ESTACA Course Catalogue Exchange students

Size: px
Start display at page:

Download "ESTACA Course Catalogue Exchange students"

Transcription

1 ESTACA Course Catalogue Exchange students Curriculum at ESTACA Bachel level / Undergraduate Master level / Graduate Advanced Master 1 st year 2 nd year 3 rd year 4 th year 5 th year Advanced Master ELS AAD Program (2 nd semester) AAD Program (2 nd semester) AAD Program (2 nd semester) Advanced Master AOM Few facts about ESTACA: Curriculum in Engineering in 5 years Specialization school in four sects: aeronauticsn automotive, space, and rail and urban transpts Two campuses: ESTACA Paris-Saclay and ESTACA Campus Ouest A personalized and innovating teaching which answer companies needs Researchers involved in the curriculum Possible paths f exchange students at ESTACA*: SQY Laval 3 rd year (Bachel level) : 1 st semester 2 nd semester both semesters 4 th year (Master level) : 1 st semester 2 nd semester both semesters 5 th year (Master level) : 1 st semester AAD program in English (Bachel and Master level) : 2 nd semester - Possibility to do one year : 1 st semester of the 3 rd year 5 th year and 2 nd semester AAD program - Advanced Master (Fall semester program only): Embedded Lighting Systems (ELS) * see details in the following pages / subject to change ESTACA welcomes exchange students during one two semesters from the 3 rd year to the 5 th year in our programs taught in French in English. Students have the possibility to take French language courses f feigners (FLE). Our two campuses offer exchange: Paris-Saclay Laval with different specializations: Paris-Saclay: Specialization in automotive, aeronautics, Space, and rail and urban transpts + Programs in English: AAD program, 5 th year in Operation and Maintenance and Advanced Master ELS Laval: Specialization in automotive and aeronautics Exchange students have access to our internship and alumni data base. The internships with ESTACA are not allowed within the exchange program. International students can do a research project in our research labs.

2 Courses offer f exchange students in 3 rd year Program in French: Campus Paris-Saclay and Laval 1 st semester [30 32 ECTS] from September until December Transptation Engineering Unit (6 ECTS) Automotive (courses on both campuses) Automotive Architecture (12 hours) Introduction to Vehicle Dynamics (15 hours) Longitudinal Dynamics (6 hours) Combustion Engines (36 hours) Energy Management (9 hours) Aeronautics and Space (courses on both campuses) Aeronautic Architecture (24 hours) Aerodynamics (16 hours) Rail and Urban Transpts (courses only at SQY campus) Rail Architecture and Dimensioning (24 hours) Rail and Urban Transpt Architecture (16 hours) Sciences Unit (17 ECTS) Dimensioning of Mechanical Couplings (26 hours) Heat Transfer (26 hours) Systems Command and Modeling (18 hours) Systems Command by PID Controllers (18 hours) Signal Processing (26 hours) CAD (20 hours) Humanities and Engineering Culture Unit (7 ECTS) English(18 hours) Sustainable Development (12 hours) Applied Engineering Project (18 hours) Operating Reliability (12 hours) Options: Spanish, German Chinese (18 hours) optional: International Unit (2 ECTS) French as a Feign Language (FLE) From the 3 rd year, students need to head towards a specific sect: Automotive Aeronautics and Space Rail and Urban Transpts 2 nd semester [30 32 ECTS] Transptation Engineering Unit (7 ECTS) from January to May Automotive (courses on both campuses) Vehicle Dynamic Modeling 23 hours) Smart and Communicating Vehicle (VICom) (20 hours) Automotive Architecture Project (5 hours) Aeronautics and Space (courses on both campuses) Aeronautical Perfmances (25 hours) Aerodynamics 2 (11,5 hours) Methods Space Propulsion (20 hours) Aeronautical Architecture and Perfmances Project (5 hours) Rail and Urban Transpts (courses only at SQY campus) Rail Propulsion Methods (36 hours) Passenger Comft (16 hours) Rail Architecture Project (5 hours) Sciences Unit (17 ECTS) Systems Mechanics (30 hours) Fluid Mecanics (26 hours) Electric Engines (28 hours) Digital Electronics (30 hours) Digital Tools f Modeling (24 hours) OD Modeling (16 hours) Software Engineering and ULM Object Modeling (24 hours) Experimental Pratical Wk (12 hours) Humanities and Engineering Culture Unit (6 ECTS) Professional and Personal Project (15 hours) English (18 hours) School Life Involvement Options: Spanish, German Chinese (18 hours) optional: International Unit (2 ECTS) French as a Feign Language (FLE)

3 Courses offer f exchange students in 4 th year Program in French: Campus Paris-Saclay and Laval 1 st semester [30 32 ECTS] from September to December Transptation Engineering Unit (14 ECTS) Automotive (courses on both campuses) Automotive Engines Technology (10 hours) Car Race Engine (2 hours) New Motization (9 hours) Transmission and gearbox Technologies (9 hours) Engine Control (petrol and diesel) (15 hours) Powertrain services (perfmances, emissions, consumption and acoustics) (28 hours) Road holding (axles, suspension) (40 hours) Transptation project in automotive (5 hours) Aeronautics (courses on both campuses) Air rules introduction(9 hours) Aircraft Structure (21 hours) Advanced Aerodynamics (36 hours) Helicopters (24 hours) Transptation Project in Aeronautics (5 hours) Rail and Urban Transpts (courses only at SQY campus) Systems (33 hours) Railway Track and Rolling Stock Interfaces (64 hours) Railway Infrastructure (15 hours) Transptation Project in Rail and Urban Transpts (5 hours) Space (courses only at SQY campus) Space Mechanics (15 hours) Launcher Structure and Architecture (35 hours) Solid Propulsion and Propellant Aspects (26 hours) Liquid Propulsion (30 hours) Advanced Aerodynamics (36 hours) Transptation Project in Space (5 hours) Sciences Unit (11 ECTS) Finite Elements Methods (30 hours) 1 st semester at Laval, 2 nd semester at SQY Stuctural Dynamics (24 hours) 1 st semester at SQY, 2 nd semester at Laval Energy Conversion and transfer (22 hours) Multiphysics Modeling(21 hours) Continuum Mechanics (24 hours) Humanities and Engineering Culture Unit (5 ECTS) Quality (12 hours) Applied Statistics (18 hours) 1 st semester at SQY, 2 nd semester at Laval Production Management (36 hours) 1 st semester at Laval, 2 nd semester at SQY Industrial Communication (18 hours) Project Management (6 hours) Professional and Personal Project (3 hours) Options: Spanish, German Chinese (18 hours) optional: International Unit (2 ECTS) French as a Feign Language (FLE) 2 nd semester [30 32 ECTS] Transptation Engineering Unit (14 ECTS) Automotive(courses on both campuses) Braking systems (12 hours) Road holding (axles, suspension) (8 hours) Automotive life cycle (32 hours) Automotive business model (18 hours) Smart and Communicating Vehicle (VICom) (15,5 hours) Transptation project in automotive (5 hours) Aeronautics (courses on both campuses) Jet Engine integration and dimensioning (47.5 hours) Suppt systems (14 hours) Flight Mechanics (26 hours) Avionics (44 hours) Mobility inside ISAE group (one week exchange) Transptation Project in Aeronautics (5 hours) Rail and Urban Transpts (courses only at SQY campus) Regulations (28 hours) Railway Infrastructure (47 hours) Railway Track and Rolling (46 hours) Transptation Project in Rail and Urban Transpts (5 hours) Space (courses only at SQY campus) Guidance Navigation and Control (41.5 hours) Launcher Program(20,5 hours) Operating (31 hours) Mobility inside ISAE group (one week exchange) Transptation Project in Space (5 hours) Sciences Unit (17 ECTS) Communication Architecture (18,5 hours) Real-time command (20 hours) Energy Conversion and Transfert (18 hours) Hydraulic Systems (20 hours) Stuctural Dynamics (24 hours) 1 st semester at SQY, 2 nd semester at Laval Finite Elements Methods (30 hours) 1 st semester at Laval, 2 nd semester at SQY Experimental Pratical Wk (16 hours) Humanities and Engineering Culture Unit (8 ECTS) Applied Statistics (18 hours) 1 st semester at SQY, 2 nd semester at Laval Production Management (36 hours) 1 st semester at Laval, 2 nd semester at SQY Technical English (18 hours) Management, Economics and Cpate Strategy (28 hours) Professional and Personal Project (4hours) School Life Involvement Options: Spanish, German Chinese (18 hours) optional: International Unit (2 ECTS) from January to April French as a Feign Language (FLE)

4 Courses offer f exchange students in 5 th year from October to February Exchange students can choose from the following 12 specializations. Most of the courses are taught in French (some are in taught in English). New Energies and Environment Transptation Engineering Unit (16 ECTS) Alternative Fuels f Automobiles? (6 hours) Introduction to Combustion (28.5 hours) Engine Control (3 hours) Fuel-Air Mixture Preparation (24 hours) Impact of Technological Options on CO² Emissions(22 hours) Internal combustion engines remediation (20 hours) Powertrain testing: pratical wk (39 hours) Powertrain Electrification (31 hours) Visits (8 hours) Transptation Project in Automotive (100 hours) Program in French: Campus Paris-Saclay Engineering Sciences Unit (5 ECTS) 0D/1D Modeling of energy systems (15 hours) Metrology Powertrain (9 hours) Digital and Experimental Pratical Wk (60 hours) 3D Computational Fluid Dynamics (15 hours) Humanities and Engineering Culture Unit (1 ECTS) Automotive and impact on society (3 hours) Carbon footprint assessment (3 hours) Light Weight Vehicle Transptation Engineering Unit (4 ECTS) Composites Materials (35 hours) Metallic Material: Material, Product, Process Approch (28 hours) Engineering Sciences Unit (16 ECTS) Highspeed Dynamics (high defmations) (31 hours) Thin Structure Modelisation (14 hours) Study of non linearities (materials, contact, instabilities) (27 hours) Structures Optimization (36 hours) Failure, Fatigue, Damage (23 hours) Materials used in Automotive Industry (6 hours) Transptation Project in Automotive (100 hours) Humanities and Engineering Culture Unit (2 ECTS) Project Management (12 hours) Communication (3 hours) Industrial Protection (6 hours) Lean Management (17 hours) Sustainable-Mobility Transptation Engineering Unit (17 ECTS) Software ACV-Simapro (16 hours) Sustainable Development (17 hours) Introduction to Materials in the automobile sect (6 hours) Composite Materials (25 hours) Structures Optimization (15 hours) Transversal Aspects (29 hours) Electromobility (20 hours) Driveless Mobility (20 hours) SHS-Design of services and lean startup (20 hours) ITS Seminar(15 hours) Value-Creation (6 hours) Transptation Project in Automotive (100 hours) Humanities and Engineering Culture Unit (5 ECTS) Lean Management (24 hours) Communication (3 hours) Project Management (6 hours) Engineering System (6 hours) Industrial Protection (6 hours)

5 Automotive Embedded Systems Transptation Engineering Unit (19 ECTS) Automotive embedded bus and netwks (14 hours) Industrial IT (24 hours) Vision systems f transptation (12 hours) Mechatronic case study(16 hours) Embedded systems technological environment (12 hours) Multiphysics Modeling(25 hours) AUTOSAR (27 hours) Optimized code generation (24 hours) Embedded Systems f carmaker (8 hours) Model-based testing (19 hours) Modeling and code generation (12 hours) Osek (12 hours) Transptation Project in Automotive (100 hours) Humanities and Engineering Culture Unit (3 ECTS) Project Management (7 hours) Communication (7 hours) Courses offer f exchange students in 5th year from October to February Aeronautic Architecture and Structures Transptation Engineering Unit (7 ECTS) Cockpit development (18 hours) Dimensioning loads (12 hours) Structure Design selection (Drones, Military Aviation) (27 hours) Sustainable design (6 hours) Engineering Cell Systems / PLM Cell (19 hours) Engineering Sciences Unit (10 ECTS) Composites Materials (31 hours) Rupture, fatigue, damage mechanics (23 hours) Study of non linearities (materials, contact, instabilities) (15 hours) Thin Structure Modelisation (15 hours) Quality / Nondestructive Control (3 hours) Transptation Project in Aeronautics (100 hours) Humanities and Engineering Culture Unit (5 ECTS) Cost Management (8 hours) Project Management (12 hours) Technical English(15 hours) Communication (3 hours) Propulsion systems Integration and on-board Energies Transptation Engineering Unit (12 ECTS) Energy Management (40 hours) Systems Modeling (20 hours) Functional interface engine / plane (15 hours) Nacelle (30 hours) Certification (16 hours) Integration (24 hours) Engineering Sciences Unit (7 ECTS) Acoustics (20 hours) Pollution Emissions (20 hours) Aero-thermodynamics I (10 hours) Aero-thermodynamics II (8 hours) Project Unit (10 ECTS) Transptation Project in Aeronautics (100 hours) Challenge (20 hours) Humanities and Engineering Culture Unit (1 ECTS) Communication (3 hours) Project Management (8.50 hours) Futur Propulsion Systems (3 hours) Visits (14 hours)

6 Avionics and Flight Controls Transptation Engineering Unit (12 ECTS) On-board Communication Netwk (19 hours) On-Board Energy Management Systems (16 hours) Navigation Systems, Avionics and Cockpit (15 hours) System Maintenance, Integrated Observation System (12 hours) Integrated Modular Avionics, Cabin Systems (12 hours) Aircraft Flight Control System (36 hours) Specification, Design and Validation of Avionics and Flight Control Systems (31.5 hours) Transptation Project in Aeronautics (100 hours) Program in French: Campus Paris-Saclay Engineering Sciences Unit (5 ECTS) Robust and Optimal Control (28 hours) Multivariable Control Systems (16 hours) Nonlinear Control Systems (8 hours) Experimental Pratical Wk (12 hours) Humanities and Engineering Culture Unit (5 ECTS) Project Management (40 hours) Technical English (15 hours) Air Transpt Economy (6 hours) Visits(8 hours) Aeronautics Embedded Systems Transptation Engineering Unit (19 ECTS) Communication netwks (14 hours) Industrial IT (24 hours) Vision systems f transptation (12 hours) Mechatronic Case Study (16 hours) Embedded systems technological environment (12 hours) Multiphysics Modeling(25 hours) Optimized code generation (24 hours) Model-based Testing (8 hours) Scade (12 hours) Modeling and code generation (12 hours) Specification, Design and Validation of Avionics (31.5 hours) Transptation Project in Aeronautics (100 hours) Humanities and Engineering Culture Unit (3 ECTS) Project Management (7 hours) Communication (7 hours) Operation and Maintenance Transptation Engineering Unit (16 ECTS) Air regulation and certification (49 hours) Operations (54 hours) Maintenance (69 hours) Quality Certification - Nondestructive Control (3 hours) Transptation Project in Aeronautics (100 hours) Program in French: Campus Paris-Saclay Humanities and Engineering Culture Unit (6 ECTS) Technical English (15 hours) Economics (15 hours) Project Management (40 hours) Visits (8 hours) Operation and Maintenance Transptation Engineering Unit (16 ECTS) Air regulation and certification (49 hours) Operations (52 hours) Maintenance (69 hours) Quality Certification - Nondestructive Control (3 hours) Transptation Project in Aeronautics (100 hours) Program in English: Campus Paris-Saclay Humanities and Engineering Culture Unit (6 ECTS) The REACH regulation (3 hours) Dependability Management + Asset Management (4 hours) Technical English (15 hours) Economics (15 hours) Project Management (40 hours) Visits (8 hours)

7 Courses offer f exchange students in 5 th year from October to February Satellite / ATV / Re-entry Vehicles Transptation Engineering Unit (20 ECTS) ATV / Space Vehicles (33 hours) Debris / Risk Environment (11 hours) Satellites (104 hours) Re-entry Vehicles (54 hours) Program in French: Campus Paris-Saclay Humanities and Engineering Culture Unit (2 ECTS) Engineering System (3 hours) Visits: CNES, Airbus DS (16 hours) Transptation Project in Space (12 hours) Courses offer f exchange students in 5 th year From October to Febuary Conception of a Guided Transpt System and Maintenance f Rail and Urban Transpts Program in French: Campus Paris-Saclay Transptation Engineering Unit (17 ECTS) Project Management (34 hours) Transversal Vision (15 hours) Netwk Management (45 hours) Option System Design Rolling Stock design (44 hours) Transversal specific techniques f design (52 hours) Option Operations and Maintenance Operation ( 72 hours) Maintenance (20 hours) Transptation Project in (100 hours) Humanities and Engineering Culture Department(5 ECTS) Humain Management (15 hours) Transpts Economy (14 hours) Introduction Internationaux Railway System (8 hours) International Railway Industry Standard (IRIS) (8 hours) Social Relations (6 hours)

8 Automotive and Aeronautics Design Program Program in English: Campus Paris-Saclay This program is available f Bachel Master students (3 rd to 5 th year). 2 nd semester [32 ECTS] from January to May Computer Aided Engineering (2 ECTS) Catia Design and Simulation (18 hours) Signal Processing (4 ECTS) Signal Processing (Lecture) (11 hours) Matlab Labs (labwk) (12 hours) Exp Signal Processing (labwk) (4 hours) Learn and operate CAE tools to design and fit aeronautical and automotive systems and subsystems. Computational Fluid Dynamics (5 ECTS) Computational Fluid Dynamics (Lecture) (17 hours) Matlab CFD (Labwk) (3 hours) CFD with STAR-CCM+ (Labwk) (24 hours) Heat Transfer (Lecture) (20 hours) Hydraulic Systems (2 ECTS) Hydraulic systems simulation (Labwk) (15 hours) Structural Design (5 ECTS) Finite Element Method (Lecture) ADVANCED (23 hours) FEM Simulation with CATIA (Labwk) (9 hours) Crash simulation (Labwk) ADVANCED (8 hours) Dynamic Structure Analysis (exp. Labwk) (4 hours) Technical Project (8 ECTS) Project (150 hours) Project Management (2 ECTS) Project Management (10 hours) French Language and Culture (4 ECTS) French Language and Culture (45 hours)

9 Embedded Lighting Systems Advanced Master Program in English: Campus Paris-Saclay This program is available to Master students (5 th year). Limited places. 1 st semester [45 ECTS] from September to February Embedded Lighting in the industry (2 ECTS - 48 hours) The automotive lighting industry introduction, Research & Development. The automotive lighting industry: products development & production; internships and employment. Fundamentals of Embedded Lighting (12 ECTS hours) Fundamentals of optics f lighting. Fundamentals of photometry f lighting. Systems Engineering: models and functional Security Fundamentals of mechatronic Modeling of lighting systems. Creative Design of optical systems f the car industry. The ELS training program has been engineered and is delivered by academic and industrial faculty members selected f their know-how and expertise in the various domains identified by the industrial founders of the ELS Chair. It is ganised as an academic semester followed by a 5 months internship and the writing of an industrial thesis in a company. An innovative program with the best of Academic and industrial partners: PSA, Renault, Automotive Lighting, Valeo. Advanced optical design of lighting systems (6 ECTS - 48 hours) Light sources: properties & perfmances, integration, reliability. Computer aided photometric design of illumination systems. Advanced engineering and integration of lighting systems (9 ECTS - 76 hours) Integration of the physical system environment and production constraints. Mechatronic Modeling and simulation of an embedded lighting systems. Embedded infmation systems. Visual aspects and cognitive vision with advanced Simulations (6 ECTS - 48 hours) Characterisation of surfaces and of their aspect, advanced photometric simulation of surfaces. Physically realistic and real time rendering of appearance, visual and cognitive aspects in relation with design. Transversal Project (10 ECTS - 80 hours)

10 Air and Operation Maintenance Advanced Master Program in English: Campus Paris-Saclay This program is available to Master students (5 th year). Limited places. 1 st semester [45 ECTS] from October to February Air Rules (3 ECTS - 28 hours) ICAO, FAA and EAA regulations presentations Introduction to REACH Introduction to NDI Air Safety and Security (3 ECTS - 16 hours) Risk Management Current regulations and possible evolutions The lessons learned process Airline security and safety Certification and Airwthiness (4 ECTS - 30 hours) Initial Certification process (4EASA 1 FAA) Modifications Management Airwthiness Management The Air Transpt Market (2 ECTS - 19 hours) The Air Transpt Business Air Manufacturing Business Airline services The Airline / Manufacturer relationship Airline Operations (4 ECTS - 24 hours) Reminder of the main legal texts Introduction to a FCOM (public transpt) Ground operations Airline general ganization Flights management Airpt Operations (1 ECTS - 12 hours) ATM / Airpt operation links Airpt operations Slots regulation Maintenance Program Description (4 ECTS - 27 hours) Applicable regulations The MRBB process Maintenance documentation Maintenance program design Cost Management Introduction to ILS CAMO (3 ECTS - 18 hours) Introduction to CAMO Applicable rules Team wk (application of aircraft maintenance and systems maintenance noption to a real CAMO) Maintenance Processes (4 ECTS - 27 hours) Maintenance processes and regulation evolutions Project Management (5 ECTS - 40 hours) Project managmenet tools Functional analysiks Serious game Dependability Management Supply Chain (2 ECTS - 18 hours) Technical English (2 ECTS - 20 hours) Vocabulary Syntax Architecture of different technical texts (SB, OMM, TMM, JAR, FAR, etc.) Visits and Fum (40 hours) Fum ESTACA Company visits Project (8 ECTS hours) Wk on a technical managerial issue given by our industrial partners The teams will be monited by an industry tut A written and al rept required The modern air transpt industry needs engineers who have me than the traditional technical skills. The airlines need to ensure global security at an affdable cost. Their engineers need a global view of the legal and economic environment as well as an in-dept understanding of operations and maintenance processes in der to cope with a growing international competition and a complex regulaty framewk. The program is ganised as an academic semester followed by a 6 months internship and the writing of an industrial thesis in a company. An innovative program with the best of Academic and industrial partners: Air France (Airline & MRO), Airbus Group, ADP (Aéropts de Paris), Zodiac Aerospace.

BEng Honours in Aerospace, Aerospace Systems, Computer Aided, Mechanical, Manufacturing and Automotive Engineering

BEng Honours in Aerospace, Aerospace Systems, Computer Aided, Mechanical, Manufacturing and Automotive Engineering BEng Honours in Aerospace, Aerospace Systems, Computer Aided, Mechanical, Manufacturing and Automotive Engineering Level 4 Career Skills Development 4ENT1096 0 English - - AB Engineering Mathematics 4PAM7

More information

Engineering Modules generally available for CATS student Academic Year 2015/16

Engineering Modules generally available for CATS student Academic Year 2015/16 Course: BEng Honours in Aerospace, Aerospace Systems, Computer Aided, Mechanical, Manufacturing and Automotive Engineering 4AAD0028 Career Skills Development AB 0-100 4PAM1007 Engineering Mathematics A

More information

DEPARTMENT OF AUTOMOBILE ENGINEERING CURRICULUM. B. Tech. AUTOMOBILE ENGINEERING. In Specialization with MOTORSPORT ENGINEERING

DEPARTMENT OF AUTOMOBILE ENGINEERING CURRICULUM. B. Tech. AUTOMOBILE ENGINEERING. In Specialization with MOTORSPORT ENGINEERING DEPARTMENT OF AUTOMOBILE ENGINEERING CURRICULUM (Applicable for Students admitted from Academic Year 2015-16) B. Tech. AUTOMOBILE ENGINEERING In Specialization with MOTORSPORT ENGINEERING SCHOOL OF MECHANICAL

More information

(Common to ME/IP/IM/AU/MA/AE)

(Common to ME/IP/IM/AU/MA/AE) Sl. III SEMESTER Sub- 1 10MAT31 Engineering Mathematics - III 2 Material Sc. & Metallurgy / 10ME32A/ 10ME32B Metrology 3 Basic 10ME33 Thermodynamics 4 Mechanics of 10ME34 Materials 5 Process I 10ME35 (Fundamentals

More information

VEDECOM. Institute for Energy Transition. Presentation

VEDECOM. Institute for Energy Transition. Presentation VEDECOM Institute for Energy Transition Presentation version 30/01/2017 TABLE OF CONTENTS 2 1. A research ecosystem unparalleled in France 2. PFA NFI - VEDECOM 3. Corporate film 4. Aim and vision of VEDECOM

More information

Aviation Fuels & Additives

Aviation Fuels & Additives Aviation Fuels & Additives Training Course Aviation Fuels & Additives Training Course 1 2 Aviation Fuels & Additives Training Course Aviation Fuels & Additives Training Course Aviation Fuels & Additive

More information

Aviation Fuels & Additives

Aviation Fuels & Additives Aviation Fuels & Additives Training Course 1 2 Course overview Course Overview Course Background Airbus are working in collaboration with the UK Government s Department for Business, Innovation & Skills

More information

ENERGY AND PRODUCTS APPLIED STUDIES FOR ENGINEERS. PRO2 Present and Future fuels Materials. PRO4 Gas, industrial combustion and environment

ENERGY AND PRODUCTS APPLIED STUDIES FOR ENGINEERS. PRO2 Present and Future fuels Materials. PRO4 Gas, industrial combustion and environment ENERGY AND PRODUCTS APPLIED STUDIES FOR ENGINEERS Program PRO1 Refining processes PRO2 Present and Future fuels Materials PRO3 Fuels - logistics PRO4 Gas, industrial combustion and environment PRO5 Lubrication

More information

MECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL. (09 January 2016)

MECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL. (09 January 2016) MECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL (09 January 2016) Sl. No. Table ME- 1 B.Tech. (Mechanical Engineering) - 2015 Batch onwards Code COURSE

More information

Early Childhood Care & Education Diploma in Early Childhood Care & Education Teaching [DCET1] Revised Curriculum from Oct 2015 Intake 8

Early Childhood Care & Education Diploma in Early Childhood Care & Education Teaching [DCET1] Revised Curriculum from Oct 2015 Intake 8 Course Fees Payable for Part-time Diploma Courses (1H2018) Engineering Diploma in Engineering (Aerospace) [DEAS] 1 Diploma in Engineering (Building Services & Fire Safety) [DEBF] 2 Diploma in Engineering

More information

Friday Midterm EXAMINATION Fall 2018 CREDIT HOURS ENGINEERING PROGRAMS AIN SHAMS UNIVERSITY FACULTY OF ENGINEERING

Friday Midterm EXAMINATION Fall 2018 CREDIT HOURS ENGINEERING PROGRAMS AIN SHAMS UNIVERSITY FACULTY OF ENGINEERING HUM311 Engineering Management 176 HUMN362 Engineering Management 1 14:00 16:00 224, 261 CEP 011 Engineering Drawing (2) 247 14:00 16:00 901, 901A, 902A, 902B,904, 250 Friday 9-11-2018 PHM022 Waves, Electricity,

More information

University Of California, Berkeley Department of Mechanical Engineering. ME 131 Vehicle Dynamics & Control (4 units)

University Of California, Berkeley Department of Mechanical Engineering. ME 131 Vehicle Dynamics & Control (4 units) CATALOG DESCRIPTION University Of California, Berkeley Department of Mechanical Engineering ME 131 Vehicle Dynamics & Control (4 units) Undergraduate Elective Syllabus Physical understanding of automotive

More information

TRANSPORTATION TECHNOLOGY 10

TRANSPORTATION TECHNOLOGY 10 TRANSPORTATION TECHNOLOGY 10 Description In Transportation Technology 10, students will gain knowledge of safety, use of tools, and the repair and maintenance of small gas engines. Other elements of the

More information

Multiplying Environmental Action

Multiplying Environmental Action ICAO Global Aviation Partnerships on Emissions Reductions (E-GAP) Multiplying Environmental Action Eco-innovation, preparing the future Olivier Husse Air traffic growth requires to reduce environmental

More information

EM - Electromobility and Electrical Aircraft Systems

EM - Electromobility and Electrical Aircraft Systems Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2018 205 - ESEIAAT - Terrassa School of Industrial, Aerospace and Audiovisual Engineering 709 - EE - Department of Electrical Engineering

More information

LMS Imagine.Lab AMESim Ground Loads and Flight Controls

LMS Imagine.Lab AMESim Ground Loads and Flight Controls LMS Imagine.Lab AMESim Ground Loads and Flight Controls LMS Imagine.Lab Ground Loads and Flight Controls LMS Imagine.Lab Ground Loads and Flight Controls helps designers from the aerospace industry to

More information

Manufacturing Process I 10ME35 (Fundamentals of Foundry and Mechanical Computer Aided Machine 10ME36A/

Manufacturing Process I 10ME35 (Fundamentals of Foundry and Mechanical Computer Aided Machine 10ME36A/ III SEMESTER Teaching /week Sub-Code Title Dept. Pract. Duration I.A. / Total /Drg. 1 10MAT31 Engineering Mathematics - III Mathematics 04-03 25 100 125 2 Material Sc. & Metallurgy / 10ME32A/ Mechanical

More information

Podium Engineering complete race cars, vehicle prototypes high performance hybrid/electric powertrain

Podium Engineering complete race cars, vehicle prototypes high performance hybrid/electric powertrain Born in the firm belief that design quality, high project commitment and absolute respect of deadlines are key competitive factors for a consulting and engineering company, Podium Engineering is a dynamic

More information

Siemens Centre of Excellence Course Plan

Siemens Centre of Excellence Course Plan Siemens Skill Development Initiatives Industry Relevant Skill Development Program for Gujarat Siemens Centre of Excellence Course Plan Page 1 Table of Contents Labs in the Siemens COE... 3 Courses offered

More information

Automotive Curriculum

Automotive Curriculum Automotive Curriculum Degrees: Credential(s) AAS: Automotive Technology Tracks: Automotive Technician Track 69-72 Automotive Parts/Service Writer Track 61-64 Diploma: Automotive Technician 61-64 Automotive

More information

Academic Course Description

Academic Course Description BEE305- ELECTRICAL MACHINES Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Electrical and Electronics Engineering BEE305- ELECTRICAL MACHINES Third Semester,

More information

AeroGATES: PART 147 schools. AeroGATE S Project AG - 1

AeroGATES: PART 147 schools. AeroGATE S Project AG - 1 AeroGATE S Project AG - 1 T a b l e o f c o n t e n t s 1. ICAO CONTEXT... 3 2. EASA PART-147 ORGANISATION PRESENTATION... 5 3. EXPERTISE ON PART-147 ORGANISATIONS AND PROJECTS... 9 Aeronautical Maintenance

More information

SAFRAN OVERVIEW 8% OF SALES INVESTED IN R&D. $18.5 BILLION IN SALES generated in 2017 (1) #1 WORLDWIDE AEROSPACE: PROPULSION SYSTEMS

SAFRAN OVERVIEW 8% OF SALES INVESTED IN R&D. $18.5 BILLION IN SALES generated in 2017 (1) #1 WORLDWIDE AEROSPACE: PROPULSION SYSTEMS HOW BUSINESS FLIES PROPULSION Safran Aircraft Engines Safran NacellesRICAL ELECTRICAL POWER Safran Transmission Systems Safran Electrical & Power Safran Power Units Safran Landing SystemsAL LANDING AND

More information

Aerospace Stream Selection: Streams A, B, C

Aerospace Stream Selection: Streams A, B, C 24 March 2017 Aerospace Stream Selection: Streams A, B, C Daniel Feszty, PhD, PEng Associate Professor Carleton University Ottawa, ON Canadian Aerospace Important Facts and Figures Key early milestones

More information

Bachelor of Arts in Economics - Business Specialization (Fall 2016) Student

Bachelor of Arts in Economics - Business Specialization (Fall 2016) Student Bachelor of Arts in Economics - Business Specialization (Fall 2016) Student Student ID# Anticipated Graduation Term Advisor Minimum GPA 2.00 Today's Date 2016-2017 Undergraduate Catalog Requirements System

More information

The Graduate Diploma in Engineering is an AQF Level 8 qualification with a standard full-time duration of 1 year.

The Graduate Diploma in Engineering is an AQF Level 8 qualification with a standard full-time duration of 1 year. Graduate Diploma in Engineering (GDipE) 2015 These Program Rules should be read in conjunction with the University's policies (http://www.adelaide.edu.au/policies). Overview Graduate Diploma in Engineering

More information

Economics and Management of Convention and Exhibition

Economics and Management of Convention and Exhibition Holiday Optional Week Career Week Degree Design Project International Cooperation Programs Other Practice Degree Practice Manufacturing Practice Social Practice General Experi Practice of Electronic Engineering

More information

SAFRAN OVERVIEW 8% OF SALES INVESTED IN R&D. $18.5 BILLION IN SALES generated in 2017 (1) #1 WORLDWIDE AEROSPACE: PROPULSION SYSTEMS

SAFRAN OVERVIEW 8% OF SALES INVESTED IN R&D. $18.5 BILLION IN SALES generated in 2017 (1) #1 WORLDWIDE AEROSPACE: PROPULSION SYSTEMS HOW BUSINESS FLIES SAFRAN OVERVIEW PROPULSION Safran Aircraft Engines Safran Nacelles CTRICAL ELECTRICAL POWER Safran Transmission Systems Safran Electrical & Power Safran Power Units Safran Landing Systems

More information

students (mostly MS level, partially BS and PhD) academic staff

students (mostly MS level, partially BS and PhD) academic staff The (established 1707) and the Mechanical Engineering Faculty of the CTU 8 faculties - Civil Eng, MechEng, ElEng, Informatics, NucEng, TranspEng, BioMedEng and Architecture/Styling 21 000 students (mostly

More information

SUMMER LUXURY ACADEMY

SUMMER LUXURY ACADEMY SUMMER CERTIFICATE PROGRAM SUMMER LUXURY ACADEMY Certificate awarded by: Groupe ESCE International Business School Arrival date: July 1 st, 2015 Welcome event: July 2 nd, 2015 Start date: : July 2 nd,

More information

Qatar University Electrical Energy Education. Rashid Alammari Associate Prof. Dept. of Electrical Eng. Qatar Univ.

Qatar University Electrical Energy Education. Rashid Alammari Associate Prof. Dept. of Electrical Eng. Qatar Univ. Qatar University Electrical Energy Education Associate Prof. Dept. of Electrical Eng. Qatar Univ. Tuesday, December 15, 2009 1 Contents Introduction Course Offerings Labs University/Industry Relationship

More information

Future. Created in Hamburg. ZAL - Center of Applied Aeronautical Research - E-Lass Conference 1

Future. Created in Hamburg. ZAL - Center of Applied Aeronautical Research - E-Lass Conference 1 Future. Created in Hamburg. 1 January 2018 Dr.-Ing. Christof Borrmann CoC Aircraft Manufacturing & MRO E-Lass Conference Overview of assembly strategies in aircraft manufacturing 2 January 2018 ZAL Center

More information

KCTCS AAS IN ENGINEERING AND ELECTRONICS TECHNOLOGY ROBOTICS AND AUTOMATION TRACK TO NKU BS IN MECHATRONICS ENGINEERING TECHNOLOGY CHECKLIST

KCTCS AAS IN ENGINEERING AND ELECTRONICS TECHNOLOGY ROBOTICS AND AUTOMATION TRACK TO NKU BS IN MECHATRONICS ENGINEERING TECHNOLOGY CHECKLIST Associate of Applied Science in Engineering and Electronics Technology Robotics and Automation Track To Bachelor of Science in Mechatronics Engineering Technology Completion of the following curriculum

More information

MEDIA BRIEF. Website: Contact: Social Media:

MEDIA BRIEF. Website:   Contact: Social Media: MEDIA BRIEF Overview Founded in 2015, TransPod is designing the world s leading hyperloop system to make ultra-high-speed ground transportation a reality. TransPod s system will move people faster, with

More information

FACULTY PROFILE. Degree Branch / Specialization College University

FACULTY PROFILE. Degree Branch / Specialization College University FACULTY PROFILE Name Designation Email ID : S.Benjamin Franklin : Assistant Professor (Sr.Gr) : benjaminfranklin.me@srit.com Area of Specialization Total Experience : Thermal Engineering : Academic : 7

More information

COURSE NUMBER & COURSE TITLE: ME 300 Fundamentals of Internal Combustion Engine

COURSE NUMBER & COURSE TITLE: ME 300 Fundamentals of Internal Combustion Engine COURSE NUMBER & COURSE TITLE: ME 300 Fundamentals of Internal Combustion Engine INSTRUCTOR: Xingcai Lu, Xinqi Credits: 3 Qiao REQUIRED COURSE OR ELECTIVE COURSE: Required COURSE STRUCTURE/SCHEDULE: 1.

More information

Covering Letter and CV to Chalmers

Covering Letter and CV to Chalmers Covering Letter and CV to Chalmers My name is Ingemar Johansson and I recently returned to Sweden after having lived and worked in England for 15 years. I have worked mainly within automotive engineering

More information

Future Trends for Power Systems

Future Trends for Power Systems Future Trends for Power Systems A Short Course to Honour Professor David Hill Centre of Excellence in Power Engineering & Australian Power Institute 12 October 2009 Future Trends for Power Systems Happy

More information

Automotive Research Centre Niedersachsen Niedersächsisches Forschungszentrum Fahrzeugtechnik. Braunschweig, November 2015

Automotive Research Centre Niedersachsen Niedersächsisches Forschungszentrum Fahrzeugtechnik. Braunschweig, November 2015 Automotive Research Centre Niedersachsen Niedersächsisches Forschungszentrum Fahrzeugtechnik Braunschweig, November 2015 The Location Concept of the NFF November 2015 NFF presentation Page 2 Welcome to

More information

ACSEP - Applications and Control of Power Electronic Systems

ACSEP - Applications and Control of Power Electronic Systems Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2018 205 - ESEIAAT - Terrassa School of Industrial, Aerospace and Audiovisual Engineering 710 - EEL - Department of Electronic Engineering

More information

Ricardo engineered vehicle concept aims to reduce aircraft fuel costs, CO 2 emissions and noise

Ricardo engineered vehicle concept aims to reduce aircraft fuel costs, CO 2 emissions and noise 18 November 2009 Ricardo engineered vehicle concept aims to reduce aircraft fuel costs, CO 2 emissions and noise Taxiing to and from the airport terminal gate and runway is a major source of CO 2 emissions.

More information

Automobile Engineering

Automobile Engineering xiii xiv Course Code DEPARTMENT OF AUTOMOBILE ENGINEERING Course title xv Prerequisites Co-requisites SEMESTER - I 15PD101 Soft Skills 15MA101 Calculus And Solid Geometry 15PY101 Physics 15PY101L Physics

More information

2007 Training: Basic training of AVL Fire software 2006 Seminar: Proactive approach of Croatian laboratories to the use of EU funds.

2007 Training: Basic training of AVL Fire software 2006 Seminar: Proactive approach of Croatian laboratories to the use of EU funds. CURRICULUM VITAE Personal information Name: Darko Surname: Kozarac Date of birth: 18 th September 1975. Place of birth: Zagreb Address: Suncani brijeg 42, 10000 Zagreb, Croatia e-mail: darko.kozarac@fsb.hr

More information

Aviation Research Group RPAS (Remotely Piloted Aircraft Systems) OOSTENDE Belgium

Aviation Research Group RPAS (Remotely Piloted Aircraft Systems) OOSTENDE Belgium RPAS (Remotely Piloted Aircraft Systems) OOSTENDE Belgium I. Becuwe, R. De Roo 1 Location Ostend 1h30 1h Lille (F) Brussels I. Becuwe, R. De Roo 2 VIVES Brugge Oostende Torhout Tielt Roeselare Kortrijk

More information

Technologie- und Innovationstrends in der Luftfahrt

Technologie- und Innovationstrends in der Luftfahrt Technologie- und Innovationstrends in der Luftfahrt Joachim Szodruch DLR Folie 1 > Joachim Szodruch Um große Dinge zu erreichen, müssen wir nicht nur agieren, sondern auch träumen; Folie 2 > Joachim Szodruch

More information

Thank you for this opportunity to present what we have been working on to develop a long term and enduring strategy to you and get guidance.

Thank you for this opportunity to present what we have been working on to develop a long term and enduring strategy to you and get guidance. NASA Aeronautics Research Success Through Interdependence Jaiwon Shin Associate Administrator Aeronautics Research Mission Directorate 1 Thank you for this opportunity to present what we have been working

More information

VIRTUAL VEHICLE Research Center

VIRTUAL VEHICLE Research Center VIRTUAL VEHICLE Research Center Automotive Rail Aerospace HARD FACTS SHAREHOLDERS Founded: July 2002 Staff: Turnover: Location: > 200 employees EUR 22 million Graz, Austria Interdisciplinary Research Topics

More information

SRIRAM ENGINEERING COLLEGE DEPARTMENT OF AUTOMOBILE ENGINEERING

SRIRAM ENGINEERING COLLEGE DEPARTMENT OF AUTOMOBILE ENGINEERING SRIRAM ENGINEERING COLLEGE DEPARTMENT OF AUTOMOBILE ENGINEERING Name & Photo Dr. B. RAJENDRA PRASATH Designation Professor & Head Qualification UG(Specialization) Mechanical Engineering PG(Specialization)

More information

Articulation Course Guide and High School Teacher Requirements

Articulation Course Guide and High School Teacher Requirements Articulation Course Guide and High School Teacher Requirements This document outlines courses approved by FV for high school articulation consideration along with teacher qualification and certification

More information

The Effects of Damage and Uncertainty on the Aeroelastic / Aeroservoelastic Behavior and Safety of Composite Aircraft. JAMS Meeting, May

The Effects of Damage and Uncertainty on the Aeroelastic / Aeroservoelastic Behavior and Safety of Composite Aircraft. JAMS Meeting, May The Effects of Damage and Uncertainty on the Aeroelastic / Aeroservoelastic Behavior and Safety of Composite Aircraft JAMS Meeting, May 2010 1 JAMS Meeting, May 2010 2 Contributors Department of Aeronautics

More information

Project Book Engine Tech

Project Book Engine Tech Project Book Engine Tech 01 Story & Vision Innovation - Excellence - Experience Vision: Story: Our solutions lead to new standards in the High-tech Industry. We design innovations with experience and excellence

More information

The Future of Automobiles and Mobility

The Future of Automobiles and Mobility The Future of Automobiles and Mobility Call for Papers www.fisita2008.com Organised by VDI Our Challenges: Road Safety, Energy and Environment Dear members of the automotive society, The Association of

More information

Syllabus: Automated, Connected, and Intelligent Vehicles

Syllabus: Automated, Connected, and Intelligent Vehicles Page 1 of 8 Syllabus: Automated, Connected, and Intelligent Vehicles Part 1: Course Information Description: Automated, Connected, and Intelligent Vehicles is an advanced automotive technology course that

More information

Tuition fees. Taught courses Important notes about fees

Tuition fees. Taught courses Important notes about fees Tuition s Taught courses 2017-2018 Important notes about s The s outlined within this document apply to all students whose initial date of registration falls on or between 1 August 2017 and 31 July 2018.

More information

CMI Defence, the authority for weapons systems integrated on high-mobility armoured vehicles

CMI Defence, the authority for weapons systems integrated on high-mobility armoured vehicles CMI Defence, the authority for weapons systems integrated on high-mobility armoured vehicles CMI, an international growing group CMI, solutions for every market CMI designs, installs, upgrades and services

More information

ME 455 Lecture Ideas, Fall 2010

ME 455 Lecture Ideas, Fall 2010 ME 455 Lecture Ideas, Fall 2010 COURSE INTRODUCTION Course goal, design a vehicle (SAE Baja and Formula) Half lecture half project work Group and individual work, integrated Design - optimal solution subject

More information

Balancing operability and fuel efficiency in the truck and bus industry

Balancing operability and fuel efficiency in the truck and bus industry Balancing operability and fuel efficiency in the truck and bus industry Realize innovation. Agenda The truck and bus industry is evolving Model-based systems engineering for truck and bus The voice of

More information

ITD Systems Core Partners Wave 04

ITD Systems Core Partners Wave 04 ITD Systems Core Partners Wave 04 JTI-CS2-2016-CPW04-SYS Innovation Takes Off Not legally binding Network Solutions for future cockpit communications General Information Key information Topic: Networking

More information

FAMU Completers Satisfaction Survey Results 2010

FAMU Completers Satisfaction Survey Results 2010 FAMU Completers Satisfaction Survey Results 2010 Non-Member record_type Frequency Percent Percent Cumulative Percent 35 100.0 100.0 100.0 Race: Frequency Percent Percent Cumulative Percent Black 30 85.7

More information

Our courses. EASA Regulation - Aviation. Management & Quality. Engineering Courses. Other courses Page 13. Page 3. Page 9. Page 11

Our courses. EASA Regulation - Aviation. Management & Quality. Engineering Courses. Other courses Page 13. Page 3. Page 9. Page 11 Courses Catalogue Our courses Flyon.Aero courses are divided in three major fields: EASA Regulation - Aviation Management & Quality Engineering Courses Page 3 Page 9 Page 11 Other available courses combines

More information

HARLEY-DAVIDSON. Motorcycle Technician Training & Professional Development Program

HARLEY-DAVIDSON. Motorcycle Technician Training & Professional Development Program HARLEY-DAVIDSON Motorcycle Technician Training & Professional Development Program 274 N. Industrial Drive Frontenac, KS 66763 (FSCC LOGO) (620) 231-3819 www.fortscott.edu HARLEY-DAVIDSON & Fort Scott Community

More information

MAV and UAV Research at Rochester Institute of Technology. Rochester Institute of Technology

MAV and UAV Research at Rochester Institute of Technology. Rochester Institute of Technology MAV and UAV Research at Andrew Streett 5 th year BS/MS Student 2005-2006 MAV Team Lead Jason Grow BS/MS Graduate of RIT 2003-2004 MAV Team Lead Boeing Phantom Works, HB 714-372-9026 jason.a.grow@boeing.com

More information

GUI Customization with Abaqus. Abaqus 2017

GUI Customization with Abaqus. Abaqus 2017 GUI Customization with Abaqus Abaqus 2017 About this Course Course objectives The goal of this course is to train you to use the Abaqus GUI Toolkit to customize the Abaqus/CAE interface or build your own

More information

Academic Course Description

Academic Course Description BME 503 FLUID POWER SYSTEMS Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Mechanical Engineering BME 503 FLUID POWER SYSTEMS Fifth Semester, 2015-16

More information

DISTRIBUTION OF UNDERGRADUATE AND GRADUATE DEGREES GRANTED BY COLLEGE OKLAHOMA STATE UNIVERSITY ACADEMIC YEAR

DISTRIBUTION OF UNDERGRADUATE AND GRADUATE DEGREES GRANTED BY COLLEGE OKLAHOMA STATE UNIVERSITY ACADEMIC YEAR DEGREES GRANTED DISTRIBUTION OF UNDERGRADUATE AND GRADUATE DEGREES GRANTED BY COLLEGE ACADEMIC YEAR 2015-2016 Arts & Sci, 25.55% UNDERGRADUATE Ag Sci & Nat Res, 12.18% Spears School of Bus, 27.42% Human

More information

Large Passenger Aircraft IADP

Large Passenger Aircraft IADP Large Passenger Aircraft IADP Main demonstrators and objectives J. König M. Goulain Airbus CleanSky 2 consultation meeting on Eco design, Monday 22 April 2013 Frankfurt Germany 1 1 CleanSky 2 Large Passenger

More information

SUBJECT CODES FOR VARIOUS COURSES UNDER JNTU KAKINADA

SUBJECT CODES FOR VARIOUS COURSES UNDER JNTU KAKINADA SUBJECT CODES FOR VARIOUS COURSES UNDER JNTU KAKINADA COURSE BRANCH REG YEAR SEM SUBJECT TITLE CODE CODE B.Tech 01 R10 1 1 R10111 ENGLISH PROFICIENCY B.Tech 01 R10 1 1 R10108 ENGINEERING PHYSICS AND ENGINEERING

More information

THE FKFS 0D/1D-SIMULATION. Concepts studies, engineering services and consulting

THE FKFS 0D/1D-SIMULATION. Concepts studies, engineering services and consulting THE FKFS 0D/1D-SIMULATION Concepts studies, engineering services and consulting r e s e a r c h i n m o t i o n. VEHICLE IN MOTION On the basis of constant engine speeds and loads, the combustion engine

More information

Composites Modeler for Abaqus/CAE. Abaqus 2018

Composites Modeler for Abaqus/CAE. Abaqus 2018 Composites Modeler for Abaqus/CAE Abaqus 2018 About this Course Course objectives In this course you will learn about: Composites Modeler for Abaqus/CAE, an add-on product to Abaqus/CAE How to use Composites

More information

INNOVATION POWERING SAFRAN

INNOVATION POWERING SAFRAN INNOVATION POWERING SAFRAN Stéphane CUEILLE, Chief Technology Officer 106 Safran - Capital Markets Day / November 29, Technology, key to our competitiveness R&T plan BUSINESSES PROPULSION EQUIPMENT INTERIORS

More information

AC : USE OF POWER WHEELS CAR TO ILLUSTRATE ENGI- NEERING PRINCIPLES

AC : USE OF POWER WHEELS CAR TO ILLUSTRATE ENGI- NEERING PRINCIPLES AC 2011-2029: USE OF POWER WHEELS CAR TO ILLUSTRATE ENGI- NEERING PRINCIPLES Dr. Howard Medoff, Pennsylvania State University, Ogontz Campus Associate Professor of Engineering, Penn State Abington Research

More information

UNCLASSIFIED FY 2017 OCO. FY 2017 Base

UNCLASSIFIED FY 2017 OCO. FY 2017 Base Exhibit R-2, RDT&E Budget Item Justification: PB 2017 Air Force Date: February 2016 3600: Research, Development, Test & Evaluation, Air Force / BA 2: Applied Research COST ($ in Millions) Prior Years FY

More information

QUALITY & ENGINEERING INNOVATION STRATEGY CARLA GOHIN RESEARCH, INNOVATION & ADVANCED TECHNOLOGIES

QUALITY & ENGINEERING INNOVATION STRATEGY CARLA GOHIN RESEARCH, INNOVATION & ADVANCED TECHNOLOGIES INNOVATION STRATEGY CARLA GOHIN RESEARCH, INNOVATION & ADVANCED TECHNOLOGIES A digital and connected world A DEEP MUTATION Green Planet Aging population Globalization Increasing urbanisation From possession

More information

B.S. in Arts and Sciences Major: Entrepreneurial Studies Sample 4-Year Plan

B.S. in Arts and Sciences Major: Entrepreneurial Studies Sample 4-Year Plan Student Student ID # Student Phone # Advisor(s) Minimum GPA 2.00 Minor/Career Interest B.S. in Arts and Sciences Major: Entrepreneurial Studies 2017-2018 Sample 4-Year Plan System Gen Ed Requirements (SGR's)

More information

DISTRIBUTION OF UNDERGRADUATE AND GRADUATE DEGREES GRANTED BY COLLEGE OKLAHOMA STATE UNIVERSITY ACADEMIC YEAR

DISTRIBUTION OF UNDERGRADUATE AND GRADUATE DEGREES GRANTED BY COLLEGE OKLAHOMA STATE UNIVERSITY ACADEMIC YEAR DEGREES GRANTED DISTRIBUTION OF UNDERGRADUATE AND GRADUATE DEGREES GRANTED BY COLLEGE ACADEMIC YEAR 2016-2017 Arts & Sci, 23.98% UNDERGRADUATE Ag Sci & Nat Res, 12.88% Spears School of Bus, 28.44% Human

More information

Dongfeng Commercial Vehicle

Dongfeng Commercial Vehicle Automotive and transportation Dongfeng Commercial Vehicle Product Simcenter Leading truck manufacturer optimizes engine cooling controls strategies with Simcenter Amesim Business challenges Cut truck development

More information

COURSE 4-9 March, 2018 Auditorium 1003, Mayer Bld. Electrical Engineering Dept. Technion

COURSE 4-9 March, 2018 Auditorium 1003, Mayer Bld. Electrical Engineering Dept. Technion COURSE 4-9 March, 2018 Auditorium 1003, Mayer Bld. Electrical Engineering Dept. Technion Robust Power Semiconductor IC Systems The course conveys a solid understanding of the use of modern semiconductor

More information

CMI Defence, The authority for weapon systems integrated on high-mobility armoured vehicles

CMI Defence, The authority for weapon systems integrated on high-mobility armoured vehicles CMI Defence, The authority for weapon systems integrated on high-mobility armoured vehicles CMI INDUSTRY CMI DEFENCE CMI SERVICES CMI ENERGY CMI, an international growing group CMI Solutions for every

More information

VEDECOM. Institute for Energy Transition. Prénom - Nom - Titre. version

VEDECOM. Institute for Energy Transition. Prénom - Nom - Titre. version VEDECOM Institute for Energy Transition Prénom - Nom - Titre version VEDECOM: COLLABORATIVE RESEARCH HUB 2 Foundation of the Université de Versailles Saint-Quentin-en-Yvelines (UVSQ) Certified as Institute

More information

OSNABRÜCK UNIVERSITY OF APPLIED SCIENCES

OSNABRÜCK UNIVERSITY OF APPLIED SCIENCES OSNABRÜCK UNIVERSITY OF APPLIED SCIENCES Osnabrück Germany V07/07/17 13:00 Exchanges Portfolio KEY FACTS Subject Area Business & Languages; Marketing & Languages Language Classes are taught in English

More information

B.S. in Arts and Sciences Major: Economics - Business Specialization Sample 4-Year Plan

B.S. in Arts and Sciences Major: Economics - Business Specialization Sample 4-Year Plan Student Student ID # Student Phone # Advisor(s) Minimum GPA 2.00 Minor/Career Interest B.S. in Arts and Sciences Major: Economics - Business Specialization 2017-2018 Sample 4-Year Plan System Gen Ed Requirements

More information

B.A. in Arts and Sciences Major: Economics Sample 4-Year Plan

B.A. in Arts and Sciences Major: Economics Sample 4-Year Plan Student Student ID # Student Phone # Advisor(s) Minimum GPA 2.00 Minor/Career Interest B.A. in Arts and Sciences Major: Economics 2017-2018 Sample 4-Year Plan System Gen Ed Requirements (SGR's) Prerequisites/Comments

More information

MTU Maintenance Zhuhai. The passion for perfection. MTU Maintenance Zhuhai An MTU Aero Engines Company

MTU Maintenance Zhuhai. The passion for perfection. MTU Maintenance Zhuhai An MTU Aero Engines Company MTU Maintenance Zhuhai The passion for perfection MTU Maintenance Zhuhai An MTU Aero Engines Company MTU_Standort_Brosch_Zhuhai_2009_01.qxd Center of excellence in Asia 13.11.2009 14:02 Uhr Seite 2 MTU

More information

Introduction to Abaqus Scripting. Abaqus 2018

Introduction to Abaqus Scripting. Abaqus 2018 Introduction to Abaqus Scripting Abaqus 2018 About this Course Course objectives Help students to develop a high level understanding of the Abaqus scripting capabilities. Organize and present the technical

More information

PROPULSION SYSTEMS FOR HYBRID VEHICLES (POWER & ENERGY) BY JOHN M. MILLER

PROPULSION SYSTEMS FOR HYBRID VEHICLES (POWER & ENERGY) BY JOHN M. MILLER Read Online and Download Ebook PROPULSION SYSTEMS FOR HYBRID VEHICLES (POWER & ENERGY) BY JOHN M. MILLER DOWNLOAD EBOOK : PROPULSION SYSTEMS FOR HYBRID VEHICLES (POWER & Click link bellow and free register

More information

Fuel Cell Application in a New Configured Aircraft PUBLISHABLE REPORT

Fuel Cell Application in a New Configured Aircraft PUBLISHABLE REPORT Fuel Cell Application in a New Configured Aircraft PUBLISHABLE REPORT Document Reference CELINA Publishable Report Contract Nr. AST4-CT-2005-516126 Version/Date Version 1.3 January 2009 Issued by Airbus

More information

Evolution of MDO at Bombardier Aerospace

Evolution of MDO at Bombardier Aerospace Evolution of MDO at Bombardier Aerospace 6 th Research Consortium for Multidisciplinary System Design Workshop Ann Arbor, Michigan July 26 th - 27 th, 2011 Pat Piperni MDO Project Manager Bombardier Aerospace

More information

Training Course Schedule

Training Course Schedule Schedule July 2018 17 Compliance Audit Management 17-19 Cabin Safety Design- Certf. of Interior Changes & Repairs - Large Aeroplanes 18-20 Auditing in a Maintenance Environment 18-20 EASA Air Operations

More information

Diesel Jet at a glance

Diesel Jet at a glance Company Overview Diesel Jet at a glance DieselJet was established in 2003. Since 2011 it is owned by METATRON, an industrial group operating in the automotive field as CNG and LPG systems manufacturer.

More information

R&D: FUTURE-PROOFING THE BMW GROUP. DR. HERBERT DIESS MEMBER OF THE BOARD OF MANAGEMENT OF BMW AG, DEVELOPMENT

R&D: FUTURE-PROOFING THE BMW GROUP. DR. HERBERT DIESS MEMBER OF THE BOARD OF MANAGEMENT OF BMW AG, DEVELOPMENT March 20, 2013 R&D: FUTURE-PROOFING THE BMW GROUP. DR. HERBERT DIESS MEMBER OF THE BOARD OF MANAGEMENT OF BMW AG, DEVELOPMENT OVERVIEW. 1 Challenges in the automotive industry 2 Our solutions Evolution

More information

The Future Sustainable Energy System Synergy between industry, researchers and students as a key to an efficient energy system transformation

The Future Sustainable Energy System Synergy between industry, researchers and students as a key to an efficient energy system transformation The Future Sustainable Energy System Synergy between industry, researchers and students as a key to an efficient energy system transformation Jacob Østergaard Professor and Head of Centre Technology and

More information

FLYING CAR NANODEGREE SYLLABUS

FLYING CAR NANODEGREE SYLLABUS FLYING CAR NANODEGREE SYLLABUS Term 1: Aerial Robotics 2 Course 1: Introduction 2 Course 2: Planning 2 Course 3: Control 3 Course 4: Estimation 3 Term 2: Intelligent Air Systems 4 Course 5: Flying Cars

More information

Automotive Technology

Automotive Technology It is the mission of the Automotive Department of Victor Valley Community College to provide quality automotive instruction to a diverse community of students; the array of courses offered shall serve

More information

ABE 5-Week Spring Schedule

ABE 5-Week Spring Schedule ABE 5-Week Spring 2018-19 Schedule Spring 2019 A4 Schedule (Master dates: 1/14/19 2/16/19) BUS 101 AA Financial Accounting 1/14-2/16 M 108 BUS 205 AA Principles of Management 1/14-2/16 T 116 BUS/HSA 314

More information

European Bus System of the Future

European Bus System of the Future European Bus System of the Future Project Experience Brussels, 13 th November 2013 1 Research and Innovation in Public Transport Innovation in PT = high investments / bad ROI Financial risk sharing welcome

More information

GUJARAT TECHNOLOGICAL UNIVERSITY

GUJARAT TECHNOLOGICAL UNIVERSITY GUJARAT TECHNOLOGICAL UNIVERSITY Draft Teaching Scheme : B.E. Course : (W.E.F.: 2016-2017) Aeronautical Engineering (01) Theory Marks utorial/ Practical Mark Total Branch Aircraft Design II 4 0 2 6 70

More information

Aero Engine Round Table, 30 May

Aero Engine Round Table, 30 May Aero Engine Round Table, 30 May 2018 1 Aero Engine Round Table NAG, DGTA, NLR, 30 May 2018 NLR in brief One-stop-shop Global player with Dutch roots >95 99 years young Amsterdam, Marknesse, Schiphol Innovative,

More information

Advanced Abaqus Scripting. Abaqus 2018

Advanced Abaqus Scripting. Abaqus 2018 Advanced Abaqus Scripting Abaqus 2018 About this Course Course objectives Help students to develop a high level understanding of the Abaqus scripting capabilities and gain some proficiency. Organize and

More information

LMS Imagine.Lab AMESim Electromechanical

LMS Imagine.Lab AMESim Electromechanical LMS Imagine.Lab AMESim Electromechanical LMS Imagine.Lab Electromechanical LMS Imagine.Lab Electromechanical helps engineers define straightforward strategies throughout the design process of electrical

More information

Training Course Schedule

Training Course Schedule Training Schedule May 2018 2-4 Human Factors for Maintenance 2-4 DOA - Annex Part-21 Training 3 Performance Based Navigation (PBN) - Introduction 3 Aircraft Registration Training 4 Introduction to Aviation

More information