Smith and Hawken Gazebo. Style# LGZ425PST Tc# >>assembly instructions

Transcription

1 Smith and Hawken Gazebo Style# LGZ425PST Tc# >>assembly instructions 1

2 Congratulations on your latest Target.com purchase Now what? Don t start sweating over this box of parts. This will be easy. We did the hard work for you. All you need to do is follow our simple instructions and you ll be on your way transforming your room in on time. Good luck-though we re confident you won t need it. Before you begin 1. Use the carton as a working surface to prevent product damage during assembly 2. Gather all tools prior to assembly Warning: This unit is heavy. Do not assemble this item alone. Read and follow all Warnings & Assembly Instructions before attempting to assemble. KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC. This tent meets the flammability requirements of CPAI-84. The fabric may burn if left in continuous contact with any flame source. The application of any foreign substance to the tent fabric may render the flame-resistant properties ineffective. Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of the gazebo construction. Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house, overhanging branches, laundry line, or electrical wires. Some parts may container sharp edges. When assembling and using this product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to the product. Assemble on level ground. Check all bolts for tightness before use, and periodically check and tighten bolts as necessary. >>assembly instructions 2

3 Tools Needed >>assembly instructions 3

4 Table of contents... Introduction 2-3 Hardware 5-6 Parts list 7 Assembly

5 Hardware Pack 1 (AA) x 32 (BB) x 72 (CC) x 24 (DD) x 16 1/4-20*0.6 Φ1/4" Flat washer 1/4-20*0.6 1/4-20*1 Bolt Bolt Bolt Hardware Pack 2 (BB) x 16 Φ1/4" Flat washer (EE) x 8 1/4-20 Nut (FF) x 8 1/4-20*1.4 Bolt 5

6 Hardware Pack 3 (W) x 1 1/4 wrench (HH) x16 Φ5/16 *7 Ground Stake 6

7 ITEM DESCRPTION QUANTITY... A1 Short Screen (1) 2 A2 Short Screen (2) 2 B1 Long Screen (1) 2 B2 Long Screen (2) 2 C Top Tilt Girder 4 D1 Middle Girder (Long side) 2 D2 Middle Girder (Short side) 2 E Small Peak Girder 4 F1 Connection of Top Tilt Girder 2 F2 Connection of Top Tilt Girder 2 G Connection of Middle Girder 4 H Connection of Top Screen 1 I Connection of Small Screen 1 J Post 4 K Base 4 L Base cover 4 M1 Mosquito Net Tube(Long) 4 M2 Mosquito Net Tube(Short) 4 N1 Hook 1 N2 Finial 1 O Small Canopy 1 P Big Canopy 1 Q SunShade 1 GG R Mosquito Netting 1 GG Plastic hook 52 in R 10 in Q 7

8 Step 1. Fig.1: Attach Base Cover L to Posts J, attach Base K into Posts J, tighten with Bolts AA and Flat Washer BB. Fig 2: Insert Short Screen (2) A2 into Short Screen (1) A1, tighten with Bolts CC, Flat Washer BB. Attach Connection of Middle Girder G into the middle of screens, tighten with Bolt CC and Flat Washer BB. Repeat same process on Long Screens B1 & B2. Fig 3: Attach Long Mosquito Net Tube M1 onto Long Screens B1&B2, attach Short Mosquito Net Tube M2 onto Short Screens A1 & A2, tighten with Bolts AA and Flat washer BB. Fig.4: Attach the assembled screens onto Posts J by using Bolts DD and Flat Washer BB. Fig 5: Attach the Connection of Top Tilt Girder F1 & F2 onto the top of Posts J by using Flat washer BB and Bolt CC. F1 F2 8

9 Step 2. Fig 6: Attach the Hook N1 onto Connection of Top Screen H. Fig 6-1: Insert the end with holes of Top Tilt Girders C into Connection of Top Screen H. Fig 6-2: Insert the other end of Top Tilt Girders C into Connection of Top Tilt Girders F1 & F2. Fig 7: Insert the Long Middle Girder D1 and Short Middle Girder D2 into Connection of Top Screen H Fig 7-1: Attach Middle Girder (Long side) D1(short side D2) to Connection of Middle Girder G. tighten by using Flat Washer BB, Nut EE and Bolt FF. Fig. 9 9

10 Step 3. Fig 8: Insert Small Peak Girder E into Connection of Small Screen I. Fig 8-1: Place the Small Canopy O onto the small top and attach Finial N2 onto the small top Fig 9: Place the Big Canopy P onto big top, DO NOT extend completely. Attach the assembled small top onto the Top Tilt Girder C, tighten with Bolts FF, Flat Washer BB and Nut EE, and then extend the Big Canopy P. 10

11 Step 4. Fig 10: Slide Plastic Hooks GG into Mosquito Net Tubes M1 & M2. hang the Mosquito Netting R onto hooks GG by then. Fig 11: Secure the completely assembled Gazebo into the ground by using the Ground Stakes HH. Fig 12: Attach Plastic Hooks GG to Sunshade Q, Put the Sunshade Q aside, hang it on the Mosquito Net Tube B1 & B2 if necessary. Fig

12 USE & CARE 1. This Gazebo is not a permanent structure and should be disassembled & stored away after use. 2. Do not repack your gazebo until completely dry. 3. This Gazebo must be assembled by two adults or more. 4. This Gazebo must not be left erect in windy conditions. WARNINGS 1. Assembly Instructions must be followed. 2. Pegs supplied must be used to hold this gazebo in place when upright. 3. Warranty does not cover damage due to extreme weather conditions. CUSTOMER SERVICE Sunjoy Industries warrants to the original purchaser that this item is free from defects in workmanship and materials of your item provided the item was factory-sealed at the time of purchase and is maintained with care and used only for personal, residential purposes. The item is warranted to be free from defects in material or workmanship for a period of 6 months. Should any manufacturing defect arise within this warranty period, Sunjoy Industries will repair or replace (at our option) any defective merchandise upon proof of purchase; however, transportation and delivery costs, as well as labor and material charges to remove or replace parts, remain the responsibility of the purchaser. A purchaser of an "open box," previously-returned, or "clearance" item, as well as original purchasers outside of the warranty period, may obtain replacement parts from Sunjoy Industries for products in current production, at nominal cost. If you are within the return policy that most stores have, you do have the option of returning this item back to the store which you bought it from for an exchange of the same item, or a refund of the purchase. 12