OCTA LUMINA CUBE TECHNIC 09/17 ILLUMINATED FRAMES WITH A SYSTEM

Transcription

1 OCTA LUMINA ILLUMINATED FRAMES WITH A SYSTEM E TECHNIC 09/17

2 UPDATE VERSION 2.0 DISCONTINUED ARTICLE LED PSU slim OL 104 LED PSU slim OL 106 TECHNICAL INFO OCTAlumina mounting cube OTHER warranty safety instructions

3 CONTENTS OCTALUMINA E BASIC ELEMENTS 4 ACCESSORIES 5 ELECTRICAL PARTS 8 TECHNICAL INFORMATION 17 WARRANTY AND SAFETY INSTRUCTIONS 25 3

4 BASIC ELEMENTS TENSION FABRIC PROFILE E M Aluminium graphics with silicone edge M kg l 6000 mm COR Attention: maximum size of cube mm! CORNER CONNECTOR M Plastic for connection with M 1504 tension fabric profile 0.06 kg CONNECTOR FOR M 1901 / U 1060 OL Aluminium with 2 E 111/m (M6) countersunk screws, for lateral connection of profiles with mm lock chamber 0.12 kg S COR PLS mm without groove

5 ACCESSORIES EXTRUSION FOR ILLUMINATION ELEMENT Z Aluminium for installation of cube illumination, installation of Z 961/13 tension lock possible Groove depth 7 mm 3.96 kg l 5000 mm Z 460 TENSION LOCK 13 MM Z 961/13.00 Zinc die-cast/steel for all profiles with mm lock chamber or in connection with Z 161/A adapter for profiles with mm lock chamber 0.05 kg 80S 120S PLS ADAPTER FÜR EINSEITIGE AUSSTEIFUNG M Steel with 2 M 1472 hammerhead screws, to install 16 mm bracing extrusion 0.10 kg mm without groove

6 ACCESSORIES CONNECTOR FOR DOUBLE-SIDED BRACING M Steel with 2 M 1472 hammerhead screws, to install 16 mm bracing extrusions 0.12 kg CORNER BRACING BOTTOM M Steel with 3 M 1472 hammerhead screws, to stabilize the bottom corner when cube is used as table, integrated foot 0.22 kg CORNER BRACING TOP M Stahl with 3 M 1472 hammerhead screws, to stabilize the top corner when cube is used as table, integrated foot 0.16 kg mm without groove

7 ACCESSORIES MOUNTING SET M Steel consists of M 1470/Ha (Hammerhead screw M8) and M 1401/21 (eye nut M8)) 0.05 kg Ø36 Ø20 40S KUB 36 M mm without groove

8 ELECTRICAL PARTS CONNECTION CABLE FOR LED PSU OL 98 / OL 100 / OL 102 / OL 108 OL Plastic, white with Schuko plug (country-specific plugs available on request) 2000 mm lang 40 40G 80S 120S 120 COR PLS MULTIPLIER 250 V / 16 A OL Plastic, white 3-pole, 1 input/2 output for connection of 2 OL 100 and/or OL 102 PSUs to the 2 m long OL 122 cable 0.01 kg 40 40G 80S 120S 120 COR PLS FEMALE PLUG 250 V / 16 A OL Plastic, white 3-pole, with strain relief, for DIY assembly of OL 122 connection cable 0.01 kg 40 40G 80S 120S 120 COR PLS mm without groove

9 ELECTRICAL PARTS MALE PLUG 250 V / 16 A OL Plastic, white 3-pole, with strain relief, for DIY assembly of OL 98 / OL 100 / OL 102 / OL 104 / OL 106 / OL 108 PSUs 0.01 kg 40 40G 80S 120S 120 COR PLS WALL POWER SUPPLY OL Plastic, black Input: V AC, 50/60 Hz Output: 24 V DC, 1,0 A, 24 W 0.14 kg 40 40G 80S 120S 120 KUB PLS Attention: OL 149 necessary! mm without groove

10 ELECTRICAL PARTS LED POWER SUPPLY UNIT 60 W / 100 W / 150 W / 240 W OL Input: V AC, 50/60 Hz Output: 24 V DC, 2,5 A, 60 W plug connection at both ends, includes 2 OL 252 mounting sets 0.67 kg 40 40G 80S 120S 120 COR PLS OL 108 M 1901 OL Input: V AC, 50/60 Hz, Output: 24 V DC, 4,16 A, 100 W plug connection at both ends, includes 2 OL 252 mounting sets 0.92 kg 40 40G 80S 120S 120 COR PLS OL Input: V AC, 50/60 Hz Output: 24 V DC, 6,25 A, 150 W plug connection at both ends, includes 2 OL 252 mounting sets 1.05 kg 40 40G 80S 120S 120 COR PLS OL Input: V AC, 50/60 Hz Output: 24 V DC, 10,0 A, 240 W plug connection at both ends, includes 2 OL 252 mounting sets 1.22 kg 40 40G 80S 120S 120 COR PLS mm without groove

11 ELECTRICAL PARTS PWM DIMMER OL Control unit & remote, voltage: 8-24 V, for normal and PWM dimming of OCTANORM LED Modules, Channels: 6, max. 3 A per channel 0.14 kg 40 40G 80S 120S 120 COR PLS CONNECTION CABLE 1000 / 3000 MM OL Plastic, white one side fitted with a plug for extension if distance between LED power supply and LED module is too big Length: 1000 mm 40 40G 80S 120S 120 COR PLS Attention! After adjusting the cable length, the plug OL 148 has to be attached on the other side! OL Plastic, white one side fitted with a plug for extension if distance between LED power supply and LED module is too big Length: 3000 mm 40 40G 80S 120S 120 COR PLS 3000 Attention! After adjusting the cable length, the plug OL 148 has to be attached on the other side! mm without groove

12 ELECTRICAL PARTS MALE PLUG 24 V / 16 A OL Plastic, blue/white 2-pole, with strain relief, for DIY assembly of 24 V OL 131 / OL 133 / OL 135 / OL 137 connection cable 0.01 kg 40 40G 80S 120S 120 COR PLS FEMALE PLUG 24 V / 16 A OL Plastic, blue/white 2-pole, with strain relief, for DIY assembly of OL 98 / OL 100 / OL 102 / OL 104 / OL 106 / OL 108 power supply units, or 24 V OL 139 / OL 140 connection cable 0.01 kg 40 40G 80S 120S 120 COR PLS MULTIPLIER 24 V / 16 A OL Plastic, blue 2-pole, 1 input/2 output, for connection of 2 OL 123 / OL 125 / OL 127 / OL 129 LED modules 0.01 kg 80S 120S 120 COR PLS mm without groove

13 ELECTRICAL PARTS ILLUMINATION ELEMENT T-SHAPE, 5 SIDES OL T-shaped illumination element, consisting of profile M 1980 with LED bands on 5 sides and cable connection. PSU and Z 460 extrusion not included. For 5-sided illumination of cubes with 1000 mm height 1.10 kg ILLUMINATION ELEMENT STRAIGHT, 4 SIDES OL Straight illumination element, consisting of profile M 1980 with LED bands on 4 sides and cable connection. PSU and Z 460 extrusion not included. For 4-sided illumination of cubes with 1000 mm height 1.00 kg Attention: can only be used in connection with OL T 50! ILLUMINATION ELEMENT SET OL Output: 120W Voltage: V AC, 50/60 Hz Light color: K for illumination of cubes with surfaces bigger than mm, incl. E40 socket and 5000 mm cable connection Attention! Only to be installed by expert staff! Ø mm without groove

14 ELECTRICAL PARTS DIFFUSOR SCREEN OL Plastic for light dispersion if more than 1 OL 670 / OL 675 is used 0.05 kg DIFFUSOR SCREEN OL Plastic for light dispersion if more than 1 OL 670 / OL 675 is used 0.05 kg LED BAND OL Voltage 24 V, light color 5600 K, output 4,8 W/m, luminous flux 390 lm/m, adhesive back Length 5000 mm mm without groove

15 ELECTRICAL PARTS LED BAND OL Voltage 24 V, light color 6500 K, output 24 W/m, luminous flux 1700 lm/m, adhesive back Length 5000 mm ILLUMINATION ELEMENT PROFILE M Aluminium for illumination element manufacturing, LED band OL 682 is stuck to the outer surfaces, Z 961/8 tension lock can be installed 2.65 kg l 5000 mm Attention: can only be used in connection with OL T 50! ILLUMINATION ELEMENT PROFILE M Aluminium for illumination element manufacturing, LED band OL 685 is stuck to the outer surfaces, Z 961/8 tension lock can be installed 5.25 kg l 5000 mm mm without groove

16 ELECTRICAL PARTS ADHESIVE BASE OL Plastic, white to attach cable to frame profile with OL 255 cable tie (not included), max. width of cable tie 4 mm Packaging unit 100 pieces Weight per unit: 0.07 kg 40 40G 80S 120S 120 COR PLS CABLE TIE OL Plastic, white 2,5 mm wide, 155 mm long Packaging unit 100 pieces Weight per unit: 0.05 kg 40 40G 80S 120S 120 COR PLS mm without groove

17 E SUSPENSION AND FABRIC DIMENSIONS TECHNICAL INFORMATION Wire suspension Fabric dimensions Fabric fitting Wire suspension (not included) Outer dimension Fabric dimension Fabric 45 Fabric dimensions Outer dimensions 45 Silicone egde The silicone edges have to be cut at a 45 angle at both ends T T O Subject to change 17

18 E PROFILE DIMENSIONS TECHNICAL INFORMATION Outer dimension A Profile dimension M 1504: A mm Outer dimension A Tension fabric profile M 1504: Profile dimension: Outer dimension frame mm Extrusion: E A-T01A Subject to change RE Profile dimension: A mm Profil dimension: Outer dimension frame mm Profile: Z 4400, Z 400, Z 460 M 1545 M

19 E ASSEMBLY INSTRUCTION TECHNICAL INFORMATION 1. assembly of cube 2. mounting of beam for lighting in center of cube M 1504 Z 460 M 1547 M 1535 E mounting of wire suspension (if required) 4a. mounting of lighting element OL 670 / OL 675 in center of beam wire rope (not included) OL 670 TI TIOL41A E A-T01 A M 1233, mounted to vertical extrusions OL 670 / OL 675 for cubes with a footprint of up to 1000x1000mm OL

20 E ASSEMBLY INSTRUCTION TECHNICAL INFORMATION 4b. alternative: mounting of lighting element OL 680 in center of beam 5. LED connection and function test OL 680 OL 670 / OL 675 for cubes with a footprint of more than 1000x1000mm Please note: cable grounding is fixed to beam using a self tapping screw. OL 680 must only be mounted by a trained electrician! 6. mounting of fabric note on fabric prefabrication 45 fabric silicone welt OL41 45 edges of silicone welts must be cut at an angle of 45 20

21 E POSITIONING OF BEAMS AND LIGHTING TECHNICAL INFORMATION Cube square 4 lighting elements Cube rectangular 4 lighting elements Cube rectangular 2 lighting elements Z1 Z1 Z Z2 x L D L D D 2000 Example: Cube 2000 x 2000 mm dimension X: ( ) / 4 = 475 mm Z1 beam: = 1880 mm Z2 beam: 2 x = 950 mm lighting element (L) at intersection of beam diffuser foil (D) between lighting elements L L D x x 2x x 2000 Z2 x L L D D L D D D 1600 Example: Cube 2000 x 1600 mm dimension X: ( ) / 4 = 475 mm L x x 2x x For determining of measure X the longer outer dimension must be used Z1 beam: mm = 1480 mm Z2 beam: 2 x = 950 mm Y L L 1000 Example: Cube 2000 x 1000 mm dimension X: 2000 / 4 = 500 mm beam: mm = 1880mm Y x 2x x 2000 lighting element (L) with measure X diffuser foil (D) between lighting elements TI TIOL31A E A-T02 B Subject to change lighting element (L) at intersection of beam diffuser foil (D) between lighting elements 21

22 E WIRING OF LIGHTNING ELEMENTS TECHNICAL INFORMATION Cube 4 Lighting Elements Cube 2 Lighting Elements Cube 1 Lighting Element Parts list for wiring of 4 lighting elements Item Qty Art. N Description 1 4 OL 670, lighting element OL 675 (straight or T-shaped) 2 2 OL 102 PSU 3 2 OL 122 connection cable 4 2 OL 150 distribution block 1 Parts list for wiring of 2 lighting elements Item Qty Art. N Description 1 2 OL 670, lighting element OL 675 (straight or T shaped) 2 1 OL 102 PSU 3 1 OL 122 connection cable 4 1 OL 150 distribution block Parts list for wiring of 1 lighting element Item Qty Art. N Description 1 1 OL 670, Lighting element OL 675 (straight or T shaped) 2 1 OL 100 PSU 3 1 OL 122 connection cable TI TIOL32A E A-T02 A Subject to change 22

23 ASSEMBLY INSTRUCTION BAR TABLE OL T50 TECHNICAL INFORMATION 1. assemble cube 2. assemble angle reinforcement M 1543 and M 1549 M 1504 A M 1549 M 1535 Detail A Detail B B 3. turn cube and assemble diagonal beam E 114 M 1549 beam 4. assemble cover plate hexagon screw DFZ M8x35 M 1543 TI TIOL40B E A T01 B Subject to change tension lock Z 951/13 D cover plate C 23 Detail C Detail D

24 ASSEMBLY INSTRUCTION BAR TABLE OL T50 TECHNICAL INFORMATION 5. assemble lighting element in the center at diagonal beam 6. vertical installation of fixing set OL 254, fix connecting cable OL 139 with cable ties OL 255 Detail E Detail F OL 255 OL 254 OL 139 E F E turn cube, connect all plugs, plug into the power supply unit, functional test LED 8. install fabric fabric refernce to fabric manucture 45 silicone welt TI TIOL40B E A-T02 B Subject to change 45 the silicone welts must be cut at corners 45 24

25 WARRANTY LED products and accessories OCTANORM offers the following warranties on all LED products installed in the OCTAlumina series, if the installation was performed by OCTANORM : LED modules: 2 years Information about the warranty for the power supply units of the HLG series can be found on the datasheet supplied by the manufacturer Mean Well (see Warranty service includes free replacement of the faulty item (excluding assembly work, reconstruction costs, and other services). Improper handling will invalidate the warranty. On the following pages please find further information and technical data about our products. Filderstadt, April 2017 OCTANORM -Vertriebs-GmbH mm without groove

26 INSTALLATION LED modules and PSU 1. Properly clean the mounting surface before installing the product. 2. Make sure the polarity of all connections (LEDs and PSU!) are right, otherwise the LEDs won t illuminate or might get damaged. 3. The connection named DIM has to be properly connected to avoid damaging the product! (If the product won t be connected to a dimmer, cut off the DIM wire and isolate the remaining bit). 4. The wires are connected properly to the PSU if they can t be pulled out manually. 5. The maximum power of the connected modules mustn t exceed 100 W! 6. The supply line between the power supply and LED bar mustn t be longer than 0.5 m if the maximum number of modules is connected! If this is the case, the supply line has to have a cross-section of 1 mm Only use PSUs with a safety certificate and 24 V DC output voltage (± 5% tolerance. Needs short-circuit protection, overvoltage protection, and excess current protection). 8. The PSU should always supply 20% more power than the rated output off all installed modules. WARNING: The indoor version mustn t be used in a humid environment! It is forbidden to take apart or modify the module! Never install the module while it is connected to a live wire! Mounting and maintenance is only to be carried out by qualified personnel! Please check if the voltage is right (24 V) and if all cables are connected correctly before turning on the modules! mm without groove

27 LED-MODULES General information OCTAlumina LEDs were specifically designed to illuminate double or single-sided light boxes. The High-Power-LEDs are mounted in the lateral system grove of the OCTAlumina frame. From there, the supplied optics ensure a homogenous illumination of the area. ADVANTAGES: Special optics equipped with lenses for high light and power efficiency (85 lm/watt) 50% less energy usage compared to fluorescent tubes Infinitely variable Easy mounting due to predrilled holes Power supply with constant current technology, ensuring a longer lifespan and even illumination without brightness fluctuations Can be connected to any common LED power supply unit with constant current technology TECHNICAL DATA: Protection class: IP 33 Colour Rendering Index (CRI): > 80 Voltage: 24 V Operating temperature: -25 C bis +60 C LED PRODUCTS: LIGHT COLOUR 6500 K, 24 V Rigid Sidebar OL OL 112 Rigid Sidebar OL OL 129 Rigid Sidebar OL OL 312 Lighting element cone shaped OL 680 Stripe OL 682 Stripe OL 685 LED PRODUCTS: RGB, 12 V 3-point LED Module OM 103 Stripe OM mm without groove

28 SAFETY INSTRUCTIONS OCTAlumina OCTAlumina products are designed as lightboxes for silicon edge graphics. Their intended use is the illumination of graphics printed on fabric. In case of damage to persons or property due to mishandling and/or wrong installation of the product, any use other than the aforementioned, or nonobservance of these safety instructions, OCTANORM does not assume liability. Noncompliance also results into expiration of all warranty claims. We do not assume liability for any subsequent damage. The product must not be used without silicon edge graphics mounted (blinding danger). The product must be closed on all sides before use. The LED modules have to be fully covered. Do not dispose of the product in normal waste. Please refer to local laws and regulations when disposing of this product mm without groove

29 SAFETY INSTRUCTIONS OCTAlumina Only use the product in dry, dust-free environments. The product is approved for temperatures between -25 C and +45 C. The product must not be used in indoor swimming pools (chloric atmosphere) or places with high corrosion potential (seawater or other atmospheres with high salt content). When disassembled, the profiles have sharp corners (risk of injury!). Please wear adequate protective clothing. Do not put any additional weight on the product and do not lean on the product. If in doubt about the safety, connection, and/or proper use of the product please contact a specialist or your seller. All electrical components have to be checked for possible damage before use. Do not use the product if there is any visible damage or you observe malfunctions. Do not change or alter the product. If a component (e.g. LED module, PSU) is faulty, please use only official OCTANORM spare parts. Installation on primary and/or secondary power lines only after turning off the power. All usual health and safety regulations apply. Secondary 24 V AC power lines must not touch any primary power lines. The product should only be cleaned with a clean, dry cloth. Storage (e.g. when not used) only in closed, dry areas mm without groove

30 OCTANORM Germany Head Office Raiffeisenstraße Filderstadt T F info@octanorm.de EUROPE OCTANORM Belgium T OCTANORM France T OCTANORM UK T OCTANORM Hellas T OCTANORM Italia T OCTANORM Nederland T OCTANORM Polska T OCTANORM Adria T OCTANORM Espana T OCTANORM Nordic T OCTANORM Russia T AMERICA OCTANORM Canada T OCTANORM USA T OCTANORM México T OCTANORM Brasil T OCTANORM Argentina T AFRICA OCTANORM South Africa T MIDDLE EAST OCTANORM Emirates T AUSTRALIA OCTANORM Australia T ASIA OCTANORM Japan T OCTANORM China T AW 7958_E.GB_OCTALUMINA TECHNICAL INFO_09/2017