OCTA LUMINA ILLUMINATED FRAMES WITH A SYSTEM TECHNIC 09/17

Transcription

1 OCTA LUMINA ILLUMINATED FRAMES WITH A SYSTEM 80 TECHNIC 09/17

2 UPDATE VERSION 2.0 NEW ARTICLE frame connector OL 238 DISCONTINUED ARTICLE LED PSU slim OL 104 LED PSU slim OL 106 TECHNICAL INFO OCTAlumina wire rope retainer OTHER warranty safety instructions 2

3 CONTENTS OCTALUMINA 80 SINGLE-SIDED BASIC ELEMENTS 4 BRACING 6 ACCESSORIES 7 ELECTRICAL PARTS 10 PACKING 20 TECHNICAL INFORMATION 21 WARRANTY AND SAFETY INSTRUCTIONS 25 3

4 BASIC ELEMENTS FRAME PROFILE 80 SINGLE-SIDED M Aluminium for single-sided illumination, graphics with silicone edge M kg 6000 mm 80S Z 966 M 1965B 80 M 1935 INTERNAL CORNER CONNECTOR FOR M 1935 / U 1060 M 1965B.00 Zinc die-cast with 2 E 111 countersunk screws, for M 1935 frame profile with mm tension lock chamber 0.05 kg Z S PLS M 1935 M 1965B Also available in aluminium as M 1965 INTERNAL CORNER CONNECTOR FOR M 1935 Z Aluminium with 2 E 111 and E 111/20 countersunk screws, for extrusions with mm tension lock chamber 0.08 kg 80S Z 966 M 1965B M mm without groove

5 BASIC ELEMENTS CONNECTOR FOR M 1925 AND M 1935 M Aluminium with 2 E 111/m (M6) countersunk screws, for lateral connection of M 1925 and M 1935 frame profiles with mm tension lock chamber 0.09 kg M S M 1967 M 1935 CONNECTOR FOR M 1935 M Aluminium with 2 E 111/m (M6) countersunk screws, for lateral connection of M 1935 frame profile with mm tension lock chamber 0.09 kg M S M 1967 M mm without groove

6 BRACING EXTRUSION BRACING FOR M 1915 AND M 1935 Z Aluminium, white Installation of Z 961/13 tension lock possible, mm 3.38 kg l 5000 mm 80E 120E PLS TENSION LOCK 13 MM Z 961/13.00 Zinc die-cast/steel for all profiles with mm lock chamber or in connection with Z 161/A adapter for profiles with mm lock chamber 0.05 kg 80S 120S CUB PLS CONNECTOR FOR Z 4400 Z Aluminium/Spring steel with push button retention for toolless mounting, for all extrusions with mm lock chamber and Ø 13 mm drilling 0.11 kg Ø13 Ø13 80S 120S PLS Z mm without groove

7 ACCESSORIES BASE PLATE OL Steel for free-standing walls, with connection set OL 215, maximum frame height 2500 mm 3.78 kg OL S S COR OL 200 SLOT NUT FOR BASE PLATE OL Aluminium for base plate OL kg 80S 120S 120 COR M6 M6 M ,9 5,8 OL 215 OL 200 ADJUSTABLE FOOT W Aluminium M10 thread, to adjust height for frames, adjustable from the top 0.11 kg W mm without groove

8 ACCESSORIES W MOUNTING S ET M8 Steel to connect two OCTAlumina frames 0.03 kg CORNE R E XTRUSION M Aluminium 1 extrusion manufacture from 80 mm square extrusion M 1020, 2480 mm 80S FRAME CONNE CTOR OL Steel zfor 90 connection of 2 OCTAlumina 80 frames without corner upright, with 2 hammehead screws M 1472 and 1 fixing set W kg OL E 55 Fabric has to be cut in the area of the connection mm without groove CUB cube PLS plus

9 ACCESSORIES EYE BOLT FOR CEILING SUSPENSION OL Steel for vertical ceiling suspension 0.06 kg UNIVERSAL RETAINER SINGLE-SIDED OL Steel for single sided frames, for wall mounting and horizontal ceiling suspension, with eye bolt, can be used with M 1915 and M kg Ceiling suspension Deckenabhängung OL S 120S PLS After removing the eye bolt, the OL 234 can be used for wall mounting mm without groove

10 ELECTRICAL PARTS CONNECTION CABLE FOR LED PSU OL 98 / OL 100 / OL 102 / OL 108 OL Plastic, white with Schuko plug (country-specific plugs available on request) 2000 mm lang 40 40G 80S 120S 120 COR CUB PLS MULTIPLIER 250 V / 16 A OL Plastic, white 3-pole, 1 input/2 output for connection of 2 OL 100 and/or OL 102 PSUs to the 2 m long OL 122 cable 0.01 kg 40 40G 80S 120S 120 COR CUB PLS FEMALE PLUG 250 V / 16 A OL Plastic, white 3-pole, with strain relief, for DIY assembly of OL 122 connection cable 0.01 kg 40 40G 80S 120S 120 COR CUB PLS mm without groove

11 ELECTRICAL PARTS MALE PLUG 250 V / 16 A OL Plastic, white 3-pole, with strain relief, for DIY assembly of OL 98 / OL 100 / OL 102 / OL 104 / OL 106 / OL 108 PSUs 0.01 kg 40 40G 80S 120S 120 COR CUB PLS BRACKET FOR PSU OL Steel, white with 2 OL 252 mounting sets to mount PSUs OL 98 / OL 100 / OL 102 at a 90 angle, for M 1915 and M kg WALL POWER SUPPLY OL Plastic, black Input: V AC, 50/60 Hz Output: 24 V DC, 1,0 A, 24 W 0.14 kg 40 40G 80S 120S 120 CUB PLS Attention: OL 149 necessary! mm without groove

12 ELECTRICAL PARTS LED POWER SUPPLY UNIT 60 W / 100 W / 150 W / 240 W OL Input: V AC, 50/60 Hz Output: 24 V DC, 2,5 A, 60 W plug connection at both ends, includes 2 OL 252 mounting sets 0.67 kg 40 40G 80S 120S 120 COR CUB PLS OL 108 M 1901 OL Input: V AC, 50/60 Hz, Output: 24 V DC, 4,16 A, 100 W plug connection at both ends, includes 2 OL 252 mounting sets 0.92 kg 40 40G 80S 120S 120 COR CUB PLS OL Input: V AC, 50/60 Hz Output: 24 V DC, 6,25 A, 150 W plug connection at both ends, includes 2 OL 252 mounting sets 1.05 kg 40 40G 80S 120S 120 COR CUB PLS OL Input: V AC, 50/60 Hz Output: 24 V DC, 10,0 A, 240 W plug connection at both ends, includes 2 OL 252 mounting sets 1.22 kg 40 40G 80S 120S 120 COR CUB PLS mm without groove

13 ELECTRICAL PARTS PWM DIMMER OL Control unit & remote, voltage: 8-24 V, for normal and PWM dimming of OCTANORM LED Modules, Channels: 6, max. 3 A per channel 0.14 kg 40 40G 80S 120S 120 ECK CUB PLS CONNECTION CABLE 1000 / 3000 MM OL Plastic, white one side fitted with a plug for extension if distance between LED power supply and LED module is too big Length: 1000 mm 40 40G 80S 120S 120 COR CUB PLS Attention! After adjusting the cable length, the plug OL 148 has to be attached on the other side! OL Plastic, white one side fitted with a plug for extension if distance between LED power supply and LED module is too big Length: 3000 mm 40 40G 80S 120S 120 COR CUB PLS 3000 Attention! After adjusting the cable length, the plug OL 148 has to be attached on the other side! mm without groove

14 ELECTRICAL PARTS EXTENSION CORD 24 V 300 / 500 / 1000 / 3000 MM OL Plastic, white with plug on one side, additional power source if series connection of LED modules exceeds 100 W Length: 300 mm 300 Attention! After adjusting the cable length, the plug OL 148 has to be attached on the other side! OL Plastic, white with plug on one side, additional power source if series connection of LED modules exceeds 100 W Length: 500 mm 500 Attention! After adjusting the cable length, the plug OL 148 has to be attached on the other side! OL Plastic, white with plug on one side, additional power source if series connection of LED modules exceeds 100 W Length: 1000 mm Attention! After adjusting the cable length, the plug OL 148 has to be attached on the other side! OL Plastic, white with plug on one side, additional power source if series connection of LED modules exceeds 100 W Length: 3000 mm 3000 Attention! After adjusting the cable length, the plug OL 148 has to be attached on the other side! mm without groove

15 ELECTRICAL PARTS MALE PLUG 24 V / 16 A OL Plastic, blue/white 2-pole, with strain relief, for DIY assembly of 24 V OL 131 / OL 133 / OL 135 / OL 137 connection cable 0.01 kg 40 40G 80S 120S 120 COR CUB PLS FEMALE PLUG 24 V / 16 A OL Plastic, blue/white 2-pole, with strain relief, for DIY assembly of OL 98 / OL 100 / OL 102 / OL 104 / OL 106 / OL 108 power supply units, or 24 V OL 139 / OL 140 connection cable 0.01 kg 40 40G 80S 120S 120 COR CUB PLS MULTIPLIER 24 V / 16 A OL Plastic, blue 2-pole, 1 input/2 output, for connection of 2 OL 123 / OL 125 / OL 127 / OL 129 LED modules 0.01 kg 80S 120S 120 COR CUB PLS mm without groove

16 ELECTRICAL PARTS LED-MODULE OL LEDs per unit, 6,5 W / 24 V, 6000 K, 618 lm, with plug-in wiring, includes 2 OL 252 mounting sets, with constant current power supply 0.06 kg OL 123 OL LEDs per unit, 10,5 W / 24 V, 6000 K, 1081 lm, with plug-in wiring, includes 2 OL 252 mounting sets, with constant current power supply 0.09 kg OL LEDs per unit, 13,5 W / 24 V, 6000 K, 1390 lm, with plug-in wiring, includes 3 OL 252 mounting sets, with constant current power supply 0.12 kg OL LEDs per unit, 19,5 W / 24 V, 6000 K, 2008 lm, with plug-in wiring, includes 3 OL 252 mounting sets, with constant current power supply 0.15 kg mm without groove

17 ELECTRICAL PARTS U-SCREEN FÜR LED-MODULE OL Aluminium, white to screen of lateral light from OL kg l 240 mm 30,8 240 OL 273 OL Aluminium, white to screen of lateral light from OL kg l 400 mm 30,8 400 OL Aluminium, white to screen of lateral light from OL kg l 560 mm 30,8 560 OL Aluminium, white to screen of lateral light from OL kg l 720 mm 30, mm without groove

18 ELECTRICAL PARTS DIFFUSOR RING FOR LED MODULE OL Plastic, translucent white to clip on OL 123 / OL 125 / OL 127 / OL 129 LED modules, to optimize light dispersion, highly recommended for light graphics LED module CABLE PROTECTION GROMMET OL Rubber, black for cable outlets in M 1901 frames, 1 pair (1 outer / 1 inner) 0.01 kg OL 115 M 1901 Attention! Oval drilling necessary! COVER PLUG M Plastic, light grey to cover drill holes with a diameter of 8 mm 0.01 kg 80E 120E 120 ECK CUB PLS mm without groove

19 ELECTRICAL PARTS MOUNTING SET OL Steel/Plastic for mounting OL 123 / OL 125 / OL 127 / OL 129 LED modules and OL 98 / OL 100 / OL 102 / OL 108 power supply units on M 1901 frame profile 0.01 kg 80S 120S 120 PLS ADHESIVE BASE OL Plastic, white to attach cable to frame profile with OL 255 cable tie (not included), max. width of cable tie 4 mm Packaging unit 100 pieces Weight per unit: 0.07 kg 40 40G 80S 120S 120 COR CUB PLS CABLE TIE OL Plastic, white 2,5 mm wide, 155 mm long Packaging unit 100 pieces Weight per unit: 0.05 kg 40 40G 80S 120S 120 COR CUB PLS mm without groove

20 PACKING SHAPED FOAM INLAY FOR M 1935 OL for safe transportation of M 1935 frame profiles with mounted LED modules Length: 105 mm 0.04 kg 80S ENDLESS CARDBOARD FOR M 1935 OL fits 4 M 1935 frame profiles fitted with LED modules when using OL 996 moulded foam parts 320 rm/palet Weight per palet: kg 80S mm without groove

21 OCTALUMINA 80 AND 120 CONNECTION DIAGRAM FOR ELECTRONICS TECHNICAL INFORMATION Extension cord: OL mm OL mm OL mm OL mm * Connection Cable: OL mm OL mm Plug: OL 149 Plug: OL 148 Multiplier: OL 150 LED module: OL 125 Cable: OL 122 * Power Supply Unit: OL W OL W OL W OL W OL W (Slim Line) OL W (Slim Line) For longer life expectancy, we recommend to only use 80% of the PSU's maximum capacity Plug: OL 148 Extension cord: OL mm OL mm OL mm OL mm * = max. performance per LED module arrangement: 100W If the performance exceeds 100W, an additional infeed is necessary using extension cord OL 131,... and the OL 148 plug Performance per module: OL 123: 6,5W OL 125: 10,5W OL 127: 13,5W OL 129: 19,5W LED module: OL 127 TI TIOL12C E A-T01 C Subject to change 21

22 ASSEMBLY INSTRUCTION OCTALUMINA 120 / 80 ILLUMINATION ON ONE SIDE TECHNICAL INFORMATION 1. assembly of base plate OL frame assembly 3. cabling in corners 1a. alternative assembly of adjustable foot W 2850 Z 965B M check functioning of LED!

23 ASSEMBLY INSTRUCTION OCTALUMINA 120 ILLUMINATION ON ONE SIDE TECHNICAL INFORMATION 4. assembly of bracing 5. assembly of fabrics Subject to change Detail A Detail B Detail C position of bracing at the frame Z 4400 Z 4400 Z 4400 bracing Z 4400 frame extrusion M

24 OCTALUMINA WIRE ROPE RETAINER - USAGE OL 220/OL 222 TECHNICAL INFORMATION wire rope nith clevis head or loop end required max. load: 40kg nire rope nith open end required; rope diameter 1.5mm - 2.5mm max. load 20kg/Ø1.5mm - 40kg/Ø2.5mm OL 220 extrusion processing for OL 220 and OL 222 OL Ø20 Ø8, Ø

25 WARRANTY LED products and accessories OCTANORM offers the following warranties on all LED products installed in the OCTAlumina series, if the installation was performed by OCTANORM : LED modules: 2 years Information about the warranty for the power supply units of the HLG series can be found on the datasheet supplied by the manufacturer Mean Well (see Warranty service includes free replacement of the faulty item (excluding assembly work, reconstruction costs, and other services). Improper handling will invalidate the warranty. On the following pages please find further information and technical data about our products. Filderstadt, April 2017 OCTANORM -Vertriebs-GmbH mm without groove

26 INSTALLATION LED modules and PSU 1. Properly clean the mounting surface before installing the product. 2. Make sure the polarity of all connections (LEDs and PSU!) are right, otherwise the LEDs won t illuminate or might get damaged. 3. The connection named DIM has to be properly connected to avoid damaging the product! (If the product won t be connected to a dimmer, cut off the DIM wire and isolate the remaining bit). 4. The wires are connected properly to the PSU if they can t be pulled out manually. 5. The maximum power of the connected modules mustn t exceed 100 W! 6. The supply line between the power supply and LED bar mustn t be longer than 0.5 m if the maximum number of modules is connected! If this is the case, the supply line has to have a cross-section of 1 mm Only use PSUs with a safety certificate and 24 V DC output voltage (± 5% tolerance. Needs short-circuit protection, overvoltage protection, and excess current protection). 8. The PSU should always supply 20% more power than the rated output off all installed modules. WARNING: The indoor version mustn t be used in a humid environment! It is forbidden to take apart or modify the module! Never install the module while it is connected to a live wire! Mounting and maintenance is only to be carried out by qualified personnel! Please check if the voltage is right (24 V) and if all cables are connected correctly before turning on the modules! mm without groove

27 LED-MODULES General information OCTAlumina LEDs were specifically designed to illuminate double or single-sided light boxes. The High-Power-LEDs are mounted in the lateral system grove of the OCTAlumina frame. From there, the supplied optics ensure a homogenous illumination of the area. ADVANTAGES: Special optics equipped with lenses for high light and power efficiency (85 lm/watt) 50% less energy usage compared to fluorescent tubes Infinitely variable Easy mounting due to predrilled holes Power supply with constant current technology, ensuring a longer lifespan and even illumination without brightness fluctuations Can be connected to any common LED power supply unit with constant current technology TECHNICAL DATA: Protection class: IP 33 Colour Rendering Index (CRI): > 80 Voltage: 24 V Operating temperature: -25 C bis +60 C LED PRODUCTS: LIGHT COLOUR 6500 K, 24 V Rigid Sidebar OL OL 112 Rigid Sidebar OL OL 129 Rigid Sidebar OL OL 312 Lighting element cone shaped OL 680 Stripe OL 682 Stripe OL 685 LED PRODUCTS: RGB, 12 V 3-point LED Module OM 103 Stripe OM mm without groove

28 SAFETY INSTRUCTIONS OCTAlumina OCTAlumina products are designed as lightboxes for silicon edge graphics. Their intended use is the illumination of graphics printed on fabric. In case of damage to persons or property due to mishandling and/or wrong installation of the product, any use other than the aforementioned, or nonobservance of these safety instructions, OCTANORM does not assume liability. Noncompliance also results into expiration of all warranty claims. We do not assume liability for any subsequent damage. The product must not be used without silicon edge graphics mounted (blinding danger). The product must be closed on all sides before use. The LED modules have to be fully covered. Do not dispose of the product in normal waste. Please refer to local laws and regulations when disposing of this product mm without groove

29 SAFETY INSTRUCTIONS OCTAlumina Only use the product in dry, dust-free environments. The product is approved for temperatures between -25 C and +45 C. The product must not be used in indoor swimming pools (chloric atmosphere) or places with high corrosion potential (seawater or other atmospheres with high salt content). When disassembled, the profiles have sharp corners (risk of injury!). Please wear adequate protective clothing. Do not put any additional weight on the product and do not lean on the product. If in doubt about the safety, connection, and/or proper use of the product please contact a specialist or your seller. All electrical components have to be checked for possible damage before use. Do not use the product if there is any visible damage or you observe malfunctions. Do not change or alter the product. If a component (e.g. LED module, PSU) is faulty, please use only official OCTANORM spare parts. Installation on primary and/or secondary power lines only after turning off the power. All usual health and safety regulations apply. Secondary 24 V AC power lines must not touch any primary power lines. The product should only be cleaned with a clean, dry cloth. Storage (e.g. when not used) only in closed, dry areas mm without groove

30 OCTANORM Germany Head Office Raiffeisenstraße Filderstadt T F info@octanorm.de EUROPE OCTANORM Belgium T OCTANORM France T OCTANORM UK T OCTANORM Hellas T OCTANORM Italia T OCTANORM Nederland T OCTANORM Polska T OCTANORM Adria T OCTANORM Espana T OCTANORM Nordic T OCTANORM Russia T AMERICA OCTANORM Canada T OCTANORM USA T OCTANORM México T OCTANORM Brasil T OCTANORM Argentina T AFRICA OCTANORM South Africa T MIDDLE EAST OCTANORM Emirates T AUSTRALIA OCTANORM Australia T ASIA OCTANORM Japan T OCTANORM China T AW 7958_80.GB_OCTALUMINA TECHNICAL INFO_09/2017