Vibratorplatta MIKASA MVC-T90H

Size: px

Start display at page:

Download "Vibratorplatta MIKASA MVC-T90H"

Austin Bell
5 years ago
Views:

e-post hemsida Version Box 6060 Landsvägen 1 08-754

1 Vibratorplatta MIKASA MVC-T90H Reservdelskatalog EPOX Maskin AB Postadress Besöksadress Telefon e-post hemsida Version Box 6060 Landsvägen info@epox.se Sollentuna Sollentuna

2 COVER

3 How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part and the old one. XX : Not Interchangeable between new and old. OX : New part is usable for the old machine but the old part is not usable for the new machine. XO : The old part is usable for the new machine but the new part is not usable for the old machine. Note : In case of the lack of interchangeability between the new part and old part,a new part may be used by replacing all other parts found in the assembly. In this case, refer to section 2 for instruction on identifying other parts involved in a new assembly. AD : Newly established(added) DC : Suspended(discontinued) NC : Part number changed QC : Quantity used has been changed NS : Not supplied individually but supplied in an assembly or a group. AS : Special part designed to allow interchangeability between new and old part. CR : Correction Section 2 : Items Found In Remark Column Serial Numbers Where indicated, this indicates a serisl number range (inclusive) where a particular part is used. Model Number Where indicated, this shows that the corresponding part is utilized only with this specific model number or model number variant. # or : All parts with the same number following # or belong to the same assembly. this part cannot be interchanged individually with any other assemblies to replace an old part (indicated by #), with a new part(indicated by ), then all other parts of that assembly must be replaced with new ones. Note : If more than one of the same reference number is listed, the last one listed indicates newest(or latest)part available. Section 3: Example REF NO. PART NO. PART NAME Q TY MRK REMARKS 457(1) Hinge Metal, Upper/24g #3 (5) 457(2) Hinge Metal, Upper M16 1 OX(3) U1071-(6) 3(7) (1) Old part (2) New part (3) New part usable with old machine, but old part not usable with new machine (reference section 1). (4) Old part number is used through this machine serial number. (5) Old part, used in an assembly with other parts marked with #3. To use this part on a new machine, all other parts in this assembly must be replaced with old ones. (6) New part put into use starting with this serial number and is still current. (7) New part used in an assembly with other parts marked 3, to use this part as a replacement for an old part, all other 3 marked parts must be changed at the same time. Section 4: Items Found In MK2 Column (only for suspended products)! OO ( OO is shown in figure) : The part shown in lower line is supplied.! SD : Not available due to termination of production.! NS : Not supplied individually, but supplied in an assembly or a group.! PD : Supplied as unit product. SS : Not available after stock run out. (The contents of this parts catalog are subject to change without notice.)

4 1. BODY

5 1. BODY NO. PART/NO. Parts Name Q'TY MK MK2 REMARKS A VAS HANDLE AY/MVC-T90,88V 1 T90H VAS VIBRATING PLATE/T90 1 T90H VIBRATING PLATE COMB,TYPE 1 T90H VAS SHOCK ABSORBER NUT M SW M BOLT 12X20 T PW M CLUTCH AY/T90/19.05MM 1 INCH SHAFT CLUTCH DRUM 85/MVC-T CLUTCH SHOE&BOSS AY/ INCH SHZFT STOP RING S STOP RING R BEARING 6006DDU BASE /MVC-T BOLT 10X25 T SW M BOLT 8X50 T SW M PW M ENGINE NUT/MVC-T ENGINE NUT(W/BOLT)/T EARTH WIRE PW M NYLON NUT M RUBBER PLATE 25X25X V-BELT RPF BELT COVER(IN)/MVC-T BELT COVER /EXP/MVC-T BOLT 8X25 T SW M PW M BOLT 8X20 T HANDLE /MVC-T90 1 T90H COLLAR 13X20X44 ZN/T RUBBER 20X32X28.5/52H HANDLE STOPPER /MVC WASHER 12.5X35X BOLT 12X65 T SW M VAS HANDLE BODY/MVC-T90,88V 1 T90H VAS GRIP.VAS HANDLE/MVC-T90,88V 1 T90H VAS HANDLE NUT,VAS HANDLE/88G 2 T90H VAS

6 1. BODY

7 1. BODY NO. PART/NO. Parts Name Q'TY MK MK2 REMARKS RUBBER,VAS HANDLE/MVC-88G 2 T90H VAS SUNK HEAD BOLT 10X20 T 2 T90H VAS BOLT 10X25 T SW M GUARD HOOK /MVC-T90H ENGINE AY/GX160UT2-QMX2 1 INCH SHAFT ZE1-600 KEY 4.78X4.78X SPACER WASHER SOCKET HEAD BOLT 5/16X24 1

8 2. VIBRATOR

9 2. VIBRATOR NO. PART/NO. Parts Name Q'TY MK MK2 REMARKS PLUG 1/4X14 13L PACKING 1/4 (CU) ECCENTRIC ROTATOR/T BEARING 6211C CASECOVER(R)/MVC-T CASE COVER(L)/MVC-T BELT COVER GUARD/T OIL SEAL TC O-RING G BOLT 8X20 T SW M PULLEY 64/T KEY 7X7X19 R WASHER 11X40X BOLT 10X25 T SW M10 1

10 3. TRANSPORT WHEEL(OPTION)

11 3. TRANSPORT WHEEL(OPTION) NO. PART/NO. Parts Name Q'TY MK MK2 REMARKS BOLT 6X20 T SW M NUT M PW M BOLT 10X30 T SW M SPACER,WHEEL/MVC-T BRACKETS,WHEEL/T BOLT 10X35 T PW M CONICAL SPRING WASHER M NUT M NUT M10, H= VEHICLE AXLE/MVC-T WHEEL 12.2DX130X42B/T WASHER NUT M SW M STOPPER RUBBER ( 70 ) /MT NUT M STOPPER,LOCK PIN/MVC-T BOLT 6X20 T SW M NUT M LOCK HOLDER,WHEEL/T LOCK PIN,WHEEL/MVC-T SPRING /MVH LOCK KNOB,WHEEL/MVC-T SPRING PIN 3X WASHER 6.5X16X COLLAR 6.2X9X4 ZN LOCKWIRE, HANDLE /MVC-T BOLT 6X25 T SW M NUT M6 1

12 4. SPRINKING EQUIPMENT(OPTION)

13 4. SPRINKING EQUIPMENT(OPTION) NO. PART/NO. Parts Name Q'TY MK MK2 REMARKS WATER TANK W/CAP(OR/T90) 1 ORANGE WATER TANK W/CAP(GR/T90) 1 GREEN WATER TANK W/CAP(W/T90) 1 WHITE WASHER 14.5X30X PACKING 13X28X2 1 1 OR COCK PT1/4, BH-1211(AL)/R SPRINKLING PIPE /MVC PIPE HOLDER (L) /MVC PIPE HOLDER (R) /MVC BOLT 8X25 T STAY, PIPE HOLDER /MVC CAP,WATER TANK(NBR) BOLT 10X30 U PW M10(SUS) NUT M10(SUS) PW M8 1

14 5. BLOCK PLATE (OPTION)

15 5. BLOCK PLATE (OPTION) NO. PART/NO. Parts Name Q'TY MK MK2 REMARKS HANGER(BLOCK PLATE)/T90 1 T90H VAS BOLT 12X30 T 2 T90H VAS SW M12 2 T90H VAS PLATE (BLOCK PLATE)/T90 1 T90H VAS BOLT 8X35 T 4 T90H VAS NYLON NUT M8 4 T90H VAS RUBBER PLATE(BLOCK PLATE) 1 PD!PD NON-SALE

16 6. NAME PLATES

17 6. NAME PLATES NO. PART/NO. Parts Name Q'TY MK MK2 REMARKS A DECAL,SET/MVC-MCD/EXP,EU 1 INCL SERIAL NO. PLATE/T90H/5CE 1 NS 5LANGUAGE S SERIAL NO. PLATE/T90HVAS5 1 NS 5LANGUAGE S DECAL,POSITION,APO./T DECAL,DO NOT LIFTING 1 SET!! DECAL,LIFTING POSITION 1 SET!! DEAL,CAUTION ICONS 1 SET!! DECAL,ENGINE HANDLING /GS 1 SET! DECAL, MIKASA MARK 120X DECAL,MIKASA MARK 125MM DECAL, IMER 1 IMER DECAL,EC NOISE REQ.LWA DECAL, IMER,3ANS GARANTIE 1 IMER Z4H Z4M- 800 MARK,OP-CAUTION/GX160UT2 1 EU GX160 MARK.EX.CAUTION(PICTOGRAP 1 EU GX160

hemsida Version Box 6060 Landsvägen 1 08-754 71 60

18 Bensinmotor HONDA GX160UT2-QMXC Reservdelskatalog EPOX Maskin AB Postadress Besöksadress Telefon e-post hemsida Version Box 6060 Landsvägen info@epox.se Sollentuna Sollentuna

19 CYKINDER HEAD

20 CYKINDER HEAD NO. PART/NO. Parts Name Q'TY MK MK2 REMARKS ZE ZE Z4M ZE ZL Z4M ZE ZE ZE ZE1- GUIDE,INLET VALVE(O.S.) 1 GUIDE,EXHAUST VALVE(O.S.) 1 HEAD COMP,CYLINDER 1 CLIP,VALVE GUIDE 1 GASKET, CYLINDER HEAD 1 COVER COMP,HEAD/UT2QXC9 1 PACKING,HEAD COVER 1 TUBE,BREATHER 1 FLANGE BOLT 6X12 4 STUD BOLT 6X112 2 STUD BOLT 8X KNOCK PIN 10X BOLT,FLANGE 8X SPARK PLUG /BPR6ES CLIP,TUBE(C12) 2

21 CYLINDER BARREL

22 CYLINDER BARREL NO. PART/NO. Parts Name Q'TY MK MK2 REMARKS 1 12-Z4M Z4M Z4M Z4M ZE Z4M Z4M ZE ZE ZE ZF Z0T BARREL,AY CYLINGER(OIL AL 1 GOVERNOR ASSY/GX160UT2 1 WEIGHT,GOVERNOR/GX160UT2 2 HOLDER,GOVERNOR WEIGHT 1 PIN, GOVERNOR WEIGHT 2 SLIDER,GOVERNOR/GX160UT2 1 SHAFT,GOVERNOR ARM/UT2 1 BOLT, DRAIN PLUG 2 WASHER, DRAIN PLUG 2 CLIP, GOVERNOR HOLDER 1 BALL BEARING 6205TMB 1 OIL SEAL 25X41X6 1 O-RING 14MM FLANGE NUT M PLAIN WASHER 6MM LOCK PIN 8MM Z0T- 003 FLANGE BOLT 6X12 2 SWITCH ASSY.,OIL LEVEL 1

23 CRANKCASE COVER

24 CRANKCASE COVER NO. PART/NO. Parts Name Q'TY MK MK2 REMARKS Z4M ZH Z0T Z0T Z0T Z0T- 801 COVER,AY CRANKCASE/160UT2 1 GASKET CRANK CASE 1 CAP AY OIL FILLER 1 CAP ASSY OIL FILLER 1 PACKING,OIL FILLER CAP 1 OIL SEAL 25X41X KNOCK PIN 8X Z0T- 800 FLANGE BOLT 8X32 6 BALL BEARING PACKING,OIL FILLER CAP 1

25 CRANKSHAFT

26 CRANKSHAFT NO. PART/NO. Parts Name Q'TY MK MK2 REMARKS Z4M ZE1-600 CRANK SHAFT CP/160UT2QMX2 1 KEY 4.78X4.78X38 1

27 PISTON

28 PISTON NO. PART/NO. Parts Name Q'TY MK MK2 REMARKS Z4M Z4M Z4M Z4M Z4M Z4M Z4M Z0T Z4M ZE1- RING SET,PISTON(STD) 1 RING SET PISTON RING SET PISTON PISTON(STD)/GX160UT2 1 PISTON 0.25/GX160UT2 1 PISTON 0.50/GX160UT2QMXC 1 PIN,PISTON/GX200T2 1 ROD,AY CONNECTING/160UT2 1 BOLT,CONNECTING ROD6X CLIP,PISTON PIN 18MM 2

29 CAMSHAFT

30 CAMSHAFT NO. PART/NO. Parts Name Q'TY MK MK2 REMARKS Z4M Z4M Z4M ZE ZE Z4M ZE Z4M Z4M ZF Z0T Z0T Z4M ZE ZE1- SEAL,VALVE STEM/GX200T2 1 CAMSHAFT ASSY/GX160UT2 1 ROD CP,PUSH/GX160UT2 2 ARM,VALVE ROCKER 2 VALVE LIFTER 2 PIVOT,ROCKER ARM 2 SPRING,WEIGHT RETURN 1 VALVE,IN/GX160UT2 1 VALVE,EX /GX160UT2 1 SPRING,VALVE 2 RETAINER,VALVE SPRING 1 RETAINER,VALVE SPRING 1 PLATE,PUSH ROD GUIDE 1 BOLT,PIVOT,8MM/GX160 2 NUT,PIBOT ADJUSTING 2

31 RECOIL STARTER

32 RECOIL STARTER NO. PART/NO. Parts Name Q'TY MK MK2 REMARKS Z4M305Z D Z4M003Z D Z0T ZH ZH ZH ZH ZH ZH ZH ZH Z4M Z4M- 003 STARTER AY,RECOIL/160UT2 1 CASE CP,R-STARTER/160UT2 1 REEL,RECOIL STARTER 1 RATCHET,STARTER 2 PLATE,FRICTION 1 RATCHET GUIDE 1 FRICTION SPRING 1 SPRING,RECOIL STARTER 1 SPRING,RETURN 2 ROPE,RECOIL STARTER 1 SCREW,SETTING 1 FLANGE BOLT 6X8 3 KNOB,RECOIL STARTER 1 KNOB,REINFORCEMENT 1

33 FAN COVER

34 FAN COVER NO. PART/NO. Parts Name Q'TY MK MK2 REMARKS Z4MZ B Z4M Z4M ZH Z0T ZH COVER CP,FAN/GX160UT2 1 PLATE CP,SIDE(OIL ALERT) 1 SHROUD CP/GX160UT2 1 ALERT UNIT,OIL 1 SWITCH AY,E/G STOP 1 FLANGE BOLT 6X12 6 FLANGE BOLT 6X20 1 CLIP, HARNESS 1 FLANGE BOLT 6X8 1

35 CARBURETOR

36 CARBURETOR NO. PART/NO. Parts Name Q'TY MK MK2 REMARKS ZE ZE Z0S- B Z4M ZH7- W Z5T Z5T Z4M Z4M- V ZE Z4M- V Z4M ZH ZE ZH ZE ZE ZE ZE ZE ZE H GASKET SET 1 FLOAT VALVE SET 1 FLOAT SET/GX200T2 1 CHAMBER SET,FLOAT 1 SCREW SET,PILOT 1 SCREW SET,DRAIN/GX200T2 1 SCREW SET/GX200T2 1 CHOKE SET/GX200T2 1 CARBURETOR AY/GX160-QMXC 1 BE54E A SCREW, THROTTLE STOP 1 NOZZLE,MAIN/GX160UT2QMXC 1 PACKING,CUP 1 INSULATOR,CARBURETOR/GX 1 PACKING,INSULATOR 1 SPACER COMP.,CARBURETOR 1 PACKING,CARBURETOR 1 CHOKE LEVER COMP. 1 LEVER,COCK 1 PLATE,LEVER SETTING 1 SPRING,COCK LEVER 1 PACKING,FUEL COCK 1 CUP,FUEL STRAINER 1 SCREW 3X6 / GX SPRING PIN 2X ZH ZE Z5T- 901 MAIN JET #70 1 JET SET,PILOT #38 1 FILTER,CUP/GX200T2 1

37 AIR CLEANER

38 AIR CLEANER NO. PART/NO. Parts Name Q'TY MK MK2 REMARKS ZE ZE ZE ZE ZE ZE ZE ZE ZE ZE GB PACKING,ELBOW 1 CLEANER ELEMENT/GX160 1 OUTER ELEMENT/GX160 1 PACKING,CLEANER COVER 1 COVER,AIR CLEANER 1 GROMET,AIR CLEANER 1 COLLAR,AIR CLEANER 2 COLLAR(B)AIR CLEANER 1 ELBOW,COMP AIR CLEANER 1 CASE,PRE-CLEANER 1 CAP,PRE-CLEANER 1 GUIDE,PRE-CLEANER 1 PLATE,PRE-CLEANER 1 BOLT,MAD 5 NUT,TOOL BOX SETTING FLANGE NUT 6MM ZE1-841 FLANGE BOLT 6X20 1 MARK,AIR CLEANER SALES P 1

39 MUFFLER

40 MUFFLER NO. PART/NO. Parts Name Q'TY MK MK2 REMARKS Z4M ZE ZE Z0T ZE Z0T ZE ZE ZE S Z4M- V51 PROTECTOR CP,MUFFLER(STD) 1 DEFLECTOR CP 1 ARRESTER,SPARK 1 GASKET,MUFFLER/GX160UT2 1 GUIDE,MUFFLER 1 SCREW,TAPPING,4X8 2 FLANGE BOLT 6X13 1 TAPPING SCREW 5X8 4 TAPPING SCREW 4X6 1 NUT 8MM 2 MUFFLER CP/GX160UT2QMX2 1

41 FUEL TANK

42 FUEL TANK NO. PART/NO. Parts Name Q'TY MK MK2 REMARKS ZH ZE Z0T ZH RUBBER,SUPPORT(107MM) 1 JOINT,FUEL TANK 1 PACKING,FUEL FILLER CAP 1 FLANGE BOLT 6X29 1 O-RING 14MM FLANGE NUT 6MM Z4M Z4H Z4H Z4MZ B Z4M- 003 TUBE,FUEL 4.5X145(FKM) 1 CLAMP,TUBE(D8) 2 FUEL TANK CAP CP. 1 FILTER,FUEL 1 TANK CP,FUEL NH1/160UT2 1 WASHER,TANK CUSHION 2 O-RING 5.5X1.5 2

43 FLYWHEEL

44 FLYWHEEL NO. PART/NO. Parts Name Q'TY MK MK2 REMARKS ZE ZH Z4M Z0T- 800 WOODRUFF KEY 25X18 1 COOLING FAN 1 STARTER PULLEY 1 FLYWHEEL COMP/GX160UT2 1 NUT,SPECIAL 14MM 1

45 IGNITION COIL

46 IGNITION COIL NO. PART/NO. Parts Name Q'TY MK MK2 REMARKS Z0T Z0T ZE COIL AY,IGNITION/GX200T2 1 CAP ASSY,NOISE SUPPRESSOR 1 CORD,STOP SWITCH 370MM 1 FLANGE BOLT 6X25 2

47 CONTROL

48 CONTROL NO. PART/NO. Parts Name Q'TY MK MK2 REMARKS Z4M Z4M Z4M Z4M Z4M Z4M ZE ZH ZE Z4M ZE Z5T SA H A H CONTROL AY/UT2QXC9 1 ARM,GOVERNOR/GX160UT2 1 ROD,GOVERNOR/GX160UT2 1 SPRING GOVERNOR/GX160UT2 1 SPRING,THROTTLE RETURN 1 LEVER,CONTROL/GX200T2 1 LEVER SPRING 1 WASHER,CONTROL LEVER 1 HOLDER,CABLE 1 SPACER,CONTROL LEVER 1 BASE COMP,CONTROL/QXC9 1 ADJUSTING SPRING 1 SPRING,CABLE,RETURN 1 HOLDER, WIRE 1 FLANGE BOLT 6X12 2 BOLT, GOVERNOR ARM 1 LOCK NUT 6MM 1 CIR CLIP 1 SCREW 4X6 1 SCREW 5X16 1 SCREW 5X FLANGE NUT 6MM 1

49 LABEL

50 LABEL NO. PART/NO. Parts Name Q'TY MK MK2 REMARKS Z4M Z4M ZH Z4H Z4M Z0T EMBLEM(GX160) 1 MARK,CHOKE/GX160T2 1 MARK, THROTTLE INDICATION 1 MARK,OP-CAUTION(ENGLISH) 1 MARK,EX.CAUTION(ENGLISH) 1 WRENCH,SPARK PLUG 1 HANDLE, BOX WRENCH 1

Asfalt- och betongsåg MIKASA MCD-1U

Asfalt- och betongsåg MIKASA MCD-1U Reservdelskatalog Maskin & Motor EPOX Maskin AB Postadress Besöksadress Telefon e-post hemsida Version Box 6060 Landsvägen 1 08-754 71 60 info@epox.se www.epox.se 2015