B.Tech. Final Year (Mechanical) Projects Supervised: 1. Development of Transient Droplet Combustion Model. (1995).

Size: px
Start display at page:

Download "B.Tech. Final Year (Mechanical) Projects Supervised: 1. Development of Transient Droplet Combustion Model. (1995)."

Transcription

1 Annexure-I Theory Courses Taught (UG Level): 1. Basic Thermal Science (B.Tech 1st Year). 2. Applied Thermodynamics (B.Tech II Year Mechanical). 3. Energy Conversion Systems (Pre final Year). 4. Power Plant Engineering (Final Year). 5. Fuel and Combustion Engineering (Final Year). (PG Level): Power Plant Engineering. Advanced Thermodynamics. Combustion Engineering. B.Tech. Final Year (Mechanical) Projects Supervised: 1. Development of Transient Droplet Combustion Model. (1995). 2. Effect of Ambient Conditions on Droplet Combustion (1997). 3. Study of Droplet Combustion in Convective Environment (1999). 4. Effect of Droplet Surface Temperature on its Combustion Characteristics (2000). 5. New Aspects in Transient Droplet Combustion (200l). 6. A Study into Multi-component Liquid Droplet Combustion (2002). 7. Liquid Droplet Combustion Modelling of Hydrocarbon Fuels (2003). 1

2 8. Liquid Phase Analysis of Droplet Combustion (2004). 9. Modelling of Droplet Evaporation / Combustion Phenomena in High Pressure Environment (2005). 10. Modelling of Oxygen Fuel Droplet Vaporising in Hydrogen Environment at Sub and Supercritical Pressures (2006). 11. Combustion and Emission Characteristics of Single and Bicomponent Fuel Droplets (2007). 12. Effect of Ambient Conditions and Fuels on Droplet Combustion and Emission Behaviour (2008). 13. Multi-component Droplet Combustion: Comparison between Different Models (2009). 14. Droplet Combustion Characteristics of Biodiesel Fuel Mixed with Diesel/Alkane (2010). 15. Development of Computer Codes for Evaluating Adiabatic Flame Temperature, Thermodynamic Properties and Droplet Combustion Parameters as a Function of Ambient Pressure, Temperature, Composition and Fuels (2011). 16. Evaluation of Thermodynamic Properties and Droplet Combustion Characteristics of Pure and Commercial Fuels at High Temperatures and Pressures (2012). 17. Droplet Combustion with Droplet Heating and Combustion (2013). 18. Droplet Combustion Characteristics of Commercial Fuels (2014). 19. Combustion Characteristics of Fuel Droplet and Spray (continuing). M.Tech. Dissertations Supervised: 1. 'Some Investigations into Non Steady State Droplet Combustion' 2

3 (1999). by Mr.Adnan Hafiz. 2. 'A Theoretical Analysis of Liquid Droplet Combustion and Emission Characteristics of Certain Hydrocarbon Fuels' (2006), by Mr. Shalabh Mathur. 3. 'Bicomponent Fuel Droplet Vaporization and Combustion at Ambient and High Pressures' (2006), by Mr. Vaibhav Kumar Singh. 4. Modelling of Droplet and Spray Combustion Processes (2012), by Mr. Mohd. Tauseef. 5. Burning Behaviour of Liquid Fuel Droplets (2013), by Mr. Harshit Gupta. 6. An Investigation into the Burning of Freely Falling Droplets (2014), by Mr. Naeem Ahmed. 7. Evaluation of Thermophysical Properties of Fuels at High Pressures' (2015), by Mr. Nomanuddin Hassan. Ph.D Supervision: Droplet Vaporisation Models for Spray Calculations (continuing). Innovation in Teaching: In an effort to get practical aspects of operation and maintenance of power plants, educational tours were organized for students of Power Plant Engineering and Energy Conversion Systems to Harduaganj Thermal Power Plant. Senior Engineers from Harduaganj Thermal Power Plant have been invited to deliver lectures for pre-final and final year Mechanical Engineering students. Prepared tutorial sheets for theory courses: Applied Thermodynamics (ME- 221), IInd year; Energy Conversion Systems (ME-322), Pre-final year; Fuels and Combustion Engg (ME-420), final year; Advanced Thermodynamics (ME- 641), M.Tech; Combustion Engg (ME-644), M.Tech. 3

4 Prepared handouts of various experiments in Thermal Engineering Lab: Energy Balance on a Continuous Combustion Unit (Pre-final year); Study of Steam Power Plant, Determination of Relative and Absolute Humidities using Different Psychrometers (IInd year). Helping UG and PG students in their computational work related to Droplet Combustion Problems in the Combustion Lab. Annexure-II Research Papers Published: 1. 'A Theoretical Analysis of Single Droplet Combustion of Different Hydrocarbon Fuels', Shah Shahood Alam, A.A. Nizami, Tariq Aziz et al, Proceedings of the XI National Conference on LC.Engines and Combustion, I.I.T. Madras, Published by Tata McGraw-Hill Publishing Company Limited. 2. 'A Theoretical Analysis of Transient Droplet Combustion and Emission Characteristics of Certain Hydrocarbon Fuels', Anwar Mehdi, S. Shahood Alam and A.A. Nizami, Proceedings of the XII National Conference on I.C. Engines and Combustion, I.I.P. Dehradun,1992. Published by Tata McGraw- Hill Publishing Company Limited. 3. 'An Experimental Investigation of the Effect of Fumigation of Intake Charge on the Diesel Engine Performance', Shamim Siddiqui, Nafees Ahmad II, S. Shahood Alam and Khalid Zaidi, Proceedings of the XIV National Conference on LC.Engines and Combustion, IAT, Pune,1995. Published by Tata McGraw-Hill Publishing Company Limited. 4. 'Effect of Ambient Conditions on Transient Droplet Combustion', A. Hafiz, S. Shahood Alam and A.A. Nizami, Proceedings of the XV National Conference on 1.C.Engines and Combustion, Anna University, Chennai, 4

5 1997. Published by Allied Publishers Limited. 5. A Theoretical Analysis of Non Steady Droplet Combustion and Emission Characteristics of Certain Hydrocarbon Fuels', A. Hafiz, S. Shahood Alam and A.A. Nizami, Proceedings of the First International Conference on Energy and Environment, Organized by Brunel University, U.K, in Association with The Institution of Mechanical Engineers, U.K, held at Limassol, Cyprus, Printed by Brunel University, U.K. 6. A Theoretical Analysis of Transient Droplet Combustion with Droplet Heating' S. Shahood Alam, A.A. Nizami and Tariq Aziz, Proceedings of the XVIII National Conference on I.C. Engines and Combustion, Thiruvananthapuram, Kerala, Published by the Combustion Institute (Indian Section), I.I.T. Madras, Chennai. 7. Fundamental Aspects of Droplet Combustion Modelling, S. Shahood Alam, A.A. Nizami and Tariq Aziz; Int. Journal of Engineering Research and Applications,. Vol. 4, Issue 11 (Part 3), pp , November 2014, ISSN: Single and multicomponent droplet models for spray applications, S. Shahood Alam, A. A. Nizami and Tariq Aziz; American Journal of Energy Engineering, 2014, 2 (5): , November 2014, ISSN: Published by Science Publishing Group. 9. Effect of Ambient Pressure and Droplet Size on Droplet Vaporisation and Combustion, S. Shahood Alam, A. A. Nizami and Tariq Aziz; International Journal of Scientific and Engineering Research, Vol. 4, Issue 10, October ISSN Effect of Ambient Temperature and Composition on Liquid Droplet Combustion, S. Shahood Alam; Int. Journal of Engineering Research 5

6 and Applications,. Vol.4, Issue 12 (Part 2), pp , December 2014, ISSN: Burning Behavior of Liquid Fuel Droplets, S. Shahood Alam; Int. Journal of Engineering Research and Applications,. Vol.5, Issue 6 (Part 3), pp , June 2015, ISSN: Participation in (Seminar/Conference/Symposium/Workshop/Refresher Course / Summer Institute / Orientation Course): 1. Presented Paper at the XI National Conference on I. C.Engines and Combustion held in 1989 at I.I.T. Madras, Organized by the Combustion Institute (Indian Section). 2. Q.1.P. Short Term Course on 'Pollution from Automobile Engines and its Control', held in 1989 at I.I.T. Madras. 3. Presented Paper at the XII National Conference on I.C. Engines and Combustion held in 1992 at I.I.P. (Indian Institute of Petroleum), Dehradun. 4. Attended the XIV National Conference on I.C. Engines and Combustion held in 1995 at I.A.T (Institute of Armament Technology), Girinagar, Pune. 5. Attended the Induction Training Program for Teachers (A.I.C.T.E Sponsored), held in 1996 at the Academic Staff College, A.M.U. Aligarh. 6. Presented Paper at the 'International Conference on Energy and Environment' held in October, 1997, at Limassol, Cyprus, Organised by Brunel University in association with the Institution of Mechanical Engineers, United Kingdom. 7. Attended International Workshop on 'Turbulent Reacting Flows', Organised 6

7 by CFD division, Aeronautical Society of India, held in 2002, at I.I.T. Madras. 8. Participated in the Workshop on 'Droplet and Spray Combustion' held in March 2005, at Jadavpur University, Kolkata. Extra-curricular Activities: Have been involved in the following Departmental/Administrative/Cultural activities. 1. M.Tech (Mechanical) Tabulation Work. 2. B.Tech (Mechanical) Registration. 3. In conducting B.Tech/M.Tech Mid-Semester examination. 4. Nominated by the Finance Officer, A.M.U for condemning the unserviceable and obsolete articles of IAO s Officer. 5. Appointed as Pro-Proctor by the Vice Chancellor. 6. In the past, I have been involved in M.Tech admissions in the department. 7. In organizing the National Conference on Advances in Heat Transfer and Fluid Dynamics held during September 16-17, 2006 in the department of Mechanical Engineering. 8. Membe r of various committees in organizing college week in the department. 9.In the smooth conducting of the student s union elections in the university. 10. One of the three judges who judged the event of largest envelope of the world (size 18x13 meters) for Guinness Book of World Record (April 2013). 7

SRIRAM ENGINEERING COLLEGE DEPARTMENT OF AUTOMOBILE ENGINEERING

SRIRAM ENGINEERING COLLEGE DEPARTMENT OF AUTOMOBILE ENGINEERING SRIRAM ENGINEERING COLLEGE DEPARTMENT OF AUTOMOBILE ENGINEERING Name & Photo Dr. B. RAJENDRA PRASATH Designation Professor & Head Qualification UG(Specialization) Mechanical Engineering PG(Specialization)

More information

Resume. January 21, 2016 onwards. AMU 1988 First (Hons.) 76.38

Resume. January 21, 2016 onwards. AMU 1988 First (Hons.) 76.38 General Information: Resume Page 1 Name ABU TARIQ Date of Birth May 1, 1967 Current Designation: Professor Faculty positions held: Lecturer April 16,1990-July 26, 1998 Lecturer ( Senior Scale) July 27,

More information

MAHATMA GANDHI INSTITUTE OF TECHNOLOGY Gandipet, Hyderabad

MAHATMA GANDHI INSTITUTE OF TECHNOLOGY Gandipet, Hyderabad MAHATMA GANDHI INSTITUTE OF TECHNOLOGY Gandipet, Hyderabad 500 075 1. JNTUH REGISTRATION ID : 74150329-123802 2. NAME OF FACULTY: Dr. Ch. Kesava Reddy 3. DESIGNATION : Sr.Assistant Professor 4. YEARS OF

More information

VISHNU SANKAR M.Tech (Ph.D Scholar at CUSAT), Thermal Engineering Mobile: ,

VISHNU SANKAR M.Tech (Ph.D Scholar at CUSAT), Thermal Engineering Mobile: , M.Tech (Ph.D Scholar at CUSAT), Thermal Engineering Mobile: 9567683959, 9497509992. Email: vishnusankar9369@gmail.com PERSONAL DETAILS Nationality : Indian Date of Birth : 03-10-1990 Sex : Male Marital

More information

FACULTY PROFILE. Degree Branch / Specialization College University

FACULTY PROFILE. Degree Branch / Specialization College University FACULTY PROFILE Name Designation Email ID : S.Benjamin Franklin : Assistant Professor (Sr.Gr) : benjaminfranklin.me@srit.com Area of Specialization Total Experience : Thermal Engineering : Academic : 7

More information

Educational qualification:

Educational qualification: hoto S.RAJKUMAR Designation: Assistant Professor (SG) Manakula Vinayagar Institute of Technology, Madagadipet, Puducherry, Pin code 605 107. E mail: rajkumareee@mvit.edu.in Phone: 0413-2680020 Mobile:

More information

Curriculum Vitae Dr. HAFIZUR RAHMAN Phone (Residence): ; Mobile:

Curriculum Vitae Dr. HAFIZUR RAHMAN Phone (Residence): ; Mobile: Curriculum Vitae Dr. HAFIZUR RAHMAN Phone (Residence): +91 571 2504970; Mobile: +91 9997549589 Email: hifz.rahman@gmail.com; SUMMARY OF SKILLS AND EXPERIENCE B.Sc. Engineering (Electrical), M.Sc. Engineering

More information

Faculty Vitae. Education Degree Discipline Institution Year UG BE Mechnical Madras university 1997

Faculty Vitae. Education Degree Discipline Institution Year UG BE Mechnical Madras university 1997 Faculty Vitae Name of the Faculty Dr.R.VENKATESH BABU Education Degree Discipline Institution Year UG BE Mechnical Madras university 1997 PG ME CAD Madras University 2001 PhD Ph.D IC Engines Bharath Institute

More information

SUMMARY OF SKILLS AND EXPERIENCE

SUMMARY OF SKILLS AND EXPERIENCE Curriculum Vitae Dr. HAFIZUR RAHMAN Professor, Electrical Engineering Department, AMU, Aligarh-202002, India Phone (Residence): +91 571 2504970; Mobile: +91 9997549589 Email: hifz.rahman@gmail.com; SUMMARY

More information

Pune University First

Pune University First All India Shivaji Memorable Society s COLLEGE OF ENGINEERING, RESUME 1. Name of the teaching Staff: - Choudhari Chandrakishor Shrirang 2. Designation: - ASSISTANT PROFESSOR 3. Department: Mechanical Engineering

More information

PROF. V.R.Patil. Assistant Professor CONTACT

PROF. V.R.Patil. Assistant Professor CONTACT PROF. V.R.Patil Assistant Professor CONTACT E-mail:vrpatil@aissmscoe.com Phone: + 7720073869 Office: 91 (20)26058587, Research Interests Courses Taught Qualifications 1. Basic Mechanical Engineering 2.

More information

B.Shanker. 35 Years. S.No Degree University Year of passing 1 M.Tech. N.I.T.W 2007 Power Systems Engineering 2

B.Shanker. 35 Years. S.No Degree University Year of passing 1 M.Tech. N.I.T.W 2007 Power Systems Engineering 2 Profile of Mr. B.SHANKER Name: B.Shanker Age: Permanent Address: 35 Years Islampet Opposite: L.E.F Church Bapatla-522101 Mail:shanker.bhanath@becbapatla.ac.in Educational Qualifications: S.No Degree University

More information

FACULTY PROFILE SAKKER SATH, UDASI BADA AMARAVATI

FACULTY PROFILE SAKKER SATH, UDASI BADA AMARAVATI FACULTY PROFILE NAME : DEVDAS BHIKULAL LATA DATE OF BIRTH : 16.06.1963 PERMANENT ADDRESS : Dr. D.B. LATA SAKKER SATH, UDASI BADA AMARAVATI 444 601 ADDRESS FOR : Dr. D. B. LATA CORRESPONDANCE Behind sai

More information

FACULTY PROFILE. School/Collage. JNTU College of Engineering, Kakinada. National Institute of Technology, Warangal.

FACULTY PROFILE. School/Collage. JNTU College of Engineering, Kakinada. National Institute of Technology, Warangal. FACULTY PROFILE Name of the faculty: D. SRINIVASA RAO Department: ELECTRICAL & ELECTRONICS ENGINEERING : GUDLAVALLERU ENGINEERING COLLEGE: GUDLAVALLERU Phone No: 08674-273737 (O) Mobile: 9866981707 E-Mail:

More information

INDIAN INSTITUTE OF TECHNOLOGY BOMBAY

INDIAN INSTITUTE OF TECHNOLOGY BOMBAY INDIAN INSTITUTE OF TECHNOLOGY BOMBAY No.Acad/UG/ITT/Autumn/17-18 Academic office 3 rd April, 2017 Sub : Autumn Semester timetable for UG & PG common courses & General Slot Pattern for all other UG/PG

More information

Effect of Preheating Air in Petrol Engine by Using Exhaust Gas Heat Energy

Effect of Preheating Air in Petrol Engine by Using Exhaust Gas Heat Energy ISSN 2395-1621 Effect of Preheating Air in Petrol Engine by Using Exhaust Gas Heat Energy #1 Ghorpade Sangram D., #2 Lokhande Akshay R., #3 Lagad Pradeep B. #4 Jangam Raviraj S. 1 sangramghorpade1996@gmail.com

More information

PERFORMANCE IMPROVEMENT OF A DI DIESEL ENGINE WITH TURBOCHARGING USING BIOFUEL

PERFORMANCE IMPROVEMENT OF A DI DIESEL ENGINE WITH TURBOCHARGING USING BIOFUEL ISSN: 3159-4 Vol. 2 Issue 1, January - 215 PERFORMANCE IMPROVEMENT OF A DI DIESEL ENGINE WITH CHARGING USING BIOFUEL Rasik S. Kuware, Ajay V. Kolhe Heat Power Engineering, Mechanical Department, Kavikulguru

More information

PERSONAL DATA. Position: Associate Professor (Petroleum Engineering) Cell Phone Number: +2 ( ) Work Phone and fax Number: +2 ( )

PERSONAL DATA. Position: Associate Professor (Petroleum Engineering) Cell Phone Number: +2 ( ) Work Phone and fax Number: +2 ( ) DR. SAID KAMEL ELSAYED SALEM Associate Professor (Petroleum Engineering) Suez Canal University, Faculty of Petroleum and Mining Engineering, Suez, Egypt PERSONAL DATA Position: Associate Professor (Petroleum

More information

CURRICULUM VITAE. Name : Ali Kamil Makki Al-Shaikhli Place and Date of Birth : Baghdad, Iraq, 2 nd May 1950 Languages : Arabic and English

CURRICULUM VITAE. Name : Ali Kamil Makki Al-Shaikhli Place and Date of Birth : Baghdad, Iraq, 2 nd May 1950 Languages : Arabic and English CURRICULUM VITAE Name : Ali Kamil Makki Al-Shaikhli Place and Date of Birth : Baghdad, Iraq, 2 nd May 1950 Languages : Arabic and English UNIVERSITY DEGREES Diploma (with Distinction) in Electrical and

More information

INDIAN INSTITUTE OF TECHNOLOGY BOMBAY

INDIAN INSTITUTE OF TECHNOLOGY BOMBAY INDIAN INSTITUTE OF TECHNOLOGY BOMBAY No.Acad/UG/ITT/Autumn/18 19 Academic office 12 th June, 2018 Sub : Autumn Semester timetable for UG & PG common courses & General Slot Pattern for all other UG/PG

More information

AN ANALYSIS OF EFFECT OF VARIABLE COMPRESSION RATIO IN C.I. ENGINE USING TURBOCHARGER

AN ANALYSIS OF EFFECT OF VARIABLE COMPRESSION RATIO IN C.I. ENGINE USING TURBOCHARGER AN ANALYSIS OF EFFECT OF VARIABLE COMPRESSION RATIO IN C.I. ENGINE USING TURBOCHARGER E.Saravanapprabhu 1, M.Mahendran 2 1E.Saravanapprabhu, PG Student, Thermal Engineering, Department of Mechanical Engineering,

More information

CURRICULUM VITAE. Dr. PRAVEEN R.P. Professional Objective:

CURRICULUM VITAE. Dr. PRAVEEN R.P. Professional Objective: CURRICULUM VITAE Dr. PRAVEEN R.P Professional Objective: To prove myself as a dedicated and energetic employee in a progressive organization that gives me scope to apply my knowledge and skills and be

More information

Assistant Professor, Dept. of Mechanical Engg., Shri Ram College of Engineering & Management, Banmore, Gwalior (M.P) 2

Assistant Professor, Dept. of Mechanical Engg., Shri Ram College of Engineering & Management, Banmore, Gwalior (M.P) 2 EXPERIMENTAL INVESTIGATION OF 4 STROKE COMPRESSION IGNITION ENGINE BY USING DIESEL AND PROCESSED WASTE COOKING OIL BLEND Neelesh Soni 1, Om Prakash Chaurasia 2 1 Assistant Professor, Dept. of Mechanical

More information

IJENS-RPG [IJENS Researchers Promotion Group]

IJENS-RPG [IJENS Researchers Promotion Group] Full Name Major Areas of Interest : Dr.S.Sankar : FACTS, Electrical Machines, Voltage Stability, power quality, Power system security,power System Analysis, Induction generator, renewable power generation,

More information

INFLUENCE OF THE NUMBER OF NOZZLE HOLES ON THE UNBURNED FUEL IN DIESEL ENGINE

INFLUENCE OF THE NUMBER OF NOZZLE HOLES ON THE UNBURNED FUEL IN DIESEL ENGINE INFLUENCE OF THE NUMBER OF NOZZLE HOLES ON THE UNBURNED FUEL IN DIESEL ENGINE 1. UNIVERSITY OF RUSE, 8, STUDENTSKA STR., 7017 RUSE, BULGARIA 1. Simeon ILIEV ABSTRACT: The objective of this paper is to

More information

Academic Course Description

Academic Course Description BEE305- ELECTRICAL MACHINES Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Electrical and Electronics Engineering BEE305- ELECTRICAL MACHINES Third Semester,

More information

Enhance the Performance of Heat Exchanger with Twisted Tape Insert: A Review

Enhance the Performance of Heat Exchanger with Twisted Tape Insert: A Review Enhance the Performance of Heat Exchanger with Twisted Tape Insert: A Review M.J.Patel 1, K.S.Parmar 2, Umang R. Soni 3 1,2. M.E. Student, department of mechanical engineering, SPIT,Basna, Gujarat, India,

More information

COLD FLOW ANALYSIS OF A SINGLE CYLINDER FOUR STROKE DIRECT INJECTION CI ENGINE AND ANALYSIS OF VOLUME FRACTION OF AIR USING CFD TECHNIQUE

COLD FLOW ANALYSIS OF A SINGLE CYLINDER FOUR STROKE DIRECT INJECTION CI ENGINE AND ANALYSIS OF VOLUME FRACTION OF AIR USING CFD TECHNIQUE COLD FLOW ANALYSIS OF A SINGLE CYLINDER FOUR STROKE DIRECT INJECTION CI ENGINE AND ANALYSIS OF VOLUME FRACTION OF AIR USING CFD TECHNIQUE Basanagouda C Biradar 1, Dr. S Kumarappa 2, Sarvanakumar Kandasamy

More information

Computational Investigation of Normal and Hybrid Cooling Fins of Internal Combustion Engine

Computational Investigation of Normal and Hybrid Cooling Fins of Internal Combustion Engine Computational Investigation of Normal and Hybrid Cooling Fins of Internal Combustion Engine Aswin Mohan, R. Titus, Adarsh Kumar.P.S Abstract In this research work a hybrid material (Aluminium-Copper) compound

More information

HEAT TRANSFER ANALYSIS IN A LOW HEAT REJECTION DI DIESEL ENGINE

HEAT TRANSFER ANALYSIS IN A LOW HEAT REJECTION DI DIESEL ENGINE National Journal on Advances in Building Sciences and Mechanics, Vol. 1, No.2, October 2010 6 HEAT TRANSFER ANALYSIS IN A LOW HEAT REJECTION DI DIESEL ENGINE Abstract Pradeep Kumar A.R. 1*, Annamalai K.

More information

ENERGY AND PRODUCTS APPLIED STUDIES FOR ENGINEERS. PRO2 Present and Future fuels Materials. PRO4 Gas, industrial combustion and environment

ENERGY AND PRODUCTS APPLIED STUDIES FOR ENGINEERS. PRO2 Present and Future fuels Materials. PRO4 Gas, industrial combustion and environment ENERGY AND PRODUCTS APPLIED STUDIES FOR ENGINEERS Program PRO1 Refining processes PRO2 Present and Future fuels Materials PRO3 Fuels - logistics PRO4 Gas, industrial combustion and environment PRO5 Lubrication

More information

Resume. Mahdi Hedayati (+98) RESEARCH INTERESTS

Resume. Mahdi Hedayati (+98) RESEARCH INTERESTS Resume Mahdi Hedayati (+98) 26-3418 2763 m.hedayati@kiau.ac.ir mahdi_hedayati@yahoo.com RESEARCH INTERESTS Power electronics applications in power systems and electrical drives Power converters technologies

More information

K.S.R. COLLEGE OF ENGINEERING, TIRUCHENGODE

K.S.R. COLLEGE OF ENGINEERING, TIRUCHENGODE K.S.R. COLLEGE OF ENGINEERING, TIRUCHENGODE 637 215. DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING FACULTY PROFILE 01. Name :Dr.R.SANKARGANESH 02. Designation :Assistant Professor (Sr.) 03. Date

More information

Experimental and CFD Analysis of Exhaust Manifold to Improve Performance of IC Engine

Experimental and CFD Analysis of Exhaust Manifold to Improve Performance of IC Engine International Research Journal of Engineering and Technology (IRJET e-issn: 2395-56 Experimental and CFD Analysis of Exhaust Manifold to Improve Performance of IC Engine Mr. SACHIN G. CHAUDHARI 1, Mr.

More information

Experimental Investigation of Emission Reduction by Blending Methanol, Ethanol and Biodiesel with diesel on C.I. Engine

Experimental Investigation of Emission Reduction by Blending Methanol, Ethanol and Biodiesel with diesel on C.I. Engine Experimental Investigation of Emission Reduction by Blending Methanol, Ethanol and Biodiesel with diesel on C.I. Engine V. Veeraragavan1, M. Sathiyamoorthy 2 1. Assistant Professor, Department of Mechanical

More information

Performance of copper coated spark ignition engine with methanol-blended gasoline with catalytic converter

Performance of copper coated spark ignition engine with methanol-blended gasoline with catalytic converter Journal of Scientific & Industrial Research KRISHNA & KISHOR: COPPER-COATED SI ENGINE WITH METHANOL BLENDED GASOLINE 543 Vol. 67, July 2008, pp. 543-548 Performance of copper coated spark ignition engine

More information

Curriculum Vitae. Ahmad Mohammed Khaleel Abu Jrai

Curriculum Vitae. Ahmad Mohammed Khaleel Abu Jrai Dr. AHMAD MOHAMMAD ABU-JRAI Ma'an P.O. Box 20 Jordan Tel. (office): +96232719000, Ext. 7540 Mobile: +962 777 311177 E-mail: ahmad_abujrai@ahu.edu.jo E-mail: dr.ahmad_abujrai@yahoo.com Personal Information

More information

Exhaust Waste Heat Recovery of I. C. Engine by Thermoelectric Generator

Exhaust Waste Heat Recovery of I. C. Engine by Thermoelectric Generator Exhaust Waste Heat Recovery of I. C. Engine by Thermoelectric Generator S. V. Chavan Department of Mechanical Engineering N. K. Orchid College of Engineering and Technology, Solapur, Maharashtra, India

More information

Experimental Investigation of Performance and Exhaust Emission Characteristics of Diesel Engine by Changing Piston Geometry

Experimental Investigation of Performance and Exhaust Emission Characteristics of Diesel Engine by Changing Piston Geometry Experimental Investigation of Performance and Exhaust Emission Characteristics of Diesel Engine by Changing Piston Geometry 1 Vaibhav Bhatt, 2 Vandana Gajjar 1 M.E. Scholar, 2 Assistant Professor 1 Department

More information

A STUDY ON DIESEL ENGINE PERFORMANCE DEPENDS ON BP AND BSFC BY APPLYING DIFFERENT INJECTION PRESSURE

A STUDY ON DIESEL ENGINE PERFORMANCE DEPENDS ON BP AND BSFC BY APPLYING DIFFERENT INJECTION PRESSURE International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 11, November 2018, pp. 599 603, Article ID: IJMET_09_11_059 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=11

More information

SOLAR FLAT PLATE COLLECTOR HEAT TRANSFER ANALYSIS IN THE RAISER WITH HELICAL FINS Mohammed Mohsin Shkhair* 1, Dr.

SOLAR FLAT PLATE COLLECTOR HEAT TRANSFER ANALYSIS IN THE RAISER WITH HELICAL FINS Mohammed Mohsin Shkhair* 1, Dr. ISSN 2277-2685 IJESR/May 2015/ Vol-5/Issue-5/352-356 Mohammed Mohsin Shkhair et. al./ International Journal of Engineering & Science Research SOLAR FLAT PLATE COLLECTOR HEAT TRANSFER ANALYSIS IN THE RAISER

More information

NUMERICAL INVESTIGATION OF EFFECT OF EXHAUST GAS RECIRCULATION ON COMPRESSIONIGNITION ENGINE EMISSIONS

NUMERICAL INVESTIGATION OF EFFECT OF EXHAUST GAS RECIRCULATION ON COMPRESSIONIGNITION ENGINE EMISSIONS ISSN (Online) : 2319-8753 ISSN (Print) : 2347-6710 International Journal of Innovative Research in Science, Engineering and Technology An ISO 3297: 2007 Certified Organization, Volume 2, Special Issue

More information

Electrical Engineering

Electrical Engineering Electrical Engineering FACULTY PROFILE Year (2018-19) 1. Name: Mr. Naik Yogesh R. 2. Designation: Assistant Professor 3. Qualification: M.Tech [Power Systems] 4. Area of Specialization: Power Systems 5.

More information

CURRICULUM VITAE. S.No. Degree Discipline College/University Year of Percentage/ passing CGPA/GGPA th All subjects MP Board Bhopal

CURRICULUM VITAE. S.No. Degree Discipline College/University Year of Percentage/ passing CGPA/GGPA th All subjects MP Board Bhopal CURRICULUM VITAE Dr. Naresh Kumar Raghuwanshi Assistant Professor Mechanical Engineering Department Government Engineering College Banswara, Rajasthan, India Email: raghuwanshink@gmail.com Contact No.:

More information

COURSE NUMBER & COURSE TITLE: ME 300 Fundamentals of Internal Combustion Engine

COURSE NUMBER & COURSE TITLE: ME 300 Fundamentals of Internal Combustion Engine COURSE NUMBER & COURSE TITLE: ME 300 Fundamentals of Internal Combustion Engine INSTRUCTOR: Xingcai Lu, Xinqi Credits: 3 Qiao REQUIRED COURSE OR ELECTIVE COURSE: Required COURSE STRUCTURE/SCHEDULE: 1.

More information

CFD Investigation of Influence of Tube Bundle Cross-Section over Pressure Drop and Heat Transfer Rate

CFD Investigation of Influence of Tube Bundle Cross-Section over Pressure Drop and Heat Transfer Rate CFD Investigation of Influence of Tube Bundle Cross-Section over Pressure Drop and Heat Transfer Rate Sandeep M, U Sathishkumar Abstract In this paper, a study of different cross section bundle arrangements

More information

REDUCTION OF EMISSIONS BY ENHANCING AIR SWIRL IN A DIESEL ENGINE WITH GROOVED CYLINDER HEAD

REDUCTION OF EMISSIONS BY ENHANCING AIR SWIRL IN A DIESEL ENGINE WITH GROOVED CYLINDER HEAD REDUCTION OF EMISSIONS BY ENHANCING AIR SWIRL IN A DIESEL ENGINE WITH GROOVED CYLINDER HEAD Dr.S.L.V. Prasad 1, Prof.V.Pandurangadu 2, Dr.P.Manoj Kumar 3, Dr G. Naga Malleshwara Rao 4 Dept.of Mechanical

More information

FACULTY PROFILE. Date of Birth : No 9-A Block, Tamil Nadu Housing Board, Maharajapuram, Villupuram Educational Qualification:

FACULTY PROFILE. Date of Birth : No 9-A Block, Tamil Nadu Housing Board, Maharajapuram, Villupuram Educational Qualification: Phone No : 04146 224500. 9942005782 FACULTY PROFILE Dr.V.Gnanamoorthi Assistant Pressor & HOD i/c Mechanical College engineering Kakuppam -605103 Email ID : cvgnana@gmail.com cvgnana@aucev.edu.in Date

More information

Investigation of Effect of Intake Air Preheating By Heat Wheel on Performance and Emission Characteristics of Diesel Engine

Investigation of Effect of Intake Air Preheating By Heat Wheel on Performance and Emission Characteristics of Diesel Engine Investigation of Effect of Intake Air Preheating By Heat Wheel on Performance and Emission Characteristics of Diesel Engine Pradip G. Karale 1, Dr. J.A. Hole 2 1 PG Student Mechanical Engineering Dept.

More information

K.L.N. COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING Course Outcomes, PO & PSO Mapping Regulation 2013

K.L.N. COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING Course Outcomes, PO & PSO Mapping Regulation 2013 S.NO K.L.N. COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING Course Outcomes, PO & PSO Mapping Regulation 2013 SEMESTER ANNA UNIVERSITY, CHENNAI - AFFILIATED INSTITUTIONS R 2013

More information

IJSER. Sivanesh Prabhu.M, Arulvel.S,Mayakkannan.S. 1. Introduction 2. THEORETICAL CALCULATION

IJSER. Sivanesh Prabhu.M, Arulvel.S,Mayakkannan.S. 1. Introduction 2. THEORETICAL CALCULATION International Journal of Scientific & Engineering Research Volume 8, Issue 8, August-017 1431 ISSN 9-5518 CFD Analysis of Automobile Rear Dynamic Spoiler 1. Introduction Sivanesh Prabhu.M, Arulvel.S,Mayakkannan.S

More information

Foundations of Thermodynamics and Chemistry. 1 Introduction Preface Model-Building Simulation... 5 References...

Foundations of Thermodynamics and Chemistry. 1 Introduction Preface Model-Building Simulation... 5 References... Contents Part I Foundations of Thermodynamics and Chemistry 1 Introduction... 3 1.1 Preface.... 3 1.2 Model-Building... 3 1.3 Simulation... 5 References..... 8 2 Reciprocating Engines... 9 2.1 Energy Conversion...

More information

Experimental Investigation of Pedal Driven Hacksaw

Experimental Investigation of Pedal Driven Hacksaw Research Inventy: International Journal of Engineering And Science Vol.4, Issue 7 (July 2014), PP 01-05 Issn (e): 2278-4721, Issn (p):2319-6483, www.researchinventy.com Experimental Investigation of Pedal

More information

International Journal of Engineering Research-Online A Peer Reviewed International Journal Articles available online

International Journal of Engineering Research-Online A Peer Reviewed International Journal Articles available online RESEARCH ARTICLE ISSN: 2321-7758 ANALYSIS OF HEAT TRANSFER RATE BY VARYING COOLING FLUID FOR ENGINE CYLINDER FINS BALUSANI ARUN KUMAR 1, V.NARASIMHA REDDY 2 1 M.Tech Scholar, 2 Asst.Professor Department

More information

Faculty Profile & Publications FACULTY MEMBERS

Faculty Profile & Publications FACULTY MEMBERS Faculty Profile & Publications FACULTY MEMBERS Dr Ambarish Datta Qualification Ph.D. in Engineering from IIEST, Shibpur, 2017. M.E. (Automobile) from Jadavpur University, 2010. B.Tech. (Automobile) from

More information

Investigation of Fuel Flow Velocity on CNG Engine using New Injector

Investigation of Fuel Flow Velocity on CNG Engine using New Injector Investigation of Fuel Flow Velocity on CNG Engine using New Injector Hari Prastowo 1, Semin 1*, M. Badrus Zaman 1, Amiadji 1, T. Bambang Musrijadi 1, Agoes Santoso 1, Dwi Priyanta 1, Sardono Sarwito 1,

More information

COMPARISON OF ANALYTICAL & FEA OF CONTACT ANALYSIS OF SPUR GEAR DRIVE

COMPARISON OF ANALYTICAL & FEA OF CONTACT ANALYSIS OF SPUR GEAR DRIVE COMPARISON OF ANALYTICAL & FEA OF CONTACT ANALYSIS OF SPUR GEAR DRIVE Sachin Almelkar 1, Prof I.G.Bhavi 2 1M.Tech (Machine Design). B L D E A s Dr.P.G. Halakatti College Of Engineering and Technology,Vijayapur,

More information

EFFECT OF INJECTING HYDROGEN PEROXIDE INTO DIESEL ENGINE

EFFECT OF INJECTING HYDROGEN PEROXIDE INTO DIESEL ENGINE EFFECT OF INJECTING HYDROGEN PEROXIDE INTO DIESEL ENGINE Nagaprasad K. S. 1, D. Madhu 2 1 Senior Lecturer, Department of Mechanical Engineering K. S. Institute of Technology, Bangalore, India. nagaprasad_k_s@yahoo.com

More information

Optimization of Neem and Niger Oil Blends and IOP Used for Diesel Engine Using Taguchi Method

Optimization of Neem and Niger Oil Blends and IOP Used for Diesel Engine Using Taguchi Method ISSN : 25-915 Vol-3, Issue-, July 217 Optimization of Neem and Niger Oil Blends and Used for Diesel Engine Using Taguchi Method 1 Mr. Kadam S. S., 2 Mr. Burkul R.M, 3 Mr. Andhale Y. S. 1 M.E. Heat Power,

More information

Research Priorities Workshop

Research Priorities Workshop Research Priorities Workshop HSL, Buxton, UK, 18 September 2018 Pre-normative REsearch for Safe use of Liquid HYdrogen 1 PRESLHY Research Priorities Workshop, 18 September 2018, Buxton UK Objectives o

More information

Section details: Direct assessment details: Automatic Transmission and its. applications, hydro static drive and Electric drive

Section details: Direct assessment details: Automatic Transmission and its. applications, hydro static drive and Electric drive Section AUTO-A Faculty of Engineering & Technology, SRM University, Kattankulathur 603203 School of Mechanical Engineering Department of Automobile Engineering Course plan Date : 29 Dec. 2011 Course code

More information

CONTROL OF POLLUTANTS WITH CATALYTIC CONVERTER AND COPPER COATED CYLINDER HEAD IN METHANOL- GASOLINE BLEND OPERATED TWO STROKE SI ENGINE

CONTROL OF POLLUTANTS WITH CATALYTIC CONVERTER AND COPPER COATED CYLINDER HEAD IN METHANOL- GASOLINE BLEND OPERATED TWO STROKE SI ENGINE International Journal of Mechanical Engineering and Technology (IJMET) Volume 6, Issue 6, June 2015, pp. 132-138, Article ID: IJMET_06_06_013 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=6&itype=6

More information

CURRICULUM VITAE (RESUME)

CURRICULUM VITAE (RESUME) CURRICULUM VITAE (RESUME) 1. PERSONAL DETAIL Dr. Badrul Hasan Khan Senior member IEEE Professor Department of Electrical Engineering Aligarh Muslim University, Aligarh- 202 002 (UP), India Phone:+9412562737,

More information

ELEC 585/462 MOTOR DRIVE DYNAMICS COURSE OUTLINE & ASSESSMENT TECHNIQUES SEPT- DEC / FALL 2013 CRN 11254/11246

ELEC 585/462 MOTOR DRIVE DYNAMICS COURSE OUTLINE & ASSESSMENT TECHNIQUES SEPT- DEC / FALL 2013 CRN 11254/11246 ELEC 585/462 MOTOR DRIVE DYNAMICS COURSE OUTLINE & ASSESSMENT TECHNIQUES SEPT- DEC / FALL 2013 CRN 11254/11246 Instructor: Office Hours: Dr. S. Nandi Days: Any time by appointment Phone: 721-8679 Location:

More information

Effects of ethanol unleaded gasoline blends on cyclic variability and emissions in an SI engine

Effects of ethanol unleaded gasoline blends on cyclic variability and emissions in an SI engine Applied Thermal Engineering 25 (2005) 917 925 www.elsevier.com/locate/apthermeng Effects of ethanol unleaded gasoline blends on cyclic variability and emissions in an SI engine M.A. Ceviz *,F.Yüksel Department

More information

Dr. PUJA DASH, MIEEE, LMISTE ASSOCIATE PROFESSOR

Dr. PUJA DASH, MIEEE, LMISTE ASSOCIATE PROFESSOR Dr. PUJA DASH, MIEEE, LMISTE ASSOCIATE PROFESSOR DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING GAYATRI VIDYA PARISHAD COLLEGE OF ENGINEERING (Autonomous) Madhurwada, Visakhapatnam, Pin-530048, Andhra

More information

EXPERIMENTAL INVESTIGATION ON PERFORMANCE CHARACTERISTICS OF FOUR STROKE SINGLE CYLINDER PETROL ENGINE USING A PRE-HEATING SET-UP AND FUEL BLENDS

EXPERIMENTAL INVESTIGATION ON PERFORMANCE CHARACTERISTICS OF FOUR STROKE SINGLE CYLINDER PETROL ENGINE USING A PRE-HEATING SET-UP AND FUEL BLENDS Int. J. Chem. Sci.: 14(4), 2016, 2198-2210 ISSN 0972-768X www.sadgurupublications.com EXPERIMENTAL INVESTIGATION ON PERFORMANCE CHARACTERISTICS OF FOUR STROKE SINGLE CYLINDER PETROL ENGINE USING A PRE-HEATING

More information

VOLTAGE STABILITY IMPROVEMENT IN POWER SYSTEM BY USING STATCOM

VOLTAGE STABILITY IMPROVEMENT IN POWER SYSTEM BY USING STATCOM VOLTAGE STABILITY IMPROVEMENT IN POWER SYSTEM BY USING A.ANBARASAN* Assistant Professor, Department of Electrical and Electronics Engineering, Erode Sengunthar Engineering College, Erode, Tamil Nadu, India

More information

National Conference on Latest Trends in Design & Testing of Transmission Line Components

National Conference on Latest Trends in Design & Testing of Transmission Line Components Book-Post National Conference on Latest Trends in Design & Testing of Transmission Line Components 22-23 November 2010 To, Mr. M. Selvaraj Engineering Officer / Co-ordinator Mechanical Engineering Division

More information

Comparison of Swirl, Turbulence Generating Devices in Compression ignition Engine

Comparison of Swirl, Turbulence Generating Devices in Compression ignition Engine Available online atwww.scholarsresearchlibrary.com Archives of Applied Science Research, 2016, 8 (7):31-40 (http://scholarsresearchlibrary.com/archive.html) ISSN 0975-508X CODEN (USA) AASRC9 Comparison

More information

ME2301 THERMAL ENGINEERING L T P C OBJECTIVE:

ME2301 THERMAL ENGINEERING L T P C OBJECTIVE: ME2301 THERMAL ENGINEERING L T P C 3 1 0 4 OBJECTIVE: To integrate the concepts, laws and methodologies from the first course in thermo dynamics into analysis of cyclic processes To apply the thermodynamic

More information

TECHNICAL PAPER FOR STUDENTS AND YOUNG ENGINEERS - FISITA WORLD AUTOMOTIVE CONGRESS, BARCELONA

TECHNICAL PAPER FOR STUDENTS AND YOUNG ENGINEERS - FISITA WORLD AUTOMOTIVE CONGRESS, BARCELONA TECHNICAL PAPER FOR STUDENTS AND YOUNG ENGINEERS - FISITA WORLD AUTOMOTIVE CONGRESS, BARCELONA 2 - TITLE: Topic: INVESTIGATION OF THE EFFECTS OF HYDROGEN ADDITION ON PERFORMANCE AND EXHAUST EMISSIONS OF

More information

EXPERIMENTAL INVETIGATIONN ON PERFORMANCE AND EMISSION CHARACTERISTICS OF DI- CI ENGINE FUELED WITH PREHEATED SHEA OLEIN BIODIESEL

EXPERIMENTAL INVETIGATIONN ON PERFORMANCE AND EMISSION CHARACTERISTICS OF DI- CI ENGINE FUELED WITH PREHEATED SHEA OLEIN BIODIESEL International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 11, November 2018, pp. 2006 2014, Article ID: IJMET_09_11 211 Available online at http://www.ia aeme.com/ijmet/issues.asp?jtype=ijmet&vtype=

More information

Numerical Investigation of the Effect of Excess Air and Thermal Power Variation in a Liquid Fuelled Boiler

Numerical Investigation of the Effect of Excess Air and Thermal Power Variation in a Liquid Fuelled Boiler Proceedings of the World Congress on Momentum, Heat and Mass Transfer (MHMT 16) Prague, Czech Republic April 4 5, 2016 Paper No. CSP 105 DOI: 10.11159/csp16.105 Numerical Investigation of the Effect of

More information

International Journal of Scientific & Engineering Research, Volume 7, Issue 8, August-2016 ISSN

International Journal of Scientific & Engineering Research, Volume 7, Issue 8, August-2016 ISSN ISSN 2229-5518 2417 Experimental Investigation of a Two Stroke SI Engine Operated with LPG Induction, Gasoline Manifold Injection and Carburetion V. Gopalakrishnan and M.Loganathan Abstract In this experimental

More information

Investigation on the Performance and Emissions of Aloevera Blends with EGR System

Investigation on the Performance and Emissions of Aloevera Blends with EGR System ISSN: 2319-8753 Investigation on the Performance and Emissions of Aloevera Blends with EGR System P. Vindhya 1, Dr.S.Sunil Kumar Reddy 2, V.Govind Naik 3 P.G. Student, Department of Mechanical Engineering,

More information

Manufacturing Process I 10ME35 (Fundamentals of Foundry and Mechanical Computer Aided Machine 10ME36A/

Manufacturing Process I 10ME35 (Fundamentals of Foundry and Mechanical Computer Aided Machine 10ME36A/ III SEMESTER Teaching /week Sub-Code Title Dept. Pract. Duration I.A. / Total /Drg. 1 10MAT31 Engineering Mathematics - III Mathematics 04-03 25 100 125 2 Material Sc. & Metallurgy / 10ME32A/ Mechanical

More information

Evaluation of Temperature for an Electronic Enclosure

Evaluation of Temperature for an Electronic Enclosure Evaluation of Temperature for an Electronic Enclosure [1] Ajay Kumar [2] Mrs. Manjula S [1] M.Tech Student, [2] Assistant Professor Computational analysis in Mechanical Science Department Government Engineering

More information

Experimental Investigation of Performance and Emissions of a Stratified Charge CNG Direct Injection Engine with Turbocharger

Experimental Investigation of Performance and Emissions of a Stratified Charge CNG Direct Injection Engine with Turbocharger MATEC Web of Conferences 1, 7 (17 ) DOI:1.11/matecconf/1717 ICTTE 17 Experimental Investigation of Performance and Emissions of a Stratified Charge CNG Direct Injection Engine with charger Hilmi Amiruddin

More information

Redesign of exhaust protection cover for high air flow levelling valve

Redesign of exhaust protection cover for high air flow levelling valve IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 11, Issue 2 Ver. II (Mar- Apr. 2014), PP 90-96 Redesign of exhaust protection cover for high air

More information

Optimization of Seat Displacement and Settling Time of Quarter Car Model Vehicle Dynamic System Subjected to Speed Bump

Optimization of Seat Displacement and Settling Time of Quarter Car Model Vehicle Dynamic System Subjected to Speed Bump Research Article International Journal of Current Engineering and Technology E-ISSN 2277 4106, P-ISSN 2347-5161 2014 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet Optimization

More information

Sohel Anwar Assistant Professor of Mechanical Engineering Indiana University Purdue University Indianapolis

Sohel Anwar Assistant Professor of Mechanical Engineering Indiana University Purdue University Indianapolis Sohel Anwar Assistant Professor of Mechanical Engineering Indiana University Purdue University Indianapolis Education 1994, Ph.D., Mechanical Engineering, The University of Arizona, Tucson, Arizona. 1990,

More information

NCAA Division I Championship Subdivision Football Recruiting Calendar August 1, 2017, through July 31, 2018

NCAA Division I Championship Subdivision Football Recruiting Calendar August 1, 2017, through July 31, 2018 NCAA Division I Championship Subdivision Football August 1, 2017, through July 31, 2018 (See NCAA Division I Bylaw 13.17.4.2 for Football Calendar Formula) (a) August 1-31, 2017: Dead Period (b) September

More information

Induction Motor Condition Monitoring Using Fuzzy Logic

Induction Motor Condition Monitoring Using Fuzzy Logic Advance in Electronic and Electric Engineering. ISSN 2231-1297, Volume 3, Number 6 (2013), pp. 755-764 Research India Publications http://www.ripublication.com/aeee.htm Induction Motor Condition Monitoring

More information

POLLUTION CONTROL IN GASOLINE ENGINE USING METAL CATALYTIC CONVERTER

POLLUTION CONTROL IN GASOLINE ENGINE USING METAL CATALYTIC CONVERTER Volume 119 No. 7 2018, 1235-1242 ISSN: 1311-8080 (printed version); ISSN: 1314-3395 (on-line version) url: http://www.ijpam.eu ijpam.eu POLLUTION CONTROL IN GASOLINE ENGINE USING METAL CATALYTIC CONVERTER

More information

Analysis of Emission characteristics on Compression Ignition Engine using Dual Fuel Mode for Variable Speed

Analysis of Emission characteristics on Compression Ignition Engine using Dual Fuel Mode for Variable Speed International Journal of Engineering Research and Development e-issn: 2278-067X, p-issn: 2278-800X, www.ijerd.com Volume 4, Issue 3 (October 2012), PP. 23-27 Analysis of Emission characteristics on Compression

More information

Marco W Migliaro - Publications

Marco W Migliaro - Publications # Author and developer, CD ROM, "STATIONARY BATTERIES: A Pictorial Reference for Maintenance and Testing," The Battery Connector, Inc., ISBN 0-9655596-0-2, 1996. # Author, Section 18, "Batteries," Handbook

More information

PERFORMANCE EVALUATION OF A FOUR STROKE COMPRESSION IGNITION ENGINE WITH VARIOUS HELICAL THREADED INTAKE MANIFOLDS

PERFORMANCE EVALUATION OF A FOUR STROKE COMPRESSION IGNITION ENGINE WITH VARIOUS HELICAL THREADED INTAKE MANIFOLDS PERFORMANCE EVALUATION OF A FOUR STROKE COMPRESSION IGNITION ENGINE WITH VARIOUS HELICAL THREADED INTAKE MANIFOLDS V.CVS PHANEENDRA, V.PANDURANGADU & M. CHANDRAMOULI Mechanical Engineering, JNTUCEA, Anantapur,

More information

THE THEORETICAL STUDY ON INFLUENCE OF FUEL INJECTION PRESSURE ON COMBUSTION PARAMETERS OF THE MARINE 4-STROKE ENGINE

THE THEORETICAL STUDY ON INFLUENCE OF FUEL INJECTION PRESSURE ON COMBUSTION PARAMETERS OF THE MARINE 4-STROKE ENGINE Journal of KONES Powertrain and Transport, Vol. 23, No. 1 2016 THE THEORETICAL STUDY ON INFLUENCE OF FUEL INJECTION PRESSURE ON COMBUSTION PARAMETERS OF THE MARINE 4-STROKE ENGINE Jerzy Kowalski Gdynia

More information

TRANSIENT PERFORMANCE OF THREE PHASE INDUCTION MACHINE USING SYNCHRONOUSLY ROTATING REFERENCE FRAME

TRANSIENT PERFORMANCE OF THREE PHASE INDUCTION MACHINE USING SYNCHRONOUSLY ROTATING REFERENCE FRAME Available online at www.internationalejournals.com International ejournals International ejournal of Mathematics and Engineering 139 (211) 126-1266 ISSN 976 1411 TRANSIENT PERFORMANCE OF THREE PHASE INDUCTION

More information

Study of intake manifold for Universiti Malaysia Perlis automotive racing team formula student race car

Study of intake manifold for Universiti Malaysia Perlis automotive racing team formula student race car Journal of Physics: Conference Series PAPER OPEN ACCESS Study of intake manifold for Universiti Malaysia Perlis automotive racing team formula student race car To cite this article: A Norizan et al 2017

More information

Economics and Management of Convention and Exhibition

Economics and Management of Convention and Exhibition Holiday Optional Week Career Week Degree Design Project International Cooperation Programs Other Practice Degree Practice Manufacturing Practice Social Practice General Experi Practice of Electronic Engineering

More information

Received 13 October 2010; revised 23 January 2011; accepted 28 January 2011

Received 13 October 2010; revised 23 January 2011; accepted 28 January 2011 2 Journal of Scientific & Industrial Research J SCI IND RES VOL 7 MARCH 11 Vol. 7, March 11, pp. 2-224 Effects of advanced injection timing on performance and emission of a supercharged dual-fuel diesel

More information

Academic Course Description

Academic Course Description BME 503 FLUID POWER SYSTEMS Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Mechanical Engineering BME 503 FLUID POWER SYSTEMS Fifth Semester, 2015-16

More information

Government Engineering College, Bhuj.

Government Engineering College, Bhuj. Suthar et al., International Journal of Advanced Engineering Technology E-ISSN 0976-3945 Research Paper EFFECT OF FUEL ADDITIVE ON PERFORMANCE AND EMISSION FOR DIESEL ENGINE FUELLED WITH BLEND OF NEEM

More information

Modal analysis of Truck Chassis Frame IJSER

Modal analysis of Truck Chassis Frame IJSER Modal analysis of Truck Chassis Frame 158 Shubham Bhise 1, Vaibhav Dabhade 1, Sujit Pagi 1, Apurvi Veldandi 1. 1 B.E. Student, Dept. of Automobile Engineering, Saraswati College of Engineering, Navi Mumbai,

More information

Performance Test of IC Engine Using Blends of Ethanol and Kerosene with Diesel

Performance Test of IC Engine Using Blends of Ethanol and Kerosene with Diesel Performance Test of IC Engine Using Blends of Ethanol and Kerosene with Diesel Er. Milind S Patil 1, Dr. R. S. Jahagirdar 2, Er. Eknath R Deore 3, 1. Sr. Lecturer in Mechanical Engineering 2. Principal

More information

Performance Enhancement & Emission Reduction of Single Cylinder S.I. Engine using Tri Fuels -An Experimental Investigation

Performance Enhancement & Emission Reduction of Single Cylinder S.I. Engine using Tri Fuels -An Experimental Investigation IJSTE - International Journal of Science Technology & Engineering Volume 1 Issue 11 May 2015 ISSN (online): 2349-784X Performance Enhancement & Emission Reduction of Single Cylinder S.I. Engine using Tri

More information

CCCCO Worksheet CARNEGIE UNITS - SEMESTER. Lecture Lab Lecture

CCCCO Worksheet CARNEGIE UNITS - SEMESTER. Lecture Lab Lecture CARNEGIE UNITS - SEMESTER Lecture Lab Lecture Lab 17.5 hours = 1 unit 52.5 hours = 1 unit 18 hours = 1 unit 54 hours = 1 unit 8.8 0.5 26.3 0.50 9 0.5 27 0.5 17.5 1.0 52.5 1.00 18 1.0 54 1.0 26.3 1.5 78.8

More information

Effects of Dilution Flow Balance and Double-wall Liner on NOx Emission in Aircraft Gas Turbine Engine Combustors

Effects of Dilution Flow Balance and Double-wall Liner on NOx Emission in Aircraft Gas Turbine Engine Combustors Effects of Dilution Flow Balance and Double-wall Liner on NOx Emission in Aircraft Gas Turbine Engine Combustors 9 HIDEKI MORIAI *1 Environmental regulations on aircraft, including NOx emissions, have

More information