Time-Table of U.G/ P.G Practical Examination November No. of Students per session
|
|
- Louise Hopkins
- 5 years ago
- Views:
Transcription
1 Time-Table of U.G/ P.G Practical Examination vember 2015 Branch:B.Tech Civil Engineering Date of Exam. of s Register s. Internal Examiner Venue Civil Engineering A 9.15 am to ,1096,1114,1 126, , 22-26, 28-40,1042,1044, ,52-57, , Ms.A.Catherine Anna Pushpam / Dr. Sahidul Islam Lang. Lab I Civil Engineering B AN 1.15 to , , , ,1114, , Dr. H. Sofia / Dr. P. Rathna Lang. Lab I Civil Engineering C 9.15 am to , , , Dr. Sahidul Islam / Ms.A.Catherine Anna Pushpam Lang. Lab II
2 Time-Table of U.G/ P.G Practical Examination vember 2015 Subject Code & Subject: ENB 3181 Career Building & People Skills Branch:B.Tech Civil Engineering Venue : BS Block Date of Exam. of s Per session Register s Internal Examiner Venue Civil Engineering A V 9.15 am to , , 1004, , , Dr. P. Rathna BS Civil Engineering B V AN 1.15 to , , , , Dr. Shahin Sultana BS Civil Engineering C V 9.15 am to , , , , ,1105, , , , , ,1127, Dr. P.M.Usha Rani BS-106
3 Time-Table of U.G / P.G Practical Examination vember 2015 Degree&Branch: B.Tech Mechanical Engineering Date of Exam Mechanical Engineering -D Mechanical Engineering-A Mechanical Engineering-B Mechanical Engineering- C AN 1.15 to am to12.15 AN 1.15 to 4.15 AN 2.00 to of s per session Register s ,95-99, ,27, 29-32,34, ,23,25.27, ,31-43,45,47-52,54-58, ,2004,2005,2007, 2009, ,97-103, ,1235,2001,2003,2006,2010, , to ,54-55,57-74, , , , 19-20,2028 Internal Examiner Mrs. Grace Vinitha / Dr. P.M.Usha Rani Mrs. Grace Vinitha / Mr. S. VijayaKumar Dr. P.M.Usha Rani/ Mrs. Grace Vinitha Mr. S. VijayaKumar/ Ms.A.Catherine Anna Pushpam Venue Lang. Lab.II Lang. Lab I Lang. Lab II Lang. Lab II
4 Time-Table of U.G / P.G Practical Examination vember 2015 Branch:B.Tech Polymer Technology Venue. of s Register s. Internal Examiner Polymer Technology 9.15 am to to 1020, , 1031, , Mr. S. VijayaKumar/ Dr. H. Sofia Lang. Lab. II
5 Time-Table of U.G / P.G Practical Examination vember 2015 Branch: B.Tech Electrical & Electronics Engineering Venue. of s Register s. Internal Examiner Electrical & Electronics Engineering 9.15 am to ,04-18, , ,1050, , Mrs. Grace Vinitha/ Dr. H. Sofia Lang. lab. I
6 Time-Table of U.G / P.G Practical Examination vember 2015 Branch:B.Tech Electronics & Communication Engineering. of s Register s. Internal Examiner Venue ECE B ECE A A.N 1.15 to 4.15 A.N 1.15 to , , , , , , , Mrs. Grace Vinitha /Dr.Revathi Viswanathan Dr.H.Sofia / Dr. Sahidul Islam Lang. Lab I Lang. Lab I
7 Time-Table of U.G / P.G Practical Examination vember 2015 Branch:B.Tech Electronics& Instrumentation Engineering. of s Register s. Internal Examiner Venue EIE A.N 1.15 to , , Dr.H.Sofia Lang. Lab II \
8 Time-Table of U.G / P.G Practical Examination vember 2015 Branch:B.Tech Computer Science & Engineering. of s Register s. Internal Examiner Venue CSE - A 9.15 am to , ,1016, , , , Dr. Sahidul Islam/Ms.A.Catherine Anna Pushpam Lang. Lab II CSE - B 9.15 am to to ,64-76,79-80, 82-84, Mr.S.Vijayakumar/ Ms.A.Catherine Anna Pushpam Lang. Lab I
9 Time-Table of U.G / P.G Practical Examination vember 2015 Branch:B.Tech Information Technology. of s Register s. Internal Examiner Venue IT A.N 1.15 to , ,24-33,35-36,38,40-43,45-47,49-53, Dr.P.Rathna /Mr. S. VijayaKumar Lang. Lab. II
10 Time-Table of U.G / P.G Practical Examination vember 2015 Branch:B.Tech Aerospace Engineering. of s Register s. Internal Examiner Venue Aeronautical 9.15 am to , Mr. S. VijayaKumar Lang. lab. II
11 Time-Table of U.G / P.G Practical Examination vember 2015 Branch:B.Tech Automobile Engineering. of s Register s. Internal Examiner Venue Automobile 9.15 am to , ,07-08, ,1018, ,1023, ,1029, , ,41-45,,49-52,54-57,59, Dr..Sahidul Islam / Dr. Shahin Sultana Lang. Lab. II
12 Time-Table of U.G / P.G Practical Examination vember 2015 Branch:B.Tech Biotechnology & Cancer Biotech. of s Register s. Internal Examiner Venue Biotech A am to12.15 Biotech B to ,53-63, ,1003, ,1013, , Mrs. Catherine Anna Pushpam/ Mrs. Grace Vinitha Lang. Lab. I
13 Time-Table of U.G / P.G Practical Examination vember 2015 Arrear Examinations Subject Code & Subject: ENB Written Communication ENB Oral Communication ENB 102 Communication Skills lab. I ENB 201- Communication Skills Lab. II Branch:B.Tech All Branches. of s Register s. Internal Examiner Venue B.Tech. All branches A.N 1.15 to Dr. Sahidul Islam / Dr. P. Rathna Lab I
14
INDIAN INSTITUTE OF TECHNOLOGY BOMBAY
INDIAN INSTITUTE OF TECHNOLOGY BOMBAY No.Acad/UG/ITT/Autumn/18 19 Academic office 12 th June, 2018 Sub : Autumn Semester timetable for UG & PG common courses & General Slot Pattern for all other UG/PG
More informationAcademic Course Description
BEE305- ELECTRICAL MACHINES Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Electrical and Electronics Engineering BEE305- ELECTRICAL MACHINES Third Semester,
More informationGRADE CARD. Letter Grade. IT 701 Internet Technology C IT 702 Multimedia C IT 703A E-Commerce A
Sl. No. 1415390 For the FOURTH YEAR B.TECH (IT) FIRST SEMESTER EXAMINATION OF 2016-2017 Name MD ZEESHAN Roll No. 12101106021 Registration No. 121010110083 OF 2012-2013 s Offered IT 701 Internet Technology
More informationINDIAN INSTITUTE OF TECHNOLOGY BOMBAY
INDIAN INSTITUTE OF TECHNOLOGY BOMBAY No.Acad/UG/ITT/Autumn/17-18 Academic office 3 rd April, 2017 Sub : Autumn Semester timetable for UG & PG common courses & General Slot Pattern for all other UG/PG
More informationB.Tech. Final Year (Mechanical) Projects Supervised: 1. Development of Transient Droplet Combustion Model. (1995).
Annexure-I Theory Courses Taught (UG Level): 1. Basic Thermal Science (B.Tech 1st Year). 2. Applied Thermodynamics (B.Tech II Year Mechanical). 3. Energy Conversion Systems (Pre final Year). 4. Power Plant
More informationMECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL. (09 January 2016)
MECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL (09 January 2016) Sl. No. Table ME- 1 B.Tech. (Mechanical Engineering) - 2015 Batch onwards Code COURSE
More informationAutomotive. Automotive Body and Repair
Automotive Body and Repair This program is designed to prepare the student for employment as a body repair and paint apprentice in privately owned repair shops or automotive dealerships. A student could
More informationMAINTENANCE AND REPAIR MAINTENANCE AND REPAIR( COMMUNICATION SKILLS ENGINEERING SCIENCE COMPUTER HARDWARE ELECTRONICS (THEORY)
COMPUTER NO. EXAM NO. ENGINEERING MATHEMATICS COMPUTER HARDWARE MAINTENANCE AND REPAIR( PRACTICAL) COMPUTER HARDWARE MAINTENANCE AND REPAIR (THEORY) ENGINEERING SCIENCE COMMUNICATION SKILLS ELECTRONICS
More informationDEPARTMENT OF AUTOMOBILE ENGINEERING CURRICULUM. B. Tech. AUTOMOBILE ENGINEERING. In Specialization with MOTORSPORT ENGINEERING
DEPARTMENT OF AUTOMOBILE ENGINEERING CURRICULUM (Applicable for Students admitted from Academic Year 2015-16) B. Tech. AUTOMOBILE ENGINEERING In Specialization with MOTORSPORT ENGINEERING SCHOOL OF MECHANICAL
More informationD BDwbU fwz cix v
D RxeweÁvb Abyl` D BDwbU fwz cix v 2018-2019 RxeweÁvb Abyl` Rvnv½xibMi wek we` vjq Avmb web v mi mvi-ms c BDwbU/ Abyl` ZvwiL wkd&u mgq fwz cix vi ivj b ^i 1g 9:00 _ K 10:00 ch ší 410001 418313 2q 10:30
More information3/1,3/2,3/3,3/4,3/5,3/7=21 Venue: 3/1 G407 Social Studies (O) 1 h 45 min Ms S Yam All=219. Art (AEP 3) (O) 2 h Mrs Yeoh T T
SEC 3E & 3NA END-OF-YEAR EXAMINATION TIME-TABLE 2018 Venue: Hall DATE SUBJECT DURATION TIME COORDINATOR REMARKS 25 Sept Art (AEP 3) (O) 1530-1730 Mrs Yeoh T T 3/1,3/2,3/3,3/4,3/5,3/7=21 Venue: 3/1 G407
More informationGUJARAT TECHNOLOGICAL UNIVERSITY
Examination 330001 HUMAN RESOURCE MANAGEMENT 3 0 0 3 70 20 10 100 2 330201 THERMODYNAMICS & HYDRAULICS 2 0 0 2 70 20 10 100 2 330202 MANUFACTURING PROCESS & MATERIAL TECHNOLOGY GUJARAT TECHNOLOGICAL UNIVERSITY
More informationDIPLOMA IN MECHANICAL ENGINEERING (1020) Date and Day. Subject code
DIPLOMA IN MECHANICAL ENGINEERING (1020) code ( M-Scheme ) 32031 Strength of Materials 32032 Manufacturing Processes 32033 Machine Drawing I 1.11.2018 1 32041 Heat Power Engineering 32042 Special Machines
More informationSTUDY AND EVALUATION SCHEME FOR DIPLOMA PROGRAMME UNIVERSITY POLYTECHNIC, A.M.U., ALIGARH
Semester: - First sem exam 1 BPH-101 Applied Physics-I 2-2 5 10 35 50 2 BCH-101 Applied Chemistry-I 2-2 5 10 35 50 3 BMA-101 Applied Math-I 5-3 10 15 75 100 4 BME-103 Engg. Drawing-I - 4 3 50 15 35 100
More informationSUBJECT CODES FOR VARIOUS COURSES UNDER JNTU KAKINADA
SUBJECT CODES FOR VARIOUS COURSES UNDER JNTU KAKINADA COURSE BRANCH REG YEAR SEM SUBJECT TITLE CODE CODE B.Tech 01 R10 1 1 R10111 ENGLISH PROFICIENCY B.Tech 01 R10 1 1 R10108 ENGINEERING PHYSICS AND ENGINEERING
More informationUNIVERSITY OF CALICUT (Pareeksha Bhavan)
No.EG1/2/22875/2010 UNIVERSITY OF CALICUT (Pareeksha Bhavan) Calicut University P O 673635 Dated: 05-01-2017 NOTIFICATION In continuation to the notification of even No. dated;04-11-2016, it is notified
More informationThe Kavery Group Of Institutions
The Kavery Group Of Institutions All Rights Reserved kavery.org.in Page PLACEMENT REPORT 26-7-BATCH The Kavery Engineering College & The Kavery College of Engineering All Rights Reserved kavery.org.in
More informationGUJARAT TECHNOLOGICAL UNIVERSITY
GUJARAT TECHNOLOGICAL UNIVERSITY Draft Teaching Scheme : B.E. Course : (W.E.F.: 2016-2017) Aeronautical Engineering (01) Theory Marks utorial/ Practical Mark Total Branch Aircraft Design II 4 0 2 6 70
More informationEnd of Cycle 2015 Data Resources DR3_019_01 Acceptances by Detailed subject group and sex
End of Cycle 2015 Data Resources DR3_019_01 Acceptances by Detailed subject group and sex Statistic: Number of Acceptances Variables:, Cycle Year Coverage: All Definitions Sex Sex as declared by the applicant.
More informationGUJARAT TECHNOLOGICAL UNIVERSITY
Branch Code : 02 DIPLOMA IN AUTOMOBILE ENGINEERING (Semester IV) Subject Code GUJARAT TECHNOLOGICAL UNIVERSITY Subject Name Teaching Scheme(Hours) Credits Examination Marks Total Theory Tutorial Practical
More informationB.TECH - VIII SEMESTER
B.TECH - VIII SEMESTER TIME TABLE FOR CONTINUOUS ASSESSMENT TEST - 1 (18.02.2019 to 19.02.2019) DATE / BRANCH 18.02.2019 19.02.2019 CIVIL CEBX 37 GEBX 201 / GEBX 213 / GEBX 205 MECH MEBX 06 / MEBX 21 /
More informationDeenbandhu Chhotu Ram University of Science and Technology, Murthal
Deenbandhu Chhotu Ram University of Science and Technology, Murthal Fee Structure for Regular U.G. Courses (B.Tech./B.Arch.) w.e.f. the Session 2017-18. 1 Admission Fee and Registration Fee Rs 3000 2 Alumni
More informationAutomotive Curriculum
Automotive Curriculum Degrees: Credential(s) AAS: Automotive Technology Tracks: Automotive Technician Track 69-72 Automotive Parts/Service Writer Track 61-64 Diploma: Automotive Technician 61-64 Automotive
More informationSRIRAM ENGINEERING COLLEGE DEPARTMENT OF AUTOMOBILE ENGINEERING
SRIRAM ENGINEERING COLLEGE DEPARTMENT OF AUTOMOBILE ENGINEERING Name & Photo Dr. B. RAJENDRA PRASATH Designation Professor & Head Qualification UG(Specialization) Mechanical Engineering PG(Specialization)
More informationDiesel Technology: Fundamentals/Service/Repair By Andrew Norman, John A. Corinchock READ ONLINE
Diesel Technology: Fundamentals/Service/Repair By Andrew Norman, John A. Corinchock READ ONLINE Associate of Applied Science Concentration in Diesel Technology in a number of careers; service technician,
More informationCHANGE OF MAJOR INFORMATION
2017-2018 CHANGE OF MAJOR INFORMATION Revised Lower Division Students (Less than 90 units overall) s that are not impacted must accept change of major requests from lower division students in good standing
More informationTEST 1 SESSION I-2012 (MAY 2012) INTERNATIONAL COLLEGE OF AUTOMOTIVE
TEST 1 SESSION I-2012 (MAY 2012) INTERNATIONAL COLLEGE OF AUTOMOTIVE DATE/DAY TIME MODULE CODE MODULE PROGRAMME SEM PLACE MAS 1023 (1 HOUR) INTRODUCTION TO BODYSHOP DVA 1A (16) SEM 1 MPH DVA 1B (6) SEM
More informationAutomotive Service and Technology
144 Automotive Service Degrees and Certificates Associate in Science Degree: Automotive Service Certificate of Achievement: Automotive Service Program Description The automotive industry has long recognized
More informationACSEP - Applications and Control of Power Electronic Systems
Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2018 205 - ESEIAAT - Terrassa School of Industrial, Aerospace and Audiovisual Engineering 710 - EEL - Department of Electronic Engineering
More informationAutomotive Service and Technology
158 Automotive Service & Technology Automotive Service and Technology Degrees and Certificates Associate in Science Degree: Automotive Certificate of Achievement: Automotive Program Description The automotive
More informationELEC 585/462 MOTOR DRIVE DYNAMICS COURSE OUTLINE & ASSESSMENT TECHNIQUES SEPT- DEC / FALL 2013 CRN 11254/11246
ELEC 585/462 MOTOR DRIVE DYNAMICS COURSE OUTLINE & ASSESSMENT TECHNIQUES SEPT- DEC / FALL 2013 CRN 11254/11246 Instructor: Office Hours: Dr. S. Nandi Days: Any time by appointment Phone: 721-8679 Location:
More informationPRIME MINISTER S HIBISCUS AWARD
PRIME MINISTER S HIBISCUS AWARD Recognising Environmental Excellence Terengganu, Pahang & Kelantan State Briefing The Chairman and Members of the Organising Committee of the Prime Minister s Hibiscus Award
More informationGUJARAT TECHNOLOGICAL UNIVERSITY DIPLOMA 4TH SEMESTER REGULAR SUMMER EXAM TIMETABLE
GUJARAT TECHNOLOGICAL UNIVERSITY DIPLOMA 4TH SEMESTER REGULAR SUMMER - 2013 EXAM TIMETABLE NO:- GTU/DIP/SUMMER - 2013/2987 DATE:-20-04-2013 SUBJECT CODE SUBJECT NAME EXAM DATE EXAM TIME 02 AUTOMOBILE ENGG
More informationAUTO 140A: VEHICLE MAINTENANCE
AUTO 140A: Vehicle Maintenance 1 AUTO 140A: VEHICLE MAINTENANCE Discipline AUTO - Automotive Technology Course Number 140A Course Title Vehicle Maintenance Catalog Course Description Intended for the incumbent
More informationSEMESTER -- I (Common to all branches) (Group A) TOTAL
SEMESTER -- I (Common to all branches) (Group A) Sr. No. Course No. Subject L T P Evaluation Sess. End Total Credit Type TH1 AM-101 MATHEMATICS-I 310 30 70 100 4H TH2 HU-102 COMMUNICATION SKILLS 210 30
More informationIC Chapter 8. Motorcycle License Endorsement or Learner's Permit
IC 9-24-8 Chapter 8. Motorcycle License Endorsement or Learner's Permit IC 9-24-8-0.5 Operator of autocycle not required to hold motorcycle learner's permit Sec. 0.5. The operator of an autocycle is not
More informationAUTOMOTIVE TECHNOLOGY (AUTO)
Automotive Technology (AUTO) 1 AUTOMOTIVE TECHNOLOGY (AUTO) AUTO 100 Automotive Technology and Maintenance for the Consumer 3 Units (AA/AS; CSU) 54 lecture hours, 18 lab hours Intended for non-majors.
More informationCOMPANY PROFILE MAY 2018
COMPANY PROFILE MAY 2018 FOUNDATION PAGE 1 STRUCTURE PAGE 3 EXPERT TEAM PAGE 5 CONTENT TECHNOLOGY IPs PAGE 7 PRODUCTION and R&D PAGE 9 FOUNDATION PAGE 1 PAGE 2 FROM THE BEGINNING TO DATE Former General
More informationOPPORTUNITY FOR MECHANICAL ENGINEERS IN IISC BANGALORE
OPPORTUNITY FOR MECHANICAL ENGINEERS IN IISC BANGALORE IMPORTANT DATES: Start of Application: 01 Feb 2018 Last Date of Online Application: 26 March 2018 CORIOLIK 2018. All Rights Reserved. Page 1 M.Tech:
More informationFALL 2007 MBA EXIT SURVEY (Sample size of 29: 15 responses from the San Marcos location and 14 responses from the RRHEC location)
FALL 2007 MBA EXIT SURVEY (Sample size of 29: 15 responses from the San Marcos location and 14 responses from the RRHEC location) EVALUATION OF MBA CURRICULUM Scale items: 1 = Very Satisfied 6 = Very Dissatisfied
More informationAutomobile Engineering
xiii xiv Course Code DEPARTMENT OF AUTOMOBILE ENGINEERING Course title xv Prerequisites Co-requisites SEMESTER - I 15PD101 Soft Skills 15MA101 Calculus And Solid Geometry 15PY101 Physics 15PY101L Physics
More informationDiesel Technology Medium and Heavy Truck Technician Diploma
Diesel Technology Medium Heavy Truck Technician Diploma Open Admissions Diploma Maysville Community Technical College Rowan Campus Program Coordinator: Dennis Swartz 606/78-158 ext 6641, Office A-04 E-Mail:
More informationQMC (Boom Truck) LOAD CHART
For Use in CCO Written Examinations QMC (Boom Truck) CHART TELESCOPIC RESTRICTED These charts have been adapted from the original manufacturer s charts for use in CCO Written Examinations. This supplement
More informationINSTITUT MINES-TELECOM
INSTITUT MINES-TELECOM The French Higher Education & Research Institute dedicated to Innovation, Management, Technology Jane GENG - 2018 WHY INSTITUT MINES-TELECOM? STUDYING ENGINEERING IN FRANCE: A CHOICE
More informationstudents (mostly MS level, partially BS and PhD) academic staff
The (established 1707) and the Mechanical Engineering Faculty of the CTU 8 faculties - Civil Eng, MechEng, ElEng, Informatics, NucEng, TranspEng, BioMedEng and Architecture/Styling 21 000 students (mostly
More informationCURRICULUM VITAE. Dr. PRAVEEN R.P. Professional Objective:
CURRICULUM VITAE Dr. PRAVEEN R.P Professional Objective: To prove myself as a dedicated and energetic employee in a progressive organization that gives me scope to apply my knowledge and skills and be
More informationBasics of test: Sand cylinder of mix is 10 Hz either in stress or strain a target temperature until specimen fails Test uses a
Basics of test: Sand cylinder of mix is tested @ 10 Hz either in stress or strain control @ a target temperature until specimen fails Test uses a standard Ottawa sand 20-30 mesh SHORT HISTORY OF TEST METHOD
More informationGreen Mobility Technology Roadmap
Green Mobility Technology Roadmap Prof. Dr.-Ing. Horst E. Friedrich Institute of Vehicle Concepts German Aerospace Center (DLR) SCCER-Mobility 1st Annual Conference at ETH Zürich 11 th September 2014 www.dlr.de
More informationTRANSFER COURSE AGREEMENT WEST VIRGINIA STATE COLLEGE AND SOUTHERN WEST VIRGINIA COMMUNITY AND TECHNICAL COLLEGE
SOUTHERN WV STATE COLLEGE 12/29/01 1 TRANSFER COURSE AGREEMENT WEST VIRGINIA STATE COLLEGE AND SOUTHERN WEST VIRGINIA COMMUNITY AND TECHNICAL COLLEGE ACCOUNTING AC 111 BA 215 AC 112 BA 216 AC 113 AC 211
More informationDAT105: Computer Architecture Study Period 2, 2009 Exercise 2 Chapter 2: Instruction-Level Parallelism and Its Exploitation
Study Period 2, 29 Exercise 2 Chapter 2: Instruction-Level Parallelism and Its Exploitation Mafijul Islam Department of Computer Science and Engineering November 12, 29 Study Period 2, 29 Goals: To understand
More informationCENTRAL TEXAS COLLEGE AERM 1445 AIRCRAFT ELECTRICAL SYSTEMS-A. Semester Hours Credit: 4 INSTRUCTOR: OFFICE HOURS:
A. INTRODUCTION CENTRAL TEXAS COLLEGE AERM 1445 AIRCRAFT ELECTRICAL SYSTEMS-A Semester Hours Credit: 4 INSTRUCTOR: OFFICE HOURS: A. An aviation maintenance technician must understand the basic electrical
More informationAC : MAGNETO-RHEOLOGICAL FLUIDS REVOLUTIONIZING POWER AND CONTROL SYSTEMS
AC 2007-300: MAGNETO-RHEOLOGICAL FLUIDS REVOLUTIONIZING POWER AND CONTROL SYSTEMS John Marshall, University of Southern Maine JOHN MARSHALL received his Ph.D. from Texas A&M University and is the Internship
More informationEducational qualification:
hoto S.RAJKUMAR Designation: Assistant Professor (SG) Manakula Vinayagar Institute of Technology, Madagadipet, Puducherry, Pin code 605 107. E mail: rajkumareee@mvit.edu.in Phone: 0413-2680020 Mobile:
More informationIndian Institute of Technology Indore 2015 Autumn Semester: Class Time Table for 1st Year B.Tech. (w.e.f. 27th July 2015)
Day / Time 9:00-9:55 10:00-10:55 11:05-12:00 12:00-13:00 13:00-14:00 14:00-15:00 15:00-16:00 16:00-17:00 2015 Autumn Semester: Class Time Table for 1st Year B.Tech. (w.e.f. 27th July 2015) ME 153 (L) MA
More informationThe Graduate Diploma in Engineering is an AQF Level 8 qualification with a standard full-time duration of 1 year.
Graduate Diploma in Engineering (GDipE) 2015 These Program Rules should be read in conjunction with the University's policies (http://www.adelaide.edu.au/policies). Overview Graduate Diploma in Engineering
More informationSTUDY AND EVALUATION SCHEME FOR DIPLOMA PROGRAMME UNIVERSITY POLYTECHNIC, A.M.U., ALIGARH
UNIVERSITY POLYTECHNIC, A.M.U., ALIGARH Name of the Branch- Interior Design Semester :- First Title L P Hrs. 1 BMA-101 Applied Maths-I 5 0 3 10 15 75 100 2 BPH-101 Applied Physics-I 2 0 2 5 10 35 50 3
More informationU N I V E R S I T Y O F C AL I C U T Pareeksha Bhavan
U N I V E R S I T Y O F C AL I C U T Pareeksha Bhavan TIME TABLE FOR THE FIFTH SEMESTER B.TECH (2014 Scheme) DEGREE REGULAR EXAMINATIONS NOVEMBER 2016 Time of Examination : 9.30 a.m to 12.30 p.m Maximum
More informationSUBJECT CODES FOR JNTUK R10 REGULATION I & II BTECH SEM I & II
Course SUBJECT CODES FOR JNTUK R10 REGULATION Bran ch Code Reg Yr Sem Subject Code Subject Name B.Tech 01 R10 1 1 R10109 ENGINEERING WORKSHOP LAB B.Tech 01 R10 1 1 R10101 ENGLISH-I B.Tech 01 R10 1 1 R10107
More informationArticulation Course Guide and High School Teacher Requirements
Articulation Course Guide and High School Teacher Requirements This document outlines courses approved by FV for high school articulation consideration along with teacher qualification and certification
More informationInstitutional Research and Planning 440 Day Hall Ithaca, New York PULSE Survey
Institutional Research and Planning 440 Day Hall Ithaca, New York 14853 2009 PULSE Survey The Cornell PULSE (Perceptions of Undergraduate Life and Student Experiences) Survey asks currently enrolled undergraduate
More informationCURRICULUM COURSE OUTLINE
CURRICULUM COURSE OUTLINE Course Name(s): Auto I Grade(s): 10-12 Department: Course Length: Pre-requisite: Technology Education 1 Semester (0.5 Credit) NA Textbook/Key Resource: Modern Automotive Technology
More informationAnnex 31 Collaborative Research on Polymer Electrolyte Fuel Cells
Annex 31 Collaborative Research on Polymer Electrolyte Fuel Cells Spring 2017 Workshop Graz University of Technology - Austria Graz, Austria May 15 May 16, 2017 Willkommen! International Energy Agency
More informationCode no STRONG STAINLESS STEEL BUTT HINGES
STRONG STAINLESS STEEL BUTT HINGES Code no. 60-090Q1 STRONG BUTT HINGE L 160 x B 90 x 3 With holes Code no. 60-090A STRONG BUTT HINGE L 90 x B 85 x 2.5 Without holes Code no. 60-090A1 STRONG BUTT HINGE
More informationPROGRAM OUTLINE HEAVY EQUIPMENT TECHNICIAN PRE-EMPLOYMENT PROGRAM 504 HOURS 16 CREDITS
HEAVY EQUIPMENT TECHNICIAN PRE-EMPLOYMENT School of Trades Applied Science & Management Division 2011-2012 PROGRAM OUTLINE HEAVY EQUIPMENT TECHNICIAN PRE-EMPLOYMENT PROGRAM 504 HOURS 16 CREDITS PREPARED
More informationACADEMIC TIME TABLE Session 2017/18 ( 15 Batch)
Group / Field : Bio-Medical Engineering [16] EN3023 Electronic Design Realization (L) [ASSH] EN3143 Electronic Control Systems (L) [ENTC1] EN3030 Circuits and Systems Design (L) [ ENTC1] CS3032 Computer
More informationTECHNOLOGY CLASSES. Kim Morris: Class Rule: DO WHAT IS RIGHT!! Plain and simple. Just Do It!
TECHNOLOGY CLASSES Welcome to a new semester. Listed below are guidelines that each of you will need to follow to ensure a successful class. Thank you and have a wonderful semester! Class Rule: DO WHAT
More informationBEng Honours in Aerospace, Aerospace Systems, Computer Aided, Mechanical, Manufacturing and Automotive Engineering
BEng Honours in Aerospace, Aerospace Systems, Computer Aided, Mechanical, Manufacturing and Automotive Engineering Level 4 Career Skills Development 4ENT1096 0 English - - AB Engineering Mathematics 4PAM7
More informationTraining Materials Checklist
Training Materials Checklist Program J-STD-001G MIT to train CIT Hands-on kits Purchased separately Use a web search to locate a provider for the purchase of workmanship project materials. Item Required
More informationRegistration Information (SS18, F18 and W19)
Registration Information (SS18, F18 and W19) PENDING ADMIT STUDENTS: You will be able to enroll in Summer 2018 classes when your enrollment period opens. However, you will not be allowed to enroll in upper
More informationSATHYABAMA INSTITUTE OF SCIENCE AND TECHNOLOGY (DEEMED TO BE UNIVERSITY)
SEMESTER: III BATCH: JAN 2017 Branch: ECE NAME OF THE 24.03.2018 FN SEC1302 Analog Integrated Circuits 24.03.2018 AN SEE1203 Control Systems 25.03.2018 FN SCS1202 Object oriented programming 25.03.2018
More informationAutomotive Service and Technology
146 Automotive Service Degrees and Certificates Associate in Science Degree: Automotive Service Certificate of Achievement: Automotive Service Program Description The automotive industry has long recognized
More informationCERTIFIED CONTACT CENTRE PROFESSIONAL (CCCP)
CERTIFIED CONTACT CENTRE PROFESSIONAL (CCCP) Date : 27 th 28 th vember 2017 Venue : Vistana Hotel, Kuala Lumpur Certificate of completion awarded by Western Kentucky University (USA). Workshop Description
More informationDriver CPC. A presentation to:
Driver CPC A presentation to: The key issues Why? Scope and exemptions Two types of driver CPC Who is affected and when? Offences and penalties Actions for operators Why? Level 2 operational driver training
More informationQuant Briefing: Revenues, Earnings, & Margins
Quant Briefing: Revenues, Earnings, & Margins February 19, 2018 Dr. Edward Yardeni 516-972-7683 eyardeni@yardeni.com Joe Abbott 732-497-5306 jabbott@yardeni.com Please visit our sites at blog.yardeni.com
More informationQuant Briefing: Revenues, Earnings, & Margins
Quant Briefing: Revenues, Earnings, & Margins February 6, 2018 Dr. Edward Yardeni 516-972-7683 eyardeni@yardeni.com Joe Abbott 732-497-5306 jabbott@yardeni.com Please visit our sites at blog.yardeni.com
More informationSubject Syllabus Summary Mechanical Engineering Undergraduate studies (BA) AERODYNAMIC OF AIRCRAFT Subject type:
Subject Syllabus Summary Mechanical Engineering Undergraduate studies (BA) Subject: AERODYNAMIC OF AIRCRAFT Subject type: Essential Subject code: Year: Semester: Form of studies: Full-time course Type
More informationCOURSE NUMBER & COURSE TITLE: ME 300 Fluid Power Transmission & Control
COURSE NUMBER & COURSE TITLE: ME 300 Fluid Power Transmission & Control INSTRUCTOR:, Credits: 3 Tao jianfeng REQUIRED COURSE OR ELECTIVE COURSE: Elective Language of instruction: Chinese TERMS OFFERED:
More informationEconomics and Management of Convention and Exhibition
Holiday Optional Week Career Week Degree Design Project International Cooperation Programs Other Practice Degree Practice Manufacturing Practice Social Practice General Experi Practice of Electronic Engineering
More informationAEER - Electric Drives with High Efficiency and Low Environmental Impact
Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2017 240 - ETSEIB - Barcelona School of Industrial Engineering 709 - EE - Department of Electrical Engineering MASTER'S DEGREE IN
More informationRANCHI UNIVERSITY (EXAMINATION DEPARTMENT) Bachelor of Science
RANCHI UNIVERSITY (EXAMINATION DEPARTMENT) By the order of the Vice-Chancellor, Ranchi University, Ranchi, under mentioned candidates are declared to have passed Bachelor of science Hons./Gen PART-III
More informationCORK INSTITUTE OF TECHNOLOGY INSTITIÚID TEICNEOLAÍOCHTA CHORCAÍ. Semester 2 Examinations 2008/09. Bachelor of Science in Process Plant Technology
CORK INSTITUTE OF TECHNOLOGY INSTITIÚID TEICNEOLAÍOCHTA CHORCAÍ Semester 2 Examinations 2008/09 Module Title: Process Plant Services Module Code: MECH8018 School: Mechanical Engineering. Programme Title:
More informationStudent Counselling Service Statistics
% of UEA students % of UEA students Total. of Clients 736 5.2 694 5.1 UEA Headcount 14,199 13,514 % UEA by gender % clients % UEA by gender % clients Gender Female 530 6.9 72.0 495 6.4 71.3 Male 206 3.2
More informationCA MOTOR VEHICLE FIELD REPRESENTATIVE STUDY GUIDE PDF
CA MOTOR VEHICLE FIELD REPRESENTATIVE STUDY GUIDE PDF ==> Download: CA MOTOR VEHICLE FIELD REPRESENTATIVE STUDY GUIDE PDF CA MOTOR VEHICLE FIELD REPRESENTATIVE STUDY GUIDE PDF - Are you searching for Ca
More informationElectrical Engineering By B L Theraja Objective
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with electrical engineering
More informationHAZWOPER Technician Level Course Outline
HAZWOPER Technician Level Course Outline Prerequisites: The delegate should have completed valid HAZWOPER First Responder- Operations Level training. Course Length: 8 hours Course length shall vary depending
More informationTeacher Assessment Blueprint. Diesel Technology. Test Code: 5270 / Version: 01. Copyright 2014 NOCTI. All Rights Reserved.
Teacher Assessment Blueprint Diesel Technology Test Code: 5270 / Version: 01 Copyright 2014 NOCTI. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information
More informationCity University of New York Faculty Survey of Student Experience (FSSE), Spring 2010
City University of New York Faculty Survey of Student Experience (FSSE), Spring 2010 CUNY administered the Faculty Survey of Student Experience (FSSE) in the Spring of 2010 at the 11 senior colleges, one
More informationTowing Administration Introduction Towing Operations Weak Links Aerotow Pilot (ATP) Certification
Towing Administration Standard Operating Procedure 12-10 Last Amended March, 2017 12-10.01 Introduction This SOP outlines operating procedures for towing related sections of the Pilot Proficiency System
More informationMechanical Drives
Western Technical College 10620144 Mechanical Drives Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 2.00 Total Hours 54.00 Mechanical drive components
More information1 P a g e. Job Skills Analysis for Hybrid and Alternative Fuel Automotive Technicians
Job Description for Hybrid and Alternative Fuel Automotive Technicians Job Skills Analysis Compression Planning Session Held at Columbus State Community College Center for Workforce Development Columbus
More informationCENTRAL TEXAS COLLEGE AERM 1314 BASIC ELECTRICITY-G Semester Hours Credit: 3 INSTRUCTOR: OFFICE HOURS:
I. INTRODUCTION CENTRAL TEXAS COLLEGE AERM 1314 BASIC ELECTRICITY-G Semester Hours Credit: 3 INSTRUCTOR: OFFICE HOURS: A. Electricity is a vital part of modern aviation technology. This course lays the
More informationK.L.N. COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING Course Outcomes, PO & PSO Mapping Regulation 2013
S.NO K.L.N. COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING Course Outcomes, PO & PSO Mapping Regulation 2013 SEMESTER ANNA UNIVERSITY, CHENNAI - AFFILIATED INSTITUTIONS R 2013
More informationTRANSFER COURSE AGREEMENT FAIRMONT STATE COLLEGE AND SOUTHERN WEST VIRGINIA COMMUNITY AND TECHNICAL COLLEGE
TRANSFER COURSE AGREEMENT FAIRMONT STATE COLLEGE AND SOUTHERN WEST VIRGINIA COMMUNITY AND TECHNICAL COLLEGE ACCOUNTING AC 111 ACCT 201 AC 112 ACCT 202 AC 113 ACCT Elective AC 211 ACCT 250 AC 212 ACCT 251
More informationAutomotive Technology
Degree: A.S. - Automotive Analysis A.S. - Automotive Collision Technology A.S. - Automotive Component Service Technician A.S. - A.S. - Diesel Mechanics Certificates: Automotive Analysis Automotive Claims
More informationProfessional Development Seminar Introduction to Rail Dynamics
Virginia Polytechnic Institute and State University University of Delaware University of Nevada, Las Vegas SYMPOSIUM Railroad Infrastructure Diagnosis and Prognosis October 16-17, 2018 Professional Development
More information,rrukffi* UNIVERSITY OF CALICUT (Pareeksha Bhavan) Centre: MES College of Engg.. Kuttippuram. Prepared rr, I. No. EE.V
Dated, 05.07.2016 Result of sth Semester B.Tech. (2K Scheme) December 2014 Examination Branch: B.Arch. (2K) Centre: MES College of Engg.. Kuttippuram. Reg. No. Name of Candidate P apet Extennl lntennl
More informationStudent Name Student ID # [Academic Plan Code: ; Academic Program Code: ENTC]
Industrial Maintenance Technology Associate of Applied Science Industrial Maintenance Technology Industrial Maintenance Track 4700701 Program Coordinator: Robbie Graves, (606)78-158 ext. 6651 Montgomery
More informationPERRY A. HOPKINS, P.E. SENIOR CONSULTANT
6230 Regency Parkway Norcross, GA 30071 PERRY A. HOPKINS, P.E. SENIOR CONSULTANT pahopkins@engsys.com Mr. Hopkins is an electrical engineer with experience in electrical and electronic systems design and
More informationAcoustics Certificate Courses 2015
Supporting Organization: Mechanical, Marine, Naval Architecture and Chemical Division Acoustics Certificate Courses 2015 Programme Highlights and Course Outline The Hong Kong Institute of Acoustics (HKIOA)
More informationA2 units showing 90% conversion points (cp) June 2010 series
A2 units showing 90% conversion points (cp) June 2010 series GCE Accounting F013/01 Company Accounts and Interpretation (A2) Raw 80 71 62 53 45 37 29 0 F014/01 Management Accounting (A2) Raw 120 102 89
More information