QCF level: 4 Credit value: 15
|
|
- Douglas Woods
- 6 years ago
- Views:
Transcription
1 Unit 63: Electrical Power Unit code: H/601/1408 QCF level: 4 Credit value: 15 Aim This unit will develop learners understanding of electrical power systems and power distribution and the advantages and disadvantages of alternative energy sources. Unit abstract Our modern world increasingly relies upon electrical power to supply our industries, commercial centres and homes with a convenient, flexible and reliable source of energy. To meet the client s expectations, electrical energy must be provided at a reasonable cost and transmitted to the point of need, at the appropriate voltage and current levels. The client s utilisation of the energy source needs to be appropriate, without undue complexity, to facilitate energy generation and transmission. This unit takes the learner through the complex process of analysing three-phase systems with consideration being given to harmonics and their effects. The methods of power distribution through the National Grid are then discussed with final economic considerations taken into account to enhance generation, transmission and distribution, with acceptable costs to clients. Throughout their working careers, modern engineers will have to consider new technologies and be able to evaluate the options available to make appropriate selections. With our global resources of fossil energy reserves decreasing and concerns over protecting the environment growing, alternative sources of energy are considered. Evaluative considerations will be made to inform the engineer of the issues associated with this topic, which may need to be considered far more at local and regional levels. Additionally, self-generation of electrical energy is now possible for a broad range of users throughout the world, utilising local environmental facilities. Learning outcomes On successful completion of this unit a learner will: 1 Be able to analyse three-phase systems 2 Understand the sources and effects of harmonics in power systems 3 Understand methods of power distribution 4 Understand the economics of components, power systems and alternative energy. BH Edexcel BTEC Levels 4 and 5 Higher Nationals specification in Engineering Issue 1 May 2010 Edexcel Limited
2 Unit content 1 Be able to analyse three-phase systems Fault free three-phase systems: use of j-notation (complex numbers) in the analysis of unfaulted three-phase systems eg phase sequence, balanced star supply, balanced delta supply, 4 wire and 3 wire balanced star loads, unbalanced 4 wire star loads, balanced delta loads, unbalanced delta loads Measurement of power: methods of determining power in three-phase balanced and unbalanced systems eg Blondel s theorem, integrated three-phase wattmeters, real power, reactive power, apparent power Faulted three-phase systems: connection errors and faults eg loss of neutral, loss of one line, reversed supply phase, unbalanced supply voltages, reversed phase sequence Three-phase transformers: construction eg three single-phase transformers, shell and core type; connections eg terminal marking BS 171, phasor diagrams, star, delta, zig-zag, clock number and group, parallel operation Characteristics: methods of operation of a three-phase induction motor; starting methods; current; torque and control techniques; torque speed characteristics of motor and load; steady state; operating point Load dynamics: eg dynamic stability, crawling, inertia, friction, acceleration time 2 Understand the sources and effects of harmonics in power systems Harmonics: pitch; wave theory; natural frequencies, harmonic series; resonance Sources of harmonics: transformer magnetising current; direct current power supply units; general non-linear loads Effects of harmonic: increased root-mean-square currents; zero sequence; triple-n neutral currents in star systems; triple-n currents trapped in delta transformers; overheating in neutral; overheating in motors and transformers; failure of power factor correction capacitors; harmonic resonance; skin effect losses Mitigation of harmonics: methods of mitigation such as oversized neutral, de-rating, circuit separation, K factor and factor K, isolation transformers, passive and active filters, total harmonic distortion, standards G5/4 3 Understand methods of power distribution Topology: system integrity; radial feeders; parallel feeders; open and closed rings; interconnector Operating parameters: load distribution eg radial, ring, parallel feeders, voltage and current profiles, permissible, voltage drop, power losses, power efficiency 292 BH Edexcel BTEC Levels 4 and 5 Higher Nationals specification in Engineering Issue 1 May 2010 Edexcel Limited 2010
3 4 Understand the economics of components, power systems and alternative energy Economics: economic considerations eg power factor correction, energy tariffs, Kelvin s law, compact fluorescent lighting; comparisons of single and three-phase systems; high and low efficiency motors Alternative energy: geothermal; solar; wind; water; biomass eg liquid biofuel, solid biomass, biogas Evaluation: cost (capital, operating); efficiency; energy storage; environmental impact; feasibility on large and small scale BH Edexcel BTEC Levels 4 and 5 Higher Nationals specification in Engineering Issue 1 May 2010 Edexcel Limited
4 Learning outcomes and assessment criteria Learning outcomes On successful completion of this unit a learner will: 1 Be able to analyse threephase systems Assessment criteria for pass The learner can: 1.1 solve problems involving fault free three-phase systems 1.2 measure power in three-phase systems 1.3 solve problems involving faulted three-phase systems 1.4 describe three-phase transformers 1.5 describe the characteristics of a three-phase induction motor 1.6 assess the effect of load dynamics 2 Understand the sources and effects of harmonics in power systems 3 Understand methods of power distribution 4 Understand the economics of components, power systems and alternative energy 2.1 identify typical sources of harmonics in a power system 2.2 explain the effects of harmonics in power systems 2.3 evaluate at least four different methods of mitigation of harmonics 3.1 compare different power system topologies 3.2 analyse the operating parameters of a radial and a ring distribution system 4.1 compare the economics of single-phase and threephase distribution 4.2 compare and evaluate the different forms of alternative energies. 294 BH Edexcel BTEC Levels 4 and 5 Higher Nationals specification in Engineering Issue 1 May 2010 Edexcel Limited 2010
5 Guidance Links This unit may be linked with Unit 1: Analytical Methods for Engineers and Unit 5: Electrical and Electronic Principles. Unit 35: Further Analytical Methods for Engineers would support the use of j-notation (complex numbers) required in learning outcome 1. Essential requirements Learners will need access to appropriate laboratory and test equipment (for example three-phase supply, transformer and loads, three-phase induction motor and starters, power analyser, etc). Employer engagement and vocational contexts Delivery of this unit would benefit from visits to a power station or wind farm or the attendance of guest speaker(s) with relevant experience of power generation and transmission. BH Edexcel BTEC Levels 4 and 5 Higher Nationals specification in Engineering Issue 1 May 2010 Edexcel Limited
6 296 BH Edexcel BTEC Levels 4 and 5 Higher Nationals specification in Engineering Issue 1 May 2010 Edexcel Limited 2010
Vehicle Systems and Technology
Unit 75: Vehicle Systems and Technology Unit code: D/601/1374 QCF level: 5 Credit value: 15 Aim This unit will develop learners understanding of the operating principles associated with advanced vehicle
More informationApplications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 Aim This unit aims to extend learners understanding of pneumatic and hydraulic fluid power systems
More informationAircraft Propulsion Technology
Unit 90: Aircraft Propulsion Technology Unit code: L/601/7249 QCF level: 4 Credit value: 15 Aim This unit aims to develop learners understanding of the principles and laws of aircraft propulsion and their
More informationElectrical Machines. Unit level 4 Credit value 15. Introduction. Learning Outcomes
Unit 21: Unit code Electrical Machines A/615/1495 Unit level 4 Credit value 15 Introduction Electrical machines can be found in manufacturing, transport, consumer appliances and hospitals. People will
More informationElectrical Systems and Fault Finding
Unit 31: Unit code Electrical Systems and Fault Finding A/615/1500 Unit level 4 Credit value 15 Introduction Electrical systems can be found in a very wide range of locations such as in manufacturing facilities,
More informationThree-Phase Motors and Drives
Unit 63: Three-Phase Motors and Drives Unit code: QCF Level 3: Credit value: 10 Guided learning hours: 60 Aim and purpose K/600/7117 BTEC Nationals This unit aims to give learners knowledge of three-phase
More informationAircraft Electrical Machines
Unit 73: Aircraft Electrical Machines Unit code: L/600/7210 QCF Level 3: BTEC Nationals Credit value: 10 Guided learning hours: 60 Aim and purpose This unit will provide learners with an understanding
More informationApplications of Electrical Machines
Unit 31: Features and Applications of Electrical Machines Level: 3 Unit type: Optional Assessment type: Internal Guided learning: 60 Unit introduction All electrical machines use applications of electro-magnetic
More informationAircraft Hydraulic Systems Design and Performance
Unit T25: Aircraft Hydraulic Systems Design and Performance Unit code: T/504/0126 QCF level: 6 Credit value: 15 Aim The aim of this unit is to give learners an understanding of the principles that underpin
More informationContents. Review of Electric Circuitd. Preface ;
Preface ; Chapter 1 Review of Electric Circuitd 1.1 Introduction, 1 1.2 Direct Circuit Current, 1 1.2.1 Voltage, 3 1.2.2 Power, 3 1.2.3 Ohm's Law, 5 1.2.4 KirchhofTs Laws, 5 1.2.4.1 Kirchhoff s Current
More informationContents. Prefece. List of Acronyms «xxi. Chapter 1 History of Power Systems 1
Contents Prefece xv Author xix List of Acronyms «xxi Chapter 1 History of Power Systems 1 LI Thomas A. Edison (1847-1931) 5 1.2 Nikola Tesla (1856-1943) 7 1.3 Battle of AC versus DC 8 1.4 Today's Power
More informationLight Vehicle Suspension, Steering and Braking Systems
Unit 14: Light Vehicle Suspension, Steering and Braking Systems NQF Level 3: Guided learning hours: 60 BTEC National Unit abstract Advances in engine and transmission design mean that modern vehicles have
More informationAdvanced Protective Relay Training
Advanced Protective Relay Training Contact us Today for a FREE quotation to deliver this course at your company?s location. https://www.electricityforum.com/onsite-training-rfq A properly designed protection
More informationSQA Advanced Unit specification: general information
SQA Advanced Unit specification: general information Unit title: Electrical Machine Principles Unit code: HT83 47 Superclass: XJ Publication date: August 2017 Source: Scottish Qualifications Authority
More information4-Day Power System Analysis, Coordination, System Studies
4-Day Power System Analysis, Coordination, System Studies Contact us Today for a FREE quotation to deliver this course at your company?s location. https://www.electricityforum.com/onsite-training-rfq Our
More informationRenewable Energy Grid Integration and Distributed Generation Specialization Syllabus
Renewable Energy Grid Integration and Distributed Generation Specialization Syllabus Contents: 1. DISTRIBUTED GENERATION 2. GENERATION AND STORING TECHNOLOGIES 3. CONTROL TECHNIQUES AND RENEWABLE ENERGY
More informationHigher National Unit Specification. General information for centres. Electrical Motors and Motor Starting. Unit code: DV9M 34
Higher National Unit Specification General information for centres Unit title: Electrical Motors and Motor Starting Unit code: DV9M 34 Unit purpose: This Unit has been developed to provide candidates with
More informationCourse Name: POWER ELECTRONICS Course Code: EE603 Credit: 4
Course Name: POWER ELECTRONICS Course Code: EE603 Credit: 4 Prerequisites: Sl. No. Subject Description Level of Study 01 Basic Electronics p n junction, Diode, BJT, MOSFET 1 st Sem, 2 nd Sem 02 Circuit
More informationCHAPTER 5 FAULT AND HARMONIC ANALYSIS USING PV ARRAY BASED STATCOM
106 CHAPTER 5 FAULT AND HARMONIC ANALYSIS USING PV ARRAY BASED STATCOM 5.1 INTRODUCTION Inherent characteristics of renewable energy resources cause technical issues not encountered with conventional thermal,
More informationTargeted Application of STATCOM Technology in the Distribution Zone
Targeted Application of STATCOM Technology in the Distribution Zone Christopher J. Lee Senior Power Controls Design Engineer Electrical Distribution Division Mitsubishi Electric Power Products Electric
More informationNZQA registered unit standard version 3 Page 1 of 5. Demonstrate and apply knowledge of electrical machines
Page 1 of 5 Title Demonstrate and apply knowledge of electrical machines Level 5 Credits 15 Purpose This unit standard covers knowledge and the application of d.c. and a.c. electrical machines for engineers.
More informationDC CIRCUITS ELECTROMAGNETISM
DC CIRCUITS 1. State and Explain Ohm s Law. Write in brief about the limitations of Ohm s Law. 2. State and explain Kirchhoff s laws. 3. Write in brief about disadvantages of series circuit and advantages
More informationOperation of Vehicle Systems
Unit 1: Operation of Vehicle Systems NQF Level 3: Guided learning hours: 60 BTEC National Unit abstract Modern vehicles are highly developed machines that involve sophisticated and complex systems. Engines
More informationLVI634E - Technical Data Sheet
LVI634E - Technical Data Sheet LVI634E SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationUCDI224E - Technical Data Sheet
UCDI224E - Technical Data Sheet UCDI224E SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationA Grid-Connected Dual Voltage Source Inverter with Power Quality Improvement Features Abstract
Page number 1 A Grid-Connected Dual Voltage Source Inverter with Power Quality Improvement Features Abstract A voltage regulation and power flow control scheme for a wind energy system (WES) is proposed.
More informationADF. Restoring the perfect wave
ADF Restoring the perfect wave Comsys ADF Technology helps to save energy and lower costs in industrial applications. ADF is an active solution that instantaneously restores the wave form. Restores the
More informationELECTRICAL POWER and POWER ELECTRONICS
Introduction to ELECTRICAL POWER and POWER ELECTRONICS MUKUND R PATEL (cj* CRC Press Taylor & Francis Group Boca Raton London New York CRC Press is an imprint of the Taylor & Francis Croup, an informa
More informationAcademic Course Description
BEE305- ELECTRICAL MACHINES Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Electrical and Electronics Engineering BEE305- ELECTRICAL MACHINES Third Semester,
More informationCourse Outcome Summary
Course Information Division: ASET Contact Hours: 90 Theory: 30 Lab Hours: 60 Total Credits 4 Prerequisites ELEC 125 (Fundamentals of Electricity) Course Description This course is designed to provide students
More informationGuidance to Instructors on Subject Delivery PISTON ENGINE PROPULSION. This is a suggested programme for the delivery of this subject.
Programme of learning: Guidance to Instructors on Subject Delivery This is a suggested programme for the delivery of this subject. The main headings are the Learning Outcomes (LO1, LO2, etc), with sub
More informationDemonstrate knowledge of electrical theory for Electrical Service Technician B
Demonstrate knowledge of electrical theory for Electrical Service Technician B 10937 version 4 Page 1 of 5 Level 3 Credits 3 Purpose 'Electrical Service Technician B' (EST B) refers to a class of electrical
More informationINSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad
INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad - 500 043 MECHANICAL ENGINEERING ASSIGNMENT Name : Electrical and Electronics Engineering Code : A40203 Class : II B. Tech I Semester Branch :
More informationHCI 534E/544E - Technical Data Sheet
HCI 34E/44E - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationHCI 434E/444E - Technical Data Sheet
HCI 434E/444E - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationLesson 16: Asynchronous Generators/Induction Generators
Lesson 16: Asynchronous s/induction s ET 332b Ac Motors, s and Power Systems et332bind.ppt 1 Learning Objectives After this presentation you will be able to: Explain how an induction generator erates List
More informationUCI224G - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
- Winding 311 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other
More informationElectrical Power Systems 2014/15
www.hft-education.com 2014/15 Electrical Power Engineering is fundamental to maintaining and protecting global electricity supply and preventing catastrophic power failures. With the current investment
More informationHCI 534E/544E - Technical Data Sheet
HCI 34E/44E - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationHigh-Voltage, High-Current DC- DC Converters Applications and Topologies
High-Voltage, High-Current DC- DC Converters Applications and Topologies Converters Theme Underpinning Research Underpinning Research DC Power Networks DC power can reduce losses and allow better utilisation
More informationELECTRICAL MACHINES. Theory and Practice. M.N. Bandyopadhyay
ELECTRICAL MACHINES Theory and Practice M.N. Bandyopadhyay ELECTRICAL MACHINES Theory and Practice M.N. Bandyopadhyay Director National Institute of Technology Kurukshetra Delhi-110092 2014 ELECTRICAL
More informationELEN E9501: Seminar in Electrical Power Networks. Javad Lavaei
ELEN E9501: Seminar in Electrical Power Networks Javad Lavaei Electrical Engineering Columbia University What s the course about? The course is about energy: Power Grid Transportation Systems What s the
More informationUCI224E - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
UCI224E - Winding 311 Technical Data Sheet UCI224E SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant
More informationUCI224F - Technical Data Sheet
UCI224F - Technical Data Sheet UCI224F SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationUCI224C - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
UCI224C - Winding 311 Technical Data Sheet UCI224C SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant
More informationUCI224D - Winding 311 APPROVED DOCUMENT. Technical Data Sheet. Generator Solutions AS
UCI224D - Winding 311 Technical Data Sheet UCI224D SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant
More informationUCDI274K - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000,
More informationUCI274D - Technical Data Sheet
UCI274D - Technical Data Sheet UCI274D SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationHCI 434F/444F - Technical Data Sheet
HCI 434F/444F - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationUCI274D - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS000,
More informationUCI274G - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS000,
More informationUCI274D - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
UCI274D - Winding 311 Technical Data Sheet UCI274D SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant
More informationQUESTION BANK SPECIAL ELECTRICAL MACHINES
SEVENTH SEMESTER EEE QUESTION BANK SPECIAL ELECTRICAL MACHINES TWO MARK QUESTIONS 1. What is a synchronous reluctance 2. What are the types of rotor in synchronous reluctance 3. Mention some applications
More informationHCI 534E/544E - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
HCI 34E/44E - Winding 311 Technical Data Sheet HCI34E/44E SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Stamford industrial generators meet the requirements of BS EN 60034 and the relevant
More informationHCI 534C/544C - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
HCI 34C/44C - Winding 311 Technical Data Sheet HCI34C/44C SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Stamford industrial generators meet the requirements of BS EN 60034 and the relevant
More informationUCDI224F - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS000,
More informationUCDI274K - Technical Data Sheet
UCDI274K - Technical Data Sheet UCDI274K SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationUCDI274J - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
UCDI274J - Winding 311 Technical Data Sheet UCDI274J SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant
More informationHCI 534C/544C - Technical Data Sheet
HCI 34C/44C - Technical Data Sheet HCI34C/44C SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationFuzzy based STATCOM Controller for Grid connected wind Farms with Fixed Speed Induction Generators
Fuzzy based STATCOM Controller for Grid connected wind Farms with Fixed Speed Induction Generators Abstract: G. Thrisandhya M.Tech Student, (Electrical Power systems), Electrical and Electronics Department,
More informationUCI224C - Technical Data Sheet
UCI224C - Technical Data Sheet UCI224C SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationUCM274C - Technical Data Sheet
UCM274C - Technical Data Sheet UCM274C SPECIFICATIONS & OPTIONS STANDARDS Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd or RINA. Other standards and certifications
More informationUCDI274J - Technical Data Sheet
UCDI274J - Technical Data Sheet UCDI274J SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationUCM274H - Technical Data Sheet
UCM274H - Technical Data Sheet UCM274H SPECIFICATIONS & OPTIONS STANDARDS Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd or RINA. Other standards and certifications
More informationHCI 434E/444E - Technical Data Sheet
HCI 434E/444E - Technical Data Sheet HCI434E/444E SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationHCI 534F/544F - Technical Data Sheet
HCI 34F/44F - Technical Data Sheet HCI34F/44F SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationHCI 434D/444D - Technical Data Sheet
HCI 434D/444D - Technical Data Sheet HCI434D/444D SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationUCI274H - Technical Data Sheet
UCI274H - Technical Data Sheet UCI274H SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationDepartment of Technology Fall 2004
Department of Technology Fall 2004 EET 352 ELECTRICAL POWER TECHNOLOGY Instructor: Prof. Vigs Chandra, Ph.D. Telephone: 859-622-1187 E-mail: vigs.chandra@eku.edu Web: http://www.technology.eku.edu/facstaff/chandra/
More informationFeatures of PSEC Educational Programs
Power Systems & Energy Course 2018 These intensive four-week programs are designed to strike the necessary balance between energy systems engineering theory and relevant, real-world applications. With
More informationElectrical Drives I. Week 11: Three phase Induction Motor Starting
Electrical Drives I Week 11: Three phase Induction otor Starting Starting Problem Definition: ' I r Rs Vs 2 R ' r S 2 Xeq At S=0 and S=1, thus the current can be determined as: ' I r st Vs 2 ' Rs Rr Xeq
More informationPV inverters in a High PV Penetration scenario Challenges and opportunities for smart technologies
PV inverters in a High PV Penetration scenario Challenges and opportunities for smart technologies Roland Bründlinger Operating Agent IEA-PVPS Task 14 UFTP & IEA-PVPS Workshop, Istanbul, Turkey 16th February
More informationEngineering Diploma Resource Guide ST280 ETP Hydraulics (Engineering)
Engineering Diploma Resource Guide ST80 ETP Hydraulics (Engineering) Introduction Hydraulic systems are a fundamental aspect of engineering. Utilised across a variety of sectors including aviation, construction,
More informationBCI164A - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000,
More informationHCI434C/444C - Winding 17 APPROVED DOCUMENT. Technical Data Sheet
- Winding 17 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Stamford industrial generators meet the requirements of BS EN 34 and the relevant section of other international
More informationGUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT. Course Curriculum. D C MACHINES AND TRANSFORMERS (Code: ) Electrical Engineering
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT Course Curriculum D C MACHINES AND TRANSFORMERS (Code: 3330902) Diploma Programme in which this course is offered Semester in which offered Electrical
More informationHSC Physics. Module 9.3. Motors and. Generators
HSC Physics Module 9.3 Motors and Generators 9.3 Motors and Generators (30 indicative hours) Contextual Outline Electricity is a convenient and flexible form of energy. It can be generated and distributed
More informationUCI274E - Winding 14 APPROVED DOCUMENT. Technical Data Sheet
UCI274E - Winding 14 Technical Data Sheet UCI274E SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationUCI224F - Winding 25. Technical Data Sheet APPROVED DOCUMENT
- Winding 25 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as
More informationBCI184J - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000,
More informationBCI184H - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000,
More informationR07 SET - 1
R07 SET - 1 II B. Tech II Semester Supplementary Examinations April/May 2013 ELECTRICAL MACHINES - II (Electrical and Electronics Engineering) Time: 3 hours Max. Marks: 80 Answer any FIVE Questions All
More informationPQC - STATCON The ultra fast Power Quality Compensator
PQC - STATCON The ultra fast Power Quality Compensator PQC - STATCON The ultra fast power quality compensator PQC - STATCON is based on IGBT voltage source inverter technology. It is a shunt connected
More informationUnit level 4 Credit value 15. Introduction. Learning Outcomes
Unit 6: Unit code Mechatronics T/615/1480 Unit level 4 Credit value 15 Introduction Auto-focus cameras, car cruise control and automated airport baggage handling systems are examples of mechatronic systems.
More informationUCI224F - Winding 14. Technical Data Sheet APPROVED DOCUMENT
UCI224F - Winding 14 Technical Data Sheet UCI224F SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationDEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING
DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK 16EET41 SYNCHRONOUS AND INDUCTION MACHINES UNIT I SYNCHRONOUS GENERATOR 1. Why the stator core is laminated? 2. Define voltage regulation
More informationPI144D - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE
More informationPI144J - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE
More informationVoltage optimisation Measurement and Verification guidance template
Voltage optimisation Measurement and Verification guidance template This guide is to be used in conjunction with the EEOS Guidance on authenticating and claiming energy credits (1). The aim of this guidance
More informationElectric Networks/Ina Lehto Updated Original 12/2011
1 TECHNICAL APPENDIX 2 TO THE GUIDELINES CONNECTING AN ELECTRICITY GENERATION INSTALLATION TO THE DISTRIBUTION NETWORK CONNECTING AN INSTALLATION WITH A NOMINAL RATED CAPACITY OF OVER 100 These instructions
More informationProtection of Power Electronic Multi Converter Systems in AC and DC Applications
Protection of Power Electronic Multi Converter Systems in AC and DC Applications Prof. Norbert Grass Technische Hochschule Nürnberg, Institute for Power Electronic Systems, Nuremberg, Germany, Norbert.Grass@th-nuernberg.de
More informationSwitchgear and Distribution Systems for Engineers and Technicians
Switchgear and Distribution Systems for Engineers and Technicians WHAT YOU WILL LEARN: How to identify typical characteristics of an industrial distribution system Become familiar with the main components
More informationDEPARTMENT OF EI ELECTRICAL MACHINE ASSIGNMENT 1
It is the mark of an educated mind to be able to entertain a thought without accepting it. DEPARTMENT OF EI ELECTRICAL MACHINE ASSIGNMENT 1 1. Explain the Basic concepts of rotating machine. 2. With help
More informationEH2741 Communication and Control in Electric Power Systems Lecture 3. Lars Nordström Course map
EH2741 Communication and Control in Electric Power Systems Lecture 3 Lars Nordström larsn@ics.kth.se 1 Course map 2 1 Outline 1. Repeating Power System Control 2. Power System Topologies Transmission Grids
More informationCommon Bus and Line Regeneration
Common Bus and Line Regeneration Addressing VFD applications when Regenerative Energy is Present Steve Petersen, Drives Technical Training Yaskawa America, Inc. Variable frequency drives (VFDs) are implemented
More informationPower Systems Trainer
Electrical Power Systems PSS A self-contained unit that simulates all parts of electrical power systems and their protection, from generation to utilisation Key Features Simulates generation, transmission,
More informationHCI634J - Winding 311 and 312 APPROVED DOCUMENT. Technical Data Sheet
- Winding 311 and 312 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationEmerald Reactive Support Alternative Solution Expressions of interest
Emerald Reactive Support Alternative Solution Expressions of interest Publishing Date 21/02/2017 Closing Date 21/03/2017 1. Executive Summary Ergon Energy Corporation Limited (EECL) is seeking expressions
More informationBCI164D - Technical Data Sheet
BCI164D - Technical Data Sheet BCI164D SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationBCI164B - Technical Data Sheet
BCI164B - Technical Data Sheet BCI164B SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More information