@mdmetric.com. and Metrics. RoHS compliant. The smallest size C-Lube Cam Follower with 5mm stud diameter is newly added!

Transcription

1 and Metrics The smallest size C-Lube Cam Follower with stud diameter is newly added! ohs compliant CAT-.2 CAT-.2

2 eliable by abundant actual Performance and quality substantiated operation results and oller Followers and oller Followers are bearings with a small coefficient of friction and excellent rotating performance designed for rotation, having a in which needle rollers are assembled in a thick. Guiding is performed while the external diameter surface of the is in direct contact with the mating track surface. In these bearings, the radial clearance is designed to be a small to effectively increase the load area. Accordingly, the impact load is relieved, resulting in a stable long life. Series O w rde em eb: r f r h ai tt om l: p: M sa // le md ary s@ m la n e m tr d dm ic. M et com etri cs ric.c om Many s of with a stud and oller Followers with an assembled inner ring are available as a series. The customer can select the optimum bearing for every operating condition. These products are widely used in the cam mechanism and the linear motion portion of General description Page Dimension table Page Presentation of actual operation example Page Presentation of products for special applications Page a transport system. To page oller Followers The mating track surface is also maintenance free. External lubricating part for "C-Lube Unit" Further applicable to a stud diameter of to C-Lube Unit for C-Lube Unit C-Lube oller Followers Series General description Page 7 Dimension table Page 7 Presentation of actual operation example Page 7 2

3 Index Series Description Advantage of... Identification umber... Load ating and Life... Allowable Static Load... Accuracy... 2 Clearance Fit Track Capacity... 2 Allowable otational Speed... Lubrication... Oil Hole... 2 Accessories... 2 Optional Specification... 2 Operating Temperature ange Mounting Precaution for use... 2 C-Lube unit for... Dimension Tables Miniature Type... CFS... Thrust Disk Type Miniature... CFSW... Standard Type... CFB... Thrust Disk Type... CFWB... C-Lube... CFWB/SG... Solid Eccentric Stud Type... CFESB... Eccentric Type... CFEB... Centralized Lubrication Type... CF-U,CF-FU... Easy Mounting Type... CF-SFUB... Cylindrical oller... UCFB... Inch Series C... CB,C... Inch Series CH... CHB,CH... eady-made Track for... TLA,TLB... 7 oller Follower Series Description Advantage of oller Followers... 7 Identification umber... 7 Load ating and Life... 7 Allowable Static Load... 7 Accuracy... 7 Clearance... 7 Fit... 7 Track Capacity Allowable otational Speed... 7 Lubrication... 7 Oil Hole... 7 Mounting... 7 Dimension Tables Separable oller Followers... AST,AST... 7 on-separable oller Followers... AT... Cylindrical oller Followers... UT... on-separable oller Followers, Inch Series... CY... 7 ApplicationsSpecial SpecificationsMiscellaneous Tables Applications... Special Specifications... Miscellaneous Tables... Series Description Advantage of Identification umber Load ating and Life Allowable Static Load Accuracy Clearance Fit Track Capacity Allowable otational Speed Lubrication Oil Hole Accessories Optional Specification Operating Temperature ange Mounting Precaution for use C-Lube unit for Dimension Tables Miniature Type Thrust Disk Type Miniature Standard Type Thrust Disk Type C-Lube Solid Eccentric Stud Type Eccentric Type Centralized Lubrication Type Easy Mounting Type Cylindrical oller Inch Series C Inch Series CH eady-made Track for 7

4 CF Stud End plate eedle roller Cage End plate are bearings provided with a stud in which needle rollers are assembled in a thick, having a small coefficient of friction and excellent rotating performance designed for rotation. These products having high rigidity and accuracy are widely used for machine tools, industrial robots, electronic parts, OA devices as follower bearings for various cam mechanisms and guide rollers for linear motion. The head of the stud is provided with a hexagon hole so that it can be surely tightened with a hex wrench. I t s original lubrication permits a grease-up operation from the head of the stud, so this allows the user to make a system design freely without any limitation on the direction of lubrication. Stud Outer ring Outer ring ohs compliant Hexagon hole Grease nipple Standard Type ariety and Originality Cam Follower Series with reliability and actual operation results Full product lineup The product lineup including the miniature with very small dimensions, provided with a thrust w a s h e r s t r o n g i n a n m o u n t i n g e r r o r, a n d maintenance-free with a prepacked solid lubricant is complete. To page Abundant product specifications selectable for each application The customer can select the optimum product specifications including material, roller guide, seal section, and external diameter surface of according to each application. The head of the stud is provided with a hexagon hole and this permits easy mounting with a hex wrench. 7 To page Provided with a hexagon hole that facilitates mounting To page original that permits lubrication from the head of the stud Grease-up can be performed from the head of the stud though the product is provided with a hexagon hole. The direction of lubrication is not limited. To page Cam Followe Hexagon hole eedle roller Miniature Type C-Lube Unit for based on a new concept C-Lube Unit to supply the lubricant to the external diameter surface of the and the track surface of Cam Followers. If this product is combined with, periodic lubrication on the track surface is not required and friction and abrasion can be reduced. To page 7

5 Full product lineup Miniature Type CFS In this bearing, very thin needle rollers are assembled in the. This product is designed as a compact with a small external diameter of the for the stud diameter. The product is used in electronic parts, OA devices, miniature index devices, etc. Cage CFS End plate eedle roller Outer ring Stud CFS Thrust Disk Type Miniature CFS W Miniature Type which is provided with a thrust disk made of special synthetic resin excellent in abrasion resistance and heat resistance. This product receives an axial load of the that is caused by mounting error to reduce friction and abrasion of the slide surface. The smallest in the world with such a small stud diameter of. CFS.W with a stud diameter of. and a small external diameter of only of the. The built-in thrust disk receives an axial load of the that is caused by mounting error. Five features of CFS.W The stud 2 The external Provided with a diameter is only.. diameter of the is only. End plate eedle roller Outer ring Stud hexagon hole that facilitates mounting with a large load capacity Provided with a thrust disk that is strong in mounting error Material Material F Stud diameter 2 to Carbon steel Stud diameter. to Stainless steel Shield ed Cylindrical Crowned F To page Carbon steel Stainless steel Shield ed Cylindrical Crowned Standard Type CF B This is a basic of. The available size variation of stud diameter ranges from min. to max. Thrust Disk Type CF WB This product is provided with a thrust disk made of special synthetic resin excellent in abrasion resistance and heat resistance, so this thrust disk receives an axial load of the that is caused by mounting error to prevent the slide surface against friction and abrasion. Thrust disk Outer ring eedle roller End plate Thrust disk Stud diameter to Cage Stud Material F Carbon steel Stud diameter to Stainless steel Shield ed Cylindrical Crowned Material F To page Carbon steel Stainless steel Shield ed Cylindrical Crowned To page To page 7

6 Full product lineup 2 C-Lube CF WB /SG This is a maintenance-free product in which the thermosetting solid lubricant "C-Lube" is prepacked in the bearing clearance. "C-Lube" is a lubricant resulting from thermosetting a lot of lubricating oil and fine-particle ultra polymeric polyolefin. When the bearing rotates, a proper quantity of lubricant always oozes out onto the raceway from "C-Lube" to keep the lubricating performance of the bearing for a long time. otation endurance test Test conditions Sample CFWB/SG Lubricating condition C-Lube only without grease prepacked otation speed rpm Ambient temperature oom temperature esidual ratio of lubricating oil% 7 2 Thrust disk C-Lube Stud diameter to F Maintenance-free & ecology Test result C-Lube Material 2 Operating timemin A combination with C-Lube unit for is most suitable A combination with " C-Lube unit for Cam Followers" makes both inside of Cam Follower and track surface maintenance-free. Carbon steel Stainless steel Shield ed Cylindrical Crowned To page Solid Eccentric Stud Type CFES B As the solid eccentric stud is rotated, the external diameters of the s can be leveled when several pieces are used. The eccentric amount is.2 to. and this product can be mounted in the same mounting hole as the Standard Type. Eccentric Type CFE B Because the eccentric collar is fixed on the stud, positioning in the radial direction for the mating track surface can be easily performed. The eccentric amount is. to.. Eccentric stud Stud diameter to Material Eccentric amount (.2 to.) F To page Stud diameter to Material Eccentric amount (. to.) F Carbon steel Stainless steel Shield ed Cylindrical Crowned Carbon steel Stainless steel Shield ed Cylindrical Crowned To page Eccentric Collar 7 To page

7 Full product lineup Centralized Lubrication Type CF-U, CF-FU A tap hole for centralized piping is made on the head of the stud. This product is most suitable for a position requiring centralized lubrication piping. Tap for centralized piping Easy Mounting Type CF-SFU B Shouldering is already performed on the stud. This facilitates mounting to fix the shoulder portion with a set screw from the top surface. This product is most suitable for applications such as pallet changer. Stud diameter to Material F FU U Carbon steel Stud diameter to Stainless steel ed Cylindrical Crowned To page Material F Carbon steel Stainless steel ed Cylindrical Cylindrical oller UCF B This product is a full complement bearing in which cylindrical rollers are assembled on the in a multiple-row form, and can receive a large radial load and a certain level of axial load. Inch Series C B, CH B Cylindrical roller The two s of Inch Series, C and CH, are lined up. The CH is applicable to a heavy load with a large rated load and has undergone black oxide film treatment. Stud diameter to Material F Stud diameter Carbon steel Stainless steel Shield ed Cylindrical Crowned To page.2 to. Material F Carbon steel Stainless steel Shield ed Cylindrical Crowned Shouldering To page To page 2

8 Abundant product specifications that can be selected according to each application Product system of Bearing Miniature Type CFS Thrust Disk Type Miniature CFS Standard Type CF B Thrust Disk Type CF WB C-Lube CF WB /SG Solid Eccentric Stud Type CFES B Eccentric Type CFE B Centralized Lubrication Type CF-U CF-FU Material Carbon steel made Stainless steel made Carbon steel made Stainless steel made Carbon steel made Stainless steel made Carbon steel made Stainless steel made Carbon steel made Carbon steel made Hex Head Type oller guide Shield Shield Shield Shield Shield Shield Shield Shield ed Shield ed Shield ed ed the external diameter surface of Cylindrical Cylindrical Cylindrical Cylindrical Cylindrical Cylindrical Cylindrical Crowned Crowned Crowned Crowned Crowned Cylindrical Crowned Cylindrical Crowned Cylindrical Model number CFS CFS CFS CFS CFS CFS CFS CF WB CF WB CF FWB CF FWB CFES B CFES B CFES B CFES B CF-U CF-FU Stud diameter () Page Page Page Page Page Page Page Page Page Page Page Carbon steel made ed Crowned CF WB/SG Page Carbon steel made section Shield ed Shield ed Shield ed Crowned Cylindrical Crowned Cylindrical Crowned Cylindrical Crowned Cylindrical Crowned Cylindrical Crowned Cylindrical CF B CF B CF B CF B CF B CF B CF B CF B CF FB CF FB CF FB CF FB Shield ed Shield ed Crowned Cylindrical Crowned Cylindrical Crowned CFE B CFE B CFE B CFE B CFE B CFE B CFE B CFE B Cylindrical Crowned Cylindrical Dimension table Page Page Page Page Page 7 Page 7 Page 7 Page 7 Page Page Page Page Page Page Page Page Page Page Page Page Page 7 Page 7 Page 7 Page 7 Page Page Material In addition to the carbon steel made, the stainless steel made is also available. The stainless steel made is suitable for an environment and a clean room where oil should be avoided or water is scattered. The caged has a small coefficient of friction and is suitable for high-speed rotation. The full complement is suitable for low-speed rotation, rocking motion, and places to which a heavy load is applied. Comparison in maximum rotation speed otation speed min - 2 The shield reduces the clearance between the and stud collar section and between the and end plate, forming a labyrinth. The sealed consists of seals to prevent foreign substances from entering. the external diameter surface of The crowned is effective in relieving an end load due to mounting error. The cylindrical is suitable for the case where the actual load is large or the track surface is not so hard. Comparison in track Capacity 2 Size section oil lubrication oil lubrication grease lubrication grease lubrication Carbon steel made For general applications For a place with a high rotation speed Comparison in dynamic rating load Basic dynamic rated load 7 For low-speed rotation or heavy load 2 For general applications Shield For relieving a mounting error Stainless steel made Places where oil should be avoided or water is scattered Size For dust prevention or grease leak prevention ed For a large actual load or an insufficient hardness of track surface Easy Mounting Type CF-SFU B Cylindrical oller UCF B Carbon steel made ed Cylindrical CF-SFU B Page Carbon steel made Shield Crowned UCF B Page Load capacity 7 Crowned Cylindrical Crowned Crowned Cylindrical * For the product system of Inch Series, refer to the dimension tables on page to page Size

9 Hexagonal head that can be easily mounted original that permits lubrication from the head of the stud Tightening can be surely performed on the head of the stud from the hexagon hole with a hex wrench. Mounting can also be performed easily to greatly improve the workability. Stud tightening can be performed easily and surely with a hex wrench. Hex wrench * Centralized Lubrication Type have a screw driverslot. with Hexagon Hole Series to which the hex head is applicable Series name Type Miniature Type CFS Thrust Disk Type Miniature CFS W Standard Type CF B Thrust Disk Type CF WB C-Lube CF WB /SG Solid Eccentric Stud Type CFES B Eccentric Type CFE B Easy Mounting Type CF-SFU B Cylindrical oller UCF B Inch Series C B, CH B Hexagon hole Easy Mounting Stud diameter 2 to. to to to to to to to to.2 to. Original lubrication with Hexagon Hole permit lubrication from the head of the stud. Lubrication can be performed from any of directions with the same external dimensions. Way A grease nipple is incorporated in the hexagon hole. Way Way Stud dia. 2 to 2 Way Stud dia. to As this is assembled in the end face of the stud, the external dimensions remain without change. Attached grease nipple Lubrication port can be chosen from three directions. It allows flexible designing and maintenance. The nipple at the end of the stud is kindly designed so as to avoid any projection. Conventional It is also unnecessary to select the cap or grease nipple according to the direction of lubrication. Lubrication can be performed from the head of the stud. ote Miniature Type, Thrust Disk Type Miniature Cam Followers, stud diameters of and of Standard Type, C-Lube, and Inch Series Cam Followers are excepted. 2 For Eccentric Type, the stud screw diameter G shown in the dimension table is applied. For Easy Mounting Type, the -way is applied to all the sizes. The grease nipple on the end face side of the stud is attached as an accessory.

10 C-Lube Unit for based on a new concept C-Lube Unit C-Lube Unit for CL C-Lube Unit for is a lubricating part to be mounted in. Periodic lubrication is not required because this product supplies the lubricating oil that is indispensable for the external diameter surface of the and track surface of. Lubrication onto the track surface is not required for a long time. If a shortage of oil occurs, abrasion will be caused by reddish brown rust. If grease is too much, it will scatter and cause environmental pollution. C-Lube ote Purchase this product separately from C-Lube Unit. This lubricator is made of the inter-porous sintered resin resulting from sintering and forming fine resin powder, and impregnates a large quantity of l u b r i c a t i n g o i l b y u s i n g a capillary phenomenon to be caused in the internal space. Before impregnation esin portion Melting coupling esin particles are coupled by melting. There are many spaces. After impregnation Lubricating oil portion Lubricating oil is kept in the spaces of resin particles. CL To page Lubricating oil will be continuously supplied for a long time. C-Lube Unit CL Capillary lubricator Applications of A long-time maintenance-free status of the track surface has been achieved. "Conventional cam followers" Without changing the mounting dimensions and Endurance test Sample Lubricating condition speed Stroke length Track surface specifications Ambient temperature Test conditions 2 A combination with C-Lube Unit for CL CL2, C-Lube Unit for CF2WB/SG, C-Lube C-Lube Unit only without prepacked grease /s Material SKD Hardness HC or more Surface roughness z:. m or less oom temperature If CL is combined ote are offset several in the axial direction according to the thickness of the CL resin cover. esidual ratio of lubricating oil% Lubrication maintenance is not required for a long time. The performance of CL has been substantiated by endurance test result. ote 2 Endurance is checked by using the ground track surface. For operating in the other conditions, the customer is requested to make a check with its own machine. Solid lubrication provides long time operation free from re-lubrication. Inside of Test result 7 2 C-Lube Unit for unning distancekm Sample Sample 2 C-Lube Track surface C-Lube is the most desirable. Track surface Full Maintenance Free eddish brown abrasion powder is generated. The circumference is made sticky by grease. This can prevent the ambient environment from being polluted. 7 C-Lube (Solid Lubrication) eedle oller C-Lube CF WB /SG C-Lube (Solid Lubrication) C-Lube Unit for CL emark C-Lube Unit can be combined with Standard Type, Thrust Disk Type, C-Lube, Centralized Lubrication Type, or Cylindrical oller.

11 Identification umber Load ating and Life Some examples of the identification number of are shown below. For applicable material symbol, roller guide method, seal and shape of outside surface, refer dimension table of each series. Examples of identification number Example Example 2 Example Example Model number CFS Miniature Type Cam Follower CFSW Thrust Disk Type Miniature Cam Follower CFB Standard Type Cam Follower CFWB Thrust Disk Type Cam Follower CFWB/SG C-Lube Cam Follower CFESB Solid Eccentric Stud Type Cam Follower CFEB Eccentric Type Cam Follower CF-U Centralized Lubrication Type Cam Follower (With crowned ) CF-FU Centralized Lubrication Type Cam Follower (With cylindrical ) CF-SFUB Easy Mounting Type Cam Follower UCFB Cylindrical oller Cam Follower CB Inch series Cam Follower(With Hexagon socket) C Inch series Cam Follower(With Screw driverslot) CHB Inch series Cam Follower(With Hexagon socket) CH Inch series Cam Follower(With Screw driverslot) Size The value indicates a stud diameter. (unit: ) In the inch series, the outside diameter of the outer ring in units of / inch is indicated. Material F High carbon steel made Stainless steel made CFS CF CF CF F F W W B B B method With cage ote( ) Cylindrical oller Cam Follwer is Full conplement with "o Symbol". P /SG Basic dynamic C The basic dynamic is defined as the constant radial load that % of a group of identical can be operated,, revolutions individually under the same conditions free from any material damage caused by rolling fatigue. Basic static C The basic static is the static radial load constant in direction and magnitude that gives the contact stress shown at the center of the contact area of the rolling element and the raceway receiving the maximum load. Bearing life Basic rating life is calculated as following fomula. C L P r / where, L Basic rating life, rev. C Basic dynamic, P r Dynamic equivalent radial load, Accordingly, when the rotational speed per minute is given, the basic rating life is represented as the total service hours according to the following equations: L h L 2 n where, L h Basic rating life represented by service hours, h n otation speed, min - Static Safety factor The static safety factor f s is defined as in the following equation and its general values are shown in Table. C f s P r where, C Basic static, P Static equivalent load, Table Static safety factor Operating conditions of the bearing When high rotational accuracy is required For ordinary operation conditions f s. Load factor It is not unusual for the actual loads to exceed the calculated loads, due to vibration and shocks produced when operating the machine. The actual bearing load is obtained by multiplying the calculated load by the load factor shown in Table 2. Table 2 Load Factor Operating conditions Smooth operation without shocks Ordinary operation Operation subjected to vibration and shocks f w Allowable Static Load The applicable load on is, in some cases, limited by the bending strength and shear strength of the stud and the strength of the instead of the of the needle roller bearing. Therefore, the maximum allowable static load that is lmited by these strengths is specified. Shield ed ote( ) Centralized Lubrication Type and Easy Mounting Type are sealed Type with "o Symbol". For ordinary operation conditions not requiring very smooth rotation When there is almost no rotation outside surface With crowned With cylindrical Classification symbol Class P Class P Class P Class Applicable to Miniature CFS series =.2kgf=.2lbs. =.7inch

12 Accuracy Clearance The accuracy of is shown in Table, Table., Table.2 and Table.. with special accuracy are also available. When they are required, please contact. Table Tolerances Dimensions and symbols Outside dia. of D Stud dia. d Width of C Series Miniature CFS series See Table. h Crowned Metric CF series h7 ote( ) Also applicable to the entire except Miniature series and Inch series. Cylindrical Table. Tolerances and allowable values of s (Miniature CFS series) Class Dmp Single plane mean outside dia. deviation High Low High Low High Low High Low Crowned Inch series See Table.2 See Table. 2 unit: m Cylindrical K ea adial runout of assembled bearing (Max.) Class Class Class Class Class Class Class 7 Table.2 Tolerances and allowable values of s (Metric CF series cylindrical s) D ominal outside dia. of Table. Tolerances and allowable values of s (Inch series cylindrical ) D ominal outside dia. of Dmp Single plane mean outside dia. deviation Over Incl. High Low Dmp Single plane mean outside dia. deviation Over Incl. High Low Dsp Outside dia. variation in a single radial plane (Max.) Dsp Outside dia. variation in a single radial plane (Max.) Dmp Mean outside dia. variation (Max.) 2 Dmp Mean outside dia. variation (Max.) 7 unit: m K ea adial runout of assembled bearing (Max.) 2 unit: m K ea adial runout of assembled bearing (Max.) unit: m The radial internal clearances of are shown in Table. Table adial internal clearance Miniature CFS series CFS, CFS W Fit CFS. CFS CFS CF B CF B CF B UCF-B UCF-2B 2 ote( ) Only representative s are shown in the table, but this table is applicable to the entire except Miniature series, Cylindrical oller, and Inch series. Tables and 7 show recoended tolerances of mounting holes for Cam Follower studs. Since the Cam Follower is supported in a cantilever position, the mounting hole diameter should be prepared without play between the stud and the hole especially when heavy shock loads are applied. Table ecoended fit Miniature CFS series Metric CF series Type Metric CF series CF B CF2-B CFB CF-B CFB CF-2B Cylindrical oller Inch series F7 ote( ) Only representative s are shown in the table, but this table is applicable to the entire Cam Followers except Miniature series and Inch series. UCF B UCF B Table 7 Dimensional tolerances of mounting hole ominal outside dia. of stud Over Incl. Over Incl. F7 Tolerance class of mounting hole for stud H H7 C C -CH -CH CC-CH-CH C2 C22CH2 CH22 C CCH CH Over CCH CH H Inch series Incl. CH unit: m adial internal clearance Over Min. H7 Max. 7 2 Incl. unit: m =.2kgf=.2lbs. =.7inch 22

13 Track Capacity Allowable otational Speed Track capacity is defined as a load which can be continuously applied on a Cam Follower placed on a steel track surface without causing any deformation or indentation on the track surface when the of the Cam Follower makes contact with the mating track surface (plane). The track capacities shown in Tables.,.2 and. are applicable when the hardness of the mating track surface is HC (Tensile strength /2). When the hardness of the mating track surface differs from HC, the track capacity is obtained by multiplying the value by the track capacity factor shown in Table. If lubrication between the and the mating track surface is insufficient, seizure and/or wear may occur depending on the application. Therefore, attention must be paid to lubrication and surface roughness of the mating track especially for high-speed rotations such as cam mechanisms. For lubrication between the and the mating track surface, C-Lube Unit for is recoended. Table. Track Capacity for Miniature Type Cam Follower CFS, CFS W with cylindrical CFS. CFS2 CFS2. CFS CFS CFS CFS Track capacity Table. Track capacity for Inch series With crowned C C - C C- C2 C C C C C22 C C2 C2 C C2 C Track capacity With cylindrical C C - C C- C2 C C C C C22 C C2 C2 C C2 C C unit: Track capacity Table.2 Track capacity for Metric series Cam Follower With crowned Track capacity With cylindrical unit: Track capacity CF B 2 CF B CF B 72 CF B 7 CF B 7 CF B 2 CF B CF B CF B CF B CF B CF-B CF2 B CF2-B CF B CF B CF B CF-B CF B CF-B CF B CF-B CF-2B CF B CF-B CF2 B CF2-B CF B CF B CF B CF-B CF B CF-B CF B CF-B CF-2B ote( ) This table is applicable to the entire except Miniature series and Inch series. With crowned CH - CH CH- CH CH2 CH CH CH CH CH22 CH CH2 CH2 CH CH2 CH CH CH CH CH2 CH CH Track capacity With cylindrical CH - CH CH- CH CH2 CH CH CH CH CH22 CH CH2 CH2 CH CH2 CH CH CH CH CH2 CH CH unit: Track capacity Table Track capacity factor Hardness HC Tensile strength / unit: Track capacity factor With crowned With cylindrical The allowable rotational speed of is affected by mounting and operating conditions. For reference, Table shows d n values when only pure radial loads are applied. Considering that axial loads also act under actual operating conditions, the recoended d n value is / of the value shown in the table. In case of C-Lube Cam Follower or with C-Lube unit, d n value is or less. In case of C-Lube Cam Follower or with C-Lube unit with axial loads, d n value is or / of the values in Table, whichever smaller. Table d n values of Type Cylindrical oller ote( ) Lubrication 2 7 Grease-prepacked are shown in Table. The lubricating grease prepacked in these bearings is ALAIA GEASE S2 (SHELL). For without prepacked grease, grease should be packed through the oil hole in the stud for use. If they are used without grease, wear of rolling contact surfaces may take place, leading to a short bearing life. Table Grease-prepacked With prepacked grease Without prepacked grease Type With cage Full Series complement Size of stud dia. d Shield ed CFS Miniature series CFS W Metric series CF B CF WB CFES B CFE B C-Lube CF WB /SG 2 Inch series Lubricant d n value d n where, d Stud diameter n otational speed rpm Centralized Lubrication Type Easy Mounting Type Cylindrical oller CF U CF FU CF SFU B UCF B C B C d d 2d Grease CH B Inch series CH otes( ) For Eccentric Type (CFE), thread diameter G shown in the table of dimensions is applicable. ( 2 ) This Cam Follower incorporates C-Lube which includes a large amount of lubricating oil. Oil 2 =.2kgf=.2lbs. =.7inch

14 Oil Hole Accessories Optional Specification The position of oil hole is shown in Table 2. e-greasing cannot be made for models without a oil hole. Grease should be supplied gently with a straight grease gun as specified by JIS B :, which is applied carefully to the nipple head from the front. When PT grease nipple on Table or PB grease nipple on Table is attached on stud end, it is possible to lubricate with a general grease gun from PT or PB grease nipple without lubrication nozzle on Table. Some of that oil hole is not prepared on Table 2 cannot be lubricated. Table 2 Position of oil hole Oil hole is prepared. Position of oil hole Series Stud Stud Stud Size of stud dia. d head outside end surface Miniature Type Cam Follower CFS Thrust Disk Type Miniature Cam Follower CFS W Standard Type Cam Follower CF B Thrust Disk Type Cam Follower CF WB Solid Eccentric Stud Type Cam Follower CFES B Eccentric Type Cam Follower CFE B Cylindrical oller Cam Follower UCF B C-Lube Cam Follower d d d CF WB /SG 2 Centralized Lubrication Type Cam Follower CF U, CF FU Easy Mounting Type Cam Follower CF SFU B Inch series Cam Follower C B (With Hexagon socket) Inch series Cam Follower C (With Screw driverslot) Inch series Cam Follower CH B (With Hexagon socket) Inch series Cam Follower CH (With Screw driverslot) d 2 2d d d d.. d d.. d d 7. 7.d d 7. 7.d 2 otes( ) In case of Eccentric Type (CFE), thread diameter G shown in the table of dimensions is applicable in place of stud dia. and the oil hole on the outer surface of the stud cannot be used for lubrication. ( 2 ) e-lubrication can be made from the re-greasing fitting that is inserted into the hexagon hole. ( ) Grease nipple is incorporated in the hexagon hole. egreasing can be made from the stud head and the stud end by press fitting a supplied grease nipple into the stud end. ( ) Tapped holes for oil connectors are provided at the stud end and hole of the head. ( ) e-greasing can be made from the grease nipple in the hexagon hole. Table Type and Dimension of Lubrication ozzles Type A-2T A- B- A- A- B- B Dimension 2 Width across flats 2 Width across flats 2 Width across flats 2 Width across flats 2 Width across flats 2 Width across flats 2 Width across flats 2 Width across flats 2 PT/ Width across flats 2 PT/ Width across flats 2 Width across flats 2 PT/ PT/ Width across flats 2 PT/ PT/ Width across flats 2 Width across flats 2 PT/ Applicable grease nipple and re-grease fitting PF- PF- e-grease fitting PF- PF- PT- PT- PB2 PB PB- PB ote( ) HSP-(Yamada Corporation)can be used for them. emark The above nozzles can be atached on the standard grease gun shown below. If required, please consule to with of lubrication ozzle. Lubrication ozzle Body of grease gun Cam Follower accessories are shown in Table. Grease nipple dimensions are shown in Table. Dimensions of plug for unused oil hole and dimensions of plug inserter are shown in Table 7. Table Accessories Series Size of stud dia. d Miniature Type Cam Follower Thrust Disk Type Miniature Cam Follower Table Dimensions of grease nipple for standerd Cam Follwer Code number PF- PF- CFS Accessories CFS W Dimensions d D L W. 7 2 Grease nipple ut Size of stud dia. d 2 2 Spring washer Standard Type Cam Follower CF B Thrust Disk Type d Cam Follower CF WB Solid Eccentric Stud Type Cam Follower CFES B Cylindrical oller 2d Cam Follower UCF B C-Lube Cam Follower CF WB /SG Eccentric Type Cam Follower d CFE B 2d Centralized Lubrication Type Cam Follower CF UCF FU Easy Mounting Type Cam Follower CF SFU B Inch series Cam Follower C B (With Hexagon socket) d..2d Inch series Cam Follower C (With Screw driverslot) Inch series Cam Follower CH B (With Hexagon socket) d 7..2d Inch series Cam Follower CH (With Screw driverslot) ote( ) For Eccentric Type Cam Follower CFE, thead diameter G is applied. Plug Attached otes( ) This table is applicable except Inch series. ( 2 ) For Eccentric Type Cam Follower CFE, thead diameter G is applied. Table Dimensions of Grease nipple for Inch series Code number PB2 PB PB- PB Dimensions d D D L L W Applicable C C-CH- CH C2 C22CH2 CH C CCH CH.. 2 CCH CH Table 7 Dimensions of plug for Inch series Code number USB2F USBF USBF Dimensions of plug Dimension of inserter D t B d. Applicable C C C2 CCH2 CH....2 CCH CH PT grease nipple in Table can be attached instead of standard accessories by direction. With PT grease nipple, it is possible to lubricate with a general grease gun (JIS B :) without lubrication nozzle on Table. If required, please order with supplemental code, "/P" at the end of identification number. Example of Identification umber. CF 2 B P Table Dimension of PT grease nipple. Code number Dimension of grease nipple Size of stud dia. d d D D L L W PT- PT ote( ) For Eccentric Type Cam Follower CFE, thead diameter G is applied. Table Dimension of assembled PT grease nipple. Code number Dimension Size of stud dia. d B B PT- PT ote( ) For Eccentric Type Cam Follower CFE, thead diameter G is applied. Inserter Stud 2 =.2kgf=.2lbs. =.7inch 2

15 Operating Temperature ange Mounting The operating temperature range for is - C + C. Please pay attention as the s shown in table have different range. Table estricted Operating Temperature ange Type Size of stud dia. d Miniature Type CFS Thrust Disk Type Miniature CFS W Standard Type CF B Thrust Disk Type Stainless Steel Standard Type CF FB Stainless Steel Thrust Disk Type CF FWB CF WB Type d 2 C-Lube d CF WB /SG otes( ) degree C in continuous operation. ( 2 ) degree C or lower is recoended in long time. With cage Shield ed d d d 2 Make the center axis of the mounting hole perpendicular to the moving direction of the Cam Follower and match the side shoulder accurately with the seating surface indicated by dimension f in the table of dimensions. (See Fig..) Then, fix the Cam Follower with the nut. Do not hit the flange head of the Cam Follower directly with a haer, etc. This may lead to a bearing failure such as irregular rotation or cracking. Fig. Seating surface 2 The mark on the flange head of the stud indicates the position of the oil hole on the raceway. Avoid locating the oil hole within the loading zone. This may lead to a short bearing life. (See Fig. 2.) The hole located in the middle part of the stud perpendicular to the stud center axis is used for greasing or locking. Load Oil Hole Solid Eccentric Stud Type and Eccentric Type, are mounted in reference position where mark on the head of stud is located as Fig.. The position can be adjusted appropriately by turning the stud with a screwdriver or hexagon bar wrench using the screwdriver slot or hexagon hole of the stud head. The stud is fixed with a nut and a spring washer, etc. The tightening torque should not exceed the values of maximum tightening torque shown in the table of dimensions. When shock loads are applied and the adjusted eccentricity has to be ensured, it is recoended to make holes in the housing, stud and eccentric collar, and fix the stud with a dowel pin as shown in Fig.. However, when the stud diameter is less than (Eccentric collar diameter ), it is difficult to make a hole in the stud because the stud is through-hardened. Eccentricity Load Stud dia. Fig. eference position for adjusting of Solid Eccentric Stud Type and Eccentric Type Cam Follwers Dowel pin Fig. Mounting example of Solid Eccentric Stud Type Cam Follower In case of Eccentric Type (CFE), the length of the mounting hole should be more than. longer than the dimension B (Eccentric collar width) shown in the table of dimensions. (See Fig..) Eccentric callor is available for Inch series. with Eccentric collars, CE are also available. If required, please consult with. Table 2 Eccentric collars for Inch series Cam Followers Identifical number of collar EB EB EB2 EB EB EB EB2 EB2 EB unit: Outer diameter Length Eccentri Applicable of collar of collar city Stud dia. de B d. ( ). ( )..2 C C - ()(B)()().2 ( ).2 ( ). C. ( ) ()(B)()() C- 2.7 ( 2 ) 2.7 ( 2 ). C2.2 ( ) C ()(B)()() C.7 ( ).7 ( ).7.2 ( 7 ) C ()(B)()() C ( 2 ) C22 ()(B)()() C ( 7 ) ( 7 ).7.7 ( ) C2 ()(B)()() 2. ( ) 2. ( C2 ).7. ( ) C ()(B)()().. C ( 7 ) C ()(B)()(). ( ). ( )..7 ( ) C 7 For mounting Easy Mounting Type, it is recoended to fix the fixing screw from the upper side to the stepped portion of the stud. (See Fig..) Fig. Mounting example of Easy Mounting Type Cam Follower Fig. 2 Oil hole position and loading direction Precaution For Use When tightening the nut, the tightening torque should not exceed the values shown in the table of dimensions. If the tightening torque is too large, it is possible that the threaded portion of the stud will be broken. When there is a possibility of loosening, a special nut such as a lock nut, spring washer, or self-locking nut should be used. Fig. Length of the mounting hole of Eccentric Type Cam Follower Do not wash C-Lube Cam Follower with organic solvent and/or white kerosene, which have the ability of removing fat nor leave them in contact with the above agents. 2 To ensure normal rotation of the C-Lube Cam Follower, apply a load of % or over of the dynamic at use. 27 =.2kgf=.2lbs. =.7inch 2

16 C-Lube Unit for Structure of C-Lube Unit for C-Lube unit C-Lube Magnified photos of C-Lube Before impregnating oil After impregnating oil Table 22 Dimensions of C-Lube Unit for The identification number example of shown below. Allowable rotation speed C-Lube Unit is The rotation speed of Cam Follower with C-Lube Unit should not exceeded d n=, for reference. d n=d n d : Stud diameter of Cam Follower, n : otational speed, rpm Minimum rotational angle Lubricating oil is supplied to the whole external diameter surface of the. Accordingly, use the product in a condition in which the makes one or more turns. Operating temperature C-Lube Cam Follower Model code Size of CL (Size of combined Cam Follower) unit : Allowable operating temperature range of Follower with C-Lube Unit is - to C. Cam Fusion- bonded esin particles are strongly fusion bonded. Mounting Set the C-Lube Unit perpendicularly to the center axis of Cam Follower and fix together with Cam Follower by tightening nut. Fig. 7 Mounting of C-Lube Unit 2 Position of C-Lube Unit is adjustable. C-Lube Unit must be positioned avoiding loading direction. esin part Lubricant is retained in cavities amongst resin particles. Load Lubricant part Fig. Load direction of Cam Follwer When tightening the nut, the tightening torque should not be exceeded the value maximum tightening torque on dimension table. In case loosening of the nut is predicted due to vibration, using lock nut, spring washer and other special washer are recoended. Model number CL CL CL CL CL - CL 2 CL 2- CL CL CL CL Boundary Dimensions W H T t Model number CF B CF B CF B CF B CF - B CF 2 B CF 2- B CF B CF B CF B CF - B Applicable Boundary Dimensions D B max ote( ) Only representative s shown in the table, but also applicable to the same size of Metric series, with thrust disk, centralized lubrication, C-Lube and Cylindrical oller. Combine with C-Lube is strongly recoended for full maintenance free. Precaution for use The maximum allowable load on Cam Follower with C-Lube Unit is, % of the maximum allowable load of the needle bearing. C-Lube Unit may be damaged and influenced to the smooth roatation and lubricating performance by excessive load. 2 After assemling C-Lube Unit and in the machine, please confirm that C-Lube unit provides oil correctly to the track surface before actual operation. Do not use in the environment which contamination of liquid and/or harmful foreign matter are expected Do not wash with organic solvent and/or white kerosene, which have the ability of removing fat nor leave them in contact with the above agents. To ensure normal rotation of the Cam Follower, apply a load of % or over of the dynamic at use. Also, the needs to be rotate over a revolution to supply lubricant on entire outer diameter surface. eplace with new C-Lube Unit when inside oil finishes completely. e-lubrication is not possible. 7 Do not apply a load onto the C-Lube Unit directly. =.2kgf=.2lbs. =.7inch

17 Miniature Type With Hexagon Hole Material Carbon steel Stainless steel Shield ed Stud dia. 2. With cage CFS 2. CFS 2. Mass (ef.) g Boundary dimensions CFS 2 CFS M2. 2 CFS 2 F CFS 2 F CFS 2. F CFS CFS CFS CFS CFS CFS Cylindrical Crowned F F F CFS 2. F CFS CFS CFS CFS CFS CFS F F F 2 7 D C d G G B 2. CFS CFS F M2.. M. M.7 M B B 2 C H CFS CFS F Mounting dimension f Min tightening torque -cm Basic dynamic C Basic static C allowable static load CFS CFS F CFS CFS F 2 7 M emarks. o oil hole is provided. 2. Provided with prepacked grease.. A nut is supplied with the stud. =.2kgf=.2lbs. =.7inch 2

18 Thrust Disk Type Miniature With Hexagon Hole Material Carbon steel Stainless steel Shield ed Stud dia With cage CFS 2 CFS 2 CFS 2. W FW W CFS 2. FW CFS CFS CFS CFS CFS CFS CFS CFS Cylindrical Crowned W FW W FW W FW W FW CFS. W Mass (ef.) emarks. o oil hole is provided. 2. Provided with prepacked grease.. A nut is supplied with the stud. g M.. M2. M2.. M. M.7 M. M CFS. W Boundary dimensions D C d G G B B B 2 C H CFS W CFS FW Mounting dimension f Min tightening torque -cm Basic dynamic C Basic static C allowable static load =.2kgf=.2lbs. =.7inch

19 Standard Type With Cage/With Hexagon Hole Material Carbon steel Stainless steel Shield ed Cylindrical Crowned CF FB Stud dia d to Mass Boundary dimensions Stud (ef.) dia. Shield ed With crowned With cylindrical With crowned With cylindrical g D C d G G B B B 2 B C g g 2 H CF B CF B CF B CF B. 7 M CF FB CF FB CF FB CF FB. 7 M CF B CF B CF B CF B 7. 2 M CF FB CF FB CF FB CF FB 7. 2 M CF B CF B CF B CF B. M CF FB CF FB CF FB CF FB. M CF B CF B CF B CF B. M 2.2max 2.2max. CF FB CF FB. M 2.2max 2.2max. CF B CF B CF B CF B 2. M.2 2.2max 2.2max. CF BM CF BM CF BM CF BM 2. M 2.2max 2.2max. CF FB CF FB 2. M.2 2.2max 2.2max. CF B CF B CF B CF B 22 2 M.2 2.2max.2max 2. CF BM CF BM CF BM CF BM 22 2 M 2.2max.2max 2. CF FB CF - B CF - BM CF - B CF - BM CF FB CF - B CF - BM CF - B CF - BM M.2 M.2 M max.2max.2max.2max.2max.2max CF 2 B CF 2 B CF 2 B CF 2 B 2 M2..2max.2max 2. 2 CF 2 FB CF 2- B CF 2- B CF 2 FB CF 2- B CF 2- B M2. M2..2max.2max.2max.2max CF B CF B CF B CF B 7 M. 7.max 2.max 2.. CF FB CF FB 7 M. 7.max 2.max 2.. CF B CF B CF B CF B M. 2.max.max.. CF FB CF FB M. 2.max.max.. CF B CF B CF B CF B 2 M. 2 2.max.max.. CF FB CF - B CF - B CF FB CF - B CF - B 2 7 M. M max 2.max.max.max.... CF B CF B CF B CF B 2 M. 2.max.max.. 2 CF - B CF - B CF - B CF - B 72 M. 2.max.max.. 2 CF B CF B CF B CF B 7 M. 2 7 max max 7 CF - B CF -2 B CF - B CF -2 B CF - B CF -2 B CF - B CF -2 B M. M max 7 max max max 7 7 ote( ) Minimum allowable value of chamfer dimension r emarks. Models with a stud diameter d of or less have no oil hole. For models with a stud dia. to, oil hole (re-greasing fitting) is provided at the head. Other models are provided with an oil hole (grease nipple) at the head and an oil hole each on the outside surface and end surface of the stud. 2. Shield models with a stud diameter d of or less and the sealed models are provided with prepacked grease. Other models are not provided with prepacked grease. Perform proper lubrication for use.. A nut is supplied with the stud. CF FB Stud dia d 2 to CF FB r s min CF FB Mounting dimension f Min CF FB tightening torque -m Basic dynamic C Basic static C allowable static load =.2kgf=.2lbs. =.7inch

20 Standard Type Full Complement Type/With Hexagon Hole Material Carbon steel Stainless steel Shield ed Stud dia. 2 Shield With crowned With cylindrical CF CF CF B B BM CF B CF BM CF - B CF - BM CF 2 B CF 2- B CF CF Cylindrical Crowned B B CF B CF - B CF B CF - B CF B CF - B CF -2 B CF CF CF B B BM CF B CF BM CF - B CF - BM CF 2 B CF 2- B CF CF B B CF B CF - B CF B CF - B CF B CF - B CF -2 B CF CF CF B B BM CF B CF BM CF - B CF - BM CF 2 B CF 2- B CF CF ed With crowned With cylindrical B B CF B CF - B CF B CF - B CF B CF - B CF -2 B CF CF CF B B BM CF B CF BM CF - B CF - BM CF 2 B CF 2- B CF CF B B CF B CF - B CF B CF - B Stud dia d CF B CF - B CF -2 B CF B to Mass (ef.) g D C d G M M.2 M M.2 M M.2 M M2. M2. M. M. M. M. M. M. M. M. M. Stud dia d Boundary dimensions G CF B 2 to B max B max CF B B 2 B C g g 2 H CF B r s min Mounting dimension f Min CF B tightening torque -m Basic dynamic C Basic static C allowable static load ote( ) Minimum allowable value of chamfer dimension r emarks. Models with a stud diameter d of or less have an oil hole (re-greasing fitting) at the head. Other models are provided with an oil hole (grease nipple) at the head and an oil hole each on the outside surface and end surface of the stud. 2. Provided with prepacked grease.. A nut is supplied with the stud. 7 =.2kgf=.2lbs. =.7inch

21 Stud dia. 2 Thrust Disk Type Material Carbon steel Stainless steel Shield ed Cylindrical Crowned Shield CF WB CF FWB CF WB CF FWB CF WB CF FWB CF WB CF FWB CF WB CF FWB CF WB CF FWB M. M. M.7 M.7 M. M. CF WB CF WB. M CF WB CF WB 2. M.2 CF WB CF - WB CF 2 WB CF 2- WB CF WB CF - WB CF 2 WB CF 2- WB M.2 M.2 M2. M2. CF WB CF WB 7 M. 7 CF WB CF WB M. CF WB CF - WB ed CF WB CF - WB With Cage/With Hexagon Hole Mass (ef.) g D 2 7 CF FWB Stud dia d to Boundary dimensions C d G G M. M. emarks. Models with a stud diameter d of or less have no oil hole. For Models with a stud dia. to, oil hole (re-greasing fitting) is provided at the head. Other models are provided with an oil hole (grease nipple) at the head and an oil hole each on the outside surface and end surface of the stud. 2. Shield models with a stud diameter d of or less and the sealed models are provided with prepacked grease. Other models are not provided with prepacked grease. Perform proper lubrication for use.. A nut is supplied with the stud B B B 2 B C g g 2 H Mounting dimension f Min tightening torque -m Basic dynamic C Basic static C allowable static load 2.2max 2.2max max 2.2max.. 7.2max.2max.2max.2max.2max.2max.2max.2max max 2.max max.max max 2.max.max.max Stud dia d CF WB.. 2 to.. CF FWB =.2kgf=.2lbs. =.7inch

22 2 C-Lube Material Stud dia. CF CF CF WB/SG WB/SG WB/SG CF WB/SG CF - WB/SG CF 2 WB/SG CF 2- WB/SG CF CF Carbon steel Stainless steel Shield ed Cylindrical Crowned WB/SG WB/SG CF WB/SG CF - WB/SG Mass (ef.) g With Cage/With Hexagon Hole D C d D H = G M C B M. d C B 2 B 7. G G 2.2 max max M max 2.2 max M.2 M.2 M2. M max.2 max.2 max.2 max.2 max.2 max.2 max.2 max M. 7. max 2. max M. 2. max. max 2 7 M. M. emarks. Please do not Wash with organic solvent and/or white kerosene which have the ability to remove fat. 2. To ensure normal rotation of the bearing, apply a load of % or more of the basic dynamic at use.. The operating temperature range is - + C. Continuous operating temperature is + C or less.. egreasing is not possible as the bearing internal space is filled with thermosetting solid- lubricant C-Lube.. A nut is supplied with the stud. G 2 2 Boundary dimensions B B 2. max 2. max. max. max B 2 C H.. Mounting dimension f Min.. tightening torque -m. 2.7 Basic dynamic C 2 Basic static C 2 allowable static load =.2kgf=.2lbs. =.7inch 2

23 Stud dia. 2 Solid Eccentric Stud Type Material Shield With crowned With cylindrical CFES CFES B B CFES B CFES - B CFES 2 B CFES 2- B CFES CFES Carbon steel Stainless steel Shield ed Cylindrical Crowned B B CFES CFES B B CFES B CFES - B CFES 2 B CFES 2- B CFES CFES B B ed With crowned With cylindrical CFES CFES B B CFES B CFES - B CFES 2 B CFES 2- B CFES CFES B B CFES CFES B B CFES B CFES - B CFES 2 B CFES 2- B CFES CFES ote( ) Minimum allowable value of chamfer dimension r emarks. Models with a stud diameter d of or less have an oil hole (re-greasing fitting) at the head. Other models are provided with an oil hole (grease nipple) at the head and an oil hole each on the outside surface and end surface of the stud. 2. Shield models with a stud diameter d of or less and the sealed models are provided with prepacked grease. Other models are not provided with prepacked grease. Perform proper lubrication for use.. A nut is supplied with the stud. B B With Cage/With Hexagon Hole Mass (ef.) g. 2. Stud dia d to Stud dia d 2 to 7 D C d G M M.2 M.2 M.2 M2. M2. M. M. Boundary dimensions G B max B max B 2 B C g g 2 H r s min Eccentricity ε Mounting dimension f Min tightening torque -m Basic dynamic C Basic static C allowable static load =.2kgf=.2lbs. =.7inch

24 Outside diameter of eccentric collar Eccentric Type Material Shield With crowned With cylindrical CFE CFE B B CFE B CFE - B CFE 2 B CFE 2- B CFE CFE Carbon steel Stainless steel Shield ed Cylindrical Crowned B B CFE B CFE - B CFE B CFE - B CFE B CFE - B CFE -2 B CFE CFE B B CFE B CFE - B CFE 2 B CFE 2- B CFE CFE B B CFE B CFE - B CFE B CFE - B CFE B CFE - B CFE -2 B ed With crowned With cylindrical CFE CFE B B CFE B CFE - B CFE 2 B CFE 2- B CFE CFE With Cage/With Hexagon Hole B B CFE B CFE - B CFE B CFE - B CFE B CFE - B CFE -2 B Outside diameter of eccentric collar d e CFE CFE B B CFE B CFE - B CFE 2 B CFE 2- B CFE CFE B B CFE B CFE - B CFE B CFE - B CFE B CFE - B CFE -2 B to Mass (ef.) g D C d e ote( ) Minimum allowable value of chamfer dimension r emarks. Models with a thread diameter G of or less have an oil hole (re-greasing fitting) at the head. Other models are provided with an oil hole (grease nipple) at the head and an oil hole on the end surface of the stud. 2. Shield models with a stud thread diameter G of or less and the sealed models are provided with prepacked grease. Other models are not provided with prepacked grease. Perform proper lubrication for use.. A nut is supplied with the stud Outside diameter of eccentric collar d e to Boundary dimensions G M M.2 M.2 M.2 M2. M2. M. M. M. M. M. M. M. M. M. B B B B 2 C g G H max max r s min Eccentricity ε Mounting dimension f Min tightening torque -m Basic dynamic C Basic static C allowable static load =.2kgf=.2lbs. =.7inch

25 Outside diameter of eccentric collar Eccentric Type Material Shield With crowned With cylindrical CFE CFE B B CFE B CFE - B CFE 2 B CFE 2- B CFE CFE Carbon steel Stainless steel Shield ed Cylindrical Crowned B B CFE B CFE - B CFE B CFE - B CFE B CFE - B CFE -2 B CFE CFE B B CFE B CFE - B CFE 2 B CFE 2- B CFE CFE B B CFE B CFE - B CFE B CFE - B CFE B CFE - B CFE -2 B ed With crowned With cylindrical CFE CFE B B CFE B CFE - B CFE 2 B CFE 2- B CFE CFE Full Complement Type/With Hexagon Hole B B CFE B CFE - B CFE B CFE - B CFE B CFE - B CFE -2 B CFE CFE B B CFE B CFE - B CFE 2 B CFE 2- B CFE CFE B B CFE B CFE - B CFE B CFE - B CFE B CFE - B CFE -2 B ote( ) Minimum allowable value of chamfer dimension r emarks. Models with a thread diameter G of or less have an oil hole (re-greasing fitting) at the head. Other models are provided with an oil hole (grease nipple) at the head and an oil hole on the end surface of the stud. 2. Provided with prepacked grease.. A nut is supplied with the stud. Mass (ef.) g Outside diameter of eccentric collar d e to Outside diameter of eccentric collar d e to D C d e G M M.2 M.2 M.2 M2. M2. M. M. M. M. M. M. M. M. M. Boundary dimensions B B B B 2 C g G H max max r s min Eccentricity ε Mounting dimension f Min tightening torque -m Basic dynamic C Basic static C allowable static load =.2kgf=.2lbs. =.7inch

26 Centralized Lubrication Type With Cage/With Screwdriver Slot Material Stud dia. 2 Carbon steel Stainless steel Shield Cylindrical Crowned With crowned CF-U- CF-U- CF-U- CF-U-- CF-U-2 CF-U-2- CF-U- CF-U- CF-U- CF-U-- CF-U- CF-U-- CF-U- CF-U-- CF-U--2 With cylindrical CF-FU- CF-FU- CF-FU- CF-FU-- CF-FU-2 CF-FU-2- CF-FU- CF-FU- CF-FU- CF-FU-- CF-FU- CF-FU-- CF-FU- CF-FU-- CF-FU--2 ote( ) Minimum allowable value of chamfer dimension r emarks. Models with a stud diameter d of 2 or less are provided with a lubrication tapped hole on the stud head only. Other models are provided with one lubrication tapped hole each on the head and end surface of the stud. 2. Provided with prepacked grease.. A nut is supplied with the stud. Mass (ef.) g CF-U D C d G Boundary dimensions M M.2 M.2 M.2 M2. M2. M. M. M. M. M. M. M. M. M. G B max B max CF-FU B 2 B C g 2 M M 2 r s min M.7 PT PT Mounting dimension f Min tightening torque -m Basic dynamic C Basic static C allowable static load =.2kgf=.2lbs. =.7inch

27 Easy Mounting Type Material Carbon steel Stainless steel Shield Cylindrical With Cage/With Hexagon Hole Stud dia. 2 CF-SFU- CF-SFU- B B CF-SFU- B CF-SFU- - B CF-SFU- 2 B CF-SFU- 2- B CF-SFU- CF-SFU- B B CF-SFU- B CF-SFU- - B Mass (ef.) g. 2 D C d ote( ) Minimum allowable value of chamfer dimension r emarks. Models with a stud diameter d of or less have an oil hole (re-greasing fitting) at the head. Other models are provided with an oil hole (grease nipple) at the head. 2. Provided with prepacked grease B max B max Boundary dimensions B Stud dia d Stud dia d 2 C L L 2 H.... e r s min D Tolerance Mounting dimensions t Min f Min h (ef.) Basic dynamic C Basic static C allowable static load =.2kgf=.2lbs. =.7inch 2

28 Cylindrical oller Full Complement Type/With Hexagon Hole Material Carbon steel Stainless steel ed Stud dia. 2 Cylindrical Crowned UCF B UCF - B UCF 2 B UCF 2- B UCF UCF B B UCF B UCF - B UCF B UCF - B UCF B UCF -2 B Mass (ef.) g D C d G M.2 M.2 M2. M2. M. M. M. M. M. M. M. M. emarks. Model with a stud diameter d of is provided with an oil hole (re-greasing fitting) on the stud head only. Other models are provided with one oil hole each on the head, outside surface and end surface of the stud. 2. Provided with prepacked grease.. A nut is supplied with the stud. Boundary dimensions G B B max max Stud dia d Stud dia d 2 to B 2 B C g g 2 H Mounting dimension f Min tightening torque -m Basic dynamic C 2 2 Basic static C allowable static load 27 7 =.2kgf=.2lbs. =.7inch

29 Inch Series With Cage/With Hexagon Hole Material Stud dia. (inch) C B C B C B C B.2 C - B C - B C - B C - B. C B C B C B C B!/ C - B C - B C - B C - B.2 #/.2 &/ 2.7!/2.7 %/. #/ &/ C 2 C C C C C 22 C C 2 C 2 C C 2 C Carbon steel Stainless steel Shield ed Cylindrical Crowned Shield With crowned With cylindrical B C 2 B C B C B C B C B C 22 B C B C 2 B C 2 B C B C 2 B C ed With crowned With cylindrical B C 2 B C B C B C B C B C 22 B C B C 2 B C 2 B C B C 2 B C B C 2 B C B C B C B C B C 22 B C B C 2 B C 2 B C B C 2 B C B B B B B B B B B B B B Mass (ef.) g D C d 2.7!/ 2.7!!/2 2.7!/ 2.2 #/.7 %/.!#/2.7 %/.2 &/. #/ 2.7!/ &/ 2.7!/ !/.!/.2 #/.2 #/ 2..7 %/.2 &/ 2.7!/.7 %/.2 &/.7!/. #/ 2.7!/ 2.2 #/. #/ 2.7!/ 2.!/ &/.7 %/.27 %/ &/.7 %/. #/ &/ 2. CB. #/. #/..7!/ &/ 7.!/.7!/ &/ o.-2 o.-2!/ -2!/ -2 #/ - #/ - &/ - &/ -!/ 2 -!/ 2 - %/ - %/ - #/ - #/ - &/ - &/ -.!/.!/ 7. %/ 7. %/.2 #/.2 #/ 2.7!/ 2 2.7!/ 2.7 %/.7 %/. #/. #/ &/ &/ emarks. Models with a stud diameter d of. or less have no oil hole. Other models are provided with one oil hole each on the outside surface and end surface of the stud. 2. Provided with prepacked grease.. Eccentric Type Inch Series, CE are also available. If required, please consult to.. A nut is supplied with the stud. G UF G B max !/ 2.7 %/.7 %/. #/ &/ &/ !/.7!/.!/ 2.!/ 2. #/. #/.. CB Boundary dimensions (inch).7!/2.7!/2.7!/2.7!/2.!/.!/.!/.!/ 7. %/ 7. %/.2 #/.2 #/.2 &/.2 &/ 2.7!/ 2 2.7!/ 2.7!/2.7!/2 CB.72 #/ 2. #/2.72 #/ 2. #/2.7!/2.72 #/. %/2.7!/2.72 #/. %/2.7!/2.72 #/. %/2.7!/2.72 #/. %/2 CB B 2 B C g g 2 H r.7!/.7!/.7!/.7!/.7!/2.72 #/.7!/.!/.7!/2.72 #/.7!/.!/.7!/2.72 #/.7!/.!/.7!/2.72 #/.7!/.!/.7!/.7!/ Mounting dimension f #/.7!/2.!&/2.72 #/.7!/2.!(/2. #/ 7. $%/.!/. #/.!/ 2.2 %%/.!/ 2.2 %%/ 7. %/.!/ 2. #/ 7. %/.!/ 2. #/ 7. %/.!/ 2. (/2 7. %/.!/ 2. (/2.7!/2.72 #/.72 #/.2 &/.!/ 7.!%/2.7!/2.72 #/.72 #/.2 &/.!/ 7.!%/2 tightening torque -m Basic dynamic C Basic static C =.2kgf=.2lbs. =.7inch

30 Inch Series With Cage/With Screwdriver slot Material Carbon steel Stainless steel Shield ed Stud dia. (inch).2.!/.2 #/.2 &/ 2.7!/2.7 %/. #/ &/ C C - C C - C 2 C C C C C 22 C C 2 C 2 C C 2 C Cylindrical Crowned Shield With crowned With cylindrical C C - C C - C 2 C C C C C 22 C C 2 C 2 C C 2 C ed With crowned With cylindrical C C - C C - C 2 C C C C C 22 C C 2 C 2 C C 2 C C C - C C - C 2 C C C C C 22 C C 2 C 2 C C 2 C Mass (ef.) g D C d 2.7!/ 2.7!!/2 2.7!/ 2.2 #/.7 %/.!#/2.7 %/.2 &/. #/ 2.7!/ &/ 2.7!/ !/.!/.2 #/.2 #/ 2..7 %/.2 &/ 2.7!/.7 %/.2 &/.7!/. #/ 2.7!/ 2.2 #/. #/ 2.7!/ 2.!/ &/.7 %/.27 %/ &/.7 %/. #/ &/ 2. C. #/. #/..7!/ &/ 7.!/.7!/ &/ G UF o.-2 o.-2!/ -2!/ -2 #/ - #/ - &/ - &/ -!/ 2 -!/ 2 - %/ - %/ - #/ - #/ - &/ - &/ -.!/.!/ 7. %/ 7. %/.2 #/.2 #/ 2.7!/ 2 2.7!/ 2.7 %/.7 %/. #/. #/ &/ &/ emarks. Models with a stud diameter d of. or less (marked *) are provided with an oil hole on the stud head only. Other models are provided with one oil hole each on the head, outside surface and end surface of the stud. 2. Provided with prepacked grease.. Eccentric Type Inch Series, CE are also available. If required, please consult to.. A nut is supplied with the stud. G B max ) !/ 2.7 %/.7 %/. #/ &/ &/ !/.7!/.!/ 2.!/ 2. #/. #/.. C Boundary dimensions (inch).!/.!/.!/.!/ 7. %/ 7. %/.2 #/.2 #/.2 &/.2 &/ 2.7!/ 2 2.7!/ 2 C.7!/2 *.7!/.7!/2 *.7!/.7!/2 *.7!/.7!/2 *.7!/.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/.7!/.7!/.7!/.72 #/ 2. #/2.7!/2.72 #/ 2. #/2.7!/2.72 #/.7!/.72 #/.7!/.72 #/.7!/.72 #/.7!/ C B 2 B C g g 2 r. #/.!/.!/.!/.72 #/. %/2.!/.72 #/. %/2.!/.72 #/. %/2.!/.72 #/. %/2.!/.72 #/.72 #/.!/.72 #/.72 #/.!/ Mounting dimension f 7. $%/. #/ 2.2 %%/ 2.2 %%/ 2. #/ 2. #/ 2. (/2 2. (/2 7.!%/2 7.!%/2 tightening torque -m Basic dynamic C Basic static C =.2kgf=.2lbs. =.7inch

31 Inch Series Full Complement Type/With Hexagon Hole Material Stud dia. (inch) C B C B C B C B.2 C - B C -B C - B C - B.!/.2 #/.2 C &/ C 2.7!/2.7 %/. #/ &/ Shield With crowned With cylindrical C B C B C B C B C - B C -B C - B C - B C 2 C C C 22 C C 2 C 2 C C 2 C Carbon steel Stainless steel Shield ed Cylindrical Crowned B C 2 B C B C B C B C B C 22 B C B C 2 B C 2 B C B C 2 B C B C 2 B C B C B C B C B C 22 B C B C 2 B C 2 B C B C 2 B C ed With crowned With cylindrical B C 2 B C B C B C B C B C 22 B C B C 2 B C 2 B C B C 2 B C B B B B B B B B B B B B Mass (ef.) g 2.7!/ 2.7!!/ !/ 2.2 #/.2.7 %/.!#/2 2.7 %/.2 &/.!/.!/. #/ 2.7!/ 2.2 #/ &/ 2.7!/ 2.2 #/ D C d 2..7 %/.2 &/ 2.7!/.7 %/.2 &/.7!/. #/ 2.7!/ 2.2 #/. #/ 2.7!/ 2.!/ &/.7 %/.27 %/ &/.7 %/. #/ &/ 2.. #/. #/..7!/ &/ 7.!/.7!/ &/ G UF o.-2 o.-2!/ -2!/ -2 #/ - #/ - &/ - &/ -!/ 2 -!/ 2 - %/ - %/ - #/ - #/ - &/ - &/ - G.!/.!/ 7. %/ 7. %/.2 #/.2 #/ 2.7!/ 2 2.7!/ 2.7 %/.7 %/. #/. #/ &/ &/ emarks. Models with a stud diameter d of. or less have no oil hole. Other models are provided with one oil hole each on the outside surface and end surface of the stud. 2. Provided with prepacked grease.. Eccentric Type Inch Series, CE are also available. If required, please consult to.. A nut is supplied with the stud. CB CB CB CB B max ) Boundary dimensions (inch) B 2 B C g g 2 H r 2.7!/ 2.7 %/.7 %/. #/ &/ &/ !/.7!/.!/ 2.!/ 2. #/. #/...!/.!/.!/.!/ 7. %/ 7. % /.2 #/.2 #/.2 & /.2 &/ 2.7!/ 2 2.7!/ 2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.72 #/ 2. #/ 2.72 #/ 2. #/ 2.72 #/.72 #/.72 #/.72 #/.7!/.7!/.7!/.7!/.72 #/. %/ 2.72 #/. %/ 2.72 #/. % /2.72 #/. % /2.7!/.7! /.7!/.7!/ Mounting dimension f /.7!/.7! /.72 # /.7!/ 2.!& /2.72 #/.7!/ 2.!(/ 2.!/. # / 7. $% /.!/.!/. #/.!/.!/ 2.2 %%/.!/.!/ 2.2 %%/ 7. %/.! / 2. #/ 7. %/.!/ 2. # / 7. %/.!/ 2. ( /2 7. %/.!/ 2. (/ 2.72 #/.72 #/.2 &/.! / 7.!%/2.72 #/.72 #/.2 &/.!/ 7.!%/2 tightening torque -m Basic dynamic C Basic static C =.2kgf=.2lbs. =.7inch

32 Inch Series Full Complement Type/With Screwdriver Slot Material Carbon steel Stainless steel Shield ed Stud dia. (inch) C.2 C -.!/.2 #/.2 &/ 2.7!/2.7 %/. #/ &/.7!/ C C - C 2 C C C C C 22 C C 2 C 2 C C 2 C Cylindrical Crowned Shield With crowned With cylindrical C C C - C - C C C - C - C 2 C C C C C 22 C C 2 C 2 C C 2 C ed With crowned With cylindrical C 2 C C C C C 22 C C 2 C 2 C C 2 C C C - C C - C 2 C C C C C 22 C C 2 C 2 C C 2 C Mass (ef.) g.7 %/.!#/2.!/ 2.7 %/.2 &/.!/. #/ 2.7!/ 2.2 #/ &/ 2.7!/ 2.2 #/ D C d 2.7!/ 2.7!!/ !/ 2.2 #/ %/.2 &/ 2.7!/.7 %/.2 &/.7!/. #/ 2.7!/ 2.2 #/. #/ 2.7!/ 2.!/ &/.7 %/.27 %/ &/.7 %/. #/ &/ 2. C. #/. #/..7!/ &/ 7.!/.7!/ &/ G UF o.-2 o.-2!/ -2!/ -2 #/ - #/ - &/ - & / -!/ 2 -!/ 2 - %/ - %/ - #/ - #/ - &/ - &/ - C 7.. #/.7!/!/ -2 G.!/.!/ 7. %/ 7. %/.2.2 #/ #/ 2.7!/ 2 2.7!/ 2.7 %/.7 %/. #/. #/ &/ &/ !/ B max ) !/ 2.7 %/.7 %/. #/ &/ &/ !/.7!/.!/ 2.!/ 2. #/. #/...!/ 2 C C C Boundary dimensions (inch) B 2 B C g g 2 r.!/.!/.!/.!/ 7. %/ 7. %/.2 #/.2 #/.2 &/.2 &/ 2.7!/ 2 2.7!/ 2.7 %/.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.7!/2.!/ *.7!/ *.7!/ *.7!/ *.7!/.7! /.7!/.7!/.7!/.72 #/ 2. # /2.7!/ 2.72 #/ 2. # /2.7!/ 2.72 #/.72 #/.72 #/.72 #/.7!/.7!/.7!/.7!/. # /.! /.!/.!/.72 #/. %/ 2.!/.72 #/. %/ 2.!/.72 #/. %/ 2.!/.72 #/. %/ 2.!/.72 #/.72 # /.!/.72 #/.72 # /.! /.!/.72 # / 2. # /2 Mounting dimension f Min. 2.!(/ 2 7. $%/. #/ 2.2 %% / 2.2 %%/ 2. #/ 2. #/ 2. (/ 2 2. (/ 2 7.!%/2 7.!%/2. #/ tightening torque -m Basic dynamic C Basic static C emarks. Models with a stud diameter d of. or less (marked *) are provided with an oil hole on the stud head only. Other models are provided with one oil hole each on the head, outside surface and end surface of the stud. 2. Provided with prepacked grease.. Eccentric Type Inch Series, CE are also available. If required, please consult to. =.2kgf=.2lbs. =.7inch 2

33 Inch Series Heavy Duty Full Complement Type/With Hexagon Hole Material Carbon steel Stainless steel Shield ed Stud dia. (inch). CH - B!/ CH B 7. CH - B %/ CH B.2 &/.7 %/. #/ &/ 2. CH 2 CH CH CH CH CH 22 CH CH 2 CH 2 CH 2.7 CH 2!/ CH.7 CH!/ CH Cylindrical Crowned Shield With crowned With cylindrical CH - B CH - B CH - B CH B CH B CH B CH - B CH - B CH - B CH B CH B CH B B CH 2 B CH B CH B CH B CH B CH 22 B CH B CH 2 B CH 2 B CH B CH 2 B CH B CH B CH ed With crowned With cylindrical B CH 2 B CH B CH B CH B CH B CH 22 B CH B CH 2 B CH 2 B CH B CH 2 B CH B CH B CH B CH 2 B CH B CH B CH B CH B CH 22 B CH B CH 2 B CH 2 B CH B CH 2 B CH B CH B CH B B B B B B B B B B B B B B Mass (ef.) D C d 2.7!/ 2.2 (/.2 #/.2 #/.7 %/.2 &/ 7.2!!/.2 &/.!/.!/ 2..7 %/.7 %/ 2.7!/.7 %/.7 %/.7!/. #/. #/.2 #/. #/. #/.!/ &/ &/.27 %/ &/ &/. #/ &/ %/ 7. %/. #/ 2.7!/ 2.2 &/ &/ 2.7!/ 2.2 &/ g !/ 2.7!/ 7.!/.7!/ 2.7!/.!/ 2.!/ 2.7!/. #/.!/ 2.7!/ CHB G UF!/ -2!/ -2 %/ - % / - &/ - &/ - %/ - %/ - #/ - #/ - &/ - &/ - - US - US!/ -2!/ -2!/ -2!/ -2 G..!/!/ 7. %/ 7. %/.2 #/.2 #/ 2.7!/ 2 2.7!/ 2.7 %/.7 %/. #/. #/ &/ &/ !/ 2.7!/ B max...7 %/...7 %/ 2... #/ 2... #/ &/ &/ ) !/.7!/.!/ 2.!/ 2. #/. #/ CHB Boundary dimensions (inch) 7.!/ 7.!/.7!/2.7!/2.7!/2.7!/2.!/.!/.!/.!/.7!/2.72 #/.7!/2.72 #/.!/.72 #/.!/.72 #/ 7. %/.!/.72 #/ 7. %/.!/.72 #/.2 #/.2 #/.!/.72 #/.!/.72 #/.2 &/.!/.72 #/.2 &/.!/.72 #/ 2.7!/ 2 2.7!/ 2 CHB.!/.72 #/.!/.72 #/.2 (/.!/.72 #/.2 (/.!/.72 #/ 2. #/ 2 2. #/ 2 2. #/ 2 2. #/ 2 2. # /2 2. #/ 2 2. #/ 2 2. #/ 2 2. #/ 2 2. #/ 2.7!/.7!/.7!/.7!/.72 #/.72 #/.!/.! /.!/.!/ 7. %/ 7. %/ 7. %/ 7. %/.7!/.2 & /.7!/.2 &/.7!/.7!/ 2.7!/ 2 2.7!/ 2 CHB B 2 B C g g 2 H r 7 7.7!/.7!/ Mounting dimension f &/.7!/.2 &/.7!/ 2.!&/2.7!/ ^!/.!/. ^!/.!/ 2.!/.!/ 2.!/.!/ 2.!(/.!/ 2.!(/.!/ 7.!%/2.! / 7.!%/2 2. #/ 2.7 #(/ 2. # /2.7 #(/ tightening torque -m Basic dynamic C Basic static C CH!/2 CH 2 B B CH CH 2 B B CH CH 2 B B CH CH 2 B B #/.!/ 2 2.!/. #/.!/ 2!/ 2-2!/ 2-2.7!/.7!/.....!/ 2.!/ 2.7 %/.7 %/.!/.!/.!/.!/.7!/.7!/. #/. #/ #/ 2 2. # /2. #/. #/ CH #/ B CH B CH B CH B.!/ 2.. #/ #/ - 2U.2 #/ #/ 7.2!!/.!/.!/.7!/. #/ 7 2. # 2. CH B CH B CH B CH B. 7.!/. - 2U.!/ 2.2..!/ 2. #/.!/.!/.7!/. #/ 7 2. # /2. #%/ emarks. Models with a stud diameter d of 7. or less have no oil hole. Other models are provided with one oil hole each on the outside surface and end surface of the stud. 2. Provided with prepacked grease.. A nut is supplied with the stud. =.2kgf=.2lbs. =.7inch

34 Inch Series Heavy Duty Full Complement Type/With Hexagon Hole Material Carbon steel Stainless steel Shield ed Stud dia. (inch).!/ 7. CH - %/ CH.2 &/.7 %/. #/ &/ 2. With crowned CH - CH CH 2 CH CH CH CH CH 22 CH CH 2 CH 2 CH 2.7 CH 2!/ CH.7 CH!/ CH Shield Cylindrical Crowned With cylindrical CH - CH CH - CH CH 2 CH CH CH CH CH 22 CH CH 2 CH 2 CH CH 2 CH CH CH With crowned CH - CH CH - CH CH 2 CH CH CH CH CH 22 CH CH 2 CH 2 CH CH 2 CH CH CH ed With cylindrical CH - CH CH - CH CH 2 CH CH CH CH CH 22 CH CH 2 CH 2 CH CH 2 CH CH CH Mass (ef.) g D C d 2.7!/ 2.2 (/.2 #/.2 #/.7 %/.2 &/ 7.2!!/.2 &/.! /.! / 2..7 %/.7 %/ 2.7!/.7 %/.7 %/.7!/. #/. #/.2 #/. #/. #/.!/ &/ &/.27 %/ &/ &/. #/ &/ %/ 7. %/. #/ 2.7!/ 2.2 &/ &/ 2.7!/ 2.2 &/ CH G UF!/ -2!/ -2 %/ - %/ - &/ - &/ - %/ - %/ - #/ - #/ - &/ - &/ - - US - US..7!/ 2.7!/!/ -2 7.!/.7!/ 2.7!/!/ -2.!/ 2.!/ 2.7!/!/ -2. #/.!/ 2.7!/!/ -2 G..!/!/ 7. %/ 7. %/.2 #/.2 #/ 2.7!/ 2 2.7!/ 2.7 %/.7 %/. #/. #/ &/ &/ !/ 2.7!/ B max...7 %/...7 %/ 2... #/ 2... #/ &/ &/ CH Boundary dimensions (inch) !/.7!/.!/ 2.!/ 2. #/. #/.. 7.!/ 7.!/.!/.!/.!/.!/.7!/2 *.7!/.7!/2 *.7!/.7!/2 *.7!/.7!/2 *.7!/.7!/2.7!/2.!/.!/ 7. %/.!/ 7. %/.!/.2 #/.2 #/.!/.!/.2 &/.!/.2 &/.!/ 2.7!/ 2 2.7!/ 2.!/.!/.2 (/.!/.2 (/.!/ CH.72 #/ 2. #/ 2.72 # / 2. #/ 2.72 #/ 2. #/ 2.72 #/ 2. #/ 2.72 #/ 2. #/ 2.72 # / 2. #/ 2.72 #/ 2. #/ 2.72 #/ 2. #/ 2.72 #/ 2. #/ 2.72 # / 2. #/ 2.72 #/.72 #/.72 #/.72 #/.7!/.7!/.7!/.7!/ 7 7 CH B 2 B C g g 2 r.7! /.7! /.7! /.7! /.7! /2.7! /2. #/.!/.!/.!/.!/.!/.!/.!/.!/.!/ 2. #/ 2 2. #/ 2 Mounting dimension f ^!/. ^!/ 2.!/ 2.!/ 2.!(/ 2.!(/ 7.!%/2 7.!%/2.7 #(/.7 #(/ tightening torque -m Basic dynamic C Basic static C CH!/2 CH 2 CH CH 2 CH CH 2 CH CH #/.!/ 2 2.!/. #/.!/ 2!/ 2-2!/ 2-2.7!/.7!/.....!/ 2.!/ 2.7 %/.7 %/.!/.!/.!/.!/.7!/.7!/ #/ 2 2. #/ 2. #/. #/ #/ CH CH CH CH.!/ 2.. #/ #/ - 2 U.2 #/ #/ 7.2!!/.!/.!/.7!/ 7 2. #/ 2. CH CH CH CH. 7.!/. - 2 U.!/ 2.2..!/ 2. #/.!/.!/.7!/ 7 2. #/ 2. #%/ emarks. Models with a stud diameter d of 7. or less (marked *) are provided with an oil hole on the stud head only. Other models are provided with one oil hole each on the head, outside surface and end surface of the stud. 2. Provided with prepacked grease.. A nut is supplied with the stud. =.2kgf=.2lbs. =.7inch

35 eady-made Track for The accuracy of the track, which an of Cam Followers contacts, greatly influences to the running performance of and equipments. eady-made Track for is a high precision track, which was designed to achieve the original performance of Cam Followers. It can be easily installed with fixing bolts. Depending on mounting direction, two forms of A and the B can be selectable. 2 Dimensions A Track Identification umber An example of identification number is shown below. Model code TLA TLB Overall length Width A Track TLA B Track ominal dimensions Material SKS or equivalent Surface hardness HC or more Ln W H d d 2 h TLA TLA TLA TLA TLA TLA TLA---22 TLA---22 TLA---22 () () () 22 2 emark : When a special track with different dimensions, please consult with. B Track Material SKS or equivalent Surface hardness HC or more Height ominal dimensions Ln W H d d 2 h TLB TLB- -- () TLB TLB- -- () TLB---22 TLB--- () emark : When a special track with different dimensions, please consult with. 7

36 Application Example Application examples of special track for are shown as below. When a special track with different dimensions. please consult with. CF Track nd Metrics etric.com mdmetric.com CF Track

37 nd Metrics etric.com mdmetric.com oller Follower Series Description Dimension Tables Advantage of oller Followers Identification umber Load ating and Life Allowable Static Load Accuracy Clearance Fit Track Capacity Allowable otational Speed Lubrication Oil Hole Mounting Separable oller Followers on-separable oller Followers Cylindrical oller Followers on-separable oller Followers, Inch Series 7 7 oller Followers 7

38 oller Followers ohs compliant oller Followers are bearings designed for rotation, in which needle rollers are incorporated in a thick walled. oller Followers include separable and non-separable s. These bearings are available in a variety of s to suit almost any kind of application. They are widely used for cam mechanisms and for linear motions of conveying equipment. Side plate Inner ring Outer ring eedle roller oller Followers Cage Separable oller Followers AST Combining an, inner ring and eedle oller Cage, which can be separated from one another, assembles these bearings. Thus, handling is easy. Oil lubrication is also easy, making them suitable for high-speed rotations. There are two s: without inner ring AST and with inner ring AST. Outer ring Cage Inner ring Side plate eedle roller ZZ ZZ Open Shield ed Cylindrical Crowned To page Cylindrical oller Followers UT These full complement bearings incorporate cylindrical rollers in the in two rows and can withstand large radial loads and some axial loads. Outer ring Inner ring 7 Shield ed Cylindrical Crowned on-separable oller Followers AT These non-separable bearings have side plates fixed on both sides of the inner ring, and include the caged and the full complement. Outer ring Side plate Inner ring eedle roller Shield ed Cylindrical Crowned To page on-separable oller Followers, Inch Series CY CY is Inch Series of AT series, which has large load capacity, coated with black oxide film treatment. Outer ring Side plate Inner ring Shield ed Cylindrical Crowned oller Followers oller Follower Series with reliability and actual operation results Side plate Shield plate Cylindrical oller To page 7 72 eedle roller To page 7

39 Identification umber Load ating and Life Some examples of the identification number of oller Followers are shown below. For applicable roller guide method, seal and shape of out side surface, refer dimension table of each series. Examples of identification number Example AST ZZ Basic dynamic C The basic dynamic is defined as the constant radial load that % of a group of identical oller Followers can be operated,, revolutions individually under the same conditions free from any material damage caused by rolling fatigue. Load factor It is not unusual for the actual oller Followers loads to exceed the calculated loads, due to vibration and shocks produced when operating the machine. The actual bearing load is obtained by multiplying the calculated load by the load factor shown in Table 2. Model code Metric series Inch series Example 2 Example Example AST Without inner ring Separable oller Follower AST With inner ring AT on-separable oller Follower UT Cylindrical oller Follower CY on-separable oller Follower Size The size indicates the bore diameter of the inner ring. (unit: ) In the inch series, the outside diameter is indicated in units of / inch. method With cage (Separable oller Follower) Open ZZ Shield ZZ ed AT UT CY (Other oller Follower) Shield ed outside surface With crowned With cylindrical 2 Basic static C The basic static is the static radial load constant in direction and magnitude that gives the contact stress shown at the center of the contact area of the rolling element and the raceway receiving the maximum load. Bearing life Basic rating life is calculated as following fomula. C L P r / where, L Basic rating life, rev. C Basic dynamic, P r Dynamic equivalent radial load, Accordingly, when the rotational speed per minute is given, the basic rating life is represented as the total service hours according to the following equations: L h L 2 n where, L h Basic rating life represented by service hours, h n otation speed, min - Static Safety factor The static safety factor f s is defined as in the following equation and its general values are shown in Table. C f s P r where, C Basic static, P Static equivalent load, Table Static safety factor Operating conditions of the bearing When high rotational accuracy is required For ordinary operation conditions For ordinary operation conditions not requiring very smooth rotation When there is almost no rotation f s. Table 2 Load Factor Operating conditions Smooth operation without shocks Ordinary operation Operation subjected to vibration and shocks Allowable Static Load The load that is applicable to oller Followers is, in some cases, determined by the strength of the rather than by the of the needle roller bearing. Therefore, the maximum allowable load that is limited by the strength of is specified. f w oller Followers 7 =.2kgf=.2lbs. =.7inch 7

40 Accuracy Dimensional accuracy and rotational accuracy of oller Followers are based on Tables,.,.2 and. Tolerances for the smallest single roller set bore diameter of Separable oller Followers are shown in Table. oller Followers with special accuracy can also be manufactured. Please contact. Table Tolerances Dimensions and symbols Bore dia. of inner ring d Outside dia. of D Width of C Width of inner ring B Width of bearing B oller set bore dia. F w d.. d Separable oller Follower on-separable oller Follower Cylindrical oller Follower Separable oller Follower Series Crowned h2 Metric series See Table. See Table. Table. Tolerances and allowable values of inner rings (Metric series) d ominal bore dia. Cylindrical See Table.2 h2 Crowned Table.2 Tolerances and allowable values of s (Metric series with Cylindrical ) D ominal outside dia. of Dmp Single plane mean outside dia. deviation Over Incl. High Low dmp Single plane mean bore dia. deviation Over Incl. High Low 2. 2 dsp Bore dia. variation in a single radial plane (Max.) Dsp Outside dia. variation in a single radial plane (Max.) 2 dmp Mean bore dia. variation (Max.) Dmp Mean outside dia. variation (Max.) Inch series K ia adial runout of assembled bearing inner ring (Max.) K ea adial runout of assembled bearing (Max.) Cylindrical unit: m See Table. unit: m Bs Width variation (Max.) unit: m Cs Width variation (Max.) Same as the tolerance values of Bs for d of the inner of the same bearing Table. Tolerances and allowable values of (Inch series cylindrical ) D ominal outside dia. of Over Incl. High Low Clearance Dmp Single plane mean outside dia. deviation 2 Table Tolerances of smallest single roller set bore diameter F ws min unit: m F w ominal roller set bore diameter adial internal clearances of oller Followers are based on Table 7. Table 7 adial internal clearance Separable oller Followers AST AST AST2 AST AST2 AST AST AST AST Fws min Deviation of smallest single roller set bore diameter Over Incl. High Low Metric series AT on-separable oller Followers AT AT2 AT AT AT2 AT AT AT 2 Cylindrical oller Followers Dsp Bore dia. variation in a single radial plane (Max.) 2 Fit Dmp Mean Bore dia. variation (Max.) 7 unit: m K ea adial runout of assembled bearing (Max.) oller Followers are generally used under the loading conditions in which the load direction is fixed in relation to the inner ring and rotates in relation to the. The recoended fits for shafts are shown in Table. Those for the inch series are shown in the dimension table. Table ecoended fit (Metric series) Type Separable oller Followers on-separable oller Followers Cylindrical oller Followers Inch series without inner ring with inner ring on-separable oller Followers 2 Tolerance class of shaft unit: m adial internal clearance Min. kk gh Max. 2 oller Followers UT UT- UT UT- 2 UT UT- CY2 CY CY ote( ) Also applicable to the full complement, cylindrical, shield and sealed. 7 7 =.2kgf=.2lbs. =.7inch 7

41 Track Capacity Allowable otational Speed 77 Track capacity is defined as the load that can be continuously applied on a oller Follower placed on a steel track surface without causing deformation and indentation on the track surface when the of the oller Follower makes contact with the mating track surface (plane). The track capacities shown in Tables. and.2 are applicable when the hardness of the mating track surface is HC (Tensile strength / 2 ). When the hardness of the mating track surface differs from HC, the track capacity is Table. Track capacity (Metric series) oller Followers with crowned Separable oller Followers AST ()AST ()AST ()AST ()AST2 ()AST ()AST7 ()AST ()AST2 ()AST ()AST ()AST ()AST ()AST on-separable oller Followers AT AT AT AT AT2 AT AT7 AT AT2 AT AT AT AT AT Cylindrical oller Followers UT UT- UT7 UT7- UT UT- UT2 UT2- UT UT- UT UT- UT UT- UT UT- UT UT- Table.2 Track capacity (Inch series) Track capacity Identification number AST ()AST ()AST ()AST ()AST2 ()AST ()AST7 ()AST ()AST2 ()AST ()AST ()AST ()AST ()AST otes( ) Also applicable to the full complement, shield, and sealed. ( 2 ) Also applicable to the sealed. unit: Crowned Cylindrical Identification number Track capacity Identification number Track capacity CY2 CY CY CY CY CY22 CY CY2 CY2 CY CY2 CY CY CY CY CY2 CY CY CY2 CY CY CY CY CY22 CY CY2 CY2 CY CY2 CY CY CY CY CY2 CY CY ote( ) Also applicable to the sealed. obtained by multiplying the value by the track capacity factor shown in Table. If lubrication between the and the mating track surface is insufficient, seizure and/or wear may occur depending on the application. Therefore, pay attention to lubrication and surface roughness of the mating track especially in the case of high-speed rotation such as for cam mechanisms. Track capacity oller Followers with cylindrical Table Track capacity factor Hardness HC Identification number 2 AST ZZ AST ZZ ASTZZ AST2ZZ ASTZZ AST7ZZ ASTZZ AST2ZZ ASTZZ ASTZZ ASTZZ ASTZZ ASTZZ Track capacity Identification number UT UT - UT 7 UT 7- UT UT - UT 2 UT 2- UT UT - UT UT - UT UT - UT UT - UT UT - Track capacity unit: Tensile strength Track capacity factor / 2 Crowned Cylindrical unit: The allowable rotational speed of oller Followers is affected by mounting and operating conditions. For reference, Table shows dn values when only pure radial loads are applied. Under actual operating conditions, the recoended dn value is / of the value shown in the table in consideration of the axial loads that may act on the bearing. Table dn values of oller Followers Type Cylindrical oller Follower ote Lubrication In ed Type oller Followers, Cylindrical oller Followers and Inch series oller Followers, ALAIA GEASE S2 (SHELL) is prepacked as the lubricating grease. For oller Followers without prepacked grease, grease or oil should be supplied through the oil hole of the inner ring for use. If they are used without lubrication, wear of rolling contact surfaces may take place, leading to a short bearing life. Oil Hole Open Type Separable oller Followers have no oil hole. Inner rings of other s of Metric series oller Followers have an oil hole. Inch series inner rings have an oil groove and an oil hole. Mounting Lubricant Grease 2 72 dn value d n where, dbore diameter of bearing notational speed rpm Oil 7 In case of shield and sealed s, match the side surface correctly to the mating seating surface indicated by the dimension a shown in the dimension table, and fix them. (See Fig..) 2 When mounting oller Followers, pay special attention to avoid locating the oil hole of the inner ring within the loading zone. This may lead to a short bearing life. (See Fig. 2.) When mounting ed Type Separable oller Followers, do not cause the side plates to come off. If they come off, set them again in place taking care to avoid damaging the seal lips. In case of oller Followers without an inner ring, the shaft requires heat treatment and grinding finish. The recoended surface hardness of the shaft is HC, and the recoended roughness of the shaft is.2 m a or less. Also, the and cage are guided by side surfaces of the mounting parts. Therefore, it is recoended that the side surfaces of the mounting parts be finished by grinding or at least by machining. (See Fig..) In on-separable oller Followers, the side plates are press-fitted. Therefore, when mounting the oller Followers, do not push the side plates. Fig. Mating seating dimension "a" Oil Hole Fig. 2 Position of oil hole and load direction Fig. Mounting example of oller Follower without inner ring =.2kgf=.2lbs. =.7inch 7 oller Followers

42 Separable oller Followers, Open Type With Cage/Without Inner ing Separable oller Followers, Open Type With Cage/With Inner ing Open Open Shield Shield ed ed Shaft dia Crowned AST AST AST Cylindrical Crowned AST AST 2 AST AST 7 AST AST 2 AST AST AST AST AST Open Cylindrical AST AST AST AST AST 2 AST AST 7 AST AST 2 AST AST AST AST AST Mass (ef.) ote( ) Minimum allowable value of chamfer dimension r emarks. o oil hole is provided. 2. ot provided with prepacked grease. Perform proper lubrication for use. g AST Boundary dimensions F w D C r s min Basic dynamic C AST Basic static C Shaft dia AST AST AST AST 2 AST AST 7 AST AST 2 AST AST AST AST Cylindrical Crowned Open Crowned Cylindrical AST AST AST AST 2 AST AST 7 AST AST 2 AST AST AST AST Mass (ef.) AST AST. ote( ) Minimum allowable value of chamfer dimension r or r emarks. o oil hole is provided. 2. ot provided with prepacked grease. Perform proper lubrication for use. g Boundary dimensions d D B C r s min..... r s min AST F w Basic dynamic C Basic static C AST Assembled inner ring LT S LT S LT 2 S LT 22 S LT 2 S LT 722 S LT 2 S LT 2 S LT S LT 2 S LT S LT S LT S oller Followers 7 =.2kgf=.2lbs. =.7inch

43 Separable oller Followers, Shield Type Separable oller Followers, ed Type With Cage/With Inner ing With Cage/With Inner ing Shaft dia AST AST Open Shield ed Cylindrical Crowned Crowned ZZ ZZ AST ZZ AST 2 ZZ AST ZZ AST 7 ZZ AST ZZ AST 2 ZZ AST ZZ AST ZZ AST ZZ AST ZZ AST ZZ Shield Cylindrical AST AST ZZ ZZ AST ZZ AST 2 ZZ AST ZZ AST 7 ZZ AST ZZ AST 2 ZZ AST ZZ AST ZZ AST ZZ AST ZZ AST ZZ Crowned AST AST ZZ ZZ AST ZZ AST 2 ZZ AST ZZ AST 7 ZZ AST ZZ AST 2 ZZ AST ZZ AST ZZ AST ZZ AST ZZ AST ZZ ed AST AST Cylindrical ZZ ZZ AST ZZ AST 2 ZZ AST ZZ AST 7 ZZ AST ZZ AST 2 ZZ AST ZZ AST ZZ AST ZZ AST ZZ AST ZZ ASTZZ emarks. The inner ring has an oil hole. 2. The sealed is provided with prepacked grease. The shield is not provided with prepacked grease. Perform proper lubrication for use. Mass (ef.) g Boundary dimensions d D B C a e f ASTZZ ASTZZ ASTZZ Basic dynamic C Basic static C oller Followers =.2kgf=.2lbs. =.7inch 2

44 on-separable oller Followers With Cage/With Inner ing Full Complement Type/With Inner ing Shield ed Cylindrical Crowned Shaft dia With cage AT Shield Crowned AT AT AT AT 2 AT AT 7 AT AT 2 AT AT AT AT AT AT AT 2 AT AT 7 AT AT 2 AT AT With cage AT AT AT AT AT 2 AT AT 7 ed Crowned AT AT 2 AT AT AT AT AT AT AT 2 AT AT 7 AT AT 2 AT AT AT Mass (ef.) g d D B C a Boundary dimensions AT AT AT Basic dynamic C Basic static C allowable static load oller Followers AT AT AT AT AT AT AT AT AT AT AT AT emarks. The inner ring has an oil hole. 2. The sealed is provided with prepacked grease. The shield is not provided with prepacked grease. Perform proper lubrication for use. =.2kgf=.2lbs. =.7inch

45 Cylindrical oller Followers Full Complement Type/With Inner ing Shield ed Cylindrical Crowned Shaft dia. 7 2 Crowned UT UT - UT 7 UT 7- UT UT - UT 2 UT 2- UT UT - UT UT - UT UT - UT UT - UT UT - ote( ) Minimum allowable value of chamfer dimension r or r emarks. The inner ring has an oil hole. 2. Provided with prepacked grease. Cylindrical UT UT - UT 7 UT 7- UT UT - UT 2 UT 2- UT UT - UT UT - UT UT - UT UT - UT UT - Mass (ef.) g Boundary dimensions d D B C a UT r s min.. r s min Basic dynamic C UT Basic static C allowable static load oller Followers =.2kgf=.2lbs. =.7inch

46 on-separable oller Followers, Inch Series Full Complement Type /With Inner ing Shield ed Cylindrical Crowned Stud dia. (inch).!/ 7. %/.2 #/.2 &/ 2.7!/2.7 %/. #/ !/.7!/ Crowned CY 2 CY CY CY CY CY 22 CY CY 2 CY 2 CY CY 2 CY CY CY CY CY 2 CY CY Shield Cylindrical CY 2 CY CY CY CY CY 22 CY CY 2 CY 2 CY CY 2 CY CY CY CY CY 2 CY CY Crowned CY 2 CY CY CY CY CY 22 CY CY 2 CY 2 CY CY 2 CY CY CY CY CY 2 CY CY ed Cylindrical CY 2 CY CY CY CY CY 22 CY CY 2 CY 2 CY CY 2 CY CY CY CY CY 2 CY CY Mass (ef.) emarks. The inner ring has an oil groove and an oil hole. 2. Provided with prepacked grease. g 2 d D CY Boundary dimensions (inch).!/. #/.2(.2).!/ &/.2(.2) 7. %/ 2. 7.(.7) 7. %/ 2.7!/ 7.(.7).2 #/.7!/.(.2).2 #/.2 #/.(.2).2 &/.!/ 2 2.(.7).2 &/.27 %/ 2.(.7) 2.7!/ 2. #/ 2.(.2) 2.7!/ &/ 2.(.2).7 %/..(.2).7 %/ 7.!/.(.2). #/.!/ 2.(.2). #/. #/.(.2) (.2) 2. 2.!/.(.2) 2.7!/.!/ 2 2.(2.2).7!/..7(2.2) B C 2.7!/ 2 2.7!/ 2.7 %/.7 %/. #/. #/ &/ &/ !/.7!/.!/ 2.!/ 2. #/. #/. 7.!/ a r.(.7).(.7).(.772).(.772) 2.(.) 2.(.) 2.(.) 2.(.) 2.7(.27) 2.7(.27).(.7).(.7).(.7).(.7).(2.2).(2.2).(2.7) 7.(2.77) CY CY CY !/2.7!/2. #/.!/.!/.!/.!/.!/.!/.!/.!/.!/ 2. #/2 2. #/2 2. #/2 2. #/2 2. #/2 2. #/2 Min Push fit Max Shaft dia. Min Drive fit Max Min Press fit Max Basic dynamic C Basic static C oller Followers 7 =.2kgf=.2lbs. =.7inch

47 Applications Special Specifications Miscellaneous Tables =.2kgf=.2lbs. =.7inch

48 Applications Machine Tools Palette changer Tool clamp Automatic Tool Changer CF-SFU UT Transfer System CF CF CF CFB CFB Linear Way H LWHTG =.2kgf=.2lbs. =.7inch 2

49 Applications Transfer System in Semiconductor manufacturing Equipment Cam mechanism in Connector Manufacturing Equipment C-Lube Unit for CL Shuttle fork CF B AST Elevator of manufacturing line AT CF WB /SG CF-FU AT =.2kgf=.2lbs. =.7inch

50 Applications Indexer Guide in Assembling machine CF Shell Type eedle oller Bearings TAW Cam Cam Shaft Stoke otary bushing ST Out put shaft Follower Wheel CFS Cam mechanis in Printing machine Machied eedle oller Bearings A AST odless Cylinder CF B CFW =.2kgf=.2lbs. =.7inch

51 Applications Cam meachanism in Manufacturing Equipment Lift for stairs Pick & Place Unit Ball Spline LSA CF CF B Diesel Engine AST Cam shaft valve lifter AST Cam roller AST Machied eedle oller Bearings TAF CF AST 7 =.2kgf=.2lbs. =.7inch

52 Special specifications Groove on Groove on Stud with groove Stud with groove Groove for Pulley on Groove for Pulley on Spherical Polyurethane rubber on Short stud Polyurethane rubber on Long stud D-cut on stud Stud with Tapped machine end With grease nipple -cut on stud Stud with hole With thrust needle bearing incorporated Grease nipple Thrust needle bearing =.2kgf=.2lbs. =.7inch

53 Miscellaneous Tables Conversion Table of Units Comparison table between SI units (system of international units), CGS units and gravitational system of units Item System of units SI units CGS units Grav. units Length Mass Time Acceleration Force Stress Pressure m cm m kg g kgfs 2 /m Conversion rates into SI units s s s m/s 2 Gal m/s 2 dyn kgf Pa dyn/cm 2 kgf/m 2 Pa dyn/cm 2 kgf/m 2 Item Unit name Symbol Conversion rate into SI SI unit name Symbol Angle Length Degree Minute Second Meter Micronmeter Angstrom X-ray unit autical mile m Å n mile / / / adian Meter rad m Area olume Square meter m 2 Are a 2 Hectare ha Cubic meter m Liter l, L - Square meter Cubic meter m 2 m Mass Kilogram Ton Atomic mass unit Second kg t u s Kilogram kg Time Minute min Hour h Second s Day d elocity Meter per second m/s Knot kn 2/ Meter per second m/s Frequency and number of oscillations per time otation speed Angular velocity Cycle otation per minute adian per second s - rpm rad/s / Hertz Per second adian per second Hz s - rad/s Acceleration Meter per square second m/s 2 G G. Meter per square second m/s 2 Force Moment of force Kilogram force Ton force Dyne Kilogram force-meter kgf tf dyn kgfm.. -. ewton ewton-meter m Stress and pressure Kilogram force per square meter Kilogram force per square centimeter Kilogram force per square millimeter kgf/m 2 kgf/cm 2 kgf/ 2... Pascal Pa Energy Power Temperature iscosity Kinematic viscosity Magnetic flux Magnetic flux density Magnetic field intensity J erg kgfm W erg/s kgfm/s K C C Pas P kgfs/m 2 m 2 /s St m 2 /s Item Unit name Symbol Conversion rate into SI SI unit name Symbol Pressure Energy Power iscosity Kinematic viscosity Temperature adioactivity Exposure dose Absorbed dose Dose equivalent Magnetic flux Magnetic flux density Magnetic field intensity Quantity of electricity Electric potential difference Electrostatic capacity (Electric) resistance (Electric) conductance Inductance Current Hydro-column meter Mercurial column millimeter Torr Atmosphere Bar Erg IT calorie Kilogram force - meter Kilowatt hour Horse power hour (French) Electron volt Watt Horse power (French) Kilogram force -meter per second Poise Centipoise Kilogram force-second per square meter Stokes Centistokes Degree Curie oentgen ad em Maxwell Gaa Gauss Oersted Coulomb olt Farad Ohm Siemens Henry Ampere mh2o Hg Torr atm bar erg calt kgfm kwh PSh e W PS kgfm/s P cp kgfs/m 2 St cst C Ci rad rem Mx Gs Oe C F S H A Wb Mx. 2/7 2/ / Pascal Joule Watt T Gs Pascal-second Square meter per second Kelvin Becquerel Coulomb per kilogram Gray Sievert Weber Tesla Ampere per meter Coulomb olt Farad Ohm Siemens Henry Ampere A/m Oe Pa J W Pas m 2 /s K Bq C/kg Gy Sv Wb T A/m C F S H A =.2kgf=.2lbs. =.7inch 2

54 =.2kgf=.2lbs. =.7inch () () () (2) () () () () (2) () (.) (.) (.) (7.) (7.) (.) (.) (.) (.) (.) (2.) (.) (.) ockwell C scale hardness Load 7 HC Shore hardness HS ickers' hardness H Brinell hardness Standard ball Tungsten carbide ball ockwell hardness A scale Load. Diamond circular cone B scale Load.7 /" ball Miscellaneous Tables Hardness Conversion Table (eference) () (7) (7) () (7) (722) (7) () (7) () () ockwell C scale hardness Load 7 HC Shore hardness HS ickers' hardness H Brinell hardness Standard ball Tungsten carbide ball ockwell hardness A scale Load. Diamond circular cone B scale Load.7 /" ball

55 Miscellaneous Tables Torrance of Shaft dia. unit: m ominal Diameter b2 c2 d e e2 f f g g h h h7 h h h h ominal Diameter Over Incl. High Low High Low High Low High Low High Low High Low High Low High Low High Low High Low High Low High Low High Low High Low High Low High Low Over Incl ominal Diameter Over 22 2 Incl h2 h js j js j j7 k High Low High Low High Low High Low High Low High Low High Low High Low High k m m n n p ominal Diameter Low High Low High Low High Low High Low High Low Over Incl unit: m =.2kgf=.2lbs. =.7inch

56 Miscellaneous Tables Tolerance of Housing Bore Diameter unit: m ominal Diameter B2 E7 E E2 F F7 G G7 H H7 H H H H JS J ominal Diameter Over Incl. High Low High Low High Low High Low High Low High Low High Low High Low High Low High Low High Low High Low High Low High Low High Low High Low Over Incl ominal Diameter Over 22 2 Incl JS7 J7 K K K7 M M7 High Low High Low High Low High Low High Low High Low High Low High Low P P7 7 S7 High Low High Low High Low High Low High Low ominal Diameter Over 22 2 unit: m Incl =.2kgf=.2lbs. =.7inch

57

58 O w rde em eb: r f r h ai tt om l: p: M sa // le md ary s@ m la n e m tr d dm ic. M e c et om tri cs ric.c om ew Jersey, U.S.A The etherlands Illinois, U.S.A Düsseldorf, Germany California, U.S.A egensburg, Germany Silicon alley, U.S.A United Kingdom Georgia, U.S.A Spain Texas, U.S.A France Main entrance of Gifu plant Show room TODAY 2