Filter type FIA (½ - 12 in.) REFRIGERATION AND AIR CONDITIONING. Technical leaflet
|
|
- Camron Thompson
- 5 years ago
- Views:
Transcription
1 type FIA 5-00 (½ - 2 ) REFRIGERATION AND AIR CONDITIONING Technical leaflet
2 , type FIA 5-00 ( / 2-2 ) Contents Page Introduction Features Design Technical data Selection of filter size Material specification Connections Dimensions and weights Ordering DKRCI.PD.FN0.A2.02 / 520H09 Danfoss A/S (AC-DSL / MWA),
3 , type FIA 5-00 ( / 2-2 ) Introduction FIA filters are a range of angle-way and straightway filters which are carefully designed to give favourable flow conditions. The design makes the filter easy to install, and ensures quick filter inspection and cleaning. FIA filters are equipped with a screen mesh of stainless steel, available in sizes 00, 50, 250 and 500µ (microns*), (US 50, 00, 72, 8 mesh*). FIA filters are used ahead of automatic controls, pumps, compressors etc. for initial plant startup and where permanent filtration of the refrigerant is required. The filter reduces the risk of undesirable system breakdowns and reduces wear and tear on plant components. Features Applicable to all coon refrigerants and all non-corrosive gases/liquids. net of stainless steel mounted direct without extra gaskets means easy servicing. FIA filter housing compatible with housings belonging to other Danfoss products. A compatibility overview can be obtained from local Danfoss Sales Company Two types of filter inserts are available: - A plain insert of stainless steel - A pleated insert (DN 5-200) with extra large surface, which ensures long intervals between cleaning and low pressure drop. FIA 5-40 (½ ½ ): A special insert (50µ) can be used in combination with a standard version when cleaning a plant during coissioning. FIA (2-2 ): A large capacity filter bag (50µ) can be inserted for cleaning plant during coissioning FIA (2-2 ) can be equipped with a magnetic insert for detension of iron particles and other magnetic particles. Each filter clearly marked with type, size and performance range Housing and bonnet of low temperature steel in accordance with the requirements of the Pressure Equipment Directive and those of other international classification authorities Temperature range 60/+50 C ( 76/+02 F) Pressure range: 40 bar g (580 psi g) Classification: DNV, LR, SAQ, CRN, BV etc. To obtain an updated product certification list please contact your local Danfoss Sales Company * Mesh is the number of threads per inch. µ (microns) is the distance between two threads (µ = /000 ). Danfoss A/S (AC-DSL / MWA), DKRCI.PD.FN0.A.02 / 520H09
4 , type FIA 5-00 ( / 2-2 ) Design Connections Available with the following connections: Butt-weld DIN (2448) Butt-weld ANSI (B 6.0 Schedule 80), DN 5-40 ( / 2 - / 2 ) Butt-weld ANSI (B 6.0 Schedule 40), DN (2-2 ) Socket Weld (ANSI B 6.), DN 5 - DN 50 ( / 2-2 ) FPT Female Pipe Thread, NPT (ANSI/ASME B.20.), DN 5-2 ( / 2 - / 4 ) Insert A filter grid and filter net of stainless steel ensure long element life. The filter net offers a very high degree of cleanability. Housing The filter housing is made of special, cold resistant steel approved for low temperature application. Pressure Equipment Directive (PED) FIA filters are approved in accordance with the European standard specified in the Pressure Equipment Directive and are CE marked. For further details / restrictions - see Installation Instruction Nominal bore DN 25 ( ) DN 2-80 ( / 4 - ) DN (4-0 ) DN 00 (2 ) Classified for Fluid group I Category Article, paragraph II III IV Installation/Maintenance The filter is designed to resist high internal pressures. However, the piping system in general should be designed to avoid liquid traps and reduce the risk of hydraulic pressure caused by thermal expansion. Install the filter with the cover downwards. Danfoss recoends to replacement/cleaning of the filter when the differential pressure loss >0.5 bar (7. psi) in the liquid line and >0.05 bar (0.7 psi) in the suction line. The max. permissible differential pressure is bar (5 psi). For further information refer to installation instruction for FIA. Identification: DN 5-25 ( / 2 - ) DN 2-00 ( / 4-2 ) Technical data Refrigerants Applicable to all coon refrigerants including flaable refrigerants and all non-corrosive gases/liquids. For further information please see installation instruction for FIA. Temperature range 60 C/+50 C ( 76 F/+02 F). Pressure range The filters are designed for max. working pressure 40 bar g (580 psi g). 4 DKRCI.PD.FN0.A2.02 / 520H09 Danfoss A/S (AC-DSL / MWA),
5 , type FIA 5-00 ( / 2-2 ) Selection of filter size The nesh aperture size of the filter must satisfy the requirements stated by the suppliers of the equipment to be protected. The following recoendations of aperture size apply in general to refrigeration installations: All lines First start up:... 50µ (Use filter element with removable insert for FIA DN5-40 or separate filter bag for FIA DN µ insert should normally be removed after the first 24 hours of operation) Definition Mesh is the number of threads per inch. µ (microns) is the distance between two threads (µ = /000 ). Liquid Lines Ahead of pumps: µ After pumps:... 50µ In front of AKVA valves... 00µ Protection of automatic regulation equipment Generally... 50µ Sensitive equipment, e.g. suction regulators with low temperature µ Suction Lines Ahead of screw compressor µ Ahead of piston compressor... 50µ [8 mesh] [00 mesh] / 250µ [72 mesh] [50 mesh] [00 mesh] / 250µ [72 mesh] [72 mesh] [72 mesh] [00 mesh] Flow coefficient (DIN/ANSI) µ mesh wire FIA 5-20 ( / 2 - / 4 ) ( - / 2 ) 50 (2 ) 65 (2 / 2 ) 80 ( ) 00 (4 ) 25 (5 ) 50 (6 ) 200 (8 ) 250 (0") 00 (2") wire free space % screen area cm 2 screen area in Danfoss A/S (AC-DSL / MWA), DKRCI.PD.FN0.A.02 / 520H09 5
6 , type FIA 5-00 ( / 2-2 ) Selection of filter size (Continued) K v values DN FIA angle - plain filter net FIA angle - pleated filter net µ00 µ50 µ250 µ500 µ50 µ250 µ DN FIA straight - plain filter net FIA straight- pleated filter net µ00 µ50 µ250 µ500 µ50 µ250 µ DKRCI.PD.FN0.A2.02 / 520H09 Danfoss A/S (AC-DSL / MWA),
7 , type FIA 5-00 ( / 2-2 ) Material specification FIA 5-65 ( / 2 " - 2 / 2 ") FIA (" - 8") FIA (0" - 2") FIA 5-65 ( / 2-2 / 2 ) No. Part Material DIN ISO ASTM Housing Steel G20Mn5QT, P285QH+QT, Gasket Fibre, Non-asbestos Cover Steel P275NL EN Bolts Stainless steel A2-70 A2-70 Type 08 5 Marking label Aluminium 6 element Stainless steel FIA ( - 2 ) No. Part Material DIN ISO ASTM Housing Steel G20Mn5QT, P285QH+QT, Gasket Fibre, Non-asbestos Cover Steel P275NL EN Bolts Stainless steel A2-70 A2-70 Type 08 5 Marking label Aluminium 6 element Stainless steel 7* Pressure relief (screw) Stainless steel 8* Packing washer Aluminium * pos 7 and 8 used in FIA LCC, A LF2, A50 LCC, A LF2, A50 Danfoss A/S (AC-DSL / MWA), DKRCI.PD.FN0.A.02 / 520H09 7
8 , type FIA 5-00 ( / 2-2 ) Connections OD T OD T Butt-weld DIN (2448) 5 20 / 2 2. / DIN / 4 / / OD T OD T Butt-weld ANSI (B 6.0 Schedule 80) ANSI 5 20 / 2 2. / / 4 / Butt-weld ANSI (B 6.0 Schedule 40) / SOC ID T ID T L L Socket welding ANSI (B 6.) / / / 4 / FPT Inside pipe thread FPT inside pipe thread, NPT (ANSI/ASME B.20.) / 2 ( / 2 4 NPT) / 4 ( / 4 4 NPT) / 4 (.5 NPT) ( / 4.5 NPT) 8 DKRCI.PD.FN0.A2.02 / 520H09 Danfoss A/S (AC-DSL / MWA),
9 , type FIA 5-00 ( / 2-2 ) Dimensions and weights FIA 5-65 Angle-way Straight-way Angle-way size A C H F m Weight FIA kg ( / 2 - / 4 ) lbs FIA kg ( - / 2 ) lbs FIA kg (2 ) lbs FIA kg (2 / 2 ) lbs Straight-way Valve size A C C m H E F m Weight FIA kg ( / 2 - / 4 ) lbs FIA kg ( - / 2 ) lbs FIA kg (2 ) lbs FIA kg (2 / 2 ) lbs Danfoss A/S (AC-DSL / MWA), DKRCI.PD.FN0.A.02 / 520H09 9
10 , type FIA 5-00 ( / 2-2 ) Dimensions and weights FIA Angle-way Straight-way Angle-way size A C H F m Weight FIA kg ( ) lbs FIA kg (4 ) lbs FIA kg (5 ) lbs FIA kg (6 ) lbs FIA kg (8 ) lbs FIA (0 ) FIA (2 ) Straight-way size A C C m H E F m Weight FIA kg ( ) lbs FIA kg (4 ) lbs FIA kg (5 ) lbs FIA kg (6 ) lbs FIA kg (8 ) lbs 0 DKRCI.PD.FN0.A2.02 / 520H09 Danfoss A/S (AC-DSL / MWA),
11 , type FIA 5-00 ( / 2-2 ) Ordering The table below is used to identify the filter required. Please note that you have to order FIA filter housing, a filter element and accessories. Example: FIA 50 D ANG + FIA-X 50 50µ + Bag = 48H H0 + 48H50 Type Without 5 ½ FIA 5 D ANG 48H05 5 ½ FIA 5 A ANG 48H06 5 ½ FIA 5 SOC ANG 48H075 5 ½ FIA 5 FPT ANG 48H08 5 ½ FIA 5 D STR 48H085 5 ½ FIA 5 A STR 48H097 5 ½ FIA 5 SOC STR 48H09 5 ½ FIA 5 FPT STR 48H5 20 ¾ FIA 20 D ANG 48H ¾ FIA 20 A ANG 48H ¾ FIA 20 FPT ANG 48H ¾ FIA 20 SOC ANG 48H ¾ FIA 20 D STR 48H ¾ FIA 20 A STR 48H ¾ FIA 20 FPT STR 48H6 20 ¾ FIA 20 SOC STR 48H0 25 FIA 25 D ANG 48H05 25 FIA 25 A ANG 48H FIA 25 FPT ANG 48H08 25 FIA 25 SOC ANG 48H FIA 25 D STR 48H FIA 25 A STR 48H FIA 25 FPT STR 48H7 25 FIA 25 SOC STR 48H 2 ¼ FIA 2 D ANG 48H054 2 ¼ FIA 2 A ANG 48H066 2 ¼ FIA 2 FPT ANG 48H084 2 ¼ FIA 2 SOC ANG 48H078 2 ¼ FIA 2 D STR 48H088 2 ¼ FIA 2 A STR 48H00 2 ¼ FIA 2 FPT STR 48H8 2 ¼ FIA 2 SOC STR 48H2 40 ½ FIA 40 D ANG 48H ½ FIA 40 A ANG 48H ½ FIA 40 SOC ANG 48H ½ FIA 40 D STR 48H ½ FIA 40 A STR 48H0 40 ½ FIA 40 SOC STR 48H 50 2 FIA 50 D ANG 48H FIA 50 A ANG 48H FIA 50 SOC ANG 48H FIA 50 D STR 48H FIA 50 A STR 48H FIA 50 SOC STR 48H4 00µ 50 mesh 50µ 00 mesh 250µ 72 mesh Code number 500µ 8 mesh Pleated filter element 50µ 00 mesh Pleated filter element 250µ 72 mesh Pleated filter element 500µ 8 mesh 48H22 48H24 48H26 48H28 48H H22 48H24 48H26 48H28 48H H2 48H25 48H27 48H29 48H04 48H269-48H2 48H25 48H27 48H29 48H04 48H269-48H2 48H25 48H27 48H29 48H04 48H269-48H57 48H0 48H8 48H44 48H79 48H84 48H89 D A SOC FPT = Butt-weld DIN = Butt-weld ANSI = Socket welding = Inside pipe thread ANG = Angle-way STR = Straight-way Danfoss A/S (AC-DSL / MWA), DKRCI.PD.FN0.A.02 / 520H09
12 , type FIA 5-00 ( / 2-2 ) Ordering Type Without 65 2½ FIA 65 D ANG 48H ½ FIA 65 A ANG 48H ½ FIA 65 D STR 48H ½ FIA 65 A STR 48H0 80 FIA 80 D ANG 48H FIA 80 A ANG 48H FIA 80 D STR 48H FIA 80 A STR 48H FIA 00 D ANG 48H FIA 00 A ANG 48H FIA 00 D STR 48H FIA 00 A STR 48H FIA 25 D ANG 48H FIA 25 A ANG 48H FIA 25 D STR 48H FIA 25 A STR 48H FIA 50 D ANG 48H FIA 50 A ANG 48H FIA 50 D STR 48H FIA 50 A STR 48H FIA 200 D ANG 48H FIA 200 A ANG 48H FIA 200 D STR 48H FIA 200 A STR 48H FIA 250 D ANG 48H FIA 250 A ANG 48H7 50µ 00 mesh 250µ 72 mesh Code number 500µ 8 mesh Pleated filter element 50µ 00 mesh Pleated filter element 250µ 72 mesh Pleated filter element 500µ 8 mesh 48H 48H9 48H45 48H80 48H85 48H90 48H9 48H20 48H2 48H8 48H86 48H9 48H2 48H40 48H46 48H82 48H87 48H92 48H 48H4 48H47 48H8 48H88 48H9 48H4 48H42 48H48 48H H5 48H4 48H H6 48H75 48H D A 00 2 FIA 00 D ANG 48H FIA 00 A ANG 48H74 = Butt-weld DIN = Butt-weld ANSI ANG = Angle-way STR = Straight-way 48H7 48H76 48H Accessories Part Accessory for Code number FIA Magnet insert FIA Part Accessory for Code number element µ50 with removable element µ50 for the first start up FIA 5-20 FIA H0 48H02 Part Accessory for Code number FIA 50 48H50 FIA 65 48H5 FIA 80 48H52 bag FIA 00 48H5 FIA 25 48H54 FIA 50 48H55 FIA H56 Part Accessory for Code number Purge valve complete, blind nut and gasket FIA DKRCI.PD.FN0.A2.02 / 520H09 Danfoss A/S (AC-DSL / MWA),
Filter type FIA (½ - 12 in.) type FIA-SS (½ - 2½ in.) REFRIGERATION AND AIR CONDITIONING. Technical leaflet
type FIA 5-00 (½ - 2 ) type FIA-SS 5-65 (½ - 2½ ) REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................
More informationFilter FIA and FIA-SS
MAKING MODERN LIVING POSSIBLE Technical brochure FIA and FIA-SS FIA filters are a range of angle-way and straight-way filters which are carefully designed to give favourable flow conditions. The design
More informationStrainers in stainless steel Type FIA SS
Data sheet Strainers in stainless steel Type FIA SS In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations, there is a need for high surface protection
More informationSVL product range with butt-weld connection F
Data sheet SVL product range with butt-weld connection F The new range of products for Industrial Refrigeration - SVL is based on the successful modular platform concept from the ICF and ICV valves. The
More informationShut-off valves Types SVA-S and SVA-L
Data sheet Shut-off valves Types SVA-S and SVA-L SVA shut-off valves are available in angleway and straightway versions and with Standard neck (SVA-S) and Long neck (SVA-L) The shut-off valves are designed
More informationSVL parts program 65 bar (943 psi) series
Data sheet SVL parts program 65 bar (943 psi) series The new 65 bar SVL range for Industrial Refrigeration is based on the successful modular Standard SVL platform. The same flexibility, simplicity and
More informationStop check valves type SCA , SCA-SS Check valves type CHV , CHV-SS Technical leaflet REFRIGERATION AND AIR CONDITIONING
Stop check valves type SCA 15-125, SCA-SS 15-40 Check valves type CHV 15-125, CHV-SS 15-40 REFRIGERATION AND AIR CONDITIONING Technical leaflet Content Page Introduction.......................................................................................
More informationPressure control valve Type KDC
Data sheet Pressure control valve Type KDC 65-00 The KDC valve is a pressure control valve. The valve controls the discharge pressure of the compressor to ensure fast build-up of pressure and lubrication
More informationStop valves SVA-S and SVA-L
MAKING MERN LIVING POSSIBLE echnical brochure Stop valves SVA-S and SVA-L SVA Stop Valves are available in angleway and straightway versions and with Standard neck (SVA-S) and Long neck (SVA-L) he stop
More informationStop check valves type SCA Check valves type CHV Technical leaflet REFRIGERATION AND AIR CONDITIONING
Stop check valves type SCA 15-125 Check valves type CHV 15-125 REFRIGERATION AND AIR CONDITIONING Technical leaflet Content Page Introduction.......................................................................................
More informationStop valves SVA-S and SVA-L
MAKING MODERN LIVING POSSIBLE echnical brochure Stop valves SVA-S and SVA-L SVA Stop Valves are available in angleway and straightway versions and with Standard neck (SVA-S) and Long neck (SVA-L) he stop
More informationShut-off Check valves and regulating valves for for Industrial Refrigeration
Catalogue Shut-off Check valves and regulating valves for for Industrial Refrigeration Contents Page Check & stop valves, type SCA-X - Check valve, type CHV-X, 52 bar (754 psi)... 3 Check & stop valves,
More informationCheck & stop valve, SCA-X Check valve, CHV-X
Data sheet Check & stop valve, SCA-X Check valve, CHV-X SCA-X are check valves with a built-in shut-off valve function. CHV-X are check valves only. SCA-X/CHV-X are available in angleway versions. The
More informationStop check valves, SCA-X Check valves, CHV-X
MAKING MODERN LIVING POSSIBLE Technical brochure Stop check valves, SCA-X Check valves, CHV-X SCA-X are check valves with a built-in stop valve function. CHV-X are check valves only. SCA-X/CHV-X are available
More informationShut-off Check valves and regulating valves for for Industrial Refrigeration
Catalogue Shut-off Check valves and regulating valves for for Industrial Refrigeration Contents Page Check & stop valves, type SCA-X - Check valve, type CHV-X...3 Check & stop valves in stainless steel,
More informationShut-off valves Types SVA-DL and SVA-DH
Data sheet Shut-off valves Types SVA-DL and SVA-DH 250-300 SVA-DL and SVA-DH are angleway shut-off valves designed to meet all industrial refrigeration application requirements. SVA-DL (Delta pressure
More informationFA + solenoid valve Type ICF 15/20 EVRAT
Data sheet FA + solenoid valve Type ICF 15/20 EVRAT Based on advanced technology the ICF EVRAT retrofit valve incorporates three functions in one housing, which can replace the widely used direct coupled
More informationShut-off valves in stainless steel Types SVA-S SS and SVA-L SS
Data sheet Shut-off valves in stainless steel s SVA-S SS and SVA-L SS In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations, there is a need for
More informationPilot-operated servo valve Type ICS
Data sheet Pilot-operated servo valve ICS ICS pilot-operated servo valves belong to the ICV (Industrial Control Valve) family. The valve comprises three main components: valve body, function module and
More informationShut-off valves in stainless steel SVA-S SS
Technical brochure Shut-off valves in stainless steel In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations, there is a need for high surface protection
More informationPilot-operated servo valve Type ICS
Data sheet Pilot-operated servo valve Type ICS The valve comprises three main components: valve body, function module and top cover. ICS pilot-operated servo valves are pilot operated valves for regulating
More informationStop valves SVA-DL & SVA-DH
MAKING MODERN LIVING POSSIBLE Technical brochure Stop valves SVA-DL & SVA-DH 250-300 SVA-DL and SVA-DH are angleway stop valves designed to meet all industrial refrigeration application requirements. SVA-DL
More informationPilot operated main valves for regulating pressure and temperature, type PM
MAKING MODERN LIVING POSSIBLE Technical brochure Pilot operated main valves for regulating pressure and temperature, type PM PM valves are pilot operated main valves for regulating pressure and temperature
More informationGauge valves Type SNV-ST and SNV-SS
Data sheet Gauge valves Type and SNV-SS and SNV-SS valves are designed to meet all industrial refrigeration application requirements. Designed as service valves they provide favourable flow characteristics.
More informationFloat valve Type HFI. Data sheet
Data sheet Float valve ype is a high pressure float valve with internal liquid measuring device. he float valve is designed for direct flange mounting or welding on to plate heat exchanger type condensers,
More informationPilot-operated servo valve Type ICS
Data sheet Pilot-operated servo valve Type ICS ICS pilot-operated servo valves belong to the ICV (Industrial Control Valve) family. The valve comprises three main components: valve body, function module
More informationPilot Controlled Servo Valves ICS
MAKING MODERN LIVING POSSIBLE Technical brochure Pilot Controlled Servo Valves ICS ICS servo valves belong to the ICV (Industrial Control Valve) family and are one of two product groups. ICV types ICS
More informationPilot controlled servo valves Type ICS - Solenoid Valves Pressure Regulating Valves. Technical leaflet MAKING MODERN LIVING POSSIBLE
MAKING MODERN LIVING POSSIBLE Pilot controlled servo valves Type ICS - Solenoid Valves Pressure Regulating Valves REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction...3 Features...3
More informationLiquid level switch Type AKS 38
Data sheet Liquid level switch Type AKS 38 AKS 38 is an electro-mechanical liquid level switch designed to provide a reliable, electromechanical response to liquid level changes. The simple and basic design
More informationTemperature regulating valve Type ORV
Data sheet Temperature regulatg valve Type ORV ORV are 3-way dustrial valves for matag a constant oil temperature gas compressor systems, by mixg hot and cold oil the lubricatg system of e.g. screw or
More informationRefrigeration and Air Conditioning Controls. Technical leaflet. Stop valves type SVA 6-10 REFRIGERATION AND AIR CONDITIONING
Refrigeration and Air Conditioning Controls Technical leaflet Stop valves type SVA 6-10 REFRIGERATION AND AIR CONDITIONING Contents Page Introduction... 3 Features... 3 Design... 4 Technical data... 4
More informationHigh pressure float valve, type HFI REFRIGERATION AND AIR CONDITIONING. Technical leaflet
High pressure float valve, type HFI REFRIGERAION AND AIR CONDIIONING echnical leaflet Contents Page Introduction........................................................................................3
More informationStop Needle Valves SNV-ST and SNV-SS
MAKING MODERN LIVING POSSIBLE Technical brochure Stop Needle Valves and SNV-SS www.danfoss.com/ir Stop Needle Valve, type and SNV-SS Contents Page Introduction........................................................................................
More informationValve Station in stainless steel ICF SS 20 and ICF SS 25
Data sheet Valve Station in stainless steel ICF SS 20 and ICF SS 25 Based on advanced technology the ICF SS valve station incorporates several functions in one housing, which can replace a series of conventional
More informationSolenoid valves type EVRA 3 to 40 and EVRAT 10 to 20
Solenoid valves type EVRA 3 to 40 and EVRAT 10 to 20 Contents Page Approval...569 Technical data...569 Ordering...570 Rated capacity...573 Capacity...573 Design / Function...577 Material specification............................................................................
More informationMotor Valves type ICM Actuators type ICAD 600,900, 1200 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Motor Valves type ICM -1 Actuators type ICAD 600,900, 10 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction...3 The ICM Concept...4 Features (valve)...6 Design (valve)...6
More informationMotor operated valves and Actuators Type ICM and ICAD
Data sheet Motor operated valves and Actuators ICM and ICAD ICM motor operated valves belong to the ICV family and are one of two product groups. ICV types ICS - Pilot operated servo valve ICM - Motor
More informationFloat Switch AKS 38. Technical brochure MAKING MODERN LIVING POSSIBLE
MAKING MODERN LIVING POSSIBLE Technical brochure Float Switch AKS 38 AKS 38 is an electro-mechanical float switch designed to provide a reliable, electromechanical response to liquid level changes. The
More informationMotor operated valves and Actuators ICM and ICAD 600A-1200A
Technical brochure Motor operated valves and Actuators ICM -1 and ICAD 600A-10A ICM motor operated valves belong to the ICV family and are one of two product groups. ICV types ICS - Pilot operated servo
More informationLiquid level control. Thermostatic liquid level regulators, type TEVA. High pressure float valve, type HFI
Liquid level control Contents Page Thermostatic liquid level regulators, type TEVA Introduction... 7 Materials... 7 Technical data... 7 Ordering... 8 Identification... 8 Capacity... 9 Design/Function...
More informationSolenoid valves, type EVRA 3 40 and EVRAT REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Solenoid valves, type 40 and EVRAT 10 20 REFRIGERATION AND AIR CONDITIONING Technical leaflet Technical leaflet Solenoid valves type to 40 and EVRAT 10 to 20 Contents Page Introduction... 3 Approvals...
More informationPilot valves for servo opereated main valves REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Pilot valves for servo opereated main valves REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3
More informationElectric expansion valves Types AKVA 10, 15 & 20
Data sheet Electric expansion valves Types AKVA 10, 15 & 20 AKVA are electric expansion valves designed for ammonia refrigerating plant. The AKVA valves are normally controlled by a controller from Danfoss
More informationPilot valves Types CVP, CVPP, CVC, CVE, EVM and CVH
Data sheet Pilot valves Types CVP, CVPP, CVC, CVE, EVM and CVH Pilot valves for direct mounting in main valves Pilot valves are intended for mechanical control of a main valve and are ready for direct
More informationCapacity regulators (hot gas bypass) PMC and CVC
MAKING MODERN LIVING POSSIBLE Technical brochure Capacity regulators (hot gas bypass) PMC and CVC The PMC and CVC is used for capacity regulation in refrigeration, freezing and air conditioning plant for
More informationValve station ICF 15, ICF EVRAT, ICF 20, ICF SS 20
ICF 5, ICF EVRAT, ICF 0, ICF SS 0 a 4 5 5b 6 7 8 9 4 Stop, Check, Stop/check and Regulating valve module ICFS 5 Stop valve module 48B576 ICFS 0 Stop valve module 07L50 ICFS SS 0 Stop valve module 07L477
More informationValve station ICF 15, ICF EVRAT, ICF 20, ICF SS 20
ICF 5, ICF EVRAT, ICF 0, ICF SS 0 a 4 5 5b 6 7 8 9 4 Stop, Check, Stop/check and Regulating valve module ICFS 5 Stop valve module 48B576 ICFS 0 Stop valve module 07L50 ICFS SS 0 Stop valve module 07L477
More informationPilot valves for servo operated main valves
MAKING MODERN LIVING POSSIBLE Technical brochure Pilot valves for servo operated main valves www.danfoss.com/ir Contents Page Introduction........................................................................................3
More informationModulating liquid level regulators, direct-controlled SV 1 and SV 3
MAKING MODERN LIVING POSSIBLE Technical brochure Modulating liquid level regulators, direct-controlled SV 1 and SV 3 The SV 1 and 3 can be used separately as a modulating liquid level regulator in refrigerating,
More informationStrainer PN 25/40 DN
Type series booklet 7127.1/9-10 NORI 40 Strainer with drain plug flanged or with butt weld ends Type FSL Type FSS PN 25/40 DN 15-300 Fields of Application In heat transfer plants, industrial plants, building
More informationSolenoid valves EVRA and EVRAT
Data sheet Solenoid valves EVRA and EVRAT EVRA is a direct or servo operated solenoid valve for liquid, suction and hot gas lines with ammonia or fluorinated refrigerants. EVRA valves are supplied complete
More informationPilot valves for servo operated main valves
MAKING MODERN LIVING POSSIBLE Technical brochure Pilot valves for servo operated main valves Pilot valves for direct mounting in main valves The range of pilot valves consists of: Constant-pressure pilot
More informationValves For Cryogenic Applications
Valves For Cryogenic Applications Red Dragon has been supplying specialist valve products to all industries for over 20 years and we are proud of our reputation for service, quality and speed of delivery.
More information10.1 Introduction Connections Overview
Content 10.1 Introduction...10.1-1 10.2 Connections Overview...10.2-1 10.2.1 Pressure/Temperature Rating of Connection versus Safety Valve...10.2-1 10.2.2 Flanged Connections...10.2-1 10.2.3 Threaded Connections...10.2-2
More informationT EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve
T 8097-3 EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN 6 to NPS ¼
More informationECOLINE GTC Type Series Booklet
Gate Valve ECOLINE GTC 150-600 Class 150-600 NPS 2''-36'' Cast Steel / Stainless Steel Bolted Bonnet Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet ECOLINE GTC 150-600
More informationSeries 2000 Top Guided Control Valve
Series 2000 Top Guided Control Valve Series 2000 Control Valve Series 2000 process Control Valves. Sturdy design with special service trims available for: Cavitation Control Noise Reduction Top entry construction
More informationINTRODUCTION AND STANDARD SPECIFICATIONS
INTRODUCTION AND STANDARD SPECIFICATIONS INTRODUCTION Instrument valves and manifolds are often used on general applications for liquid and gas service and are suitable for shutting-off impulse lines to
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve
Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design
More informationPressure: Max working 110 bar (1600 psi) (acc. to NFPA T ) Burst 330 bar (4800 psi) (acc. to NFPA T ) Wire mesh µm
HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working 110 bar (1600 psi) (acc. to NFPA T 3.10.5.1) Burst 330 bar (4800 psi) (acc. to NFPA T 3.10.5.1) Housing
More informationConnection Ports: 3/4 1 1/4 BSP (other thread options on request) aluminium alloy NBR (FKM on request)
HYDRAULIC FILTRATION F4-DMD series In line medium pressure filters Technical Information Pressure: Max working (acc. to NFPA T 3.1..1): F4-DMD/8/11: 7 bar (11 psi) F4-DMD1/3/4: 4 bar (8 psi) Housing Burst
More informationCE43 1" (DN25) to 4" (DN100) Carbon Steel Cage Design, Two Port Control Valves
Globe 13 CE43 1" (DN25) to 4" (DN) Carbon Steel Cage Design, Two Port Description The CE43 series is a range of carbon steel two port, cage trim, control valves conforming to ANSI B16.34, ASME VIII standards
More informationShut-off valves SVA-DH, SVA-DL
Installation Guide Shut-off valves SVA-DH, SVA-DL 250-300 148R9510 Installation 148R9510 SVA-DH SVA-DL Fig. 1 Fig. 2 Fig. 3 Fig. 4 Nm LB-feet DN 250-300 370 272 Fig. 5a Fig. 5b Danfoss A/S (MWA), 2015-01
More informationSITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices Metering pipe with orifice plate and annular chambers 4/369
and annular chambers Application Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -10 to +00 C. Design Orifice plate with annular chambers consisting
More informationInline Filter RFL. Cast version Volume rates up to 1300 l/min* Pressure range 25/40 bar
RFL inline filters are designed for inline mounting in hydraulic and lubrication systems. Inline Filter RFL Cast version Volume rates up to 1300 l/min* Pressure range 25/40 bar * For larger flow rates,
More informationPressure: Max working 8 bar (116 psi) (acc. to NFPA T ) Burst 16 bar (232 psi) (acc. to NFPA T ) Buna-N (FKM on request)
HYDRAULIC FILTRATION Return filters, tank top mounting, inside-to-outside filtration Technical Information Pressure: Max working 8 bar (116 psi) (acc. to NFPA T 3.10.5.1) Burst 16 bar (232 psi) (acc. to
More informationSeries TD. Type TDL Type TDM. Automatic Recirculation Valve for pump protection
Series TD Type TDL Type TDM Automatic Recirculation Valve for pump protection Series TD The SCHROEDAHL Automatic Recirculation Valve is used as a pump protection system for centrifugal pumps Preamble SCHROEDAHL
More informationRAIMONDI. High pressure forged check valves recommended to prevent flow reversal in severe applications.
Fig. 6042 6045 RAIMONDI High pressure forged check valves recommended to prevent flow reversal in severe applications. Features High quality forged materials to guarantee pressure envelope integrity, all
More informationPF6 Stainless Steel Piston Actuated On/ Off Valves
Page of TI-P7- CH Issue Cert. No. LRQ 9 ISO 9 PF Stainless Steel Piston Actuated On/ Off Valves Description A -port pneumatically actuated on / off stainless steel valve for use on steam, water, air, oil
More informationReplaceable solid cores filter driers type CSR
Replaceable solid cores filter driers type CSR N of cores Nominal volume [cm 3 ] (in 3 ) DIMENSIONS AND TECHNICAL CHARACTERISTICS Filtering surface ODS Ø [in.] [mm] ØD1 ØD2 H1 P E H K CSR485 5/8" 16 148
More informationTechnical brochure Eliminator filter drier DCR - with replaceable solid core
MAKING MODERN LIVING POSSIBLE Technical brochure Eliminator filter drier DCR - with replaceable solid core www.danfoss.com Contents Page Introduction...3 Features...3 Approvals...3 Technical data...4 of
More informationFlowCon SH mm. Adjustable Dynamic Self Balancing Valve SPECIFICATIONS
FlowCon SH 50-150mm Adjustable Dynamic Self Balancing Valve SPECIFICATIONS Pressure rating: 4000 kpa / 580 psi Temperature rating, media: -20 C to +120 C / -4 F to +248 F Material: - Diaphragm: Hydrogenated
More informationTECHNICAL SPECIFICATION CLIENT : MCM
TECHNICAL SPECIFICATION CLIENT : MCM A SPECIFICATION NO.: TSGT0951 Rev A As Built WO 100048 DESCRIPTION : 5 x 24 500 LITRE 25,0/27,5 BAR UN PORTABLE TANK Serial Number : MCMU 527021 to MCMU 527025 1.0
More informationSTERI-TROL Clean Service 'S' series Two-port and Three-port Control Valves - DN15 (½") to DN100 (4")
Page 1 of 17 Cert. No. LRQ 09608 ISO 9001 STERI-TROL Clean Service 'S' series Two-port and Three-port Control Valves - DN15 (½") to DN100 (4") TI-P183-02 CH Issue 3 Description STERI-TROL 'S' series are
More informationFiltrec elements are tested according to ISO 2941, ISO 2942 and ISO 23181
Common HYDRAULIC FILTRATION Side wall mounting suction filters Technical Information Connection Ports: 1-1 1/4-1 1/2 BSP (other thread options on request) 1 1/2 SAE J518-3000/M12 Housing Materials: Cover:
More informationParker Weld-in Valve Stations
Parker Weld-in Valve Stations Product Bulletin 0-0 Type: SVS, SST Purpose: The SVS and SST provide safe and economical solutions for small capacity lines. These products feature a weld-in construction
More informationIBV Series C-LF2 Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationRosemount 1195 Integral Orifice Primary Element
September 2014 Rosemount DP Flow Rosemount 1195 Integral Orifice Primary Element Rosemount 1195 Integral Orifice Primary Element utilizes a self centering orifice plate design to eliminate installation
More informationCATALOG. Actuated Diaphragm Valve DN PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL.
CATALOG Actuated Diaphragm Valve DN 15-100 PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL. TABLE OF CONTENTS Type 186 - DN 12-15 (MA 10) 04 General information - Technical specification 04 Sectional
More informationConnection Ports: 1/2 1 1/2 BSP (other thread options on request) aluminium alloy NBR (FKM on request)
HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working (acc. to NFPA T 3.1.5.1): F1-XD4/63/1: 1 bar (15 psi) F1-XD16/25/4: 8 bar (12 psi) Housing Burst (acc. to
More informationBy-pass: 1,7 bar (24.6 psi) setting N.B. Cartridge with integrated bypass valve and antidrainback membrane
HYDRAULIC FILTRATION Spin-on, tank top return filters Technical Information Pressure: Max working 12 bar (175 psi) (acc. to NFPA T 3.10.17) Burst 20 bar (290 psi) (acc. to NFPA T 3.10.17) Connection Ports:
More informationVisual Level Indicators (VLI) Economy Line 6
Visual Level Indicators (VLI) -1- Series Type Material Pipe Viscosity Operating Operating Page O.D. x s (mm) Pressure Temperature 34000E-A 316/316L 33.7*2.0 < 150 cst max. 6bar @ 20 C -40 100 C 2 34000E-K
More informationPressure: Max working F280 D12x port size 1/2 & 3/4 : 420 bar (6000 psi) Burst F280 D12x port size 1/2 & 3/4 : 1260 bar (18000 psi)
HYDRAULIC FILTRATION F8-D1 series In line medium pressure filters Technical Information Housing Pressure: Max working F8 D1x port size 1/ & 3/4 : 4 bar (6 psi) F8 D1x port size 1 : 3 bar (4 psi) F8 D14x:
More information736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR
736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR VALVE FEATURES The 736 XS-746 XS is a 3 pieces full bore ball valve for industrial fluids, especially made to be easily actuated and to offer a good and long
More informationMaintenance-free metallic seat shut-off globe valves
Type leaflet 7150.1/5-10 BOA R -H Maintenance-free metallic seat shut-off globe valves with bellows flanged to new European standard 1092-2 type 21 Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16
More informationQuality, Safety and Environment
Quality, Safety and Environment Global Valve Center B.V. is an independent, internationally operating, modern, flexible and service-oriented organization with over forty years of experience and expertise
More informationPressure: Max working 280 bar (4000 psi) (acc. to NFPA T ) Burst 840 bar (12200 psi) (acc. to NFPA T )
HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working 280 bar (4000 psi) (acc. to NFPA T 3.10.5.1) Burst 840 bar (12200 psi) (acc. to NFPA T 3.10.5.1) Housing
More informationSERVICE PARTS LIST for
T-295PL Manual SERVICE PARTS LIST for MODEL GR-60 (N.A.O.) Rooftop Air Conditioning Unit T-295PL REV. 06/202 202 Mobile Climate Control TABLE OF CONTENTS PARAGRAPH NUMBER Page INTRODUCTION... i MODEL CHART...
More informationPV4 and PV6 Piston Valves
Description The and are piston isolation valves that have been designed for use on steam, condensate and other liquid sytems. Available types: and Piston ¾" shown Screwed, butt weld and socket weld connections
More information10.3 Flanged Connections acc. to EN 1092
10.3 Flanged Connections acc. to EN 1092 EN 1092 is split into two sections: - EN 1092-1 edition 09-2008 for steel flanges - EN 1092-2 edition 06-1997 for cast iron flanges EN 1092 contains dimensions
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve
Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design
More informationConnection Ports: 3/4 1 1/4 BSP (other thread options on request)
HYDRAULIC FILTRATION Medium pressure, in line spin-on filters Technical Information Pressure: Max working (acc. to NFPA T 3.10.17): FA-4-1x: 34,5 bar (500 psi) FA-4-21: 24 bar (348 psi) Burst (acc. to
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP or NPT, Socket or Butt Welding -20 C + 180 C Max Pressure : 63 Bars up to DN20 Specifications : Anti blow-out stem Locking
More informationHANDBOOK SOLENOID VALVES. Ed SOLENOID VALVES VS-ED 01/ ENG 1
HANDBOOK Ed. 2017 1 CHAPTER 5 NORMALLY-CLOSED FOR REFRIGERATION PLANTS THAT USE HC REFRIGERANTS APPLICATION The solenoid valves illustrated in this chapter have been developed by Castel for all those refrigeration
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Carbon or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP or NPT, Socket or Butt Welding -20 C + 180 C Max Pressure : 63 Bars up to DN20 Specifications : Anti blow-out stem Locking
More informationVACUUM HOSES AND VALVES
VACUUM HOSES AND VALVES RANGE Name Description Max. use T C SK2VV232-1 Standard vacuum hose 232 C SK2VV232-2 Standard vacuum hose assemblies 232 C SK2VV232-3 QRC socket connector 232 C SK2VV232-4 QRC plug
More informationSeries TD. Type TDL Type TDM. Automatic Recirculation Valve for pump protection
Series TD Type TDL Type TDM Automatic Recirculation Valve for pump protection Series TD The SCHROEDAHL Automatic Recirculation Valve is used for the pump protection of centrifugal pumps Preamble SCHROEDAHL
More informationMaintenance-free metal-seated globe valves. Grey cast iron PN 16 DN Nodular cast iron PN 16 DN Nodular cast iron PN 25 DN
Type Series Booklet 7150.1/9-10 BOA -H Maintenance-free metal-seated globe valves with bellows Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16 DN 15-350 Nodular cast iron PN 25 DN 15-150 Applications
More informationSingle Seated Globe Control Valves
Product 1: Top Guided Single Seated Control Valves Type: Globe Size: 1-1/2'', 2'', 2-1/2'', 3'', 4'', 6''and 8 (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN64, JIS10K~JIS40K) Body Material:
More information[You may download this article at: https://fluidsys.org/downloads/ ]
Fluidsys Training Centre, Bangalore offers an extensive range of skill-based and industry-relevant courses in the field of Pneumatics and Hydraulics. For more details, please visit the website: https://fluidsys.org
More information