Alumecano Plywood. Product brochure

Transcription

1 Alumecano Plywood Product brochure Encofrados J. Alsina S.A. Pol. Ind. Pla d en Coll Camí de la Font Freda, Montcada i Reixac (Barcelona - Spain) Tel.: (+34) Fax: (+34) alsina@alsina.es Web:

2 Alumecano Plywood Alexander building, Uruguay Alumecano Plywood is a totally mechanized decking system that uses only 3 basic elements: Support Girder, Main Girder and Drophead. The design of its elements optimises to the maximum its dimensions and materials for a more rational and effective use. Design that also facilitates the assembly as well, contributing efficiency in the stages of work. Alumecano Plywood stands out as well by its lightness and resistance that allows a longer use and better handling for the workers. High productivity Safety Cost-effectiveness Easy to assembly: only 3 main elements allowing faster and intuitive assembly. Mechanized system: semi-rigid unions and guided position of the girders. Light system: Main girder with dropheads (25Kg), approximately 50% less than other similar systems of the market. Stable grid structure: structural elements incorporating U guiding the structure. Resistant components: Main girder and Support girder made of high resistance steel. Safe design: Drophead with double support, it provides a stable and safe support for the formwork surface. Early stripping: 3 days after pouring*, 80% of the material can be recovered. No need to set-out props: thanks to the drophead and the design of main girders it is not necessary to set-out props. Cost-effectiveness: early stripping allows shorter elapsed time pouring cycles.

3 Alsina Systems - Mecanoconcept Components Main Girder 2. Support Girder 3. Drophead 4. Plywood 3 Complete formwork set Alumecano Plywood complete formwork equipment means: Support Girder (white) every 6-6 3/4 (2.0 m)*, Main girder with Dropheads every 2.5 m and 4 removable girders in between distant every /16 (0.5 m). Early stripping Alumecano Plywood stripping process starts recovering simultaneously Support Girders (white) and main girders (red). Only 20% material remains Immediately afterwards Dropheads from the remaining supporting girders allows recovering of Plywood panels. Only main girders placed every 8-2 7/16 (2.5 m) (Plywood dimensions) will remain supporting the concrete slab up to 21 or 28 days.

4 Easy and safe joining system Semi-rigid joining system for faster assembly and stability. Pre-set positions for main girders Main and Secondary girders are hooked by means of the provided U lay-out. Aluminium Drophead Made of duraluminium (light and resistant) incorporates safety features: wood filler for plywood nailing and rubber plugs to ease the effects when stripping. Drophead with doble support Alumecano s Drophead doesn t rely on dangerous welding traction moments. Always attached at both ends: one with a Telescopic Prop and at the other slotted into the Main girder specially designed gap. Double support Slot for the next Drophead Main Girders were designed with special support to slot in the Drophead at one end.

5 Alsina Systems - Mecanoconcept Intuitive assembly The design of the support girders includes the pre-set position for Main girders (as shown in the picture below) enhancing productivity in the assembly and stability to the structure at the same time. Lower U for main girders Higher U for girder with drophead Support girder: 2,54 (8 ft plywood) or 2,60 m (250 cm plywood) Self-guided assembly Joins between support girders are easy to rich and, once they are joined. safely attached. The She end of the girder holds the He end of the next girder working steady and facilitating a stable grid from the start. Alsitec Our Technical Sales Consultants are strongly supported by Alsitec. Alsitec is a complete team of experienced engineers equipped with advanced tools and software that allows Alsina to face any challenge, providing drawings, special calculations, specific solutions, and engineering support on-site.

6 More than 65 Years of Experience Using more than 75 own Software Solutions Comprehensive Sales & Technical Service On Site Consultancy and Support Dedicated Supply Chain with our 35 Worldwide Subsidiaries Operating under the ISO 9001:2008 Standard Active on Staff and Customers Training Safety Systems and Accessories Alsina Group Tel. (+34) Web: Mail: