Repair Parts List WASHER MODEL NUMBER LA8440. When requesting service or ordering parts, always provide the following information:

Size: px

Start display at page:

Download "Repair Parts List WASHER MODEL NUMBER LA8440. When requesting service or ordering parts, always provide the following information:"

Heather Wilkinson
5 years ago
Views:

1 Repair Parts List WASHER MODEL NUMBER LA8440 When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005 Maytag Services

2 Section: CONTROL PANEL Model: LA8440 MA80B13 1

3 Section: CONTROL PANEL No. Part No. Description Series Qty AIR DOME AND TUBE Note: AIR DOME & TUBE A BACK UP PLATE Note: PLATE, BACK UP A SCREW, #8 X 9/16 CTSK Note: SCREW, CONTROL PANEL & END CAP A CAP, KNOB A CLAMP,WATER LEVEL SWTCH TUBE Note: CLAMP, WATER LEVEL SWITCH TUBE A FASTENER, END CAP A INFINITE LEVEL PRESSURE SWITCH Note: SWITCH, INFINITE PRESSURE A SCREW, #8 X 5/16 INCH Note: SCREW (#8 X 5/16 INCH) A PALNUT, END CAP A RETAINER, TIMER KNOB A SPEED CONTROL SWITCH - 2 BUTTO Note: SWITCH, SPEED CONTROL A SCREW-TEMP. SWITCH TO PANEL Note: SCREW, TEMP. SWITCH A SPRING, TIMER KNOB A SCREW-TIMER TO CONTROL PANE Note: SCREW, TIMER A TIMER A TIMER DIAL SKIRT Note: SKIRT, TIMER DIAL A KNOB, TIMER (BLK) A TIMER MOTOR Note: MOTOR, TIMER (120-60) A TEMP CONTROL SWITCH - 3 BUTTON Note: SWITCH, TEMP. CONTROL A SCREW-TEMP. SWITCH TO PANEL Note: SCREW, TEMP. SWITCH A N WIRE HARNESS Note: WIRE HARNESS, MAIN A0 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 2

4 Section: TOP COVER, CONSOLE & LID SWITCH Model: LA8440 MA80C1 3

5 Section: TOP COVER, CONSOLE & LID SWITCH No. Part No. Description Series Qty HINGE, BALL A SCREW A BLOCK, FUSE A BRACKET F/LID SWITCH PLUNGE Note: BRACKET, LID SWITCH PLUNGER A SCREW A0 2 4 N BRACKET, UNBALANCE B SWITCH, CHECK A SCREW A SCREW A SCREW A0 5 6 N L CONSOLE (ALM) Note: (ALM) A0 1 7 N CONVERTER A GROMMET, CORD A FASTENER,CNTRL PNL TO CONSOLE Note: FASTENER, CONTROL PANEL A FUSE A GASKET A CLAMP, GROUND (W/SCREW) A GROUND WIRE A L LID-ALMOND Note: (ALM) A BUMPER, LID A SWITCH, LID (W/O TUB LIGHT) A SCREW, #6-20 X 1-1/8 INCH Note: SCREW (#6-20 X 1-1/8 INCH) A N KIT, PLUNGER & BRACKET B N LID SWITCH PLUNGER Note: PLUNGER, LID SWITCH A WASHER,BRACKE TO TOP COVER Note: WASHER, BRACKET A NON-BLEACH CONVERSION KIT Note: KIT, NON-BLEACH CONVERSION A SCREW, GROUND WIRE TO BASE--NA Note: SCREW, GROUND WIRE A POWER CORD Note: CORD, POWER A SPRING A SCREW A BRACKET,SWITCH & FUSE Note: BRACKET, SWITCH & FUSE A SCREW, GROUND WIRE TO BASE--NA Note: SCREW, GROUND WIRE A N L TOP COVER ASSY ALM----NA Note: (ALM) A SCREW & FASTENER ASY. Note: ASSEMBLY, SCREW & FASTENER A UNBALANCE LEVER Note: LEVER, UNBALANCE A0 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 4

6 Section: CABINET, WATER VALVE, HOSES & FRNT PANEL Model: LA8440 MA80C5 5

7 Section: CABINET, WATER VALVE, HOSES & FRNT P No. Part No. Description Series Qty 1 N PLATE, ACCESS A SCREW A GUARD, BELT A SCREW A BRACKET,WATER VALVE Note: BRACKET, WATER VALVE A SCREW A PAD, CABINET BUMPER A SCREW,CBNT.TO FRNT OF BASE--NA Note: SCREW, CABINET A SCREW A0 3 5 N L (ALMOND) Note: (ALM) A SCREW & FSTNER ASSY(FRT.PANEL) Note: ASSEMBLY, SCREW & FASTNER A SCREW, CABINET A CAPACITOR A CAPACITOR KIT Note: KIT, CAPACITOR A CLIP, CAPACITOR A CARTON OF 25 HOSE, 5' Note: CARTON OF 25 HOSES (5' FT.) A N (7/8" I.D. CARTON OF 50 FT.) A HOSE, DRAIN A HOSE, DRAIN (7/8"I.D.) A L FRONT PANEL-ALMOND Note: (ALM) A GASKET, SIPHON BREAK Note: GASKET, SIPHON BREAK A HOSE CLAMP - 1-5/8 INCH Note: CLAMP, HOSE (1-5/8 INCH) A HOSE CLAMP - 1-1/2 INCH Note: CLAMP, HOSE (1-1/2 INCH) A HOSE CLAMP Note: CLAMP, HOSE A HOSE,PUMP TO SIPHON BREAK Note: HOSE, PUMP A INLET HOSE ASSY. Note: ASSEMBLY, INLET HOSE A HOSE, INLET ASSY. Note: HOSE, INLET ASSEMBLY A INLET HOSE, HOT 6 FT. Note: HOSE, INLET (HOT 6 FT.) A INLET HOSE, HOT 10 FT. Note: HOSE, INLET (HOT 10 FT.) A INLET HOSE ASSY. Note: ASSEMBLY, INLET HOSE A SCREEN, VALVE A #17 WIRE WITH TERMINAL Note: #17 WIRE W/TERMINAL A SCREEN WASHER, INLET HOSE A SCREW A SIPHON BREAK(W/CLAMP) Note: BREAK, SIPHON (W/CLAMP) A ELBOW, SIPHON BREAK Note: ELBOW, SIPHON BREAK A SIPHON BREAK ELBOW Note: ELBOW, SIPHON BREAK A SPACER, FRONT PANEL Note: SPACER, FRONT PANEL A FASTENER, PANEL A GASKET, INLET HOSE Note: WASHER, INLET HOSE A WATER VALVE Note: VALVE, WATER A SCREW A HOSE COUPLING Note: COUPLING, HOSE A0 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 6

8 Section: TUB, AGITATOR, MOUNTING STEM & SEAL Model: LA8440 MA80C7 7

9 Section: TUB, AGITATOR, MOUNTING STEM & SEAL No. Part No. Description Series Qty AGITATOR W/LOCK SCREW AIR DOME AND TUBE LINER, TUB BEARING BOLT & GASKET ASSY.(SHORT) BOLT & GASKET ASSEMBLY (LONG) NUT & BOLT KIT FOR TUB CLAM Note: NUT & BOLT KIT, TUB CLAMP UNBALANCE BUMPER Note: BUMPER, UNBALANCE CLAMP, 1-1/16" Note: CLAMP (1-1/16") CLAMP - TUB COVER Note: CLAMP, TUB COVER CLAMP,WATER LEVEL SWTCH TUBE Note: CLAMP, WATER LEVEL SWITCH TUBE NUT, CLAMPING (INNER TUB) SPOUT, DEFLECTOR DISPENSING CUP Note: CUP, DISPENSING HOSE, OUTER TUB TO PUMP Note: HOSE, OUTER TUB CLAMP, SPRAY ARM HOSE HOSE CLAMP Note: CLAMP, HOSE HOSE CLAMP - 1-1/16 INCH Note: CLAMP, HOSE (1-1/16 INCH) CLAMP, HOSE Note: CLAMP, HOSE CLAMP - 15/16" Note: CLAMP, BLEACH HOSE INJECTOR FILL HOSE Note: FILL HOSE, INJECTOR HOSE, INJECTOR Note: HOSE, INJECTOR INJECTOR NOZZLE Note: NOZZLE, INJECTOR INJECTOR TUBE Note: TUBE, INJECTOR N INNER TUB W/PLUG N INNER TUB Note: PART NOT USED LINT FILTER SHALLOW Note: FILTER, LINT (SHALLOW) RETAINING RING WASHER, LOCK MOUNTING STEM Note: STEM, MOUNTING MOUNTING STEM REPAIR KIT Note: KIT, MOUNTING STEM REPAIR TUB, OUTER WASHER,RETAINING(CENTER SEAL)- Note: WASHER, RETAINING SCREW & WASHER FOR AGITATOR Note: SCREW & WASHER, AGITATOR SEMS SCREW, #10-16 X 1/2" Note: SEMS SCREW (#10-16 X 1/2") SET SCREW, MTG. STEM Note: SET SCREW, MOUNTING STEM SEAL A4298 SEAL, AGITATOR DRIVE SHAFT SEAL AND SPRING Note: SEAL & SPRING SEAL FOR INJECTOR TUBE Note: SEAL, INJECTOR TUBE SLEEVE FOR INJECTOR Note: SLEEVE, INJECTOR SPRING HOSE CLAMP Note: CLAMP, SPRING HOSE BEARING, TUB TUB BEARING REPAIR KIT Note: KIT, TUB BEARING REPAIR TUB COVER Note: COVER, TUB TUBE, INLET TO TUB Note: TUBE, INLET VALVE FOR INJECTOR SUB Note: VALVE, INJECTOR WASHER,CLAMPING NUT(STAINLESS) Note: WASHER, CLAMPING NUT WASHER, CUSHION WATER VALVE Note: VALVE, WATER 00 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 8

10 Section: ORBITAL TRANSMISSION Model: LA8440 MA80C11 9

11 Section: ORBITAL TRANSMISSION No. Part No. Description Series Qty AGITATOR W/LOCK SCREW A SCREW & WASHER FOR AGITATOR Note: SCREW & WASHER, AGITATOR A SHAFT, AGITATOR (W/SPRING) A GEAR, BEVEL A0 1 4 N SHAFT, CENTER A COLLAR, LOWER A DISPENSING CAP Note: PART NOT USED A DISPENSING CUP Note: PART NOT USED A PULLEY, DRIVE A LINT FILTER SHALLOW Note: FILTER, LINT (SHALLOW) A SEAL, LIP (CENTER SHAFT) A PIN, COLLAR A PINION A PLATE, CLUTCH A SEAL, RUBBER A SILASTIC,ADH.SEALANT Note: SILASTIC, ADH. SEALANT A SPRING, AGITATOR SHAFT A LUG, STOP A SCREW,STOP LUG(CENTER SHAFT) Note: SCREW, STOP LUG (CENTER SHAFT) A BLOCK, TORQUE AND YOKE ASSEMBL A TRANSMISSION A SCREW, TRANSMISSION COVER A COVER, TRANSMISSION A HOUSING, TRANSMISSION A WASHER, BEVEL GEAR A WASHER, LOCK A WASHER, SPLINED A0 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 10

12 Section: BASE, PUMP, MOTOR & COMPONENTS Model: LA8440 MA80C13 11

13 Section: BASE, PUMP, MOTOR & COMPONENTS No. Part No. Description Series Qty LEG, ADJUSTABLE (W/NUT) A BASE WITH DAMPER PADS Note: BASE W/DAMPER PADS A SCREW, HEX HD CAP 5/16 X 5/8 A BOLT & GASKET ASSEMBLY (LONG) A BOLT & GASKET ASSY.(SHORT) Note: ASSY., BOLT & GASKET (SHORT) A BRACE, TUB A CENTERING SPRING - 3 USED Note: SPRING, CENTERING A DAMPER W/BOLT & CLIP A DAMPER PAD KIT (W/POLY LUBE) A WASHER, DOUBLE Note: WASHER, DOUBLE A HOSE,PUMP TO SIPHON BREAK Note: HOSE, PUMP A EYE BOLT FOR CENTER SPRING Note: EYE BOLT, CENTER SPRING A GRND.WIRE,SUPP.PLTE TO TOP CVR Note: GROUND WIRE, SUPPORT PLATE A SCREW, GROUND WIRE TO BASE--NA Note: SCREW, GROUND WIRE A HOSE, OUTER TUB TO PUMP Note: HOSE, OUTER TUB A HOSE CLAMP - 1-5/8 INCH Note: CLAMP, HOSE (1-5/8 INCH) A CLAMP, HOSE Note: CLAMP, HOSE A NUT, WASHERED LOCK Note: KEPS NUT, MOTOR BASE A LOWER MOTOR MOUNT Note: MOTOR MOUNT, LOWER A SET SCREW, PULLEY A PULLEY, MOTOR (W/SET SCREW) A MOTOR (ONE SPEED) Note: PART NOT USED A MOTOR - TWO SPEED Note: MOTOR, TWO SPEED A MOTOR MOUNT ASSM COMPLETE Note: ASSY, MOTOR MOUNT (COMPLETE) A MOTOR EXTERNAL START SWITCH Note: SWITCH, EXTERNAL MOTOR START A SWITCH, MOTOR START Note: SWITCH, EXTERNAL MOTOR START A SWITCH, MOTOR START Note: SWITCH, EXTERNAL MOTOR START A N MOTOR EXTERNAL START SWITCH Note: SWITCH, EXTERNAL MOTOR START A N MOTOR EXTERNAL START SWITCH Note: SWITCH, EXTERNAL MOTOR START A SWITCH, MOTOR START Note: SWITCH, EXTERNAL MOTOR START A SCREW A SHIELD, MOTOR A NUT Note: NUT, BRACE TO TUB A NUT,BRACE TO DAMPER Note: NUT, BRACE TO DAMPER A NUT, LOCK A NUT, EYEBOLT A PUMP AS PAK A SCREW, HEX HD #10 X 1/2 INC Note: SCREW (HEX HD #10 X 1/2 INC) A SCREW, BEARING INSERT A GLIDE KIT (4 W/POLY LUBE) Note: KIT, GLIDE (4 W/POLY LUBE) A GLIDE & SPRING KIT Note: KIT, GLIDE & SPRING A FOOT, RUBBER A TENSION SPRINGS Note: SPRINGS, TENSION A TRANSMISSION A MOUNT, MOTOR/UPPER Note: PLATE, MOTOR MOUNT (UPPER) A WASHER, LOCK A WASHER, CUSHION A WASHER, TUB BRACE A WASHER, LOCK (BRACE) A DEFLECTOR,WATER (DRIVE TUBE) Note: DEFLECTOR, WATER (DRIVE TUBE) A0 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 12

14 Section: CLUTCH, BRAKE & BELTS Model: LA8440 MA80D3 13

15 Section: CLUTCH, BRAKE & BELTS No. Part No. Description Series Qty BALL BEARING, RADIAL A BEARING, BRAKE ROTOR A SCREW,HEX HEAD (BRAKE DRUM) Note: SCREW, HEX HEAD (BRAKE DRUM) A DRUM, BRAKE A HOUSING, BRAKE A BRAKE ASSEMBLY Note: PACKAGE, BRAKE A ROTOR, BRAKE (W/FACING) A PULLEY, DRIVE A GASKET, BRAKE DRUM A PULLEY, MOTOR (W/SET SCREW) A SET SCREW, PULLEY A N CAP, OIL RETAINER A RETAINER, BRAKE SPRING A CLIP, RETAINER A SCREW,STOP LUG(CENTER SHAFT) Note: SCREW, STOP LUG A SCREW, RETAINING CLIP Note: BOLT, RETAINING CLIP A LUG, STOP A SPRING, BRAKE A TOOL, BRAKE PKG ASSY Note: TOOL, BRAKE PKG. ASSEMBLY A V BELT, PUMP A V BELT,DRIVE PULLEY Note: V BELT, DRIVE PULLEY A WASHER, LOCK A0 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 14

Repair Parts List WASHER MODEL NUMBER LAT9334AAE. When requesting service or ordering parts, always provide the following information:

Repair Parts List WASHER MODEL NUMBER LAT9334AAE When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005