MCUI NUMBER PLATES AND NUMBERS

Transcription

1 MCU NUMBER PLATES AND NUMBERS 1. Number plates must be rectangular or elliptical in shape with minimum measurements of 285mm x 235mm. n place of separate plates a space of equivalent size in matt colours can be painted or fixed on the bodywork or streamlining. Plates which are just a larger outline of the number are not permitted. n the case of bodywork of a similar colour to the specified number plate background colour, there must be a minimum 5mm black line all around the perimeter of the number plate. 2. The allocated number and plate must be affixed to the front and the two sides of the motorcycle so that both front and side numbers are clearly visible to the public and officials ON BOTH SDES OF THE TRACK as follows: FRONT NUMBERS must be fitted directly on the front of the fairing and not to one side. All fairings may be modified to accommodate this. Where the design of the fairing makes this MPOSSBLE the numbers must be fixed on BOTH sides of the front fairing. SDE NUMBERS must be fitted to the middle or lower part of the side fairing. Side numbers can also be fitted to the seat fairing subject to being clearly visible to the public and officials. 3. The figures must be clearly legible and like the background must be in matt colours to avoid reflection from sunlight. The minimum dimensions of the numbers being: Figures to be of the form shown in the diagram at (7) and to be solid in colour - shading or outlining in a different colour is not permitted. 4. Advertising must not appear on the number plate and a space of at least 50mm must be left free around all number plates in which no advertising may appear. No advertising may appear within in the figures of the number. All other numbers or markings on a motorcycle liable to cause confusion with the number must be removed. Height of figure: 160mm (front number) 120mm (side number) Width of figure: Width of stroke: Space between two figures: 80mm (front number) 25mm 15mm 60mm (side number) 4. Advertising must not appear on the number plate and a space of at least 50mm must be left free around all number plates in which no advertising may appear. No advertising may appear within in the figures of the number. All other numbers or markings on a motorcycle liable to cause confusion with the number must be removed. Page 56 MCU Updated January 2013

2 5. The following matt colours, with corresponding RAL codes shall be used. Black RAL 9005 Red RAL 3020 Blue RAL 5010 Green RAL 6002 Yellow RAL 1003 White RAL 9010 Background Colour Number Colour Classes Black Background White Numbers Production 125cc - 125ccGP Moto 450 Green Background White Numbers 250cc GP Classic 250cc Blue Background White Numbers 350cc GP Classic 350cc Supersport 400(250cc&400cc) Supertwins (up to Yellow Background Black Numbers 500cc GP Classic 500cc Production Twins (up to 650cc) White Background Red Numbers Pre-njection Yellow Background Black Numbers Supersport Cup & Superbike Cup White Background Blue Numbers Supersport (600 4 Cylinder / Cylinder) White Background Black Numbers Superbike , Classic Sidecar 6. Motorcycles which do not comply with these rules may not pass scrutineering and or technical control. The decision of the Technical Steward will be final. Page 57 MCU Updated January 2013

3 MCU NUMBER PLATE, NUMBERS & FONTS GUDE / / / 50mm max ' '\ / 235m/ m1n 1 285mm min 15mm 160mm min 0 Page 58 MCU-Updated December 2010

4 Futura Heavy Futura Heavy ltalicy Univers Bold Univers Bold talic Oliver Med. Oliver Med. lta lic Franklin Gothic Franklin Gothic talic Page 59 MCU-Updated December 2010

5 NUMBER PLATES Aprilia 125 Production 125 GP Background: Black Production 250 GP 250 Classic Background: Green GP Classic - 400SS - Super Twins (up to 650) Background: Blue 10 Background: Yellow 500GP Classic - Production Twins (up to 650) 10 Pre-njection Number: Red 10 Supersport Number: Blue 10 Background: Yellow Supersport Cup Superbike Cup 10 Superbike (690 to Twins) Classic Page 60 MCU Updated January 2013