www MK-Electronic de Parts List Chapter In this chapter...

Transcription

1 In this chapter... Serial Number Format Using the Parts List Print Engine Parts Options Xerox Supplies and Accessories Service Kits Chapter

2 Serial Number Format Example Changes to Xerox products are made to accommodate improved components as they become available. It is important when ordering parts to include the following information: Component's part number Product type or model number Serial Number of the printer The serial number is found on a label located on the frame of the printer. Front Cover must be opened to locate the Serial Number. The nine-digit serial number has the following format: PPPRSSSSS PPP = Three digit alphanumeric product code R = Single digit numeric revision digit, 0~. To be rolled when a major product change occurs and initiated with a change request. Product Code GNX GPX Product 10MFP, 110 V Engine 10MFP V, 220 V Engine Mass Production Units (MP Build) PPP1SSSSS SSSSS = Five digit numeric serial number based on the following table: Product Starting Serial Number Ending Serial Number 10MFP_N, 110V Engine MFP_D, 110V Engine MFPV_N, 220V Engine MFP V_D, 220V Engine 0001 GNX130001: Xerox Serial Number GNX: Product Code for the Phaser 10MFP, configuration N or D, 110V printer 1 = Revision Level = Serial Number for 10MFP_N MANUFACTURED September 200 XEROX S/N GNX s10mfp-0-2 Phaser 10MFP Multifunction Printer Service Manual

3 Using the Parts List ID No.: The callout number from the exploded part diagram. Name/Description: The name of the part to be ordered and the number of parts supplied per order. Part Number: The material part number used to order that specific part. Parts identified throughout this manual are referenced PL#.#.#; For example, PL means the part is item 10 of Parts List 3.1. A black triangle preceding a number followed by a parenthetical statement in an illustrated parts list means the item is a parent assembly, made up of the individual parts called out in parentheses. The notation with X~Y following a part name indicates an assembly that is made up of components X through Y. For example, 1 (with 2~) means part 1 consists of part 2, part 3, and part. An asterisk (*) following a part name indicates the page contains a note about this part. The notation (NS) next to a part indicates that particular part is not spared, but contained in a kit or major assembly. The notation J1<>J2 and P2 is attached to a wire harness. It indicates that connector Jack 1 is attached to one end of the wire harness and connector J2 is attached to the other end that is plugged into P2. Note Only parts showing part numbers are available for ordering by support. Parts not showing part numbers are available on the parent assembly. Abbreviations Abbreviation C E KL S Meaning C-ring E-ring K-clip Screw Phaser 10MFP Multifunction Printer Service Manual -3

4 Print Engine Parts Parts List 1.1 Covers (1 of 2) Front s10mfp-21 - Phaser 10MFP Multifunction Printer Service Manual

5 Parts List 1.1 Covers (1 of 2) ID No. Name/Description Part Number 1. Cover Assy Top (with 2) K00 2. Cover Top Stopper 3. Cover Pole In Left. Cover Pole In Right. Cover Bottom. Cover Rear E020. Cover CST E00. Cover Pole Right E000. Cover Right Assy E Cover Left Assy E Cover Pole Left E Cap Screw Phaser 10MFP Multifunction Printer Service Manual -

6 Parts List 1.2 Covers (2 of 2) (with 2-32) (with 3-12,1-23,2,3,3) (J202) (J301) (P221) 10 (J3) (P301) 1 1 (P220) 3 3 Front 3 (J22) s10mfp-21 - Phaser 10MFP Multifunction Printer Service Manual

7 Parts List 1.2 Covers (2 of 2) ID No. Name/Description Part Number 1. Cover Assy Front (with 3-12, 1-23, 2, 3, 3) K Control Panel (without overlays) K Cover Front Assy. Latch Front. Plate Latch. Spring Latch. Cover Harness. Button Top. Contact Front 10. Shaft Pivot (Pin Kit) K Cover Harness 12. Holder Drawer 13. Harness Assy Front Cover (J22-P220, P221, T322-T3221) (Harness Kit) 0K0 1. Harness Assy Drawer Earth (T321-T3210) 1. Harness Assy Front Cover Earth 1 (T321-T3210) Pin Pivot PMT (Pin Kit) K32 1. Shaft Lever 1. Plate Pivot 20. Lever MPT Spring Lever MPT 22. Spring Lever Link 23. Lever MPT 2 2. Harness Assy A-OP-OPP (J202-J301) (Harness Kit) 0K0 2. Harness Assy A-OP-ESS (J3-P301) (Harness Kit) 0K0 2. Cover Assy MPT (with 2-32) K Link Assy MPT Left 2. Tray Assy MPT Base 2. Link Assy MPT Right 30. Tray MPT 31. Spring Tray 32. Cover MPT 33. Shaft Pivot MPT (Pin Kit) K32 3. Spring Cover OPP Left 3. Plate Earth FC 3. Dup Connector Cap Kit Cap Connector Drawer Phaser 10MFP Multifunction Printer Service Manual -

8 Parts List 1.2 Covers (2 of 2) (continued) ID No. Name/Description Part Number 3. Label, Overlay, French (World Kit) 0K2130 Label, Overlay, Spanish (World Kit) 0K2130 Label, Overlay, Brazilian/Portuguese (World Kit) 0K Phaser 10MFP Multifunction Printer Service Manual

9 Parts List 2.1 Tray 2 (1 of 2) Front 1 (with 2-2, PL2.2.1) [Ref PL2.2.1] 2 (with 3,12~2) (with ~11) 2 (with 2~2) s10mfp-231 Phaser 10MFP Multifunction Printer Service Manual -

10 Parts List 2.1 Tray 2 (1 of 2) No. 1. Name/Description Cassette Assy 20 (with 2-2, PL2.2.1) (Tray 2) Part Number 00K1 2. Cassette Assy Front (with 3, 12, 2) (Tray 2 Front Assy) Kit Holder Assy Retard MPT (with -11) Chute Separator Spring Chute Bearing Separator Left Roll Assy Separator N Bearing Separator Right Spring Separator 200 Holder Separator MPT Plate Assy Separator Roll Pinch Turn Spring Pinch Turn Follower Left Follower Right Arm Left Spring NF MPT Arm Right Housing Base FR 20 Plate Assy Bottom Holder MPT Left Cover Front MPT Handle CST (Tray Handle) Actuator Assy MPT (with 2-2) Holder Actuator Actuator No Paper MPT Roll Actuator No Paper Spring No Paper 01K K Phaser 10MFP Multifunction Printer Service Manual

11 Parts List 2.2 Tray 2 (2 of 2) 1 (with 2~33) (with 13~1) Front 2 22 s10mfp-232 Phaser 10MFP Multifunction Printer Service Manual -11

12 Parts List 2.2 Tray 2 (2 of 2) No Name/Description Cassette Assy Rear 20 (with 2-33) Plate Assy BTM A Stopper PB Gear BTM Lock Oneway Shaft PB A Gear BTM DMP Oneway Gear PB Left Spring BTM Up 20 A Guide Assy Side Right 20 A Guide Assy Side Left 20 A Gear Pinion Holder Assy Separator (with 13-1) Cover Retard CST (Tray Retard Cover) Holder Separator Shaft Separator Clutch Friction Retard Kit, Roll Assy Feed & Retard (Periodic Replacement Part - per 100K prints) (consists of 3 pcs and tech sheet) Spring Separator Switch Size Set Plate Gear Lock 20 Guide Assy Tray End 20 Actuator Size Housing Base RE 20 Actuator Release PB Spring Stopper Gear Gear PB Right Cover BTM Up 20 Rack BTM Lock 20 Spring BTM Lock Gear BTM Lock Pinion Gear Lever BTM Lock Lever BTM Lock Part Number 01K010 K Phaser 10MFP Multifunction Printer Service Manual

13 Parts List 3.1 Paper Feeder (1 of 2) Front 1 P21 11 MPT No Paper Sensor 1 J2 10 [Ref PL3.2.1] 1 (with,~12,1) J21 20 J233 1 J23 2 J23 3 s10mfp-233 Phaser 10MFP Multifunction Printer Service Manual -13

14 Parts List 3.1 Paper Feeder (1 of 2) ID No Name/Description Clamp Duct MPT Solenoid Kit Solenoid Feed MPT (with, ) Part Number K Spring Feed MPT Gear MPT Bearing Earth CAM MPT Right Roll Assy MPT (with, -12, 1) Roll Core MPT Kit Roll Assy Feed MPT (with tech sheet) Pin Dowel Shaft MPT Bearing Chute MPT Sensor Photo (Tray 1 No Paper Sensor) Cover Sensor Harness Assy MPT NPP (J2-J21) - (Harness Kit) CAM MPT Left Clutch Assy PH Regi Clutch Assy PH Feeder 0K31 K30 30W E22 0K0 121K K310-1 Phaser 10MFP Multifunction Printer Service Manual

15 Parts List 3.2 Paper Feeder (2 of 2) (with 1, PL3.2.1, 1, 20) 2 (with 3~21,0) (with 30, 3~3) 2 Front 11 0 Tray 2 No Paper Sensor P Regi Sensor J2321 P2322 J (with 2, 30) P212 3 J211 J212 2 J232 P21 P211 2 (with ~0) J2 2 J23 J21 s10mfp-3 Phaser 10MFP Multifunction Printer Service Manual -1

16 Parts List 3.2 Paper Feeder (2 of 2) ID No. Name/Description Part Number 1. Kit Feeder Assy (with 1, PL3.2.1, 1-20) K 2. Chute Assy Regi (with 3-21, 0) 3. Bracket NIP. Spring Regi Left. Spring Regi Right. Roll Regi Metal. Roll Regi Rubber. Film Inlet Left. Gear Regi Metal 10. Gear Regi Rubber 11. Bearing Regi 12. Chute Regi 13. Actuator A 1. Spring Regi Sensor A 1. Actuator B 1. Spring Regi Sensor B 1. Cover Actuator 1. Chute Separator BTM 1. Clamp Mini-Saddle 20. Clamp 21. Bearing Regi E Clutch Assy PH Turn 2. Bearing Nudger 2. Spring Earth 2. Chute Assy Regi Upper (with 2, 30) 2. Chute Regi Upper 30. Sensor Photo (Regi Sensor, Tray No Paper Sensor) Roll Assy Turn 33. Chute Assy Top (with 30, 3, 3) 3. Holder No Sensor 3. Chute Assy Separator 3. Clamp 3. Harness Assy Regi Sensor (J232-J2321, J2322) - (Harness Kit) 0K Phaser 10MFP Multifunction Printer Service Manual

17 Parts List 3.2 Paper Feeder (2 of 2) (continued) ID No. Name/Description Part Number Shaft Feed Support Nudger Assy. Shaft Nudger. Roll Assy Gear Nudger. Gear Idler Nudger. Holder No Paper Left A. Actuator No Paper A 0. Holder No Paper Right A 1. Clutch Oneway Nudger 2. Clutch Oneway Feed 3. Roll Assy Feed (Periodic Replacement Part - per 100K prints) (consist of 3 pcs and tech sheet). PWBA OHP LED (Not used on 10MFP). Cover OHP Sensor. PWBA OHP Sensor (Not used on 10MFP). Harness Assy OHP Sensor (J21-J211, J212). Harness Assy OHP (J2-P21) K0. Nudger Assy (with -0) 0K22 0. Guide Film Phaser 10MFP Multifunction Printer Service Manual -1

18 Parts List.1 Transfer Unit Parts List.1 Transfer ID No. Name/Description Part Number 1. [Ref PL1.2.3] Front J221 Kit Belt CRU (Transfer Unit) (Periodic Replacement Part - per 100K prints) 1 s10mfp-23 K0-1 Phaser 10MFP Multifunction Printer Service Manual

19 Parts List.1 Xerographics (1 of 2) Front 11 (J12) s10mfp-220 Phaser 10MFP Multifunction Printer Service Manual -1

20 Parts List.1 Xerographics (1 of 2) ID No. Name/Description Part Number 1. Clamp RLMS-2V0 2. Frame Assy Earth Clamp RLWT-2V0. Clamp RLWC-3SV0. Clamp Saddle LES-101. Foot. Clamp Saddle LES Clamp Saddle LED Bush STB Spring ROS 12. ROS Assy GNB 13. CORE (Ferrite Core) 1. Spacer Assy FFC 1. Film Assy Harness Guard 1. Clamp Cartridge Assy (Print Cartridge) (K) (Periodic Replacement Part - per K prints) Cartridge Assy (Print Cartridge) (K) (Periodic Replacement Part - per 3K prints) Cartridge Assy (Print Cartridge) (K) (Periodic Replacement Part - Metered Print) Cartridge Assy (Print Cartridge) (C) (Periodic Replacement Part - per K prints) Cartridge Assy (Print Cartridge) (C) (Periodic Replacement Part - per 2K prints) Cartridge Assy (Print Cartridge) (C) (Periodic Replacement Part - Metered Print) Cartridge Assy (Print Cartridge) (M) (Periodic Replacement Part - per K prints) Cartridge Assy (Print Cartridge) (M) (Periodic Replacement Part - per 2K prints) Cartridge Assy (Print Cartridge) (M) (Periodic Replacement Part - Metered Print) Cartridge Assy (Print Cartridge) (Y) (Periodic Replacement Part - per K prints) Cartridge Assy (Print Cartridge) (Y) (Periodic Replacement Part - per 2K prints) Cartridge Assy (Print Cartridge) (Y) (Periodic Replacement Part - Metered Print) 0K20 113R R R R R R R R R R R R Phaser 10MFP Multifunction Printer Service Manual

21 Parts List.2 Xerographics (2 of 2) 1 (P11) 1 13 (P11) Front (J13) (J1) (J12) (J11) (J1) (with 3-) 3 Toner Cartridge Sensor (P13) (K) (P1) (C) (P12) (M) (P11) (Y) CRUM Sensor (P31) 1 1 (P313) (P312) (P311) s10mfp-0 Phaser 10MFP Multifunction Printer Service Manual -21

22 Parts List.2 Xerographics (2 of 2) ID No. Name/Description Part Number 1. Connector CRUM 2. Sensor Assy CRU (with 3-) 130K1 3. Actuator Sensor CRU. Spring CRU. Bracket Sensor CRU. Sensor Photo (Print Cartridge Sensor). Stopper Spring. Spring CRU Right. Spring CRU Left 10. Dispenser Assy 0K Bias Assy 12. Spring ESA Roll 13. LED Assy 122K Duct Harness Motor 1. HVPS 10K Spacer ROS Shaft -22 Phaser 10MFP Multifunction Printer Service Manual

23 Parts List.1 Fuser & Exit Front [Ref PL1.2.] 1 (with 2~,1,1) 2 3 J J P V: Black and White 230V: Blue and Brown J1 12 s10mfp-23 Phaser 10MFP Multifunction Printer Service Manual -23

24 Parts List.1 Fuser & Exit ID No. 1. Name/Description Chute Assy Exit Out (with 2-, 1, 1) (attached on PL1.2.3) Part Number 0K Spring Pinch Exit Out Roll Pinch Exit Spring CORR Roll Corrugate Holder CORR 2 Eliminator Exit Spring Chute Out Chute Exit Out 20 Fuser Assy KMY 11V (Periodic Replacement Part - per 100K prints) Fuser Assy KMY 230V (Periodic Replacement Part - per 100K prints) Harness Assy Fuser AIO 100V (P11-J1, J) - (Harness Kit, Black & White) Harness Assy Fuser AIO 200V (P11-J1, J) - (Harness Kit, Blue & Brown) Bracket Fuser Chute Dup Gate Plate Latch FSR AD Plate Latch FSR D Tape Eliminator Plate Earth Exit K0 K10 0K0 0K0 K30-2 Phaser 10MFP Multifunction Printer Service Manual

25 Parts List.1 Frame (with 2~) (with 20, 22) (with, ~, 12, 13) 12 JP231 Front 13 s10mfp-23 Phaser 10MFP Multifunction Printer Service Manual -2

26 Parts List.1 Frame ID No. 1. Name/Description Wheel Star Assy Part Number 01K Link Assy Left (Kits) Link Latch Trans (Kits) Lever Release (Kits) Holder Damper H (Kits) Damper Oil H (Kits) Spring Support Link Assy Right (Kits) Link Right Kit Foot Assy ( pcs) Clamp WS-2W-V Guide Tray Right 20 Switch Assy Size Guide Tray Assy Left 20 (with 20, 22) Guide Tray Left Spring Tray Lock Duct Side Left Stopper Frame Left Kit Link Assy Left (with 2-) Kit Link Assy Right (with, -, 12, 13) K30 110K1220 K33 K01-2 Phaser 10MFP Multifunction Printer Service Manual

27 Parts List.1 Drive Front 1 P21 2 P222 P221 J21 P211 s10mfp-23 Phaser 10MFP Multifunction Printer Service Manual -2

28 Parts List.1 Drive ID No Name/Description Bracket Gear T1 Drive Assy Main Part Number K Drive Assy PH Duct Drive PH Duct Drive Main K30-2 Phaser 10MFP Multifunction Printer Service Manual

29 Parts List.1 Electrical (1 of 2) 12 Front (with 11,12,1,1-1,2,2) (with 2,2) (with 21) 3 (with,,2) (with -12) s10mfp-221 Phaser 10MFP Multifunction Printer Service Manual -2

30 Parts List.1 Electrical (1 of 2) ID No. 1. Name/Description Scanner Controller Board (with 2, 2) Part Number 0K Support Fax PWBA Fax Box Assy Fax AIO (with,, 2) Plate Assy Fax AIO Clamp RLWT-2V0 Shield Assy ESS Window (with -12) Hinge Assy Window Plate Assy ESS Sub Plate Window ESS Washer Screw Knurling Box Assy PRT AIO (with 11, 12, 1, 1-1, 2, 2) Plate Asst PRT AIO Plate Optional Box ESS PRT Clamp Saddle LES-101 PWBA ESS (with 21) NVM ROM 0K3110 0K MB DDR2 Memory Card (1x 12 MB) (Option) 0K00 2 MB DDR2 Memory Card (1x 2 MB) (Option) 0K10 Multi-Protocol Card (Option) NVM ROM Film Assy Insulation FFC Gasket SSTG -1 Gasket SSTG 1- K Phaser 10MFP Multifunction Printer Service Manual

31 Parts List.2 Electrical (2 of 2) (P1) (J1) (J) (J) (J2) (P21) (J03) s10mfp-222 Phaser 10MFP Multifunction Printer Service Manual -31

32 Parts List.2 Electrical (2 of 2) ID No. Name/Description Part Number 1. PWBA EEPROM (XPRO) 0K Varistor Harness Assy Interlock AIO (Harness Kit) Switch Power (Harness Kit) Bracket Main SW Speaker Assy Duct Upper Duct Lower Plate Duct Fan Main Sensor Humidity (Temperature Sensor) Bracket Sensor Humidity Sensor (Temperature Sensor) PWBA MCU LVPS AIO, 100V, K LVPS AIO, 200V, K Power Cord 110V, North American (NEMA -1), 12V, 13A Power Cord, Cable Assy, UK, 20V Power Cord, Cable Assy, EUR, 20V Harness Assy Inlet AIO 100V (J~J1) (Harness Kit) Harness Assy Inlet AIO 220V (J~J1) (Harness Kit) Bracket Inlet 0K0 0K10 0K30 12E00 130E0 0K30 10K K E310 11E210 11E200 0K10 0K10-32 Phaser 10MFP Multifunction Printer Service Manual

33 Parts List 10.1 Wiring Harness (with Scanner) (J1) (J1) (J22) (J1) (J) (P11) (J2) (J11) (T1000) (J21) (J2) (P23) (J231) (P22) (J23) (J1) (J2) (P23) (P21) (J111) (T1001) (J02) 12 (J0A) (J0) (J) (J2) (J01) (J1) (J31) (P2) (J21) (J232) (J2) 1 (J10) (P1) 13 (P13) (P12) (J1)(J13)(J12) (J222) (J221) (P233) (P23) (J11) 1 (J0B) (J0) (J21) (P23) (J211) (P2) (J101) (J11) (J311) (J312) (J313) (J31) (J01) (J01) (P11) 1 (J0) s10mfp-223 Phaser 10MFP Multifunction Printer Service Manual -33

34 Parts List 10.1 Wiring Harness (with Scanner) ID No. Name/Description Part Number Harness Assy LVPS AIO (J1-J11, J01) (Harness Kit) 0K0 Harness Assy 2V AIO (J1-J02) (Harness Kit) Harness Assy Fuser AIO 100V (P11-J1, J) (Harness Kit) Harness Assy Fuser AIO 200V (P11-J1, J) (Harness Kit) Harness Toner Motor AIO (J1-P11, P12, P13, P1) (Harness Kit) Harness Assy Toner Sensor AIO (J1-J11, J12, J13, J1) (Harness Kit) Harness Assy CRU AIO (J31-J311, J312, J313, J31) (Harness Kit) Harness Assy ESS Power AIO (J0-N - J01-N) (Harness Kit) Harness Assy Right Side AIO (J21, J22, J23, J2, J2~J211, J221, J222, J231, J232, P233, P23, P23, P23, J21, P22, P23, J2, P2, P2) Harness Assy IF AIO (J10, J0A, J0-J101, J111, J01, J01) Harness Assy AIO-ESS (J-J0) (Harness Kit) Harness Assy HUM (J2-J21) (Harness Kit) Harness Assy Exit Clutch (J2-P21) (Harness Kit) Harness Assy Video AIO (J11-J111) (Harness Kit) Harness Assy Drive Earth AIO (T1000-T1001) CORE TFT N CORE TFT N 0K0 0K0 0K0 0K10 0K10 0K10 0K10 2K0 0K10 0K10 0K10 0K0 0K10-3 Phaser 10MFP Multifunction Printer Service Manual

35 Parts List 11.1 Scanner Assembly 1 (with 2,-) 3 2 (with 3-,10,11) Front 13 (P) (P) 1 1 (J1) 12 (J3) (J0) 1 (J2) s10mfp-22 Phaser 10MFP Multifunction Printer Service Manual -3

36 Parts List 11.1 Scanner Assembly ID No. Name/Description Part Number 1. ADF Scanner Assy (with 2, -) K1 2. ADF Assy (with 3-, 10, 11) 3. ADF Feed Roller. ADF Feed Roller Holder. ADF Separator Pad. ADF Separator Spring. Scanner Assy. Plate Sub. Screw 10. Kit Tray Main 0K Tray Extension 12. Core SFT-2SN 13. Core Assy FRC2 1. Core FRC Core Assy SC-1 1. Kit ADF Roll & Pad (with 3,,, ) 0K130-3 Phaser 10MFP Multifunction Printer Service Manual

37 Options Parts List 12.1 Duplex 2 P2 P1 12 Duplex Jam Sensor P P30 22 J301 J30 P31 P2 P J2 1 2 J2 J Front 20 1 (with 2~, ~20, 22~2) 2 s10mp-23 Phaser 10MFP Multifunction Printer Service Manual -3

38 Parts List 12.1 Duplex ID No. Name/Description Part Number 1. Kit Duplex Module (with 2-, -20, 22-2) K0 2. Stopper Latch Pivot 3. Handle Latch Duplex. Latch Duplex. Holder Main. Spring Chute Duplex. Bracket Holder Duplex Actuator Duplex 10. Spring Sensor Duplex 11. Holder Sensor Duplex 12. Sensor Photo (Duplex Jam Sensor) 13. Harness Assy Duplex Sensor (J30-J301) 1. Clamp Mini 1. PWBA Duplex 1. Cover PWBA Duplex 1. Cover Connect Duplex 1. Harness Assy Duplex Unit (J2-J211) 1. Holder Connect Duplex 20. Spring Connect Duplex Bracket Fan Duplex 23. Cover Harness Fan 2. Cover Harness Chute 2. Fan Duplex 2. Seal Duplex 2. Cover Chute Duplex -3 Phaser 10MFP Multifunction Printer Service Manual

39 Parts List 13.1 Optional-0 Sheet Feeder - Tray 3 (1 of ) [Ref PL13..1] 1 (with 2-10, PL ) (with 2, 12, PL13.2.) [Ref PL13.2] Front (with -) 10 3 s10mfp-22 Phaser 10MFP Multifunction Printer Service Manual -3

40 Parts List 13.1 Optional 0-Sheet Feeder - Tray 3 (1 of ) ID No. 1. Name/Description 0-Sheet Feeder (with 2-10, PL PL13.) Part Number 0K Screw Joint Block Safety Screw BTR Cabinet Assy Caster Caster-S Frame Base Foot Assy FL RR Foot Assy FR RL Cabinet Assy (with 2, 12, PL13.2.) Cabinet Assy AIO FDR (with -) -0 Phaser 10MFP Multifunction Printer Service Manual

41 Parts List 13.2 Optional 0-Sheet Feeder - Tray 3 (2 of ) 10 1 (with 1~, PL 13.3) 2 Front (J201) (J213) 3 [Ref PL13.3] s10mfp-2 Phaser 10MFP Multifunction Printer Service Manual -1

42 Parts List 13.2 Optional 0-Sheet Feeder - Tray 3 (2 of ) ID No. Name/Description Part Number 1. Cover Front Left 2. Cover OPF Left 3. Cover CST 0. Clutch Assy Turn Opt. Clutch Assy Feed Opt. Cover OPF Right. Cover Front Right. Feeder Assy Opt Cabinet (with 1-, PL13.3). Feeder Assy Option 10. Roll Assy Feed (Periodic Replacement Part - per 100K prints) 0K23 K0-2 Phaser 10MFP Multifunction Printer Service Manual

43 Parts List 13.3 Optional 0-Sheet Feeder - Tray 3 (3 of ) (J23) (with 13,1) Front 1 (with 1, 11, 12, 1) (J1) 1 (P222) (P221) 1 10 a a (P22) (P20) (P1) (P213) (P212) (J21) (P202) (P201) (P21) (P1) (J20) (J222) (J221) (P23) 1 (P211) (J211) (J22) s10mfp-22 Phaser 10MFP Multifunction Printer Service Manual -3

44 Parts List 13.3 Optional 0-Sheet Feeder - Tray 3 (3 of ) ID No. Name/Description Part Number 1. Frame Assy Opt Harness Assy Feeder Unit (J23-J1) Switch Assy Size Opt. PWBA Opt Feeder. Harness Assy C2 Chute (J21-J211, P212, P213). Harness Assy C2 Turn (J20-J201, P202). Harness Assy C2 Motor (J22-J221, J222) 10. Drive Assy Opt Feeder 11. Guide Tray Right Guide Assy 0 Left (with 13, 1) 13. Guide Tray Left Foot Clamp Mini Spring CST Lock Clamp Locking Frame Assy Opt (with 1, 11, 12, 1) - Phaser 10MFP Multifunction Printer Service Manual

45 Parts List 13. Optional 0-Sheet Feeder - Tray 3 ( of ) 2 (with 3,) 1 (with 2) 11 Front 3 (with ~11) s10mfp Phaser 10MFP Multifunction Printer Service Manual -

46 Parts List 13. Optional 0-Sheet Feeder - Tray 3 ( of ) ID No. Name/Description Part Number 1. Cassette Assy 0 Option (Tray 3) (with 2) 00K23 2. Cassette Assy Front 0 Opt (with 3, ) (Tray 3 Front Assy) 3. Housing Base FR 0 (Tray 3 Housing Base). Handle CST 0 Opt (Tray 3 Handle). Holder Assy Separator (with -11). CVR RTD CST (Tray 3 Retard Cover). Holder Separator. Shaft Separator. Clutch Friction RET (Clutch Friction Retard) 10. Roller Assy Retard (Periodic Replacement Part - per 100K prints) K0 11. Spring Separator - Phaser 10MFP Multifunction Printer Service Manual

47 Xerox Supplies and Accessories World Kit Description Part Number World Kit 0K2130 Consumables and Maintenance Items Parts List Reference PL2.2.1 PL3.2.3 PL Description Kit, Roll Assy Feed (100K) K0 PL.1.1 Kit Belt CRU (Transfer Unit) (100K) K0 PL.1.10 Fuser Assy - 11V (100K) K0 Fuser Assy - 230V (100K) K10 PL.1.1 Print Cartridge (K), High Capacity (K) 113R002 Print Cartridge (K), Standard Capacity (3K) Print Cartridge (K), Metered Print 113R R003 PL.1.1 Print Cartridge (C), High Capacity (K) 113R0023 Print Cartridge (C), Standard Capacity (2K) Print Cartridge (C), Metered Print 113R R0031 PL.1.1 Print Cartridge (M), High Capacity (K) 113R002 Print Cartridge (M), Standard Capacity (2K) Print Cartridge (M), Metered Print 113R R0032 PL.1.20 Print Cartridge (Y), High Capacity (K) 113R002 Options Parts List Reference Print Cartridge (Y), Standard Capacity (2K) Print Cartridge (Y), Metered Print Description Part Number 113R R0033 Part Number PL MB DDR2 Memory (1x 12 MB) 0K00 2 MB DDR2 Memory (1x 2 MB) 0K10 PL.1.23 Multi-Protocol Network Card K113 PL Kit Duplex Unit K0 PL Sheet Feeder 0K330 Phaser 10MFP Multifunction Printer Service Manual -

48 Power Cords Description Part Number Service Kits Kits Power Cord, North America (NEMA -1), 12 V, 13A 11E310 Power Cord, Cable Assy, UK, 20 V Power Cord, Cable Assy, EUR, 20 V 11E210 11E200 Service Kits are developed to provide an easy means to obtain spare parts normally associated with larger assemblies. A number of Service Kits have been developed for the Phaser 10MFP. The following tables list the contents for each kit. Pin Kit Parts List Reference Description.. Kit Pin BKY K32 Hardware Kit Parts List Reference Description.. Hardware Kit 0K3030 Packaging Kit Screw, Bind Head Del (1) Screw, mm Plastic (1) Screw, Tap Bind Head (1) Screw, M3x B (1) Screw, DT3x B (1) E-Ring, 3 mm (1) E-Ring, mm (1) Parts List Reference Description Part Number Packaging Kit Part Number Part Number K Phaser 10MFP Multifunction Printer Service Manual

49 Harness Kits Parts List Reference Description Part Number.. Kit Harness Front Cover 0K0 PL PL1.2.2 PL1.2.2 Harness Assy Front Cover (J22-P220, P221, T322-T3221) Harness Assy A-OP-OPP (J202-J301) Harness Assy A-OP-ESS (J3-P301).. Kit Harness Feeder/Fuser/Interlock 0K0 PL3.1.1 PL3.2.3 PL.2.3 Harness Assy MPT NPP (J2-J21) Harness Assy Regi Sensor (J232-J2321, J2322) Harness Assy Interlock AIO PL Harness Assy LVPS AIO (J1-J11, J01) PL10.1. PL10.1. PL10.1. PL Harness Assy 2V AIO (J1-J02) Harness Assy Fuser AIO 100V (P11-J1, J) Harness Assy Fuser AIO 200V (P11-J1, J) Harness Assy Exit CLT (J2-J21).. Kit Harness Power Switch 0K10 PL.2. PL.2.1 PL.2.1 PL10.1. PL10.1. PL10.1. PL Power Switch Harness Assy Inlet AIO, 100 V (J-J1) Harness Assy Inlet AIO, 220 V (J-J1) Harness Toner Motor AIO (J1-P11, P12, P13, P1) Harness Assy Toner Sensor AIO (J1-J11, J12, J13, J1) Harness Assy CRU AIO (J31-J311, J312, J313, J31) Harness Assy ESS Power AIO (J0N-N - J01-N) PL Harness Assy IF AIO (J10, J0A, J0- J101, J111, J01, J01) PL Harness Assy AIO-ESS (J-J0) PL Harness Assy HUM (J2-J21) PL Harness Assy Video AIO (J11-J111) Phaser 10MFP Multifunction Printer Service Manual -