DATA SHEET GIP LED extrusion article number B4574

Transcription

1 1/1 DATA SHEET GIP LED extrusion article number B4574 Product characteristics The extrusion is made from high quality, double-anodized aluminum, designed for a maximum of two flexible or rigid LED strips that are 8-10 mm wide. LEDs can be hidden behind a cover in the semicircular shape G-L or square shape G-K, made of polymethyl methacrylate. Standard polypropylene end caps are used for the extrusion as supplementary accessories. End caps protect the extrusion from dust and other undesirable elements, which can make LED strips dirty and consequently deteriorate the lighting parameters. The extrusion can be mounted to surfaces with the use of double-sided adhesive tape, mounting glue or screws which guarantee easy and secure mounting of the extrusion to a desired surface. Installation of the profile in drywall is performed using special GP mounting springs. If you would like to mount a profile in an Armstrong drop ceiling with the use of GP springs, then safety washers (42712) are recommended. Additionally, it can be mounted in the TEKNIK profile, using dedicated fasteners (we recommend three pairs per meter of the profile). The TEKNIK profile allows for the construction of precise slots (grooves) in the surfaces of walls and drywall ceilings. ZM connectors are used for straight (ZM-180) and angle connections of KLUŚ profiles fitted with a small fastener and to stabilize the ends of the profiles mounted in lines. (in a plane parallel to the cover, at an angle of 90 O and 135 O - ZM-90 and ZM-135, as well as in a plane perpendicular to the cover at the angle of 90 O and 135 O - ZMPION-90 and ZMPION-135) For mounting and power supply of extrusions, the elements from the mounting system can be used together with the optional accessories presented on. Applications The architectural extrusion with the LED light source is ideal for creating light illuminations indoors. The possibility of getting a single line of light, thanks to a frosted cover, makes this extrusion fit all kinds of arrangements. Due to the possibility of installing two strips inside the extrusion, it can be used as a primary, energy-efficient light source. Products related to the Extrusion extrusion TEKNIK (B5555) ½ drywall TEKUS (B6638) 5/8 drywall cover type G - L frosted (00413) clear matte (17008) clear (17006) cover type G - K clear matte (00415) frosted (17007) end cap GIP - L without hole (00306) end cap GIP - L without hole (00307) TEKNIK clip (24003) spring GP (00293) washer (42712) mounting Bracket (24143) Adjustable mounting bracket (24155) Customer Service: sophia@klusdesign.com / (Ph.) ,

2 2/1 DATA SHEET GIP LED extrusion article number B4574 Technical specification Ingress Protection Rating IP 20 Product Number B4574_1 (34.9 ) B4574_2 (78.7 ) Material body aluminum, cover poly (methyl methacrylate) PMMA, end cap polypropylene (PP), latch polyoxymethylene (POM), spring, connector steel **sample item from the mounting system of profiles Customer Service: sophia@klusdesign.com / (Ph.) ,

3 Basic fixture components GIP Extrusion GIL End Cap GIL End Cap LED strip G-L Cover Wiring diagram LED fixture 120 AC 12V or 24V Made in USA

4 Mounting Instruction Mounting of the GIP extrusion to a surface (drywall, wood etc) with the use of GP surface mounting springs V or 24V 120 AC GP surface spring ø 0.39 (ø 10 mm) 3. a. 12,5 mm (0.49 ) *fixture cable options b

5 Mounting Instruction Mounting the GIP extrusion to a drop ceiling with the use of GP mounting springs V or 24V 120 AC ø 0.39 (ø 10 mm) plastic base GP surface spring 3. *fixture cable options a. plastic base b

6 Mounting Instruction Mounting the GIP extrusion to drywall with the use of the TEKNIK mounting extrusion. 1. mounting the profile TEKNIK with the support structure of the ceiling to power supply 2. TEKNIK clip 3 pairs of TEKNIK clips per 1 meter 3. a. *fixture cable options b.

7 Fixture cable options 36 36F Female end 72F Male end 36F 72F Wire end *Examples of attaching a KLUS fixture to the power supply to power supply to power A B supply C to power supply female end male end custom connection male end female end