Atlas Copco Blasthole Drills DM-M3
|
|
- Samson Cannon
- 6 years ago
- Views:
Transcription
1 Atlas Copco Blasthole Drills DM-M3
2 It all starts with the blasthole... and the blasthole starts with the DM-M3 power and performance. A unique patented feed system: Longer head travel with smaller cylinder rod. Heavy-duty cables that provide 1:4 weight reduction over chain. Interchangable cable pieces. Less tower weight with better distribution for tramming. Cable that detects wear earlier and is less expensive than chain. An unparalleled rotation system: Largest continuous torque/rpm envelope available. Instant compensation to changes in ground conditions without special gear set removal or addition. 2-stage reduction with large spur gears maintains inertia and is more durable than external planetary gears. High pressure, low flow, pressure compensated closed loop hydraulic system is more efficient and longer lived. Power head weight exceeds 5,000 lbs (2,313 kg) to add to bit loading. A strong and rigid drill tower: Four main member, open front ASTM A500 Grade B rectangular steel tubing; cold sawed and welded. Double cut lacing used to contain bending moments within the tower structure. Two (2) hydraulic 8" bore (20.3cm) tower raising cylinders. Tower can be raised and lowered in seconds with a full complement of drill pipe in the carousel and under the rotary head. Remote pinning from the cab. Patented angle drill system available as an option - keeps pivot point at drill deck and drill pipe always within the dust curtain even at 30 maximum.
3 Versatility and adaptability: The DM-M3 is available with many options and choices of features to permit it to adapt to any mining situation anywhere in the world. New processes are in place to expand the capabilities of the DM-M3 even more. Product support and parts: Atlas Copco worldwide network will support the DM-M3 wherever there is drilling to be done. Genuine Atlas Copco parts will keep your DM-M3 running at peak efficiency. A reliable and efficient power pack group: Air compressor, prime mover and hydraulic pumps in-line, driven by double-ended shaft with flexible coupling to better maintain alignment. Floating subframe minimizes transmission of shock loads to power pack. Separate, 3-stage inlet dry-type air filters for compressor and engine. Standard split cooling to 125 F (52 C) with separate cooler for hydraulic oil and compressor oil. Ambient air used through the coolers rather than heated air over the engine. Closed loop hydraulic system for greater efficiency. Three (3) hydraulic pumps as opposed to 5-7, to reduce parasitic load. Diverter value used rather than clumsy mechanical disconnects, prevents accidential tramming while in drill mode. Excellent access to the hydraulic pumps for reduced service time. Two (2) sets of 3 micron filters minimize hydraulic contamination. Compressed air is not used to supercharge pumps in order to reduce fire hazard. Ingersoll-Rand asymmetrical, oil-flooded rotary screw air compressor for single-source warranty and service responsibilty. Compressor is rated at 110 psig (758 kpa) for better bit cleaning, cooling and lubrication. A gear pump provides positive lubrication to the compressor bearings at all times. A "zero-load" system to unload compressor when not needed to extend compressor life, reduce fuel use and promote easier cold weather starting. Coolers are located on the sides of the drill deck, not under the tower rest where drill dust can be ingested when the tower is lowered.
4 A sturdy and stable drill platform: Mainframe designed and weld fabricated of ASTM A I-beam; 24 x 146. Radius gussets used for reinforcement at major stress points for reduced deflection and better stress distribution. Three hydraulic leveling jacks for maximum "tripod stability". An "Excavator-type" undercarriage is used for better traction and slewing ability. Triple-bar grouser pads are replaceable for reduced maintenance and down time. Oscillation yoke mounting with 5 each direction or total 10 up and down to minimize stress on frame and components. Two (2) hydraulic motor drive powered by hydro static closed loop system, through planetary gear speed reducers for maximum efficiency. Spring applied, hydraulic release brake system for safety. Drive system can be disengaged for towing. A comfortable and efficient operator environment: Sealed, pressurized and heated cab with large tinted windows; sound abatement; ample work area and headroom. Air conditioner available as an option. Controls are electric over hydraulic for ease of operation, and concise and rapid response. Excellent visibility of the drill deck for safe and efficient operation. Standard 6 light package for safe nigh time operation with option for 12. Machine access lighting of ladder and cab when engine not operating, for added safety. Quality assurance: ISO 9001/Q9001 registry. In-place Quality Assurance Programs and Objectives at the manufacturing plant headed by full-time staff. Employee involvement quality program at all levels. Preferred supplier program to assure the high level of proficiency and performance levels that Atlas Copco demands.
5 Specifications NORMAL HOLE DIAMETER WEIGHT ON BIT FEED SPEED RETRACT SPEED CAROUSEL CAPACITY ROTARY HEAD TORQUE (STANDARD) AIR COMPRESSOR DIESEL FUEL CAPACITY DIESEL ENGINE 2 COOLING SYSTEM UNDERCARRIAGE ESTIMATED OPERATING WEIGHT OVERALL WIDTH OVERALL LENGTH (TOWER DOWN) OVERALL LENGTH (TOWER UP) AVAILABLE OPTIONS INCLUDE 9-7/8 in. to 12-1/4 in. / 251 to 311 mm 0 to 90,000 lbf. / 0 to 400 kn Up to 144 feet/minute / 43.9 m/minute Up to 138 feet/minute / 42.1 m/minute 4 pieces 10-3/4 in. x 40 ft. / 273 mm x 12.2 m 5 pieces 8-5/8 in. x 40 ft. / 219 mm x 12.2 m 10,607 ft-lbs / 14,383 Nm Ingersoll-Rand asymmetrical rotary screw psig / 74.6 m 3 bar 650 US gallons / 2,460 liters Caterpillar C HP/709 kw or Cummins QST HP/745 kw 125 F/ 52 C separate cooler for hydraulic oil and compressor oil Intertrac B8 or Caterpillar 350 Custom 230,000 lb. / 104,327 kg 18 ft. 10-3/8 in. / 5.75 m 66 ft. 6 in. / m 45 ft. 5 in. / m 0 to 30 angle drill package (patented); water injection; dry dust control; cab air conditioner; fire suppression; central lubrication; central service of fluids; automatic leveling; accessories, etc. 1 2 Performance figures are based on maximum computed values at 100% efficiency. Electric drive available, but may extend delivery.
6 Committed to your superior productivity Worldwide Dealer Network With the largest distribution network in the industry, Atlas Copco has a sales center near you providing products, accessories, and financing options to fit all your drilling needs. Worldwide Product Support Our team of experienced drill specialists are strategically located near you to offer troubleshooting expertise and to help solve difficult problems. Worldwide Availability Our worldwide distribution network is committed to providing the parts and service you need to keep your drills running efficiently and cost effectively. Nothing contained in this brochure is intended to extend any warranty or representation, expressed or implied, regarding the products described herein. Any such warranties or other terms and conditions of sale shall be in accordance with Atlas Copco s standard terms and conditions of sale for such products which are available upon request. Commitment to inno- Part No M0706EP Printed in USA Atlas Copco Drilling Solutions Inc A company within the Atlas Copco Group
RD20II RD20III Worldwide Dealer Network Worldwide Product Support Worldwide Availability Atlas Copco Drilling Solutions Inc.
Atlas Copco RD20 The RD20 Advantage equals power, performance, and mobility Powerful Feed System The patented carriage feed system is the heart of the RD20. It delivers a full 110,000 lb. (49,896 kg) of
More informationMD6420. Rotary Blasthole Drill. 10 Meter Mast Configuration. Rotary Drive System. Operating Temperature. Cooler Assembly. Pull-down/Hoisting Capacity
MD6420 Rotary Blasthole Drill 10 Meter Mast Configuration Hole diameter 229-311 mm 9-12.25 in Depth single pass Up to 10.29 m Up to 33 ft 9 in Depth multi-pass Up to 63.40 m Up to 208 ft Operating Temperature
More informationMD6420. Rotary Blasthole Drill. 10 Meter Mast Configuration Rotary Drive System. Compressor (Standard) Operating Temperature
MD6420 Rotary Blasthole Drill 10 Meter Mast Configuration Rotary Drive System Hole diameter Up to 311 mm Up to 12.25 in Torque 0-15 185 N m 0-11, 200 lbf-ft Depth single pass Up to 10.29 m Up to 33 ft
More informationECM-720 CM-760D CM-780D
Setting The Pace Hydraulic Crawler Drills ECM-720 CM-760D CM-780D HOLE QUALITY PENETRATION RATE ACCESSORY LIFE Tough Enough To Lead, Highest Quality Atlas Copco crawler drills are designed and manufactured
More informationPowerROC T25 E Surface drill rig for drill site construction and civil engineering, and small aggregate and limestone quarrying.
PowerROC T25 E Surface drill rig for drill site construction and civil engineering, and small aggregate and limestone quarrying. Hole diameter: 51 89 mm( (2" 3½") 1 Powerful and effective If you re looking
More informationPowerROC D55. Surface drill rig for mining, aggregate quarries, and construction. Hole range: mm ( 3 9/16 6 1/2 )
PowerROC D55 Surface drill rig for mining, aggregate quarries, and construction. Hole range: 90 165mm ( 3 9/16 6 1/2 ) Power up your performance The PowerROC D55 is designed according to our philosophy
More informationDRILLS. Caterpillar Performance Handbook Edition 44
DRILLS Caterpillar Performance Handbook Edition 44 800.47.4228 www.hawthornecat.com 2014 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, Caterpillar Yellow, the
More informationPneumatic crawler drill
27 / 28 Pneumatic crawler drill CRAWLER ASSEMBLY The crawler uses parts designed and time tested by Furukawa. These include the track-link crawler chains and track rollers. The ruggedly constructed crawler
More informationPowerROC D55 Surface drill rig for mining, aggregate quarries, and construction
PowerROC D55 Surface drill rig for mining, aggregate quarries, and construction Hole diameter: 90 165 mm (39/₁₆" 6½") 1 Power up your performance The PowerROC D55 is designed according to our philosophy
More informationT50. Surface drill rig for limestone and cement quarrying, open pit mining, and aggregate quarrying. Hole diameter: mm / 4 6
powerroc T50 Surface drill rig for limestone and cement quarrying, open pit mining, and aggregate quarrying. Hole diameter: 102 152mm / 4 6 trustful performer with striking efficiency Everything about
More informationDR460 blasthole drill
DR460 blasthole drill Class leader performance engineered In its class of blasthole drills, the DR460 is the benchmark for user approval, reliability, and drilling productivity. Its applications include
More informationpowerroc T30 & T35 Surface drill rig for construction operations, aggregate and limestone quarrying.
powerroc T30 & T35 Surface drill rig for construction operations, aggregate and limestone quarrying. Hole diameter : 64 89mm (2 1/2 3 1/2 ) : 64 115mm (2 1/2 4 1/2 ) Power and performance Atlas Copco s
More informationD90KS and 1190E blasthole drills
D90KS and 1190E blasthole drills Sandvik is a high-technology engineering group with world-leading positions in selected areas tools for metal working, advanced materials technology, and mining and construction.
More information5200 ITH Specifications and Features
2003 Specifications and Features 5200 ITH The 5200 is a track mounted ITH drill designed to drill with In-The-Hole hammers powered with high air pressure. This drill is unitized with an on board reciprocating
More informationAtlas Copco Blasthole T4BH series
Atlas Copco Blasthole T4BH series Drills DTH and Rotary drilling Multi pass Holediameter 5 %in 97/8 in (143 251 mm) Maximum hole depth for 25 ft tower: 147 ft (45 m) Maximum hole depth for 30 ft tower:
More informationMD6240. Rotary Drill. Basic Specifications kg (52,911 lb) 597 kw (800 hp) at 2,100 rpm. 48 m³/min (1,700 ft³/min) 6.
MD6240 Rotary Drill Basic Specifications Hole Diameter Bit Load Hole Depth Single-pass (12 m/39 ft mast) Hole Depth Single-pass (15 m/49 ft mast) Engine Cat C27 Tier 2 Compressor 152-244 mm (6-9.625 in)
More informationAtlas Copco. T4W Water Well Drill Specifications. U.S. Units
Atlas Copco T4W Water Well Drill Specifications U.S. Units Table of Contents General...3 Power Pack...3 Engine...3 Compressor...3 Hydraulic System...4 Cooling Package...4 Derrick...4 Feed System...5 Rotary
More informationFLEXIROC T45. Surface drill rig for quarry and construction. Folding boom Hole diameter: mm (3½" 5")
FLEXIROC T45 Surface drill rig for quarry and construction. Folding boom Hole diameter: 89 127 mm (3½" 5") Fixed boom Hole diameter: 89 140 mm 3 ½" 5 ½" PRECISE POWER HALF THE FUEL CONSUMPTION YEARS OF
More informationFLEXIROC T45. Surface drill rig for quarrying and construction. Folding boom Hole diameter: mm (3½" 5")
FLEXIROC T45 Surface drill rig for quarrying and construction. Folding boom Hole diameter: 89 127 mm (3½" 5") Fixed boom Hole diameter: 89 140 mm 3 ½" 5 ½" PRECISE POWER HALF THE FUEL CONSUMPTION FIELD
More informationAtlas Copco Surface drill rig. ROC F7 Recommended hole range mm (3" 4 1 /2")
Atlas Copco Surface drill rig ROC F7 Recommended hole range 76 5 mm (3" /") Power and economy in perfect harmony Atlas Copco s ROC F7 surface crawler is an excellent example of company philosophy. A philosophy
More informationReliability at work. Proven Durability. Hydraulic Mining Excavators
Reliability at work Proven Durability Hydraulic Mining Excavators Proven Durability Proven success in nearly every surface mining application across the globe substantiates the durability of Bucyrus hydraulic
More informationFlexiROC T35 & T40 Surface drill rigs for quarrying and construction
FlexiROC T35 & T40 Surface drill rigs for quarrying and construction FlexiROC T35 hole diameter: 64 115 mm (2.5 4.5 ) FlexiROC T40 hole diameter: 64 127 mm (2.5 5 ) Flexible rigs for all occasions For
More informationFlexiROC T35 & T40. Surface drill rigs for quarrying and construction. FlexiROC T35 Hole diameter: mm (2 1/2 4 1/2 )
FlexiROC T35 & T40 Surface drill rigs for quarrying and construction FlexiROC T35 Hole diameter: 64 115 mm (2 1/2 4 1/2 ) FlexiROC T40 Hole diameter: 64 127 mm (2 ½ 5 ) Flexible rigs for all occasions
More informationECM-720 CM-760D CM-780D
Setting The Pace Hydraulic Crawler Drills ECM-720 CM-760D CM-780D HOLE QUALITY PENETRATION RATE ACCESSORY LIFE COLLAR SOFT ROCK Strata-Sense Drill Automatics Optimization of drilling speed, hole straightness
More informationDYNATECH INDUSTRIES PVT LTD
DYNATECH INDUSTRIES PVT LTD CD SERIES Heavy Duty Diamond core Drill MODEL CD75 TECHNICAL SPECIFICATIONS Product Introduction DynatechIndustriesCoreDrill- CD75 is a versatile heavy duty Hydraulic Diamond
More information301.7D CR. Mini Hydraulic Excavator
301.7D CR Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Transport Weight with Canopy 1610 kg 3,550 lb Rated Net Power @ 2,200 rpm (ISO 9249) 13.2 kw 17.7 hp Operating
More informationPowerROC T35. Surface drill rig for construction and quarrying Hole diameter: mm (2½" 4½")
PowerROC T35 Surface drill rig for construction and quarrying Hole diameter: 64 115 mm (2½" 4½") 1 Power and performance Epiroc s PowerROC rigs truly live up to their names with enough muscles for tough
More informationAtlas Copco. Oil & Gas. Proposal/ Specifications Package. RD20III - Form C USA 08/07 Replaces B
Atlas Copco RD20III Oil & Gas Proposal/ Specifications Package RD20III - Form 87224-C USA 08/07 Replaces 87224-B Oil & Gas RD20III Proposal/ Specifications Package Table of Contents STANDARD EQUIPMENT...3
More informationBlaw-Knox PF-6110 Track Pavers
Blaw-Knox PF-6110 Track Pavers Moving the World Forward We re as dedicated to paving as you are The new highway-class pavers from Ingersoll Rand have been designed with global technology and customer input
More information350 MH. Material Handler
0 MH Material Handler The Cat 0 Material Handler is specifically designed for the scrap and material handling customer. This machine uses the most sophisticated manufacturing technology to ensure the highest
More informationSLSERIES - LP12. Scissorlift Vehicle AT A GLANCE OPTIONS FEATURES & BENEFITS. High speed / high mobility underground scissorlift vehicle.
SLSERIES - LP12 Scissorlift Vehicle AT A GLANCE Weights & Dimensions: Operating Weight Overall Tramming Length Overall Width 31,000 lbs (14,091 kg) 27-2 (8.29 m) 7-0 (2.13 m) Tramming Height Carrier Articulation
More informationPowerROC T25 DC Surface drill rig for drill site construction civil engineering, small aggregate and limestone quarrying.
PowerROC T25 DC Surface drill rig for drill site construction, civil engineering, small aggregate and limestone quarrying. Hole diameter: 51 89 mm (2" 3½") 1 Your way to success The PowerROC T25 DC uses
More information303E CR. Mini Hydraulic Excavator
303E CR Mini Hydraulic Excavator Engine Weight Gross Power 18.5 kw 24.8 hp Operating Weight with Canopy 3048 kg 6,721 lb Net Power 17.5 kw 23.5 hp Operating Weight with Cab 3267 kg 7,204 lb The Cat 303E
More informationSmartROC D50 and D55 DTH surface drill rig for quarrying and mining
SmartROC D50 and D55 DTH surface drill rig for quarrying and mining SmartROC D50 hole diameter: 90 130 mm (3.5 5.1") SmartROC D55 hole diameter: 90 152 mm (3.5 6") Drill rigs with intelligence and power
More information305 CR. Mini Hydraulic Excavator
305 CR Mini Hydraulic Excavator Engine Power Gross 32 kw 43 hp Net 31.3 kw 42 hp Maximum Operating Weight With cab 4990 kg 11,000 lb With canopy 4940 kg 10,890 lb 305 CR Mini Hydraulic Excavator Designed
More informationAtlas Copco Pneumatic Surface Drill Rig ROC 442PC. Tophammer Crawler Rig. Hole range mm (1 5 / / 2 )
Atlas Copco Pneumatic Surface Drill Rig ROC 442PC 3 8 Tophammer Crawler Rig Hole range 41 115 mm (1 5 / 8 4 1 / 2 ) ROC 442PC the Workmate A tophammer crawler rig for 41 115 mm (1 5 /8 4 1 /2 ) holes.
More informationLIUGONG & DEALERS GLOBAL>>>
LIUGONG & DEALERS GLOBAL>>> STRONG PRESENCE, SUBLIME SUPPORT LiuGong has established a solid infrastructure with over 12,000 employees worldwide, 320 dealers, 7 regional parts depots and 9 strategically
More informationSMARTROC D60. Surface drill rig for aggregate and limestone quarries, surface mining and construction. Hole diameter mm (4 5/16 7 )
SMARTROC D60 Surface drill rig for aggregate and limestone quarries, surface mining and construction Hole diameter 110 178 mm (4 5/16 7 ) SMART IS THE NEW ROBUST A SMART DRILLING SOLUTION, BUILT ON A ROBUST
More informationXHP / HP P1600 Compressors
XHP600-1250 / HP1000 - P1600 Compressors 2 Compressor Features Ingersoll-Rand oil-flooded screw airend Compressor oil filtration Dual 25 micron filters are provided for optimum oil filtration Oil separation
More informationBlastHole PRODUCTIVE RELIABLE ECONOMICAL.
BlastHole DrillS PRODUCTIVE RELIABLE ECONOMICAL high-performance drilling options. MORE PRODUCTIve, LESS MAINTENANCE. www.frdusa.com 1 / 2 Inside Furukawa Rock Drill usa TRADITION AND HIGH-TECH FROM ONE
More informationFLEXIROC T35,T40 SPEEDROC D30. Surface Drill Rig for medium sized drifts and tunnels with a coverage area up to XXX m2
FLEXIROC T35,T40 Surface Drill Rig for medium sized drifts and tunnels with a coverage area up to XXX m2 SPEEDROC D30 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone
More information306E. Mini Hydraulic Excavator. Engine Model Cat C2.6 (DI Turbo) Operating Weight 5795 kg
306E Mini Hydraulic Excavator Engine Weights Engine Model Cat C2.6 (DI Turbo) Operating Weight 5795 kg Net Power 41.5 kw (55.6 hp) Gross Power @ 2,000 rpm 43 kw (57.6 hp) 306E Features Increased Performance
More informationMD6250. Rotary Blasthole Drill Specifications 11.2 or 13.6 m (36.7 or 44.6 ft) Mast Configurations. Basic Specs
MD6250 Rotary Blasthole Drill Specifications 11.2 or 13.6 m (36.7 or 44.6 ft) Mast Configurations Description The MD6250 crawler-mounted blasthole drill is designed to drill from 152-250 mm (6-9.8 in)
More informationFlexiROC T15 R Surface drill rig for quarrying and construction
FlexiROC R Surface drill rig for quarrying and construction Hole diameter: 27 51 mm (1" 2") Productivity in a small package When small holes mean big business, the FlexiROC R drill rig is your best friend.
More information301.5, 301.6, Mini Hydraulic Excavator
301.5, 301.6, 301.8 Mini Hydraulic Excavator 301.5 301.6 301.8 Cat 3003 Naturally Aspirated Diesel Engine Flywheel Power 13 kw 17.4 hp 13 kw 17.4 hp 13 kw 17.4 hp Operating Weight With canopy 1616 kg 3563
More informationOil-free Portable Compressors
Oil-free Portable Compressors High performance, easy operation, and outstanding control For more than 125 years, Ingersoll Rand has been the world leader in compressor technology. That tradition of leadership
More information44.3 kw (59.4 HP) at 2100 rpm kg mm DX85R-3. Compact Excavator
44.3 kw (59.4 HP) at 2100 rpm 8540-8600 kg 4175-4725 mm DX85R-3 Compact Excavator All-round versatility and improved fuel efficiency Whatever your application you can rely on the DX85R-3 ideal working
More informationSandvik DI600 Always a hole ahead
Sandvik DI600 Always a hole ahead Enjoy the power and precision EXPERIENCE FOR YOUR BENEFIT As the offspring of the well-known BPI Titon 600, the Sandvik DI600 DTH rigs are a result of 40 years experience
More information303E CR. Mini Hydraulic Excavator. Engine Gross Power 18.5 kw 24.8 hp Net Power 17.5 kw 23.5 hp
303E CR Mini Hydraulic Excavator Engine Gross Power 18.5 kw 24.8 hp Net Power 17.5 kw 23.5 hp Weight Operating Weight with Canopy 3310 kg 7,297 lb Operating Weight with Cab 3530 kg 7,782 lb The Cat 303E
More informationROBBINS 34RH C. Low-profile raise boring machine for holes ranging from 0.6 to 1.5 m (2-5 ft.) in diameter.
ROBBINS 34RH C Low-profile raise boring machine for holes ranging from 0.6 to 1.5 m (2-5 ft.) in diameter. RAISING THE BAR IN VERSATILITY THE ROBBINS 34RH C IS A LOW-PROFILE, LIGHTWEIGHT RAISE DRILL RIG
More informationMINI-EXCAVATOR. ViO57U. 5325/5395 kg
MINI-EXCAVATOR 5325/5395 kg COMPACTNESS The is a true Zero Tail Swing machine: neither the counterweight nor the front part of the upper frame exceed the width of the crawlers. Rear swing radius: 975 mm
More informationMD5075. Track Drill. General Data. Hole Depth Maximum 31 m ft. Compressor 9.9 m 3 /min 350 ft 3 /min Rock Drill HPR kw 25 hp
MD5075 Track Drill General Data Hole Diameter Range 76.2 mm-127 mm 3.0 in-5.0 in Hole Depth Maximum 31 m 102.5 ft Engine C9 Tier 3 224 kw (300 hp) at 1,800 rpm Compressor 9.9 m 3 /min 350 ft 3 /min Rock
More informationTotal Power 884 kw 1,185 hp 0 to Maximum Cut mm in Cutter Head Power 500 kw 670 hp
CM445 Continuous Miner Power Cutting Total Power 884 kw 1,185 hp 0 to Maximum Cut 1492-3989 mm 58.75-157 in Cutter Head Power 500 kw 670 hp Loading Unit Machine Weight Loading Capacity 14-35 tonnes/min
More informationEC240B, EC290B, EC360B, EC460B
VOLVO CRAWLER EXCAVATORS EC240B, EC290B, EC360B, EC460B Quickspecs EC240B EC290B EC360B EC460B Operating Wt. 24.8-27.6 t 24.8-27.6 t 36.3-38.4 t 47.9 t Std. Bucket 0.5-2.0 m3 0.5-2.0 m3 1.4-3.0 m3 1.8-3.8
More informationSimba K102 production drill rig. Hydraulic production drill rig for long-hole mining
Simba K102 production drill rig Hydraulic production drill rig for long-hole mining 1 Get into your tunnel The simple and practical Simba k102 is a long-hole production drill rig for small to medium-drift
More informationAccessories: Dust collector. Slope winch. Bit grinder Application: Water wells
Deltabase 430 - DTH drill rig Deltabase 430 - DTH drill rig Deltabase 430 is a compact, lightweight drill rig especially designed for DTH work on modern job sites. The DB 430 is optimised to drill 4 to
More informationRD20/RD20XC/APL DRILL RIGS. Oil and Gas Drilling atlascopco.com/rd20
RD20/RD20XC/APL DRILL RIGS Oil and Gas Drilling atlascopco.com/rd20 THE INDUSTRY STANDARD Approximately 300 RD20 s operating worldwide have earned a reputation for reliability, strength and drilling performance.
More informationCB334E CB335E. Asphalt Compactor. Combi-Asphalt Compactor
Asphalt Compactor Combi-Asphalt Compactor Cat 3024C Diesel Engine Gross Power 34.1 kw (46 hp) 34.1 kw (46 hp) Operating Weight (with ROPS) 3940 kg (8,688 lb) 3670 kg (8,092 lb) Compaction Width 1.3 m (51")
More informationFlexiROC D60/D65 Surface drill rig for quarrying and construction
FlexiROC D60/D65 Surface drill rig for quarrying and construction FlexiROC D60 hole diameter: 110 178 mm (4.3" 7") FlexiROC D65 hole diameter: 110 203 mm (4.3" 8") A rig you can rely on The FlexiROC D60
More information345B MH. Series II Material Handler
34B MH Series II Material Handler The Cat 34B Series II Material Handler is specifically designed for the scrap and material handling customer. This machine uses the most sophisticated manufacturing technology
More information307E2. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Bucket Width 854 mm Net Power 41.5 kw (55.
307E2 Mini Hydraulic Excavator Bucket Engine Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Bucket Width 854 mm Net Power 41.5 kw (55.6 hp) Gross Power @ 2,000 rpm 43 kw (57.6 hp) Weights
More informationEXTRA LARGE VALUE IN CARGO HANDLING DIESEL-ELECTRIC MODEL 5 MOBILE HARBOR CRANES
EXTRA LARGE VALUE IN CARGO HANDLING DIESEL-ELECTRIC MODEL 5 MOBILE HARBOR CRANES 2 3 MODEL 5 MOBILE HARBOR CRANES FUNCTIONAL DESIGN AND POWERFUL PERFORMANCE Gottwald Model 5 Mobile Harbor Canes are very
More informationSY215C HYDRAULIC EXCAVATOR
SY215C HYDRAULIC EXCAVATOR hydraulic excavator SY215C overview Engine Isuzu AM-4HK1X Power 128 kw /2000 rpm Operating weight 22200 kg Ground Pressure 47 kpa Bucket capacity 0.93 m³ Reliable First-class
More informationPowerROC T45. Surface drill rig for quarrying and construction Hole diameter: mm( (3" 5")
Surface drill rig for quarrying and construction Hole diameter: 76 127 ( (3" 5") 1 Power built in The gives you high reliability and power worthy its name. Thanks to its compact structure and high manoeuvrability,
More information303 CR. Mini Hydraulic Excavator
303 CR Mini Hydraulic Excavator Engine Power Gross 20.2 kw 27.1 hp Net 19.5 kw 26.1 hp Maximum Operating Weight With cab 3420 kg 7524 lb With canopy 3330 kg 7326 lb 303 CR Mini Hydraulic Excavator Designed
More informationMD5050/MD5050 T General Data
MD5050/MD5050 T Track Drills General Data Hole Diameter Range 63.5 mm-102 mm 2.5 in-4.0 in Hole Depth Maximum 31 m 102.5 ft Engine Tier 3, 4 cylinder, turbocharged 150 kw (203 hp) @ 2,100 rpm Compressor
More informationMINI-EXCAVATOR. ViO57U. 5325/5395 kg. Call for Yanmar solutions
MINI-EXCAVATOR 5325/5395 kg Call for Yanmar solutions COMPACTNESS The is a true Zero Tail Swing machine: neither the counterweight nor the front part of the upper frame exceed the width of the crawlers.
More informationCM235. Continuous Miner
CM235 Continuous Miner Power Cutting Total Power 701 kw 940 hp 0 to Maximum Cut 914-3251 mm 36-128 in Cutter Head Power 410 kw 550 hp [2.8 m3/sec (6,500 ft3/min) scrubber] Loading Unit Machine Weight Loading
More informationAtlas Copco Oil-injected Rotary Screw Compressors. G kw / hp
Atlas Copco Oil-injected Rotary Screw Compressors G 110-160 110-160 kw / 150-200 hp A cost effective compressed air solution Reliable and built to last, the G 110-160 compressors are designed to provide
More informationTURBO-AIR 2000 Centrifugal Compressor
TURBO-AIR 2000 Centrifugal Compressor 100% oil-free air* *Per ISO 8573-1 certification Benefits of TURBO-AIR Compressors ISO 8573-1 CERTIFIED OIL-FREE AIR Prevents oil contamination of your system Limits
More informationMD6250. Rotary Blasthole Drill Specifications 11.2 or 13.6 m (36.7 or 44.6 ft) Mast Configurations. Description. Basic Specs (continued) Basic Specs
MD6250 Rotary Blasthole Drill Specifications 11.2 or 13.6 m (36.7 or 44.6 ft) Mast Configurations Description The MD6250 crawler-mounted blasthole drill is designed to drill from 152-250 mm (6-9.8 in)
More informationSmartROC C50 Surface drill rig for quarrying, mining and construction
SmartROC C50 Surface drill rig for quarrying, mining and construction Hole diameter: 90 140 mm (3.5 5.5") 1 Speed, power and precision The SmartROC C50 from Epiroc gives you the best of both worlds. The
More informationMD5075. Track Drill. General Data. Hole Depth Maximum 31 m ft. Compressor 9.9 m 3 /min 350 ft 3 /min Rock Drill HPR kw 25 hp
MD5075 Track Drill General Data Hole Diameter Range 76.2 mm-127 mm 3.0-5.0 in Hole Depth Maximum 31 m 102.5 ft Engine C9 Tier 3 224 kw (300 hp) at 1,800 rpm Compressor 9.9 m 3 /min 350 ft 3 /min Rock Drill
More informationFLSERIES - LP12. Fuel Lube Vehicle AT A GLANCE OPTIONS FEATURES & BENEFITS. High speed / high mobility underground fuel lubrication vehicle.
FLSERIES - LP12 Fuel Lube Vehicle AT A GLANCE Weights & Dimensions: Operating Weight Overall Tramming Length Overall Width 27,000 lb (12,273 kg) 27-2 (8.3 m) 7-0 (2.13 m) Tramming Height Carrier Articulation
More information860C/870C/L870C FELLER BUNCHERS
860C/870C/ FELLER BUNCHERS The C-series feller bunchers Tigercat 860C, 870C and feller bunchers are high production, extreme duty, final fell machines. They are well suited to large timber, mixed stands,
More informationMOBILE GANTRY CRANE. DB Series US Tons
MOBILE GANTRY CRANE DB Series 30 50 70 100 140 200 US Tons LEGENDARY QUALITY and design that s more economical than ever! The evolution continues with unmatched value. Designed with you in mind. With a
More informationMINI-EXCAVATOR. ViO38U. 3750/3965 kg. Call for Yanmar solutions
MINI-EXCAVATOR 3750/3965 kg Call for Yanmar solutions COMPACTNESS The is a true Zero Tail Swing machine: neither the counterweight nor the front part of the upper frame exceed the width of the crawlers.
More informationRobbins 34RH. Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter
Robbins 34RH Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter 1 Raising the bar in versatility The Robbins 34RH is a low profile, lightweight raise drill rig for holes of
More information305 CR. Mini Hydraulic Excavator. Stage II Compliant. Engine Power kw/42 hp. Maximum Operating Weight
305 CR Mini Hydraulic Excavator Stage II Compliant Engine Power Gross Net Maximum Operating Weight With cab With canopy 32 kw/43 hp 31.3 kw/42 hp 4990 kg 4940 kg 305 CR Mini Hydraulic Excavator Designed
More informationRC DRILLING DEPTH GUIDELINES DRILL ROD / CORE BARREL. Hole Depth METRIC. Hole Depth U.S. 4 (101,6 mm) 700 m ft. 4-1/2 (114,3 mm) 600 m 1.
Drilling depth capacity s are based on feedback from field operatives and can be reasonably expected with vertical, water filled holes, by well-trained drilling crew using high quality drilling tools.
More informationFlexiROC T30 R Quarry Edition Surface drill rig for quarrying and construction
FlexiROC T30 R Quarry Edition Surface drill rig for quarrying and construction Hole diameter: 45 89 mm (1.75 3.5 ) Pioneering productivity The FlexiROC T30 R quarry edition is a tophammer rig designed
More information308D CR. Mini Hydraulic Excavator with Fixed Boom. Engine Power. Weight
308D CR Mini Hydraulic Excavator with Fixed Boom Engine Power Net power Gross power Weight Operating weight 41.5 kw/56.5 hp 43.0 kw/58.5 hp 7850 kg Features 308D CR with Fixed Boom Controllability Perfectly
More information308E. Mini Hydraulic Excavator
308E Mini Hydraulic Excavator Engine Weights Engine Model Cat C3.3 DI Turbo Operating Weight Standard Stick 7160 kg Net Power @ 2,400 rpm 46.8 kw Operating Weight Long Stick 7190 kg Gross Power @ 2,000
More informationMOBILE GANTRY CRANE. DB Series US Tons. Courtesy of Crane.Market
MOBILE GANTRY CRANE DB Series 30 50 70 100 140 200 US Tons LEGENDARY QUALITY AND DESIGN THAT S MORE ECONOMICAL THAN EVER! The evolution continues with unmatched value. Designed with you in mind. With a
More informationSB-85 PIPELAYER. Net Horsepower 238 kw (320 hp) Max Lifting Capacity kg (220,460 lb) Operating Weight kg (134,700 lb)
SB-85 PIPELAYER Net Horsepower 238 kw (320 hp) Max Lifting Capacity 100 000 kg (220,460 lb) Operating Weight 61 100 kg (134,700 lb) SB-85 PIPELAYER High stability and low ground pressure Easy operation
More informationDR412i DEPENDABILITY DEFINED
DR412i DEPENDABILITY DEFINED 1 2 A HISTORY OF INNOVATION 1862 PRESENT Only one thing can take a company from a small town in Sweden to a worldwide operation. Innovation. With it, we ve created a legacy
More informationHighwall Mining System
Highwall Mining System Highwall Miner: Bridging the Gap Linking underground and surface mining operations, the Cat highwall mining system is a testament to versatile mining equipment. It offers a safe
More informationEC210B LC EC210B NC/EC210B NLC
VOLVO EXCAVATOR EC210B LC EC210B NC/EC210B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 119 kw (159 hp) Operating weight: LC: 21,3 ~ 22,3 t NC: 20,9 ~ 21,8 t NLC: 21,5 ~ 22,2 t Buckets (SAE): 750 ~
More informationEC55D. Volvo Compact Excavators t 36.5 kw
EC55D Volvo Compact Excavators 5.4-5.63 t 36.5 kw A machine you can rely on Volvo s EC55D high quality compact excavator is designed to work harder for longer. Using high quality components and Volvo design,
More informationPCSERIES - LP12. Personnel Carrier Vehicle AT A GLANCE OPTIONS FEATURES & BENEFITS. High speed / high mobility underground personnel carrier vehicle.
PCSERIES - LP12 Personnel Carrier Vehicle AT A GLANCE FEATURES & BENEFITS Weights & Dimensions: Operating Weight Overall Tramming Length Overall Width 26,000 lbs (11,818 kg) 29-8 (9.05 m) 7-3 (2.2 m) Tramming
More informationComplete Component Catalog
Complete Component Catalog Valuepart for the Best in Quality Valuepart is committed to providing customers with the Highest Quality products available in the industry. Rigid Quality and Application standards
More informationAgricultural Drive and Motion Systems
Agricultural Drive and Motion Systems Dana s market-leading Spicer and Brevini drive and motion system products maximize agricultural vehicle performance. Drive and motion systems to meet your agricultural
More informationSoil Stabilizer/Reclaimer SX-6 SOIL STABILIZER/RECLAIMER. SX-6e/ex. ENGINE SX-6e: Tier 4f; Cummins QSX hp (503 2,100 rpm
SOIL STABILIZER/RECLAIMER SX-6e/ex Soil Stabilizer/Reclaimer SX-6 ENGINE SX-6e: Tier 4f; Cummins QSX-15 675 hp (503 kw) @ 2,100 rpm SHIPPING WEIGHT 83,480 lbs* (37,865 kg) * 120 gal fuels & water/injection
More information303.5E CR, 304E CR, 305E CR, 305.5E CR
303.5E CR, 304E CR, 305E CR, 305.5E CR Mini Hydraulic Excavators 303.5E CR 304E CR 305E CR 305.5E CR Engine Engine Model Cat C1.8 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 23.6 kw (31.6 hp) 30 kw
More informationBoomer T1. Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m²
Boomer T1 Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m² Prime performance packed into a small, versatile unit The Boomer T1 is an ideal rig for narrow vein
More informationVPS SERIES. Vibratory Pick Scaler - LP15 AT A GLANCE. OPTIONS 12-8 (3.86 m) FEATURES & BENEFITS
VPS SERIES - LP15 Vibratory Pick Scaler 285 VP RIES VPS SE LP15 FEATURES & BENEFITS AT A GLANCE Weights & Dimensions: Operating Weight VPS16: 45,160 lb (20,527 kg) VPS25: 46,500 lb (21,136 kg) Overall
More informationContact - Cooled Rotary Screw Air Compressors kw / HP Single-Stage kw / HP 2-Stage
Contact - Cooled Rotary Screw Air Compressors 90-250 kw / 125-450HP Single-Stage 75-350 kw / 100-500HP 2-Stage Energy Saving Control System Digital Control Our exclusive digitally controlled stepper motor
More informationSX-6. Soil Stabilizer/Reclaimer. SX-6e/ex
Soil Stabilizer/reclaimer SX-6e/ex Soil Stabilizer/Reclaimer SX-6 ENGINE SX-6e: Tier 4i; Cummins QSX15 620 hp (447 kw) Diesel @ 1,850 rpm SX-6ex: Tier 3; Cummins QSX-15 620 hp (447 kw) @ 1,850 rpm* * ex
More information305C CR. Mini Hydraulic Excavator. Diesel Engine Net Power (ISO 9249) at 2400 rpm Operating Weight (without extra counterweight)
305C CR Mini Hydraulic Excavator Diesel Engine Net Power (ISO 9249) at 2400 rpm Operating Weight (without extra counterweight) With canopy With cab 35 kw/47.6 hp 5035 kg 5155 kg Caterpillar 305C CR Mini
More informationEX5500 BACKHOE ATTACHMENT. Engine Gross Power : 2 x kw (2 x hp) Operating Weight Loading Shovel : kg ( lb) Backhoe only
EX00 BACKHOE ATTACHMENT Bucket assembly with bucket points Weight: 29 200 kg (6 390 lb) Capacity: 29.0 m3 (38.0 yd3; PCSA heaped) Width: 3 900 (12'") BE-Arm assembly Weight: 37 000 kg (81 600 lb) Width:
More information