CHAPTER EIGHT Safety Gear (Road)

Size: px

Start display at page:

Download "CHAPTER EIGHT Safety Gear (Road)"

Lesley Ellis
6 years ago
Views:

1 CHAPTER EIGHT Safety Gear (Road) 8.1 Protective Clothing: Protective clothing may be examined by a competent official of MNZ prior to being used in each competition event. The minimum standard of protective clothing for events shall be as follows in this chapter. 8.1a Riders shall ensure that all protective clothing is, as a minimum standard, as listed in this chapter. Helmet details must be shown in the appropriate section in the rider s logbook. 8.1b Road Racing, Road Hill Climbs & Record Attempts: Safety Helmets - as per rule 8.2a Boots - as per rule 8.3a Clothing Back Protectors - Complete suits of leather or Kevlar - A certified back protector of composite material must be worn at all times. The standard for chest, shoulder & back protectors is EN1621 Gloves - Leather only is approved Eye Protection - as per rule 8.2j Chest Protectors From January 1st 2018, a certified chest protector of composite material must be worn at all times. The standard for Chest Protectors is EN c Super Motard: No competitor may practice, start or compete in any Super Motard Competition unless wearing the following: Helmet - Full Face or Motocross type as per rule 8.2a A one piece leather suit or a two piece must have concealed zip around waist. A back protector that is commercially manufactured. Gloves leather only, must have knuckle protection. Goggles or Visors as per rule 8.2j Motocross boots are approved. 8.1d Beach Racing: Safety Helmets - per rule 8.2a Boots - per rule 8.3a Jackets/Trousers - Leather, Kevlar, Nylon Motocross, Nylon/Motorcycle PVC wet weather gear Gloves - compulsory (motorcycle types only) Eye Protection - per rule 8.2j Body Armour - Commercially available Motorcycle Body Protection (Armour) that must include back protection 8.2 Helmets: At all MNZ sanctioned events approved design Motorcycle helmets will be worn when any rider or passenger is astride a machine which is in motion, whether these are 2, 3 or 4 wheeled vehicles, except for the official Ride By, which precedes the racing proper. This will take place at a slow and sedate speed behind the Start Car.

2 Any rider guilty of abusing this ride by with inappropriate riding style such as wheel stands and jumps, can, at the discretion of the Meeting Steward, be banned from competing at that meeting and no entry fee will be refunded 8.2a Competition Helmet Standards: All new helmets available in New Zealand are manufactured overseas. These are made to various standards. The following standards are acceptable for helmets for use in MNZ events; Road AS/NZS 1698:2006 Europe ECE 22-05, P Japan JIS T 8133:2007 (valid until ) JIS T 8133:2015 USA SNELL M2010 (valid until ) SNELL M2015 Only helmets of single shell construction are permitted for road racing events. Two piece or flip top helmets may be used for have-a-go or track introduction days. The NZ Ag Hat which is a Motorcycle Helmet complying with NZS8600 is NOT approved for ANY form of competitive motorcycling or for the transit of persons above the speed of 30kph. For International events the following standards apply: Europe ECE 22-05, P Japan JIS T 8133:2007 (valid until ) JIS T 8133:2015 USA SNELL M2010 (valid until ) SNELL M b All helmets manufactured, as evidenced by the manufacturers date of manufacture labelling, more than 10 years prior to the date of an event may be impounded under the terms of rule 8.2e. Where no date of manufacture is visible on the helmet the onus is on the competitor to prove that the helmet is less than 10 years old. 8.2c Helmets manufactured with standards other than those approved can only be used in competition after approval by MNZ. 8.2d Approval will be given upon receipt of a certificate from the Standards Association of New Zealand or a competent authority (recognised by MNZ) stating that such a standard meets one of the approved standards. 8.2e The Steward or his/her deputy is empowered to impound helmets or any safety equipment considered of insufficient standard or, if of approved design, in a damaged or unsound condition 8.2f Only helmets with a strap retaining system are permitted. 8.2g Each competitor will be required to prove good fit of his/her helmet.

3 8.2h All helmets, regardless of approved marks, must provide temple protection (commonly known as `Jet or `Open Face or `Full Face ). 8.2i Helmet peaks, if worn, must be of flexible material attached by press studs, straps, plastic screws, or tape. The peak must be capable of being torn from the helmet in the event of an accident. Helmets provided with metal screw attachments as original will be accepted, as well as metal screw replacements, provided the original mounting in the helmet is not modified in any way. 8.2j Face shields/visors must be of an approved flexible plastic or moulded material. Perspex face shields/visors are not permitted. Face shields/visors should be in the closed position; they may be opened sufficiently to aid ventilation but must protect eyes from flying objects during racing, qualifying & practice. Face shields/visors may be fully open during the end of session slow down lap, pit lane and off-track areas. 8.2k No helmet will be drilled, screwed or taped other than as per original manufacture, or helmet manufacturers instructions. The rider is required to provide proof that it is a helmet manufacturers instruction. 8.2l Polycarbonate helmets that have been painted are banned from use in competition. 8.2m Care of your helmet: YOUR POLYCARBONATE HELMET MUST NOT BE PAINTED. Make sure your helmet is not subject to solvents or fuel in storage or transport to and from and during meetings. Solvents of any kind must not be used to clean your helmet use soap and water. Any sticker should only be placed on a helmet by using the adhesive provided on the sticker. Do not place your helmet where it can be subject to sunlight, e.g. car windows, etc. MNZ strongly recommends, on advice from manufacturers, that you do not use a helmet for more than three years. Make sure your helmet is not dropped, or subjected to abuse in any way. If this happens have it re-examined by a qualified person or replace it. 8.2n Cameras: Camera mounts on any part of the motorcycle are subject to the approval of the machine examiner. No accessories of any type may be mounted to the helmet, goggles, or any part of the riders head protection. Aftermarket accessories mounted to OEM mount points are not allowed. OEM equipment is allowed.

5 8.3 Footwear: For speed events, boots must be well constructed, either all leather or leather uppers or leather substitute and solid rubber sole not less than 25cm from the inner sole to the top of the boot. 8.3a Road racing sidecar passengers are required to wear footwear to a minimum of gym type boots (i.e. affording ankle protection).

CHAPTER EIGHT Safety Gear (Road)

CHAPTER EIGHT Safety Gear (Road) 8.1 Protective Clothing: Protective clothing may be examined by a competent official of MNZ prior to being used in each competition event. The minimum standard of protective