms WG-AL-3-KUL Installation subframe ER for WG-...-KUL... (Option ER) Surface finish for WG-KUL, WG-AL-KUL Note: Surface coating applies only for WG, not for the complete combination! Name WG-KUL WG-AL-KUL P1 Powder-coated, RAL CLASSIC colour P1 Powder-coated, RAL CLASSIC colour PS Powder-coated, DB701, DB702, DB703 S2 S3 Anodised to EURAS standard, E6-C Anodised to EURAS standard, E6-C-0 RAL %, RAL %, other RAL CLASSIC colours 70 % Other RAL colours or gloss levels Powder-coated, DB701, DB702, DB703 Anodised to EURAS standard, E6-C Anodised to EURAS standard, E6-C-0 50 % of base price of WG 80% of base price of WG Upon request % of base price for WG- AL 70 % of base price of WG- AL Upon request 80 % of base price of WG- AL 40 % of base price of WG- AL 152

49 Prisliste DKK 2019 brutto ekskl. moms MECHANICALLY SELF-POWERED DAMPERS Non-return dampers UL (H) (B) For installation into walls or rectangular ducts UL 1 / / ER / P1 RAL... Type UL Non-return damper Airflow direction 1 Airflow directed towards the installation side 2 Airflow directed towards the rear side (suction) Nominal size [mm] B H Installation subframe No entry: none ER With Surface No entry: standard construction P1 Powder-coated, RAL CLASSIC colour PS Powder-coated, DB colour Gloss level RAL % RAL % All other RAL colours 70 % NOTE Intermediate B sizes: The price for the next larger size applies. NOTE The nominal size of the product is not the same as the size of the installation opening. UL-1 UL Installation subframe ER for UL-1 UL-2 (Option ER)

50 MECHANICALLY SELF-POWERED DAMPERS Non-return dampers UL Prisliste 2019 DKK brutto ekskl. moms Surface finish for UL Name UL P1 Powder-coated, RAL CLASSIC colour RAL %, RAL %, other RAL CLASSIC colours 70 % Upon request PS Powder-coated, RAL CLASSIC colour Other RAL colours or gloss levels Upon request Powder-coated, DB701, DB702, DB703 Powder-coated, DB701, DB702, DB703 Upon request 154

51 Prisliste DKK 2019 brutto ekskl. moms MECHANICALLY SELF-POWERED DAMPERS Non-return dampers KUL (H) (B) For installation into ductwork KUL G / / ER / P1 RAL... Type KUL Non-return damper Construction No entry: duct connection without flange holes G Duct connection, flange holes on both sides Nominal size [mm] B H Installation subframe No entry: none ER With (only KUL-G) Surface No entry: standard construction P1 Powder-coated, RAL CLASSIC colour PS Powder-coated, DB colour Gloss level RAL % RAL % All other RAL colours 70 % NOTE Intermediate B sizes: The price for the next larger size applies. KUL KUL-G

52 MECHANICALLY SELF-POWERED DAMPERS Non-return dampers KUL Prisliste 2019 DKK brutto ekskl. moms Installation subframe ER for KUL-G (Option ER) Surface finish for KUL Name KUL P1 Powder-coated, RAL CLASSIC colour RAL %, RAL %, other RAL CLASSIC colours 70 % Upon request PS Powder-coated, RAL CLASSIC colour Other RAL colours or gloss levels Upon request Powder-coated, DB701, DB702, DB703 Powder-coated, DB701, DB702, DB703 Upon request 156

53 Prisliste DKK 2019 brutto ekskl. moms MECHANICALLY SELF-POWERED DAMPERS Non-return dampers ARK (H) (B) For heavy duty applications ARK 1 A2 G / / ER / P1 RAL... Type ARK Non-return damper Blade mechanism No entry: linked blades 1 Blades with adjustable restrictors Material No entry: galvanised steel, with aluminium blades A2 Stainless steel with aluminium blades Construction No entry: duct connection without flange holes G Duct connection with flange holes Installation subframe No entry: none ER With (only for construction G) Surface No entry: standard construction P1 Powder-coated, RAL CLASSIC colour PS Powder-coated, DB colour Gloss level RAL % RAL % All other RAL colours 70 % Nominal size [mm] B H NOTE Intermediate B sizes: The price for the next larger size applies. ARK ARK ARK-A2 (Option A2) ARK1-A2 (Option A2)

54 MECHANICALLY SELF-POWERED DAMPERS Non-return dampers ARK Prisliste 2019 DKK brutto ekskl. moms Flange holes on both sides of ARK-G, ARK1-G (Option G) Installation subframe for ARK-G, ARK1-G (Option ER) Flange holes on both sides of ARK-A2-G, ARK1-A2-G (Option G) Installation subframe for ARK-A2-G, ARK1-A2-G (Option ER) Surface finish for ARK, ARK-1 Name ARK P1 Powder-coated, RAL CLASSIC colour RAL %, RAL %, other RAL CLASSIC colours 70 % 50 % of the base price (ARK) PS Powder-coated, RAL CLASSIC colour Other RAL colours or gloss levels 80 % of the base price (ARK) Powder-coated, DB701, DB702, DB703 Powder-coated, DB701, DB702, DB703 Upon request 158

55 Prisliste DKK 2019 brutto ekskl. moms MECHANICALLY SELF-POWERED DAMPERS Pressure relief dampers ARK2 (H) (B) For the prevention of excess pressure in rooms and air conditioning systems ARK2 A2 G / / ER /...Pa / P1 RAL... Type ARK2 Pressure relief damper Maximum differential pressure [Pa] Specify value in Pa Material No entry: galvanised steel, with aluminium blades A2 Stainless steel with aluminium blades Construction No entry: duct connection without flange holes G Duct connection with flange holes Nominal size [mm] B H Surface No entry: standard construction P1 Powder-coated, RAL CLASSIC colour PS Powder-coated, DB colour Gloss level RAL % RAL % All other RAL colours 70 % Installation subframe No entry: none ER With (only for construction G) NOTE Intermediate B sizes: The price for the next larger size applies. ARK Flange holes on both sides of ARK2 (Option G) ARK2-A Flange holes on both sides of ARK2-A2 (Option G)

56 MECHANICALLY SELF-POWERED DAMPERS Pressure relief dampers ARK2 Prisliste 2019 DKK brutto ekskl. moms Installation subframe for ARK2-G (Option ER) Installation subframe for ARK2-A2-G (Option ER) Surface finish for ARK2 Name ARK2 P1 Powder-coated, RAL CLASSIC colour RAL %, RAL %, other RAL CLASSIC colours 70 % 50 % of the base price (ARK) PS Powder-coated, RAL CLASSIC colour Other RAL colours or gloss levels 80 % of the base price (ARK) Powder-coated, DB701, DB702, DB703 Powder-coated, DB701, DB702, DB703 Upon request 160

57 Prisliste DKK 2019 brutto ekskl. moms GAS-TIGHT SHUT-OFF DAMPERS Shut-off devices NAK (H) (B) For the gas-tight shut-off of ducts NAK P G R / / Z05 Type NAK Shut-off damper, gas-tight Function H Hand wheel P Pneumatic actuator E Electric actuator 400 V E1 Electric actuator 230 V Construction No entry: duct connection without flange holes G Duct connection with flange holes Operating side R Right side L Left side Nominal size [mm] B H Attachments No entry: without Z01 - Z07 NOTE Intermediate B sizes: The price for the next larger size applies. NAK-H NAK-E NAK-P NAK-E NAK- (Option G)

58 GAS-TIGHT SHUT-OFF DAMPERS Shut-off devices NAK Prisliste 2019 DKK brutto ekskl. moms Attachments Name Price Z01 NAK-H, NAK-P, NAK-E, NAK-E1 Z02 NAK-H, NAK-P, NAK-E, NAK-E1 Z03 Z04 Z05 Z06 Z07 NAK-H, NAK-P, NAK-E, NAK-E1 NAK-P NAK-P NAK-P NAK-P Limit switch, indicating CLOSED Limit switch, indicating OPEN Limit switches, indicating blade OPEN and CLOSED 4/2-way solenoid valve 4/2-way solenoid valve and limit switch for damper blade position CLOSED 4/2-way solenoid valve and limit switch for damper blade position OPEN 4/2-way solenoid valve and limit switches for damper blade positions CLOSED and OPEN

59 Prisliste DKK 2019 brutto ekskl. moms DOORS Doors ST (H) (B) Single and double leaf hinged doors for plant rooms, storage rooms, air handling units, filter chambers, or enclosures for machinery or electrical equipment ST R X V / / 11 / Z01 / P1 RAL... Type ST Hinge R Right side L Left side Low-leakage steel door Sound insulating lining No entry: without X With Construction of door No entry: standard construction V Reinforced door leaf Nominal size [mm] B H flange holes, surcharge) Attachments No entry: without Z01 - Z23 Surface No entry: standard construction P1 Powder-coated, RAL CLASSIC colour PS Powder-coated, colour NCS, DB Gloss level RAL % RAL % All other RAL colours 70 % Door frame 11 Angle section 50/50/4, with welded fixing tabs 13 U-channel 115/40/4, with welded fixing tabs 15 U-channel 240/40/4, with welded fixing tabs 21 Angle section, without welded fixing tabs (alternatively with NOTE Intermediate sizes: The price for the next larger size applies. ST B H ST-R ST-L -X Door leaf V 16,- EUR 163

60 DOORS Doors ST Prisliste 2017 DKK brutto ekskl. moms ST accessories Name ST-R, ST-L Z01 Cylinder rim lock Z02 Mortice lock, ready to accommodate a profile cylinder Z03 Inspection window Z04 Pressure relief valve Z05 Removable front locking lever (of double lever locking device) Z06 Inspection window and cylinder rim lock Z07 Inspection window and mortice lock, ready to accommodate a profile cylinder Z08 Inspection window and pressure relief valve Z09 Surface for ST Inspection window and removable front locking lever (of double lever locking device) Prices for other accessories upon request P1 PS PS Powder-coated, RAL CLASSIC colour Powder-coated, RAL CLASSIC colour Powder-coated, DB701, DB702, DB703 Name RAL %, RAL %, other RAL CLASSIC colours 70 % Other RAL colours or gloss levels Powder-coated, DB701, DB702, DB % of the base price 100 % of the base price Upon request 164

61 Prisliste DKK 2017 brutto ekskl. moms DOORS Doors ST (H) (B) ST D X V / / 11 / Z01 / P1 RAL... Type ST Low-leakage steel door Number of door leaves D Double leaf low-leakage steel door Sound insulating lining No entry: without X With Construction of door No entry: standard construction V Reinforced door leaf Nominal size [mm] B H Attachments No entry: without Z01 - Z23 Surface No entry: standard construction P1 Powder-coated, RAL CLASSIC colour PS Powder-coated, colour NCS, DB Gloss level RAL % RAL % All other RAL colours 70 % Door frame 11 Angle section 50/50/4, with welded fixing tabs 13 U-channel 115/40/4, with welded fixing tabs 15 U-channel 240/40/4, with welded fixing tabs 21 Angle section, without welded fixing tabs (alternatively with flange holes) NOTE Intermediate sizes: The price for the next larger size applies. ST B/H ST-D -X Door leaf V 32,- EUR 165

62 DOORS Doors ST Prisliste 2019 DKK brutto ekskl. moms ST accessories Name ST-D Z01 Cylinder rim lock Z02 Mortice lock, ready to accommodate a profile cylinder Z03 Inspection window Z04 Pressure relief valve Z05 Removable front locking lever (of double lever locking device) Z06 Inspection window and cylinder rim lock Z07 Inspection window and mortice lock, ready to accommodate a profile cylinder Z08 Inspection window and pressure relief valve Z09 Surface for ST Inspection window and removable front locking lever (of double lever locking device) Prices for other accessories upon request P1 PS PS Powder-coated, RAL CLASSIC colour Powder-coated, RAL CLASSIC colour Powder-coated, DB701, DB702, DB703 Name RAL %, RAL %, other RAL CLASSIC colours 70 % Other RAL colours or gloss levels Powder-coated, DB701, DB702, DB % of the base price 100 % of the base price Upon request 166

63 Prisliste DKK 2019 brutto ekskl. moms DOORS Doors BS (H) (B) Inspection access doors for filter chambers, air handling units or other enclosures with machinery or equipment BS R / / Z03 / P1 RAL... Type BS Construction R Right side L Left side Low-leakage inspection access door Nominal size [mm] B H Attachments No entry: without Z01 - Z03 Z05 Surface No entry: standard construction P1 Powder-coated, RAL CLASSIC colour PS Powder-coated, colour NCS, DB Gloss level RAL % RAL % All other RAL colours 70 % NOTE Intermediate sizes: The price for the next larger size applies. BS B H BS BS accessories Base price Name BS Z01 Cylinder rim lock Z02 Mortice lock, ready to accommodate a profile cylinder Z03 Inspection window

64 DOORS Doors BS Prisliste 2019 DKK brutto ekskl. moms Name BS Z05 Removable front locking lever (of double lever locking device) Surface finish for BS Name BS P1 Powder-coated, RAL CLASSIC colour RAL %, RAL %, other RAL CLASSIC colours 70 % 70 % of the base price Powder-coated, RAL CLASSIC colour Other RAL colours or gloss levels 100 % of the base price PS Powder-coated, DB701, DB702, DB703 Powder-coated, DB701, DB702, DB703 Upon request 168

65 Prisliste DKK 2019 brutto ekskl. moms ATTENUATORS Splitter sound attenuators MSA (H) (B) (L) For increased insertion loss and broadband attenuation even in the low frequency range MSA P F / Type MSA Splitter sound attenuator with casing W Angle section frame mm (required for sound attenuators with width and/or height subdivided) Splitter thickness [mm] Airway width (distance between splitters) [mm] No. of splitters Splitter surface F Glass fibre fabric L Glass fibre fabric and perforated sheet metal Nominal width B [mm] Nominal height H [mm] Nominal length L in airflow direction [mm] Duct connection P Standard flange 30 mm NOTE The price of a Type MSA or XSA sound attenuator is made up of several parts. - - sound attenuator casing - - angle section frame - - matching frame (if any) - - MKA or XKA or RKA splitters 169

66 ATTENUATORS Splitter sound attenuators XSA Prisliste 2019 DKK brutto ekskl. moms (H) (B) (L) For high insertion loss with broadband damping, even in the high-frequency range XSA P F / Type XSASplitter sound attenuator with casing Splitter thickness [mm] Airway width (distance between splitters) [mm] Number of splitters Duct connection PStandard flange 30 mm WAngle section frame mm (required for sound attenuators with width and/or height subdivided) Splitter surface FGlass fibre fabric LGlass fibre fabric and perforated sheet metal Nominal width B [mm] Nominal height H [mm] Nominal length in airflow direction L [mm] NOTE The price of a Type MSA or XSA sound attenuator is made up of several parts. - - sound attenuator casing - - angle section frame - - matching frame (if any) - - MKA or XKA or RKA splitters 170

67 Prisliste DKK 2019 brutto ekskl. moms ATTENUATORS Splitter sound attenuators MSA, XSA Casing of MSA, XSA L=500 (Option ) Casing of MSA, XSA L=750 (Option ) Casing of MSA, XSA L=1000 (Option )

68 ATTENUATORS Splitter sound attenuators MSA, XSA Prisliste 2019 DKK brutto ekskl. moms Casing of MSA, XSA L=1250 (Option ) Casing (L=1500) for MSA, XSA L=1500 (Option )

69 Prisliste DKK 2019 brutto ekskl. moms ATTENUATORS Splitter sound attenuators MSA, XSA Angle section frame (35x3) for MSA or XSA casing Matching frame for angle frame (35x3)

70 ATTENUATORS Splitter sound attenuators MSA, XSA Prisliste 2019 DKK brutto ekskl. moms Matching frame for standard flange

71 Prisliste DKK 2019 brutto ekskl. moms ATTENUATORS Splitters MKA (H) (L) For increased insertion loss and broadband attenuation even in the low frequency range MKA200 F / Type MKA Sound attenuator splitter with resonating panels Splitter thickness [mm] Splitter surface F Glass fibre fabric L Glass fibre fabric and perforated sheet metal Height H [mm] Length L in airflow direction [mm] NOTE Accessories for U cover/clamping plates with divided splitter construction variant: see the sound attenuator splitter type price table. Prices for individual sound attenuators can be determined using our Easy Product Finder design programme. Type MKA 100-F Type MKA 100-L

72 ATTENUATORS Splitters MKA Prisliste 2019 DKK brutto ekskl. moms Type MKA 200-F Type MKA230-F Type MKA 200-L Type MKA230-L

73 Prisliste DKK 2019 brutto ekskl. moms ATTENUATORS Splitters XKA (H) (L) For high insertion loss with broadband damping, even in the high-frequency range XKA200 F / Type XKA Sound attenuator splitter Splitter thickness [mm] Splitter surface F Glass fibre fabric L Glass fibre fabric under perforated sheet metal Height H [mm] Length L in airflow direction [mm] NOTE Accessories for U cover/clamping plates with divided splitter construction variant: see the sound attenuator splitter type price table. Prices for individual sound attenuators can be determined using our Easy Product Finder design programme. Type XKA 100-F Type XKA 100-L

74 ATTENUATORS Splitters XKA Prisliste 2019 DKK brutto ekskl. moms Type XKA 200-F Type XKA230-F Type XKA 200-L Type XKA230-L

75 Prisliste DKK 2019 brutto ekskl. moms ATTENUATORS Splitters XKA Type XKA 300-F Type XKA 300-L

76 ATTENUATORS Splitters RKA Prisliste 2019 DKK brutto ekskl. moms (H) (L) Parts kit for high insertion loss in the low-frequency range RKA200 D / Type RKA Sound attenuator splitter Splitter thickness [mm] 200 Resonator construction Optimised for the following frequencies A 250/125 Hz B 125/250 Hz C 125/63 Hz D 63/125 Hz Height H [mm] Length L in airflow direction [mm] Type RKA 200-A Type RKA 200-B

77 Prisliste DKK 2019 brutto ekskl. moms ATTENUATORS Splitters RKA Type RKA 200-C Type RKA 200-D SD-KAP... H max = SD-KBLECH L 259 Fitting accessories for sound attenuator splitters SD-KBLECH SD-KAP100 SD-KAP200 SD-KAP230 Part Clamp sheet for MKA, XKA U-sheet for MKA-100, XKA-100 U-sheet for MKA-200, XKA-200, RKA-200 U-sheet for MKA-230, XKA SD-KAP300 U-sheet for XKA

78 ATTENUATORS Rohrschalldämpfer CA Prisliste 2019 DKK brutto ekskl. moms For the reduction of noise in circular ducts, galvanised sheet steel construction CA 050 / / GZ / VF2 Type CA Circular silencer Insulation thickness [mm] Nominal size [mm] 100, 125, 160, 200, 250, 315, 400, 450, 500, 560, 630, 710, 800 Nominal length [mm] Matching flange No entry: none GE on one end (only VF1) GZ on both ends (only VF2) Type of connection No entry: spigot VD2 Spigot with lip seal on both ends VF1 Flange on one end VF2 Flanges on both ends Type CA Nominal size CA050 CA100 CA050 CA GE GZ VD2 VF1 VF

79 Prisliste DKK 2019 brutto ekskl. moms ATTENUATORS Rohrschalldämpfer CB For the increased reduction of noise in circular ducts, galvanised sheet steel construction CB 050 / / GZ / VF2 Type CB Circular silencer with pod Insulation thickness [mm] Nominal size [mm] 250, 315, 400, 450, 500, 560, 630, 710, 800, 900, 1000 Length [mm] 500, 1000, 1500 Matching flange No entry: none GE on one end (only VF1) GZ on both ends (only VF2) Type of connection No entry: spigot VD2 VF1 VF2 Spigot with lip seal on both ends (up to nominal size 800) Flange on one end Flanges on both ends Type CB Nominal size CB050 CB100 CB050 CB GE GZ VD2 VF1 VF

80 ATTENUATORS Rohrschalldämpfer CS Prisliste 2019 DKK brutto ekskl. moms For the reduction of noise in circular ducts, aluminium construction CS 025 / / VD2 Type CS Circular silencer Insulation thickness [mm] Nominal size [mm] 80, 100, 125, 160, 200, 250, 315, 400 Nominal length [mm] 500, 1000, 1500 Type of connection No entry: spigot VD2 Spigot with lip seal on both ends AS2 Socket-type spigots on both ends BK2 Raised edges at both ends Type CS Nominal size CS 025 CS 050 CS 025 CS VD2 AS2 BK

81 Prisliste DKK 2019 brutto ekskl. moms ATTENUATORS Rohrschalldämpfer CF For the reduction of noise in circular ducts, flexible aluminium construction CF 025 / / VD2 Type CF Flexible circular silencer Insulation thickness [mm] Nominal size [mm] 80, 100, 125, 160, 200, 250, 315, 400 Nominal length [mm] 500, 1000, 1500, 2000 Type of connection No entry: spigot VD2 Spigot with lip seal on both ends AS2 Socket-type spigots on both ends BK2 Raised edges at both ends Type CF Nominal size CF 025 CF 050 CF 025 CF VD2 AS2 BK

82 ATTENUATORS Rohrschalldämpfer CAK Prisliste 2019 DKK brutto ekskl. moms For the reduction of noise in plastic circular ducts for contaminated air CAK / / GZ / VF2 Type CAK Circular silencer Nominal size [mm] 125, 160, 200, 250, 315, 400 Length [mm] 500, 1000, 1500 Matching flange No entry: none GZ on both ends (only VF2) Type of connection No entry: spigot VF2 Flanges on both ends Type CAK Nominal size GZ VF

83 TROX Danmark A/S Lyskær Herlev Tlf.: Salgskontor Danmark Lysholt Allé Vejle Tlf.: