Accessories. Glands... 18:2 A1/A2 Brass Gland with Outer Seal... 18:6. CW Brass Gland with Outer LSF Seal... 18:16

Transcription

1 Glands : A1/A Brass Gland with Outer eal : CX Brass Gland with Outer eal : Dome Top Gland with Outer eal : Technical Data : CW Brass Gland with Outer eal : CW (Brass or Aluminium) Gland with Outer eal : BW Brass Gland : E1W Brass Gland with Inner & Outer eals..... :1 Low moke & Fume Gland Kits :1 BW Brass Gland - LF :1 CW Brass Gland with Outer LF eal : CW Gland with Outer LF eal :1 electing Glands for Hazardous Areas : AF & AEX Flameproof & Increased afety Brass Gland with Outer eal : E1WF Flameproof & Increased afety Brass Gland with Inner & Outer eals :0 E1XF Flameproof & Increased afety Brass Gland with Inner & Outer eals :1 Universal Flameproof & Increased afety Gland with Inner & Outer eals : Brass Earth Tags : High Performance ealing Washers : teel, Brass & Aluminium Locknuts : PCP/PVC hrouds : Lugs for Medium Voltage Cables : Lugs : Insulated Crimps :0 Core End Ferrules (Bootlace Crimps) :1 Telcleats - Black Polythene & Grey LF : tandard Cleats : Telcleats - Black Polythene & Grey LF : Claw & Two Bolt Cleats - Aluminium Alloy..... : Cable Management - Cable Ties & Tapes : Cable Tiles & Warning Tapes : Polyurethane Resin Encapsulation uitable for,, Core XLPE/PVC WA Copper Conductor Cables : traight Joint Kits for Core Medium Voltage Cables : Cold hrink Outdoor Terminations for Core Medium Voltage Cables :0 CMP Gland election Chart :1

2 Glands Cable glands are designed to provide some or all of the following functions in a cabling system: Mechanical connection: Locate and anchor cable Earth continuity: Armour termination Ingress Protection: Protect against dust and liquids Hazardous area: Flameproof protection The design of cable glands are covered by B1, which covers size, finish, materials, performance, etc. The gland designs are basically a combination of compatibility with cable and installation requirements. Gland Types There are several distinct gland types covered in B1 Part 1; A Type B Type C Type D1 Type E1 Type D Type E Type uffixes are used to identify the type of armour on a cable: W = single wire armour. X = wire braid armour. Y = aluminium wire armour. Z = steel tape armoured. Hence, CW would be a single wire armour, whereas CX would be for a wire braid armour. The only difference is in the armour lock which caters for the physical size of the armour. 1 0

3 Gland Type A1/A BW CW CX E1W LF Glands BW CW Glands for Hazardous Areas AF E1WF E1XF EWF BARR-X Application/Use Indoor/outdoor brass gland for use with unarmoured cable. Indoor, low-cost, two-part brass gland for use with single wire armoured cable. Indoor/outdoor brass glands for use with single wire armoured cable. Provides seal on outer sheath of cable and separate armour locking ring. N.B. Aluminium gland available for aluminium wire armoured cable. Indoor/outdoor brass gland for use with braid armoured cables. Provides seal on outer sheath of cable and separate armour locking ring. Indoor/outdoor brass gland for use with single wire armour cable. Provides seal on inner and outer sheaths of cable and has separate armour locking ring. Indoor, low cost, two-part brass gland for use with LF single wire armoured cables. Indoor/outdoor brass gland for use with LF single wire armoured cables. Provides LF seal onto outer sheath of cable and separate armour locking ring. Indoor/outdoor brass gland for use with unarmoured cables. For use with flameproof or increased safety equipment (E.Exd or E.Exe). Indoor/outdoor brass gland for use with single wire armoured cable. Provides seal on inner and outer sheaths of cable and has separate locking ring. For use with flameproof or increased safety equipment (E.Exd or E.Exe). Indoor/outdoor brass gland for use with braid armoured cable. Provides seal on inner and outer sheaths of cable and has separate armour locking ring. For use with flameproof or increased safety equipment (E.Exd or E.Exe). Indoor/outdoor brass gland for use with single wire armoured and lead sheathed cables (e.g. EEMUA types, B0 PT1/Type ). Provides seal onto outer sheath of cable. Inner seal grips and provides earth continuity to lead sheath. Design has separate armour locking ring. For use with flameproof or increased safety equipment (E.Exd or E.Exe). Indoor/outdoor brass barrier gland for use with a braid armoured cable. Provides seal on outer sheath of cable and solid setting compound squeezed into the interstices of cable when installed to prevent escape of gases through centre of cable. For use with explosion proof equipment

4 1 I.P Ratings for Cable Glands I.P. (Index of Protection) Ratings detail the degree of protection against solid bodies and liquids and is tested against EN 0. Generally any seal has a rating of IP. However, since they are tested in isolation, when they are in conjunction with a piece of equipment this needs to be taken into consideration. Generally the following can be taken:- 1. Gland used in plain entry with backnut - IP.. Gland used in plain entry with sealing washer between gland and equipment interface - IP.. Gland used in tapped entry - IP.. These can be uprated by the use of sealing washers and thread sealants.. pecial designs of Gland are available which can achieve an IP Rating of IP. (N.B. Interface with equipment then becomes critical)

5 1 Degree of Protection EN 0 I.P. Ratings First Protection Digit (Against olid Bodies) 0 No protection. 1 Protected against solid bodies larger than 0mm, e.g., accidental contact with hand. Protected against solid bodies larger than mm, e.g., finger. Protected against solid bodies larger than.mm, e.g., tools and wires. Protected against solid bodies larger than 1.0mm, e.g., fine tools and small wires. Protected against dust (no harmful deposits). Completely protected against dust. econd Protection Digit (Against Liquids) 0 No protection. 1 Protected against vertically falling drops of water (condensation). Protected against drops of water falling at up to 1 from the vertical. Protected against rain falling at 0 from vertical. Protected against splashes of water from all directions. Protected against jets of water from all directions. Protected against jets of water of similar force to heavy seas. Protected against the effects of temporary immersion. Protected against prolonged effects of immersion under pressure

6 1 A1/A Brass Gland with Outer eal To B1: Part 1 uitable for unarmoured, plastic or rubber sheathed cables uitable for most indoor and outdoor applications eal rated to IP Cable & Gland Details Anixter Number Gland Manufacturer Gland ize Cable Dimensions Accommodated (mm) Overall Diameter Minimum Maximum E1AW-A1/A-/0C CMP /0.1. E1AW-A1/A-0 Prysmian 0.. E1AW-A1/A-0C CMP 0.1. E1AW-A1/A-0 Prysmian 0.0. E1AW-A1/A-0C CMP E1AW-A1/A-0 Prysmian E1AW-A1/A-C CMP E1AW-A1/A- Prysmian 1.0. E1AW-A1/A-C CMP 1.0. E1AW-A1/A- Prysmian.0. E1AW-A1/A-0C CMP 0.. E1AW-A1/A-0 Prysmian E1AW-A1/A-0C CMP E1AW-A1/A-0 Prysmian E1AW-A1/A-0C CMP 0..1 E1AW-A1/A-0 Prysmian 0..0 E1AW-A1/A-C CMP E1AW-A1/A- Prysmian. 0.0 Glands are supplied in kit form, complete with locknuts and shrouds. Up to size :- per kit. ize and above:- 1 per kit, with exception of CMP size which contains per kit.

7 CX Brass Gland with Outer eal 1 To B1: Part 1 uitable for wire braid armoured, plastic or rubber sheathed cables Outer seal grips sheath of cable eal rated to IP Weatherproof and water proof eal rated to IP Gland rated to IP with use of suitable sealing washer or thread sealant at gland interface Cable & Gland Details Anixter Number Gland Gland Cable Dimensions Accommodated (mm) Manufacturer ize Under Armour Overall Minimum Maximum Minimum Maximum E1AH-CX-/0C CMP / E1AH-CX-0 Prysmian E1AH-CX-0C CMP E1AH-CX-0 Prysmian E1AH-CX-0C CMP E1AH-CX-0 Prysmian E1AH-CX-C CMP E1AH-CX- Prysmian E1AH-CX-C CMP -... E1AH-CX- Prysmian -... E1AH-CX-0C CMP E1AH-CX-0 Prysmian Glands are supplied in kit form, complete with locknuts, earth tags and shrouds. Up to size :- per kit. ize and above:- 1 per kit, with exception of CMP size which contains per kit

8 1 Dome Top Gland with Outer eal uitable for unarmoured, plastic or rubber sheathed cables Polyamide nylon gland with neoprene seal Compact skin-top design, halogen free Quick and easy assembly eal rated at IP Temperature range -0 C to +0 C Available in grey, red, white colours (black available if required, replace G on part no. with B e.g. DTGB) IO Metric thread Cable Gland Details Anixter Number Gland ize Gland Colour Cable Dimensions Accommodated (mm) Minimum Maximum DTGG Grey.0.0 DTG0G 0 Grey.0.0 DTG0LG 0L Grey DTGG Grey DTGG Grey DTG0G 0 Grey.0.0 DTG0G 0 Grey DTGG Grey.0.0 DTG0R 0 Red.0.0 DTG0LR 0L Red DTGR Red DTG0W 0 White.0.0 DTG0LW 0L White DTGW White Locknuts MLG Grey - - ML0G 0 Grey - - MLG Grey - - MLG Grey - - ML0G 0 Grey - - ML0G 0 Grey - - MLG Grey - - ML0R 0 Red - - MLR Red - - ML0W 0 White - - MLW White - -

9 Technical Data Applicable to Nylon glands - Chemical Resistance Listed below is the general chemical resistance information for the materials used to manufacture the nylon glands detailed. = uitable L = Limited suitability U = Unsuitable 1 Chemical Agent Nylon Chemical Agent Nylon ATM Oil No. Acetaldehyde L Hydrogen sulphide (gas) Iso-octane Acetic acid (%) Acetic acid (glacial) L L Iso-propanol Lubricating oil Acetone Ammonium Hydroxide (%) Methanol Nitric acid (%) L U Benzene Benzyl Alcohol L Nitric acid (conc) Ozone (gas) U L Bromine (liquid) Butyl Alcohol Butyl Acetate Butylamine Carbon Tetrachloride U Paraffin oil Petrol Phenol ilicone oils odium hydroxide (0%) U Chlorine Gas Citric acid (%) U odium hypochlorite (bleach) tyrene L 1 Cresols Cyclohexane U ulphur dioxide (gas) ulphuric acid (%) U U 1 Diesel oil Diethyl ether ulphuric acid (0%) Toluene U 1 Ethanol Ethylamine L Transformer oil Trichloroethylene L Ethylene glycol Formaldehyde Tricresyl phosphate (KYDROL) Turps 1 Hexane Hydrochloric acid (%) U White spirit Xylene Hydrochloric acid (conc) Hydrogen peroxide (%) U L Zinc chloride U 0

10 1 CW Brass Gland with Outer eal To B1: Part 1 uitable for wire braid armoured, plastic or rubber sheathed cables Outer seal grips sheath of cable eal rated to IP Weatherproof and water proof eal rated to IP Gland rated to IP with use of suitable sealing washer or thread sealant at gland interface Brass glands are provided with steel locknuts and aluminium glands are provided with aluminium locknuts. For more corrosive environments brass locknuts may be supplied. Glands are supplied in kit form, complete with locknuts, earth tags and shrouds. Prysmian Up to size :- per kit. ize and above:- 1 per kit. CMP Up to size :- per kit. ize 0 and above:- 1 per kit

11 CW (Brass or Aluminium) Gland with Outer eal Anixter Number Gland Gland Cable Dimensions Accommodated (mm) Manufacturer ize Under Armour Overall Minimum Maximum Minimum Maximum E1AG-CW-/0 CMP / E1AG-CW-0C Prysmian E1AG-CW-0 CMP E1AG-CW-0C Prysmian E1AG-CW-0 CMP E1AG-CW-0C Prysmian E1AG-CW- CMP E1AG-CW-C Prysmian E1AG-CW- CMP -... E1AG-CW-C Prysmian -... E1AG-CW-0 CMP E1AG-CW-0C Prysmian E1AG-CW-0 CMP E1AG-CW-0 CMP E1AG-CW-0C Prysmian E1AG-CW- CMP E1AG-CW- CMP E1AG-CW-C Prysmian E1AG-CW- CMP E1AG-CW- CMP E1AG-CW-C Prysmian Aluminium CW Glands for Aluminium Wire Armoured Cable E1DN-CW-C CMP E1DN-CW-C CMP -... E1DN-CW-0C CMP E1DN-CW-0C CMP E1DN-CW-0C CMP

12 1 BW Brass Gland To B1: Part 1 uitable for single wire armoured, plastic or rubber sheathed cables For use in dry indoor situations Low-cost two-part design IP hroud may be used for additional ingress protection Brass glands are provided with steel locknuts. For more corrosive environments brass locknuts may be supplied. Anixter Number Gland Manufacturer Gland ize Glands are supplied in kit form, complete with locknuts, earth tags and shrouds. Prysmian Up to size :- per kit. ize and above:- 1 per kit. CMP Cable Dimensions Accommodated (mm) Under Armour Overall Minimum Maximum Minimum Maximum E1AJ-BW-0C Prysmian E1AJ-BW-0 CMP E1AJ-BW-0C Prysmian E1AJ-BW-0 CMP E1AJ-BW-C Prysmian E1AJ-BW- CMP E1AJ-BW-C Prysmian E1AJ-BW- CMP E1AJ-BW-0C Prysmian E1AJ-BW-0 CMP E1AJ-BW-0 CMP E1AJ-BW-0C Prysmian E1AJ-BW-0 CMP E1AJ-BW- CMP E1AJ-BW-C Prysmian E1AJ-BW- CMP E1AJ-BW- CMP E1AJ-BW-C Prysmian E1AJ-BW- CMP Up to size :- per kit. ize 0 and above:- 1 per kit. 0

13 E1W Brass Gland with Inner and Outer eals 1 To B1: Part 1 uitable for single wire armoured, plastic or rubber sheathed cables Outer seal grips sheath of cable Inner seal grips bedded layer of cable Weatherproof and waterproof Inner and outer seal rated to IP Gland rated to IP with use of suitable sealing washer or thread sealant at gland interface Anixter Number Gland Gland Cable Dimensions Accommodated (mm) Manufacturer ize Under Armour Overall Minimum Maximum Minimum Maximum E1BA-E1W-/0C CMP / E1BA-E1W-0 Prysmian E1BA-E1W-0C CMP E1BA-E1W-0 Prysmian E1BA-E1W-0C CMP E1BA-E1W-0 Prysmian E1BA-E1W-C CMP E1BA-E1W- Prysmian E1BA-E1W-C CMP E1BA-E1W- Prysmian E1BA-E1W-0C CMP E1BA-E1W-0 Prysmian E1BA-E1W-0C CMP E1BA-E1W-0 Prysmian E1BA-E1W-0C CMP E1BA-E1W-0 Prysmian E1BA-E1W-C CMP E1BA-E1W-C CMP..0.. E1BA-E1W- Prysmian E1BA-E1W-C CMP E1BA-E1W-C CMP E1BA-E1W- Prysmian Glands are supplied in kit form, complete with locknuts, earth tags and shrouds. Prysmian Up to size :- per kit. ize and above:- 1 per kit. CMP Up to size :- per kit. ize 0 and above:- 1 per kit

14 1 Low moke and Fume Gland Kits Convenient ready to use kits Contain everything necessary to terminate an LF cable run - gland(s) with LF seal(s), backnut(s), earth tag(s) and LF shroud(s) Zero halogen Complies with the test criteria of B, B category 1 Continuous operating temperature of -0 C to C Resists most chemicals, solvents, acids, alkalis, oils, moisture, steam and UV light Excellent tear resistance NOTE: The materials utilised in these kits are noted for the absence of smoke generating constituents, particularly halogens (fluorine, bromine and chlorine) thus avoiding the hazards of highly irritant and toxic fumes emitted by standard materials such as PCP and PVC when exposed to flame

15 BW Brass Gland - LF 1 To B1: Part 1 uitable for single wire armoured, plastic or rubber sheathed cables For use in dry, indoor situations Low cost two-part design IP LF shroud may be used for additional ingress protection Anixter Number Gland Gland Cable Dimensions Accommodated (mm) Manufacturer ize Under Armour Overall Minimum Maximum Minimum Maximum E1AJ-BW-0LF Prysmian E1AJ-BW-0CLF CMP E1AJ-BW-0LF Prysmian E1AJ-BW-0CLF CMP E1AJ-BW-LF Prysmian E1AJ-BW-CLF CMP E1AJ-BW-LF Prysmian E1AJ-BW-CLF CMP E1AJ-BW-0LF Prysmian E1AJ-BW-0CLF CMP E1AJ-BW-0CLF CMP E1AJ-BW-0LF Prysmian E1AJ-BW-0CLF CMP E1AJ-BW-CLF CMP E1AJ-BW-LF Prysmian E1AJ-BW-CLF CMP E1AJ-BW-CLF CMP E1AJ-BW-LF Prysmian E1AJ-BW-CLF CMP Glands are supplied in kit form, complete with locknuts, earth tags and shrouds. Prysmian Up to size :- per kit. ize and above:- 1 per kit. CMP Up to size :- per kit. ize 0 and above:- 1 per kit

16 1 CW Brass Gland with Outer LF eal To B1: Part 1 uitable for wire braid armoured, plastic or rubber sheathed cables Outer LF seal grips sheath of cable eal rated to IP Glands are supplied in kit form, complete with locknuts, earth tags and shrouds. Prysmian - Up to size :- per kit. ize and above:- 1 per kit. CMP - Up to size :- per kit. ize 0 and above:- 1 per kit. Weatherproof and water proof eal rated to IP Gland rated to IP with use of suitable sealing washer or thread sealant at gland interface

17 CW Gland with Outer LF eal Anixter Number Gland Gland Cable Dimensions Accommodated (mm) Manufacturer ize Under Armour Overall Minimum Maximum Minimum Maximum E1AG-CW-0LF Prysmian E1AG-CW-0CLF CMP E1AG-CW-0LF Prysmian E1AG-CW-0CLF CMP E1AG-CW-0LF Prysmian E1AG-CW-CLF CMP E1AG-CW-LF Prysmian E1AG-CW-CLF CMP -... E1AG-CW-LF Prysmian -... E1AG-CW-0CLF CMP E1AG-CW-0LF Prysmian E1AG-CW-0CLF CMP E1AG-CW-0LF Prysmian E1AG-CW-0CLF CMP E1AG-CW-0LF Prysmian E1AG-CW-CLF CMP E1AG-CW-CLF CMP E1AG-CW-LF Prysmian E1AG-CW-CLF CMP E1AG-CW-CLF CMP E1AG-CW-LF Prysmian

18 electing Glands for Hazardous Areas ZONE CLAIFICATION Zone 0 (Division 0) Explosive gas/air mixture is continuously present or for long periods. No equipment should be terminated in this zone. Zone 1 (Division 1) Explosive gas/air mixture is likely to occur in normal operation. Zone (Division ) Explosive gas/air mixture is not likely to occur and if so, only for a short period of time. Increased afety Glands(E.Exe) For use in hazardous environments and comply with EN001 and EN 00 (B01 Part 1 and Part ). These glands can only be used where no parts of the electrical equipment can produce sparks/arcing or exceeds the gas ignition temperature. E.Exe glands are normally recommended for Zone applications but can be used in Zone 1, i.e. indirect entry situations. Flameproof (E.Exd) Glands For use in hazardous environments and comply with EN001 and EN00 (B01 Part 1 and Part ). These glands are approved for direct entry applications in Zone 1 areas, IIA, IIB or IIC gas groups with the exception of AF glands which are for IIA and IIB groupings - may also be used in Zone areas. Explosion Proof Barrier Glands For use in hazardous environments and comply with EN001 and EN 00 (B01 Part 1 and Part ). These glands are approved for direct entry applications in Zone 1 areas, IIA, IIB, or more commonly IIC gas groups. electing Barrier Glands as opposed to Conventional Flameproof Glands The main applications for the specification of barrier glands in accordance with the relevant codes of practice, can be summarised as follows: With enclosures containing an ignition source and installed in Group IIC gas areas With an enclosure containing an ignition source and in a Zone 1 area where the volume of the enclosure exceeds litres With cables other than those specified in B0, B, B1, B, B, and B1 Where cold flow of cable installation is considered a possibility To prevent gas migration from one area to another To prevent moisture migration in cables Where the user assessment considers a barrier gland essential for safety 1 0

19 AF and AEX Flameproof and Increased afety Brass Gland with Outer eal 1 uitable for unarmoured, plastic or rubber sheathed cables uitable for most indoor and outdoor applications eal rated to IP Complies with IIA, IIB and IIC hazardous atmospheres (EN00) Zone 1 and Zone applications For use with flameproof and increased safety equipment (E.Exd and E.Exe) ATEX Certified Anixter Number Gland Manufacturer Gland ize Cable Dimensions Accommodated (mm) Overall Minimum Maximum E1AT-AF-/0C CMP /0.. E1AT-AEX-0 Prysmian 0.. E1AT-AF-0C CMP 0.1. E1AT-AEX-0 Prysmian 0.0. E1AT-AF-0C CMP E1AT-AEX-0 Prysmian E1AT-AF-C CMP E1AT-AEX- Prysmian. 1.0 E1AT-AF-C CMP 1.0. E1AT-AEX- Prysmian.. E1AT-AF-0C CMP 0.. E1AT-AEX-0 Prysmian E1AT-AF-0C CMP E1AT-AF-0C CMP 0..1 E1AT-AEX-0 Prysmian E1AT-AF-C CMP E1AT-AF-C CMP..0 E1AT-AEX- Prysmian 0.0. Glands are supplied in kit form, complete with locknuts and shrouds. Up to size :- per kit. ize and above:- 1 per kit, with exception of CMP size which contains per kit

20 1 E1WF Flameproof and Increased afety Brass Gland with Inner and Outer eals uitable for single wire armoured, plastic or rubber sheathed cables Outer seal grips sheath of cable Inner seal grips bedded layer of cable Weatherproof and waterproof Inner and outer seal rated to IP Gland rated to IP with use of suitable sealing washer or thread sealant at gland interface Complies with IIA, IIB and IIC hazardous atmospheres (EN00) Zone 1 and Zone applications For use with flameproof and increased safety equipment (E.Exd and E.Exe) ATEX Certified Anixter Number Gland Gland Cable Dimensions Accommodated (mm) Manufacturer ize Under Armour Overall Minimum Maximum Minimum Maximum E1BN-E1WF-/0C CMP / E1BN-E1WF-0 Prysmian E1BN-E1WF-0C CMP E1BN-E1WF-0 Prysmian E1BN-E1WF-0C CMP E1BN-E1WF-0 Prysmian E1BN-E1WF-C CMP E1BN-E1WF- Prysmian E1BN-E1WF-C CMP E1BN-E1WF- Prysmian.... E1BN-E1WF-0C CMP E1BN-E1WF-0 Prysmian E1BN-E1WF-0C CMP E1BN-E1WF-0 Prysmian E1BN-E1WF-0C CMP E1BN-E1WF-0 Prysmian E1BN-E1WF-C CMP E1BN-E1WF-C CMP..0.. E1BN-E1WF- Prysmian E1BN-E1WF-C CMP E1BN-E1WF-C CMP E1BN-E1WF- Prysmian Glands are supplied in kit form, complete with locknuts, earth tags and shrouds. Prysmian Up to size :- per kit. ize and above:- 1 per kit. CMP Up to size :- per kit. ize 0 and above:- 1 per kit. 0

21 E1XF Flameproof and Increased afety Brass Gland with Inner and Outer eals 1 uitable for single wire armoured, plastic or rubber sheathed cables Outer seal grips sheath of cable Inner seal grips bedded layer of cable Weatherproof and waterproof Inner and outer seal rated to IP Design has separate armour locking ring Gland rated to IP with use of suitable sealing washer or thread sealant at gland interface Complies with IIA, IIB and IIC hazardous atmospheres (EN00) Zone 1 and Zone applications For use with flameproof and increased safety equipment (E.Exd and E.Exe) ATEX Certified Anixter Number Gland Gland Cable Dimensions Accommodated (mm) Manufacturer ize Under Armour Overall Minimum Maximum Minimum Maximum E1BP-E1XF-0 Prysmian E1BP-E1XF -0 Prysmian E1BP-E1XF -0 Prysmian E1BP-E1XF - Prysmian E1BP-E1XF - Prysmian.... E1BP-E1XF -0 Prysmian E1BP-E1XF -0 Prysmian E1BP-E1XF -0 Prysmian E1BP-E1XF - Prysmian E1BP-E1XF - Prysmian Glands are supplied in kit form, complete with locknuts, earth tags and shrouds. Prysmian Up to size :- per kit. ize and above:- 1 per kit

22 1 1 1 Universal Flameproof and Increased afety Gland with Inner and Outer eals uitable for wire braid, single wire, steel tape and strip armoured plastic or rubber sheathed, extruded bedded cables Outer seal grips sheath of cable Inner seal grips bedded layer of cable Weatherproof and waterproof Inner and outer seal rated to IP Design has separate outer locking ring Gland rated to IP with use of suitable sealing washer or thread sealant at gland interface For use with flameproof equipment or increased safety equipment (E.Exd or E.Exe) Complies with group IIA, IIB, IIC hazardous atmospheres (EN 00) ATEX Certified Zone 1 and Zone applications Incorporates external boot seal which offers protection against moisture ingress to the armour Anixter Number Gland Gland Cable Dimensions Accommodated (mm) Manufacturer ize Under Armour Overall Minimum Maximum Minimum Maximum E1DZ-UNI-0 HAWKE E1DZ-UNI-0 HAWKE E1DZ-UNI-0 HAWKE E1DZ-UNI- HAWKE E1DZ-UNI- HAWKE E1DZ-UNI-0 HAWKE E1DZ-UNI-0 HAWKE E1DZ-UNI- HAWKE...0. E1DZ-UNI- HAWKE

23 Brass Earth Tags 1 Ensure earth continuity is maintained between the gland and the equipment Aluminium earth tags should be used with aluminium glands NOTE: Earth bond connections are specified in IEE wiring regulations and relevant Codes of Practice. Tag Details Anixter Number IO Entry Thread Diameter (mm) Bolt Hole Diameter (mm) BET0 0. BET. BET. BET BET BET 1. BET

24 1 High Performance ealing Washers Improve the IP rating between the gland and the equipment i.e. IP Fibre or Nylon available according to customer preference Washer Details Anixter Number IO Entry Thread Diameter (mm) Washer Material NW0W 0 Nylon NWW Nylon NWW Nylon NW0W 0 Nylon NW0W 0 Nylon NWW Nylon NWW Nylon FW0 0 (mall) Fibre FW0L 0 (Large) Fibre FW Fibre FW0 0 Fibre FW0 0 Fibre FW Fibre FW Fibre Galvanised errated Washers Used to prevent loosening of locknut Mild steel zinc plated 1 Washer Details 0 Anixter Number IO Entry Thread Diameter (mm) ER0 0 ER ER ER0 0 ER ER0 0

25 teel, Brass and Aluminium Locknuts 1 Used to secure gland body to the equipment where entry hole is not tapped Brass backnut recommended for most corrosive environments Aluminium backnut should be used with aluminium glands teel backnut are primarily for dry, low humidity environments Locknut Details Anixter Number IO Entry Thread Diameter (mm) Locknut Material BLN0 0 Brass BLN Brass BLN Brass BLN0 0 Brass BLN0 0 Brass BLN Brass BLN Brass teel and aluminium locknuts are available when required

26 1 PCP/PVC hrouds For fitting over cable glands where additional protection against onerous weather conditions and corrosion is required Provide an effective seal onto both gland and cable oversheath PCP shrouds are particularly recommended for outdoor and the most hostile conditions and are not affected by ultraviolet rays contained in sunlight PVC shrouds for use in dry indoor and most outdoor situations hroud Details Anixter Number To uit Gland ize (mm) hroud Material PCPO 0 PCP PCPA 0 PCP PCPB PCP PCPC PCP PCPC 0 PCP PCPD 0 PCP PCPE PCP PCPF PCP HR/O 0 PVC HR/A 0 PVC HR/B PVC HR/C PVC HR/C 0 PVC HR/D 0 PVC HR/E PVC HR/F PVC 0

27 Lugs for Medium Voltage Cables 1 These compression lugs are based on the standard tin plated connectors manufactured by Prysmian and are suitable for indoor and outdoor locations. Connections are manufactured from thick wall copper tubing and incorporate single hole palm. The base of the compression barrel is effectively water blocked via incorporation of a waterproof seal during manufacture. Lug Details Anixter Number To uit Conductor ize (mm ) tud ize (mm) LUGMV-0 0 LUGMV- LUGMV-0 0 LUGMV- LUGMV- LUGMV-0 0 LUGMV

28 1 Lugs The use of compression lugs for securing conductors to terminals has long been recognised as offering the optimum combination of electrical integrity, reliability and speedy installation. ingle hole, two hole and four hole palm lugs available. The compression system ensures a high level of termination when used in association with tooling supplied by the same manufacturer ensuring that the completed installation complies with the standards laid down in B EN -1 (Compression joints in copper conductors). Anixter stocks uninsulated compression lugs, produced from high conductivity electrolytic copper having a tin plated finish for operating temperatures up to C and also to prevent corrosion

29 Anixter Number To uit Conductor ize (mm ) tud ize (mm) Flex tr ingle Hole Palm LUG LUG.0 LUG.0 LUG LUG LUG LUG LUG LUG LUG LUG LUG LUG LUG LUG LUG LUG LUG LUG LUG LUG LUG LUG0 0 LUG0 LUG0 LUG0 LUG0 0 0 LUG0 LUG0 LUG0 LUG 0 LUG LUG Anixter Number To uit Conductor ize (mm ) Flex tr LUG0 0 LUG0 LUG0 LUG00 0 LUG 0 LUG LUG LUG LUG LUG LUG0 0 LUG0 0 LUG0 LUG0 LUG00 0 LUG LUG00 LUG00 LUG000 0 LUG LUG LUG Two Hole Palm E1AE-BT--CB 0 E1AE-BT--CB E1AE-BT-0-CB 0 E1AE-BT-00-CB 0 00 E1AE-BT-00-CB E1AE-BT-00-CB Four Hole Palm LUG00H 0 00 LUG00H LUG00H LUG0H 00 0 tud ize (mm) With regards to lugs for flexible conductors, it is common practice to go up one lug size to allow for the larger conductor diameter on a flexible conductor e.g. A 0sqmm lug size is used on a 0sqmm cable having flexible conductors. It is also necessary to ensure, that all the wires are contained within the lug, prior to the crimp being applied. For through crimps refer to joints section on page :

30 1 Insulated Crimps The use of compression crimps for securing conductors to terminals has long been recognised as offering the optimum combination of electrical integrity, reliability and speedy installation. Anixter can offer a range of UL approved (E) crimps insulated with high grade PVC which makes crimping easy whilst ensuring complete integrity of termination. tandard types available are ring crimp, fork crimp, flat blade crimp, pin crimp and butt splice types. Other sizes and types available from stock are Flanged Forks, Male Tabs, Female Push-ons, Fully insulated Female Push-ons, Piggy Backs, Male & Female Bullets. Crimp tools to suit are also available from stock. All crimps are supplied in packs of Anixter Number Description To uit Conductor ize IR1.-. Red Insulated Ring Crimp.mm hole 0. to 1.sqmm (- AWG) IR1.-. Red Insulated Ring Crimp.mm hole 0. to 1.sqmm (- AWG) IR1.-. Red Insulated Ring Crimp.mm hole 0. to 1.sqmm (- AWG) IR1.-. Red Insulated Ring Crimp.mm hole 0. to 1.sqmm (- AWG) IR1.-. Red Insulated Ring Crimp.mm hole 0. to 1.sqmm (- AWG) IR1.- Red Insulated Ring Crimp mm hole 0. to 1.sqmm (- AWG) IF1.-. Red Insulated Fork Crimp.mm hole 0. to 1.sqmm (- AWG) IF1.-. Red Insulated Fork Crimp.mm hole 0. to 1.sqmm (- AWG) IF1.-. Red Insulated Fork Crimp.mm hole 0. to 1.sqmm (- AWG) IBL1.- Red Insulated Flat Blade Crimp mm 0. to 1.sqmm (- AWG) IBL1.- Red Insulated Flat Blade Crimp mm 0. to 1.sqmm (- AWG) IP1.- Red Insulated Pin Crimp mm long 0. to 1.sqmm (- AWG) I1.-1. Red Insulated Butt plices 0. to 1.sqmm (- AWG) IR.-. Blue Insulated Ring Crimp.mm hole 1. to.sqmm (-1 AWG) IR.-. Blue Insulated Ring Crimp.mm hole 1. to.sqmm (-1 AWG) IR.-. Blue Insulated Ring Crimp.mm hole 1. to.sqmm (-1 AWG) IR.-. Blue Insulated Ring Crimp.mm hole 1. to.sqmm (-1 AWG) IR.-. Blue Insulated Ring Crimp.mm hole 1. to.sqmm (-1 AWG) IR.- Blue Insulated Ring Crimp mm hole 1. to.sqmm (-1 AWG) IF.-. Blue Insulated Fork Crimp.mm hole 1. to.sqmm (-1 AWG) IF.-. Blue Insulated Fork Crimp.mm hole 1. to.sqmm (-1 AWG) IF.-. Blue Insulated Fork Crimp.mm hole 1. to.sqmm (-1 AWG) IBL.- Blue Insulated Flat Blade Crimp mm 1. to.sqmm (-1 AWG) IBL.- Blue Insulated Flat Blade Crimp mm 1. to.sqmm (-1 AWG) IP.- Blue Insulated Pin Crimp mm long 1. to.sqmm (-1 AWG) I.-. Blue Insulated Butt plices 1. to.sqmm (-1 AWG) 0

31 Anixter Number Description To uit Conductor ize IR-. Yellow Insulated Ring Crimp.mm hole.0 to.0sqmm (- AWG) IR-. Yellow Insulated Ring Crimp.mm hole.0 to.0sqmm (- AWG) IR-. Yellow Insulated Ring Crimp.mm hole.0 to.0sqmm (- AWG) IR-. Yellow Insulated Ring Crimp.mm hole.0 to.0sqmm (- AWG) IR-. Yellow Insulated Ring Crimp.mm hole.0 to.0sqmm (- AWG) IR- Yellow Insulated Ring Crimp mm hole.0 to.0sqmm (- AWG) IF-. Yellow Insulated Fork Crimp.mm hole.0 to.0sqmm (- AWG) IF-. Yellow Insulated Fork Crimp.mm hole.0 to.0sqmm (- AWG) IF-. Yellow Insulated Fork Crimp.mm hole.0 to.0sqmm (- AWG) IBL- Yellow Insulated Flat Blade Crimp mm.0 to.0sqmm (- AWG) IBL- Yellow Insulated Flat Blade Crimp mm.0 to.0sqmm (- AWG) IP-1 Yellow Insulated Pin Crimp 1mm long.0 to.0sqmm (- AWG) I- Yellow Insulated Butt plices.0 to.0sqmm (- AWG) Insulated Crimps (continued) Core End Ferrules (Bootlace Crimps) French Colour Code Anixter Number Description German Colour Code Anixter Number Description KPET0.F 0.sqmm Bootlace Crimp - White KPET0.G 0.sqmm Bootlace Crimp - Orange KPET0.F 0.sqmm Bootlace Crimp - Blue KPET0.G 0.sqmm Bootlace Crimp - White KPET1.0F 1.0sqmm Bootlace Crimp - Red KPET1.0G 1.0sqmm Bootlace Crimp - Yellow KPET1.F 1.sqmm Bootlace Crimp - Black KPET1.G 1.sqmm Bootlace Crimp - Red KPET.F.sqmm Bootlace Crimp - Grey KPET.G.sqmm Bootlace Crimp - Blue KPETF.0sqmm Bootlace Crimp - Orange KPETG.0sqmm Bootlace Crimp - Grey KPETF.0sqmm Bootlace Crimp - Green KPETG.0sqmm Bootlace Crimp - Black KPETF sqmm Bootlace Crimp - Brown KPETG sqmm Bootlace Crimp - Ivory KPETF sqmm Bootlace Crimp - Ivory KPETG sqmm Bootlace Crimp - Green 1 0 1

32 1 Telcleats - Black Polythene and Grey LF Range taking and self adjusting Just sizes cover from mm to 1mm diameter Ultraviolet and weather resistant Low cost Versatile One piece ingle fixing Cleat Details LF cleats are low smoke and fume emission and zero halogen Coloured grey to distinguish from black coloured Telcleat Meets requirements of B and LUL specification 1-0 (formerly and E) with regards to temperature index, smoke emission and toxicity ratings Anixter Number Cable Dimensions Accommodated Minimum (mm) Maximum (mm) Black Polythene E1D-A E1D-A0.. E1D-A0 1.. E1D-A E1D-A0 1.. E1D-A0.. E1D-A E1D-A Grey LF E1D-A01LF. 1. E1D-A0LF.. E1D-A0LF 1.. E1D-A0LF 1..0 E1D-A0LF 1.. E1D-A0LF.. E1D-A0LF E1D-A0LF

33 tandard Cable Cleats 1 Anixter can supply a range of inexpensive single or two part cleats manufactured in high strength polypropylene. These provide a high level of resistance to: Impact Corrosive environments Ultra Violet Light Temperature variations, - C to + C Cleat Details ingle Hole Fixing Anixter Number Cleat Range (mm) Two Hole Fixing Anixter Number Cleat Range (mm) CLEAT.1 to. MT 0.0 to.0 CLEAT. to 1. MT.0 to.0 CLEAT 1.1 to 1. MT.0 to 0.0 CLEAT 1. to 0. MT 0.0 to.0 CLEAT 0. to. MT1.0 to.0 CLEAT. to. MT1.0 to.0 CLEAT. to. - - CLEAT. to CLEAT1 0. to. - - CLEAT. to CLEAT 0. to. - - CLEAT0. to

34 1 1 1 Telcleats - Black Polythene and Grey LF Cleat election Chart Cond. ize sqmm Core 1 Core Core Core Core 1. - C C C C C C C C C. - C C C C C C C C C1 - C C C C C C C C C C C C C C C C C C C C C C C C C C1 C C C C1 C C C C C1 C C C C1 C C C C1 C C C C C C C0 MT C C C0 MT C1 C0 MT MT C1 MT MT MT C MT MT MT C MT MT MT Please note that the above chart is a guide, and cable OD should be checked prior to cleat selection. Core Core Core Core Core 1 1 0

35 Claw and Two Bolt Cleats - Aluminium Alloy 1 Claw cleats for cable dimensions up to 1mm diameter Cleat Details Anixter Number Claw Cleats Cable Dimensions Accommodated Minimum (mm) E1B-BA01 1 E1B-BA0 1 E1B-BA0 E1B-BA0 E1B-BA0 E1B-BA0 E1B-BA0 E1B-BA0 E1B-BA0 1 Two Bolt Cleats E1B-BA 1 E1B-BA E1B-BA 0 E1B-BA1 0 E1B-BA1 E1B-BA1 Two bolt cleats for cable dimensions 1mm and above Maximum (mm)

36 1 Cable Management - Cable Ties and Tapes Cable Ties Made from high quality Nylon. Excellent resistance to: Bases, Oils, Greases, Oil Products, Chlorate olvents. Limited resistance to acids UV resistant for outdoor applications Operating temperature -0 C to +0 C Flammability rating UL Class V Dielectric strength 0 kv/mm Anixter Number Cable Ties KCT0-. KCT-. KCT00-. KCT00-. KCT00-. KCT0-. KCT0-. KCT0-.N KCT-.N KCT00-.N KCT00-.N PVC Insulation Tapes PVCTBK PVCTBN PVCTBU PVCTGR PVCTGY PVCTRE PVCTWH PVCTGN PVCTOR PVCTYE Description Cable Tie, length 0mm x width.mm, pack of 0, Black Cable Tie, length mm x width.mm, pack of 0, Black Cable Tie, length 00mm x width.mm, pack of 0, Black Cable Tie, length 00mm x width.mm, pack of 0, Black Cable Tie, length 00mm x width.mm, pack of 0, Black Cable Tie, length 0mm x width.mm, pack of 0, Black Cable Tie, length 0mm x width.mm, pack of 0, Black Cable Tie, length 0mm x width.mm, pack of 0, Natural Cable Tie, length mm x width.mm, pack of 0, Natural Cable Tie, length 00mm x width.mm, pack of 0, Natural Cable Tie, length 00mm x width.mm, pack of 0, Natural PVC Insulation Tape, Black, mm x 0m long PVC Insulation Tape, Brown, mm x 0m long PVC Insulation Tape, Blue, mm x 0m long PVC Insulation Tape, Grey, mm x 0m long PVC Insulation Tape, Green/Yellow, mm x 0m long PVC Insulation Tape, Red, mm x 0m long PVC Insulation Tape, White, mm x 0m long PVC Insulation Tape, Green, mm x 0m long PVC Insulation Tape, Orange, mm x 0m long PVC Insulation Tape, Yellow, mm x 0m long 0

37 Cable Tiles and Warning Tapes Plastic warning cable tiles and warning tapes for buried cables and have the following warning legend: 1 Cable Tile Details Anixter Number WCT Tile Dimensions (mm) 00 x 1 x mm 1 Warning Tape Details Anixter Number HEPT Tape Dimensions (mm) 0mm wide x 0 microns thick (m roll)

38 1 Polyurethane Resin Encapsulation uitable for,, Core XLPE/PVC WA Copper Conductor Cables Joints comply with the requirements of B Part 1, DIN VDE 0 Parts 1,, and, EN 0 and Cenelec HD Transparent shell to allow inspection joint before application of resin. PUJ joints utilise Two-Part Polyurethane resin to encapsulate, insulate and protect the jointed conductors Resin and hardener are separated by a centre peelable seal in Twin Pack Laminated achet (completely enclosed mixing) Unmixed ingredients have shelf life of months based on average UK temperatures All joints supplied with two part shell, resin pack, earth continuity, gloves and sealing tape. Conductor connectors included up to sqmm Anixter Number To uit Conductor ize hell Length Internal Diameter Two Core Three Core Four Core mm mm mm mm mm mm To uit Cable Diameter JK JK JK JK JK JK JK Through Crimps Anixter Number To uit Conductor ize mm Anixter Number To uit Conductor ize mm LUGTC LUGTC0 0 LUGTC LUGTC LUGTC LUGTC LUGTC LUGTC0 0 LUGTC0 0 LUGTC00 00 LUGTC0 0 LUGTC00 00 LUGTC

39 Quick and easy to use, with no requirement for application of heat to effect the joint (no open flames) No special tools required Long term reliability Provides excellent insulating levels One part joint body UV stabilised High track resistance and built in permittivity stress controlling material traight Joint Kits for Three Core Medium Voltage Cables Non-flammable (LOH) and fungus resistant Manufactured from silicone (hydrophobic material) Terminations recover to a uniform wall thickness Joint kit includes copper mesh tape, mastic, Elaspeed joint, x C spanners, EPR tape, x constant force springs, x sealing pads, silicone grease, litres of resin and instructions 1 traight Joint Kit Details Anixter Part Number JK-EJ-XA-A- JK-EJ-XA-B- JK-EJ-XA-C- To uit Three Core kv Polymeric Cable - sqmm - 00sqmm 00sqmm

40 1 Cold hrink Outdoor Terminations for Three Core Medium Voltage Cables These Prysmian manufactured cold shrink outdoor terminations are quick and easy to install, with no requirement for application of heat to effect the termination (no open flames) Long term reliability Provides excellent insulating levels and lower surface stress UV stabilised High track resistance and built in permittivity stress controlling material Non-flammable (LOH) and fungus resistant Manufactured from silicone (hydrophobic material) Terminations recover to a uniform wall thickness Terminations have moulded-in rain sheds Kit includes x sets of terminations, 1 x jointing instruction, 1 x constant force spring, 1 x PVC tape, 1 x silicone mastic, x silicone tape, x silicone grease, 1 x PT tube, 1 x breakout boot and 1 x scotch tape traight Joint Kit Details Anixter Number TERM-COT-X-A- TERM-COT-X-B- TERM-COT-X-C- TERM-COT-X-D- To uit Three Core kv Polymeric Cable - 0sqmm - sqmm 0-00sqmm 00sqmm

41 XLPE or EPR/WA/PVC Cables to B: With Extruded Bedding and Circular/haped tranded Copper Conductors 00/00 V XLPE/EPR Cable Construction Cable Gland/Cleat Type & ize Conductor C..A. (mm ) 1.. Number of Cores CMP Gland election Chart Nominal Diameters (mm) Indoor Outdoor Outdoor Outdoor Unicleat ingle Two Under Overall BW Gland CW Gland E1W Gland E1FW Gland Bolt Bolt Armour Clamp Clamp BW Kit CW Kit / 0/ 0/ Please note that the above chart is a guide and that cable OD should be checked prior to gland selection

42 CMP Gland election Chart (continued) XLPE or EPR/WA/PVC Cables to B: With Extruded Bedding and Circular/haped tranded Copper Conductors 00/00 V XLPE/EPR Cable Construction Cable Gland/Cleat Type & ize Conductor Number Nominal Diameters (mm) Indoor Outdoor Outdoor Outdoor Unicleat ingle Two C..A. of Cores Under Overall BW Gland CW Gland E1W Gland E1FW Gland Bolt Bolt (mm ) Armour Clamp Clamp BW Kit CW Kit Note: For Cables up to sqmm, Conductors are Circular tranded and for cables 0sqmm and over, conductors are haped tranded Please note that the above chart is a guide and that cable OD should be checked prior to gland selection.

43 CMP Gland election Chart 1 elector Chart for GWB or BWB Braid Armour Cable to B: Multipair Instrumentation Cable Rated /0 V XLPE Cable Construction Cable Gland/Cleat Type & ize Conductor C..A. (mm ) Number of Pairs Configuration Nominal Diameters (mm) Outdoor Outdoor Outdoor Outdoor Unicleat ingle Bolt Under Overall CX or CK E1X or TCD PXKX Clamp Armour Gland E1FX Gland Gland Gland Two Bolt Clamp 0. 1 Pr Pr Pr Pr 0 Pr Pr Pr 0. Pr Pr Pr 0 Pr Pr Pr Pr Pr Pr Pr 0 Pr Pr Pr 1.0 Pr Pr Pr 0 Pr Pr Pr Individually creened Pairs Collectively creened Pairs Individually creened Pairs Collectively creened Pairs / 0/ 0/ 0/ / 0/ 0/ 0/ Please note that the above chart is a guide and that cable OD should be checked prior to gland selection. 1 0

44 CMP Gland election Chart (continued) elector Chart for GWB or BWB Braid Armour Cable to B: Multipair Instrumentation Cable Rated /0 V XLPE Cable Construction Cable Gland/Cleat Type & ize Conductor C..A. (mm ) Number of Pairs 0. 1 Tr Tr Tr Tr 0. Tr Tr Tr Tr Tr Tr Tr 1.0 Tr Tr Tr 0. 1 Qd Qds Qds Qd Qds Qds Configuration Nominal Diameters (mm) Outdoor Outdoor Outdoor Outdoor Unicleat ingle Two Bolt Bolt Clamp Under Overall CX or CK E1X or TCD PXKX Clamp Armour Gland E1FX Gland Gland Gland Individually.1. 0/ 0/ 0/ 0/ 1 - creened Triples Collectively creened.. Triples. 0. Individually creened Triples Collectively creened 0.. Triples Individually creened..0 Quads.0. Collectively creened.. Quads Please note that the above chart is a guide and that cable OD should be checked prior to gland selection. 1 0