M-B Companies, Inc. Specification. Model 320. Palletized Striper. Air Atomizing, Pressure Pot. Options. January 11, 2005

Transcription

1 M-B Companies, Inc. Administration Pavement Marking Equipment Divisions 1615 Wisconsin Avenue EAST COAST DIVISION WEST COAST DIVISION P.O. Box Montgomery Street 2490 Ewald S.E. New Holstein, WI Montgomery, PA Salem, OR Phone: Phone: Phone: FAX: FAX: FAX: Specification Model 320 Palletized Striper Air Atomizing, Pressure Pot Options January 11, 2005 Re v. 1 This specification describes options for an M-B model 320 Air Atomizing, Pressure Pot Palletized Striper and is for reference only. The M-B Companies reserve the right to change this Standard specification without notice. Thus, it is important that final specifications per customer requirements, (replace standard with Customer name) be completed by M-B as close as possible in time for bid. Please consult M-B Companies Sales Department with any questions or requests.

2 Page 2 of 5 It is the intent of this specification to describe and define all options for a 320 Air Atomizing, Pressure Pot Palletized Striper. The format of this specification is itemized form for ease of topic definition and topic reference. Table of Contents 1. Agitator, Air Driven 2. Air Compressor: 47 CFM 3. Auxiliary Engine: Briggs & Stratton 4. Crosswalk Gun Carriage 5. Footage Counter 6. Hand Held Paint Gun 7. Intercom System 8. Startup and Training 9. Storage Cart 10. Strobe Light 11. Third Paint & Bead Gun 12. Trailer

3 Page 3 of 5 1. Agitator, Air Driven 1. Two stainless steel paddles, minimum 2. Drive motor has a valve to control paddle speed 2. Air Compressor: 47 CFM 1. Compressor belt driven by auxiliary engine 1. Two stage, three cylinder air cooled psi 3. Preset safety air unloader valve permitting air pressure only when required 3. Auxiliary Engine: Briggs & Stratton Vanguard hp, gas 2. 2 cylinder OHV 4. Crosswalk Gun Carriage 1. Use paint and bead supply from palletized feet paint and bead hose 3. One paint gun 4. One glass bead gun 5. Well balanced and short frame 1. Welded steel construction, torsionally rigid 2. Three wheels X 1.75 ball bearing for low resistance pushing 6. Gun mount and bar positioned right or left side of unit 1. Adjust up and down, left and right for operator adjustable gun placement 2. Allow each gun to be positioned independent of any other gun 5. Footage Counter (2 or 3 gun system) 1. LCD Display 2. Self contained power source 1. 2 N alkaline cells 2. Average life four years 3. Increments every 1/10 of a mile 4. Display contained in waterproof box 1. Box hold up to eight displays 5. Signal from timer pulse 6. All connections using Amphenol connectors 6. Hand Held Paint Gun 1. Binks handgun of paint hose 3. Connection point with ball valve

4 Page 4 of 5 7. Intercom System 1. Two station intercom system 2. Front station mounted in cab 1. Single ear headset and boom microphone 2. Voice activated to talk 3. Rear station by striper controls 1. Two headset options 1. Single ear 2. Dual ear 2. Depress foot switch to talk 1. Minimizes traffic noise interference 8. Startup and Training 1. Factory trained and authorized technician for machine startup and crew training 1. Training dates and times will be agreed upon 2. The purpose of this training is to review safe and effective procedures for use and maintenance of the machine, review and test all systems, assure the full function of the machine, and conducted according to the work and crew schedules of the purchaser 2. Maximum two days training and startup 9. Storage Cart 1. For striper storage when not in use 2. All steel construction 3. Approximate height x 2 Swivel casters 1. All 4 wheels 10. Strobe Light 1. Amber strobe light 2. Located at rear of platform on adjustable stand 3. Power provided by auxiliary engine alternator 11. Third Paint & Bead Gun (requires air compressor upgrade if all guns to be used at once) 1. One Binks 21M type paint gun 1. 4" line width, thickness 2. Air atomized, bleeder type 3. Corrosion resistant material for all paint wetted parts 4. Each with solenoid operated air valves 2. One MB Kamber 90HO" glass bead gun, no exceptions 1. Smooth surfaced deflector to assure full line coverage 2. Minimum three adjustment tips for bead guns to assure proper operation and set up of the unit in varied conditions (one complete set per gun)

5 Page 5 of 5 3. Complete with controls and plumbing 4. Mounted on carriage 12. Trailer Mounted 1. Skid mounted on towable 4 wheel trailer 2. Dual 3000 lb torsion axles 3. 2 ball hitch 4. All channel frame 5. 6 pin connector plug 6. Electric brakes 7. Tail lighting