FICHE DE RÉCEPTION UE PAR TYPE D'UN VÉHICULE ENTIER

Transcription

1 GRAND-DUCHÉ DE LUXEMBOURG Ministère du Développement durable et des Infrastructures Département des Transports L-2938 Luxembourg SOCIÉTÉ NATIONALE DE CERTIFICATION ET D'HOMOLOGATION s.à r.l. Registre de Commerce: B L-5201 Sandweiler Référence: Annexes: e13*168/2013*00060*01 - Rapport technique - Fiche de renseignements du constructeur Luxembourg, le 29 décembre 2016 FICHE DE RÉCEPTION UE PAR TYPE D'UN VÉHICULE ENTIER EU WHOLE-VEHICLE TYPE-APPROVAL CERTIFICATE Communication concernant: Communication concerning: - la réception UE par type d'un véhicule entier EU whole-vehicle type-approval - l extension de la réception UE par type d'un véhicule entier extension of EU whole-vehicle type-approval - le refus de la réception UE par type d un véhicule entier refusal of EU whole-vehicle type-approval pour un type de véhicule complet of a complete vehicle type - le retrait de la réception UE par type d un véhicule entier ) withdrawal of EU whole-vehicle type-approval en vertu du règlement (UE) N 168/2013, modifié en dernier lieu par le règlement (délégué de la Commission) (UE) N / complété par les règlements (UE) N 3/2014, N 44/2014 et N 134 /2014 modifiés en dernier lieu par le règlement (UE) N 2016/1824 with regard to Regulation (EU) N 168/2013, as last amended by (Commission Delegated) Regulation (EU) N / supplemented by regulations (EU) N 3/2014, N 44/2014 and N 134/2014 as last amended by regulation (EU) N 2016/1824 Numéro de réception UE par type: EU type-approval number: e13*168/2013*00060*01 Raison de l'extension: Reason for extension: refer to Annex I1 of technical report N 61JUA0001B Page 1 of 8

2 e13*168/2013*00060*01 SECTION I SECTION I 0.1. Marque (dénomination commerciale du constructeur): Make (trade name of manufacturer): 0.2. Type: Type: JIAYUAN JY7222-ZQR Variante(s): Variant(s): Version(s): Version(s): 0, Appellation(s) commerciale(s) (le cas échéant): Commercial name(s) (if available): 0.3. Catégorie, sous-catégorie et sous-souscatégorie du véhicule: Category, subcategory and sub-subcategory of vehicle: 0.4. Raison sociale et adresse du constructeur du véhicule complet: Company name and address of manufacturer of the complete vehicle: Nom(s) et adresse(s) de(s) usines d'assemblage: Name(s) and addresse(s) of assembly plant(s): Nom et adresse du mandataire du constructeur (le cas échéant): Name and address of manufacturer s authorised representative, if any: EIDOLA L7e L7e-C L7e-CP CHINA JIAYUAN POWER(HONG KONG) LIMITED Rooms /F, Manulife Provident Funds Place, 345 Nathan Road, KL, HONG KONG NANJING JIAYUAN SPECIAL ELECTRIC VEHICLES MANUFACTURE CO.,LTD. No.266 Xiongzhou South Road, Longchi Avenue, Luhe District, Nanjing City, Jiangsu Province, P.R.China JOVE INTERNATIONAL GROUP LIMITED Akara Bldg., 24 De Castro Street, Wickhams Cay I, Road Town Tortola, British Virgin Islands SECTION II SECTION II 1. Service technique responsable de la réalisation des essais: Technical service responsible for carrying out the tests:: ATE EL s.à r.l. 14, op Huefdreisch L-6871 Wecker 2. Date du rapport d'essais: Date of test report: Numéro du rapport d'essais: Number of test report: 61JUA0001B Page 2 of 8

3 e13*168/2013*00060*01 SECTION III SECTION III Le soussigné certifie l exactitude de la description, faite par le constructeur dans la fiche de renseignements jointe, du type de véhicule décrit ci-dessus, dont un ou plusieurs échantillons représentatifs, sélectionnés par l autorité compétente en matière de réception UE par type, ont été présentés en tant que prototypes du type de véhicule, et que les résultats d essais joints s appliquent au type de véhicule. The undersigned hereby certifies the accuracy of the manufacturer s description in the attached information document of the vehicle type described above, for which one or more representative samples, selected by the EU type-approval authority, have been submitted as prototypes of the vehicle type and that the attached test results apply to the vehicle type. 1. Le type de véhicule complet satisfait/ ne satisfait pas (1) à l ensemble des prescriptions pertinentes énumérées dans l annexe II du règlement (UE) N 168/2013. The complete vehicle type meets/does not meet (1) all relevant requirements as listed in Annex II to Regulation (EU) N 168/ Restrictions de validité: Restrictions of validity: 1.2. Dérogations accordées: Waivers applied: Raisons des dérogations: Reasons for the waivers: Autres exigences applicables: Alternative requirements: 2. La réception est accordée/étendue/refusée/ retirée: The approval is granted/extended/refused/withdrawn: 2.1. La réception est accordée conformément à l article 40 du règlement (UE) N 168/2013 et sa validité expire, par conséquent, le jj/mm/aaaa. The approval is granted in accordance with Article 40 of Regulation (EU) N 168/2013 and the validity of the approval is thus limited to dd/mm/yyyy. The complete vehicle type meets all relevant requirements as listed in Annex II to Regulation (EU) N 168/2013 not applicable not applicable not applicable not applicable the approval is extended not applicable Page 3 of 8

4 e13*168/2013*00060*01 Lieu: Place: Luxembourg Date: Date: 29 décembre 2016 Signature: Signature: Pour le Ministre du Développement durable et des Infrastructures Pour la SNCH Marco FELTES Inspecteur Principal 1 er en rang Claude LIESCH Directeur Pièces jointes: Attachments: NB: NB: - Dossier de réception Information package - Résultats d'essai Test results - Nom(s) et spécimen(s) de signature de la ou des personnes autorisées à signer les certificats de conformité et indication de leurs fonctions dans la société Name(s) and specimen(s) of the signature(s) of the person(s) authorised to sign certificates of conformity and a statement of their position in the company - Spécimen complété du certificat de conformité A completed specimen of the certificate of conformity not applicable Page 4 of 8

5 e13*168/2013*00060*01 Addendum à la fiche de réception UE par type Addendum to the EU type-approval certificate Liste des actes réglementaires aux prescriptions desquels le type de véhicule satisfait List of regulatory acts with which the type of vehicle complies refer to Annex S of technical report N 61JUA0001B Page 5 of 8

6 GRAND-DUCHÉ DE LUXEMBOURG Ministère du Développement durable et des Infrastructures Département des Transports L-2938 Luxembourg SOCIÉTÉ NATIONALE DE CERTIFICATION ET D'HOMOLOGATION s.à r.l. Registre de Commerce: B L-5201 Sandweiler Référence: Annexes: e13*168/2013*00060*01 - Rapport technique - Fiche de renseignements du constructeur Luxembourg, le 29 décembre 2016 Index du dossier de réception Index to type-approval report Numéro de réception UE par type: EC type-approval number: e13*168/2013*00060*01 Révision: Revision: 00 Marque de fabrique ou de commerce: Trade name or mark: Type: Type: 1. Procès-verbal d'essai: Test report: - Technical report: - Index of dossier: - General test report: - Detailed test reports: - List of regulatory acts: - General information: JIAYUAN JY7222-ZQR N 61JUA0001B Page(s) 1 & 2; Annex I1 - Page(s) 1 to 3; Annex T1 - Page(s) 1 to 18; Annex T2 - Page(s) 1 to 7; Annex T3 - Page(s) 1 to 4; Annex T4 - Page(s) 1 & 2; Annex T5 - Page(s) 1 to 4; Annex T6 - Page(s) 1 to 4; Annex T7 - Page(s) 1 & 2; Annex T8 - Page(s) 1 to 4; Annex T9 - Page(s) 1 & 2; Annex T10 - Page(s) 1 & 2; Annex T11 - Page(s) 1 & 2; Annex T12 - Page(s) 1; Annex T13 - Page(s) 1 & 2; Annex T14 - Page(s) 1 & 2; Annex T15 - Page(s) 1 to 17; Annex T16 - Page(s) 1 to 3; Annex T17 - Page(s) 1 & 2; Annex T18 - Page(s) 1; Annex S - Page(s) 1 to 3; Annex GI1 - Page(s) 1 to 6. Page 6 of 8

7 e13*168/2013*00060*01 2. Dossier du constructeur: Report of the manufacturer: N JY7222-ZQR-01 - Manufacturer s Information folder: refer to Annex I1 of technical report 3. Autres documents annexés: Other documents annexed: not applicable 4. Date de délivrance de la réception initiale: Date of issue of initial type approval: Date de la dernière délivrance de pages révisées: Date of last issue of revised pages: not applicable 6. Date de la dernière délivrance d'une réception révisée: Date of last extension: Page 7 of 8

8 GRAND-DUCHÉ DE LUXEMBOURG Ministère du Développement durable et des Infrastructures Département des Transports L-2938 Luxembourg SOCIÉTÉ NATIONALE DE CERTIFICATION ET D'HOMOLOGATION s.à r.l. Registre de Commerce: B L-5201 Sandweiler Référence: Annexes: e13*168/2013*00060*01 - Rapport Technique - Fiche de Renseignements du constructeur Luxembourg, le 29 décembre 2016 Annexe VIII Annex VIII Fiche des résultats d essais Test results sheet refer to Annex GI1 - Pages 3 to 6 & Annexes T1 to T18 of technical report N 61JUA0001B Page 8 of 8

9 Technical Report No. 61JUA0001B Type: JY7222-ZQR Tests and inspection concerning approval and market surveillance of two- or three-wheel vehicles and quadricycles according to the Regulation (EU) No 168/2013 of the Council of the European Communities including all amendments up to Commission Regulation (EU) 2016/1824 of Manufacturer: CHINA JIAYUAN POWER(HONG KONG) LIMITED Rooms /F, Manulife Provident Funds Place, 345 Nathan Road, KL, HONG KONG Type: JY7222-ZQR Type of Approval: Type Approval No.: Manufacturer: EU e13*168/2013*00060*01 CHINA JIAYUAN POWER(HONG KONG) LIMITED CONCLUSION: The tests and checks carried out have shown the compliance of the type described in this report and the attached annexes with the Regulation mentioned above. Shanghai, p.o. Mengting Xu Ingénieur Inspecteur Index see Annex I1 A reproduction of this document, except in full, is prohibited. ATE EL s.à r.l. 14, op Huefdreisch L-6871 Wecker Page 1 of 2 Tel.: Fax: admin@ateel.lu

10 Technical Report No. 61JUA0001B Type: JY7222-ZQR 1 Tests and inspection results Refer to Annex T* 2 Type and variants The tests and inspections carried out and described in this technical report have been selected in order to include the following variants and versions of the type and its equipments, as far as these are relevant for the topic of this report, into the judgement: As stated in Annex MID (Manufacturer's Information Document): Item - Version(s) Hand of drive Audible warning devices Lighting, light-signaling devices Tyres Remark 3.1 General None. 3.2 Extension 01 New tests have been run and new test results have been added. ATE EL s.à r.l. 14, op Huefdreisch L-6871 Wecker Page 2 of 2 Tel.: Fax: admin@ateel.lu

11 Annex I1 Page 1 Technical Report No. 61JUA0001B Type: JY7222-ZQR Compilation of Dossier No.: 61JUA0001 Extension 00 Technical report no.: 61JUA0001A page 1 to 2 Composition of Annex: I1: Index page 1 T1: General Test Report page 1 to 18 T2: Detailed Test Report page 1 to 7 T3: Detailed Test Report page 1 to 4 T4: Detailed Test Report page 1 T5: Detailed Test Report page 1 to 4 T6: Detailed Test Report page 1 to 4 T7: Detailed Test Report page 1 to 2 T8: Detailed Test Report page 1 to 3 T9: Detailed Test Report page 1 to 2 T10: Detailed Test Report page 1 to 2 T11: Detailed Test Report page 1 to 2 T12: Detailed Test Report page 1 T13: Detailed Test Report page 1 to 2 T14: Detailed Test Report page 1 to 2 T15: Detailed Test Report page 1 to 17 T16: Detailed Test Report page 1 to 3 T17: Detailed Test Report page 1 to 2 T18: Detailed Test Report page 1 S: List of Regulatory Acts page 1 to 3 GI1: General Information page 1 to 6 MID: Manufacturer's Information Document page 1 to 107 Index of the appendices to the Manufacturer's Information Document: page 1

12 Annex I1 Page 2 Technical Report No. 61JUA0001B Type: JY7222-ZQR Compilation of Dossier No.: 61JUA0001 Extension 01 Technical report no.: 61JUA0001B page 1 to 2 Composition of Annex: I1: Index page 1 to 3 T1: General Test Report page 1 to 18 T2: Detailed Test Report page 1 to 7 T3: Detailed Test Report page 1 to 4 T4: Detailed Test Report page 1 to 2 T5: Detailed Test Report page 1 to 4 T6: Detailed Test Report page 1 to 4 T7: Detailed Test Report page 1 to 2 T8: Detailed Test Report page 1 to 4 T9: Detailed Test Report page 1 to 2 T10: Detailed Test Report page 1 to 2 T11: Detailed Test Report page 1 to 2 T12: Detailed Test Report page 1 T13: Detailed Test Report page 1 to 2 T14: Detailed Test Report page 1 to 2 T15: Detailed Test Report page 1 to 17 T16: Detailed Test Report page 1 to 3 T17: Detailed Test Report page 1 to 2 T18: Detailed Test Report page 1 S: List of Regulatory Acts page 1 to 3 GI1: General Information page 1 to 6 MID: Manufacturer's Information Document page 1 to 137 Index of the appendices to the Manufacturer's Information Document: page 1

13 Annex I1 Page 3 Technical Report No. 61JUA0001B Type: JY7222-ZQR Compilation of Dossier No.: 61JUA0001 to be added: - item the new version 1 - item /30 minutes power - item Fuel consumption - item CO 2 emissions - item Energy consumption - item Electric range - item 6.1. the new horn - item the new lamps for version 1 - item the new tyres - new drawings: JY7222-ZQR-03-1, JY7222-ZQR-04-1, JY7222-ZQR-05-1, JY7222-ZQR-06-1, JY7222-ZQR-08-1, JY7222-ZQR , JY7222-ZQR , JY7222-ZQR-17-1, JY7222-ZQR-18-1, JY7222-ZQR-21-1, JY7222-ZQR-22-1, JY7222-ZQR-28-1, JY7222-ZQR , JY7222-ZQR , JY7222-ZQR-31-1, JY7222-ZQR-32-1, JY7222-ZQR , JY7222-ZQR , JY7222-ZQR-34-1, JY7222-ZQR-39-1, JY7222-ZQR-40-1, JY7222-ZQR-41-1, JY7222-ZQR-44-1, JY7222-ZQR-48-1 for version 1 to be updated: - the Regulation (EU) 2016/1824 and (EU) 2016/1825 to be changed: - the editorial arrangement

14 Annex T1 Page 1 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Test Report 1. Dates and resources 1.1 Date of receipt of the test item : Date of tests : Place of tests: Shanghai Motor Vehicle Inspection Center (SMVIC) Anting, Jiading District, Shanghai, China Motorcycle Test Technology Institute of China South Industries Group Corporation Xi'an, Shanxi, China 1.4 Testing site and testing equipment: All measuring and test equipment used to carry out the inspections are in accordance with ISO and the regulatory act(s) applied. 2. Test item identification The tests were conducted with test vehicle(s) which is representative of the vehicle type to be approved. The characteristics of the selected vehicle represent the worst case. Type: JY7222-ZQR Variant/Version: 0/0, 0/1 Description: Heavy quadri-mobile for passenger transport Category and Subcategory: L7e, L7e-CP VIN: R1JJE22A6G R1JJE27A3GJ Tests and inspections 3.1 Verification of separate regulatory acts test reports Conformity tests Applicability of regulatory acts The necessary tests and checks as required by each of the relevant regulatory acts have been performed Information package content The vehicle information folder meets the technical requirements of each of the relevant regulatory acts Vehicle inspections The relevant installation checks in respect of separate technical units have been performed. All necessary checks in respect of the presence of the devices required in Annex II to Regulation (EU) No 168/2013 have been performed.

15 Annex T1 Page 2 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Test Report 4. Tests and inspections according to the regulatory acts for vehicles of category L7e-CP Summary table No. A (EU) No 168/2013 Article Subject Category applicable Requirements fulfilled (EU) No 134/2014 as amended by (EU) 2016/1824 ENVIRONMENTAL AND PROPULSION UNIT PERFORMANCE REQUIREMENTS (EPPR) Tailpipe emissions after cold start Yes No N.A. Yes No N.A. Yes Yes Tailpipe emissions at (increased idle)/ free No No acceleration test N.A. N.A. 23&24 Emissions crank-case gases Evaporative emissions Durability of pollution-control devices Measurement of CO 2 emissions, fuel consumption, electric energy consumption and electric range determination Environmental on-board diagnosis (OBD) tests Vehicle propulsion family definition Yes No N.A. Yes No N.A. Yes No N.A. Yes No N.A. Yes No N.A. Yes No N.A. Yes No N.A. Yes No N.A. Yes No N.A. Yes No N.A. Yes No N.A. Yes No N.A. Yes Yes Procedures and technical requirements on No No maximum vehicle design speed N.A. N.A. Procedures and technical requirements on maximum torque, maximum continuous total power and maximum peak power Permissible sound level Yes No N.A. Yes No N.A. Yes No N.A. Yes No N.A. Item No. in test report 4.A1. 4.A2. 4.A3.

16 Annex T1 Page 3 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Test Report B (EU) No 3/2014 as amended by (EU) 2016/1824 VEHICLE FUNCTIONAL SAFETY REQUIREMENTS 22 Audible warning devices Braking, including anti-lock and combined brake systems Electrical safety Manufacturer declaration requirements regarding endurance testing of functional safety-critical systems, parts and equipment Front and rear protective structures Glazing, windscreen wipers and washers, and defrosting and demisting systems Driver-operated controls including identification of controls, tell-tales and indicators Installation of lighting and light- signalling devices, including automatic switching of lighting Rearward visibility Rollover protective structure (ROPS) Safety-belt anchorages and safety- belts Seating positions (saddles and seats) Steer-ability, cornering properties and turn-ability Installation of tyres Vehicle maximum speed limitation plate and its location on the vehicle Vehicle occupant protection, including interior fittings and vehicle doors Maximum continuous total power and/or maximum vehicle speed limitation by design Requirements on vehicle structure integrity Yes No N.A. Yes No Yes N.A. Yes No N.A. Yes No If Yes No If Yes No N.A. Yes No Yes No N.A. Yes No N.A. Yes No If Yes No Yes No Yes No Yes No If Yes No If Yes No If Yes No Yes No N.A. Yes No Yes N.A. Yes No N.A. Yes No N.A. Yes No N.A. Yes No N.A. Yes No Yes No N.A. Yes No N.A. Yes No N.A. Yes No Yes No Yes No Yes No N.A. Yes No N.A. Yes No N.A. Yes No 4.B1. 4.B2. 4.B3. 4.B4. 4.B5. 4.B6. 4.B7. 4.B8. 4.B9. 4.B10. 4.B11. 4.B12. 4.B13. 4.B14. 4.B15. 4.B16. 4.B17. 4.B18.

17 Annex T1 Page 4 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Test Report C (EU) No 44/2014 as amended by (EU) 2016/1824 VEHICLE CONSTRUCTION AND GENERAL TYPE-APPROVAL REQUIREMENTS 1 20 Yes Yes Powertrain tampering prevention measures (antitampering) No No N.A. N.A. 4.C Arrangements for type-approval procedures Yes Yes No No 4.C Conformity of production Yes Yes No No 4.C3. Yes Yes 4 18 Coupling devices and attachments No If No N.A. 4.C Devices to prevent unauthorised use Yes Yes No No 4.C Electromagnetic compatibility (EMC) Yes Yes No No 4.C External projections Yes Yes No No 4.C7. Yes Yes 8 18 Fuel storage No If Yes No N.A. Yes 4.C Load platforms No If No N.A. 4.C Masses and dimensions Yes Yes No No 4.C Yes Yes On-board diagnostics (OBD) functional No No requirements N.A. N.A. 4.C11. Yes Yes Passenger handholds and footrests No If No N.A. 4.C Registration plate space Yes Yes No No 4.C Access to repair and maintenance information Yes Yes No No 4.C14. Yes Yes Stands No No 4.C15. N.A. N.A. D (EU) No 901/2014 as amended by (EU) 2016/1825 ADMINISTRATIVE REQUIREMENTS 1 39 Statutory plate and EU type-approval mark Yes Yes No No 4.D1. Remark: If means if fitted. If the system, component or separate technical unit referred to in the table is fitted on the vehicle, because it is mandatory only for some of the vehicles falling into this category; Equally, if the vehicle manufacturer chooses to equip the vehicle with the system, component or separate technical unit on a voluntary basis, it shall fulfil the requirements laid down in the delegated and implementing acts.

18 Annex T1 Page 5 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Test Report 4.A1. 4.A1.1. (EU) No 134/2014 Annex II; Tailpipe emissions after cold start (EU) No 134/2014 Annex III; Tailpipe emissions at (increased idle)/ free acceleration test (EU) No 134/2014 Annex IV; Emissions crank-case gases (EU) No 134/2014 Annex V; Evaporative emissions (EU) No 134/2014 Annex VI; Durability of pollution-control devices (EU) No 134/2014 Annex VII; Measurement of electric energy consumption and electric range determination (EU) No 134/2014 Annex VIII; Environmental on-board diagnosis (OBD) tests (EU) No 134/2014 Annex XI; Vehicle propulsion family definition Tests and inspections The tests have been carried out in accordance with the Euro 4 requirements of Annex II, III, IV, V, VI, VII, VIII, XI to Regulation (EU) No 134/ A1.2. Test results For detailed test results see Annex T2. 4.A2. 4.A2.1. (EU) No 134/2014 Annex X; Procedures and technical requirements on maximum vehicle design speed, maximum torque, maximum continuous total power and maximum peak power Tests and inspections The tests have been carried out in accordance with the requirements of Annex X to Regulation (EU) No 134/2014 and UNECE regulation No A2.2. Test results For detailed test results see Annex T3. 4.A3. (EU) No 134/2014 Annex IX; Permissible sound level Not applicable, the vehicle is propelled by electric motor. Confirmation The tests and inspections have shown the conformity of the vehicle type, described in this report and its annexes, with Regulation (EU) No 134/2014 including all amendments up to the Regulation (EU) 2016/1824 of 14/07/2016.

19 Annex T1 Page 6 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Test Report 4.B1. 4.B1.1. (EU) No 3/2014 Annex II; Audible warning devices Tests and inspections The tests have been carried out in accordance with the requirements of UNECE regulation No B1.2. Test results For detailed test results see Annex T4. 4.B2. 4.B2.1. (EU) No 3/2014 Annex III; Braking, including anti-lock and combined brake systems Tests and inspections The tests have been carried out in accordance with the requirements of UNECE regulation No B2.2. Test results For detailed test results see Annex T5. 4.B3. 4.B.3.1. (EU) No 3/2014 Annex IV; Electrical safety Tests and inspections The tests and inspections have been carried out in accordance with the requirements of Annex IV to Regulation (EU) No 3/ B General requirements concerning the protection against electrical shock and electrical safety applying to high voltage buses under conditions where they are not connected to external high voltage power supplies The requirements of point 2 of Annex IV to Regulation (EU) No 3/2014 are fulfilled. 4.B Requirements concerning the REESS The requirements of point 3 of Annex IV to Regulation (EU) No 3/2014 are fulfilled. 4.B In-use safety requirements The requirements of point 4 of Annex IV to Regulation (EU) No 3/2014 are fulfilled. 4.B Enhanced functional safety requirements on electrical safety of Annex VIII to Regulation (EU) No 168/2013 are fulfilled.

20 Annex T1 Page 7 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Test Report 4.B4. 4.B4.1. (EU) No 3/2014 Annex V; Manufacturer declaration requirements regarding endurance testing of functional safety-critical systems, parts and equipment Tests and inspections The tests and inspections have been carried out in accordance with the requirements of Annex V to Regulation (EU) No 3/ B General requirements The manufacturer s statement on endurance of functional safety-critical systems, parts and equipment as referred to in Article 22(2) of Regulation (EU) No 168/2013 and set out in Annex II to Regulation (EU) No 901/2014 is provided. Enhanced functional safety requirements of Annex VIII to Regulation (EU) No 168/2013 are fulfilled. 4.B5. (EU) No 3/2014 Annex VI; Front and rear protective structures Not applicable. 4.B6. 4.B6.1. (EU) No 3/2014 Annex VII; Glazing, windscreen wipers and washers, and defrosting and demisting systems Tests and inspections The tests and inspections have been carried out in accordance with the requirements of Annex VII to Regulation (EU) No 3/2014. The vehicle has bodywork and there are structural elements such as A-pillars or a rigid frame around the windscreen, in combination with other elements such as side doors/side windows, back door/back window and a roof creating an enclosed or partly enclosed compartment. 4.B Requirements for the approval of a type of vehicle with regard to glazing The tests have been carried out in accordance with the requirements of Annex VII to Regulation (EU) No 3/2014 and Annex 21 of UNECE regulation No 43. For detailed test results see Annex T6. 4.B Requirements for the approval of a type of vehicle with regard to windscreen wipers and washers The tests and inspections have been carried out in accordance with the requirements of Annex VII to Regulation (EU) No 3/2014. For detailed test results see Annex T6.

21 Annex T1 Page 8 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Test Report 4.B Requirements for the approval of a type of vehicle with regard to defrosting and demisting systems The tests have been carried out in accordance with the requirements of Annex VII to Regulation (EU) No 3/2014 and UNECE regulation No 122. For detailed test results see Annex T6. 4.B7. 4.B7.1. (EU) No 3/2014 Annex VIII; Driver-operated controls including identification of controls, tell-tales and indicators Tests and inspections The tests and inspections have been carried out in accordance with the requirements of Annex VIII to Regulation (EU) No 3/ B Identification of controls, tell-tales and indicators The tests have been carried out in accordance with the requirements of UNECE regulation No 121. For detailed test results see Annex T7. 4.B Speedometer and odometer The tests have been carried out in accordance with the requirements of UNECE regulation No 39. For detailed test results see Annex T7. 4.B8. 4.B8.1. (EU) No 3/2014 Annex IX; Installation of lighting and light- signalling devices, including automatic switching of lighting Tests and inspections The tests and inspections have been carried out in accordance with the requirements of Annex IX to Regulation (EU) No 3/ B8.2. Test results Enhanced functional safety requirements on improvement of vehicle and rider visibility by automatic switching-on of lighting of Annex VIII to Regulation (EU) No 168/2013 are fulfilled. Special requirements of point to of Annex IX to Regulation (EU) No 3/2014 are fulfilled. For detailed test results see Annex T8.

22 Annex T1 Page 9 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Test Report 4.B9. 4.B9.1. (EU) No 3/2014 Annex X; Rearward visibility Tests and inspections The tests have been carried out in accordance with the requirements of UNECE regulation No B9.2. Test results For detailed test results see Annex T9. 4.B10. (EU) No 3/2014 Annex XI; Rollover protective structure (ROPS) Not applicable. 4.B11. 4.B11.1. (EU) No 3/2014 Annex XII; Safety-belt anchorages and safety- belts Tests and inspections The tests and inspections have been carried out in accordance with the requirements of Annex XII to Regulation (EU) No 3/ B11.2. Test results Enhanced functional safety requirements on safety belt anchorages and safety belts of Annex VIII to Regulation (EU) No 168/2013 are fulfilled. For detailed test results see Annex T10. 4.B12. 4.B12.1. (EU) No 3/2014 Annex XIII; Seating positions (saddles and seats) Tests and inspections The tests and inspections have been carried out in accordance with the requirements of Annex XIII to Regulation (EU) No 3/2014. The vehicle has bodywork and there are structural elements such as A-pillars or a rigid frame around the windscreen, in combination with other elements such as side doors/side windows, back door/back window and a roof creating an enclosed or partly enclosed compartment. 4.B General specifications The vehicle is fitted with two seats with seat backs. All seating positions are forward-facing. The height of the R-point of the seating position of the driver or rider is more than 400 mm as measured from the ground surface. The requirements of point 1 of Annex XIII to Regulation (EU) No 3/2014 are fulfilled.

23 Annex T1 Page 10 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Test Report 4.B Seat tests Not applicable. The seats are not fitted with safety belt anchorage points and/or safety belts. 4.B Child restraint systems Not applicable. The vehicle are not fitted with child restraint systems. 4.B13. 4.B13.1. (EU) No 3/2014 Annex XIV; Steer-ability, cornering properties and turn-ability Tests and inspections The tests and inspections have been carried out in accordance with the requirements of Annex XIV to Regulation (EU) No 3/2014. The vehicle has bodywork and there are structural elements such as A-pillars or a rigid frame around the windscreen, in combination with other elements such as side doors/side windows, back door/back window and a roof creating an enclosed or partly enclosed compartment. The vehicle is not equipped with assistance steering systems. 4.B13.2. Test results Enhanced functional safety requirements on safe cornering on hard-surfaced roads of Annex VIII to Regulation (EU) No 168/2013 are fulfilled. For detailed test results see Annex T11. 4.B14. 4.B14.1. (EU) No 3/2014 Annex XV; Installation of tyres Tests and inspections The tests and inspections have been carried out in accordance with the requirements of Annex XV to Regulation (EU) No 3/ B14.2. Test results For detailed test results see Annex T12. 4.B15. (EU) No 3/2014 Annex XVI; Vehicle maximum speed limitation plate and its location on the vehicle Not applicable.

24 Annex T1 Page 11 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Test Report 4.B16. 4.B16.1. (EU) No 3/2014 Annex XVII; Vehicle occupant protection, including interior fittings and vehicle doors Tests and inspections The tests and inspections have been carried out in accordance with the requirements of Annex XVII to Regulation (EU) No 3/2014. The vehicle has bodywork and there are structural elements such as A-pillars or a rigid frame around the windscreen, in combination with other elements such as side doors/side windows, back door/back window and a roof creating an enclosed or partly enclosed compartment. 4.B16.2. Test results Enhanced functional safety requirements on vehicle occupant protection including interior fittings and vehicle doors of Annex XVII to Regulation (EU) No 168/2013 are fulfilled. For detailed test results see Annex T13. 4.B17. 4.B17.1. (EU) No 3/2014 Annex XVIII; Maximum continuous total power and/or maximum vehicle speed limitation by design Tests and inspections Maximum vehicle speed and/or maximum power shall be limited by means of two or more of the following, for vehicles which are propelled by means of one or more electric motors, including pure and hybrid electric vehicles: (a) reduction of the maximum power output of one or more electric motors based on the vehicle or rotation speed as sensed internally to the electric motor: Yes: No: (b) reduction of the maximum power output of one or more electric motors based on the actual vehicle speed as sensed fully externally to the electric motor: Yes: No: (c) physical vehicle speed limitation by means of internal or external components such as a maximum achievable revolution speed of an electric motor: Yes: No:

25 Annex T1 Page 12 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Test Report 4.B18. 4.B18.1. (EU) No 3/2014 Annex XIX; Requirements on vehicle structure integrity Tests and inspections The manufacturer s statement on vehicle structure integrity as referred to in Article 22(5) of Regulation (EU) No 168/2013 and set out in Annex II to Regulation (EU) No 901/2014 is provided. Enhanced functional safety requirements on vehicle structure integrity of Annex VIII to Regulation (EU) No 168/2013 are fulfilled. Confirmation The tests and inspections have shown the conformity of the vehicle type, described in this report and its annexes, with Regulation (EU) No 3/2014 including all amendments up to the Regulation (EU) 2016/1824 of 14/07/2016.

26 Annex T1 Page 13 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Test Report 4.C1. 4.C C (EU) No 44/2014 Annex II; Powertrain tampering prevention measures (anti-tampering) Tests and inspections General specifications The manufacturer s declaration on powertrain tampering prevention measures (anti-tampering) as referred to in Article 20(2) of Regulation (EU) No 168/2013 and in points 2.2., 2.6. and 5.2. of Annex II to Regulation (EU) No 44/2014 and set out in Appendix 25 of Annex I to Regulation (EU) No 901/2014 is provided. The requirements of point 2 of Annex II to Regulation (EU) No 44/2014 are fulfilled. 4.C Additional specific requirements for other (sub)categories of L7e-C The requirements of point 5 of Annex II to Regulation (EU) No 44/2014 are fulfilled. 4.C2. 4.C C (EU) No 44/2014 Annex III; Arrangements for type-approval procedures Tests and inspections Type-approval process Single-step type-approval is chosen by manufacturer Yes: No: Step-by-step type-approval is chosen by manufacturer Yes: No: Mixed step type-approval is chosen by manufacturer Yes: No: 4.C Combination of technical specifications The number of vehicles to be is sufficient to permit the proper check of the various combinations to be type-approved according to the vehicle criteria. 4.C Provisions regarding conversion of subcategories (L3e/L4e)-A2 and (L3e/L4e)-A3 motorcycles Not applicable. 4.C Procedures to be followed during multi-stage EU type-approval Not applicable. 4.C Specific conditions required of virtual testing methods and regulatory acts for which virtual and/or self-testing methods may be used by a manufacturer or a technical service Not applicable.

27 Annex T1 Page 14 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Test Report 4.C3. 4.C C (EU) No 44/2014 Annex IV; Conformity of production Tests and inspections Initial assessment The manufacturer s certification complies with the international EN ISO 9001:2008. The requirements of point 1 of Annex IV to Regulation (EU) No 44/2014 are fulfilled. 4.C Product conformity arrangements Existence of procedures for effective control of the conformity of product. The requirements of point 2 of Annex IV to Regulation (EU) No 44/2014 are fulfilled. 4.C4. (EU) No 44/2014 Annex V; Coupling devices and attachments Not applicable. 4.C5. 4.C5.1. (EU) No 44/2014 Annex VI; Devices to prevent unauthorised use Tests and inspections The tests have been carried out in accordance with the requirements of UNECE regulation No C5.2. Test results For detailed test results see Annex T14. 4.C6. 4.C6.1. (EU) No 44/2014 Annex VII; Electromagnetic compatibility (EMC) Tests and inspections The tests have been carried out in accordance with the requirements of UNECE regulation No C6.2. Test results For detailed test results see Annex T15.

28 Annex T1 Page 15 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Test Report 4.C7. 4.C7.1. (EU) No 44/2014 Annex VIII; External projections Tests and inspections The tests and inspections have been carried out in accordance with the requirements of Annex VIII to Regulation (EU) No 44/2014 and UNECE regulation No C7.2. Test results For detailed test results see Annex T16. 4.C8. (EU) No 44/2014 Annex IX; Fuel storage Not applicable, the vehicle is powered by battery. 4.C9. (EU) No 44/2014 Annex X; Load platforms Not applicable. 4.C10. 4.C10.1. (EU) No 44/2014 Annex XI; Masses and dimensions Tests and inspections The tests and inspections have been carried out in accordance with the requirements of Annex XI to Regulation (EU) No 44/ C10.2. Test results For detailed test results see Annex T17. 4.C11. (EU) No 44/2014 Annex XII; On-board diagnostics (OBD) functional requirements Not applicable. 4.C12. (EU) No 44/2014 Annex XIII; Passenger handholds and footrests Not applicable.

29 Annex T1 Page 16 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Test Report 4.C13. 4.C13.1. (EU) No 44/2014 Annex XIV; Registration plate space Tests and inspections The tests and inspections have been carried out in accordance with the requirements of Annex XIV to Regulation (EU) No 44/ C13.2. Test results For detailed test results see Annex T18. 4.C14. 4.C C (EU) No 44/2014 Annex XV; Access to repair and maintenance information Tests and inspections The manufacturer s certificate on access to vehicle OBD stage I and vehicle repair and maintenance information The manufacturer s certificate providing proof of compliance to the type-approval authority on access to vehicle on-board diagnostic (OBD) systems and to vehicle repair and maintenance information as referred to in Article 57(8) of Regulation (EU) No 168/2013 and set out in Annex III to Regulation (EU) No 901/2014 is provided. 4.C Access to vehicle OBD and vehicle repair and maintenance information Address of website for access to vehicle repair and maintenance information:. Date from which it is available: Terms and conditions of access (i.e., duration of access, price of access on a hourly, daily, monthly, annual and per-transaction basis): Format of vehicle repair and maintenance information accessible through website: 6 months from the date of type approval according to point 3 of Annex XV to this Regulation according to Appendix 1 of Annex XV to this Regulation The technical requirements in Appendix 1 of Annex IV to Regulation (EU) No 44/2014 regarding access to vehicle OBD and vehicle repair and maintenance information are fulfilled.

30 Annex T1 Page 17 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Test Report 4.C Service parts, diagnostic tools and test equipment The manufacturer makes the necessary information in the context of Article 57(6) of Regulation (EU) No 168/2013 available to interested parties on the basis of individual arrangements to which the principle of Article 59 of Regulation (EU) No 168/2013 apply and to provide contact details on its website. 4.C Multi-stage type-approval Not applicable. 4.C Small volume manufacturers Not applicable. 4.C Carry-over systems Not applicable. 4.C15. (EU) No 44/2014 Annex XVI; Stands Not applicable. Confirmation The tests and inspections have shown the conformity of the vehicle type, described in this report and its annexes, with Regulation (EU) No 44/2014 of 21/11/2013.

31 Annex T1 Page 18 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Test Report 4.D1. 4.D1.1. (EU) No 901/2014 Annex V; Statutory plate and EU type-approval mark Tests and inspections The tests and inspections have been carried out in accordance with the requirements of Annex V to Regulation (EU) No 901/ D General requirements for vehicle marking The requirements of point 1 of Annex V to Regulation (EU) No 901/2014 are fulfilled. 4.D Statutory plate The requirements of point 2 of Annex V to Regulation (EU) No 901/2014 are fulfilled. 4.D Requirements for the VIN The requirements of point 3 of Annex V to Regulation (EU) No 901/2014 are fulfilled. 4.D Marking requirements for a multi-stage approval Not applicable. Confirmation The tests and inspections have shown the conformity of the vehicle type, described in this report and its annexes, with Regulation (EU) No 901/2014 including all amendments up to the Regulation (EU) 2016/1825 of 06/09/2016.

32 Annex T2 Page 1 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report (EU) No 134/2014 Annex II; Tailpipe emissions after cold start (EU) No 134/2014 Annex III; Tailpipe emissions at (increased idle)/ free acceleration test (EU) No 134/2014 Annex IV; Emissions crank-case gases (EU) No 134/2014 Annex V; Evaporative emissions (EU) No 134/2014 Annex VI; Durability of pollution-control devices (EU) No 134/2014 Annex VII; Measurement of electric energy consumption and electric range determination (EU) No 134/2014 Annex VIII; Environmental on-board diagnosis (OBD) tests (EU) No 134/2014 Annex XI; Vehicle propulsion family definition [ ] Numbering according to the item "(A) Environmental and propulsion unit performance" of Annex VIII of Regulation (EU) No 901/2014 as last amended by (EU) 2016/ Test item identification The tests were conducted with a test vehicle which is representative of the vehicle type to be approved. The characteristics of the selected vehicle represent the worst case. 2. Vehicle data 2.1. Vehicle description - Vehicle: JY7222-ZQR - Variant(s)/Version(s): 0/0 - VIN: R1JJE22A6G Description of propulsion, propulsion family and drive-train of test vehicle(s) [ ] Propulsion family: Not applicable Electric motor Drive-train - Type designation: JYD Maximum continuous power: kw Battery capacity[ah]: Battery voltage[v]: Transmission - Drive wheels: Rear wheel - Type: Automatic - Numbers of gears: Forward+Reverse

33 Annex T2 Page 2 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report - Gear ratios: Gear Forward Type approved vehicle (TA) Primary ratio Secondary ratio Final drive ratio Tested vehicle (T) Type approved vehicle (TA) Tested vehicle (T) Type approved vehicle (TA) Tested vehicle (T) Test vehicle tyre Axle Tyre make Tyre dimension Approval number Inflation pressure [kpa] Front WANDA 145/70R12 E4-30R Rear WANDA 145/70R12 E4-30R Range of tyre size: dynamic rolling circumference [mm] Type approval tyre from 1549 to 1549 Tested tyre Total gear ratios (Speed in km/h per engine 1000 min -1 ) Gear 1 Vehicle speed range V, covered by the test vehicle [km/h] Tested From To Vehicle speed range V, to be covered by all possible versions [km/h] From To Maximum speed[km/h]: Test vehicle equipment: Electric motor control Make JIAYUAN unit: Type JYK Stop-start system fitted: Yes/No Mass of the vehicle at the time of testing[kg]: (1) (2) m k m ref Front Rear Total (1): Mass in running order and propulsion batteries plus optional equipment (2): Mass(1) plus mass of driver.

34 Annex T2 Page 3 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report 2.3. Environmental step of test vehicle: Not applicable [ ] 2.4. Description of emission test bench(es), specifications and settings: [ ] Gas sampling device: Make Not applicable Type Not applicable Gas analysing device: Make Not applicable Type Not applicable 2.5. Chassis/engine dynamometer(s) specifications: [ ] Chassis: Make SHIN WELL TOKKI Type ACD-075B106MC 2.6. Inertia (reference) mass and running resistance settings for single/dual roll chassis dynamometer: [ ] Equivalent inertia mass Rolling resistance of front wheel a Aero drag coefficient b [kg] [N] [N/(km/h) 2 ] Comprehensive report of road test results for the determination of test bench settings, [ ] including coast down times for single/dual roll chassis dynamometer: Not applicable 2.8. Applicable test type I driving schedule: ECE R40 without EUDC [ ] 2.9. Description gearshift prescriptions for environmental testing: [ ] See Annex T2, item Test conditions Test type VII - Ambient Temperature[ C] : 25 - Relative Humidity[%]: 49 - Atmospheric pressure[kpa]: 96.8

35 Annex T2 Page 4 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report 4. Test results 4.1. Test Type I requirements: tailpipe emissions after cold start: Not applicable [ ] 4.2. Test type II requirements: tailpipe emissions at [ ] (increased idle)/free acceleration: Not applicable 4.3. Test type III requirements: emissions of crank-case gases: Not applicable [ ] 4.4. Type IV test requirements: evaporative emissions: Not applicable [ ] 4.5. Test type V requirements: durability of pollution-control devices: Not applicable [ ] 4.6. Test type VI has not been assigned; consequently there are no results to be submitted [ ] 4.7. Test type VII requirements: measurement of CO 2 emissions, fuel consumption, [ ] electric energy consumption and electric range determination passed Details of test vehicle(s), its powertrain and pollution-control [ ] devices explicitly documented and listed, emission test laboratory equipment and settings, if different from data reported under test type I: Not applicable Documentation added according to UNECE [ ] Regulation No 101: No The vehicle manufacturer has ensured that the [ ] CO 2 emissions, fuel consumption, electric energy consumption and electric range data are provided to the buyer of the vehicle at the time of purchase of a new vehicle: A completed specimen of the test type VII result [ ] format used to inform the buyer of the new vehicle is added to the information document: Yes Yes Type VII test results, where applicable and for [ ] each reference fuel tested: Not applicable Test type VII test results CO 2 emissions, fuel consumption Not applicable [ ]

36 Annex T2 Page 5 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Electric energy consumption and electric range: [ ] Test Type VII result table for pure electric propulsion or not-externally-chargeable (NOVC) propulsions equipped with an electric motor for propulsion Variant/Version: 0/0 Electric energy consumption Electric range [Wh/km] [km] Measured Declared Measured Declared Pure electric powertrain Difference between Test Type VII Test Results and Manufacturer s 0.00% 0.00% declared values[%] For L2e, L5e-B, L6e-B and L7e vehicles equipped with a passenger compartment; the maximum electrical consumption owing to auxiliary heating such as heating systems for the passenger compartment/seats/other: 1.2 kw 4.8. Test type VIII requirements: environmental on-board diagnostic (OBD) Not applicable [ ] 4.9. Test type IX requirements: sound level Not applicable [ ] Propulsion unit performance test results [ ] Propulsion unit performance data to be provided to [ ] measure/determine the maximum vehicle design speed: Details of hardware and software of test vehicle(s), fitted components and [ ] accessories referred to in Annex X to Commission Delegated Regulation (EU) No 134/2014, Any deviations by test vehicle(s) from data provided in information document, Annex I: If yes, please provide list with deviations relevant for measuring the maximum vehicle design speed and gear in which it was reached : Not applicable Test mass in running order: mass plus rider/driver: 772 kg [ ] Test fuel specifications: Not applicable [ ] Powertrain lubricant specifications: Not applicable [ ] Atmospheric pressure: kpa [ ] Relative humidity: 40% [ ]

37 Annex T2 Page 6 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Ambient temperature: 303 K [ ] Wind speed and direction on test track: 0.5 m/s [ ] Test track condition (temperature, level of moisture etc.): 313 K, dry and flat [ ] Maximum vehicle design speed measured and gear in which it is reached: 77 km/h [ ] in gear no: Forward gear Maximum vehicle design speed [ ] Exemption L3e-A3 and L4e-A3 vehicles; maximum vehicle design [ ] speed declared by manufacturer: Not applicable Propulsion unit performance data to be provided to measure/determine [ ] the torque and power of the propulsion on the engine dynamometer Details of propulsion(s) hardware and software tested, test [ ] equipment and settings relevant for propulsion unit performance measurements on engine dynamometer tests: List of components and part numbers/markings relevant for propulsion [ ] unit performance measurement on engine dynamometer, referred to in Annex X to Commission Delegated Regulation (EU) No 134/2014: See Annex T3 See Annex T Test fuel: Not applicable [ ] Powertrain lubricant specifications: Not applicable [ ] Atmospheric pressure: kpa [ ] Relative humidity: 50% [ ] Ambient temperature: 295 K [ ] Correction factor for reference atmospheric conditions α1: Not applicable [ ] Correction factor for the efficiency of the transmission α2: Not applicable [ ] Engine cooling temperature: Not applicable [ ] Oil temperature at measuring point: Not applicable [ ] Exhaust temperature Not applicable [ ]

38 Annex T2 Page 7 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report The manufacturer shall indicate the propulsion unit performance [ ] test results below: Maximum permitted combustion engine/electric [ ] motor/propulsion rotation speed: 5000 min Maximum net power combustion engine: Not applicable [ ] Maximum net torque combustion engine: Not applicable [ ] Maximum continuous-rated power electric motor: 7.5 kw at 3050 min -1 [ ] Maximum continuous-rated torque electric motor: 22.8 Nm at 3050 min -1 [ ] Maximum current e-motor at maximum continuous-rated power: A [ ] Maximum continuous total power for propulsion(s): Not applicable [ ] Maximum continuous total torque for propulsion(s): Not applicable [ ] Maximum peak power for propulsion(s): 24.0 kw at 3500 min -1 [ ] Power/mass in running order ratio: Not applicable [ ] Specific fuel consumption, g/kwh at maximum net power and power: Not applicable [ ] Propulsion unit performance sweep graphs of total power [ ] and torque vs. engine speed (1 200 rpm to propulsion speed governor rpm, step 400 rpm). Secondary variables: spark angle, A/F ratio and mass air-flow (measured or calculated): Not applicable Maximum speed of vehicle and gear in which it is reached: 77 km/h [ ] (only for subcategories: L1e, L2e, L6e, L7e-B1, L7e-C) Maximum declared vehicle speed: Not applicable [ ] (only for subcategories without maximum vehicle speed limitation: L3e, L4e, L5e, L7e-A and L7e-B2) TEST PASSED

39 Annex T3 Page 1 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report (EU) No 134/2014 Annex X; Procedures and technical requirements on maximum vehicle design speed, maximum torque, maximum continuous total power and maximum peak power 1. Test item identification The tests were conducted with a test motor which is representative of the motor type to be approved. The tests were conducted with a test vehicle which is representative of the vehicle type to be approved. The characteristics of the selected vehicle represent the worst case. 2. Vehicle data 2.1. Vehicle description - Vehicle: JY7222-ZQR - Variant(s)/Version(s): 0/0 - VIN: R1JJE22A6G Description of propulsion and drive-train of test vehicle(s) Electric motor - Type designation: JYD Maximum continuous power: kw Transmission - Type: Automatic - Numbers of gears: Forward+Reverse - Gear ratios: Gear Primary ratio Secondary ratio Final drive ratio Forward

40 Annex T3 Page 2 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report 2.3. Test vehicle equipment Electric motor control Make JIAYUAN unit: Type JYK Maximum vehicle design speed 3.1. Mass of the vehicle at the time of testing [kg]: Mass in running order and propulsion batteries plus driver Front Rear Total Test fuel specifications Not applicable Powertrain lubricant specifications Not applicable Atmospheric pressure kpa 3.5. Relative humidity 40% 3.6. Ambient temperature 303 K 3.7. Wind speed and direction on test track 0.5 m/s 3.8. Test track condition (temperature, level of moisture etc.) Temperature: 313 K, dry and flat Test result Variants/ versions Declared max. Speed[km/h] Measured max. speed[km/h] Tolerance min.[km/h] Tolerance max. [km/h] 0/

41 Annex T3 Page 3 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report 4. Maximum torque and maximum continuous rated power 4.1. Characteristics of the dynamometer Make: Type: Konzon ZC300KC 4.2. Accessories Accessories to be fitted The accessories needed for operation of the motor in the application in question is located on the test bench as far as possible in the positions that they would occupy for that application Accessories to be removed Not applicable Setting conditions The conditions applying to settings during the tests to determine maximum torque and maximum continuous rated power are set out in UNECE regulation No Detailed results of measurements Maximum peak power - stated by the manufacturer: 24.0 kw at 3500 min -1 - measured: 24.0 kw at 3500 min -1 Maximum continuous-rated power electric motor - stated by the manufacturer: 7.5 kw at 3050 min -1 - measured: 7.5 kw at 3050 min -1 Maximum continuous-rated torque electric motor - stated by the manufacturer: 22.8 Nm at 3050 min -1 - measured: 22.8 Nm at 3050 min -1 Maximum current e-motor at maximum continuous-rated power - stated by the manufacturer: A - measured: A

42 Annex T3 Page 4 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Engine performance data Thirty minutes power Elapsed time [min] Motor speed [min -1 ] Test voltage [V] Net power [kw] Net torque [Nm]

43 Annex T4 Page 1 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report (EU) No 3/2014 Annex II; Audible warning devices UNECE regulation No 28 including all amendments up to Series 00, Supplement 4 1. Test item identification The tests were conducted with a test vehicle which is representative of the vehicle type to be approved. The characteristics of the selected vehicle represent the worst case. 2. Vehicle data - Vehicle: JY7222-ZQR - Variant(s)/Version(s): 0/0,0/1 - VIN: Version 0: R1JJE22A6G Version 1: R1JJE27A3GJ Tests and inspections 3.1 Audible warning devices Manufacturer Jiangsu Kailing Automobile Electrical Apparatus Factory Shantou Shengping Kaida Development Co., Ltd Type of horn electromagnetic horn electromagnetic horn Designation DL128D DL134H/L Type approval mark II E II E Specified frequencies 500±20 Hz, 400±20 Hz 490±20 Hz, 430±20 Hz Nominal voltage [V] Number of horns Installation at the vehicle according to Annex MID, item

44 Annex T4 Page 2 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report 4. Test results Maximum sound pressure level [db(a)] (max. value between 0,5 to 1,5 m above ground) Sound-pressure level measured [db(a)]: Minimum limit value [db(a)]: 87 Maximum limit value [db(a)]: 112 The requirements according to item 14 of the UNECE regulation No 28 are fulfilled. TEST PASSED

45 Annex T5 Page 1 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report (EU) No 3/2014 Annex III; Braking, including anti-lock and combined brake systems UNECE regulation No 78 including all amendments up to Series 03, Supplement 2 1. Test item identification The tests were conducted with a test vehicle which is representative of the vehicle type to be approved. The characteristics of the selected vehicle represent the worst case. 2. Vehicle data 2.1. Vehicle description - Vehicle: JY7222-ZQR - Variant(s)/Version(s): 0/0 - VIN: R1JJE22A6G Electric motor - Type designation: JYD Maximum continuous power: kw Transmission - Type: Automatic - Numbers of gears: Forward+Reverse - Gear ratios: Gear Primary ratio Secondary ratio Final drive ratio Forward Test vehicle tyre Axle Tyre make Tyre dimension Approval number Inflation pressure [kpa] Front WANDA 145/70R12 E4-30R Rear WANDA 145/70R12 E4-30R Characteristics of the braking system The characteristics of the braking system correspond to item 5 of the Regulation. The requirements are fulfilled. The type of vehicle is equipped with a parking brake system and a foot-actuated service brake system which operates on the brakes on all wheels by way of a split service brake system.

46 Annex T5 Page 2 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Braking device description - Front: One Ø 210 mm disc hydraulically actuated, one calliper with one single wheel cylinder (One Ø 51.1 mm piston)for each wheel. - Rear : One Ø 210 mm disc hydraulically actuated, one calliper with one single wheel cylinder (One Ø 38.2 mm piston)for each wheel. Brake pads and/or linings - Front: YD/SF603 - Rear : YD/SF603 Antilock brake system (ABS) description Not applicable. 3. Test conditions - Ambient Temperature[ C] : 30 - Relative Humidity[%]: 45 - Wind speed[m/s]: Up to Wind direction: W-E 4 Test results 4.1 Mass of the vehicle at the time of testing [kg]: Brake Lightly Loaded mass (1) Laden mass (2) Front Rear Total (1): as defined in item of the Regulation ECE R78. (2): as defined in item of the Regulation ECE R Maximum speed[km/h]: Results of tests Dry stop with single brake control action Laden vehicle tests Brake Test Speed [km/h] MFDD [m/s 2 ] Split brake [ 5.0] Actuation force [N] 314 [ 500] Vehicle lightly loaded tests Brake Test Speed [km/h] MFDD [m/s 2 ] Actuation force [N] Split brake [ 5.0] 238 [ 500]

47 Annex T5 Page 3 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Dry stop with all service brake controls actuated Vehicle lightly loaded tests Brake Test Speed [km/h] S [m] Actuation force [N] Split brake [ 28.6] 266 [ 500] High speed test Not applicable, the vehicle maximum speed is less than 125 km/h Wet brake test Laden vehicle tests Test Speed [km/h] d avg (1) Deceleration [m/s 2 ] d max (2) Actuation force [N] Baseline [ 500] Wet test [*] 2.14[**] 161 [ 500] Vehicle lightly loaded tests Test Speed [km/h] d avg (1) Deceleration [m/s 2 ] d max (2) Baseline [ 500] Wet test [*] 2.11[**] 105 [ 500] (1) Average deceleration (2) Maximum vehicle deceleration during the complete stop but excluding the final 0.5 seconds (3) Average deceleration in the period 0.5 to 1.0 seconds after the point of actuation of the brake control [*]:[ 1.2 x baseline value] [**]:[ 0.6 x baseline value] d i (3) d i (3) Actuation force [N] Heat fade test Laden vehicle tests Test Speed [km/h] MFDD [m/s 2 ] Actuation force [N] Baseline [ 500] Hot test [***] 351 [ 500] [***]:[ 0.6 x baseline value] ABS system Not applicable, the vehicle is not fitted with ABS system.

48 Annex T5 Page 4 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Parking brake system test Static performance test Laden vehicle tests Gradient slop / facing of the vehicle Measured force applied to control [N] Parking brake 18% / up 280 [ 400] Parking brake 18% / down 271 [ 400] Partial failure, for split service brake system Vehicle lightly loaded tests Brake Test Speed [km/h] MFDD [m/s 2 ] Actuation force [N] Front failure [ 3.3] 368 [ 400] [ 3.3] 388 [ 400] Rear failure [ 3.3] 353 [ 400] [ 3.3] 378 [ 400] Power assisted braking system failure Laden vehicle tests Brake Test Speed [km/h] MFDD [m/s 2 ] Actuation force [N] Split brake [ 2.5] 400 [ 500] TEST PASSED

49 Annex T6 Page 1 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report (EU) No 3/2014 Annex VII; Glazing, windscreen wipers and washers, and defrosting and demisting systems UNECE regulation No 43 including all amendments up to Series 00, Supplement 14 UNECE regulation No 122 including all amendments up to Series 00, Supplement 3 1. Test item identification The tests were conducted with a test vehicle which is representative of the vehicle type to be approved. The characteristics of the selected vehicle represent the worst case. 2. Vehicle data 2.1. Vehicle description - Vehicle: JY7222-ZQR - Variant(s)/Version(s): 0/0 - VIN: R1JJE22A6G Tests and inspections 3.1. Glazing Fitting requirements Vehicle is fitted with safety glazings which are type-approved in accordance with UNECE regulation No 43. For details of the safety glazings, see item 6.5 of Annex MID. The requirements of point 1. of part 1 of Annex VII to Regulation (EU) No 3/2014 are fulfilled Specific provisions of Annex 21 of UNECE regulation No General requirements The safety glazing is fitted in such way, that it remains in position and continues to afford visibility and safety to the occupants of the vehicle under normal operating conditions. All safety glazing fitted to the vehicle bear the appropriate component type-approval mark specified in paragraph 5.4. of the Regulation, followed where applicable, by one of the additional symbols provided for in paragraph 5.5 of the Regulation. The requirements of item 3 of annex 21 of the Regulation are fulfilled Windscreen The windscreen bears the appropriate ECE component type-approval mark specified in item 5.4 of the ECE Regulation R43, followed by one of the additional symbols provided for in item of the ECE Regulation R43.

50 Annex T6 Page 2 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Light transmittance of windsreen The requirements according to item of annex 21 of the Regulation are fulfilled Vehicle type correlation The windscreen is type-approved for the vehicle type on which it is fitted. The requirements according to item of annex 21 of the Regulation are fulfilled Installation of windscreen The windscreen is correctly fitted with reference to the vehicle 'R' point. The requirements according to item of annex 21 of the Regulation are fulfilled Side and rear windows The glazing through which the driver's forward field of vision is obtained, have a light transmittance of at least 70%. The requirements of item of annex 21 of the Regulation are fulfilled Other windows The safety glazing for the opening roof has a light transmittance at least 70%. The requirements of item of annex 21 of the Regulation are fulfilled Windscreen wipers and washers Windscreen wipers fitting requirements The vehicle fitted with a windscreen made from safety glazing is equipped with a windscreen wiper system that can function when the vehicle master control switch has been activated, without any action by the driver other than switching on the operating control for starting and stopping the windscreen wiper system Specific provisions of windscreen wipers Windscreen-wiper field The requirements of point of part 2 of Annex VII to Regulation (EU) No 3/2014 are fulfilled Sweep frequencies of windscreen-wiper systems The requirements of point of part 2 of Annex VII to Regulation (EU) No 3/2014 are fulfilled Operation of windscreen-wiper systems on dry windscreen The requirements of point of part 2 of Annex VII to Regulation (EU) No 3/2014 are fulfilled.

51 Annex T6 Page 3 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Capability of withstanding stalling The requirements of point of part 2 of Annex VII to Regulation (EU) No 3/2014 are fulfilled Windscreen washer system fitting requirements The vehicle fitted with a windscreen made from safety glazing is equipped with a windscreen washer system that can function when the vehicle master control switch has been activated, and is capable of withstanding the loads and pressures resulting when the nozzles are plugged and the system is actuated according to the test procedures Specific provisions of windscreen washer system Temperature cycles tests The requirements of point and of part 2 of Annex VII to Regulation (EU) No 3/2014 are fulfilled Capability tests The requirements of point and of part 2 of Annex VII to Regulation (EU) No 3/2014 are fulfilled Capacity of the reservoir The requirements of point of part 2 of Annex VII to Regulation (EU) No 3/2014 are fulfilled Defrosting and demisting systems Defrosting and demisting systems fitting requirements The vehicle fitted with a windscreen made from safety glazing is equipped with a defrosting and demisting systems. The windscreen defrosting and demisting system is effective enough to ensure adequate visibility through the windscreen in cold weather Specific provisions of UNECE regulation No General The requirements of items 5.2.1, and 6.2 of the ECE Regulation No 122 are fulfilled.

52 Annex T6 Page 4 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Electric Heaters Installation requirements according to item 5.3 of the regulation Positioning of the heater The heater is installed outside of the passenger compartment. The requirements of item of the regulation are fulfilled Fuel supply of combustion heater Not applicable Exhaust system of combustion heater Not applicable Combustion air inlet of combustion heater Not applicable Heating air inlet The heating air supply is fresh air and is drawn from a clean area not likely to be contaminated by exhaust fumes. The inlet duct is protected by mesh. The requirements of item of the regulation are fulfilled Heating air outlet Any ducting used to route the hot air through the vehicle is so positioned or protected that no injury or damage could be caused if it were to be touched. The air outlet is so positioned or guarded that blocking by rubbish or luggage is unlikely. The requirements of items of the Regulation are fulfilled Automatic control of the combustion heating system Not applicable Annex 5 of the regulation: Temperature The temperatures are within the limits specified in Annex 5. The requirements of Annex 5 of the Regulation are fulfilled. TEST PASSED

53 Annex T7 Page 1 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report (EU) No 3/2014 Annex VIII; Driver-operated controls including identification of controls, tell-tales and indicators UNECE regulation No 121 including all amendments up to Series 00, Supplement 8 UNECE regulation No 39 including all amendments up to Series 00, Supplement 5 1. Test item identification The tests were conducted with a test vehicle which is representative of the vehicle type to be approved. The characteristics of the selected vehicle represent the worst case. 2. Vehicle data 2.1. Vehicle description - Vehicle: JY7222-ZQR - Variant(s)/Version(s): 0/0 - VIN: R1JJE22A6G Test vehicle tyre 2.3. Speedometer: Axle Tyre make Tyre dimension Approval number Inflation pressure [kpa] Front WANDA 145/70R12 E4-30R Rear WANDA 145/70R12 E4-30R Manufacturer: Method of operation: JIAYUAN Wheel speed sensor-speedometer Transmission ratio: 41 pulses/ wheel turn Instrument constant: pulses per minute, the pointer indicates 78km/h Specification: According to annex MID, item 6.10

54 Annex T7 Page 2 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report 3. Tests and inspections 3.1. Identification of controls, tell-tales and indicators Graphical representation of the indication symbols See Annex MID item 6.9.1, Summary table with the controls, indicators and tell-tales the vehicle is equipped with See Annex MID item 6.9.3, 6.9.4, Following requirements of Item 5 of the UNECE regulation 121 are fulfilled: - the location (item 5.1. of the UNECE regulation No 121) - the identification (item 5.2. of the UNECE regulation No 121) - the illumination (item 5.3. of the UNECE regulation No 121) - the colour (item 5.4. of the UNECE regulation No 121) - the common space for displaying multiple information(item 5.5. of the UNECE regulation No 121) - the conditions (item 5.6. of the UNECE regulation No 121) 3.2 Speedometer and odometer The specifications regarding visibility and legibility of the speedometer are fulfilled The specifications regarding the graduation of the speedometer Not applicable Accuracy of the speedometer [km/h]: Indicated speed v1 True speed v2 Deviation v1 - v2 Permitted deviation The indicated speed on the speedometer is in accordance to the specifications of UNECE regulation No 39. TEST PASSED

55 Annex T8 Page 1 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report (EU) No 3/2014 Annex IX; Installation of lighting and light- signalling devices, including automatic switching of lighting 1. Test item identification The tests were conducted with a test vehicle which is representative of the vehicle type to be approved. The characteristics of the selected vehicle represent the worst case. 2. Vehicle data - Vehicle: JY7222-ZQR - Variant(s)/Version(s): 0/0 0/1 - VIN: Version 0: R1JJE22A6G Version 1: R1JJE27A3GJ Tests and inspections 3.1. The requirements of point 1.8 to 1.12 of Annex IX to Regulation (EU) No 3/2014 are fulfilled The auxiliary light sources requirements The requirements of point 1.10 of Annex IX to Regulation (EU) No 3/2014 are fulfilled The characteristics of lighting devices The requirements of point 1.11 of Annex IX to Regulation (EU) No 3/2014 are fulfilled Automatically switched-on headlamp or daytime running lamp activation The daytime running lamp shall automatically be ON when activation of the master control switch. The requirements of point 1.12 of Annex IX to Regulation (EU) No 3/2014 are fulfilled Number, make, type-approval number, colour and tell-tale of the lighting and light-signalling devices

56 Annex T8 Page 2 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Devices of mandatory installation Version 0 Name Make Type Colour Tell tale Approval Number Driving-beam headlamp Passing-beam headlamp Front position lamp Front direction indicator lamp Rear direction indicator lamp / Rear position lamp Rear retro-reflector Rear-registrationplate illuminating device Side retroreflector Version 1 GS- RF5950 White Blue E4-112R White White Green E4-7R Amber Green E4-6R Amber Green E4-6R Stop lamp /3 Red N.A. E4-7R Red Instrument illumination Green E4-112R E4-7R Red N.A. E4-3R White Green E4-4R Amber N.A. GS-RF Name Make Type Colour Tell tale Approval Number Driving-beam headlamp Passing-beam headlamp Front position lamp Front direction indicator lamp Rear direction indicator lamp / White Blue E4-112R White Instrument illumination E4-112R White Green E4-7R Amber Green E4-6R Amber Green E4-6R Stop lamp /3 Red N.A. E4-7R Rear position lamp Red Green E4-7R Rear retro-reflector Red N.A. E4-3R Rear-registrationplate illuminating White Green E4-4R device Side retroreflector GS- RF5950 Amber N.A. GS-RF Num ber Num ber

57 Annex T8 Page 3 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Devices of optional installation Version 0 Name Make Type Colour Tell tale Approval Number Hazard warning signal See direction lamps Num ber Front fog lamp Rear fog lamp Red Amber E4-38R Daytime running lamp / Red Amber E4-87R Reversing lamp Red Amber E4-23R Side marker lamp Version 1 Name Make Type Colour Tell tale Approval Number Hazard warning signal See direction lamps Num ber Front fog lamp Rear fog lamp Red Amber E4-38R Daytime running lamp / Red Amber E4-87R Reversing lamp Red Amber E4-23R Side marker lamp The general requirements set out in item 2.1 and 2.2 of the Annex IX to Regulation (EU) No 3/2014 are fulfilled.

58 Annex T8 Page 4 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report 3.4. The individual requirements set out in item 2.3 of the Annex IX to Regulation (EU) No 3/2014 are fulfilled. Geometric Device Number Arrangement Position Orientation Grouped Combined Incorporated visibility Electrical connections Other requirements Driving-beam headlamp 2 No special requirement Fulfilled Fulfilled Towards the front Yes No Yes Fulfilled Fulfilled Passing-beam headlamp 2 No special requirement Fulfilled Fulfilled Towards the front Yes No Yes Fulfilled Fulfilled Front position lamp 2 No special requirement Fulfilled Fulfilled Front Yes No No Fulfilled None Front direction indicator lamp 2 Fulfilled Fulfilled Fulfilled Front Yes No No Fulfilled Fulfilled Rear direction indicator lamp 2 Fulfilled Fulfilled Fulfilled Rear Yes No No Fulfilled Fulfilled Stop lamp 2 No special requirement Fulfilled Fulfilled Towards the rear Yes No Yes Fulfilled Not applicable Rear position lamp 2 No special requirement Fulfilled Fulfilled Towards the rear Yes No Yes Fulfilled None Rear-registrationplate illuminating device 1 Such that the device illuminates the space reserved for the registration plate No No No No special requirement None Rear retro-reflector 2 No special requirement Fulfilled Fulfilled Towards the rear No No No Not applicable Fulfilled Side retro-reflector 2 No special requirement Fulfilled Fulfilled Towards the side No No No Not applicable Not applicable Rear fog lamp 1 No special requirement Fulfilled Fulfilled Towards the rear No No No Fulfilled None Reversing lamp 1 No special requirement Fulfilled Fulfilled Towards the rear No No No Fulfilled Fulfilled Daytime running lamp 2 No special requirement Fulfilled Fulfilled Towards the front No No No Fulfilled None Hazard warning signal See direction lamps Fulfilled Fulfilled TEST PASSED

59 Annex T9 Page 1 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report (EU) No 3/2014 Annex X; Rearward visibility UNECE regulation No 46 including all amendments up to Series 04, Supplement 3 1. Test item identification The tests were conducted with a test vehicle which is representative of the vehicle type to be approved. The characteristics of the selected vehicle represent the worst case. 2. Vehicle data - Vehicle: JY7222-ZQR - Variant(s)/Version(s): 0/0 0/1 - VIN: Version 0: R1JJE22A6G Version 1: R1JJE27A3GJ Maximum speed [km/h]: 78 3 Tests and inspections 3.1 General requirements Item 15.1 of the Regulation: 3.2 Mirrors Number Position Adjustment - The requirements are fulfilled. - The devices for indirect vision installed on the vehicle are type approved - The vehicle was tested up to speeds of 80% of maximum speed. The vehicle is fitted with the following mirrors: Number of mirrors Approval mark Location Class 1 E Driver side III 1 E Passenger side III 1 E Interior I The requirements of item of the Regulation are fulfilled. The requirements of item of the Regulation are fulfilled. The requirements of item of the Regulation are fulfilled.

60 Annex T9 Page 2 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Fields of vision General The requirements of item of the Regulation are fulfilled Obstructions The requirements of item of the Regulation are fulfilled. 3.3 Devices for indirect vision other than mirrors The vehicle type is not equipped with indirect vision devices other than mirrors. TEST PASSED

61 Annex T10 Page 1 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report (EU) No 3/2014 Annex XII; Safety-belt anchorages and safety- belts 1. Test item identification The tests were conducted with a test vehicle which is representative of the vehicle type to be approved. The characteristics of the selected vehicle represent the worst case. 2. Vehicle data - Vehicle: JY7222-ZQR - Variant(s)/Version(s): 0/0 - VIN: R1JJE22A6G Tests and inspections 3.1. Safety belt anchorages and safety belts General requirements Vehicle is fitted with safety belt anchorages and safety belts on seats. Safety belt anchorages conforms to the 7/16-20 UNF 2B thread size and tolerance specifications. It is possible to remove a safety belt without any remaining damage to the safety belt anchorages. The requirements of item 1 of part 1 of Annex XII to Regulation (EU) No 3/2014 are fulfilled Safety belt anchorages Specific requirements for safety belt anchorages The safety belt anchorages may be incorporated within the chassis, bodywork, seat or any other structure of the vehicle. The requirements of items 1.3, 1.4 and 1.5 of part 2 of Annex XII to Regulation (EU) No 3/2014 concerning the location of the effective belt anchorages are fulfilled Testing of the belt anchorages The tests were conducted under consideration of the requirements of items 2 and 3 of part 2 of Annex XII to Regulation (EU) No 3/2014. The specifications concerning test configuration, securing, direction and amount of test force and test procedure are fulfilled.

62 Annex T10 Page 2 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Specific test results for the tests to be carried out on vehicles having a mass in running order 600 kg 1st row left(driver) seat 1st row right seat Seats Shoulder belt Lap belt 10 times of seat mass Shoulder belt Lap belt 10 times of seat mass Load [N] Tested Requirement ± ± ± ± Result PASS PASS The anchorages have withstood the specified test load over the requested minimum time period. No damage is shown which influence the effective anchorage points. The prescribed minimum separation distances between the effective belt anchorages are maintained during the test Installation of safety belts General requirements The vehicle is fitted with three-point safety belts on all seating positions. All safety belts are type-approved in accordance with UNECE regulation No 16 and fitted in accordance with the safety belt manufacturer s specifications. The vehicle is fitted with the following safety belts: Number of mirrors Location 1st row Driver side 1st row Passenger side Approval mark Ar4m E Ar4m E TEST PASSED

63 Annex T11 Page 1 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report (EU) No 3/2014 Annex XIV; Steer-ability, cornering properties and turn-ability 1. Test item identification The tests were conducted with a test vehicle which is representative of the vehicle type to be approved. The characteristics of the selected vehicle represent the worst case. 2. Vehicle data Vehicle: JY7222-ZQR - Variant(s)/Version(s): 0/0 - VIN: R1JJE22A6G Electric motor - Type designation: JYD Maximum continuous power: kw Test vehicle tyre 2.5. Maximum speed [km/h]: Test conditions Axle Tyre make Tyre dimension Approval number Inflation pressure [kpa] Front WANDA 145/70R12 E4-30R Rear WANDA 145/70R12 E4-30R Test surface: Vehicle: Tyre pressure: even, non-slip and dry asphalt laden condition up to technically permissible maximum mass according the manufacturer's recommendation for laden condition

64 Annex T11 Page 2 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report 4. Test results 4.1. Specific construction requirements Vehicle is constructed so that all wheels are capable of rotating at different individual speeds at all times. A device such as a differential is installed and can not be locked automatically or by external means. The vehicle is equipped with a device for reversing which can be operated from the driver s position. The requirements of point 1.2 of Annex XIV to Regulation (EU) No 3/2014 are fulfilled Mass of the vehicle at the time of testing [kg]: Front Rear Total (1): laden condition up to technically permissible maximum mass Results of tests The requirements of point 2.4 are fulfilled. The test was performed with a vehicle speed of 6 km/h with turning radius 12 m The requirements of point 2.5 are fulfilled. The test was performed with a vehicle speed of 23 km/h with turning radius 10 m The requirements of point 2.6 are fulfilled. The test was performed with a vehicle speed of 0.8Vmax km/h The requirements of point 2.7 are fulfilled. The test was performed in a circle with its steered wheels at approximately half lock and a constant speed of at least 6 km/h, TEST PASSED Laden mass (1)

65 Annex T12 Page 1 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report (EU) No 3/2014 Annex XV; Installation of tyres 1. Test item identification The tests were conducted with a test vehicle which is representative of the vehicle type to be approved. The characteristics of the selected vehicle represent the worst case. 2. Vehicle data - Vehicle: JY7222-ZQR - Variant(s)/Version(s): 0/0, 0/1 - VIN: Version 0: R1JJE22A6G Version 1: R1JJE27A3GJ Maximum speed [km/h]: 78 3 Tests and inspections 3.1. Description of the tyres Axle Tyre Designation Rim Designation Load Speed Index Index Approval Number Front 145/70R12 12x5 69 T E4-30R Rear 145/70R12 12x5 69 T E4-30R Front 145/70R12 12x5 69 T E4-30R Rear 145/70R12 12x5 69 T E4-30R Front 145/70R12 12x Q E4-30R Rear 145/70R12 12x Q E4-30R Front 145/70R12 12x N E Rear 145/70R12 12x N E Tyre installation Maximum tyre envelope sizes applied for the clearance assessment: Front: 145/70R12 The installed tyres can move freely in their intended position. Rear: 145/70R Load capacity The tyres fitted have a load capacity at least equal to the declared maximum permissible axle mass Speed capability The tyres fitted have a speed category symbol compatible with the maximum design speed of the vehicle Tyre pressures The declared cold tyre pressure for each tyre for normal on-road use is stated on the vehicle and in the vehicle s instruction manual. TEST PASSED

66 Annex T13 Page 1 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report (EU) No 3/2014 Annex XVII; Vehicle occupant protection, including interior fittings and vehicle doors 1. Test item identification The tests were conducted with a test vehicle which is representative of the vehicle type to be approved. The characteristics of the selected vehicle represent the worst case. 2. Vehicle data - Vehicle: JY7222-ZQR - Variant(s)/Version(s): 0/0 - VIN: R1JJE22A6G Tests and inspections 3.1. Interior fittings Specific requirements and tests Interior zone 1 All contactable edges are rounded with a radius of curvature of at least 3,2 mm. Contactable edges above the level of the instrument panel are rounded with a radius of curvature at least 2,5 mm. Contactable edges of the steering control are rounded with a radius of curvature of at least 2,5 mm. Contactable edges of vanes and openings of ventilation outlets are blunted. The requirements of item 2.1 of Annex XVII to Regulation (EU) No 3/2014 are fulfilled Interior zone 2 All contactable edges are rounded with a radius of curvature of at least 3,2 mm. The requirements of item 2.2 of Annex XVII to Regulation (EU) No 3/2014 are fulfilled Interior zone 3 The front side of seat structures are disregarded. There are no seats behind the first row seats, the rear side of first row seat structures in interior zone 3 are not applicable.

67 Annex T13 Page 2 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report 3.2. Doors General requirements Each door is fitted with a device which keeps it in a closed position Door tests Test results Test point Test force [N] on door centre 2010 Limit [N] 2000 Applied in an outward and horizontal (and thus in the vehicle s transverse) direction at another point in the transverse vertical plane passing through the R- point of the seating position closest to the door in question at a height corresponding to that of the R-point or a point up to 500 mm above it. Not applicable 2000 The devices which keep the door in a closed position are not failed, released or opened completely within 0,2 seconds of reaching the minimum prescribed application force and the door remains closed after removal of the force. TEST PASSED

68 Annex T14 Page 1 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report (EU) No 44/2014 Annex VI; Devices to prevent unauthorised use UNECE regulation No 18 including all amendments up to Series 03, Supplement 3 1. Test item identification The tests were conducted with a test vehicle which is representative of the vehicle type to be approved. The characteristics of the selected vehicle represent the worst case. 2. Vehicle data - Vehicle: JY7222-ZQR - Variant(s)/Version(s): 0/0 - VIN: R1JJE22A6G Tests and inspections 3.1 Devices to prevent unauthorized use General requirements Paragraph 5.1 of the UNECE regulation 18: Paragraph 5.2 to 5.7 of the UNECE regulation 18: Paragraph 5.8 of the UNECE regulation 18: Paragraph 5.9 of the UNECE regulation 18: Paragraph 5.10 of the UNECE regulation 18: Paragraph 5.11 to 5.12 of the UNECE regulation 18: It is necessary to put the device out of action in order to start the engine and to drive the vehicle. Requirements fulfilled Requirements fulfilled Requirements fulfilled Requirements fulfilled Requirements fulfilled Requirements fulfilled

69 Annex T14 Page 2 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Particular requirements Paragraph of the UNECE regulation 18: Paragraph of the UNECE regulation 18: Paragraph of the UNECE regulation 18: Paragraph of the UNECE regulation 18: Paragraph of the UNECE regulation 18: Requirements fulfilled Requirements fulfilled The device has undergone 2500 locking cycles in each direction. The functionality was not affected. Requirements fulfilled Requirements fulfilled Requirements fulfilled TEST PASSED

70 Annex T15 Page 1 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report (EU) No 44/2014 Annex VII; Electromagnetic compatibility (EMC) UNECE regulation No 10 including all amendments up to Series Test item identification The tests were conducted with a test vehicle which is representative of the vehicle type to be approved. The characteristics of the selected vehicle represent the worst case. 2. Vehicle data 2.1. Vehicle description - Vehicle: JY7222-ZQR - Variant(s)/Version(s): 0/0 - VIN: R1JJE22A6G Electric motor - Type designation: JYD Maximum continuous power: kw Tests and inspections 3.1 Configuration other than "REESS charging mode coupled to the power grid" Measurement of radiated broadband electromagnetic emissions from vehicles Antenna position: According to App. 1 of Annex 4 to the ECE Regulation No. 10 Bandwidth: 120 khz Frequency range: 30 to 1000 MHz Detector: Peak (CISPR) Vehicle condition: According to item 2.1 of Annex 4 of the ECE Regulation No. 10

71 Annex T15 Page 2 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Test results: Left side - Vertical antenna Peak 3m limit QP 3m limit Peak value The requirements of item of the ECE Regulation No. 10 are fulfilled. Test passed.

72 Annex T15 Page 3 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Left side - Horizontal antenna Peak 3m limit QP 3m limit Peak value The requirements of item of the ECE Regulation No. 10 are fulfilled. Test passed.

73 Annex T15 Page 4 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Right side - Vertical antenna Peak 3m limit QP 3m limit Peak value The requirements of item of the ECE Regulation No. 10 are fulfilled. Test passed.

74 Annex T15 Page 5 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Right side - Horizontal antenna Peak 3m limit QP 3m limit Peak value The requirements of item of the ECE Regulation No. 10 are fulfilled. Test passed.

75 Annex T15 Page 6 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Measurement of radiated narrowband electromagnetic emissions from vehicles Antenna position: According to Annex 5 of the ECE Regulation No. 10 Bandwidth: 120 khz Frequency range: 30 to 1000 MHz Detector: Average detector Vehicle condition: According to item 2 of Annex 5 of the ECE Regulation No Test results: Left side - Vertical antenna Average 3m limit Average value The requirements of item of the ECE Regulation No. 10 are fulfilled. Test passed.

76 Annex T15 Page 7 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Left side - Horizontal antenna Average 3m limit Average value The requirements of item of the ECE Regulation No. 10 are fulfilled. Test passed.

77 Annex T15 Page 8 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Right side - Vertical antenna Average 3m limit Average value The requirements of item of the ECE Regulation No. 10 are fulfilled. Test passed.

78 Annex T15 Page 9 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Right side - Horizontal antenna Average 3m limit Average value The requirements of item of the ECE Regulation No. 10 are fulfilled. Test passed Immunity to electromagnetic radiation Field strength: According to item 4 of Annex 6 to the ECE Regulation No. 10 Vehicle condition: - '50km/h cycle' vehicle test conditions: - 'Brake cycle' vehicle test conditions: According to item 2 of Annex 6 of the ECE Regulation No. 10 According to item 2 of Annex 6 of the ECE Regulation No Test results No degradation of performance of 'immunity-related' functions was observed during the tests performed in accordance with Annex 6 of the ECE Regulation No. 10. The requirements of item of the ECE Regulation No. 10 are fulfilled. Test passed.

79 Annex T15 Page 10 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report 3.2 Configuration "REESS charging mode coupled to the power grid" Measurement of radiated broadband electromagnetic emissions from vehicles Antenna position: According to App. 1 of Annex 4 to the ECE Regulation No. 10 Bandwidth: 120 khz Frequency range: 30 to 1000 MHz Detector: Peak (CISPR) Vehicle condition: According to item 2.2 of Annex 4 of the ECE Regulation No Test results: Left side - Vertical antenna Peak 3m limit QP 3m limit Peak value The requirements of item of the ECE Regulation No. 10 are fulfilled. Test passed.

80 Annex T15 Page 11 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Left side - Horizontal antenna Peak 3m limit QP 3m limit Peak value The requirements of item of the ECE Regulation No. 10 are fulfilled. Test passed.

81 Annex T15 Page 12 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Right side - Vertical antenna Peak 3m limit QP 3m limit Peak value The requirements of item of the ECE Regulation No. 10 are fulfilled. Test passed.

82 Annex T15 Page 13 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Right side - Horizontal antenna Peak 3m limit QP 3m limit Peak value The requirements of item of the ECE Regulation No. 10 are fulfilled. Test passed Immunity to electromagnetic radiation Field strength: According to item 4 of Annex 6 to the ECE Regulation No. 10 Vehicle condition: - 'REESS charging mode' vehicle test conditions: According to item 2 of Annex 6 to the ECE Regulation No Test results No degradation of performance of 'immunity-related' functions was observed during the tests performed in accordance with Annex 6 of the ECE Regulation No. 10. The requirements of item of the ECE Regulation No. 10 are fulfilled. Test passed.

83 Annex T15 Page 14 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Measurement of harmonics emission generated on AC power lines from vehicle Vehicle condition: According to item 2 of Annex 11 of the ECE Regulation No. 10 Test arrangement: According to item 3 of Annex 11 of the ECE Regulation No Test results: Standard: EN/IEC Ed.3 Quasi-Peak Class A <= 200% of the limit value 10 Periods - (EN/IEC Edition A1:2008) Test results E.U.T.: Harmonics > 200%: order (n): none Harmonics with average > 90%: order (n): none Harmonics between 150% and 200% not longer as 10% of the measuring time or max. 10min: order (n): none Test results AC source: First data exceeding limit value: DS (time): none Harmonics exceeding limit value: order (n): none The requirements of item of the ECE Regulation No. 10 are fulfilled. Test passed Measurement of emission of voltage changes, voltage fluctuations and flicker on AC power lines from vehicle Vehicle condition: According to item 2 of Annex 12 of the ECE Regulation No. 10 Test arrangement: According to item 3 of Annex 12 of the ECE Regulation No. 10

84 Annex T15 Page 15 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Test results: Standard: EN/IEC Flicker Zref (IEC 60725) 230V / 50Hz according IEC Ed2 E.U.T value Limit Test result Pst passed Plt passed dc [%] passed dmax [%] passed dt [s] passed The requirements of item of the ECE Regulation No. 10 are fulfilled. Test passed Measurement of emission of radiofrequency conducted disturbances on AC or DC power lines from vehicle Vehicle condition: According to item 2 of Annex 13 of the ECE Regulation No. 10 Test arrangement: According to item 3 of Annex 13 of the ECE Regulation No Test results: Live line ECE R10 Rev.5 AC power lines Voltage on Mains PK ECE R10 Rev.5 AC power lines Voltage on Mains QP Level in dbuv ECE R10 Rev.5 AC power lines Voltage on Mains AV k M 2M 3M 4M 5M M 20M 30M Frequency in Hz Upper-Peak limit Lower-QP limit AV Limit QP value AV Value

85 Annex T15 Page 16 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Neutral line ECE R10 Rev.5 AC power lines Voltage on Mains PK ECE R10 Rev.5 AC power lines Voltage on Mains QP Level in dbuv ECE R10 Rev.5 AC power lines Voltage on Mains AV k M 2M 3M 4M 5M M 20M 30M Frequency in Hz Upper-Peak limit Lower-QP limit AV Limit QP value AV Value The requirements of item of the ECE Regulation No. 10 are fulfilled. Test passed Measurement of emission of radiofrequency conducted disturbances on network and telecommunication access from vehicles Not applicable.

86 Annex T15 Page 17 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Immunity to electrical fast transient/burst disturbances conducted along AC and DC power line Test results Vehicle condition: According to item 2 of Annex 15 of the ECE Regulation No. 10 Test setup: According to item 4 of Annex 15 of the ECE Regulation No. 10 No degradation of performance of 'immunity-related' functions was observed during the tests performed in accordance with Annex 15 of the ECE Regulation No. 10. The requirements of item of the ECE Regulation No. 10 are fulfilled. Test passed Immunity to surges conducted along AC and DC power lines Test results Vehicle condition: According to item 2 of Annex 15 of the ECE Regulation No. 10 Test setup: According to item 4 of Annex 15 of the ECE Regulation No. 10 No degradation of performance of 'immunity-related' functions was observed during the tests performed in accordance with Annex 16 of the ECE Regulation No. 10. The requirements of item of the ECE Regulation No. 10 are fulfilled. Test passed. TEST PASSED

87 Annex T16 Page 1 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report (EU) No 44/2014 Annex VIII; External projections UNECE regulation No 26 including all amendments up to Series 03, Supplement 3 1. Test item identification The tests were conducted with a test vehicle which is representative of the vehicle type to be approved. The characteristics of the selected vehicle represent the worst case. 2. Vehicle data - Vehicle: JY7222-ZQR - Variant(s)/Version(s): 0/0 - VIN: R1JJE22A6G Tests and inspections 3.1. General requirements The requirements of item of Annex VIII to Regulation (EU) No 44/2014 are fulfilled Specific provisions of UNECE regulation No General requirements The requirements of item 5.1 to 5.5 of the Regulation ECE R26 are fulfilled Particular specifications Ornaments Headlights Parts that are so located, that they can be contacted by a sphere of 100 mm diameter have a radius of curvature of at least 2,5 mm. The requirements of item 6.1 of the Regulation ECE R26 are fulfilled. The headlamps are not equipped with projecting visors or rims but are sunk into the bodywork. The requirements of item 6.2 and in particular are fulfilled Grilles and gaps The requirements of item 6.3 of the Regulation ECE R26 are fulfilled.

88 Annex T16 Page 2 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Windscreen wipers Bumpers The requirements of item 6.4 of the Regulation ECE R26 are fulfilled. The bumpers are integrated into the bodywork and bear a non-rigid outer surface. The requirements of item 6.5 of the Regulation ECE R26 are fulfilled Handles, hinges and push-buttons of doors, luggage compartments and bonnets, fuel tank filler caps and covers The requirements of item 6.6 of the Regulation ECE R26 are fulfilled Wheels, wheel nuts, hub caps and wheel discs The requirements of item 6.7 of the Regulation ECE R26 are fulfilled Sheet-metal edges Body panels The requirements of item 6.8 of the Regulation ECE R26 are fulfilled. The requirements of item 6.9 of the Regulation ECE R26 are fulfilled Lateral air or rain deflectors Not applicable, the vehicle is not fitted with lateral air or rain deflectors Jacking brackets and exhaust pipes The requirements of item 6.11 of the Regulation ECE R26 are fulfilled Air intake and outlet flaps Roof Windows Not applicable, the vehicle is not fitted with air intake and outlet flaps. The requirements of item 6.13 of the Regulation ECE R26 are fulfilled. The vehicle is not equipped with windows which move outwards from the external surface of the vehicle body.

89 Annex T16 Page 3 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report Registration plate brackets Luggage racks and ski racks Aerials The supporting brackets provided by the manufacturer are not contactable with a sphere of 100 mm diameter, if a licence plate is fixed to them. The vehicle type is not suited to be fixed with luggage or ski racks. Not applicable, the vehicle is not fitted with aerials. TEST PASSED

90 Annex T17 Page 1 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report (EU) No 44/2014 Annex XI; Masses and dimensions 1. Test item identification The tests were conducted with a test vehicle which is representative of the vehicle type to be approved. The characteristics of the selected vehicle represent the worst case. 2. Vehicle data - Vehicle: JY7222-ZQR - Variant(s)/Version(s): 0/0 - VIN: R1JJE22A6G Tests and inspections 3.1. Vehicle masses The vehicle masses are determined in accordance with the requirements of point 2 of Annex XI to Regulation (EU) No 44/2014. Items Measured [kg] Declared [kg] Mass in running order[*] Limit for category L7e vehicle transport of passengers 450 kg Technically permissible maximum laden mass [*] The vehicle is powered by battery. Axle Axle Total Axle Axle Total Prescriptions The mass in running order mass is less than the mass in running order limit for category L7e-CP. The sum of the technically permissible maximum axle load is not less than the technically permissible maximum laden mass of the vehicle. The mass of optional equipment is less than 10% of the mass in running order limit for category L7e-CP laid down in Annex I to Regulation (EU) No 168/2013. The technically permissible maximum mass is not less than the actual mass. Where the vehicle is laden to the technically permissible maximum laden mass, the mass on each axle shall not exceed the technically permissible maximum mass on that axle. When the vehicle is laden to the technically permissible maximum mass, the mass on the front axle is not less than 30% of the technically permissible maximum mass of the vehicle. The maximum permissible pay-mass of the vehicle is limited to mass in running order limit of the (sub)category.

91 Annex T17 Page 2 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report 3.2. Vehicle dimensions The vehicle masses are determined in accordance with the requirements of point 3 of Annex XI to Regulation (EU) No 44/ Specific requirements regarding the vehicle masses and dimensions of subcategories L6e-A, L7e-A and L7e-B relating to static vehicle stability Not applicable TEST PASSED Items Measured [mm] Declared [mm] Difference [ 3%] Length( 3700 mm) % Width( 1500 mm) % Height( 2500 mm) % Wheelbase % Front track width % Rear track width % R point( 400 mm) N.A.

92 Annex T18 Page 1 Technical Report No. 61JUA0001B Type: JY7222-ZQR Detailed Test Report (EU) No 44/2014 Annex XIV; Registration plate space 1. Test item identification The tests were conducted with a test vehicle which is representative of the vehicle type to be approved. The characteristics of the selected vehicle represent the worst case. 2. Vehicle data - Vehicle: JY7222-ZQR - Variant(s)/Version(s): 0/0 - VIN: R1JJE22A6G Tests and inspections 3.1. Dimensions of the mounting surface Width : 280 mm Height : 200 mm 3.2. General location 3.3. Inclination The rear registration plate is located at the front and rear of the vehicle and positioned entirely within the two parallel longitudinal planes passing through the outer extremities of the vehicle. The front and rear registration plate is at right angles to the median longitudinal plane of the vehicle. The front and rear registration plate faces upwards but is not inclined more than 30 from the vertical Height over ground The upper edge of the space for mounting the registration plate is not higher than 1.5 m and the lower edge is not lower than 0.2 m Geometric visibility The requirements regarding angles of visibility for the space of mounting the front and rear registration plate are fulfilled Other requirements The requirements of point 1.7 of Annex XIV to Regulation (EU) No 44/2014 are fulfilled. TEST PASSED

93 Annex S Page 1 Technical Report No. 61JUA0001B Type: JY7222-ZQR List of Regulatory Acts Item Subject Regulatory Act Reference As amended by Applicable to variant/version ENVIRONMENTAL AND PROPULSION UNIT PERFORMANCE REQUIREMENTS (EPPR) 1 Tailpipe emissions after cold start Not applicable 2 Tailpipe emissions at (increased idle)/ free acceleration test Not applicable 3 Emissions crank-case gases Not applicable 4 Evaporative emissions Not applicable 5 Durability of pollution-control devices Not applicable 6 Measurement of CO 2 emissions, fuel consumption, electric energy consumption and electric range determination (EU) No 134/2014 Annex VII (EU) 2016/1824 0/0, 0/1 7 Environmental on-board diagnosis (OBD) tests Not applicable 8 Permissible sound level Not applicable 9 Procedures and technical requirements on maximum vehicle design speed, maximum torque, maximum continuous total power and maximum peak power (EU) No 134/2014 Annex X (EU) 2016/1824 0/0, 0/1 10 Vehicle propulsion family definition Not applicable VEHICLE FUNCTIONAL SAFETY REQUIREMENTS 1 Audible warning devices (EU) No 3/2014 Annex II (EU) 2016/1824 0/0, 0/1 2 Braking, including anti-lock and combined brake systems (EU) No 3/2014 Annex III (EU) 2016/1824 0/0, 0/1 3 Electrical safety (EU) No 3/2014 Annex IV (EU) 2016/1824 0/0, 0/1 4 Manufacturer declaration requirements regarding endurance testing of functional safety-critical systems, parts and equipment (EU) No 3/2014 Annex V (EU) 2016/1824 0/0, 0/1

94 Annex S Page 2 Technical Report No. 61JUA0001B Type: JY7222-ZQR List of Regulatory Acts Item Subject Regulatory Act Reference As amended by Applicable to variant/version 5 Front and rear protective structures Not applicable 6 Glazing, windscreen wipers and washers, and defrosting and demisting systems (EU) No 3/2014 Annex VII (EU) 2016/1824 0/0, 0/1 7 Driver-operated controls including identification of controls, tell-tales and indicators (EU) No 3/2014 Annex VIII (EU) 2016/1824 0/0, 0/1 8 Installation of lighting and light- signalling devices, including automatic switching of lighting (EU) No 3/2014 Annex IX (EU) 2016/1824 0/0, 0/1 9 Rearward visibility (EU) No 3/2014 Annex X (EU) 2016/1824 0/0, 0/1 10 Rollover protective structure (ROPS) Not applicable 11 Safety-belt anchorages and safety- belts (EU) No 3/2014 Annex XII (EU) 2016/1824 0/0, 0/1 12 Seating positions (saddles and seats) (EU) No 3/2014 Annex XIII (EU) 2016/1824 0/0, 0/1 13 Steer-ability, cornering properties and turnability (EU) No 3/2014 Annex XIV (EU) 2016/1824 0/0, 0/1 14 Installation of tyres (EU) No 3/2014 Annex XV (EU) 2016/1824 0/0, 0/1 15 Vehicle maximum speed limitation plate and its location on the vehicle Not applicable 16 Vehicle occupant protection, including interior fittings and vehicle doors (EU) No 3/2014 Annex XVII (EU) 2016/1824 0/0, 0/1 17 Maximum continuous total power and/or maximum vehicle speed limitation by design (EU) No 3/2014 Annex XVIII (EU) 2016/1824 0/0, 0/1 18 Requirements on vehicle structure integrity (EU) No 3/2014 Annex XIX (EU) 2016/1824 0/0, 0/1

95 Annex S Page 3 Technical Report No. 61JUA0001B Type: JY7222-ZQR List of Regulatory Acts Item Subject Regulatory Act Reference As amended by Applicable to variant/version VEHICLE CONSTRUCTION AND GENERAL TYPE-APPROVAL REQUIREMENTS 1 Powertrain tampering prevention measures (anti-tampering) (EU) No 44/2014 Annex II (EU) 2016/1824 0/0, 0/1 2 Arrangements for type-approval procedures (EU) No 44/2014 Annex III (EU) 2016/1824 0/0, 0/1 3 Conformity of production (EU) No 44/2014 Annex IV (EU) 2016/1824 0/0, 0/1 4 Coupling devices and attachments Not applicable 5 Devices to prevent unauthorised use (EU) No 44/2014 Annex VI (EU) 2016/1824 0/0, 0/1 6 Electromagnetic compatibility (EMC) (EU) No 44/2014 Annex VII (EU) 2016/1824 0/0, 0/1 7 External projections (EU) No 44/2014 Annex VIII (EU) 2016/1824 0/0, 0/1 8 Fuel storage Not applicable 9 Load platforms Not applicable 10 Masses and dimensions (EU) No 44/2014 Annex XI (EU) 2016/1824 0/0, 0/1 11 On-board diagnostics (OBD) functional requirements Not applicable 12 Passenger handholds and footrests Not applicable 13 Registration plate space (EU) No 44/2014 Annex XIV (EU) 2016/1824 0/0, 0/1 14 Access to repair and maintenance information (EU) No 44/2014 Annex XV (EU) 2016/1824 0/0, 0/1 15 Stands Not applicable

96 Annex GI1 Page 1 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Information [ ] Numbering according to Appendix 1 to Annex VI to Regulation (EU) No 901/2014 as last amended by (EU) 2016/1825 for type of complete vehicle Yes: No: for type of completed vehicle Yes: No: for type of incomplete vehicle Yes: No: for type of vehicle with complete and incomplete variants Yes: No: for type of vehicle with completed and incomplete variants Yes: No: SECTION I [0.1.] Make (trade name of manufacturer): JIAYUAN [0.2.] Type: JY7222-ZQR [0.2.1.] Variant(s): 0 [0.2.2.] Version(s): 0, 1 [0.2.3.] Commercial name(s) (if available): EIDOLA [0.3.] Category L7e Subcategory L7e-C Sub-subcategory L7e-CP [0.4.] Company name and address of manufacturer of the complete vehicle: [0.4.1.] Name(s) and address(es) of assembly plant(s): CHINA JIAYUAN POWER(HONG KONG) LIMITED Rooms /F, Manulife Provident Funds Place, 345 Nathan Road, KL, HONG KONG NANJING JIAYUAN SPECIAL ELECTRIC VEHICLES MANUFACTURE CO.,LTD. No.266 Xiongzhou South Road, Longchi Avenue, Luhe District, Nanjing City, Jiangsu Province, P.R.China [0.4.2.] Name and address of manufacturer s JOVE INTERNATIONAL GROUP LIMITED authorised representative, if any: Akara Bldg., 24 De Castro Street, Wickhams Cay I, Road Town Tortola, British Virgin Islands

97 Annex GI1 Page 2 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Information [1.] Technical service responsible for carrying ATE EL s.à r.l. out the tests: 14, op Huefdreisch L-6871 Wecker [2.] Date of test report: [3.] Number of test report: 61JUA0001B SECTION III The undersigned hereby certifies the accuracy of the manufacturer s description in the attached information document of the vehicle type described above, for which one or more representative samples, selected by the EU type-approval authority, have been submitted as prototypes of the vehicle type and that the attached test results apply to the vehicle type. [1.] The complete vehicle type meets/does not meet all relevant requirements as listed in Annex II to Regulation (EU) No 168/2013. [1.1.] Restrictions of validity: Not applicable [1.2.] Waivers applied: Not applicable [1.2.1.] Reasons for the waivers: Not applicable [1.2.2.] Alternative requirements: Not applicable [2.] [2.1.] SECTION II Addendum to the EU type-approval certificate List of regulatory acts with which the type of vehicle complies To be filled in only in the case of type-approval in accordance with Article 30(6)of Regulation (EU) No 168/2013 See Annex S

98 Annex GI1 Page 3 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Information Executive summary of the test results according to item 2.2. of Annex VIII of Regulation (EU) No 901/2014 as last amended by (EU) 2016/1825 [2.2.1.] (A) Environmental and propulsion unit performance See technical report Annex T2 [2.2.2.] (B) Functional safety test reports Test result sheet [ ] Front and rear protective structures Not applicable [ ] Description and justification of the relevant provisions against which the vehicles has been assessed: Not applicable [ ] Driver-operated controls including identification of controls, tell-tales and indicators [ ] Detailed list of controls, tell-tales, tell-tales colours and indicators of the vehicle: See technical report Annex T8 [ ] Assessment of the visibility: Visible under all circumstances [ ] Installation of lighting and light-signalling devices, including automatic light switching [ ] Specific test conditions (e.g. indicator-bulb malfunction): The tests have been carried out in accordance with the requirements of (EU) No 3/2014 Annex IX. [ ] Safety belt anchorages and safety belts [ ] Description and justification of the relevant provisions The vehicle is assessed in accordance against which the vehicle has been assessed: with the general requirements and special provisions for category L7e-CP. [ ] Installation of tyres [ ] Maximum tyre envelope sizes applied for the clearance assessment: Yes [ ] Vehicle occupant protection, including interior fittings and vehicle doors [ ] Values of radii measurement of interior projections in sufficient detail: See technical report Annex T13

99 Annex GI1 Page 4 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Information [ ] Maximum continuous total power and/or maximum vehicle speed limitation by design [ ] Maximum vehicle speed and/or maximum continuous total power for vehicles equipped with PI/CI combustion engine limited by: Not applicable (a) the properties, timing or presence of the spark igniting the fuel/air mixture in the cylinder(s): Yes: No: (b) the amount of air intake of the engine: Yes: No: (c) the amount of fuel intake of the engine: Yes: No: (d) the mechanically-controlled output rotation speed of the drive-train, such as clutch, transmission or final drive: Yes: No: [ ] Maximum vehicle speed and/or maximum power shall be limited by means of two or more of the following, for vehicles which are propelled by means of one or more electric motors, including pure and hybrid electric vehicles: (a) reduction of the maximum power output of one or more electric motors based on the vehicle or rotation speed as sensed internally to the electric motor: Yes: No: (b) reduction of the maximum power output of one or more electric motors based on the actual vehicle speed as sensed fully externally to the electric motor: Yes: No: (c) physical vehicle speed limitation by means of internal or external components such as a maximum achievable revolution speed of an electric motor: Yes: No: [ ] Maximum vehicle speed and/or maximum power shall be limited by means of two or more of the following, for vehicles which are propelled by other means than those referred to in and : Not applicable

100 Annex GI1 Page 5 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Information [2.2.3.] (C) Vehicle construction test reports [ ] Arrangements for type-approval procedures Virtual Delegated act Annex No and/or selftesting Subject reference Restrictions / Comments Applied Commission Delegated Regulation (EU) No 134/2014 X Self-testing Testing procedures on maximum vehicle design speed Only for subcategories L3e, L4e and L5e and does not include any other propulsion unit performance testing. yes/no Commission Delegated Regulation (EU) No 3/2014 II Self-testing Audible warning devices Installation only yes/no Commission Delegated Regulation (EU) No 3/2014 VIII Self-testing Driver-operated controls including identification of controls, tell-tales and indicators Speedometer only yes/no Commission Delegated Regulation (EU) No 3/2014 Commission Delegated Regulation (EU) No 3/2014 Commission Delegated Regulation (EU) No 3/2014 Commission Delegated Regulation (EU) No 44/2014 Commission Delegated Regulation (EU) No 44/2014 Commission Implementing Regulation (EU) No 901/2014 IX X XV XIV XVI V Virtual testing Virtual testing Virtual testing Self & virtual testing Self-testing Self-testing Installation of lighting and light- signalling devices Rearward visibility Installation of tyres Registration plate space Stands Statutory plate and EU type-approval mark Dimensions only Installation only; only according to UNECE Regulation No 81 Only where clearance exceeds 10 mm. Only point 2.5. stand retention systems. yes/no yes/no yes/no yes/no yes/no yes/no

101 Annex GI1 Page 6 Technical Report No. 61JUA0001B Type: JY7222-ZQR General Information [ ] Requirements applying to coupling devices Not applicable and attachments [ ] Dynamic strength test (endurance test) coupling ball and/or head: passed/failed [ ] Test results dynamic strength test (endurance test): Not applicable [ ] Requirements applying to external projections [ ] Values of radii measurement of exterior projections in sufficient detail: See Annex MID [ ] Description and justification of the relevant provisions The vehicle is assessed in accordance against which the vehicle has been assessed: with the general requirements and special provisions for category L7e-CP. [ ] On-board diagnostics (OBD) functional requirements: Not applicable [ ] Stands Not applicable [ ] Detailed description and assessment of the system used to prevent propulsion of the vehicle when the stand is in use: Not applicable

102 Annex MID Test report No. 61JUA0001B page 1 of 137 Type: JY7222-ZQR Date : Dec Ext. : 01 EUROPEAN TYPE-APPROVAL OF TWO OR THREE-WHEEL VEHICLES AND QUADRICYCLES (Information Folder No. JY7222-ZQR -01) INDEX OF INFORMATION DOCUMENT INDEX OF CONTENT APPENDIX CONTENT DATE 1 INFORMATION ON THE TYPE-APPROVAL PROCEDURE CHOSEN DEC TYPE APPROVAL NUMBERS AND TEST REPORTS OVERVIEW DEC VARIANTS AND VERSIONS MATRIX DEC INFORMATION DOCUMENT AND DRAWINGS DEC STATEMENTS ON ENDURANCE TESTING DEC STATEMENTS ON STRUCTURE INTEGRITY DEC MANUFACTURER S CERTIFICATES PROVIDING PROOF OF COMPLIANCE TO THE TYPE APPROVAL AUTHORITY ON ACCESS TO VEHICLE ON-BOARD DIAGNOSTICS (OBD) AND TO VEHICLE REPAIR AND MAINTENANCE INFORMATION DEC DECLARATION ON POWERTRAIN TAMPERING PREVENTION MEASURES (ANTI-TAMPERING) (IF APPLICABLE) DEC. 2016

103 Annex MID Test report No. 61JUA0001B page 2 of 137 Type: JY7222-ZQR Date : Dec Ext. : 01 EUROPEAN TYPE-APPROVAL OF TWO OR THREE-WHEEL VEHICLES AND QUADRICYCLES (Information Folder No. JY7222-ZQR -01) Document revisions history Ext. No. / Extension reason Date Corr. No. 00 First application JULY To be added: - item the new version 1 - item /30 minutes power - item Fuel consumption - item CO 2 emissions - item Energy consumption - item Electric range - item 6.1. the new audible warning devices - the item the new lamps for version 1 - the item the new tyres -new drawings: JY7222-ZQR-03-1, JY7222-ZQR-04-1, JY7222-ZQR-05-1, JY7222-ZQR-06-1, JY7222- ZQR-08-1, JY7222-ZQR , JY7222-ZQR , JY7222-ZQR-17-1, JY7222-ZQR-18-1, JY7222- ZQR-21-1, JY7222-ZQR-22-1, JY7222-ZQR-28-1, JY7222-ZQR , JY7222-ZQR , JY7222- ZQR-31-1, JY7222-ZQR-32-1, JY7222-ZQR , JY7222-ZQR , JY7222-ZQR-34-1, JY7222- ZQR-39-1, JY7222-ZQR-40-1, JY7222-ZQR-41-1, JY7222-ZQR-44-1, JY7222-ZQR-48-1 for version 1 DEC To be updated: -the regulation (EU)2016/1824 and (EU)2016/1825

104 Annex MID Test report No. 61JUA0001B page 3 of 137 Type:JY7222-ZQR Appendix 1 Date : Dec Ext. : 01 Information on the type-approval procedure chosen in accordance with with Article 25(1) of Regulation (EU) No 168/2013 -Information folder sheet- The undersigned: Mr. Kang Ma, Vice General Manager Company name and address of manufacturer: CHINA JIAYUAN POWER(HONG KONG)LIMITED Rooms /F, Manulife Provident Funds Place, 345 Nathan Road, KL, HONG KONG Name and address of the manufacturer s representative (if any): JOVE INTERNATIONAL GROUP LIMITED Akara Bldg., 24 De Castro Street, Wickhams Cay I, Road Town Tortola, British Virgin Islands Hereby applies for type-approval procedure: (a) step-by-step type-approval (b) single-step type-approval (c) mixed type-approval Where procedures (a) or (c) are chosen, compliance with requirements as under (b) is declared for all systems, components and separate technical units. Multi-stage type-approval chosen in accordance with Article 25(5) of Regulation (EU) No 168/2013: yes/no Information on the vehicle(s) to be filled in, if application is for EU whole-vehicle type- approval: 0.1. Make (trade name of the manufacturer): JIAYUAN 0.2. Type: JY7222-ZQR Variant(s): Version(s): 0, Commercial name(s) (if available): EIDOLA 0.3. Category, subcategory and sub-subcategory of vehicle: L7e-CP Information on the vehicle(s) to be filled in, if application is for type-approval of a system/ component/ separate technical unit: N.A Make (trade name of the manufacturer): N.A Type: N.A Commercial name(s) (if available):n.a.

105 Annex MID Test report No. 61JUA0001B page 4 of 137 Type:JY7222-ZQR Appendix 1 Date : Dec Ext. : Virtual and/or self-testing Overview list with virtual and/or self-tested systems, components or separate technical units pursuant to point 6 of Annex III to Commission Delegated Regulation (EU) No 44/2014 below: N.A Detailed report on validation of virtual and/or self-testing added: yes/no Place: Hongkong Date: 3 rd DEC Signature: Name and position in the company: Kang Ma, Vice General Manager

106 Annex MID Test report No. 61JUA0001B page 5 of 137 Type:JY7222-ZQR Appendix 2 Date : Dec Ext. : 01 Type-approval numbers and Test Reports overview Item No. A1 A2 A3 B1 B2 subject Environmental test procedures related to exhaust emissions, evaporative emissions, greenhouse gas emissions, fuel consumption and reference fuels Maximum design vehicle speed, maximum torque, maximum continuous total engine power of propulsion Test procedures related to sound Audible warning devices Installation Audible warning devices Audible warning devices Braking, including antilock and combined brake systems Type-approval number or test report number Date of issue of the typeapproval or of its extension or of the test report Member State or contracting party issuing the typeapproval or technical service issuing the test report 61JUA0001B ATE EL 61JUA0001B ATE EL Reference to the regulatory act and its latest amendment (EU) No 134/2014 Annex II to VIII* (EU) 2016/1824 (EU) No 134/2014 Annex X (EU) 2016/1824 Variant(s)/ version(s) 0/0, 0/1 0/0, 0/1 N.A. N.A. N.A. N.A. N.A. 61JUA0001B ATE EL E11 28R Ext. 00 E4 28R Ext United Kingdom Netherlands 61JUA0001B ATE EL B3 Electrical safety 61JUA0001B ATE EL B4 B5 B6 Manufacturer declaration requirements regarding endurance testing of functional safety-critical systems, parts and equipment 61JUA0001B ATE EL Front and rear protective structures Glazing, windscreen wipers and washers, and defrosting and demisting 61JUA0001B ATE EL systems Windscreen E4 43R Ext Netherlands (EU) No 3/2014 Annex II (EU) 2016/1824 UNECE R28 Series 00 Supplement 3 UNECE R28 Series 00 Supplement 3 (EU) No 3/2014 Annex III (EU) 2016/1824 (EU) No 3/2014 Annex IV (EU) 2016/1824 (EU) No 3/2014 Annex V (EU) 2016/1824 0/0, 0/1 N.A. 0/0, 0/1 0/0, 0/1 0/0, 0/1 0/0, 0/1 N.A. N.A. N.A. N.A. N.A. (EU) No 3/2014 Annex VII (EU) 2016/1824 UNECE R43 Series 00 Supplement 14 0/0, 0/1 0/0, 0/1

107 Annex MID Test report No. 61JUA0001B page 6 of 137 Type:JY7222-ZQR Appendix 2 Date : Dec Ext. : 01 B7 B8 Front door glazing Quarter glazing Back door glazing Opening roof glazing Driver-operated controls including identification of controls, tell-tales and indicators Installation of lighting and light- signalling devices, including automatic switching of lighting Driving beam headlamp Passing beam headlamp E13*43R00*43R 00*6061 Ext.00 E4 43R Ext.00 E4 43R Ext.00 E4 43R Ext Luxembourg Netherlands Netherlands Netherlands 61JUA0001B ATE EL 61JUA0001B ATE EL E4 112R Ext.00 Driving beam headlamp E4 112R- Passing beam Ext.00 headlamp Front position lamp E4 7R Ext.00 Front position lamp E4 7R Ext.00 Front direction indicator Front direction indicator E4 6R Ext.00 E4 6R Ext.00 Daytime running lamp E4 87R Ext.00 Rear direction indicator Rear position lamp Stop lamp E4 6R Ext.00 E4 7R Ext.00 Rear retro-reflector E4 3R Ext.00 Rear fog lamp E4 38R Ext.00 Rear fog lamp E4 38R Ext Netherlands Netherlands Netherlands Netherlands Netherlands Netherlands Netherlands Netherlands Netherlands Netherlands Netherlands Netherlands UNECE R43 Series 00 Supplement 10 UNECE R43 Series 00 Supplement 14 UNECE R43 Series 00 Supplement 14 UNECE R43 Series 00 Supplement 14 (EU) No 3/2014 Annex VIII (EU) 2016/1824 (EU) No 3/2014 Annex IX (EU) 2016/1824 UNECE R112 Series 01 Supplement 5 UNECE R112 Series 01 Supplement 6 UNECE R7 Series 02 Supplement 23 UNECE R7 Series 02 Supplement 24 UNECE R6 Series 01 Supplement 26 UNECE R6 Series 01 Supplement 26 UNECE R87 Series 00 Supplement 17 UNECE R6 Series 01 Supplement 26 UNECE R7 Series 02 Supplement 23 UNECE R3 Series 02 Supplement 15 UNECE R38 Series 00 Supplement 16 UNECE R38 Series 00 Supplement 17 0/0, 0/1 0/0, 0/1 0/0, 0/1 0/0, 0/1 0/0, 0/1 0/0, 0/1 0/0 0/1 0/0 0/1 0/0 0/1 0/0, 0/1 0/0, 0/1 0/0, 0/1 0/0, 0/1 0/0 0/1

108 Annex MID Test report No. 61JUA0001B page 7 of 137 Type:JY7222-ZQR Appendix 2 Date : Dec Ext. : 01 B9 B10 B11 B12 B13 B14 Rear reversing lamp E4 23R Ext.00 Rear reversing lamp E4 23R Ext.00 Rear registration plate lamp Side retro-reflector E4 4R Ext.00 E4 3R Ext Netherlands Netherlands Netherlands Netherlands Rearward visibility 61JUA0001B ATE EL Exterior rear-view mirror Interior rear-view mirror Rollover protective structure (ROPS) Safety-belt anchorages and safety- belts First row of seats driver safety- belt First row of seats passenger safety- belt Seating positions (saddles and seats) Steer-ability, cornering properties and turnability E32-46R Ext.00 E32-46R Ext Latvia Latvia UNECE R23 Series 00 Supplement 19 UNECE R23 Series 00 Supplement 20 UNECE R4 Series 00 Supplement 17 UNECE R3 Series 02 Supplement 12 (EU) No 3/2014 Annex X (EU) 2016/1824 UNECE R46 Series 04 Supplement 1 UNECE R46 Series 04 Supplement 1 0/0 0/1 0/0, 0/1 0/0, 0/1 0/0, 0/1 0/0, 0/1 0/0, 0/1 N.A. N.A. N.A. N.A. N.A. 61JUA0001B ATE EL E4-16R Ext.00 E4-16R Ext Netherlands Netherlands 61JUA0001B ATE EL 61JUA0001B ATE EL Installation of tyres 61JUA0001B ATE EL Tyres-Front Tyres-Rear Tyres-Front Tyres-Rear Tyres-Front Tyres-Rear E4 30R Ext.01 E4 30R Ext.01 E4 30R Ext.00 E4 30R Ext.00 E4 30R Ext.00 E4 30R Ext Netherlands Netherlands Netherlands Netherlands Netherlands Netherlands (EU) No 3/2014 Annex XII (EU) 2016/1824 UNECE R16 Series 06 UNECE R16 Series 06 (EU) No 3/2014 Annex XIII (EU) 2016/1824 (EU) No 3/2014 Annex XIV (EU) 2016/1824 (EU) No 3/2014 Annex XV (EU) 2016/1824 UNECE R30 Series 02 Supplement 15 UNECE R30 Series 02 Supplement 15 UNECE R30 Series 02 Supplement 17 UNECE R30 Series 02 Supplement 17 UNECE R30 Series 02 Supplement 17 UNECE R30 Series 02 Supplement 17 0/0, 0/1 0/0, 0/1 0/0, 0/1 0/0, 0/1 0/0, 0/1 0/0, 0/1 0/0, 0/1 0/0, 0/1 0/0, 0/1 0/0, 0/1 0/0, 0/1 0/0, 0/1

109 Annex MID Test report No. 61JUA0001B page 8 of 137 Type:JY7222-ZQR Appendix 2 Date : Dec Ext. : 01 B15 B16 B17 B18 C1 C2 C3 C4 C5 C6 Tyres-Front Tyres-Rear Vehicle maximum speed limitation plate and its location on the vehicle Vehicle occupant protection, including interior fittings and vehicle doors Maximum continuous total power and/or maximum vehicle speed limitation by design Vehicle structure integrity Anti-tampering measures Arrangements for typeapproval procedures Conformity of production requirement Coupling devices and attachments Devices to prevent unauthorised use Electromagnetic compatibility (EMC) E Ext.00 E Ext Spain Spain UNECE R30 Series 02 Supplement 17 UNECE R30 Series 02 Supplement 17 0/0, 0/1 0/0, 0/1 N.A. N.A. N.A. N.A. N.A. 61JUA0001B ATE EL 61JUA0001B ATE EL 61JUA0001B ATE EL 61JUA0001B ATE EL 61JUA0001B ATE EL 61JUA0001B ATE EL (EU) No 3/2014 Annex XVII (EU) 2016/1824 (EU) No 3/2014 Annex XVIII (EU) 2016/1824 (EU) No 3/2014 Annex XIX (EU) 2016/1824 (EU) No 44/2014 Annex II (EU) 2016/1824 (EU) No 44/2014 Annex III (EU) 2016/1824 (EU) No 44/2014 Annex IV (EU) 2016/1824 0/0, 0/1 0/0, 0/1 0/0, 0/1 0/0, 0/1 0/0, 0/1 0/0, 0/1 N.A. N.A. N.A. N.A. N.A. 61JUA0001B ATE EL 61JUA0001B ATE EL C7 External projections 61JUA0001B ATE EL (EU) No 44/2014 Annex VI (EU) 2016/1824 (EU) No 44/2014 Annex VII (EU) 2016/1824 (EU) No 44/2014 Annex VIII (EU) 2016/1824 C8 Fuel storage N.A. N.A. N.A. N.A. N.A. C9 Load platforms N.A. N.A. N.A. N.A. N.A. C10 Masses and dimensions 61JUA0001B ATE EL (EU) No 44/2014 Annex XI (EU) 2016/1824 C11 On-board diagnostics N.A. N.A. N.A. N.A. N.A. C12 Passenger handholds and footrests N.A. N.A. N.A. N.A. N.A. 0/0, 0/1 0/0, 0/1 0/0, 0/1 0/0, 0/1

110 Annex MID Test report No. 61JUA0001B page 9 of 137 Type:JY7222-ZQR Appendix 2 Date : Dec Ext. : 01 C13 Registration plate space 61JUA0001B ATE EL C14 Repair and maintenance information 61JUA0001B ATE EL (EU) No 44/2014 Annex XIV (EU) 2016/1824 (EU) No 44/2014 Annex XV (EU) 2016/1824 C15 Stands N.A. N.A. N.A. N.A. N.A. Remark: In respect of the applicable subjects for the vehicle set out in Annex II to Regulation (EU) No 168/ /0, 0/1 0/0, 0/1 Place: Hongkong Date: 3 rd DEC 2016 Signature: Name and position in the company: Kang Ma, Vice General Manager

111 Annex MID Test report No. 61JUA0001B page 10 of 137 Type:JY7222-ZQR Appendix 3 Date : Dec 2016 Ext. : 01 Variants and Versions matrix Item No. Variant Version Motor Battery Rear axle Hand of drive See Appendix kw Lead-acid battery 100 Ah 72 V Individual wheel suspension Left kw Lead-acid battery 100 Ah 72 V Individual wheel suspension Remark: The right-hand drive version and left-hand drive version are symmetrical. Right

112 Annex MID Test report No. 61JUA0001B page 11 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : GENERAL INFORMATION A. GENERAL INFORMATION CONCERNING VEHICLES 0.1. Make (trade name of manufacturer): JIAYUAN 0.2. Type: JY7222-ZQR Variants: Versions: 0, Commercial name(s) (if available): EIDOLA 0.3. Category, subcategory and sub-subcategory of vehicle: L7e-CP 0.4. Company name and address of manufacturer: CHINA JIAYUAN POWER(HONG KONG)LIMITED Rooms /F, Manulife Provident Funds Place, 345 Nathan Road, KL, HONG KONG Name(s) and address(es) of assembly plants: NANJING JIAYUAN SPECIAL ELECTRIC VEHICLES MANUFACTURE CO.,LTD. No.266 Xiongzhou South Road, Longchi Avenue, Luhe District, Nanjing City, Jiangsu Province, P.R.China Name and address of manufacturer s authorised representative, if any: JOVE INTERNATIONAL GROUP LIMITED Akara Bldg., 24 De Castro Street, Wickhams Cay I, Road Town Tortola, British Virgin Islands 0.5. Manufacturer s statutory plate(s): Location of the manufacturer s statutory plate: R, X1000 Y-535 Z350, See the drawing of JY7222-ZQR Method of attachment: Riveted Photographs and/or drawings of the statutory plate (completed example with dimensions): See the drawing of JY7222-ZQR Location of the vehicle identification number: R, X1266 Y496 Z1020, See the drawing of JY7222-ZQR-02

113 Annex MID Test report No. 61JUA0001B page 12 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : Photographs and/or drawings of the locations of the vehicle identification number (completed example with dimensions): See the drawing of JY7222-ZQR The serial number of the type begins with: R1JJE27A?GJ B. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS N.A. C. GENERAL INFORMATION REGARDING CONFORMITY OF PRODUCTION AND ACCESS TO REPAIR AND MAINTENANCE INFORMATION Conformity of production Description of overall quality-assurance management systems: ISO 9001: Access to repair and maintenance information Address of principal website for access to vehicle repair and maintenance information: In the case of multi-stage type-approval, address of principal website for access to vehicle repair and maintenance information from manufacturer(s) at previous stage(s): N.A.

114 Annex MID Test report No. 61JUA0001B page 13 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : GENERAL CONSTRACTION CHARACTERISTICS 1.1. Photographs and/or drawings of a representative vehicle: Version 0: See the drawing of JY7222-ZQR-03 Version 1: See the drawing of JY7222-ZQR Scale drawing of the whole vehicle: Version 0: See the drawing of JY7222-ZQR-04 Version 1: See the drawing of JY7222-ZQR Number of axles and wheels: 2 axles /4wheels Axles with twinned wheels: N.A Powered axles: R (rear) 1.4. Chassis (if any) (overall drawing): Version 0: See the drawing of JY7222-ZQR-05 Version 1: See the drawing of JY7222-ZQR (L2e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C) Material used for the bodywork: Version 0: See the drawing of JY7222-ZQR-05 Version 1: See the drawing of JY7222-ZQR Position and arrangement of the propulsion(s): Rear transverse 1.7. (L4e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C) Hand of drive: Version 0:left/right/centre, Version 1: left/right/centre Vehicle is equipped to be driven in right/left-hand traffic and in countries that use metric/metric and imperial units: Version 0: Right-hand traffic and metric and imperial units. Version 1: Left-hand traffic and metric and imperial units Propulsion unit performance (L3e, L4e, L5e, L7e-A, L7e-B2) Declared maximum vehicle speed: N.A (L1e, L2e, L6e, L7e-B1, L7e-C) Maximum design vehicle speed: 78 km/h and gear in which it is reached: N.A Maximum net power combustion engine: N.A Maximum net torque combustion engine: N.A.

115 Annex MID Test report No. 61JUA0001B page 14 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : Maximum continuous-rated power electric motor (15/30 minutes power): 7.5 kw at 3050 min Maximum continuous-rated torque electric motor: 22.8 N.m at 3050 min Maximum continuous total power for propulsion(s): N.A Maximum continuous total torque for propulsion(s): N.A Maximum peak power for propulsion(s): 24.0 kw at 3500 min MASSES AND DIMENSIONS (in kg and mm.) refer to drawings where applicable 2.1. Range of vehicle mass (overall) Mass in running order: 448 kg Distribution of mass in running order between the axles: Front axle: Rear axle: 186 kg 262 kg Actual mass: 772 kg Distribution of actual mass between the axles: Front axle: Rear axle: 312 kg 460 kg Technically permissible maximum laden mass: 897 kg Technically permissible maximum mass on front axle: 342 kg Technically permissible maximum mass on rear axle: 555 kg (L4e) Technically permissible maximum mass on sidecar axle: N.A Maximum hill-starting ability at the maximum technically permissible mass declared by the manufacturer: 30% slope

116 Annex MID Test report No. 61JUA0001B page 15 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : Maximum pay mass declared by manufacturer: 125 kg Safe load carrying capacity of load platform declared by manufacturer: N.A Technically permissible maximum towable mass in case of: Braked: N.A., Unbraked: N.A Technically permissible maximum laden mass of the combination: N.A Technically permissible maximum mass at the coupling point: N.A Mass of the optional equipment: 40 kg Mass of the superstructure: N.A Mass of the propulsion battery: 215 kg (L2e, L4e, L5e, L6e, L7e) Mass of the doors: 18 kg* (L2e-U, L5e-B, L6e-BU, L7e-CU) Mass of the machines or equipment installed on the load platform area: N.A Mass of the gaseous fuel system as well as storage tanks for gaseous fuel: N.A Mass of the storage tanks to store compressed air: N.A Range of vehicle dimensions (overall) Length: Version 0: See the drawing of JY7222-ZQR-04 Version 1: See the drawing of JY7222-ZQR Width: Version 0: See the drawing of JY7222-ZQR-04 Version 1: See the drawing of JY7222-ZQR Height: Version 0: See the drawing of JY7222-ZQR-04 Version 1: See the drawing of JY7222-ZQR Wheelbase: Version 0: See the drawing of JY7222-ZQR-04 Version 1: See the drawing of JY7222-ZQR (L4e) Wheelbase sidecar: N.A Track width (L1e L7e if equipped with twinned wheels L2e, L4e, L5e, L6e, L7e) Track width front: Version 0: See the drawing of JY7222-ZQR-04 Version 1: See the drawing of JY7222-ZQR (L1e L7e if equipped with twinned wheels L2e, L4e, L5e, L6e, L7e) Track width rear: Version 0: See the drawing of JY7222-ZQR-04 Version 1: See the drawing of JY7222-ZQR-04-1

117 Annex MID Test report No. 61JUA0001B page 16 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : (L4e) Track width sidecar: N.A (L7e-B) Front overhang: N.A (L7e-B) Rear overhang: N.A Load platform dimensions (L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CU) Length of the load platform: N.A (L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CU) Width of load platform: N.A (L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CU) Height of load platform: N.A Centre of gravity (L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CU) Location of the centre of gravity forward of the rear axle Lcg: N.A (L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CU) Location of the centre of gravity above the ground plane Hcg: N.A (L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CU) Location centre of gravity of loaded platform forward of the rear axle LcgLP: N.A Miscellaneous dimensions (L7e-B2) Approach angle: N.A (L7e-B2) Departure angle: N.A (L7e-B2) Ramp angle: N.A (L7e-B2) Ground clearance under the front axle: N.A (L7e-B2) Ground clearance under the rear axle: N.A (L3e-AxE (x=1, 2 or 3), L3e-AxT (x=1, 2 or 3), L7e-B) Ground clearance between the axles: N.A (L7e-B) Wheelbase to ground clearance ratio: N.A (L7e-B2) Static stability coefficient Kst: N.A (L3e-AxE, L3e-AxT) Seat height: N.A (L3e-AxE, L3e-AxT) Ground clearance: N.A. 3. GENERAL POWERTRAIN CHARACTERISTICS 3.1. Manufacturer of the propulsion unit :

118 Annex MID Test report No. 61JUA0001B page 17 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : Combustion engine N.A Manufacturer: N.A Engine code (as marked on the engine or other means of identification): N.A Fuel identification marking (if available): N.A Electric motor Manufacturer: NANJING JIAYUAN SPECIAL ELECTRIC VEHICLES MANUFACTURE CO.,LTD Electric motor code (as marked on the engine or other means of identification): JYD Hybrid application: N.A Manufacturer: N.A Application code (as marked on the engine or other means of identification): N.A Fuel identification marking (if available): N.A Photographs and/or drawings of the location of the code(s) and/or type-approval numbers (completed example with dimensions): N.A Combustion engine : N.A Pure electric and hybrid electric propulsion and control Electric vehicle configuration: pure electric/hybrid electric/manpower electric: Brief description and schematic drawing of pure and hybrid electric propulsions and its control systems: Version 0: See the drawing of JY7222-ZQR-06 Version 1: See the drawing of JY7222-ZQR Electric propulsion motor Number of electric motors for propulsion: Type (winding, excitation): winding Operating voltage: 72 V /30 minutes power: 7.5kW at 3050 min Propulsion batteries Primary propulsion battery: Lead-acid battery Number of cells: 6

119 Annex MID Test report No. 61JUA0001B page 18 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : Mass: 35.8 kg/cell Capacity: 100 Ah (Amp-hours) Voltage: 72 V Position in the vehicle: See the drawing of JY7222-ZQR Secondary propulsion battery: N.A Hybrid electric vehicle: N.A Energy storage device Description: (battery, capacitor, flywheel/generator) Identification number: Kind of electrochemical couple: Electrolytic cell Energy (for battery: voltage and capacity Ah in 2h, for capacitor: J,..., for flywheel/generator: J,,): 100 Ah, 72 V Charger: on-board/external/without Electric motor (describe each type of electric motor separately) Primary use: propulsion motor/generator When used as propulsion motor: single-/multi-motors (number): Single-motor Working principle: Motor is the three-phase AC asynchronous motor, a electric drive device convert The electrical energy into mechanical energy, the basic component is the stator and rotor, stator windings produce a rotating magnetic field and cut rotor windings after obtained three-phase AC power from the drive, make the rotor winding induce electromotive force and induce current, generating an electromagnetic force in the stator rotating magnetic field effect, drive shaft rotation. The motor control mode in our company is frequency conversion closed-loop vector control, the basic principle is that the controller accept analog signals and motor Hall signals from the accelerator pedal, control the stator current vector of asynchronous motor, according to the principle of magnetic field-oriented, respectively control the field current and torque current of the asynchronous motor, according to SVPWM modulated the appropriate PWM signal which can drive the MOS tube work, output three-phase AC to the motor, so achieve to control the motor speed and torque purposes Direct current/alternating current/number of phases: Alternating current, 3 phases Separate excitation/series/compound: N.A Synchronous/asynchronous: Asynchronous

120 Annex MID Test report No. 61JUA0001B page 19 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : Electric motor control unit Identification number: JYK Power controller Identification number: JYK Other engines, electric motors or combinations (specific information concerning the parts of these motors) : N.A Cooling system (temperatures permitted by the manufacturer): N.A Liquid cooling: N.A Maximum temperature at outlet: N.A Air cooling: N.A Reference point: N.A Maximum temperature at reference point: N.A Lubrication system: N.A Description of lubrication system: N.A Location of oil reservoir (if any): N.A Feed system (pump/injection into induction system/mixed with the fuel, etc.): N.A Lubricant mixed with the fuel: N.A Percentage: N.A Oil cooler: yes/no N.A Drive-train control Brief description and schematic drawing of the vehicle drive-train and its control system Clutch (gear shift control, clutch control or any other element of drive-train): Version 0: See the drawing of JY7222-ZQR-08 Version 1: See the drawing of JY7222-ZQR Brief description and schematic drawing of the clutch and its control system: N.A Transmission

121 Annex MID Test report No. 61JUA0001B page 20 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : Brief description and schematic drawing of gear shift system(s) and its control: See the drawing of JY7222-ZQR Drawing of the transmission: See the drawing of JY7222-ZQR Type (mechanical, hydraulic, electric, manual/manual automated/automatic/cvt /other (indicate): electric, automatic A brief description of the electrical/electronic components (if any): See the drawing of JY7222-ZQR Location relative to the engine: Version 0: See the drawing of JY7222-ZQR-08 Version 1: See the drawing of JY7222-ZQR Method of control: by hand/foot Gear ratios Gear (L3e-AxE, L3e-AxT) Final drive ratio: N.A (L3e-AxE, L3e-AxT) Overall gear ratio in highest gear: N.A Safe-cornering device: (L1e L7e equipped with twinned wheels, L2e, L5e, L6e, L7e) Safe-cornering device: Annex VIII to Regulation (EU) No 168/2013: yes/ no: differential/other (L1e L7e equipped with twinned wheels, L2e, L5e, L6e, L7e) Differential lock: yes/no/optional Brief description and schematic drawing of the safe-cornering device, the differential lock and their control systems: See the drawing of JY7222-ZQR Suspension and control Internal transmission ratios (ratios of engine to transmission output shaft revolutions) Final drive ratio(s) (ratio of transmission output shaft to driven wheel revolutions) Total gear ratios Forward gear Reverse gear 1 6 6

122 Annex MID Test report No. 61JUA0001B page 21 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : Brief description and schematic drawing of suspension and its control system: See the drawing of JY7222-ZQR-12, JY7222-ZQR Drawing of the suspension arrangements: See the drawing of JY7222-ZQR-12, JY7222-ZQR Level adjustment: yes/ no/ optional Brief description of the electrical/electronic components: N.A Stabilisers: yes/ no/ optional Shock absorbers: yes/no/ optional 3.8. Passenger-compartment heating system and air-conditioning: Passenger-compartment heating system (L2e, L5e-B, L6e-B, L7e) An overall drawing of the heating system giving its location on the vehicle (and the arrangement of the sound damping devices (including the position of the heat exchange points)): Version 0: See the drawing of JY7222-ZQR Version 1: See the drawing of JY7222-ZQR (L2e, L5e-B, L6e-B, L7e) An overall drawing of the heat-exchanger used in systems utilising the heat from the exhaust gases, or of the parts where that exchange takes place (in the case of heating systems using the heat provided by the engine cooling air): Version 0: See the drawing of JY7222-ZQR Version 1: See the drawing of JY7222-ZQR (L2e, L5e-B, L6e-B, L7e) A sectional drawing of the heat-exchanger or parts where heat exchange takes place, together with a statement of the wall thickness, of the materials used and the characteristics of their surface: Version 0: See the drawing of JY7222-ZQR Version 1: See the drawing of JY7222-ZQR (L2e, L5e-B, L6e-B, L7e) Specifications regarding the method of manufacture and technical data relating to other major components of the heating system, such as the fan: Specifications of fan: Power: 35 W, Voltage: 12 V, Diameter: 82 mm Air-conditioning

123 Annex MID Test report No. 61JUA0001B page 22 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : (L2e, L5e-B, L6e-B, L7e) Brief description and schematic drawing of air-conditioning and its control system: Version 0: See the drawing of JY7222-ZQR Version 1: See the drawing of JY7222-ZQR (L2e, L5e-B, L6e-B, L7e) Gas used as refrigerant in the air-conditioning system: HFO-1234yf (L2e, L5e-B, L6e-B, L7e) The air-conditioning system is designed to contain fluorinated greenhouse gases with global warming potential higher than 150: yes/no. If yes, fill in the following sections: (L2e, L5e-B, L6e-B, L7e) Drawing and brief description of the air-conditioning system, including the reference or part number and material of the leak components:n.a (L2e, L5e-B, L6e-B, L7e) Leakage of the air-conditioning system: N.A (L2e, L5e-B, L6e-B, L7e) Reference or part number and material of the components of the system and test information (e.g. test report number, Type-approval number, etc.): N.A (L2e, L5e-B, L6e-B, L7e) Overall leakage/year of the entire system: N.A Cycles designed to pedal: N.A. 4. GENERAL INFORMATION ON ENVIRONMENTAL AND PROPULSION PERFORMANCE 4.0. General information on environmental and propulsion performance Environmental step: Euro 3 / 4 / 5 N.A Fuel consumption (provide details for each reference fuel tested): N.A CO 2 emissions: N.A Energy consumption: 106 Wh/km Electric range: 103 km 4.1. Tailpipe emission-control system: N.A Brief description and schematic drawing of the tailpipe emission-control system and its control system: N.A Catalytic converter: N.A.

124 Annex MID Test report No. 61JUA0001B page 23 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : Configuration, number of catalytic converters and elements (information to be provided for each separate unit): N.A Drawing with dimensions, shape and volume of the catalytic converter(s): N.A Catalytic reaction: N.A. * Total charge of precious metals: N.A. * Relative concentration: N.A. * Substrate (structure and material): N.A. * Cell density: N.A. * Casing for the catalytic converter(s): N.A Location of the catalytic converter(s) (place and reference distance in the exhaust line): N.A Catalytic heat-shield: N.A Brief description and schematic drawing of the regeneration system/ method of exhaust after-treatment systems and its control system: N.A. * Normal operating temperature range: N.A Consumable reagents: N.A Brief description and schematic drawing of the reagent flow (wet) system and its control system: N.A Type and concentration of reagent needed for catalytic action: N.A * Normal operational temperature range of reagent: N.A Frequency of reagent refill: N.A Identifying part number: N.A Oxygen sensor(s) Oxygen sensor component(s) drawing(s): N.A Drawing of exhaust device with oxygen sensor location(s) (dimensions relative to exhaust valves): N.A Control range(s): N.A Identifying part number(s): N.A Description of oxygen sensor heating system and heating strategy: N.A.

125 Annex MID Test report No. 61JUA0001B page 24 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : Oxygen sensor heat shield(s): N.A Secondary air-injection (air-inject in exhaust): N.A Brief description and schematic drawing of the secondary air-injection system and its control system: N.A Configuration (mechanical, pulse air, air pump ect.): N.A Working principle: N.A External exhaust gas recirculation (EGR): N.A Brief description and schematic drawing of EGR system (exhaust flow) and its control system: N.A Characteristics: N.A Water-cooled EGR system: N.A Air-cooled EGR system: N.A Particular filter: N.A PT component drawing with dimensions, shape and capacity of the particulate filter: N.A Design of the particulate filter: N.A Brief description and schematic drawing of the particulate filter and its control system: N.A Location (reference distance in the exhaust line): N.A Method or system of regeneration, description and drawing: N.A Identifying part number: N.A Lean NOx trap: N.A Operation principle of lean NOx trap: N.A Additional tailpipe emission-control devices (if any not covered under another heading): N.A Working principle: N.A Crankcase emission control system: N.A Configuration of crank-case gas recycling system (breather system, positive crank-case ventilation system, other) (description and drawings): N.A.

126 Annex MID Test report No. 61JUA0001B page 25 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : Evaporative emission control system: N.A Evaporative emission control system: N.A Drawing of the evaporative control system: N.A Drawing of the canister (including dimensions and indicating vent and purge mechanism): N.A Working capacity: N.A Adsorption material: N.A Housing material:n.a Schematic drawing of the fuel tank, indicating capacity and material: N.A Drawing of the heat-shield between tank and exhaust device: N.A Additional information on environmental and propulsion unit performance: N.A Description and/or schematic drawings of additional pollution-control devices: N.A Location of the coefficient of absorption symbol (compression-ignition engines only): N.A Applicable information document set out in respectively UN Regulation No 9, 41 or 63 shall supplement this information document with regard to the sound level: N.A Applicable information document set out in respectively UN Regulation No 92 shall supplement this information document with regards to the noise-abatement devices installed on the vehicle: N.A. 5. VEHICLE PROPULSION FAMILY: N.A To define the vehicle propulsion family, the manufacturer shall submit the information required for classification criteria set out in point 3 of Annex XI to Commission Delegated Regulation (EU) No 134/2014, if not already provided in the information document: N.A. 6. INFORMATION ON FUNCTIONAL SAFETY 6.1. Audible warning devices Summary description of device(s) used and their purpose: Electromagnetic horn Electro-magnetic horn Drawing(s) showing the location of the audible warning device(s) in relation to the structure of the vehicle: See the drawing of JY7222-ZQR-15

127 Annex MID Test report No. 61JUA0001B page 26 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : Details of the method of attachment, including the part of the vehicle structure to which the audible warning device(s) is (are) attached: See the drawing of JY7222-ZQR Electrical/pneumatic circuit diagram: See the drawing of JY7222-ZQR Voltage: AC/DC Rated voltage pressure: 12V Drawing of the mounting device: See the drawing of JY7221-ZQR Braking, including anti-lock and combined braking systems Characteristics of the brakes, including details and drawings of the drums, discs, hoses, make and type of shoe/pad assemblies and/or linings, effective braking areas, radius of drums, shoes or discs, mass of drums, adjustment devices, relevant parts of the axle(s) and suspension, levers, pedals: See the drawing of JY7222-ZQR-19, JY7222-ZQR-20, JY7222-ZQR-23 Version 0: See the drawing of JY7222-ZQR-17, JY7222-ZQR-18, JY7222-ZQR-21, JY7222-ZQR-22 Version 1: See the drawing of JY7222-ZQR-17-1, JY7222-ZQR-18-1, JY7222-ZQR-21-1, JY7222-ZQR Operating diagram, description and/or drawing of the braking system, including details and drawings of the transmission and controls as well as a brief description of the electrical and/or electronic components used in the braking system: Version 0: See the drawing of JY7222-ZQR-17 Version 1: See the drawing of JY7222-ZQR-17-1 The vehicle is fitted with electric regenerative braking system When vehicle is in driving, the electric energy of power battery convert into mechanical energy by the motor driving the vehicle, after the vehicle accelerator pedal is released, the controller can not receive the accelerator pedal switch signal, then default the vehicle automatically sliding, the vehicle inertia drive motor rotate freely, after the driver depressed the brake pedal, the brake signal is transmitted to the internal controller, then change control mode, the motor is in the anti-drag state at the moment, issued a three-phase alternating current (AC) into the interior of the controller by Mos tube and after commuted filter convert into direct current, DC voltage is higher than the battery pack voltage, reverse charge batteries Front, rear and sidecar brakes, disc and/or drum: See the drawing of JY7222-ZQR-19, JY7222-ZQR Parking braking system: Version 0: See the drawing of JY7222-ZQR-18 Version 1: See the drawing of JY7222-ZQR Any additional braking system: Any circuit of service brake system as secondary brake system, electric regenerative braking system

128 Annex MID Test report No. 61JUA0001B page 27 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : Vehicle is equipped to tow a trailer with no brake/overrun brake/electric/ pneumatic/hydraulic service brakes: N.A Anti-lock/Combined braking system Anti-lock braking system: yes/ no/ optional Combined braking system: yes/ no/ optional Anti-lock and combined braking system: yes/ no/ optional Schematic drawing(s): Version 0: See the drawing of JY7222-ZQR-17 Version 1: See the drawing of JY7222-ZQR Hydraulic reservoir(s) (volume and location): Version 0: See the drawing of JY7222-ZQR-21 Version 1: See the drawing of JY7222-ZQR Particular characteristics of the braking system(s) Brake shoes and/or pads: See the drawing of JY7222-ZQR-19, JY7222-ZQR Linings and/or pads (indicate make, type, grade of material or identification mark): See the drawing of JY7222-ZQR-19, JY7222-ZQR Brake levers and/or pedals: Version 0: See the drawing of JY7222-ZQR-17, JY7222-ZQR-18 Version 1: See the drawing of JY7222-ZQR-17-1, JY7222-ZQR Other devices (where applicable): drawing and description: N.A Electrical safety: Brief description of the power circuit components installation and drawings/photographs showing the location of the power circuit components installation: See the drawing of JY7222-ZQR Schematic diagram of all electrical functions included in power circuit: See the drawing of JY7222-ZQR Working voltage(s): 72 V Description of protection against electric-shocks:

129 Annex MID Test report No. 61JUA0001B page 28 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : 01 The protection against direct contact with live parts comply with the IPXXD or IPXXB requirements; the specific marking are provided; the protection against indirect contact with live parts comply with the requirements; isolation resistance shall comply with the requirements Fuse and/or circuit breaker: yes/no/optional Diagram showing the functional range: 5A/10A/15A/30A Configuration of power wiring harness: See the drawing of JY7222-ZQR Front and rear protective structures: N.A Glazing, windscreen wipers and washers, and defrosting and demisting systems: Windscreen (L2e, L5e, L6e, L7e) Materials used: See table (L2e, L5e, L6e, L7e) Method of mounting : Glue in fixed (L2e, L5e, L6e, L7e) Angle of inclination : (L2e, L5e, L6e, L7e) Windscreen accessories and the position in which they are fitted together with a brief description of any electrical/electronic components involved: See the drawing of JY7222-ZQR (L2e, L5e, L6e, L7e) Drawing of the windscreen with dimensions: Other windows See the drawing of JY7222-ZQR (L2e, L5e, L6e, L7e) Materials used: See table (L2e, L5e, L6e, L7e) A brief description of the electrical/electronic components (if any) of the window lifting mechanism : Opening roof glazing Using the keys on the control panel to control the elevator so as to drive the front door window operation (L2e, L5e, L6e, L7e) Materials used: See table Other glass panes N.A (L2e, L5e, L6e, L7e) Materials used: N.A Windscreen wiper(s):

130 Annex MID Test report No. 61JUA0001B page 29 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : (L2e, L5e, L6e, L7e) Detailed technical description (including photographs or drawings): Version 0: See the drawing of JY7222-ZQR-28 Version 1: See the drawing of JY7222-ZQR Windscreen washer: (L2e, L5e, L6e, L7e) Detailed technical description (including photographs or drawings): 6.8. Defrosting and demisting: See the drawing of JY7222-ZQR (L2e, L5e, L6e, L7e) Detailed technical description (including photographs or drawings): Version 0: See the drawing of JY7222-ZQR-14-01, JY7222-ZQR Version 1: See the drawing of JY7222-ZQR , JY7222-ZQR Driver-operated controls including identification of controls, tell- tales and indicators Arrangement and identification of controls, tell-tales and indicators: Version 0: See the drawing of JY7222-ZQR-30-01, JY7222-ZQR Version 1: See the drawing of JY7222-ZQR , JY7222-ZQR Photographs and/or drawings of the arrangement of symbols and controls, tell-tales and indicators: Version 0: See the drawing of JY7222-ZQR-30-01, JY7222-ZQR Version 1: See the drawing of JY7222-ZQR , JY7222-ZQR Controls, tell-tales and indicators for which, when fitted, identification is mandatory, including the identification symbols to be used for that purpose: See table Summary table: the vehicle is equipped with the following driver-operated controls, including indicators and tell-tales: See table Controls, tell-tales and indicators for which, when fitted, identification is optional, and symbols which shall be used if they are to be identified: See table Speedometer and odometer Speedometer Photographs and/or drawings of the complete system: Version 0: See the drawing of JY7222-ZQR-31 Version 1: See the drawing of JY7222-ZQR Vehicle speed range displayed: 0~80 km/h, 0~50 mph Tolerance of the measuring mechanism of the speedometer: 0~+2%

131 Annex MID Test report No. 61JUA0001B page 30 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : Technical constant of the speedometer: pulses per minute, the pointer indicates 78 km/h Method of operation and description of the drive mechanism: Wheel speed sensor-speedometer Overall transmission ratio of the drive mechanism: 41 pulses/ wheel turn Odometer Tolerance of the measuring mechanism of the odometer: 0~+2% Method of operation and description of the drive mechanism: Sensor-speedometer Installation of lighting, light-signaling devices, including automatic switching of lighting List of all devices (mentioning the number, make(s), type, component type- approval mark(s), the maximum intensity of the main-beam headlamps, colour, the corresponding tell-tale): See table Diagram showing the location of the lighting and light-signaling devices: Version 0: See the drawing of JY7222-ZQR-32 Version 1: See the drawing of JY7222-ZQR Hazard warning lamps: Version 0: See the drawing of JY7222-ZQR-32 Version 1: See the drawing of JY7222-ZQR Brief description of the electrical and/or electronic components used in the lighting system and in the light-signaling system: N.A For every lamp and reflector, supply the following information (in writing and/or by diagram): Drawing showing the extent of the illuminating surface: See lightings component type-approval Method used to define the apparent surface in accordance with point 2.10 of UNECE Regulation No 48 (OJ L 323, , p. 46): The light-emitting surface Axis of reference and centre of reference: See lighting component type-approval Method of operation of concealable lamps: N.A Description/drawing and type of headlamp leveling device (e.g. automatic, stepwise manually adjustable, continuously manually adjustable): Continuously manually adjustable

132 Annex MID Test report No. 61JUA0001B page 31 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : Control device: Screw Reference marks: N.A Marks assigned for loading conditions: N.A Rearward visibility Rear-view mirrors (stating for each mirror) Drawing(s) for the identification of the mirror showing the position of the mirror relative to the vehicle structure: Version 0: See the drawing of JY7222-ZQR-33-01, JY7222-ZQR Version 1: See the drawing of JY7222-ZQR , JY7222-ZQR Details of the method of attachment including that part of the vehicle structure to which it is attached Version 0: See the drawing of JY7222-ZQR-33-01, JY7222-ZQR Version 1: See the drawing of JY7222-ZQR , JY7222-ZQR A brief description of the electronic components of the adjustment system: By adjusting device on the dashboard to control both sides of the exterior mirrors inside the motor system,adjust the angle of the mirror to complete rear visibility Devices for indirect vision other than mirrors: N.A Description of the device: N.A In the case of a camera-monitor device, the detection distance (mm), contrast, luminance range, glare correction, display performance (black and white/colour), image repetition frequency, luminance reach of the monitor: N.A Sufficiently detailed drawings to identify the complete device, including installation instructions; the position for the EU type-approval mark has to be indicated on the drawings: N.A Rollover protective structure (ROPS): N.A Safety belts and/or other restraints: (L2e, L4e, L5e-B, L6e-B, L7e) Number and position of safety belts and restraint systems and seats on which they can be used, please fill out table below: See table (L2e, L4e, L5e-B, L6e-B, L7e) Description of a specific type of belt, with one anchorage attached to the seat back-rest or incorporating an energy-dissipation device: (L2e, L4e, L5e-B, L6e-B, L7e) Number and location of the anchorages:

133 Annex MID Test report No. 61JUA0001B page 32 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : 01 Version 0: See the drawing of JY7222-ZQR-34 Version 1: See the drawing of JY7222-ZQR (L2e, L4e, L5e-B, L6e-B, L7e) Brief description of electrical/electronic components: N.A Safety belt anchorages: (L2e, L4e, L5e-B, L6e-B, L7e) Photographs and/or drawings of the bodywork showing the true, effective location and dimensions of the anchorages, together with an indication of the R- point: Version 0: See the drawing of JY7222-ZQR-34 Version 1: See the drawing of JY7222-ZQR (L2e, L4e, L5e-B, L6e-B, L7e) Drawings of the anchorages and the parts of the vehicle structure to which they are attached (together with a statement on the nature of the materials used): See the drawing of JY7222-ZQR (L2e, L4e, L5e-B, L6e-B, L7e) Designation of the types of belts authorised for attachment to the anchorages on the vehicle: See table (L2e, L4e, L5e-B, L6e-B, L7e) Type-approval mark for each position: N.A (L2e, L4e, L5e-B, L6e-B, L7e) Special devices (example: seat-height adjustment, preloading device, ect.): N.A (L2e, L4e, L5e-B, L6e-B, L7e) Photographs and/or drawings of the bodywork showing the true, effective location and dimensions of the anchorages, together with an indication of the R- point: (L2e, L4e, L5e-B, L6e-B, L7e) Observation: N.A Seating positions (saddles and seats) Number of positions: 2 Version 0: See the drawing of JY7222-ZQR-34 Version 1: See the drawing of JY7222-ZQR (L2e, L5e, L6e, L7e) Location and arrangement: r1:1l, 1R Seating position configuration: seat/saddle Description and drawings of: The seats and their anchorages: See the drawing of JY7222-ZQR-36

134 Annex MID Test report No. 61JUA0001B page 33 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : The adjustment system: See the drawing of JY7222-ZQR The displacement and locking systems: See the drawing of JY7222-ZQR The seat-belt anchorages incorporated in the seat structure: N.A The parts of the vehicle used as anchorages: N.A (L2e, L4e, L5e-B, L6e-B, L7e) Coordinates or drawing of the R-point(s) of all seating positions: (L2e, L4e, L5e-B, L6e-B, L7e) Driver s seat: Version 0: See the drawing of JY7222-ZQR-39 Version 1: See the drawing of JY7222-ZQR (L2e, L4e, L5e-B, L6e-B, L7e) All other seating positions: Design torso angle: Driver s seat: 17.2º All other seating positions: 17.2º Range of seat adjustment: Driver s seat: 132 mm All other seating positions: 132 mm Steer-ability, cornering properties and turn-ability Version 0: See the drawing of JY7222-ZQR-39 Version 1: See the drawing of JY7222-ZQR Schematic diagram of steered axle(s) showing steering geometry: Version 0: See the drawing of JY7222-ZQR-40 Version 1: See the drawing of JY7222-ZQR Transmission and control of steering Configuration of steering transmission (specify for front and rear): Rack and pinion for front axle Linkage to wheels (including other than mechanical means; specify for front and rear): Direct, steering wheel with leverage for steering of the front wheels A brief description of the electrical/electronic components: N.A.

135 Annex MID Test report No. 61JUA0001B page 34 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : Diagram of the steering transmission: Version 0: See the drawing of JY7222-ZQR-41 Version 1: See the drawing of JY7222-ZQR (L2e, L5e, L6e, L7e) Schematic diagram(s) of the steering control(s): Version 0: See the drawing of JY7222-ZQR-41 Version 1: See the drawing of JY7222-ZQR (L2e, L5e, L6e, L7e) Range and method of adjustment of the steering control(s): Version 0: See the drawing of JY7222-ZQR-41 Version 1: See the drawing of JY7222-ZQR (L2e, L5e, L6e, L7e) Method of assistance: N.A Maximum steering angle of the wheels To the right: Version 0: See the drawing of JY7222-ZQR-40 Version 1: See the drawing of JY7222-ZQR-40-1 number of turns of the steering wheel (or equivalent data): To the left: Version 0: See the drawing of JY7222-ZQR-40 Version 1: See the drawing of JY7222-ZQR-40-1; number of turns of the steering wheel (or equivalent data): Tyres/wheels combination: Tyres: Size designation Axle 1: See table Axle 2: See table (L4e) Sidecar wheel: N.A Minimum load-capacity index: Front: 47 Rear: Minimum-speed category symbol compatible with the theoretical maximum design vehicle speed: F Tyre pressure(s) as recommended by the vehicle manufacturer: See table 6.18

136 Annex MID Test report No. 61JUA0001B page 35 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : Wheels: Rim size(s): See table Categories of use compatible with the vehicle: Normal Nominal rolling circumference: See table Vehicle maximum speed limitation plate and its location on the vehicle: N.A Vehicle occupant protection, including interior fittings and vehicle doors: Bodywork (L2e, L5e-B, L6e-B, L7e) Materials used and methods of construction: Occupant doors, latches and hinges Sheet metal and square tube, Non-load type body (L2e, L5e, L6e, L7e) Number of doors, and its configuration, dimensions and maximum angle of opening: 1R, 1L See the drawing of JY7222-ZQR (L2e, L5e, L6e, L7e) Drawing of latches and hinges and of their position in the doors: See the drawing of JY7222-ZQR (L2e, L5e, L6e, L7e) Technical description of latches and hinges: See the drawing of JY7222-ZQR (L2e, L5e, L6e, L7e) Details, including dimensions, of entrances, steps and necessary handles where applicable: N.A Interior protection for occupants (L2e, L5e, L6e, L7e) Photographs, drawings and/or an exploded view of the interior fittings, showing the parts in the passenger compartment and the materials used (with the exception of interior rear view mirrors, arrangement of controls, seats and the rear part of seats), roof and opening roof, backrest: Head restraints Version 0: See the drawing of JY7222-ZQR-44 Version 1: See the drawing of JY7222-ZQR (L2e, L5e, L6e, L7e) Head restraints: integrated/detachable/separate (L2e, L5e, L6e, L7e) Detailed description of the head restraint, specifying in

137 Annex MID Test report No. 61JUA0001B page 36 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : 01 particular the nature of the padding material or materials and, where applicable, the position and specifications of the braces and anchorage pieces for the type of seat for which approval is sought: See the drawing of JY7222-ZQR (L2e, L5e, L6e, L7e) In the case of a separate had restraint : N.A (L2e, L5e, L6e, L7e) Detailed description of the structural zone to which the head restraint is intended to be fixed: N.A (L2e, L5e, L6e, L7e) Scale drawings of the significant parts of the structure and the head restraint: N.A Maximum continuous total power and/or maximum vehicle speed limitation by design: 78 km/h Propulsion and/or drive-train output governors: Number (minimum two, exemption L3e-A3 and L4e-A3): Two How is the redundancy of governors ensured : 1.Controller speed limited: The motor controller uses the vector torque control, has a high precision controlling the motor speed, the motor speed error is ± 10rpm, since the diameter of the wheel and single-stage reduction gear ratio must be certain such that the vehicle speed is controlled within a certain value. 2.Wheel speed sensor limited: In the vehicle driving process, the front wheel is equipped with wheel speed sensor measures the current wheel speed, the analog signal will be sent to the instrument, and the instrument has a corresponding execution signal, when the motor speed control failure, the vehicle speed exceeds the limit raised value, performs the signal output and the motor controller power protection, speed is under control, when the speed is lower than the limit value, power protection is canceled, the vehicle can have the normal running Nominal cut-off point no 1: Engine/motor/drive-train rotation speed at which cut-off starts under load: 5000 min Maximum rotation speed at the minimum engine load: 5000 min Nominal cut-off point no 2: Engine/motor/drive-train rotation speed at which cut-off starts under load: 5000 min Maximum rotation speed at the minimum engine load: 5000 min The stated purpose of governor(s): maximum design vehicle speed limitation/maximum power limitation/engine over-speed protection

138 Annex MID Test report No. 61JUA0001B page 37 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : INFORMATION ON VEHICLE CONSTRUCTION 7.1. Coupling devices and attachments: N.A L-category vehicle equipped with coupling device: yes/no/optional N.A Guidelines and information for consumers in all EU languages regarding the impact on the driveability of using a trailer with an L-category vehicle included in the owner's manual: yes/no N.A For coupling-device approved as separate technical unit: installation and operating instructions added to documentation: yes/no N.A Photographs and/or drawings showing the position and the construction of the couplingdevices: yes/no N.A Instructions for attaching the coupling-type to the vehicle and photographs or drawings of the fixing points on the vehicle as stated by the manufacturer; additional information, if the use of the coupling-type is restricted to certain variants or versions of the vehicle type: N.A Attachment points for a secondary coupling and/or breakaway cable (drawings and pictures may be used as appropriate): yes/no N.A Devices to prevent unauthorised use Protective device Summary description of protective device(s) used: Steering lock acting positively on the steering at the same time the device switching off engine of the vehicle. See the drawing of JY7222-ZQR Vehicle immobiliser: N.A Technical description of the vehicle immobiliser and of the measures taken against inadvertent activation: N.A Alarm system: N.A Description of the alarm system and of the vehicle parts involved in its installation: N.A List of the main components comprising the alarm system: N.A Electromagnetic compatibility (EMC) Requirements under UNECE Regulation No 10 (OJ L 254, , p. 1) are met with relevant documentation included in the information document: N.A Table or drawing of radio-interference control equipment: See the drawing of JY7222-ZQR-47

139 Annex MID Test report No. 61JUA0001B page 38 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : Particulars of the nominal value of the direct-current resistance, and, in the case of resistive ignition cables, of their nominal resistance per metre: Lead: 167Ω/m 7.4. External projections (L1e-L7e vehicles with bodywork) General arrangement (drawing or photographs accompanied if necessary by dimensional details and/or text) indicating the position of the attached sections and views, of any parts of the exterior surface which can be regarded as critical for external projections, for example, and where relevant: bumpers, floor line, door and window pillars, air-intake grilles, radiator grille, windscreen wipers, rain gutter channels, handles, slide rails, flaps, door hinges and locks, hooks, eyes, winches, decorative trim, badges, emblems and recesses and any other parts of the exterior surface which can be regarded as critical (e.g. lighting equipment): Version 0: See the drawing of JY7222-ZQR-48 Version 1: See the drawing of JY7222-ZQR Fuel storage N.A On-board diagnostics (OBD) functional requirements On-board diagnostics system Stage I: yes/no, and/or Stage II: yes/no OBD system general information (L3e-L7e) Written description and/or drawing of the malfunction indicator (MI): N.A (L3e-L7e) List and purpose of all components monitored by the OBD system: N.A (L3e-L7e) Written description (general working principles) for all OBD stage I circuit (open circuit, shorted low and high, rationality) and electronics (PCU/ECU internal and communication) diagnostics: N.A (L3e-L7e) Written description (general working principles) for all OBD stage I diagnostic triggering any operating mode which significantly reduces engine torque in case of fault detection: N.A (L3e-L7e) Written description of the communication protocol(s) supported: N.A.

140 Annex MID Test report No. 61JUA0001B page 39 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : (L3e-L7e) Physical location of diagnostic-connector (add drawings and photographs): N.A (L3e-L7e) Written description in case of voluntary compliance with OBD stage II (general working principles): N.A (L3e-L7e) Positive-ignition engines: N.A (L3e-L7e) Catalyst monitoring: N.A (L3e-L7e) Misfire detection: N.A (L3e-L7e) Oxygen sensor monitoring: N.A (L3e-L7e) Other components monitored by the OBD system: N.A (L3e-L7e) Compression-ignition engines: N.A (L3e-L7e) Catalyst monitoring: N.A (L3e-L7e) Particulate filter monitoring: N.A (L3e-L7e) Electronic fuelling system monitoring: N.A (L3e-L7e) denox system monitoring: N.A (L3e-L7e) Other components monitored by the OBD system: N.A (L3e-L7e) Criteria for MI activation (fixed number of driving cycles or statistical method): N.A (L3e-L7e) List of all OBD output codes and formats used (with explanation of each): N.A OBD compatibility The following additional information shall be provided by the vehicle manufacturer to enable the manufacture of OBD-compatible replacement or service parts, diagnostic tools and test equipment (L3e-L7e) A comprehensive document describing all sensed components concerned with the strategy for fault detection and MI activation (fixed number of driving cycles or statistical method). This shall, include a list of relevant secondary sensed parameters for each component monitored by the OBD system. The document shall also list all OBD output codes and formats (with an explanation of each) used in association with individual emission- related powertrain components and individual non-emission-related components, where monitoring the component is used to determine MI activation. This shall contain, in particular, a comprehensive explanation for the data given in service $05 Test ID $ 21 to FF and the data given in service $06: N.A.

141 Annex MID Test report No. 61JUA0001B page 40 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : (L3e-L7e) For vehicle types using a communication link in accordance with ISO Road vehicles, diagnostics on controller area network (CAN) Part 4: requirements for emissions-related systems, the manufacturer shall provide a comprehensive explanation for the data given in service $06 Test ID $00 to FF, for each OBD monitor ID supported: N.A (L3e-L7e) The information required above may be provided in table form as described below: N.A (L3e-L7e) Description of ETC diagnostic fault codes: N.A Communication protocol information The following information shall be referenced to a specific vehicle make, model and variant, or identified using other workable definitions such as VIN or vehicle and systems identification (L3e-L7e) Any protocol information system needed to enable complete diagnostics in addition to the standards prescribed in point 3.8. of Appendix 1 to Annex XII to Commission Delegated Regulation (EU) No 44/2014, such as additional hardware or software protocol information, parameter identification, transfer functions, keep alive requirements, or error conditions N.A (L3e-L7e) Details of how to obtain and interpret all fault codes not in accordance with the standards prescribed in point of Appendix 1 to Annex XII to Commission Delegated Regulation (EU) No 44/2014: N.A (L3e-L7e) A list of all available live data parameters including scaling and access information: N.A (L3e-L7e) A list of all available functional tests including device activation or control and the means to implement them: N.A (L3e-L7e) Details of how to obtain all component and status information, time stamps, pending DTC and freeze frames: N.A (L3e-L7e) PCU/ECU identification and variant coding: N.A (L3e-L7e) Details of how to reset service lights: N.A.

142 Annex MID Test report No. 61JUA0001B page 41 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : (L3e-L7e) Location of diagnostic connector and connector details: N.A (L3e-L7e) Engine code identification: N.A Test and diagnosis of OBD monitored components (L3e-L7e) A description of tests to confirm its functionality, at the component or in the harness: N.A Passenger handholds and footrests: N.A Handholds: N.A Configuration: strap and/or handle: N.A Photographs and/or drawings showing the location and the construction: Footrests: N.A Photographs and/or drawings showing the location and the construction: : N.A Registration plate space Location of rear registration plate (indicate variants where necessary; drawings may be used as appropriate): See the drawing of JY7222-ZQR Height above road surface, upper edge: See the drawing of JY7222-ZQR Height above road surface, lower edge: See the drawing of JY7222-ZQR Distance of the centre line from the longitudinal median plane of the vehicle: See the drawing of JY7222-ZQR Dimensions (length x width): See the drawing of JY7222-ZQR Inclination of the plane to the vertical: See the drawing of JY7222-ZQR Angle of visibility in the horizontal plane: 7.9. Stands: N.A. To the left and to the right of the plate of 30 and more.

143 Annex MID Test report No. 61JUA0001B page 42 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : 01 Table 6.5. List of all glazing Glazing Make Approval number Material Windscreen YOUJIA E4 43R Ordinary laminated-glass Front door glazing TZYG E13*43R00*43R00*6061 Uniformly toughened glass panes Rear door glazing Quarter glazing YOUJIA E4 43R Uniformly toughened glass panes Back door glazing YOUJIA E4 43R Uniformly toughened glass panes Opening roof glazing YOUJIA E4 43R Ordinary laminated-glass

144 Annex MID Test report No. 61JUA0001B page 43 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : 01 Symbol No. Table Controls, tell-tales and indicators for which, when fitted, identification is mandatory, and symbols to be used for that purpose Device Control /indicator available (*) Identified by symbol(*) Where (**) Tell-tale available (*) Identified by symbol(*) 1 Maser light x x d Driving beam head x x d x x d lamps 3 Passing beam head x x d lamps 4 Position (side) lamps x x d x x d 5 Front fog lamps Rear fog lamps x x d x x d 7 Headlamp leveling device 8 Parking lamps Direction indicators x x d x x d 10 Hazard warning x x d x x d 11 Windscreen wiper Windscreen washer Windscreen wiper and washer Headlamp cleaning device Windscreen demisting and defrosting Rear window demisting and defrosting Where (**) x x d x x d x x d Ventilating fan x x d Diesel pre-heat Choke Brake failure x x d 21 Fuel level Battery charging condition Engine coolant temperature Malfunction indicator light (MI) (*) x = yes - = no or not separately available o = optional (**) d = directly on control, indicator or tell-tale c = in close vicinity x x d x x d

145 Annex MID Test report No. 61JUA0001B page 44 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : 01 Symbol No. Table Controls, tell-tales and indicators for which, when fitted, identification is optional, and symbols which shall be used if they are to be identified Device Control /indicator available (*) Identified by symbol(*) Where (**) Tell-tale available (*) Identified by symbol(*) 1 Parking brake x x d 2 Rear window wiper Rear window washer 4 Rear window wiper and washer 5 Intermittent windscreen wiper 6 Audible warning x x d device (horn) 7 Front hood (bonnet) Rear hood (boot) x x d Seat belt x x d 10 Engine oil pressure Unleaded petrol Neutral indicator x x d x x d 13 Optical warning device 14 Supplemental engine stop control Off 15 Supplemental engine stop control Run Where (**) x Gear position x x d x x d 17 Momentary x x d indication 18 Exterior rear-viewmirror x x d heating 19 Exterior rear-viewmirror x x d adjustment 20 Air conditioning x x d system 21 Window lift, poweroperated x x d (*) x = yes - = no or not separately available o = optional (**) d = directly on control, indicator or tell-tale c = in close vicinity

146 Annex MID Test report No. 61JUA0001B page 45 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : 01 Table List of all devices (mentioning the number, make(s), type, component type- approval mark(s), the maximum intensity of the main-beam headlamps, colour, the corresponding tell-tale) Version 0 DEVICES QTY/Color Tell-tale Max. intensity Make Type Approval number Driving beam 53750cd headlamp 2/white Blue (12.5) E4-112R Passing beam 2/white / / headlamp / E4-112R Front Position Lamp 2/white Green / E4-7R Front Direction Indicators 2/amber Green / E4-6R Daytime Running Lamp 2/white / / / E4-87R Rear Direction Indicators 2/amber Green / E4-6R Rear Position Lamp 2/red Green / / E4-7R Stop Lamp 2/red / / E4-7R Rear retro-reflector 2/red / / E4-3R Rear Fog Lamp 1/red Amber / E4-38R Reversing Lamp 1/white / / E4-23R Rear Registration Plate Lamp 1/white Green / E4-4R Side retro-reflector 2/amber / / GS-RF5950 E4-3R Version 1 DEVICES QTY/Color Tell-tale Max. intensity Make Type Approval number Driving beam 53750cd headlamp 2/white Blue (12.5) E4-112R Passing beam 2/white / / E4-112R headlamp / Front Position 2/white Green / E4-7R Lamp Front Direction Indicators 2/amber Green / E4-6R Daytime Running Lamp 2/white / / / E4-87R Rear Direction Indicators 2/amber Green / E4-6R Rear Position Lamp 2/red Green / / E4-7R Stop Lamp 2/red / / E4-7R Rear retro-reflector 2/red / / E4-3R Rear Fog Lamp 1/red Amber / E4-38R Reversing Lamp 1/white / / E4-23R Rear Registration Plate Lamp 1/white Green / E4-4R Side retro-reflector 2/amber / / GS-RF5950 E4-3R

147 Annex MID Test report No. 61JUA0001B page 46 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : 01 Row of seat First row of seats Second row of seats L = left, C = centre, R = right Table Safety belt configuration and associated information Location Complete EU typeapproval mark Variant, if applicable Belt adjustment device for height (indicate yes/no/optional) L E4-16R no C R E4-16R no L C R

148 Annex MID Test report No. 61JUA0001B page 47 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : 01 First row of seats Table Safety-belt anchorage configuration and associated information Anchorage location Vehicle structure Seat structure outboard Ar Lower anchorages Right-hand seat inboard Ar Upper anchorages Ar right Lower anchorages Centre seat left Upper anchorages outboard Ar Lower anchorages Left-hand seat inboard Ar Upper anchorages Ar Second row of seats outboard Lower anchorages Right-hand seat inboard Upper anchorages right Lower anchorages Centre seat left Upper anchorages outboard Lower anchorages Left-hand seat inboard Upper anchorages A : for a three-point belt B : for a lap belt S : for special types of belt, in this case provide specific information of the nature of these types under observations in point Ar, Br, Sr : for a belt incorporating an inertia reel Are, Bre, Sre : for a belt equipped with an inertia reel and an energy-absorption device of at least one anchorage Table Tyres/wheels combination Axle Type approval number Dimension Max. loading Speed Category Rims Nominal rolling circumference Tyre pressure Front E4-30R /70R12 69 T 12x mm 250 kpa Rear E4-30R /70R12 69 T 12x5 1549mm 250 kpa Front E4-30R /70R12 69 T 12x mm 250 kpa Rear E4-30R /70R12 69 T 12x mm 250 kpa Front E4-30R /70R12 69 Q 12x mm 250 kpa Rear E4-30R /70R12 69 Q 12x mm 250 kpa Front E /70R12 69 N 12x mm 250 kpa Rear E /70R12 69 N 12x mm 250 kpa

149 Annex MID Test report No. 61JUA0001B page 48 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : 01 INDEX OF DRAWINGS Drawing No JY7222-ZQR-01 JY7222-ZQR-02 JY7222-ZQR-03 JY7222-ZQR-03-1 JY7222-ZQR-04 JY7222-ZQR-04-1 JY7222-ZQR-05 JY7222-ZQR-05-1 JY7222-ZQR-06 JY7222-ZQR-06-1 JY7222-ZQR-07 JY7222-ZQR-08 JY7222-ZQR-08-1 JY7222-ZQR-09 JY7222-ZQR-10 JY7222-ZQR-11 JY7222-ZQR-12 JY7222-ZQR-13 JY7222-ZQR JY7222-ZQR JY7222-ZQR JY7222-ZQR JY7222-ZQR-15 JY7222-ZQR-16 JY7222-ZQR-17 JY7222-ZQR-17-1 JY7222-ZQR-18 JY7222-ZQR-18-1 JY7222-ZQR-19 JY7222-ZQR-20 JY7222-ZQR-21 JY7222-ZQR-21-1 JY7222-ZQR-22 JY7222-ZQR-22-1 JY7222-ZQR-23 JY7222-ZQR-24 JY7222-ZQR-25 JY7222-ZQR-26 JY7222-ZQR-27 JY7222-ZQR-28 JY7222-ZQR-28-1 JY7222-ZQR-29 JY7222-ZQR Drawing description Manufacturer s Statutory Plate Vehicle Identification Number Photos of A Representative Vehicle Photos of A Representative Vehicle Dimension Measured on Vehicle Dimension Measured on Vehicle Chassis Chassis Pure electric propulsions and Control System Pure electric propulsions and Control System Location of the propulsion batteries Drive-train and Its Control System Drive-train and Its Control System Gear shift system(s) and its control Transmission Differential Front suspension Rear suspension Passenger-compartment heating system Passenger-compartment heating system Air-conditioning Air-conditioning Location of The Audible Warning Device(s) Electrical Circuit Diagram Brake System Brake System Parking brake Parking brake Front Brake Rear Brake Master cylinder and Booster Master cylinder and Booster Wheel speed sensor Wheel speed sensor Calculation of brake performance Power circuit components installation Power wiring harness Windscreen accessories and position Windscreen with dimensions Windscreen wiper(s) Windscreen wiper(s) Windscreen washer Controls Telltales and Indicators

150 Annex MID Test report No. 61JUA0001B page 49 of 137 Type:JY7222-ZQR Appendix 4 Date : Dec Ext. : 01 JY7222-ZQR JY7222-ZQR JY7222-ZQR JY7222-ZQR-31 JY7222-ZQR-31-1 JY7222-ZQR-32 JY7222-ZQR-32-1 JY7222-ZQR JY7222-ZQR JY7222-ZQR JY7222-ZQR JY7222-ZQR-34 JY7222-ZQR-34-1 JY7222-ZQR-35 JY7222-ZQR-36 JY7222-ZQR-37 JY7222-ZQR-38 JY7222-ZQR-39 JY7222-ZQR-39-1 JY7222-ZQR-40 JY7222-ZQR-40-1 JY7222-ZQR-41 JY7222-ZQR-41-1 JY7222-ZQR-42 JY7222-ZQR-43 JY7222-ZQR-44 JY7222-ZQR-44-1 JY7222-ZQR-45 JY7222-ZQR-46 JY7222-ZQR-47 JY7222-ZQR-48 JY7222-ZQR-48-1 JY7222-ZQR-49 Controls Telltales and Indicators Controls Telltales and Indicators Controls Telltales and Indicators Speedometer Speedometer Location of Lights Location of Lights Location of Rear View Mirror Location of Rear View Mirror Location of Rear View Mirror Location of Rear View Mirror True, effective location and dimensions of the anchorages True, effective location and dimensions of the anchorages The anchorages and the parts of the vehicle structure to which they are attached Seats and their anchorages Seats adjustment system Seats displacement and locking systems R-point(s) of all seating positions R-point(s) of all seating positions Steering geometry Steering geometry Steering equipment Steering equipment Doors Latches and hinges Interior fittings Interior fittings Head restraints Protective device Radio-interference control equipment: External projections External projections Registration Plate

151 Annex MID Test report No. 61JUA0001B page 50 of 137

152 Annex MID Test report No. 61JUA0001B page 51 of 137

153 Annex MID Test report No. 61JUA0001B page 52 of 137 e13*168/2013*00060*01 Société Nationale de Certification et d'homologation L-5201 SANDWEILER (Luxembourg) Organisme accrédité OLAS ISO/IEC Accréditation N 5/001 (Portée communiquée sur demande) Version 0 Vehicle Type JY7222-ZQR Photos of A Representative Vehicle Drawing No. JY7222-ZQR-03

154 Annex MID Test report No. 61JUA0001B page 53 of 137 Version 1 Vehicle Type JY7222-ZQR Photos of A Representative Vehicle Drawing No. JY7222-ZQR-03-1

155 Annex MID Test report No. 61JUA0001B page 54 of 137

156 Annex MID Test report No. 61JUA0001B page 55 of 137

157 Annex MID Test report No. 61JUA0001B page 56 of 137

158 Annex MID Test report No. 61JUA0001B page 57 of 137

159 Annex MID Test report No. 61JUA0001B page 60 of 137

160 Annex MID Test report No. 61JUA0001B page 63 of V- 60V+ Electric Motor Controller U V W Transmission Differential Verhicle Type JY7222-ZQR Gear shift system(s) and its control Drawing No. JY7222-ZQR-9

161 Annex MID Test report No. 61JUA0001B page 64 of 137 Rotation Horizontalmounting position Verhicle Type JY7222-ZQR Transmission Drawing No. JY7222-ZQR-10

162 Annex MID Test report No. 61JUA0001B page 65 of 137 Verhicle Type JY7222-ZQR Differential Drawing No. JY7222-ZQR-11

163 Annex MID Test report No. 61JUA0001B page 66 of ± ±0.1 Ø12 26 Ø91 43±0.05 Materical:Steel Verhicle Type JY7222-ZQR Front Suspension Drawing No. JY7222-ZQR-12

164 Annex MID Test report No. 61JUA0001B page 67 of 137 Ø ±3 Ø Ø31 Ø39 Materical:Steel Verhicle Type JY7222-ZQR Rear Suspension Drawing No. JY7222-ZQR-13

165 Annex MID Test report No. 61JUA0001B page 68 of 137 Version 0 Front Air outlet Passenger-compartment heating system Air outlet 295 Air duct 690 Fan heater dimension Passenger-compartment heating system Verhicle Type JY7222-ZQR Passenger-compartment heating system Drawing No. JY7222-ZQR-14-01

166 Annex MID Test report No. 61JUA0001B page 69 of 137

167 Annex MID Test report No. 61JUA0001B page 70 of 137 Version 0 Air-conditioning evaporation tank Air-conditioning Compressor 448 Air duct 806 Air-conditioning condenser Air-conditioning Verhicle Type JY7222-ZQR Air-conditioning Drawing No. JY7222-ZQR-14-02

168 Annex MID Test report No. 61JUA0001B page 71 of 137

169 Annex MID Test report No. 61JUA0001B page 72 of 137

170 Annex MID Test report No. 61JUA0001B page 73 of 137 Horn

171 Annex MID Test report No. 61JUA0001B page 74 of 137

172 Annex MID Test report No. 61JUA0001B page 75 of 137

173 Annex MID Test report No. 61JUA0001B page 76 of 137

174 Annex MID Test report No. 61JUA0001B page 77 of 137

175 Annex MID Test report No. 61JUA0001B page 78 of mm

176 Annex MID Test report No. 61JUA0001B page 79 of 137

177 Annex MID Test report No. 61JUA0001B page 80 of 137

178 Annex MID Test report No. 61JUA0001B page 81 of 137

179 Annex MID Test report No. 61JUA0001B page 82 of 137

180 Annex MID Test report No. 61JUA0001B page 83 of 137

181 Annex MID Test report No. 61JUA0001B page 84 of 137 Vehicle Type JY7222-ZQR Calculation Of Brake Performance Drawing No. JY7222-ZQR-23

182 Annex MID Test report No. 61JUA0001B page 85 of 137 NO. NAME NO. NAME Rear Group Lamp Car Audio Front Group Lamp Emergency Stop Swicth Daytime Running Lamp MP5 DC-DC Horn Accelerator Pedal Car Audio Windscreen Wiper Ignition Lock Speedometer Car Central Panel Central Lock Controller Car Charger Rear Fog Lamp/Reversing Lamp Controller License Plate Lamp Electrical Motor Reading Lamp Group Switch Cigarette Lighting Outside Rearview Mirror Outside Rearview Mirror Adjustment Air Conditioning Terminal Block

183 Annex MID Test report No. 61JUA0001B page 86 of 137

184 Annex MID Test report No. 61JUA0001B page 87 of 137

185 Annex MID Test report No. 61JUA0001B page 88 of 137 NOTE:Here is for outside view JIA YUAN 4 E001521

186 Annex MID Test report No. 61JUA0001B page 89 of 137 Wiper nozzle axonometric dawing A A A-A 5:1 A

187 Annex MID Test report No. 61JUA0001B page 90 of 137

188 Annex MID Test report No. 61JUA0001B page 91 of 137

189 Annex MID Test report No. 61JUA0001B page 92 of 137 Version 0 Rear Fog Lamp Harzard Warning Signal Switch Power Switch Heat System Electric mirror adjustment L R Dipped Beam Direction indicator Windscreen Washer Switch Horn OFF OFF LO HI PUSH WASH Position Lamp Main Beam Windscreen Wiper Switch

190 Annex MID Test report No. 61JUA0001B page 93 of 137

191 Annex MID Test report No. 61JUA0001B page 94 of 137 Version 0 Steering Wheel Speedometer MP5 Electric mirror adjustment Power Switch Car Central Panel

192 Annex MID Test report No. 61JUA0001B page 95 of 137

193 Annex MID Test report No. 61JUA0001B page 96 of 137 Speedometer 12V 0V single 60V- 60V+ Controller U V W

194 Annex MID Test report No. 61JUA0001B page 97 of 137

195 Annex MID Test report No. 61JUA0001B page 98 of 137

196 Annex MID Test report No. 61JUA0001B page 99 of 137

197 Annex MID Test report No. 61JUA0001B page 100 of 137

198 Annex MID Test report No. 61JUA0001B page 101 of 137

199 Annex MID Test report No. 61JUA0001B page 102 of 137

200 Annex MID Test report No. 61JUA0001B page 103 of 137

201 Annex MID Test report No. 61JUA0001B page 104 of 137

202 Annex MID Test report No. 61JUA0001B page 105 of 137

203 Annex MID Test report No. 61JUA0001B page 106 of 137 3:1 3:1

204 Annex MID Test report No. 61JUA0001B page 107 of 137

205 Annex MID Test report No. 61JUA0001B page 108 of 137

206 Annex MID Test report No. 61JUA0001B page 109 of 137

207 Annex MID Test report No. 61JUA0001B page 110 of 137

208 Annex MID Test report No. 61JUA0001B page 111 of 137

209 Annex MID Test report No. 61JUA0001B page 112 of 137

210 Annex MID Test report No. 61JUA0001B page 113 of 137

211 Annex MID Test report No. 61JUA0001B page 114 of 137

212 Annex MID Test report No. 61JUA0001B page 115 of 137

213 Annex MID Test report No. 61JUA0001B page 116 of 137 CCAP 丹阳江菱灯具厂

214 Annex MID Test report No. 61JUA0001B page 117 of 137

215 Annex MID Test report No. 61JUA0001B page 118 of 137 e13*168/2013*00060*01 Société Nationale de Certification et d'homologation L-5201 SANDWEILER (Luxembourg) Organisme accrédité OLAS ISO/IEC Accréditation N 5/001 (Portée communiquée sur demande)

216 Annex MID Test report No. 61JUA0001B page 119 of 137 e13*168/2013*00060*01 Société Nationale de Certification et d'homologation L-5201 SANDWEILER (Luxembourg) Organisme accrédité OLAS ISO/IEC Accréditation N 5/001 (Portée communiquée sur demande)

217 Annex MID Test report No. 61JUA0001B page 120 of 137

218 IG1 A Annex MID Test report No. 61JUA0001B page 121 of 137 B

219 Annex MID Test report No. 61JUA0001B page 122 of 137 NO NAME Front Group Lamp Emergency Stop Swicth Danyang Jincheng Accessories Co.,Ltd Daytime Running Lamp MP5 JIAYUAN DC-DC Enpower Horn Kailing Accelerator Pedal HEBEI HWAT AUTOMOBILE COMPONENTS CO.,LTD Car Audio Changzhou HuaYin Electronic Co.,Ltd Windscreen Wiper Leqing Tongshun Automobile Parts Co.,Ltd Ignition Lock KAIYANG Speedometer JIAYUAN Car Central Panel HONGJING Central Lock Controller KAIYANG Car Charger Shinry Technologies Co.,Ltd Rear Fog Lamp/ Reversing lamp Danyang Jincheng Accessories Co.,Ltd Controller JIAYUAN License Plate Lamp Rear Group Lamp Danyang Jincheng Accessories Co.,Ltd Car Audio Changzhou HuaYin Electronic Co.,Ltd Electric Motor HEPU POWER TECHNOLOGY Co.,Ltd Reading Lamp Danyang Jincheng Accessories Co.,Ltd Group Switch Zhejiang Songsong Automobile Parts Co.,Ltd Cigarette Lighting Cixi Auto Parts Factory Outside Rear view Mirror JIUCHANG Electric Mirror Adjustment YUANLI Air Conditioning Nanjing Aotecar New Energy Technology Co.,Ltd Terminal Block Nanjing Duaner Electric Co.,Ltd

220 Annex MID Test report No. 61JUA0001B page 123 of EV Logo N/A Right Front group lamp N/A 8 Left Front group lamp N/A 7 Before the air intake grille mask ABS Rear fog lamp Reversing lamp Jiayuan Logo Left Rear group lamp Right Rear group lamp Logo(Rear) The back door handle Glazing deduction 45# Backe Door Hinge(Left) Backe Door Hinge(Right) Wheel hub Front bumper Right Daytime running lamp Left Daytime running lamp Vehicle-logo(Front) Windscreen wiper Outside handle(right) Outside handle(left) Outside Rear view Mirror (Right) N/A N/A ABS N/A N/A ABS ABS PA6 GF30 PA6 GF30 A356 PPT20-EPDM N/A N/A ABS ABS ABS ABS ABS 1 Outside Rear view Mirror (Left) ABS NO. Partname Material Directive(ECE) R(mm)

221 Annex MID Test report No. 61JUA0001B page 124 of EV Logo N/A Right Front group lamp N/A 8 Left Front group lamp N/A 7 Before the air intake grille mask ABS Reversing lamp Rear fog lamp Jiayuan Logo Rear group lamp Right Rear group lamp Logo(Rear) The back door handle Glazing deduction 45# Backe Door Hinge(Left) Backe Door Hinge(Right) Wheel hub Front bumper Right Daytime running lamp Left Daytime running lamp Vehicle-logo(Front) Windscreen wiper Outside handle(right) Outside handle(left) Outside Rear view Mirror (Right) N/A N/A ABS N/A N/A ABS ABS PA6 GF30 PA6 GF30 A356 PPT20-EPDM N/A N/A ABS ABS ABS ABS ABS 1 Outside Rear view Mirror (Left) ABS NO. Partname Material Directive(ECE) R(mm)

222 Annex MID Test report No. 61JUA0001B page 125 of 137

223 Annex MID Test report No. 61JUA0001B page 126 of 137 Type:JY7222-ZQR Appendix 5 Date : Dec Ext. : 01 Manufacturer s statement on endurance testing (Annex V to Commission Delegated Regulation (EU) No 3/2014) The undersigned: Mr. Kang Ma, Vice General Manager Company name and address of manufacturer: CHINA JIAYUAN POWER(HONG KONG)LIMITED Rooms /F, Manulife Provident Funds Place, 345 Nathan Road, KL, HONG KONG Name and address of the manufacturer s representative (if any): JOVE INTERNATIONAL GROUP LIMITED Akara Bldg., 24 De Castro Street, Wickhams Cay I, Road Town Tortola, British Virgin Islands Hereby states that the vehicles: Make (trade name of the manufacturer): JIAYUAN 0.1. Type: JY7222-ZQR Variant(s): Version(s):0, Commercial name(s) (if available): EIDOLA 0.2. Category, subcategory and sub-subcategory of vehicle: L7e-CP for which type-approval is sought shall withstand normal use as intended for at least km travelled within five years of first registration, taking into account regular and scheduled maintenance and specific equipment adjustments, as described clearly and unambiguously in the instructions manual delivered with the vehicles. The undersigned furthermore confirms that the endurance of the systems, parts and equipment critical for functional safety is ensured through appropriate testing and the use of good engineering practice. This declaration has no bearing on any vehicle warranty. Place: Hongkong Date: 3 rd DEC Signature: Name and position in the company: Kang Ma, Vice General Manage

224 Annex MID Test report No. 61JUA0001B page 127 of 137 Type:JY7222-ZQR Appendix 6 Date : Dec Ext. : 01 Manufacturer s statement on structure integrity (Annex XIX to Commission Delegated Regulation (EU) No 3/2014) The undersigned: Mr. Kang Ma, Vice General Manager Company name and address of manufacturer: CHINA JIAYUAN POWER(HONG KONG)LIMITED Rooms /F, Manulife Provident Funds Place, 345 Nathan Road, KL, HONG KONG Name and address of the manufacturer s representative (if any): JOVE INTERNATIONAL GROUP LIMITED Akara Bldg., 24 De Castro Street, Wickhams Cay I, Road Town Tortola, British Virgin Islands Hereby states that the vehicles: 0.1. Make (trade name of the manufacturer): JIAYUAN 0.2. Type: JY7222-ZQR Variant(s): Version(s):0, Commercial name(s) (if available): EIDOLA 0.3. Category, subcategory and sub-subcategory of vehicle: L7e-CP shall be constructed in a proper manner and are designed to be sufficiently robust to withstand the intended use over the vehicle s lifetime, taking into account regular and scheduled maintenance and specific equipment adjustments, as described clearly and unambiguously in the instructions manual delivered with the vehicles. The undersigned furthermore agrees to and guarantees that specific analyses of vehicle structures, components and/or parts using engineering calculations, virtual testing methods and/or structural testing shall be made available in a timely manner to the approval authority and the European Commission upon request in case of a recall due to a serious safety risk. This declaration applies to all vehicles covered by the type-approval to which this statement is annexed and has no bearing on any vehicle warranty. Place: Hongkong Date: 3 rd DEC Signature: Name and position in the company: Kang Ma, Vice General Manage

225 Annex MID Test report No. 61JUA0001B page 128 of 137 Type:JY7222-ZQR Appendix 7 Date : Dec Ext. : 01 Manufacturer s certificate on access to vehicle OBD (stage I) and vehicle repair and maintenance information The undersigned: Mr. Kang Ma, Vice General Manager Reference number: JY7222-ZQR -01 Company name and address of manufacturer: CHINA JIAYUAN POWER(HONG KONG)LIMITED Rooms /F, Manulife Provident Funds Place, 345 Nathan Road, KL, HONG KONG Name and address of the manufacturer s representative (if any): JOVE INTERNATIONAL GROUP LIMITED Akara Bldg., 24 De Castro Street, Wickhams Cay I, Road Town Tortola, British Virgin Islands Hereby states that the vehicles: it provides access to vehicle OBD and vehicle repair and maintenance information in compliance with - Chapter XV of Regulation (EU) No 168/2013 with respect to the types of vehicle, engine and pollution-control device listed in Addendum 1 to this certificate. The following derogation is applied: carry-over systems. The principal website addresses, through which the relevant information may be accessed and which are hereby certified to be in compliance with the above provisions, are listed in Addendum 2 to this certificate along with the contact details of the manufacturer s representative listed in Addendum 3 to this certificate, whose signature is below. Where applicable: The manufacturer hereby also certifies that it has complied with the obligation in Article 57(8) of Regulation (EU) No 168/2013 to provide the relevant information for previous approvals of these vehicle types no later than six months after the date of type-approval. Place: Hongkong Date: 3 rd DEC Signature: Name and position in the company: Kang Ma, Vice General Manager Addenda: 1: List of the types of vehicle, engine and pollution-control device 2: Web sites addresses 3: Contact details

226 Annex MID Test report No. 61JUA0001B page 129 of 137 Type:JY7222-ZQR Appendix 7 Date : Dec Ext. : 01 Addendum 1 to Manufacturer s certificate with reference number JY7222-ZQR-01 on access to vehicle OBD (stage I) and vehicle repair and maintenance information List of the types of vehicle: 0.2. Type: JY7222-ZQR Variant(s): Version(s):0, Commercial name(s) (if available): EIDOLA 0.3. Category, subcategory and sub-subcategory of vehicle: L7e-CP 1. Type-approval number including extension number (if available): N.A Type-approval issued on (date, if available): N.A. List of the types of engines: 3. Combustion engine/ electric motor/hybrid application code: N.A Type-approval number (if available): N.A Type-approval issued on (date, if available): N.A. List of the types of pollution-control devices: 0.7. Make(s) (trade name(s) of manufacturer): N.A Type: N.A Commercial name(s) (if available): N.A Type-approval number including extension number (if available): N.A Type-approval issued on (date, if available): N.A. Addendum 2 to Manufacturer s certificate with reference number JY7222-ZQR-01 on access to vehicle OBD (stage I) and vehicle repair and maintenance information Web site addresses referred to in this certificate:

227 Annex MID Test report No. 61JUA0001B page 130 of 137 Type:JY7222-ZQR Appendix 7 Date : Dec Ext. : 01 Addendum 3 to Manufacturer s certificate with reference number JY7222-ZQR-01 on access to vehicle OBD (stage I) and vehicle repair and maintenance information Contact details of the manufacturer s representative referred to in this certificate: JOVE INTERNATIONAL GROUP LIMITED Akara Bldg., 24 De Castro Street, Wickhams Cay I, Road Town Tortola, British Virgin Islands Name and position in the company: Hui Li, General Manager TEL: @qq.com

228 Annex MID Test report No. 61JUA0001B page 131 of 137 Type:JY7222-ZQR Appendix 8 Date : Dec Ext. : 01 Manufacturer s declaration on powertrain tampering prevention measures (anti-tampering) 1. Vehicle manufacturer s declaration on powertrain tampering prevention measures (anti-tampering): not to market interchangeable components which could enable propulsion unit performance to exceed levels applicable to the relevant (sub) category; manufacturer-facilitated modifications shall not increase the propulsion unit performance of the vehicle; modifications and interchangeability of parts and components Manufacturer s declaration not to market interchangeable components which could enable propulsion unit performance to exceed levels applicable to the relevant (sub) category 0.4. Company name and address of manufacturer: CHINA JIAYUAN POWER(HONG KONG)LIMITED Rooms /F, Manulife Provident Funds Place, 345 Nathan Road, KL, HONG KONG Name and address of the manufacturer s representative (if any): JOVE INTERNATIONAL GROUP LIMITED Akara Bldg., 24 De Castro Street, Wickhams Cay I, Road Town Tortola, British Virgin Islands Hereby declares that: For the L1e/L2e, (L3e/L4e)-A1/(L3e/L4e)-A2/L6e/L7e category vehicle: 0.1. Make (trade name of the manufacturer): JIAYUAN 0.2. Type: JY7222-ZQR Variant(s): Version(s):0, Commercial name(s) (if available): EIDOLA 0.3. Category, subcategory and sub-subcategory of vehicle: L7e-CP Will not market interchangeable components which could enable propulsion unit performance to exceed levels applicable to the relevant (sub) category; and that The manufacturer-facilitated modifications of the following characteristics: (a) spark delivery of the ignition system if applicable; (b) fuel feed and delivery system; (c) air-intake system including air filter(s) (modification or removal); (d) propulsion battery configuration or electric power to the electric motor(s) if applicable;

229 Annex MID Test report No. 61JUA0001B page 132 of 137 Type:JY7222-ZQR Appendix 8 Date : Dec Ext. : 01 (e) drive-train; (f) and the control unit(s) that control(s) the propulsion unit performance of the powertrain. shall comply with the requirements set out in point 2.6. of Annex II to Commission Delegated Regulation (EU) No 44/2014 For L3e-A2/L4e-A2/L7e category vehicles the manufacturer declares that: The modifications and interchangeability of: (a) spark delivery of the ignition system, if applicable; (b) fuel feed and delivery system; (c) air-intake system including air filter(s) (modification or removal); (d) the drive-train; (e) the control unit(s) for the propulsion unit performance of the powertrain; (f) removal of any component (mechanical, electrical, structural, etc.) which limits full engine load, leading to any change in the propulsion unit performance as approved in accordance with Annex II (A) to Regulation (EU) No 168/2013 shall comply with the requirements set out in point 2.6 of Annex II to Commission Delegated Regulation (EU) No 44/2014 Place: Hongkong Date: 3 rd DEC Signature: Name and position in the company: Kang Ma, Vice General Manager

230 Annex MID Test report No. 61JUA0001B page 133 of 137 e13*168/2013*00060*01 Société Nationale de Certification et d'homologation L-5201 SANDWEILER (Luxembourg) Organisme accrédité OLAS ISO/IEC Accréditation N 5/001 (Portée communiquée sur demande)

231 Annex MID Test report No. 61JUA0001B page 134 of 137 COMPLETE VEHICLE EU CERTIFICATE OF CONFORMITY The undersigned, Yuan Ma, Vice General Manager Hereby certifies that the following vehicle: 0.1. Make (trade name of the manufacturer): JIAYUAN 0.2. Type: JY7222-ZQR Variant: Version: Commercial name (if available): EIDOLA 0.3. Category, subcategory and sub-subcategory of vehicle: L7e-CP 0.4. Company name and address of manufacturer: CHINA JIAYUAN POWER(HONG KONG)LIMITED Rooms /F, Manulife Provident Funds Place, 345 Nathan Road, KL, HONG KONG Name and address of manufacturer s authorized representative (if any): JOVE INTERNATIONAL GROUP LIMITED Akara Bldg., 24 De Castro Street, Wickhams Cay I, Road Town Tortola, British Virgin Islands Location of the manufacturer's statutory plate(s): R, x1000, y535, z Method of attachment of the manufacturer's statutory plate(s): Riveted 0.6. Location of the vehicle identification number: R, x1266, y496, z Vehicle identification number: *R1J??????????????* conforms in all respects to the type described in EU type-approval (e13*168/2013*00060*01 type-approval number including extension number) issued on (DD, MM, YYYY date of issue) and can be permanently registered in Member States having right/left-hand traffic and using metric/imperial units for the speedometer. DD, MM, YYYY (place) (date) (signature) General construction characteristics 1.3. Number of axles: 2 and wheels: Axles with twinned wheels: N.A Powered axles: R Advanced braking system: ABS / CBS / Both ABS and CBS / None: Main dimensions Length: 2245 mm Width: 1290 mm Height: 1570 mm Wheelbase: 1500 mm Wheelbase sidecar: N.A Track width Track width front: 1094 mm Track width rear: 1094 mm Track width sidecar: N.A Ground clearance between the axles: N.A Wheelbase to ground clearance ratio: N.A Seat height: N.A. Masses Mass in running order: 448 kg Actual mass: 772 kg Technically permissible maximum laden mass: 897 kg Technically permissible maximum mass on front axle: 342 kg Technically permissible maximum mass on rear axle: 555 kg Technically permissible maximum mass on sidecar axle: N.A Technically permissible maximum towable mass: Braked: N.A. Unbraked: N.A Technically permissible maximum laden mass of the combination: N.A Technically permissible maximum mass at the coupling point: N.A. Powertrain Manufacturer: N.A Engine code (as marked on the engine or other means of identification): N.A Working principle of the combustion engine: internal combustion engine (ICE)/positive ignition/ compression ignition/external combustion engine (ECE)/turbine/compressed air N.A Number of cylinders: N.A Arrangement of cylinders: LI / V / O / S N.A Engine capacity: N.A Maximum net power: N.A Ratio maximum net power/mass of the vehicle in running order: N.A Fuel type: N.A Vehicle fuel combination: mono-fuel/bi-fuel/flex-fuel N.A Maximum amount of bio-fuel acceptable in fuel: N.A Manufacturer: NANJING JIAYUAN SPECIAL ELECTRIC VEHICLES MANUFACTURE CO.,LTD Electronic motor code (as marked on the engine or other means of identification): JYD /30 minutes power: 7.5 kw at 3050 min Manufacturer: N.A.

232 Annex MID Test report No. 61JUA0001B page 135 of Application code (as marked on the engine or other means of identification): N.A Electric vehicle configuration: pure electric/hybrid electric/manpower -electric Category of hybrid electric vehicle: off-vehicle charging/not off-vehicle charging N.A Maximum assistance factor: N.A. Maximum speed 1.8. Maximum speed of vehicle: 78 km/h Maximum vehicle speed for which the electric motor gives assistance: N.A. Drive-train and control Transmission (type): A Gear ratios: Forward gear Final drive ratio: N.A Overall gear ratio in highest gear: N.A. Installation of tyres Tyre size designation: (optional 1) Axle 1: 145/70R12 69T 12x5 250 kpa Axle 2: 145/70R12 69T 12x5 250 kpa (optional 2) Axle 1: 145/70R12 69Q 12x kpa Axle 2: 145/70R12 69Q 12x kpa (optional 3) Axle 1: 145/70R12 69N 12x kpa Axle 2: 145/70R12 69N 12x kpa Exhaust emissions measured according to Regulation (EU) No 134/2014 including all amendments up to (EU) 2016/ Type I test: tailpipe emissions after cold start, including the deterioration factor, if applicable: CO : N.A. THC : N.A. NMHC : N.A. NOx : N.A. THC+NOx : N.A. PM : N.A Type II test: tailpipe emissions at (increased) idle and free acceleration: HC: N.A. CO: N.A Smoke corrected absorption coefficient: N.A. Energy efficiency Fuel consumption: N.A CO2 emissions: N.A Energy consumption: 106 Wh/km Electric range: 103 km Conversion of the performance of the vehicle: 8.1. Vehicle appropriate for converting its performance level between subcategories (L3e/L4e)-A2 and (L3e/L4e)-A3 and vice versa: yes/no N.A. Additional information: 9.1. Remarks: N.A Exemptions: N.A. Sidecar wheel: N.A. Bodywork Door configuration and number of doors: 1R, 1L Number of seating positions: Location and arrangement: r1: 1R, 1L Coupling devices Type-approval number of coupling-device: N.A. Environmental performance Environmental step: Euro (3/ 4 /5) N.A Sound level measured according to: N.A Stationary: N.A. at engine speed: N.A Drive-by: N.A Limit value for Lurban: N.A.

233 Annex MID Test report No. 61JUA0001B page 136 of 137 COMPLETE VEHICLE EU CERTIFICATE OF CONFORMITY The undersigned, Yuan Ma, Vice General Manager Hereby certifies that the following vehicle: 0.1. Make (trade name of the manufacturer): JIAYUAN 0.2. Type: JY7222-ZQR Variant: Version: Commercial name (if available): EIDOLA 0.3. Category, subcategory and sub-subcategory of vehicle: L7e-CP 0.4. Company name and address of manufacturer: CHINA JIAYUAN POWER(HONG KONG)LIMITED Rooms /F, Manulife Provident Funds Place, 345 Nathan Road, KL, HONG KONG Name and address of manufacturer s authorized representative (if any): JOVE INTERNATIONAL GROUP LIMITED Akara Bldg., 24 De Castro Street, Wickhams Cay I, Road Town Tortola, British Virgin Islands Location of the manufacturer's statutory plate(s): R, x1000, y535, z Method of attachment of the manufacturer's statutory plate(s): Riveted 0.6. Location of the vehicle identification number: R, x1266, y496, z Vehicle identification number: *R1J??????????????* conforms in all respects to the type described in EU type-approval (e13*168/2013*00060*01 type-approval number including extension number) issued on (DD, MM, YYYY date of issue) and can be permanently registered in Member States having right/left-hand traffic and using metric/imperial units for the speedometer. DD, MM, YYYY (place) (date) (signature) General construction characteristics 1.3. Number of axles: 2 and wheels: Axles with twinned wheels: N.A Powered axles: R Advanced braking system: ABS / CBS / Both ABS and CBS / None: Main dimensions Length: 2245 mm Width: 1290 mm Height: 1570 mm Wheelbase: 1500 mm Wheelbase sidecar: N.A Track width Track width front: 1094 mm Track width rear: 1094 mm Track width sidecar: N.A Ground clearance between the axles: N.A Wheelbase to ground clearance ratio: N.A Seat height: N.A. Masses Mass in running order: 448 kg Actual mass: 772 kg Technically permissible maximum laden mass: 897 kg Technically permissible maximum mass on front axle: 342 kg Technically permissible maximum mass on rear axle: 555 kg Technically permissible maximum mass on sidecar axle: N.A Technically permissible maximum towable mass: Braked: N.A. Unbraked: N.A Technically permissible maximum laden mass of the combination: N.A Technically permissible maximum mass at the coupling point: N.A. Powertrain Manufacturer: N.A Engine code (as marked on the engine or other means of identification): N.A Working principle of the combustion engine: internal combustion engine (ICE)/positive ignition/ compression ignition/external combustion engine (ECE)/turbine/compressed air N.A Number of cylinders: N.A Arrangement of cylinders: LI / V / O / S N.A Engine capacity: N.A Maximum net power: N.A Ratio maximum net power/mass of the vehicle in running order: N.A Fuel type: N.A Vehicle fuel combination: mono-fuel/bi-fuel/flex-fuel N.A Maximum amount of bio-fuel acceptable in fuel: N.A Manufacturer: NANJING JIAYUAN SPECIAL ELECTRIC VEHICLES MANUFACTURE CO.,LTD Electronic motor code (as marked on the engine or other means of identification): JYD /30 minutes power: 7.5 kw at 3050 min Manufacturer: N.A.

234 Annex MID Test report No. 61JUA0001B page 137 of Application code (as marked on the engine or other means of identification): N.A Electric vehicle configuration: pure electric/hybrid electric/manpower -electric Category of hybrid electric vehicle: off-vehicle charging/not off-vehicle charging N.A Maximum assistance factor: N.A. Maximum speed 1.8. Maximum speed of vehicle: 78 km/h Maximum vehicle speed for which the electric motor gives assistance: N.A. Drive-train and control Transmission (type): A Gear ratios: Forward gear Final drive ratio: N.A Overall gear ratio in highest gear: N.A. Installation of tyres Tyre size designation: (optional 1) Axle 1: 145/70R12 69T 12x5 250 kpa Axle 2: 145/70R12 69T 12x5 250 kpa (optional 2) Axle 1: 145/70R12 69Q 12x kpa Axle 2: 145/70R12 69Q 12x kpa (optional 3) Axle 1: 145/70R12 69N 12x kpa Axle 2: 145/70R12 69N 12x kpa Sidecar wheel: N.A Exhaust emissions measured according to Regulation (EU) No 134/2014 including all amendments up to (EU) 2016/ Type I test: tailpipe emissions after cold start, including the deterioration factor, if applicable: CO : N.A. THC : N.A. NMHC : N.A. NOx : N.A. THC+NOx : N.A. PM : N.A Type II test: tailpipe emissions at (increased) idle and free acceleration: HC: N.A. CO: N.A Smoke corrected absorption coefficient: N.A. Energy efficiency Fuel consumption: N.A CO2 emissions: N.A Energy consumption: 106 Wh/km Electric range: 103 km Conversion of the performance of the vehicle: 8.1. Vehicle appropriate for converting its performance level between subcategories (L3e/L4e)-A2 and (L3e/L4e)-A3 and vice versa: yes/no N.A. Additional information: 9.1. Remarks: N.A Exemptions: N.A. Bodywork Door configuration and number of doors: 1R, 1L Number of seating positions: Location and arrangement: r1: 1R, 1L Coupling devices Type-approval number of coupling-device: N.A. Environmental performance Environmental step: Euro (3/ 4 /5) N.A Sound level measured according to: N.A Stationary: N.A. at engine speed: N.A Drive-by: N.A Limit value for Lurban: N.A.