DVL. DuraBlack. Double-wall interior close clearance stovepipe for connecting woodstoves to chimney. ULC S641.

Transcription

1 DVL Double-wall interior close clearance stovepipe for connecting woodstoves to chimney. UL S641. Duralack Single-wall interior stovepipe for connecting woodstoves to chimney.

2 Specifications DVL pplications Double-wall interior stovepipe for connecting wood stoves to manufactured chimney. Materials and onstruction.016 stainless steel inner wall..018 galvanized outer, painted black. learances 6 clearance to walls. 8 clearance to ceilings, including cathedral ceilings. Diameters 6-8 Listings c-ul-us listed to UL S641 (MH14089). Duralack pplications Single-wall interior stovepipe for connecting wood stoves to manufactured chimney. Single- and Double-Wall Stovepipe Systems DVL double-wall or Duralack single-wall stovepipe completes the venting system when used with one of DuraVent s chimney products, such as DuraTech, DuraTech anada, DuraPlus, or DuraTech Premium. DVL DVL s double-wall, air-insulated design reduces clearances to combustibles from 18 to 6, the closest clearance to a wall of any connector pipe. DVL improves stove performance by maintaining high flue gas temperatures for a strong, steady draft. ecause the inner wall is stainless steel the flue heats up faster, stays hot longer, minimizes the formation of creosote, and has the same life expectancy as the chimney. djustable lengths eliminate the need for cutting or crimping. Required for Manufactured Home installations. See appliance manufacturer's installation instructions. Duralack For an economical, drip free, single-wall stovepipe, Duralack is an excellent choice. uilt to DuraVent s high standards, Duralack is constructed with die-formed end fittings. djustable lengths eliminate the need for cutting and crimping. vailable in 24 gauge lock-seam, 22 guage stainless steel and heavy duty 22 guage welded seam. Materials and onstruction Duralack: 24-gauge steel construction. Lock-seamed. Painted black. Duralack Welded: 22-gauge steel construction. Duralack Stainless Steel: stainless steel Diameters Duralack: 6-10 Duralack Welded: 6 Duralack Stainless Steel: 6 and DuraVent

3 Stovepipe Duralack Duralack - Single-Wall Stovepipe Duralack Stovepipe Kit Kit includes: 14 Duralack Slip onnector w/trim and (2) 24 Duralack Single-Wall lack Pipe. Use kit to connect between appliance and chimney for a typical 8 through-the-ceiling installation. ORDER # 6DK-KSP STOK # Duralack Slip onnector w/ Trim Used to adapt Duralack pipe to 6-8 eiling Support ox, including DuraTech, DuraPlus, and DuraTech Premium systems. The Slip connector can also be added to 6-8 DuraTech finishing collar. dds 3-13 of length to rigid pipe. Provides a strong mechanical connection ORDER # 6DK-S 7DK-S 8DK-S STOK # Duralack Slip onnector 14 Use to adapt Duralack pipe to ceiling support box or finishing collar. dds 3-13 of length to rigid pipe. llows drip-free installation without cutting the pipe. an be used in line to create a telescoping combination when used with a straight length of pipe. Requires screws. SIZE / /16 ORDER # 10DK-S STOK # DuraVent 115

4 Duralack Stovepipe Duralack Telescoping Length w/ Trim Use for a two-piece installation. onnects directly from stove to ceiling support box or finishing collar. djusts from No cutting required. vailable in stainless steel (SS). 44 ollapsed 68 Fully Extended D E D 68 E 33 ORDER # 6DK-TL STOK # Snap-Lock dapter w/ Trim 41 4 onnects into the ceiling support box or finishing collar and extends down to fit into stovepipe for a drip-free connection to a DuraTech, DuraPlus, DuraTech Premium, or DuraLiner himney system. Provides a strong mechanical connection. dapter will work with all 6-8 DuraPlus, 6-8 DuraTech Premium, and 7-8 DuraTech installations. dapter will work with 5-6 DuraTech eiling Support ox installations only. SIZE 5" ORDER # 5DK-DSL 6DK-DSL 7DK-DSL 8DK-DSL STOK # DVL/Duralack himney dapter w/ Trim ¼ 2½ Use to connect from double-wall DVL and/or single-wall Duralack to DuraTech, DuraPlus, DuraTech Premium, and DuraLiner for a through-the-wall or ceiling support installation. Required for proper connection. Made of stainless steel /8 7 1/8 7 1/8 ORDER # 6DVL-D 7DVL-D 8DVL-D STOK # DuraVent

5 Stovepipe Duralack Duralack Slip Increaser w/ Trim 8 3/ Use to adapt from 6 Duralack to 8 DuraTech, DuraPlus, DuraTech Premium, or DuraLiner at the ceiling support box or finishing collar. dds 5-15 of length. - 8 ORDER # 6DK-XS8 STOK # /16 Duralack Single-Wall lack Pipe Use for a single-wall connector pipe. Requires 18 clearance to combustibles. Subtract from length to calculate the installed length LENGTH ORDER # 6DK-12 7DK-12 8DK-12 10DK-12 STOK # LENGTH ORDER # 6DK-24 7DK-24 8DK-24 10DK-24 STOK # LENGTH ORDER # 6DK-48 7DK-48 8DK STOK # Duralack Increaser Use to increase from a smaller appliance flue outlet to a larger diameter chimney or stovepipe. 7 SIZE ORDER # 5DK-X6 6DK-X7 7DK-X8 8DK-X10 9DK-X10 STOK # Duralack Tee w/ lean-out ap Use with rear exit appliances and appliances that require a barometric damper D D ORDER # 6DK-T 7DK-T 8DK-T 10DK-T STOK # DuraVent 117

6 Duralack Stovepipe Duralack 45 Elbow Offsets obstructions as needed. Elbows angles are now adjustable. djustable elbows are manufactured drip free so creosote travels back to the stove as intended ORDER # 6DK-E45 7DK-E45 8DK-E45 10DK-E45 STOK # Duralack 90 Elbow Offsets obstructions as needed or to orient the stovepipe horizontally for through the wall installation. Elbows angles are now adjustable. djustable elbows are manufactured drip free so creosote travels back to the stove as intended. Not recommended for rear exit appliances ORDER # 6DK-E90 7DK-E90 8DK-E90 10DK-E90 STOK # Offset hart - Duralack OFFSET RISE Elbow Degrees SIZE 6" DIMETER 7 DIMETER 8 DIMETER 10 DIMETER himney Section Offset Rise Offset Rise Offset Rise Offset Rise DuraVent

7 Stovepipe Duralack Duralack Damper Section Install at, or close to, the stove outlet in-line. 5 pipe section with the damper pre-installed ORDER # 6DK-DS 7DK-DS 8DK-DS STOK # /8 7 1/8 8 1/ Duralack Oval-To-Round dapter onnects to the oval flue outlet of the appliance. Must be field ovalized ORDER # 6DK-DOR 7DK-DOR 8DK-DOR STOK # Duralack Double-Skirted Stovetop dapter Use to adapt Duralack stovepipe to appliance flue outlets. Outer wall covers appliance flue outlet. 4¼ ORDER # 6DK-DD 7DK-DD 8DK-DD 10DK-DD STOK # Duralack Stovetop dapter Use to adapt Duralack stovepipe to appliance flue outlet ORDER # 6DK-D 7DK-D 8DK-D STOK # METRI DPTER ORDER # 6DK-DM STOK # DuraVent 119

8 Duralack Stovepipe Duralack Trim ollar 1/4" Use as a decorative Trim ollar for Duralack connection to chimney. SIZE 6" ORDER # 6DK-T 7DK-T 8DK-T 10DK-T STOK # DuraVent

9 Duralack Stainless Steel - Single-Wall Stovepipe Stovepipe Duralack SS Duralack SS Slip onnector w/ Trim Use to adapt Duralack pipe to ceiling support box or finishing collar. dds 3-13 of length to rigid pipe. llows drip-free installation without cutting the pipe. an be used in line to create a telescoping combination when used with a straight length of pipe ORDER # 6DK-SSS 8DK-SSS STOK # Duralack SS Telescoping Length w/ Trim 44 ollapsed 68 Fully Extended D Use for a two-piece installation. onnects directly from stove to ceiling support box or finishing collar. djusts from No cutting required D 68 E 33 ORDER # 6DK-TLSS STOK # E Duralack SS Single-Wall Pipe Use for a single-wall connector pipe. Requires 18 clearance to combustibles. Subtract from the length to calculate the installed length LENGTH ORDER # 6DK-12SS 8DK-12SS STOK # LENGTH ORDER # 6DK-24SS 8DK-24SS STOK # LENGTH ORDER # 6DK-48SS 8DK-48SS STOK # DuraVent 121

10 Duralack SS Stovepipe Duralack SS Tee w/ lean-out ap D Use with rear exit appliances and appliances that require a barometric damper D ORDER # 6DK-TSS 8DK-TSS STOK # Duralack SS 45 Elbow Offsets obstructions as needed. djustable ORDER # 6DK-E45SS 8DK-E45SS STOK # Duralack SS 90 Elbow Offsets obstructions as needed. djustable. Not recommended for rear exit appliances ORDER # 6DK-E90SS 8DK-E90SS STOK # Duralack SS Stovetop dapter Use to adapt Duralack stovepipe to appliance flue outlet ORDER # 6DK-DSS 8DK-DSS STOK # DuraVent

11 Stovepipe Duralack Welded Duralack Welded - Single-Wall Stovepipe 22 Gauge Duralack Welded Slip onnector w/ Trim 14 Use to adapt Duralack pipe to ceiling support box or finishing collar. dds 3-13 of length to rigid pipe. llows drip-free installation without cutting the pipe. an be used in line to create a telescoping combination when used with a straight length of pipe. Requires screws ORDER # 6DK-SW STOK # Duralack Welded Telescoping Length w/ Trim 44 ollapsed 68 Fully Extended D Use for a two-piece installation. onnects directly from stove to ceiling support box or finishing collar. djusts from No cutting required. vailable in stainless steel (SS) D 68 E 33 ORDER # 6DK-TLW STOK # E Duralack Welded Single-Wall lack Pipe Use for a single-wall connector pipe. Requires 18 clearance to combustibles. Subtract from length to calculate the installed length ORDER # 6DK-12W 12 LENGTH STOK # ORDER # 6DK-24W 24 LENGTH STOK # ORDER # 6DK-48W 48 LENGTH STOK # DuraVent 123

12 Duralack Welded Stovepipe Duralack Welded Tee w/ lean-out ap D Use with rear exit appliances and appliances that require a barometric damper D ORDER # 6DK-TW STOK # Duralack Welded 45 Elbow Offsets obstructions as needed. djustable ORDER # 6DK-E45W STOK # Duralack Welded 90 Elbow Offsets obstructions as needed. djustable. Not recommended for rear exit appliances ORDER # 6DK-E90W STOK # Duralack Welded Damper Section 5 Install at, or close to, the stove outlet in-line. 5 pipe section with the damper pre-installed. 6 1/8 6 ORDER # 6DK-DSW STOK # DuraVent

13 Stovepipe Duralack Welded Duralack Welded Stovetop dapter 4 Use to adapt Duralack stovepipe to appliance flue outlet ORDER # 6DK-DW STOK # DuraVent 125