The Graduate Diploma in Engineering is an AQF Level 8 qualification with a standard full-time duration of 1 year.
|
|
|
- Charlene Skinner
- 5 years ago
- Views:
Transcription
1 Graduate Diploma in Engineering (GDipE) 2015 These Program Rules should be read in conjunction with the University's policies ( Overview Graduate Diploma in Engineering (Aerospace) (GDipE(Aero)) Graduate Diploma in Engineering (Chemical) (GDipE(Chem)) Graduate Diploma in Engineering (Civil and Environmental) (GDipE(CivEnv)) Graduate Diploma in Engineering (Civil and Structural) (GDipE(CivStruct)) Graduate Diploma in Engineering (Electrical) (GDipE(Elec)) Graduate Diploma in Engineering (Electronic) (GDipE(Elec)) Graduate Diploma in Engineering (Mechanical) (GDipE(Mech)) Graduate Diploma in Engineering (Mechatronic) (GDipE(Mecht)) Graduate Diploma in Engineering (Mining) (GDipE(Mining)) The Graduate Diploma in Engineering is an AQF Level 8 qualification with a standard full-time duration of 1 year. 1. Academic Program Rules for Graduate Diploma in Engineering There shall be a Graduate Diploma in Engineering. 2. Qualification Requirements 2.1 Academic Program To qualify for the Graduate Diploma in Engineering, the student must complete satisfactorily a program of study consisting of the following requirements with a combined total of not less than 24 units in one of the following Disciplines: Aerospace Chemical Civil and Environmental Civil and Structural Electrical Electronic Mechanical Mechatronic Mining Page 1 of 8
2 2.1.1 Core Courses ELEC ENG 7057 Engineering Communication & Critical Thinking (3 units) plus Courses to the value of 6 units from the following: TECHCOMM 5021 Applied Project Management 1 (3 units) STATS 7053 Statistics in Engineering (3 units) and either APP MTH 7054 Modelling & Simulation of Stochastic Systems (3 units) or COMP SCI 7077 Solving Engineering Models (3 units) Foundation courses Foundation courses to the value of 12 units in one specialisation from the following: Aerospace MECH ENG 7073 Space Vehicle Design (3 units) MECH ENG 7068 Applied Aerodynamics (3 units) MECH ENG 7066 Aeronautical Engineering (3 units) MECH ENG 7067 Aerospace Materials & Structures (3 units) Chemical CHEM ENG 7050 Multi-Phase Fluid & Particle Mechanics (3 units) CHEM ENG 7051 Kinetics & Reactor Design (3 units) CHEM ENG 7052 Separation Processes (3 units) CHEM ENG 7057 Research Practice (3 units) Civil & Environmental C&ENVENG 7079 Water Engineering & Design (3 units) C&ENVENG 7086 Engineering Management (3 units) C&ENVENG 7029 Environmental Modelling & Management (3 units) C&ENVENG 7077 Engineering Hydrology (3 units) Civil & Structural C&ENVENG 7058 Structural Mechanics (3 units) Page 2 of 8
3 C&ENVENG 7007 Structural Design (Steel) (3 units) C&ENVENG 7005 Structural Design (Concrete) (3 units) C&ENVENG 7069 Geotechnical Engineering (3 units) Electrical ELEC ENG 7082 Principles of Control Systems (3 units) ELEC ENG 7049 Power Electronic Systems (3 units) ELEC ENG 7069 Electric Energy Systems (3 units) ELEC ENG 7074 Power Systems (3 units) Electronic ELEC ENG 7033 Principles of RF Engineering (3 units) ELEC ENG 7082 Principles of Control Systems (3 units) ELEC ENG 7080 Principles of Communication Systems (3 units) ELEC ENG 7079 Principles of Signal Processing (3 units) Mechanical MECH ENG 7047 Dynamics & Control II (3 units) MECH ENG 7068 Applied Aerodynamics (3 units) MECH ENG 7070 Heat Transfer & Thermodynamics (3 units) MECH ENG 7074 Structural Design & Solid Mechanics (3 units) Mechatronic MECH ENG 7047 Dynamics & Control II (3 units) MECH ENG 7070 Heat Transfer & Thermodynamics (3 units) MECH ENG 7071 Mechatronics II (3 units) MECH ENG 7072 Microcontroller Programming (3 units) Mining MINING 7071 Mining Systems (3 units) MINING 7070 Resource Estimation (3 units) MINING 7073 Mine Planning (3 units) MINING 7072 Mining Geomechanics (3 units) Electives Page 3 of 8
4 Courses to the value of 3 units from the same specialisation as the foundation courses from the following: Aerospace CHEM ENG 7047 Composites & Multiphase Polymers (3 units) ELEC ENG 7017 Beamforming & Array Processing (3 units) MECH ENG 7023 Fracture Mechanics (3 units) MECH ENG 7025 Topics in Welded Structures (3 units) MECH ENG 7026 Advanced Topics in Fluid Mechanics (3 units) MECH ENG 7028 Advanced PID Control (3 units) MECH ENG 7030 Advanced Vibrations (3 units) MECH ENG 7034 Advanced Digital Control (3 units) MECH ENG 7043 Stresses in Plates & Shells (3 units) MECH ENG 7045 CFD for Engineering Applications (3 units) MECH ENG 7053 Aerospace Propulsion (3 units) MECH ENG 7059 Finite Element Analysis of Structures (3 units) MECH ENG 7061 Corrosion Principles & Prevention (3 units) MECH ENG 7062 Aircraft Design (3 units) MECH ENG 7063 Advanced Topics in Aerospace Engineering (3 units) MECH ENG 7075 Sustainable Thermal Technologies (3 units) MECH ENG 7076 Renewable Fluid Power Technology (3 units) Chemical CHEM ENG 7048 Bio-fuels, Biomass & Wastes (3 units) CHEM ENG 7035 Water & Waste Water Treatment (3 units) CHEM ENG 7038 Process Plant Safety & Risk Assessment (3 units) CHEM ENG 7039 Pinch Analysis & Process Synthesis (3 units) CHEM ENG 7054 Simulation & Concept Design (3 units) CHEM ENG 7056 Process Control & Instrumentation (3 units) CHEM ENG 7027 Transport Processes in the Environment (3 units) CHEM ENG 7055 Material Science & Engineering (3 units) Page 4 of 8
5 Civil and Environmental C&ENVENG 7037 Water Distribution Systems & Design (3 units) C&ENVENG 7108 Environmental Engineering & Design IVA (3 units) C&ENVENG 7109 Environmental Engineering & Design IVB (3 units) C&ENVENG 7042 Advanced Reinforced Concrete (3 units) C&ENVENG 7044 Introduction to Environmental Law (3 units) C&ENVENG 7110 Environmental Engineering & Design IVC (3 units) C&ENVENG 7114 Hydrological Modelling & Water Resources Management (3 units) C&ENVENG 7115 Flood Estimation & Modelling (3 units) TECHCOMM 7033 Carbon Management in Business (3 units) TECHCOMM 7025 Introduction to Climate Change in Business (3 units) TECHCOMM 5004 Managing Project and Systemic Risk (3 units) TECHCOMM 7012 Business & Contract Legal Studies (3 units) Civil and Structural C&ENVENG 7061 Computer Methods of Structural Analysis (3 units) C&ENVENG 7059 Structural Response to Blast Loading (3 units) C&ENVENG 7107 Prestressed Concrete Structures (3 units) C&ENVENG 7108 Environmental Engineering & Design IVA (3 units) C&ENVENG 7033 Seismic Design of Masonry Buildings (3 units) C&ENVENG 7112 Advanced Civil Geotechnical Engineering (3 units) MECH ENG 7023 Fracture Mechanics (3 units) MECH ENG 7059 Finite Element Analysis of Structures (3 units) MECH ENG 7061 Corrosion Principles & Prevention (3 units) TECHCOMM 5026 Enterprise Transformations (3 units) TECHCOMM 5004 Managing Project & Systemic Risk (3 units) TECHCOMM 7012 Business & Contract Legal Studies (3 units) MECH ENG 7043 Stresses in Plates & Shells (3 units) Electrical ELEC ENG 7075 Distributed Generation Technologies (3 units) ELEC ENG 7046 Power Quality & Fault Diagnostics (3 units) Page 5 of 8
6 ELEC ENG 7066 Power System Dynamics (3 units) ELEC ENG 7079 Principles of Signal Processing (3 units) ELEC ENG 7068 Power Systems Monitoring & Protection (3 units) MECH ENG 7034 Advanced Digital Control (3 units) TECHCOMM 5013 Systems Engineering 1 (3 units) TECHCOMM 5014 Project Management Controls (3 units) TECHCOMM 7029 Systems Engineering 2 (3 units) Electronic ELEC ENG 7049 Power Electronic Systems (3 units) ELEC ENG 7051 Microelectronic Systems (3 units) ELEC ENG 7060 Image Sensors & Processing (3 units) ELEC ENG 7015 Adaptive Signal Processing (3 units) ELEC ENG 7081 Telecommunications Systems (3 units) ELEC ENG 7084 Avionic Sensors & Systems PG. (3 units) ELEC ENG 7002 Kalman Filtering & Tracking.. (3 units) Mechanical CHEM ENG 7047 Composites & Multiphase Polymers (3 units) MECH ENG 7020 Materials Selection & Failure Analysis (3 units) MECH ENG 7021 Combustion Technology & Emission Control (3 units) MECH ENG 7023 Fracture Mechanics (3 units) MECH ENG 7024 Robotics M (3 units) MECH ENG 7025 Topics in Welded Structures (3 units) MECH ENG 7026 Advanced Topics in Fluid Mechanics (3 units) MECH ENG 7027 Engineering Acoustics (3 units) MECH ENG 7029 Airconditioning (3 units) MECH ENG 7030 Advanced Vibrations (3 units) MECH ENG 7043 Stresses in Plates & Shells (3 units) MECH ENG 7044 Biomechanical Engineering (3 units) MECH ENG 7045 CFD for Engineering Applications (3 units) Page 6 of 8
7 MECH ENG 7059 Finite Element Analysis of Structures (3 units) MECH ENG 7061 Corrosion Principles & Prevention (3 units) MECH ENG 7075 Sustainable Thermal Technologies (3 units) MECH ENG 7076 Renewable Fluid Power Technology (3 units) Mechatronic ELEC ENG 7015 Adaptive Signal Processing (3 units) ELEC ENG 7060 Image Sensors and & Processing (3 units) ELEC ENG 7065 Sonar Sensors and & Systems (3 units) MECH ENG 7024 Robotics M (3 units) MECH ENG 7027 Engineering Acoustics (3 units) MECH ENG 7028 Advanced PID Control (3 units) MECH ENG 7030 Advanced Vibrations (3 units) MECH ENG 7034 Advanced Digital Control (3 units) MECH ENG 7044 Biomechanical Engineering (3 units) MECH ENG 7075 Sustainable Thermal Technologies (3 units) MECH ENG 7076 Renewable Fluid Power Technology (3 units) Mining MINING 7107 Surface Mining Systems (3 units) MINING 7114 Simulation & Animation for Mining Engineering (3 units) MINING 7101 Mine Management (3 units) MINING 7102 Mine Geotechnical Engineering (3 units) MINING 7106 Hard Rock Mine Design & Feasibility (3 units) MINING 7063 Mining in a Global Environment (3 units) MINING 7112 Advanced Mine Geotechnical Engineering (3 units) APP MTH 7105 Optimisation & Operations Research (3 units) C&ENVENG 7043 Introduction to Geostatistics (3 units) C&ENVENG 7053 Non-Linear Geostatistics (3 units) C&ENVENG 7056 Linear Geostatistics (3 units) MECHENG 7059 Finite Element Analysis of Structures (3 units) TECHCOMM 5004 Managing Project & Systemic Risk (3 units) Page 7 of 8
8 TECHCOMM 7033 Carbon Management in Business (3 units) TECHCOMM 7032 Mine Financing & Valuation (3 units) Repeating Courses A student who has failed a course twice may not enrol in that course again except by special permission of the Faculty and then only under such conditions as the Faculty may prescribe. For all current Academic Programs Rules, visit: The University of Adelaide Calendar website For information about Programs and Courses, contact Ask Adelaide: Telephone: Freecall: Online enquiries: adelaide.edu.au/student/enquiries CRICOS Provider Number 00123M The University of Adelaide 2015 Please direct student enquiries to Ask Adelaide The University of Adelaide South Australia 5005 Australia Contact T F Page 8 of 8
(Common to ME/IP/IM/AU/MA/AE)
Sl. III SEMESTER Sub- 1 10MAT31 Engineering Mathematics - III 2 Material Sc. & Metallurgy / 10ME32A/ 10ME32B Metrology 3 Basic 10ME33 Thermodynamics 4 Mechanics of 10ME34 Materials 5 Process I 10ME35 (Fundamentals
GUJARAT TECHNOLOGICAL UNIVERSITY
GUJARAT TECHNOLOGICAL UNIVERSITY Draft Teaching Scheme : B.E. Course : (W.E.F.: 2016-2017) Aeronautical Engineering (01) Theory Marks utorial/ Practical Mark Total Branch Aircraft Design II 4 0 2 6 70
Engineering Modules generally available for CATS student Academic Year 2015/16
Course: BEng Honours in Aerospace, Aerospace Systems, Computer Aided, Mechanical, Manufacturing and Automotive Engineering 4AAD0028 Career Skills Development AB 0-100 4PAM1007 Engineering Mathematics A
Friday Midterm EXAMINATION Fall 2018 CREDIT HOURS ENGINEERING PROGRAMS AIN SHAMS UNIVERSITY FACULTY OF ENGINEERING
HUM311 Engineering Management 176 HUMN362 Engineering Management 1 14:00 16:00 224, 261 CEP 011 Engineering Drawing (2) 247 14:00 16:00 901, 901A, 902A, 902B,904, 250 Friday 9-11-2018 PHM022 Waves, Electricity,
SATHYABAMA INSTITUTE OF SCIENCE AND TECHNOLOGY (DEEMED TO BE UNIVERSITY)
SEMESTER: III BATCH: JAN 2017 Branch: ECE NAME OF THE 24.03.2018 FN SEC1302 Analog Integrated Circuits 24.03.2018 AN SEE1203 Control Systems 25.03.2018 FN SCS1202 Object oriented programming 25.03.2018
BEng Honours in Aerospace, Aerospace Systems, Computer Aided, Mechanical, Manufacturing and Automotive Engineering
BEng Honours in Aerospace, Aerospace Systems, Computer Aided, Mechanical, Manufacturing and Automotive Engineering Level 4 Career Skills Development 4ENT1096 0 English - - AB Engineering Mathematics 4PAM7
GUJARAT TECHNOLOGICAL UNIVERSITY BE 7th Semester Exam Scheme & Subject Code EVALUATION SCHEME
GUJARAT TECHNOLOGICAL UNIVERSITY BE 7th Semester Scheme & EVALUATION SCHEME MAX MIN MAX MIN MAX MIN MAX MIN 20 8 10 4 70 23 X 50% of X 30 12 X 50% of X NOTE : X = of the Particular. (M) 20/8 and 10/4 scheme
DEPARTMENT OF AUTOMOBILE ENGINEERING CURRICULUM. B. Tech. AUTOMOBILE ENGINEERING. In Specialization with MOTORSPORT ENGINEERING
DEPARTMENT OF AUTOMOBILE ENGINEERING CURRICULUM (Applicable for Students admitted from Academic Year 2015-16) B. Tech. AUTOMOBILE ENGINEERING In Specialization with MOTORSPORT ENGINEERING SCHOOL OF MECHANICAL
Al-FALAH UNIVERSITY (University with NAAC A Grade Accredited Institutions) Faridabad (Haryana) Tel. No. (0129) ,
Sr. No. Al-FALAH UNIVERSITY M. Tech Sem.-1 st (Re appear with CBCS Scheme/Old scheme) AFU, Dhauj, Faridabad. Date Course No Course Title Branches 1. 02.06.17 2. 06.06.17 3. 09.06.17 4. 13.06.17 MTCE 603
students (mostly MS level, partially BS and PhD) academic staff
The (established 1707) and the Mechanical Engineering Faculty of the CTU 8 faculties - Civil Eng, MechEng, ElEng, Informatics, NucEng, TranspEng, BioMedEng and Architecture/Styling 21 000 students (mostly
Aerospace Stream Selection: Streams A, B, C
24 March 2017 Aerospace Stream Selection: Streams A, B, C Daniel Feszty, PhD, PEng Associate Professor Carleton University Ottawa, ON Canadian Aerospace Important Facts and Figures Key early milestones
MECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL. (09 January 2016)
MECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL (09 January 2016) Sl. No. Table ME- 1 B.Tech. (Mechanical Engineering) - 2015 Batch onwards Code COURSE
Internal Marks Internal Marks Passing Marks ESE Marks ESE Passing Code Subject Credit Lect Lab Tut T P CE T P CE T P T P
Semester - 1 Internal Internal ESE ESE 03104102 Elements of Civil Engineering 4 3 2 0 20 20 20 8 10 8 60 30 24 15 150 03104103 Environmental Studies 2 2 0 0 20 0 20 8 0 8 60 0 24 0 100 03108101 Fundamentals
Early Childhood Care & Education Diploma in Early Childhood Care & Education Teaching [DCET1] Revised Curriculum from Oct 2015 Intake 8
![Early Childhood Care & Education Diploma in Early Childhood Care & Education Teaching [DCET1] Revised Curriculum from Oct 2015 Intake 8](/thumbs/79/78824220.jpg "Early Childhood Care & Education Diploma in Early Childhood Care & Education Teaching [DCET1] Revised Curriculum from Oct 2015 Intake 8")
Course Fees Payable for Part-time Diploma Courses (1H2018) Engineering Diploma in Engineering (Aerospace) [DEAS] 1 Diploma in Engineering (Building Services & Fire Safety) [DEBF] 2 Diploma in Engineering
GUJARAT TECHNOLOGICAL UNIVERSITY BE 8th Semester Exam Scheme & Subject Code EVALUATION SCHEME
GUJARAT TECHNOLOGICAL UNIVERSITY BE 8th Semester Scheme & EVALUATION SCHEME MAX MIN MAX MIN MAX MIN MAX MIN 20 8 10 4 70 23 X 50% of X 30 12 X 50% of X NOTE : X = of the Particular. (M) 20/8 and 10/4 scheme
Pearson Higher Nationals Recognition of Prior Learning (RPL)
earson Higher Nationals Recognition of rior Learning (RL) MAING DOCUMENT QCF earson BTEC Level 4 Higher National Certificate in Engineering unit content mapped to the Level 4 units available in the earson
SUBJECT CODES FOR VARIOUS COURSES UNDER JNTU KAKINADA
SUBJECT CODES FOR VARIOUS COURSES UNDER JNTU KAKINADA COURSE BRANCH REG YEAR SEM SUBJECT TITLE CODE CODE B.Tech 01 R10 1 1 R10111 ENGLISH PROFICIENCY B.Tech 01 R10 1 1 R10108 ENGINEERING PHYSICS AND ENGINEERING
Associate of Applied Science in Electro-Mechanical Engineering Technology To Bachelor of Science in Mechatronics Engineering Technology
Associate of Applied Science in Electro-Mechanical Engineering Technology To Bachelor of Science in Mechatronics Engineering Technology Completion of the following curriculum will satisfy the requirements
DIPLOMA IN MECHANICAL ENGINEERING (1020) Date and Day. Subject code
DIPLOMA IN MECHANICAL ENGINEERING (1020) code ( M-Scheme ) 32031 Strength of Materials 32032 Manufacturing Processes 32033 Machine Drawing I 1.11.2018 1 32041 Heat Power Engineering 32042 Special Machines
Automobile Engineering
xiii xiv Course Code DEPARTMENT OF AUTOMOBILE ENGINEERING Course title xv Prerequisites Co-requisites SEMESTER - I 15PD101 Soft Skills 15MA101 Calculus And Solid Geometry 15PY101 Physics 15PY101L Physics
ENERGY AND PRODUCTS APPLIED STUDIES FOR ENGINEERS. PRO2 Present and Future fuels Materials. PRO4 Gas, industrial combustion and environment
ENERGY AND PRODUCTS APPLIED STUDIES FOR ENGINEERS Program PRO1 Refining processes PRO2 Present and Future fuels Materials PRO3 Fuels - logistics PRO4 Gas, industrial combustion and environment PRO5 Lubrication
Manufacturing Process I 10ME35 (Fundamentals of Foundry and Mechanical Computer Aided Machine 10ME36A/
III SEMESTER Teaching /week Sub-Code Title Dept. Pract. Duration I.A. / Total /Drg. 1 10MAT31 Engineering Mathematics - III Mathematics 04-03 25 100 125 2 Material Sc. & Metallurgy / 10ME32A/ Mechanical
KCTCS AAS IN ENGINEERING AND ELECTRONICS TECHNOLOGY ROBOTICS AND AUTOMATION TRACK TO NKU BS IN MECHATRONICS ENGINEERING TECHNOLOGY CHECKLIST
Associate of Applied Science in Engineering and Electronics Technology Robotics and Automation Track To Bachelor of Science in Mechatronics Engineering Technology Completion of the following curriculum
Nandha Engineering College (Autonomous) Erode Examination -Sep 2016 Department Wise Time Table
M.E - Applied Electronics F.N: 09.30 AM to 12.30 PM A.N: 01.30 AM to 04.30 PM 11-11-2016 FN 15AEX07 Analog VLSI Design 14-11-2016 FN 15AEX02 Soft Computing 24-11-2016 FN 15VLX03 Low Power VLSI Design M.E
SEMESTER -- I (Common to all branches) (Group A) TOTAL
SEMESTER -- I (Common to all branches) (Group A) Sr. No. Course No. Subject L T P Evaluation Sess. End Total Credit Type TH1 AM-101 MATHEMATICS-I 310 30 70 100 4H TH2 HU-102 COMMUNICATION SKILLS 210 30
Tuition fees. Taught courses Important notes about fees
Tuition s Taught courses 2017-2018 Important notes about s The s outlined within this document apply to all students whose initial date of registration falls on or between 1 August 2017 and 31 July 2018.
Propeller Blade Bearings for Aircraft Open Rotor Engine
NTN TECHNICAL REVIEW No.84(2016) [ New Product ] Guillaume LEFORT* The Propeller Blade Bearings for Open Rotor Engine SAGE2 were developed by NTN-SNR in the frame of the Clean Sky aerospace programme.
Registration Information (SS18, F18 and W19)
Registration Information (SS18, F18 and W19) PENDING ADMIT STUDENTS: You will be able to enroll in Summer 2018 classes when your enrollment period opens. However, you will not be allowed to enroll in upper
Advance Your Company s Success in Technology Development & Commercialization PARTNER WITH ARGONNE NATIONAL LABORATORY
Advance Your Company s Success in Technology Development & Commercialization PARTNER WITH ARGONNE NATIONAL LABORATORY Leverage Argonne s expertise, technologies, and research facilities to improve your
B.S. in Agriculture Major: Agricultural Business Sample 4-Year Plan
Student Student ID # Student Phone # Advisor(s) Minimum GPA 2.00 Minor/Career Interest B.S. in Agriculture Major: Agricultural Business 2017-2018 Sample 4-Year Plan System Gen Ed Requirements (SGR's) Prerequisites/Comments
Graduate Two Year-At-A-Glance
Graduate 20-20 Two Year-At-A-Glance Name ES SU SP-1 ES SU ACC 7000 Accounting Theory Online - - - - OL - ACC 7100 Advanced Financial Accounting Reporting Online - - - - - OL ACC 7200 Advanced Income Taxation
ABE 5-Week Spring Schedule
ABE 5-Week Spring 2017-18 Schedule Spring 2017-18 A4 Schedule (Master dates: 1/08/18 2/10/18) Course # Course Name Dates Weeknight Classroom BUS 203 AA Principles of Marketing 1/08 2/10/18 R 111 BUS 310
EM - Electromobility and Electrical Aircraft Systems
Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2018 205 - ESEIAAT - Terrassa School of Industrial, Aerospace and Audiovisual Engineering 709 - EE - Department of Electrical Engineering
2018 ANSYS, Inc. ANSYS.COM
Dramatic innovations in electrical systems are underway to increase the energy efficiency of the millions of industrial motors that power fans, pumps and compressors used around the globe. The targeted
ACADEMIC TIME TABLE Session 2017/18 ( 15 Batch)
Group / Field : Bio-Medical Engineering [16] EN3023 Electronic Design Realization (L) [ASSH] EN3143 Electronic Control Systems (L) [ENTC1] EN3030 Circuits and Systems Design (L) [ ENTC1] CS3032 Computer
Aero Engine Round Table, 30 May
Aero Engine Round Table, 30 May 2018 1 Aero Engine Round Table NAG, DGTA, NLR, 30 May 2018 NLR in brief One-stop-shop Global player with Dutch roots >95 99 years young Amsterdam, Marknesse, Schiphol Innovative,
Detailed Plan of Study Form
Detailed Plan of Study Form UNIVERSITY OF DELAWARE Energy and Environmental Policy Program Name (Last, First, M.I.) Entry Term DEGREE REQUIREMENTS 1. Required Courses ENEP 821 Technology, Environment and
FACULTY PROFILE. Degree Branch / Specialization College University
FACULTY PROFILE Name Designation Email ID : S.Benjamin Franklin : Assistant Professor (Sr.Gr) : benjaminfranklin.me@srit.com Area of Specialization Total Experience : Thermal Engineering : Academic : 7
Power Electronics and Drives (PED)
Power Electronics and Drives (PED) Introduction Spurred on by technological progress and a steadily increasing concern about the efficient use of depleting energy resources, static power electronic converters
EPE 18 ECCE Europe: LIST OF KEYWORDS
EPE 18 ECCE Europe: LIST OF KEYWORDS AC machine AC-cable AC/AC converter Accelerators Acoustic noise Active damping Active filter Active Front-End Actuator Adaptive control Adjustable speed drive Adjustable
Electric Power and Energy Systems Engineering Program An Overview. February 10, 2015
Electric Power and Energy Systems Engineering Program An Overview February 10, 2015 ASU Electric Power and Energy Systems Program ASU has the one of the largest electric power and energy systems programs
SRIRAM ENGINEERING COLLEGE DEPARTMENT OF AUTOMOBILE ENGINEERING
SRIRAM ENGINEERING COLLEGE DEPARTMENT OF AUTOMOBILE ENGINEERING Name & Photo Dr. B. RAJENDRA PRASATH Designation Professor & Head Qualification UG(Specialization) Mechanical Engineering PG(Specialization)
ABE 5-Week Spring Schedule
ABE 5-Week Spring 2018-19 Schedule Spring 2019 A4 Schedule (Master dates: 1/14/19 2/16/19) BUS 101 AA Financial Accounting 1/14-2/16 M 108 BUS 205 AA Principles of Management 1/14-2/16 T 116 BUS/HSA 314
Features of PSEC Educational Programs
Power Systems & Energy Course 2018 These intensive four-week programs are designed to strike the necessary balance between energy systems engineering theory and relevant, real-world applications. With
Mechatronics & Industrial Automation Technician
Brief Program Description The Mechatronics & Industrial Automation Technician program is a 9 week program designed to help students develop the skills and knowledge needed for work as entry-level industrial
DISTRIBUTION OF UNDERGRADUATE AND GRADUATE DEGREES GRANTED BY COLLEGE OKLAHOMA STATE UNIVERSITY ACADEMIC YEAR
DEGREES GRANTED DISTRIBUTION OF UNDERGRADUATE AND GRADUATE DEGREES GRANTED BY COLLEGE ACADEMIC YEAR 2015-2016 Arts & Sci, 25.55% UNDERGRADUATE Ag Sci & Nat Res, 12.18% Spears School of Bus, 27.42% Human
BOCCONI UNIVERSITY - MILAN, ITALY
BOCCONI UNIVERSITY - MILAN, ITALY USD equivalencies for courses will be posted as they are received by the International Center. Cross reference this list with the host institution schedule to ensure the
Splitter Boxes from Liebherr. Strong and quiet-running
Splitter Boxes from Liebherr Strong and quiet-running Long operating life Liebherr multi-output pump transmissions are designed and built for tough operating conditions in construction machinery, and are
K.L.N. COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING Course Outcomes, PO & PSO Mapping Regulation 2013
S.NO K.L.N. COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING Course Outcomes, PO & PSO Mapping Regulation 2013 SEMESTER ANNA UNIVERSITY, CHENNAI - AFFILIATED INSTITUTIONS R 2013
B.A. in Arts and Sciences Major: Economics Sample 4-Year Plan
Student Student ID # Student Phone # Advisor(s) Minimum GPA 2.00 Minor/Career Interest B.A. in Arts and Sciences Major: Economics 2017-2018 Sample 4-Year Plan System Gen Ed Requirements (SGR's) Prerequisites/Comments
B.S. in Arts and Sciences Major: Entrepreneurial Studies Sample 4-Year Plan
Student Student ID # Student Phone # Advisor(s) Minimum GPA 2.00 Minor/Career Interest B.S. in Arts and Sciences Major: Entrepreneurial Studies 2017-2018 Sample 4-Year Plan System Gen Ed Requirements (SGR's)
Propulsion Controls and Diagnostics Research at NASA GRC Status Report
Propulsion Controls and Diagnostics Research at NASA GRC Status Report Dr. Sanjay Garg Branch Chief Ph: (216) 433-2685 FAX: (216) 433-8990 email: sanjay.garg@nasa.gov http://www.lerc.nasa.gov/www/cdtb
Focus Area Level Report Including Knowledge and Skills, and Performance Indicators
Including Knowledge and Skills, and PST 01. Use physical science principles and engineering applications with power, structural and technical systems to solve problems and improve performance. PST 01.01.
EXPERTS IN FLUID DYNAMICS AND STRUCTURAL ANALYSIS
EXPERTS IN FLUID DYNAMICS AND STRUCTURAL ANALYSIS Kinetic Sim is an engineering design and simulation consultancy specialising in computational fluid dynamics and structural analysis. Experience / Background
Bachelor of Arts in Economics - Business Specialization (Fall 2016) Student
Bachelor of Arts in Economics - Business Specialization (Fall 2016) Student Student ID# Anticipated Graduation Term Advisor Minimum GPA 2.00 Today's Date 2016-2017 Undergraduate Catalog Requirements System
B.S. in Arts and Sciences Major: Economics - Business Specialization Sample 4-Year Plan
Student Student ID # Student Phone # Advisor(s) Minimum GPA 2.00 Minor/Career Interest B.S. in Arts and Sciences Major: Economics - Business Specialization 2017-2018 Sample 4-Year Plan System Gen Ed Requirements
GUJARAT TECHNOLOGICAL UNIVERSITY DIPLOMA 4TH SEMESTER REGULAR SUMMER EXAM TIMETABLE
GUJARAT TECHNOLOGICAL UNIVERSITY DIPLOMA 4TH SEMESTER REGULAR SUMMER - 2013 EXAM TIMETABLE NO:- GTU/DIP/SUMMER - 2013/2987 DATE:-20-04-2013 SUBJECT CODE SUBJECT NAME EXAM DATE EXAM TIME 02 AUTOMOBILE ENGG
Consider a major in Sustainable Plant Systems
Interested in producing and managing plants in a way that conserves natural resources? Consider a major in Sustainable Plant Systems Controlled Environment Agriculture Develop technologies to efficiently
Engineering Diploma Resource Guide ST280 ETP Hydraulics (Engineering)
Engineering Diploma Resource Guide ST80 ETP Hydraulics (Engineering) Introduction Hydraulic systems are a fundamental aspect of engineering. Utilised across a variety of sectors including aviation, construction,
AC : INTEGRATING THE MECHANICAL ENGINEERING CUR- RICULUM USING A LONG-TERM GREEN DESIGN PROJECT
AC 2012-3681: INTEGRATING THE MECHANICAL ENGINEERING CUR- RICULUM USING A LONG-TERM GREEN DESIGN PROJECT Dr. Eric Constans, Rowan University Eric Constans is the Chair of the Mechanical Engineering program
U N I V E R S I T Y O F C AL I C U T Pareeksha Bhavan
U N I V E R S I T Y O F C AL I C U T Pareeksha Bhavan TIME TABLE FOR THE FIFTH SEMESTER B.TECH (2014 Scheme) DEGREE REGULAR EXAMINATIONS NOVEMBER 2016 Time of Examination : 9.30 a.m to 12.30 p.m Maximum
Dassault Systèmes Automotive Powertrain Assembly Analysis with Abaqus
Automotive Powertrain Assembly Analysis with Abaqus R 6.11 About this Course Course objectives Upon completion of this course you will be able to: Simulate engine assembly and operation conditions including
Module 16 Piston Engine Questions File Type
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with module 16 piston engine
Innovation in Fluid Power. Institute for Fluid Power Drives and Controls Institut für fluidtechnische Antriebe und Steuerungen
Innovation in Fluid Power Institute for Fluid Power Drives and Controls Institut für fluidtechnische Antriebe und Steuerungen RWTH Aachen University Facts and Figures Established in 1870 9 faculties, 260
Siemens Centre of Excellence Course Plan
Siemens Skill Development Initiatives Industry Relevant Skill Development Program for Gujarat Siemens Centre of Excellence Course Plan Page 1 Table of Contents Labs in the Siemens COE... 3 Courses offered
COURSE TITLE : GENERAL ENGINEERING COURSE CODE : COURSE CATEGORY : F PERIODS/WEEK : 4 PERIODS/SEMESTER : 72 CREDITS : 4
COURSE TITLE : GENERAL ENGINEERING COURSE CODE : COURSE CATEGORY : F PERIODS/WEEK : 4 PERIODS/SEMESTER : 72 CREDITS : 4 RATIONALE: The role of an Engineer is no longer limited to his major discipline.
UNCLASSIFIED FY 2017 OCO. FY 2017 Base
Exhibit R-2, RDT&E Budget Item Justification: PB 2017 Air Force Date: February 2016 3600: Research, Development, Test & Evaluation, Air Force / BA 2: Applied Research COST ($ in Millions) Prior Years FY
Automotive Technology
It is the mission of the Automotive Department of Victor Valley Community College to provide quality automotive instruction to a diverse community of students; the array of courses offered shall serve
GUJARAT TECHNOLOGICAL UNIVERSITY
Examination 330001 HUMAN RESOURCE MANAGEMENT 3 0 0 3 70 20 10 100 2 330201 THERMODYNAMICS & HYDRAULICS 2 0 0 2 70 20 10 100 2 330202 MANUFACTURING PROCESS & MATERIAL TECHNOLOGY GUJARAT TECHNOLOGICAL UNIVERSITY
Automotive Curriculum
Automotive Curriculum Degrees: Credential(s) AAS: Automotive Technology Tracks: Automotive Technician Track 69-72 Automotive Parts/Service Writer Track 61-64 Diploma: Automotive Technician 61-64 Automotive
Fuel Cell Application in a New Configured Aircraft PUBLISHABLE REPORT
Fuel Cell Application in a New Configured Aircraft PUBLISHABLE REPORT Document Reference CELINA Publishable Report Contract Nr. AST4-CT-2005-516126 Version/Date Version 1.3 January 2009 Issued by Airbus
Building a Portable Solar Generator
Building a Portable Solar Generator Student Authors: Saad Amjad, Aathiq Hameed, Nilushi Kariyawasam, Nabil Khaja and Onkabetse Lekgwere Overview Solar power is a sustainable, renewable, and nonpolluting
Electric Power and Energy Systems Engineering Program An Overview. R. Ayyanar 2/17/2016
Electric Power and Energy Systems Engineering Program An Overview R. Ayyanar 2/17/2016 1 Quiz National Academy of Engineering s selection for the greatest engineering achievement of the 20th Century? Electrification
ESTACA Course Catalogue Exchange students
ESTACA Course Catalogue Exchange students Curriculum at ESTACA Bachel level / Undergraduate Master level / Graduate Advanced Master 1 st year 2 nd year 3 rd year 4 th year 5 th year Advanced Master ELS
Obtaining a Converged Solution with Abaqus. Abaqus 2018
Obtaining a Converged Solution with Abaqus Abaqus 2018 About this Course Course objectives Upon completion of this course you will be able to: Understand how nonlinear problems are solved in Abaqus Develop
AEROSTAR SOLUTIONS. A Project Association AERONAUTICAL AND MECHANICAL PROJECTS FOR FINAL YEAR STUDENTS
AEROSTAR SOLUTIONS A Project Association AERONAUTICAL AND MECHANICAL PROJECTS FOR FINAL YEAR STUDENTS We had started our project center for the students who are seems too weak in subjects, lack of sources,
Introduction to Abaqus Scripting. Abaqus 2018
Introduction to Abaqus Scripting Abaqus 2018 About this Course Course objectives Help students to develop a high level understanding of the Abaqus scripting capabilities. Organize and present the technical
Design And Development Of Diesel Engines And Components (S P (Society Of Automotive Engineers))
Design And Development Of Diesel Engines And Components (S P (Society Of Automotive Engineers)) If searching for a ebook Design and Development of Diesel Engines and Components (S P (Society of Automotive
Design and Simulation of New Versions of Tube Launched UAV
21st International Congress on Modelling and Simulation, Gold Coast, Australia, 29 Nov to 4 Dec 2015 www.mssanz.org.au/modsim2015 Design and Simulation of New Versions of Tube Launched UAV Y. Zhou and
Agricultural Engineering & Diesel Technology Program Sheets
Agricultural Engineering & Diesel Technology Program Sheets 2017-2018 9 AGRICULTURAL ENGINEERING TECHNOLOGY A.A.S. CODE #0512 Agricultural Engineering is a ThinkPad University curriculum in which the use
DISTRIBUTION OF UNDERGRADUATE AND GRADUATE DEGREES GRANTED BY COLLEGE OKLAHOMA STATE UNIVERSITY ACADEMIC YEAR
DEGREES GRANTED DISTRIBUTION OF UNDERGRADUATE AND GRADUATE DEGREES GRANTED BY COLLEGE ACADEMIC YEAR 2016-2017 Arts & Sci, 23.98% UNDERGRADUATE Ag Sci & Nat Res, 12.88% Spears School of Bus, 28.44% Human
Analysis of Geotechnical Problems with Abaqus. Abaqus 2018
Analysis of Geotechnical Problems with Abaqus Abaqus 2018 About this Course Course objectives Upon completion of this course you will be able to: An overview of modeling geotechnical problems Experimental
AGRIBUSINESS. Academic Programs. Undergraduate Programs BS Agricultural Business. AGB Courses. Agribusiness
Agribusiness 1 AGRIBUSINESS Agriculture Bldg. (10), Room 210 Phone: 805.756.5000; Fax: 805.756.5040 https://agb.calpoly.edu Department Chair: Cyrus Ramezani Academic Programs Program name Agricultural
Generators for the age of variable power generation
6 ABB REVIEW SERVICE AND RELIABILITY SERVICE AND RELIABILITY Generators for the age of variable power generation Grid-support plants are subject to frequent starts and stops, and rapid load cycling. Improving
CONVERSION OF GLYCEROL TO GREEN METHANOL IN SUPERCRITICAL WATER
CONVERSION OF GLYCEROL TO GREEN METHANOL IN SUPERCRITICAL WATER Maša Knez Hrnčič, Mojca Škerget, Ljiljana Ilić, Ţeljko Knez*, University of Maribor, Faculty of Chemistry and Chemical Engineering, Laboratory
QCF level: 4 Credit value: 15
Unit 63: Electrical Power Unit code: H/601/1408 QCF level: 4 Credit value: 15 Aim This unit will develop learners understanding of electrical power systems and power distribution and the advantages and
used only in conjunction with university sponsored activities. Talking on cell phone or texting while driving are prohibited.
Office of Risk Management VEHICLE USE AND VAN DRIVER SAFETY POLICY University vehicles include all fleet vehicles owned or leased by the university, as well as any vehicles purchased, leased, or rented
ABE 5-Week Summer Schedule
ABE 5-Week Summer 2017-18 Schedule Summer 2017-18 A7 Schedule (Master dates: 5/07/18 6/09/18) ALL ABE classes as normally scheduled 5:30 PM to 9:30 PM unless otherwise noted below. Normal Campus Course
Army Ground Vehicle Use of CFD and Challenges
Army Ground Vehicle Use of CFD and Challenges Scott Shurin 586-282-8868 scott.shurin@us.army.mil : Distribution A: Approved for public release Outline TARDEC/CASSI Introduction Simulation in the Army General
ECSE-2100 Fields and Waves I Spring Project 1 Beakman s Motor
Names _ and _ Project 1 Beakman s Motor For this project, students should work in groups of two. It is permitted for groups to collaborate, but each group of two must submit a report and build the motor
Key elements of the AS3000 Wiring standards and some of the recent changes.
Key elements of the AS3000 Wiring standards and some of the recent changes. Dean of Engineering Steve Mackay Worked for 30 years in Industrial Automation 30 years experience in mining, oil and gas, electrical
Technology for Safe and Lightweight Automobiles
AUTOMOTIVE Plastics Application Technology for Safe and Lightweight Automobiles Sudhakar R. Marur Table of Contents Preface...xv Chapter 1 Introduction to Plastics Application Technology... 1 1.1 Introduction...1
Periodic Training. Maintaining high driving standards and improving road safety
Periodic Training All enquiries please call FTT Training Head Office Telephone: 08454 303 388 www.fttonline.com Maintaining high driving standards and improving road safety All About Periodic Training
using composites Blast protection of civil infrastructures and vehicles WOQDHEAD PUBLISHING LIMITED Edited by Nasim Uddin
Blast protection of civil infrastructures and vehicles using composites Edited by Nasim Uddin CRC Press Boca Raton Boston New York Washington, DC WOQDHEAD PUBLISHING LIMITED Oxford Cambridge New Delhi
Power Networks. Professor Graeme Burt Institute for Energy & Environment, University of Strathclyde
Power Networks Professor Graeme Burt Institute for Energy & Environment, University of Strathclyde g.burt@eee.strath.ac.uk Power Networks Why are networks important What are the challenges & opportunities
Automotive. Degree Automotive Technology, Associate of Science
BAKERSFIELD COLLEGE 2018/2019 CATALOG Automotive Degree Automotive Technology, Associate of Science Certificates Auto Engine Overhaul and Repair, Auto Tune-Up and Emission, Automotive Heating, Ventilation
Academic Course Description
BEE305- ELECTRICAL MACHINES Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Electrical and Electronics Engineering BEE305- ELECTRICAL MACHINES Third Semester,
MITT STUDY I N M E L BOUR N E I N STI TUTE OF T RA I N I N G AN D TE C HN OLOGY MITT
MITT M E L BOUR N E I N STI TUTE OF T RA I N I N G AN D TE C HN OLOGY MITT M I TT STUDY I N M E LB O U R NE Come join thousands of other international students studying and working in one of the world
Multiplying Environmental Action
ICAO Global Aviation Partnerships on Emissions Reductions (E-GAP) Multiplying Environmental Action Project Associate Professor Hiroshi Shibutake, Center for Aviation Innovation Research, The University
Modeling Contact with Abaqus/Standard
Modeling Contact with Abaqus/Standard 2016 About this Course Course objectives Upon completion of this course you will be able to: Define general contact and contact pairs Define appropriate surfaces (rigid