Knorr-Bremse RailServices (UK) Ltd Springburn
|
|
- Nora Marsh
- 5 years ago
- Views:
Transcription
1 Knorr-Bremse RailServices (UK) Ltd Springburn 79 Charles Street, Springburn Glasgow United Kingdom G21 2PS has been assessed and approved in accordance with the requirements of RISAS/003 for 17 product groups, of which 17 have limitations. The scope of accreditation is applicable only to the products identified in the certificate schedule R0188/0014/C0091 Please also see the appendix of the same number, which details the limitations, if limitations exist. Full details of the Supplier's approval status and an executive summary are available to all registered users at
2 Knorr-Bremse RailServices (UK) Ltd Springburn 79 Charles Street, Springburn Glasgow United Kingdom G21 2PS M01 - Running Gear Eng Change? Expiry Date A - Wheelsets Trailer Wheelsets 31/08/ Powered Wheelsets 31/08/2019 B - Wheelset Components Axlebox bearings 31/08/ Axles 31/08/ Axleboxes * 31/08/ Gearwheels * 31/08/ Monobloc Wheels 31/08/ Suspension Tubes * 31/08/ Wheel Centres & Tyres 31/08/2019 D - Suspension Components Axleboxes * 31/08/2019 * Denotes identical to another product Page 1 of 2
3 Knorr-Bremse RailServices (UK) Ltd Springburn 79 Charles Street, Springburn Glasgow United Kingdom G21 2PS M07 - T&RS Transmission Eng Change? Expiry Date A - Gearboxes (Mechanical transmission) Gearwheels * 31/08/ Bearings * 31/08/ Final Drives 31/08/2019 B - Gearcases (Electrical transmission) Gearcases (electrical transmission) 31/08/ Gearwheels * 31/08/ Suspension Tubes * 31/08/ Bearings * 31/08/2019 * Denotes identical to another product Page 2 of 2
4 M01-A Trailer Wheelsets Subject to a general surveillance assessment within 12 Approval is for the assembly, overhaul and repair of trailer wheelsets fitted with monobloc and tyred wheels on solid axle and / or hollow axle wheelsets. Fitment of wheels to axles is limited to the heat-shrink method only. Press-fitting of wheels is excluded. Scope excludes wheelsets for Rail Mounted Machines or wheel skates. M01-A Powered Wheelsets Subject to a general surveillance assessment within 12 Approval is for the assembly, overhaul and repair of powered wheelsets fitted with monobloc and tyred wheels on solid axle and / or hollow axle wheelsets. Fitment of wheels and gearwheels to axles is limited to the heat-shrink method only. Press-fitting of wheels and gearwheels to axles or bolting of gears to flanged axles is excluded. Scope excludes wheelsets for Rail Mounted Machines or wheel skates. M01-B Axlebox bearings Subject to a general surveillance assessment within 12 Approval is limited to the inspection and assembly of spherical and roller type axle bearings and fitting of cartridge type bearings to axles. Scope excludes overhaul of cartridge type bearings. M01-B Axles Subject to a general surveillance assessment within 12 Machining of axles is permitted only when applying an approved reclamation procedure or for the cleaning up of wheel and gear seats within drawing tolerances. Machining of new axles from blanks is excluded. M01-B Axleboxes * Subject to a general surveillance assessment within 12
5 M01-B Gearwheels * Subject to a general surveillance assessment within 12 Fitment of gearwheels to axles is limited to the heatshrink method only. Pressfitting of gearwheels or bolting of gears to flanged axles is excluded. M01-B Monobloc Wheels Subject to a general surveillance assessment within 12 Fitment of wheels to axles is limited to the heat-shrink method only. Press-fitting of wheels is excluded. M01-B Suspension Tubes * Subject to a general surveillance assessment within 12 M01-B Wheel Centres & Tyres Subject to a general surveillance assessment within 12 Fitment of wheels to axles is limited to the heat-shrink method only. Press-fitting of wheels is excluded. M01-D Axleboxes * Subject to a general surveillance assessment within 12
6 M07-A Gearwheels * Subject to a general surveillance assessment within 12 Fitment of gearwheels to axles is limited to the heatshrink method only. Pressfitting of gearwheels or bolting of gears to flanged axles is excluded. M07-A Bearings * Subject to a general surveillance assessment within 12 Approval for inspection only. M07-A Final Drives Subject to a general surveillance assessment within 12 M07-B Gearcases (electrical transmission) Subject to a general surveillance assessment within 12 M07-B Gearwheels * Subject to a general surveillance assessment within 12 Fitment of gearwheels to axles is limited to the heatshrink method only. Pressfitting of gearwheels or bolting of gears to flanged axles is excluded.
7 M07-B Suspension Tubes * Subject to a general surveillance assessment within 12 M07-B Bearings * Subject to a general surveillance assessment within 12 Approval for inspection only.
Bombardier Crewe. West Street Crewe, Cheshire United Kingdom CW1 3JB. has been assessed and approved
, Cheshire has been assessed and approved in accordance with the requirements of RISAS/003 for 34 product groups, of which 9 have limitations. The scope of accreditation is applicable only to the products
More informationBranding of Wheels,Tyres and Axles
Branding of Wheels,Tyres and Axles Signatures removed from electronic version Submitted by G A Clayton Nominated Responsible Manager Synopsis This standard details the branding requirements for all wheels,
More informationRailway Wheelsets. Railway Group Standard. GM/RT2466 Issue Three Date February 2010
Superseded in part by GMRT2466 Iss 4 and RIS-2766-RST Iss 1 Railway Group Standard Synopsis This document mandates requirements for the design, manufacture and maintenance of wheelsets and their components.
More informationCERTIFICATE OF APPROVAL No CF 249. Yung Chi Paint & Varnish Mfg. Co., Ltd
CERTIFICATE OF APPROVAL No CF 249 1 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Yung Chi Paint & Varnish
More informationCERTIFICATE OF APPROVAL No CF 5235 AVIANS INNOVATIONS TECHNOLOGY PVT. LTD
CERTIFICATE OF APPROVAL No CF 5235 1 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of AVIANS INNOVATIONS
More informationGB NDT AXLE TESTING & DEFECT TYPES FOUND
Applied Inspection Ltd GB NDT AXLE TESTING & DEFECT TYPES FOUND ESIS TC24 Workshop at RSSB 03/04 March 2011 Presented by Roy Archer (Technical Manager Rail - Level 3) Manual ultrasonic testing used for
More informationGM/RC2495. Recommendations for Railway Wheelset Manufacture and Assembly. Railway Group Recommendations for GM/RT2466.
RC Published by Rail Safety and Standards Board Evergreen House 160 Euston Road London NW1 2DX Copyright 2008 Rail Safety and Standards Board Limited GM/RC2495 Issue One: August 2008 Railway Group Recommendations
More informationRisk Management of Rail Vehicle Axle Bearings
Railway Group Standard Risk Management of Rail Vehicle Axle Bearings Synopsis This Railway Group Standard mandates that there shall be riskbased processes to minimise and detect failures of rail vehicle
More informationSchedule PART 1: PRELIMINARY
Roads and Maritime Services Class 1 Special Purpose Vehicles Notice 2014 I, Peter Duncan, Chief Executive Roads and Maritime Services (RMS), pursuant to Clause 12 of the Road Transport (Mass, Loading and
More informationDATA. icargo) Product. Application. Purpose. Function. Knorr-Bremse s intelligent axle loading system, icargo, is designed to work on:
Commercial Vehicle Systems Product DATA Doc. No. Y09 (EN - Rev. 00) January 0 Application Knorr-Bremse s intelligent axle loading system,, is designed to work on: Semi-trailers with two to five axles Centre-axle
More informationCERTIFICATE OF APPROVAL No CF 5172 ETEX BUILDING PERFORMANCE LTD
CERTIFICATE OF APPROVAL No CF 5172 1 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Gordano House, Marsh
More informationE/ECE/324/Rev.2/Add.108/Rev.1/Amend.3 E/ECE/TRANS/505/Rev.2/Add.108/Rev.1/Amend.3
16 January 2019 Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and
More informationRolling bearings Plain bearings Linear technology. Complete Wheelset BETTER COMPONENTS THROUGH SYSTEM UNDERSTANDING MOBILITY FOR TOMORROW
Rolling bearings Plain bearings Linear technology Complete Wheelset BETTER COMPONENTS THROUGH SYSTEM UNDERSTANDING MOBILITY FOR TOMORROW System Understanding Picture: Siemens Advantages Efficient and reliable
More informationc) same tread pattern type (mixed asymmetric, directional, normal highway, traction, winter tyre tread (Figure 7-1-2).
Correct as at 23rd April 2014. It may be superseded at any time. Extract taken: from NZTA Vehicle Portal > VIRMs > In-service certification (WoF and CoF) > General trailers > Tyres, wheels and hubs > Tyres
More information10-1 Tyres and wheels
Correct as at 21st December 2018. It may be superseded at any time. Extract taken: from NZTA Vehicle Portal > VIRMs > In-service certification (WoF and CoF) > Motorcycles > Tyres, wheels and hubs > Tyres
More informationAcceptance of Trams and Light Rail or Metro Vehicles for Shared Running on Railtrack Controlled Infrastructure
Acceptance of Trams and Light Rail or Metro Vehicles for Shared Running on Railtrack Controlled Infrastructure Synopsis This Standard defines the mandatory requirements for trams, light rail or metro vehicles
More informationEffective Utility Company Customer Acquisition and Retention Strategies
Brochure More information from http://www.researchandmarkets.com/reports/1636108/ Effective Utility Company Customer Acquisition and Retention Strategies Description: The Effective Utility Company Customer
More informationE17H RAIL WHEEL INSPECTION
E17H RAIL WHEEL INSPECTION PURPOSE AND SCOPE This Procedure applies to all items of rolling stock purchased or acquired through hiring or other means by Laing O Rourke for the railway operations they will
More informationCOMMISSION REGULATION (EU)
10.11.2010 Official Journal of the European Union L 292/21 COMMISSION REGULATION (EU) No 1009/2010 of 9 November 2010 concerning type-approval requirements for wheel guards of certain motor vehicles and
More informationDATA PD-214-F104. TEBS G2 Doc. No. Y (EN - Rev. 001) May Product. icargo. Function. Operation
Commercial Vehicle Systems Product DATA Function On semi-trailers and centre-axle trailers, the axle/bogie will act as a pivot point that, depending on the positioning of the cargo carried by the trailer,
More informationHigh Lift - 50mm to 150mm (Design) CODE LS9
High Lift - 50mm to 150mm (Design) CODE LS9 Code LS9 does not apply to ADR category L-group vehicles, including motor cycles. 1. Scope Code LS9 provides for the preparation of designs that may be approved
More informationDATA PD LS1..., LS2..., LS3... Lift Axle Valves - Pneumatic. P r o d u c t. Function. Technical Features
C o m m e r c i a l V e h i c l e S y s t e m s P r o d u c t DATA PD-503-200 Function Pneumatic Lift Axle Control Valves are used for the semi-automatic or fully automatic control of air suspended lift
More informationGuideline for. Motor Truck and Dog Trailer Combinations up to 50 tonnes total mass. in Queensland
Guideline for Motor Truck and Dog Trailer Combinations up to 50 tonnes total mass in Queensland Form Number 18 Version 2 August 2009 TABLE OF CONTENTS SECTION CONTENT PAGE 1 Guideline authority 3 2 Date
More informationGM/RC2496. Recommendations for Railway Wheelset Maintenance. Railway Group Recommendations for GM/RT2466. Published by
RC Published by RSSB Block 2 Angel Square 1 Torrens Street London EC1V 1NY Copyright 2010 Rail Safety and Standards Board Limited GM/RC2496 Issue Two: February 2010 Railway Group Recommendations for GM/RT2466
More informationCERTIFICATE OF APPROVAL No CF 5069 HILTI AG
CERTIFICATE OF APPROVAL No CF 5069 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of BU Chemicals, Feldkircherstraße
More informationGearbox Instruction Manual
Gearbox Instruction Manual Rotork Gears gearbox ranges IW, MOW, MTW, IB, IS, HOB/MPR & HOS/MPR! This manual contains important safety information. Thoroughly read and understand it before installing the
More informationCERTIFICATE OF APPROVAL No CF 681 INTERNATIONAL PAINT LIMITED
CERTIFICATE OF APPROVAL No CF 681 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Stoneygate Lane, Felling,
More informationCERTIFICATE OF APPROVAL No CF 557 JOTUN PAINTS (EUROPE) LIMITED
CERTIFICATE OF APPROVAL No CF 557 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Stather Road, Flixborough,
More informationREVIEWED BY CAPITAL PROJECTS MANAGER (DAN REDDY) AUTHORIZED BY CEO DESCRIPTION OF REVISION APPROVAL
REFERENCE EEAM-Q-004 REVISION 1 SA Port Operations DOCUMENT TYPE SPECIFICATION TITLE: SPECIFICATION FOR GEARING, SHAFTS, BEARINGS, BRAKES, LUBRICATION, VEE-BELTS, KEY WAYS PAGE 0 of 6 COMPILED BY REVIEWED
More informationGearbox Installation Manual
Gearbox Installation Manual Rotork Gears IW, MOW, MTW, IB and IS ranges (Electronic copy available on www.rotork.com)! This manual contains important safety information. Please ensure it is thoroughly
More informationInsert the title of your presentation here. Presented by Name Here Job Title - Date
Insert the title of your presentation here Presented by Name Here Job Title - Date New spray suppression Insert the title of your technology presentation here Type Approval under Article 20 of the framework
More informationCERTIFICATE OF APPROVAL No CF 700 RUDOLF HENSEL GMBH
CERTIFICATE OF APPROVAL No CF 700 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Lauenburger Landstrasse
More informationRigid 8 2. Rigid 8 4
DRIVE / CHASSIS HEIGHT / WHEELBASE (dimensions in dm) Rigid Rear 34 40 40 Rigid 6 2 Rear 48 48 48 Rigid 6 4 Rear Rigid 8 2 Rear Pusher Tridem 62 Rear Tag Tridem Rigid Pusher Tridem 64 64 53 53 47 1 chassis
More informationGearboxes. Gearboxes
254 Brammer provide a comprehensive nationwide industrial repair service. Strategically located Gearbox Centres around the UK Complete service from emergency repair or gearbox replacement to scheduled
More informationSetting the Standards Trailer Component Suppliers Perspective
Setting the Standards Trailer Component Suppliers Perspective Mario Colosimo BPW Historical Perspective For many years trailers had to be cheap to buy, with little consideration to whole of life costs.
More informationFunction ECU, Wireless
Commercial Vehicle Systems Product DATA PD-551-000 Function ECU, Wireless The is a Gateway Receiver system to alert the driver if any monitored tyre runs under its normal pressure or above its normal temperature.
More informationThe Indespension Trailer Range
The Indespension Trailer Range In dustrial dustrial Purchasing an Indespension Trailer means that the customer will be rewarded with the complete ownership experience in both the short and long term. Premium
More informationA Product of Hard Work ROUGH TERRAIN FORK LIFT
A Product of Hard Work ROUGH TERRAIN FORK LIFT Rough terrain fork lifts Lift capacities of 2.6 to 4 tonnes and lift heights from 3.6 to 6.70m 63kW (84hp) engine delivers powerful performance JCB Synchro
More informationCOMMISSION REGULATION (EU) / of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2017) XXX draft COMMISSION REGULATION (EU) / of XXX implementing Regulation (EU) No 595/2009 of the European Parliament and of the Council as regards the determination
More informationOverview SC 800 / 800 propane
Table 0-1 Spare parts grinding head Overview SC 800 / 800 propane Figure 0-1 Overview of SC-800 Item Reference / art no. Description 1 570627 Handle 2 570039 Sprint to adjust handle 3 911008 Water connection
More informationCERTIFICATE OF APPROVAL No CF 574. Sika Deutschland GmbH
CERTIFICATE OF APPROVAL No CF 574 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Kornwestheimer Strasse
More informationRough Terrain Fork Lift
ROUGH TERRAIN FORK LIFT Rough Terrain Fork Lift Engine Power: 55kW (74hp) Operating Capacity: 2.6 to 4 tonnes Operating Weight: 5910kg to 7500kg Rough terrain fork lifts Lift capacities of 2.6 to 4 tonnes
More informationMultidisc Mowers GMD and 77HD SELECT
Multidisc Mowers GMD 44-55 - 66 and 77HD SELECT GRASS HARVESTING AT ITS BEST! Multidisc Mowers GMD series 44-55 - 66 and 77HD SELECT The achievement of several decades of experience... 1 A respectable
More informationPeriod: A - to Valid to FIA Class:
Page1 Red and/or black dot entries: HISTORIC TECHNICAL PASSPORT VALID IN: & & This Technical Passport is not a certificate of authenticity, nor does it in any way verify the history of the car or its constituent
More informationPARTS LIST TRAILER BRAKE SYSTEMS. LIT NO: DATE: October 2017 REVISION: H
PARTS LIST TRAILER BRAKE SYSTEMS LIT NO: 97-097 DATE: October 07 REVISION: H TABLE OF CONTENTS INTRODUCTION ABBREVIATIONS DRUM BRAKES & 6. DRUM FOUNDATION BRAKE HXS Brakes P-TYPE DRUM FOUNDATION BRAKE
More informationSERVICE BULLETIN MANDATORY REPLACEMENT OF THE PROPELLER GEARBOX FOR SOME ROTAX ENGINES TYPE 912/914 (SERIES) SB UL SB UL
MANDATORY SERVICE BULLETIN REPLACEMENT OF THE PROPELLER GEARBOX FOR SOME ROTAX ENGINES TYPE 912/914 (SERIES) UL UL Repeating symbols: Please, pay attention to the following symbols throughout this document
More informationCode of Practice 305 Caravan Movers
The UK trade body for the caravan, motorhome, caravan holiday and park home industry. Code of Practice 305 Caravan Movers (minor revision) Publication Date: 1 Scope This code of practice specifies the
More informationGEAR PUMPS DIMENSIONAL DETAILS
DIMENSIONAL DETAILS OUTLET INLET TYPE DISPLACEMENT CM 3 /REV FLOW AT 1500 REV/MIN MAX. WORKING PRESSURE MAX. SPEED DIMENSIONS MM P1 P2 P3 RPM L M D2 1.4 2.0 270 290 310 6000 40 79 D3 2.1 2.9 270 290 310
More informationLift axle control on axle 1. Lift axle control on axle 3
Commercial Vehicle Systems Product DATA Function On vehicle combinations using semi-trailers it is often difficult to meet the turning corridor required by European Community (EC) legislation. When certain
More informationEuropean Aviation Safety Agency
TCDSN.A.189 Page 1/11 European Aviation Safety Agency TYPE-CERTIFICATE DATA SHEET FOR NOISE Jetstream 4100 Type Certificate Holder: BAE Systems (Operations) Ltd Prestwick International Airport Monkton,
More informationQuality Assurance of Precision Measuring and Testing Equipment
Rail Depot Measuring and Testing Equipment Quality Assurance of Precision Measuring and Testing Equipment inspect measure calibrate test evaluate DB Systemtechnik Introduction DB Systemtechnik Expertise
More informationRail & Transportation. Certificates
Certificates 1 Deutsche Bahn AG s Manufacturer-related product qualification (HPQ) Quality relates on the provisions contained in bodies of technical rules such as UIC, DIN EN, DBS, BN. HPQ It qualifies
More information10 Tyres, wheels and hubs
Correct as at 23rd November 2013. It may be superseded at any time. Extract taken from: NZTA Vehicle Portal > VIRMs > In-service certification (WoF) > General vehicles > Tyres, wheels and hubs 10 Tyres,
More informationPractical Guide for Calculating Vehicle Towing Capacity
Practical Guide for Calculating Vehicle Towing Capacity There are a number of factors to consider when determining what trailer will suit your business based on your needs and to ensure you remain in compliance
More informationOPTIONAL EXTENSION OF TIME BETWEEN OVERHAULS (TBO) FOR ROTAX ENGINE TYPE 912 AND 914 (SERIES) SB SB Repeating symbols:
AIRCRAFT ENGINES SERVICE BULLETIN EXTENSION OF TIME BETWEEN OVERHAULS (TBO) FOR ROTAX ENGINE TYPE 912 AND 914 (SERIES) OPTIONAL Repeating symbols: Please, pay attention to the following symbols throughout
More informationCLAMP AND FLANGE COUPLINGS
POWER TRANSMISSION RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS 2 CLAMP AND FLANGE COUPLINGS RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS FLANGE COUPLINGS DIN 116 Flange couplings are torsionally stiff, particularly
More informationFUSO A Daimler Group Brand model year
FUSO A Daimler Group Brand 8.55t GVW DUONIC Transmission 2014 model year 2014 model year Duonic transmission 8.55t GVW 4x2 Dimensions 9C15 9C18 A. Wheelbase mm 3400 3400 3850 4300 4750 B. Front Overhang
More informationPeristaltic Cased Tube Pumps
Peristaltic Cased Tube Pumps Operating Manual Verderflex Economy Version 1.0v-01/2014 Print No. 01 45, 500, 1500, 3000, 8000 Verderflex Economy 1.0v-01.2014 Version 1.0v-01/2014 Print-No. 01 Verderflex
More information50 years experience in offering tailor made solutions to suit every customer s need.
Digital Brochure 50 years experience in offering tailor made solutions to suit every customer s need. Mages Group was established in 1960 by Mr William Mages and has since grown to become one of the South
More informationTest Procedure for Measuring Fuel Economy and Emissions of Trucks Equipped with Aftermarket Devices
Test Procedure for Measuring Fuel Economy and Emissions of Trucks Equipped with Aftermarket Devices 1 SCOPE This document sets out an accurate, reproducible and representative procedure for simulating
More informationBogie Information. Issue 1
Bogie Information Issue 1 William Cook Rail Bogie Information Issue 1: 16 March 2017 Copyright 2014-2017 William Cook Rail Ltd. All rights reserved. This document is protected by copyright and design right
More informationPorsche Mobil 1 Supercup 2018 DMSB Visa no. 805/18, approved on
Bulletin 1/2018 Supplement to the Regulations of 22.03.2018. The amendment is valid with immediate effect. (Changes/Additions are printed in bold italic) Part 2: Technical Regulations 1. Technical Series
More informationTowing units. General information on towing units PGRT
General information on towing units General information on towing units is a collective term for one or more components with which the vehicle must be equipped in order to tow a trailer. The purpose of
More informationLocomotive Hauled Passenger Vehicle Specific Interface Requirements WOS
Discipline Engineering Standard Category Rolling Stock Locomotive Hauled Passenger Vehicle Specific Interface Requirements WOS 01.500 Applicability ARTC Network wide New South Wales Western Jurisdiction
More informationATTACHMENT V.3 TECHNICAL SPECIFICATIONS
ATTACHMENT V.3 TECHNICAL SPECIFICATIONS Page 1 of 12 TECHNICAL SPECIFICATIONS 1. REHABILITATION OF WHEELSETS A. All wheelsets shall be inspected to determine if they need to be replaced, rehabilitated
More informationWELLINGTON, NEW ZEALAND. PURSUANT to section 152 of the Land Transport Act 1998
WELLINGTON, NEW ZEALAND PURSUANT to section 152 of the Land Transport Act 1998 I, Maurice Donald Williamson, Minister of Transport, HEREBY make the following ordinary Rule: Land Transport Rule: Vehicle
More informationE/ECE/324/Rev.2/Add.108/Rev.1/Amend.2 E/ECE/TRANS/505/Rev.2/Add.108/Rev.1/Amend.2
7 December 2017 Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and
More informationKNOTT-AVONRIDE LTD. Welcomes You To Our Trailer Type Approval Seminar. O 1 & O 2 Trailers
KNOTT-AVONRIDE LTD Welcomes You To Our Trailer Type Approval Seminar O 1 & O 2 Trailers What You Can Do To Help Yourself? Minimise costs initial and ongoing Limit effort and time required Plan for future
More informationComponents for safety applications
Presentation CS-P with 1 cable entry With rotary operating head, with elbowed lever (flush with rear of switch) straight lever, f hinged covers and guards Pages /4, /4, /44 CS-PR with 1 cable entry With
More informationNHVIM Section 2 BASIC BRAKES MAINTENANCE
NHVIM Section 2 BASIC BRAKES MAINTENANCE Chair Lance Fisher, JLP Panel Members - Andrew Archibald, TMR Queensland - Renzo Barone, Meritor - Kevin Gibson, Knorr-Bremse Chair Lance Fisher, JLP Panel Members
More informationGENUINE REPAIR KITS SAVINGS CONVENIENCE SAFETY
SAVINGS CONVENIENCE SAFETY AIR SUSPENSION SPRING EYE KITS BPW SPRING EYE BUSH KITS NON ALIGNABLE HANGERS Bushes; spring eye bolts; wear washers; washers and nuts. To repair one axle. 0203160KIT 0203169KIT
More informationIndustrial Market, Strategic Industries Railway & Off-highway Business Unit
Industrial Market, Strategic Industries Railway & Off-highway Business Unit Speaker 25 min Rakesh Makhija President Strategic Industries 15 min Rutger Barrdahl Director Railway and Off-highway 15 min Ole
More informationTest Summary. Handling Tests on AlloyGator OE Alloy Wheel Rim Protectors
Test Summary 1210410#1a Customer: Authority: Curt Rathbone 61 Heming Road Washford Industrial Estate Redditch Worcestershire B98 0EA United Kingdom curt@alloygator.com Pro Forma Invoice SLIV/00085346 HORIBA
More informationWeight approx. [kg] II39908FA BZ Part No. Type No. Type Push Rod Seal TÜV Inspection Report
Commercial Vehicle Systems Product DATA PD-403-200 Function This range of Brake Chambers is used on axles fitted with drum brakes. The single diaphragm cylinder provides the service brake function. In
More informationCompletion Of Heritage Annual Inspection Steam Locomotives
Page 1 of 10 Completion Of Heritage Annual Inspection Steam Locomotives This cover sheet is to be completed by the inspector for each Heritage Vehicle inspected. The Heritage Vehicle Provider is to provide
More informationCertificate: / 22 March 2013
Test report: 936/21215448/A of 11 October 2012 Initial certification: 05 March 2013 Expiry date: 04 March 2018 Publication: BAnz AT 05 March 2013 B10, chapter II, No. 2.4 Approved application The tested
More informationCarl Stuart Ltd. Tallaght Business Park, Whitestown, Dublin 24. Calibration Laboratory Registration number: 270C
Tallaght Business Park, Whitestown, Dublin 24 Calibration Laboratory Registration number: 270C is accredited by the Irish National Board (INAB) to undertake calibration as detailed in the Schedule bearing
More information2017/18 TECHNICAL REGULATIONS
2017/18 TECHNICAL REGULATIONS Contents T1.0 Definitions... 5 T1.1 4x4 in Schools Vehicle... 5 T1.2 Chassis... 6 T1.3 Axle Track... 6 T1.4 Wheelbase... 6 T1.5 Tolerance... 6 T1.6 Tank / skid steer... 6
More informationQuick Reference Guide: Technical Data SAF-axles with air suspension system. IMS Limited
Quick Reference Guide: Technical Data SAF-axles with air suspension system IMS Limited IMS Limited is a key distributor for a range of premium products aimed at the commercial vehicle market and is the
More informationTest Report: Reference Axle
Test Report: Reference Axle Legislation UNECE Regulation 13.11 to Supplements 10-13, Annex 11, Appendix 3 Test Details Location of Test: Date of Test: VCA Representative(s): Manufacturer s Representative(s):
More informationSWIFT SPORT RALLYCROSS CHAMPIONSHIP. Technical Regulations
SWIFT SPORT RALLYCROSS CHAMPIONSHIP Technical Regulations The Following M.S.A. Vehicle & Technical Regulations apply, according to the current MSA Yearbook: Section J5, Technical Regulations N6.1 to 6.14.3
More informationCERTIFICATE OF APPROVAL No CF 5267 SHERWIN-WILLIAMS
CERTIFICATE OF APPROVAL No CF 5267 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Tower Works, Kestor
More information1. Semi- and centre-axle trailers To enable the automatic load sensing function to operate, it is necessary to define certain parameters as follows:
Commercial Vehicle Systems Product DATA Function Load Sensing Function (pneumatic suspension) PD-4-F00 The Load Sensing Function (LSF) of the TEBS Brake Module is used to replace the function of a load
More informationOriginal BMW Accessories. Installation Instructions.
Original BMW Accessories. Installation Instructions. 18" M Performance Brake System retrofit Front and rear axle with alloy sport brake discs, perforated and grooved F20, F21, F22, F23, F30, F31, F32,
More informationCARGO SHIFTER Tough and uncompromised multi-purpose mover.
» Connected to you CARGO SHIFTER Tough and uncompromised multi-purpose mover. UNITED KINGDOM CARGO SHIFTER TOUGH AND UNCOMPROMISED MULTI-PURPOSE MOVER Brian James Trailers have created CarGO Shifter's
More informationTrack Circuit Assister Configuration for Rail Vehicles
Track Circuit Assister Configuration for Rail Synopsis This Standard mandates where TCAs shall be fitted onto a vehicle and how they shall be set up. It also contains the requirements for testing a TCA.
More informationWARRANTY GUIDELINES IMS
WARRANTY GUIDELINES CONTENTS The following are presented in page order below to assist you with your warranty/guarantee claims. Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page
More informationSECTION 23 CLASSIFICATION AND NUMBERING OF FREIGHT VEHICLES
SECTION 23 CLASSIFICATION AND NUMBERING OF FREIGHT VEHICLES ROA MANUAL SCHEDULE OF AMENDMENTS SECTION 23 AMENDMENT NUMBER PAGES AMENDED AMENDMENT SUMMARY DATE ISSUED TABLE OF CONTENTS Section Description
More informationEVALUATION SUBJECT: >B< MAXIPRO PRESS FITTINGS FOR AC AND REFRIGERATION APPLICATION
ICC-ES Report PMG-1440 Issued 09/2017 This report is subject to renewal 09/2018 EVALUATION SUBJECT: >B< MAXIPRO PRESS FITTINGS FOR AC AND REFRIGERATION APPLICATION DIVISION: 23 00 00 HEATING, VENTILATING
More informationTITGEMEYER TUK Sideline (0609)1
TITGEMEYER TUK Sideline (0609) 50.06.0. SIDELINE Type II C Type II max. 750 0 max. 50 A L Telephone: +9 (0)5 /58-0 Telefax: +9 (0)5 /58-9 E-Mail: export@titgemeyer.com Gruppe50.06.0G(0609) 50.06.0.3 SIDELINE
More informationV1.1. European Common Criteria for Maintenance (ECCM) of freight wagon axles. to be applied in wheelset axle maintenance
European Common Criteria for Maintenance (ECCM) of freight wagon axles to be applied in wheelset axle maintenance Joint Sector Group for ERA Task Force on wagon/axle maintenance Lille 22 nd June 2010 1
More informationVEHICLE COMPONENTS SUPPLY EXPERTS
VEHICLE COMPONENTS SUPPLY EXPERTS VEHICLE COMPONENTS We build and maintain the strong supply chain links which power the global automotive industry. API Engineering have more than 15 years of experience
More informationFunction ECU, Wireless
Commercial Vehicle Systems Product DATA PD-551-000 Function ECU, Wireless The is a Gateway Receiver system to alert the driver if any monitored tyre runs under its normal pressure or above its normal temperature.
More informationPeriod: GR to 1971 valid to FIA Class: Fv/1
Red/black dot entries: HISTORIC TECHNICAL PASSPORT VALID IN: RACING & & This Technical Passport is not a certificate of authenticity, nor does it in anyway verify the history of the car or its constituent
More informationIMMUNISATION UPTAKE STATISTICS FOR IRELAND
IMMUNISATION UPTAKE STATISTICS FOR IRELAND A REPORT BY THE NATIONAL DISEASE SURVEILLANCE CENTRE Quarter 2-2003 November, 2003 Summary In Quarter 2-2003, national uptake rates for P 3 and MenC 3 at 12 months
More informationDATA PD AE1141 Lift Axle Valves - TEBS controlled. P r o d u c t
C o m m e r c i a l V e h i c l e S y s t e m s P r o d u c t DATA AE Doc. No. Y05067 (Rev. 00) August 0 PD-50-00 Function The TEBS controlled Lift Axle AE Valve is used for trailers with electronic braking
More informationCOMPONENT HOMOLOGATION POLICY AND PROCEDURE
COMPONENT HOMOLOGATION POLICY AND PROCEDURE Policy number THS001 Version V2 Approved by Board 2 December 2014 Responsible person Status CEO Public Fees reviewed Scheduled review date 8 November 2016 31
More informationWeight Stroke TÜV-Inspection approx. [kg] II )4) BZ M16x Port threads:
Commercial Vehicle Systems Product DATA Spring Brakes (S-cam), diaphragm/piston Doc. No. Y1137 (EN - Rev. 5) September 216 PD-413-1 Function This range of Spring Brakes is used on axles fitted with drum
More informationPage 1 of 5 2008 Ford Pickup 6.4L Eng F350 Super Duty SHUDDER OR VIBRATION ON ACCELERATION - ESPECIALLY WHEN LOADED TECHNICAL SERVICE BULLETIN Reference Number(s): 09-20-5, Date of Issue: October 19, 2009
More informationSPECIALIST DRIVING KNOWLEDGE AND SKILLS Demonstrate knowledge of operating a light four wheel drive (4WD) vehicle in an off-road environment
1 of 6 level: 3 credit: 4 planned review date: May 2008 sub-field: purpose: Driving This unit standard is for people who are driving light 4WD vehicles in. People credited with this unit standard are able
More information