Features of the Cam Follower

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Features of the Cam Follower"

Transcription

1 507E Features and Types Features o the ring Seal Side plate Stud Needle roller Cage Fig.1 Structure o Model CF UU-A Structure and Features The is a compact and highly rigid bearing with a shat. It contains needle rollers and is used as a guide roller or cam mechanisms or straight motion. Since its rotates while keeping direct contact with the mating surace, this product is thickwalled and designed to bear an impact load. Inside the, needle rollers and a precision cage are incorporated. This prevents the product rom skewing and achieves a superb rotation perormance. And, as a result, the product is capable o easily withstanding high-speed rotation. There are two types o the in shape: spherical and cylindrical. The spherical easily absorbs a distortion o the shat center when the cam ollower is installed and helps lighten a biased load. The is used in a wide range o applications such as cam mechanisms o automatic machines, dedicated machines as well as carrier systems, conveyors, bookbinding machines, tool changers o machining centers, pallet changers, automatic coating machines, and sliding orks o automatic warehouses. A

2 507E Features and Types Features o the with Grease Nipple With previous models it was necessary to abricate a jig in order to install a plug or grease nipple. The Model CF-AB with grease nipples comes equipped with grease nipples on both sides, so it can be used immediately, without modii cation. An Allen wrench can be used to anchor the stud rom either the head or the threaded end, and it can be lubricated rom either end as well. This ensures that there will be adequate space to install the unit and perorm maintenance, improving work ei ciency. Dedicated nozzle o Grease Gun Unit Jig Grease nipple Grease nipple Jig Dedicated nozzle o Grease Gun Unit CF-AB Conventional type Containing Thrust Balls Even a slight mounting error in a high speed cam mechanism operating in a harsh environment could cause abnormal wear to the thrust unit o the cam ollower. In such a case, using Containing Thrust Balls model CFN will bring about a signiicant eect in increasing the durability. Models CFN5 to 12 are standard-stock items. I desiring a size other than the standard items, contact THK. Model CFN is capable o receiving a thrust load caused by a slight mounting error. However, it is necessary to minimize a component o thrust orce, or prevent it rom occurring, when designing the cam mechanism and installing the Cam Follower. Fig.2 A

3 Types o the Types and Features with Grease Nipple Model CF-AB A hexagonal socket is provided on both stud ends, and a grease nipple or greasing is i tted to the inside. Thereore, lubrication and mounting rom both directions is possible. Speciication Table Stud : mm Model CF-AB Popular Type Model CF It is a popular type o provided with a driver groove on the head o the stud. Speciication Table Stud : 5 10 mm Model CF with a Hexagon Socket Model CF-A Since the stud head has a hexagon socket, this model can easily be installed using a hexagon wrench. Speciication Table Stud : 3 10 mm Model CF-A A

4 Features and Types Types o the Eccentric Models CFH-AB, CFH-A Because there is an eccentricity o 0.25 to 1.0 mm between the mounting shat o the stud and the stud head, slight positioning adjustments can easily be made simply by rotating the stud. This eliminates the need to align the cam ollower with the cam groove or perorm precision machining on the mounting hole, greatly reducing the time and labor required or machining and assembly. Model CFH-AB: Equipped with grease nipple and hexagonal sockets; compatible with stud s o 12 to 30 mm. Model CFH-A: Equipped with hexagonal sockets; compatible with stud s o 5 to 10 mm. Speciication Table Model CFH-A Containing Thrust Balls Model CFN-R-A On the inside, this model is equipped with thrust-load ball bearings. This eectively prevents riction and wear on the slip surace when a thrust load occurs due to aulty installation or the like. Stud : 5 12 mm with a Tapped Hole or Greasing Model CFT Basically the same as the popular type Cam Follower, this model is provided with tapped holes or piping on the stud head and the thread. It is optimal or locations where an integrated piping or greasing is required. Speciication Table Model CFN-R-A Speciication Table Stud : 6 30 mm Model CFT A

5 -ring Compact-type Model CFS-A Speciication Table This contains extremely ine needle rollers. The external is extremely small relative to the stud, allowing a compact design. Stud : mm Model CFS-A Easy-mount Model CF-SFU For easy mounting, the stud is equipped with a slot enabling it to be secured with a screw. This greatly reduces the time and labor required or installation and is ideal or applications where there is no space to secure the stud with a nut. Speciication Table Stud : 6 20 mm Model CF-SFU Model NUCF-AB Double-row Cylindrical-roller This model, which employs a double row o cylindrical rollers, can accommodate high radial loads. A hexagonal socket is provided on both stud ends, and a grease nipple or greasing is i tted to the inside. Thereore, lubrication and mounting rom both directions is possible. Stud : mm Speciication Table Model NUCF-AB A

6 Features and Types Types o the Options Note: Dierent eatures and options are available, depending on the model. For details, please reer to the dimension table or the product in question. Roller guide With cage No Symbol The caged ormat, which oers optimal lubrication conditions, is best or high-speed rotation. Full rollers V The ull-complement roller ormat is best or low-speed rotation and heavy loads. Note: Please make sure to ollow the lubrication schedule. Type o material Carbon steel and stainless steel are available. Stainless steel, which is more resistant to corrosion, is the best choice or use in clean rooms and other oil-ree environments. With/without a seal Without seal No symbol Seal With seal UU Equipped with a highly wear-resistant synthetic rubber seal to keep oreign matter out o the unit's interior. ring outer surace coniguration Flat Curved Cylindrical No Symbol This model oers an expansive area o contact between rolling suraces and is thereore ideal or heavy loads and low-rigidity rolling suraces. Spherical R This helps alleviate the eects o an eccentric load in the event o adverse conditions around the and rolling surace. A

7 Model CF-AB with Grease Nipple nipple C B3 Optional speciications Symbol Roller guide With cage No Symbol Full rollers V Material Carbon steel No Symbol Stainless steel M Seal Without seal No Symbol With seal UU ring Cylindrical No Symbol shape Spherical R H D r B C1 2 B2 G1 nipple G H B1 Stud Threaded ring width Main dimensions Overall length Shoulder height d Model No. D C G G 1 B B 1 B 2 B 3 C 1 d 2 H r smin (Min.) 12 CF 12-AB M CF 12-1-AB M CF 16-AB M CF 18-AB M CF 20-AB M CF 20-1-AB M CF 24-AB M CF 24-1-AB M CF 30-AB M CF 30-1-AB M CF 30-2-AB M Note) For inormation on accuracy standards, please reer to. Model number coding CF12 V M UU R -AB Model No. Note) For accessories, see. No symbol: With cage V : Full-roller Type No symbol: Carbon steel M : Stainless steel Stud With Hexagonal Socket At Both Ends No Symbol : Cylindrical R : Spherical No symbol: Without seal UU : With seal

8 R500 (CF12 to CF18) R1000 (CF20 or higher) R500 (CF12 to CF18) R1000 (CF20 or higher) Model CF-R-AB Model CF-UUR-AB Basic Load Rating With cage Full rollers Maximum permissible load Track Load Capacity Rotational speed limit * Cylindrical Spherical With cage Full rollers With cage Unit: mm Mass Full rollers C C 0 C C 0 F 0 kn kn kn kn kn kn kn min 1 min 1 g g Note) The rotation speed limit value in the table (*) applies to models that have no seal and use grease lubrication. With those models using oil lubrication, up to 130% o this value is permitted. With those attached with seals, up to 70% o this value is permitted.

9 Model CF (Popular Type) C Optional speciications Symbol Roller guide With cage No Symbol Full rollers V Material Carbon steel No Symbol Stainless steel M Seal Without seal No Symbol With seal UU ring Cylindrical No Symbol shape Spherical R φ D φ d1 r B C1 φ d B2 G1 G B1 Stud ring width Threaded Main dimensions Overall length Shoulder height d Model No. D C G G 1 B B 1 B 2 C 1 d 1 r smin (Min.) 5 CF M CF M CF M CF M CF M Note) For inormation on accuracy standards, please reer to. Model number coding CF6 V M UU R -N Model No. No symbol: No grease nipple No symbol: With cage N : Dedicated grease nipple included See V : Full-roller Type No symbol: Carbon steel M : Stainless steel no symbol: without seal No Symbol : Cylindrical UU : With seal R : Spherical Note) Full-roller Type is applicable or Stud Diameter 6 to 10.

10 φ R250 (CF5) R500 (CF6 to CF10) R250 (CF5) R500 (CF6 to CF10) Model CF-R Basic load rating With cage Full rollers Maximum permissible load Model CF UUR Track load capacity Rotational speed limit * Mass Cylindrical Spherical With cage Full rollers With cage Unit: mm Full rollers C C 0 C C 0 F 0 kn kn kn kn kn kn kn min -1 min -1 g g Note) The rotation speed limit value in the table (*) applies to models that have no seal and use grease lubrication. With those models using oil lubrication, up to 130% o this value is permitted. With those attached with seals, up to 70% o this value is permitted.

11 with Hexagon Socket Model CF-A Optional speciications Symbol Roller guide With cage No Symbol Full rollers V Material Carbon steel No Symbol Stainless steel M Seal Without seal No Symbol With seal UU ring Cylindrical No Symbol shape Spherical R φ φ Stud Main dimensions Threaded Overall ring length width Shoulder height d Model No. D C G G 1 B B 1 B 2 C 1 H r smin (Min.) 3 CF 3-A 10 7 M (1.5) CF 4-A 12 8 M (2) CF 5-A 13 9 M (2.5) CF 6-A M CF 8-A M CF 10-A M CF 10-1-A M Note) For inormation on accuracy standards, please reer to. Those models do not have a greasing hole and cannot be replenished with grease. Model number coding CF10 V M UU R -A N Model No. No symbol: No grease nipple No symbol: With cage N : Dedicated grease nipple included (see ) V : Full-roller Type Stud head with a hexagon socket No symbol: Carbon steel No Symbol : Cylindrical M : Stainless steel R : Spherical no symbol: without seal UU : With seal Note) Full-roller Type is applicable or Stud Diameter 6 to 10.

12 φ R250 (CF5 or lower) R500 (CF6 to CF10) R250 (CF5 or lower) R500 (CF6 to CF10) With cage Basic load rating Model CF-R-A Full rollers Maximum permissible load Model CF UUR-A Unit: mm Track load capacity Rotational speed limit * Mass Cylindrical Spherical With cage Full rollers With cage Full rollers C C 0 C C 0 F 0 kn kn kn kn kn kn kn min -1 min -1 g g Note1) indicates that the dimensions in the parentheses in this row apply to stainless steel types. The rotation speed limit value in the table (*) applies to models that have no seal and use grease lubrication. With those models using oil lubrication, up to 130% o this value is permitted. With those attached with seals, up to 70% o this value is permitted.

13 Eccentric with Grease Nipple Model CFH-AB Optional speciications Symbol Roller guide With cage No Symbol Full rollers V Material Carbon steel No Symbol Stainless steel M Seal Without seal No Symbol With seal UU ring Cylindrical No Symbol shape Spherical R H nipple D r C B C1 B2 G1 nipple G H e B1 Stud ring Threaded width Main dimensions Overall length Runout Shoulder height d Model No. D C G G 1 B B 1 B 2 C 1 e H r smin (Min.) 12 CFH 12-AB M CFH 12-1-AB M CFH 16-AB M CFH 18-AB M CFH 20-AB M CFH 20-1-AB M CFH 24-AB M CFH 24-1-AB M CFH 30-AB M CFH 30-1-AB M CFH 30-2-AB M Note) For inormation on accuracy standards, please reer to. Model number coding CFH12 V M UU R -AB Model No. Note) For accessories, see. No symbol: With cage V : Full-roller Type No symbol: Carbon steel M : Stainless steel Stud With Hexagonal Socket At Both Ends No Symbol : Cylindrical R : Spherical No symbol: Without seal UU : With seal

14 R500 (CFH18 or lower) R1000 (CFH20 or higher) R500 (CFH18 or lower) R1000 (CFH20 or higher) Model CFH-R-AB Model CFH-UUR-AB Basic Load Rating With cage Full rollers Maximum permissible load Track load capacity Rotational speed limit * Mass Cylindrical Spherical With cage Full rollers With cage Unit: mm Full rollers C C 0 C C 0 F 0 kn kn kn kn kn kn kn min 1 min 1 g g Note) The rotation speed limit value in the table (*) applies to models that have no seal and use grease lubrication. With those models using oil lubrication, up to 130% o this value is permitted. With those attached with seals, up to 70% o this value is permitted.

15 Eccentric with Hexagon Socket Model CFH-A Optional speciications Symbol Roller guide With cage No Symbol Full rollers V Material Carbon steel No Symbol Stainless steel M Seal Without seal No Symbol With seal UU ring Cylindrical No Symbol shape Spherical R H φ D r C B φ d G1 C1 B1 B2 φ d1 G e Stud ring width Threaded Main dimensions Overall Runout Shoulder length height d Model No. D C G G 1 B B 1 B 2 C 1 e H r smin (Min.) 5 CFH 5-A 13 9 M CFH 6-A M CFH 8-A M CFH 10-A M CFH 10-1-A M Note) THK also manuactures types that have a driver groove and a greasing hole on the head. (Model numbers o types with a driver groove do not include symbol -A in the end.) For inormation on accuracy standards, please reer to. Those models do not have a greasing hole and cannot be replenished with grease. Model number coding CFH10 V M UU R -A N Model No. No Symbol : No grease nipple No symbol: With cage N : Dedicated grease nipple included See V : Full-roller Type Stud head with a hexagon socket No symbol: Carbon steel No Symbol : Cylindrical M : Stainless steel R : Spherical no symbol: without seal UU : With seal Note) Full-roller Type is applicable or Stud Diameter 6 to 10.

16 φ Model CFH-R Basic load rating With cage Full rollers Maximum permissible load Model CFH UUR Track load capacity Rotational speed limit * Mass Cylindrical Spherical With cage Full rollers With cage Unit: mm Full rollers C C 0 C C 0 F 0 kn kn kn kn kn kn kn min -1 min -1 g g Note1) : Model CFH5M-A is available only in carbon steel. Note2) The rotation speed limit value in the table (*) applies to models that have no seal and use grease lubrication. With those models using oil lubrication, up to 130% o this value is permitted. With those attached with seals, up to 70% o this value is permitted.

17 Containing Thrust Balls Model CFN-R-A Optional speciications Symbol Roller guide With cage No Symbol Material Carbon steel No Symbol Seal Without seal No Symbol ring shape Spherical R H φ D r C B3 φ d2 φ d G1 φ d1 G B C1 B1 R250 (CFN5) R500 (CFN6 to CFN12) B2 Stud Model No. Main d Spherical ring width Threaded Overall length D C G G 1 B B 1 B 2 B 3 C 1 d 1 5 CFN 5R-A 13 9 M CFN 6R-A M CFN 8R-A M CFN 10R-A M CFN 12R-A M Note) For inormation on accuracy standards, please reer to. Those models marked with do not have a greasing hole and cannot be replenished with grease. Model number coding CFN12 R -A N Model No. No Symbol : No grease nipple R Spherical N : Dedicated grease nipple included See Stud head with a hexagon socket

18 φ Unit: mm dimensions Basic load rating Permissible thrust load Maximum permissible load Rotational Track load speed capacity limit * Mass Shoulder height C C 0 F 0 d 2 H r smin (Min.) kn kn N kn kn min -1 g Note) The rotation speed limit value in the table (*) applies to models using grease lubrication. With those models using oil lubrication, up to 130% o this value is permitted.

19 with Tapped Greasing Hole Model CFT C B3 Optional speciications Symbol Roller guide With cage No Symbol Full rollers V Material Carbon steel No Symbol Stainless steel M Seal Without seal No Symbol With seal UU ring Cylindrical No Symbol shape Spherical R φ D S1 r B φ d2 φ d C1 B2 G1 S1 G B1 Stud ring Threaded width Main dimensions Overall length Shoulder height d Model No. D C G G 1 B B 1 B 2 B 3 C 1 S 1 d 2 r smin (Min.) 6 CFT M M CFT M M CFT M M CFT M M CFT M M CFT M M CFT M PT 1/ CFT M PT 1/ CFT M PT 1/ CFT M PT 1/ CFT M PT 1/ CFT M PT 1/ CFT M PT 1/ CFT M PT 1/ CFT M PT 1/ Note) For inormation on accuracy standards, please reer to. Those models marked with have a greasing hole only on the head. Model number coding CFT30-1 V M UU R -N Model No. No symbol: With cage V : Full-roller Type No symbol: Carbon steel M : Stainless steel No Symbol : No grease nipple N : Dedicated grease nipple included See No Symbol: Cylindrical R : Spherical No symbol: Without seal UU : With seal

20 φ R500 (CFT18 or lower) R1000 (CFT20 or higher) R500 (CFT18 or lower) R1000 (CFT20 or higher) Model CFT-R Model CFT UUR With cage Basic load rating Full rollers Maximum permissible load Track load capacity Rotational speed limit * Mass Cylindrical Spherical With cage Full rollers With cage Unit: mm Full rollers C C 0 C C 0 F 0 kn kn kn kn kn kn kn min -1 min -1 g g Note) The rotation speed limit value in the table (*) applies to models that have no seal and use grease lubrication. With those models using oil lubrication, up to 130% o this value is permitted. With those attached with seals, up to 70% o this value is permitted.

21 -ring Compact-type Model CFS-A C Optional speciications Symbol Roller guide With cage No Symbol Full rollers V Material Carbon steel No Symbol Stainless steel M Seal Without seal No Symbol ring shape Cylindrical No Symbol H φ D B C1 φ d B2 G1 G B1 Stud ring width Threaded Main dimensions Overall length Shoulder height d Model No. D C G G 1 B B 1 B 2 C 1 H (Min.) 2.5 CFS 2.5-A 5 3 M CFS 3-A 6 4 M CFS 4-A 8 5 M CFS 5-A 10 6 M CFS 6-A 12 7 M Note) For inormation on accuracy standards, please reer to. Model number coding CFS3 V M -A Model No. No symbol: With cage V : Full-roller Type No symbol: Carbon steel M : Stainless steel Stud head with a hexagon socket Note) Model CFS is only compatible with cylindrical types without seals and with stud head hexagon sockets.

22 φ Unit: mm With cage Basic load rating Full rollers Maximum permissible load Track load capacity Cylindrical outer ring Mass With cage Full rollers C C 0 C C 0 F 0 kn kn kn kn kn kn g g Since model CFS does not have a greasing hole, it cannot be replenished with grease.

23 Easy-mount Model CF-SFU C l1 l2 Optional speciications Symbol Roller guide With cage No Symbol Material Carbon steel No Symbol Seal With seal No Symbol ring Cylindrical No Symbol shape Spherical R φ D φ d1 r φ d B C1 e B2 90 B1 Stud ring width Overall length Main dimensions d Model No. D C B B 1 B 2 C 1 l 1 l 2 d 1 r smin e 6 CF-SFU CF-SFU CF-SFU CF-SFU CF-SFU CF-SFU CF-SFU CF-SFU CF-SFU CF-SFU Note) For inormation on accuracy standards, please reer to. Model number coding CF-SFU-6 R -N Model No. No Symbol : Cylindrical R : Spherical No Symbol : No grease nipple N : Dedicated grease nipple included See Note) Model CF-SFU is itted with UU seals even where no UU symbol is used.

24 h t φ φ H R500 (CF-SFU-6 to CF-SFU-18) R1000 (CF-SFU-20 or higher) Model CF-SFU R Mounting dimension H Mounting dimensions Shoulder height Basic load rating Maximum permissible With cage load Track load capacity Cylindrical Spherical Rotational speed limit * With cage Unit: mm Mass With cage Tolerance t h C C 0 F 0 H7 (Min.) (Min.) (reerence value) kn kn kn kn kn min -1 g Note) *The rotational speed limit applies to models with grease lubrication and seals. Model CF-SFU is delivered with a stopper plug i tted.

25 Double-row Cylindrical-roller Model NUCF-AB nipple r C B3 nipple Optional speciications Symbol Roller guide Full rollers No Symbol Material Carbon steel No Symbol Seal Without seal No Symbol ring Cylindrical No Symbol shape Spherical R H φ D φ d φ d2 G1 G H C1 B B2 B1 Stud ring width Threaded Main dimensions Overall length Shoulder height d Model No. D C G G 1 B B 1 B 2 B 3 C 1 d 2 H r smin (Min.) 16 NUCF 16-AB M NUCF 18-AB M NUCF 20- AB M NUCF 20-1-AB M NUCF 24-AB M NUCF 24-1-AB M NUCF 30-AB M NUCF 30-2-AB M Note) For inormation on accuracy standards, please reer to. Model number coding NUCF16 R -AB Model No. AB: Stud With Hexagonal Socket At Both Ends No Symbol: Cylindrical R : Spherical Note) For accessories, see.

26 φ R500 (NUCF18 or lower) R1000 (NUCF20 or higher) Unit: mm Basic load rating Maximum permissible load Track load capacity Cylindrical Spherical Rotational speed limit Mass C C 0 F 0 kn kn kn kn kn min -1 g

114 NOSE SEIKO CO.,LTD NOSE SEIKO CO.,LTD

114 NOSE SEIKO CO.,LTD NOSE SEIKO CO.,LTD 114 NOSE SEIKO CO.,LTD NOSE SEIKO CO.,LTD 115 and Part Code Applicable axis diameter Feature Part Code 5 ~ 3 General purpose cam follower with screwdriver groove on the stud head. Available with stainless

More information

HSR. LM Guide Global Standard Size Model HSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use

HSR. LM Guide Global Standard Size Model HSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use LM Guide Global Standard Size Model Retainer plate Endplate End seal Grease nipple Ball Retainer plate Inner seal (Optional) Side seal LM rail Cross section 45 45 Point of Selection A Point of Design Options

More information

SSR. Caged Ball LM Guide Radial Type Model SSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use

SSR. Caged Ball LM Guide Radial Type Model SSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use Caged Ball LM Guide Radial Type Model Endplate LM block End seal LM 90 30 Ball Ball cage Cross section * For the Ball Cage, see A. Point of Selection A Point of Design Options Precautions on Use Accessories

More information

SHS. Caged Ball LM Guide Global Standard Size Model SHS. Point of Selection. Point of Design. Options. Model No. Precautions on Use

SHS. Caged Ball LM Guide Global Standard Size Model SHS. Point of Selection. Point of Design. Options. Model No. Precautions on Use Caged Ball LM Guide Global Standard Size Model LM block LM rail Endplate End seal 45 Ball Ball cage Cross section 45 * For the Ball Cage, see. Point of Selection Point of Design Options Model No. Precautions

More information

HSR-M1. LM Guide High Temperature Type Model HSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use

HSR-M1. LM Guide High Temperature Type Model HSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use LM Guide High Temperature Type Model Endplate SUS304 End seal (High temperature rubber material) LM THK-EX50 Ball SUS440C Side seal (High temperature rubber material) LM rail THK-EX50 Cross section 45

More information

Track Rollers/ Cam Followers

Track Rollers/ Cam Followers Track Rollers/ Cam Followers Page Nomenclature...................................... 460 Introduction....................................... 462 Identification....................................... 462

More information

Features of the Slide Pack

Features of the Slide Pack BER AB тел. (495) 727-22-72 thk-mail@ya.ru Features and Types Features of the Mounting plate Ball Ball case Slide rail Seal uide plate Stopper Slider Structure and Features Fig.1 Structure of Model FBW-RUU

More information

HSR-M1VV. LM Guide Medium-to-low Vacuum Type Model HSR-M1VV. Point of Selection. Point of Design. Options. Model No. Precautions on Use

HSR-M1VV. LM Guide Medium-to-low Vacuum Type Model HSR-M1VV. Point of Selection. Point of Design. Options. Model No. Precautions on Use LM Guide Medium-to-low Vacuum Type Model LM block: THK-EX50 (martensitic stainless steel) End plate: SUS304 Labyrinth end seal dedicated for Medium-to-Low Vacuum: SUS304 Upper plate: SUS316L LM rail: THK-EX50

More information

Features of the LM Guide

Features of the LM Guide Features of the Functions Required for Linear Guide Surface Large permissible load Highly rigid in all directions High positioning repeatability Running accuracy can be obtained easily High accuracy can

More information

Cam Follower Bearings

Cam Follower Bearings Cam Follower Bearings RegalPTS.com/McGill McGill Precision Bearings Reduce Operating Cost CAMROL Cam Follower Selection Guide Condition How to identify Potential Solutions General Purpose Applications

More information

Caged Roller LM Guide

Caged Roller LM Guide Caged Roller LM Guide SRG/SRN Ultra-high Rigidity Long-term Maintenance-free Operation Smooth Motion Wide Array of Options For details, visit THK at www.thk.com Product information is updated regularly

More information

LM Guide HCR/HMG. R Guide / Straight-Curved Guide Achieving a Simplified Mechanism. For details, visit THK at CATALOG No.

LM Guide HCR/HMG. R Guide / Straight-Curved Guide Achieving a Simplified Mechanism. For details, visit THK at  CATALOG No. LM Guide HCR/HMG R Guide / Straight-Curved Guide Achieving a Simplified Mechanism For details, visit THK at www.thk.com Product information is updated regularly on the THK website., CATALOG No.306-8E HCR

More information

Features of the LM Guide

Features of the LM Guide Features of the Functions Required for Linear Guide Surface Large permissible load Highly rigid in all directions High positioning repeatability Running accuracy can be obtained easily High accuracy can

More information

14 Track runner bearings

14 Track runner bearings 14 Track runner bearings Designs and variants............... 1100 Cam rollers... 1100 Single row cam rollers............. 1100 Double row cam rollers............ 1100 Support rollers... 1101 Support rollers

More information

Ball. Ball cage. Fig.1 Structure of Caged Ball LM Guide Actuator Model SKR

Ball. Ball cage. Fig.1 Structure of Caged Ball LM Guide Actuator Model SKR Caged all LM Guide Actuator Model Inner block all screw shaft Grease nipple Outer rail all cage all Structure and Features Fig.1 Structure of Caged all LM Guide Actuator Model Caged all LM Guide Actuator

More information

Inner block. Grease nipple. Fig.1 Structure of LM Guide Actuator Model KR

Inner block. Grease nipple. Fig.1 Structure of LM Guide Actuator Model KR LM Guide ctuator Model LM Guide + all Screw = Integral-structure ctuator Stopper Housing all screw Inner block Grease nipple Outer rail earing (supported side) Housing Stopper Double-row ball circuit earing

More information

McGill CAMROL Bearings

McGill CAMROL Bearings McGill CAMROL Bearings Overview Features & Benefits Competition Product Selection Markets & Applications Summary Key Contacts 2 Product Overview Invented by McGill in 1937 Replaced designs using bolt &

More information

FAG Angular Contact Thrust Ball Bearings double direction

FAG Angular Contact Thrust Ball Bearings double direction FAG Angular Contact Thrust Ball Bearings Basic designs Tolerances Preload Speed suitability Cage Lubrication are precision bearings with narrow tolerances. They are mainly used in precisiopindles of machine

More information

One-way Clutches Tension Pulleys, Bottom Roller Bearings

One-way Clutches Tension Pulleys, Bottom Roller Bearings One-way Clutches Tension Pulleys, Bottom Roller Bearings One-way clutches One-way Clutches This is a compact and roller type one-way clutch which formed a cam face on its outer ring. (Available shaft diameter

More information

Motion Technologies Bearing Products

Motion Technologies Bearing Products Page 1 of 12 Motion Technologies Bearing Products LARGE DIAMETER BEARINGS (conventional design) o Deep groove ball to 1900mm bore page 3 o Four point contact ball to 500mm bore page 3 o Single row angular

More information

Needle Roller Bearings

Needle Roller Bearings Needle Roller Bearings INTERPRECISE Donath GmbH Ostring 2 90587 Obermichelbach Germany Phone +49-911-76630-0 Fax +49-911-76630-30 info@interprecise.de www.idc-bearings.com Needle roller bearings with flanges

More information

SKF FAG Timken NSK NTN

SKF FAG Timken NSK NTN BEARINGS Rolling vs. Sliding Provides support for machine elements, while allowing smooth motion. µ = 0.001-0.005 Plain Bearings (Sliding/Hydrodynamic/ Journal/Sleeve) Rolling-Element Bearings Types Selection

More information

Introduction of Each Series

Introduction of Each Series 12 Introduction of Each Series 12.1 eavy Load Type, MSA Series A. Construction LINEAR GUIDEWAY Upper Retainer Carriage End Cap End Seal Grease Nipple Ball Lower Retainer Rail 45 eavy Load Type, MSA Series

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION Radial Roller Bearings Fitting and Mounting Fixed Bearings and Float Bearings Radial and axial loads in bearing units can be transmitted by fixed and floating bearings A fixed bearing is generally used

More information

C-Lube Linear Way MV

C-Lube Linear Way MV -Lube Linear Way 49 50 -Lube Maintenance Free Series -Lube Linear Way Long term maintenance free compliant! The aquamarine end plate is the symbol of maintenance free. Designation of Identification Number

More information

Cost Effective Screw series

Cost Effective Screw series Cost Effective Screw series Ball Screws Compliant with the New Accuracy Standards New Series CES (Pronounced sees ) Simple-Nut Type BIF Double-Nut Type BNFN (build to order) Single-Nut Type BNF (build

More information

Ballscrews / Linear Guideway General Catalog

Ballscrews / Linear Guideway General Catalog Ballscrews / inear Guideway General Catalog inear Guideway 2 Introduction of ach Series 2. eavy oad Type, MSA Series A. Construction Upper Retainer Carriage nd Seal nd Cap Rail Grease Nipple Ball 45 ower

More information

Cylindrical roller bearings

Cylindrical roller bearings Cylindrical roller bearings Cylindrical roller bearings are manufactured in a various range of constructive types and sizes, particularly single row cylindrical roller bearings but also two or more row

More information

High-Speed Ball Screw with Ball Cage. Low noise Long-term, maintenance free operation Low torque fluctuation DN value 130,000 SBN. CATALOG No.

High-Speed Ball Screw with Ball Cage. Low noise Long-term, maintenance free operation Low torque fluctuation DN value 130,000 SBN. CATALOG No. High-Speed Ball Screw with Ball Cage Low noise Long-term, maintenance free operation Low torque fluctuation DN value 130,000 SBN CATALOG No.273-2E High speed ball screw with caged ball technology SBN Pipe

More information

Metric cam follower bearings

Metric cam follower bearings Metric cam follower bearings Cam follower stude type, standard P. 5-8 Cam follower stude type, heavy load P. 5-10 Cam follower yoke type, standard P. 5-12 Cam follower yoke type, heavy load P. 5-14 Per

More information

Miniature LM Guide RSR and RSR-W

Miniature LM Guide RSR and RSR-W iniature Guide RSR and RSR End plate block rail End seal Ball Greace nipple ig. 1 onstruction of odel RSRV onstruction and eatures Balls roll in two rows of precisionground raceways on an rail and an block.

More information

Early Detection of Tire-Road Friction Coefficient based on Pneumatic Trail Stiffness

Early Detection of Tire-Road Friction Coefficient based on Pneumatic Trail Stiffness 2016 American Control Conerence (ACC) Boston Marriott Copley Place July 6-8, 2016. Boston, MA, USA Early Detection o Tire-Road Friction Coeicient based on Pneumatic Trail Stiness Kyoungseok Han, Eunjae

More information

Instruction Manual for the LM Guide

Instruction Manual for the LM Guide Instruction Manual for the LM Guide 1 Table of Contents 1.Introduction 1 2.Precautions on Using the LM Guide 2 1.Introduction Thank you for purchasing the THK products. This document will explain any precautions

More information

POSI-LOCK. Connects the Shaft and Hub with the Wedging Action of the Tapered Surface. Mechanical Shaft Lock ETP BUSHINGS

POSI-LOCK. Connects the Shaft and Hub with the Wedging Action of the Tapered Surface. Mechanical Shaft Lock ETP BUSHINGS Mechanical Shaft ock POSI-OCK Mechanical Shaft ock POSI-OCK Application Machine tool, pump, molding machine, printing machine, palletizing robot, various jigs and tools Connects the Shaft and Hub with

More information

Cam Follower Bearings

Cam Follower Bearings Cam Follower Bearings RegalPTS.com/McGill McGill Precision Bearings Reduce Operating Cost CAMROL Cam Follower Selection Guide Condition How to identify Potential Solutions General Purpose Applications

More information

DHDB. Free pass possible!

DHDB. Free pass possible! Overview/Configuration/Ordering www.festo.co.kr/amiproduct Horizontal stopper cylinders Piston diameter 50 mm Stroke length 50 mm Lever return force 16N Double-acting Position sensing Flexible cushioning

More information

MTK+ Suffix and prefix overview. Deep groove ball bearings. Self-aligning ball bearings

MTK+ Suffix and prefix overview. Deep groove ball bearings. Self-aligning ball bearings TK+ Suffix and prefix overview uthor Kevin Drake Released by Koen Geeraerts Release date 26 June 2016 Document Id D-833 Version 1.2 Revision date 14 July 2016 Deep groove ball bearings Z Pressed steel

More information

SINGLE ROW FULL COMPLEMENT CYLINDRICAL ROLLER BEARINGS

SINGLE ROW FULL COMPLEMENT CYLINDRICAL ROLLER BEARINGS SINGLE ROW FULL COMPLEMENT CYLINDRICAL ROLLER BEARINGS Design Single row full complement cylindrical roller bearings suit locations with high radial load and lower revolution frequencies, comparing to

More information

BERG AB Тел. (495) , ф. (495) S B L B L Max. [N]

BERG AB Тел. (495) , ф. (495) S B L B L Max. [N] www.thk.ru BERG AB thk@thk.ru Тел. (9)-77--7, ф. (9)-3-3071 Micro-LM Systems Micro-LM Guide RSR-M RSR-M 1 and P R O T O T Y P E Smallest LM Guide worldwide The micro series of RSR type are miniaturized

More information

FAG HYDRAULIC NUTS. FAG OEM und Handel AG

FAG HYDRAULIC NUTS. FAG OEM und Handel AG FAG HYDRAULIC NUTS FAG OEM und Handel AG CONTENTS Application Design Principle Design Variations Pressure Generators, Connection Pieces Dimensional Tables for FAG Hydraulic Nuts (Metric) Dimensional Tables

More information

Bearing Solutions for Printing Machines

Bearing Solutions for Printing Machines Bearing Solutions for Printing Machines Added competence for your success For several decades now, Schaeffler Group Industrial and its INA and FAG brands has specialized in printing machine applications.

More information

Sensor-Bearing Units Steer-By-Wire Modules Mast Height Control units Other sensorized units

Sensor-Bearing Units Steer-By-Wire Modules Mast Height Control units Other sensorized units Mechatronics Sensor-Bearing Units... 957 Steer-By-Wire Modules... 967 Mast Height Control units... 969 Other sensorized units... 971 955 Sensor-Bearing Units SKF Sensor-Bearing Units... 958 SKF Explorer

More information

Cylindrical roller bearings for large electric motors

Cylindrical roller bearings for large electric motors Cylindrical roller bearings for large electric motors Cylindrical roller bearings are typically used in belt or gear driven medium- to largesized electric motors, where heavy radial loads prevail. These

More information

Caged Ball LM Guide Actuator SKR

Caged Ball LM Guide Actuator SKR Caged Ball LM Guide Actuator SKR For details, visit THK at www.thk.com Product information is updated regularly on the THK website. CATALOG No.309-11E Integrated LM Guide and Ball Screw High-rigidity /

More information

9. Lubrication. 9.1 Lubrication amount for the forced lubrication method

9. Lubrication. 9.1 Lubrication amount for the forced lubrication method 9. Lubrication 9.1 Lubrication amount for the forced lubrication method When a rolling bearing runs at high speed, the rolling friction of the bearing itself and the churning of lubricant cause heat generation,

More information

Linear Guideways HG Series

Linear Guideways HG Series 18 G99TE1-67 Linear Guideways 2-1 - Heavy Load Ball Type Linear Guideway HG series linear guideways are designed with load capacity and rigidity higher than other similar products with circular-arc groove

More information

Caged Ball LM Guide SPR / SPS

Caged Ball LM Guide SPR / SPS Caged Ball LM Guide SPR / SPS Adopts 8 Rows of Raceways Achieves Super-Low Waving and Ultra-High Rigidity For details, visit THK at www.thk.com Product information is updated regularly on the THK website.

More information

Overview of Air Bearings and Design Configurations Richard Pultar OPTI521 December 14, 2016

Overview of Air Bearings and Design Configurations Richard Pultar OPTI521 December 14, 2016 Overview of Air Bearings and Design Configurations Richard Pultar OPTI521 December 14, 2016 Introduction Air bearings are a type of bearing that use pressurized air to create an air gap between two surfaces.

More information

Rolling Bearings KLF-ZVL Bearings, s. r. o.

Rolling Bearings KLF-ZVL Bearings, s. r. o. Rolling Bearings KLF-ZVL Bearings, s. r. o. Lidická 667, 258 01 Vlašim tel.: 00420 317 844 485, fax: 00420 317 844167 www. klf-zvl.cz, klf-zvl@klf-zvl.cz Page 3 Double-Row Cylindrical Roller Bearings with

More information

Fuzzy Logic Control of Clutch for Hybrid Vehicle

Fuzzy Logic Control of Clutch for Hybrid Vehicle Fuzzy Logic ontrol o lutch or Hybrid Vehicle Vu Trieu Minh Mechanosystem - Department o Mechatronics Tallinn University o Technology trieu.vu@ttu.ee Abstract This paper provides a design o an automatic

More information

Load Ratings and Life

Load Ratings and Life Cam Follower Load Ratings and Life Life Calculations The L10 (rating) life for any given application and bearing selection can be calculated in terms of millions of revolutions by using the bearing Basic

More information

EFG-DH ac 10/10L/12,5/15

EFG-DH ac 10/10L/12,5/15 EFG-DH ac 10/10L/12,5/15 01.03- Operating instructions G 52001557 12.03 Foreword The present ORIGINAL OPERATING INSTRUCTIONS are designed to provide suicient instruction or the sae operation o the industrial

More information

SKF Cooper split bearings

SKF Cooper split bearings SKF Cooper split bearings The company SKF Cooper is the leading supplier of split roller bearings, providing quality and long lasting products since 1907. Based in the UK, SKF Cooper designs and manufactures

More information

LM Guide Actuator KR. For details, visit THK at CATALOG No E. Product information is updated regularly on the THK website.

LM Guide Actuator KR. For details, visit THK at  CATALOG No E. Product information is updated regularly on the THK website. LM Guide Actuator KR For details, visit THK at www.thk.com Product information is updated regularly on the THK website. CATALOG No.209-10E Integrated LM Guide and all Screw High-rigidity / High-precision

More information

Home at last. The new FNL fl anged bearing housing

Home at last. The new FNL fl anged bearing housing Home at last The new FNL fl anged bearing housing Approved by the family Previously it was blue-green. Yet was seen as the black sheep of the family. Now it s the other way around. FNL offers everything

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 1206 Third edition 2001-11-15 Rolling bearings Needle roller bearings, dimension series 48, 49 and 69 Boundary dimensions and tolerances Roulements Roulements à aiguilles, séries

More information

Trends Regarding Rolling Bearings for Steering Systems

Trends Regarding Rolling Bearings for Steering Systems Trends Regarding Rolling Bearings for Steering Systems M. TANIYAMA * *Automotive Engineering Center, Automotive Bearing Engineering Department Many bearings are used in the columns, gears and pumps of

More information

The contents of this catalogue are the copyright of ESE and may not be reproduced unless permission is granted.

The contents of this catalogue are the copyright of ESE and may not be reproduced unless permission is granted. Copyright ESE 2018 The contents of this catalogue are the copyright of ESE and may not be reproduced unless permission is granted. Cares have been taken in every aspect to ensure the correctness of the

More information

EPT Mounted Bearing Technical Support. Phone: FAX: Mounted Bearing Application Engineering

EPT Mounted Bearing Technical Support. Phone: FAX: Mounted Bearing Application Engineering ENGINEERING EPT Mounted Bearing Technical Support Browning Technical Services Phone: 606-564-2093 FAX: 606-564-2079 Mounted Bearing Application Phone: 219-465-2211 FAX: 219-465-2290 E-mail: browningbearing.eng@emerson-ept.com

More information

ROLLING BEARINGS PRODUCTS AND CONSULTATION.

ROLLING BEARINGS PRODUCTS AND CONSULTATION. ROLLING BEARINGS PRODUCTS AND CONSULTATION. ROLLING BEARINGS LINEAR TECHNOLOGY USE OUR STRENGHTS FOR YOUR SUCCSESS! PRODUCT GROUPS 8-11 ROLLING BEARINGS 6/7 CONTENTS. 12/13 LABORATORY & ANALYSIS 14/15

More information

JPF, BTK-V, MTF, WHF, BLK/WTF, CNF

JPF, BTK-V, MTF, WHF, BLK/WTF, CNF Rolled Models JPF, BTK-V, MTF, WF, BLK/WTF, CNF and BNT Point of Selection Options Model No. Precautions on Use Accessories for Lubrication Mounting Procedure and Maintenance A A B Lead Angle Accuracy

More information

Cage & Needle Roller Assemblies

Cage & Needle Roller Assemblies Cage & Needle Roller Assemblies NSK cage and needle roller assemblies are high-quality products that offer users higher reliability and greater ease of handling and installation. Adaptable to severe operating

More information

Evaluation of changes in traction properties of tyres on selected farming surfaces

Evaluation of changes in traction properties of tyres on selected farming surfaces TEKA. COMMISSION OF MOTOIZATION AN ENEGETICS IN AGICULTUE 2013, Vol. 13, No. 1, 3 8 Evaluation o changes in traction properties o tyres on selected arming suraces Włodzimierz Białczyk, Marek Brennensthul,

More information

Bearing preload. Preload considerations

Bearing preload. Preload considerations Bearing preload There may be some applications where the bearing arrangement needs to be preloaded i.e. requires a negative operating clearance. In applications such as machine tool spindles, automotive

More information

Installation and Operational Instructions for EAS -Compact overload clutch, Type 49_. 4._ Sizes 4 and 5

Installation and Operational Instructions for EAS -Compact overload clutch, Type 49_. 4._ Sizes 4 and 5 Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts. Contents:

More information

Sealed SKF spherical roller bearings for demanding environments

Sealed SKF spherical roller bearings for demanding environments Sealed bearings Page... 18 Page... 32 Sealed SKF spherical roller bearings for demanding environments Sealed SKF spherical roller bearings are designed to fulfil high demands on sealing efficiency and

More information

NSK Standard Ball Screws High Speed SS Series

NSK Standard Ball Screws High Speed SS Series NSK Standard Ball Screws igh Speed SS Series NSK s high speed and low noise ball screws provide high-level performance for drive systems of industrial machines such as those used in manufacturing. standard

More information

FAG Cylindrical Roller Bearings full complement Standards Basic designs Tolerances Bearing clearance

FAG Cylindrical Roller Bearings full complement Standards Basic designs Tolerances Bearing clearance FAG Cylindrical Roller earings full complement FAG Cylindrical Roller earings full complement Standards asic designs Tolerances earing clearance Full complement cylindrical roller bearings are suitable

More information

DETa-1 Collet Holder DTA. DTE Fully applicable. DTB For high-speed cutting, High cost performance. 2mm collapsibility with just one collet!!

DETa-1 Collet Holder DTA. DTE Fully applicable. DTB For high-speed cutting, High cost performance. 2mm collapsibility with just one collet!! HSK-T ing Systems or Turning Mill M/ ETa-1 OET HOER AGE HEA General Purpose ETa-1 ollet Holder Pull collet type OET HOER 2mm collapsibility with just one collet!! Just 6 collets is all it takes to chuck

More information

Linear Guideway. Forniture per l Industria Gelmini S.r.l.

Linear Guideway. Forniture per l Industria Gelmini S.r.l. Linear Guideway Forniture per l Industria Gelmini S.r.l. Sede Via Cerati, 3/A 43126 Parma Tel. 0521.993844 Fax 0521.291688 Filiale Via Tiziano, 11 46040 Z.I. Guidizzolo (MN) Tel. 0376.847123 Fax 0376.840319

More information

Chapter 11 Rolling Contact Bearings

Chapter 11 Rolling Contact Bearings Chapter 11 Rolling Contact Bearings 1 2 Chapter Outline 3 Overview The term rolling bearing is used to describe class of bearing in which the main load is transferred through elements in rolling contact

More information

Sealed FAG Spherical Roller Bearings. The cost-effective and environmentally friendly solution

Sealed FAG Spherical Roller Bearings. The cost-effective and environmentally friendly solution Sealed FAG Spherical Roller Bearings The cost-effective and environmentally friendly solution Application Characteristics Programme Application Continuous casting plants feature a large number of spherical

More information

*複合型/B _*複合型/B /05/25 10:10 ページ 151 Complex Bearings

*複合型/B _*複合型/B /05/25 10:10 ページ 151 Complex Bearings Complex Bearings Complex bearings Complex Bearings complex bearing is comprised of a needle roller bearing of supporting radial load and a thrust bearing for supporting axial load which are assembled integrally.

More information

Crossed Roller Ways. Description of each series and Table of dimensions. Anti-Creep Cage Crossed Roller Way

Crossed Roller Ways. Description of each series and Table of dimensions. Anti-Creep Cage Crossed Roller Way Crossed Roller Ways Description of each series and Table of dimensions Crossed Roller Way Page - to -7 Anti-Creep Cage Crossed Roller Way Page - to - Crossed Roller Way Unit Page - to - In the table of

More information

2-9 RG Series High Rigidity Roller Type Linear Guideway

2-9 RG Series High Rigidity Roller Type Linear Guideway G99TE17-136 2-9 High Rigidity Roller Type Linear Guideway 2-9-1 Advantages and features The new RG series from Hiwin features a roller as the rolling element instead of steel balls. The roller series offers

More information

C-Lube Linear Way MUL Linear Way U MUL LWU

C-Lube Linear Way MUL Linear Way U MUL LWU C-Lube Linear Way Linear Way U 1 16 C-Lube Maintenance Free Series C-Lube Linear Way long term maintenance free supported! The aquamarine end plate is the symbol of maintenance free. Identification umber

More information

TIMKEN SNT SPLIT PLUMMER BLOCKS

TIMKEN SNT SPLIT PLUMMER BLOCKS TIMKEN SNT SPLIT PLUMMER BLOCKS TIMKEN SNT SPLIT PLUMMER BLOCKS 1 TABLE OF CONTENTS INTRODUCTION... 3 TIMKEN SNT SPLIT PLUMMER BLOCKS...4 SEAL OPTIONS AND DESCRIPTIONS...6 SEAL SELECTION AND CONFIGURATION

More information

Rotary Table/Vane Style

Rotary Table/Vane Style Rotary Table/Vane Style Series Size: 1, 3, 7, 20 Table top deflection mm or less High Precision Peripheral table deflection mm or less X Series B Series A 147 Rotary Table Values inside ( ) are for Series

More information

NSK Linear Guides. Roller Guide RA Series. Extended series

NSK Linear Guides. Roller Guide RA Series. Extended series NSK Linear Guides A roller guide series employing advanced analysis technology offers super-high load capacity and rigidity. The RA series includes a complete lineup to handle a wide range of applications.

More information

2-1 HG Series - Heavy Load Ball Type Linear Guideway

2-1 HG Series - Heavy Load Ball Type Linear Guideway 2 G99TE15-114 Linear Guideways 2-1 - Heavy Load Ball Type Linear Guideway HG series linear guideways are designed with load capacity and rigidity higher than other similar products with circular-arc groove

More information

SKF ConCentra roller bearing units. The fast, easy, error-free way to install and remove plummer blocks

SKF ConCentra roller bearing units. The fast, easy, error-free way to install and remove plummer blocks SKF ConCentra roller bearing units The fast, easy, error-free way to install and remove plummer blocks Combine industrial strength with the simplicity of plug and play The current situation To properly

More information

Fixed Points. 7.i

Fixed Points. 7.i Products 7.0 Basic Assemblies 7.1 Trestle Arrangement (Assembly and Scope of Delivery) 7.2 Soundproof Fixed Points 7.3 Procedure for designing of trestle arrangement 7.4 Type tested static for trestle

More information

Ball Rail Systems RE / The Drive & Control Company

Ball Rail Systems RE / The Drive & Control Company Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems

More information

SECTION ZF FRONT AXLE

SECTION ZF FRONT AXLE 04-101.01/ 1 2011JA14 SECTION 04-101.01 6 3 5 1 2 9 1. Upper radius rod 2. Lower radius rod 3. Caliper 4. BRAKE Disk 5. Pneumatic connector 6. Hub 7. steering knuckle 8. Grease Fitting 9. Pneumatic connector

More information

Valve Linkages Models Q455C, Q455D, Q455F

Valve Linkages Models Q455C, Q455D, Q455F Specifications/Instructions Valve Linkages Models Q455C, Q455D, Q455F General Model Q455C / Q455D / Q455F valve linkage series connects the Model MY3000 Control Motor and a control valve. The crank mechanism

More information

ACE LOCK Milling Chucks

ACE LOCK Milling Chucks ACE LOCK Milling Chucks Run-out accuracy: 10 µm/0.0004 at the distance of 100 mm/4.00 from the end of the holder. Milling Chucks Spiral slits are precision-machined with a laser securely hold the cutter

More information

C-Lube Linear Way ML Linear Way L

C-Lube Linear Way ML Linear Way L -Lube Linear ay Linear ay L 3 Aquamarine endplate for identification of -Lube Linear ay Identifi cation number and specifi cation The specifications of series and LLseries are indicated by the identification

More information

LM Actuator GL. Low Cost Simple Actuator LM Assembly Kit Also Available NEW. BERG AB Тел. (495) , ф.

LM Actuator GL. Low Cost Simple Actuator LM Assembly Kit Also Available NEW.  BERG AB Тел. (495) , ф. www.thk.ru BERG AB thk@thk.ru Тел. (9)-727-22-72, ф. (9)-223-3071 NEW LM Actuator GL Low Cost Simple Actuator LM Assembly Kit Also Available CATALOG No. 17-E www.thk.ru BERG AB thk@thk.ru Тел. (9)-727-22-72,

More information

Char-Lynn Hydraulic Motor. Repair Information Series. April, 1997

Char-Lynn Hydraulic Motor. Repair Information Series. April, 1997 Char-Lynn Hydraulic Motor April, 1997 Repair Information Geroler Motors 002 00 004 Parts Drawing 1 See Note 2 Page 1 22 1 9 1-1/4 Split Flange Ports 8 7 6 5 B 1 See Note 2 Page 2 24 4 14 19 20 15 1 18

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION General Nomenclature Spherical Roller Bearings The spherical roller bearing is a combination radial and thrust bearing designed for taking misalignment under load When loads are heavy, alignment of housings

More information

R. S. Impex. https://www.indiamart.com/r-s-impex/

R. S. Impex. https://www.indiamart.com/r-s-impex/ +91-8048602491 R. S. Impex https://www.indiamart.com/r-s-impex/ We R.S. Impex are one of the leading Importers / dealers since two decades of many reputed brand accessories & spares for various machinery.

More information

SKF bearings with solid oil

SKF bearings with solid oil SK bearings with solid oil he third lubrication choice he Power of Knowledge ngineering Authorised distributors for over 40 manufacturers Acorn Industrial Services Ltd Distribution Centres Acorn North

More information

CATALOGUE OF spherical roller and special bearings

CATALOGUE OF spherical roller and special bearings CATALOGUE OF spherical roller and special bearings 2007-01 ZKL, a. s. Contacts: ZKL, a. s. Jedovnická 8 628 00 Brno Czech Republic Phone: +420 544 135 137 E-mail: marketing@zklsales.cz ZKL Bearings CZ,

More information

SECTION 17 SUSPENSION CONTENTS FRONT SUSPENSION REAR SUSPENSION MAINTENANCE SERVICES

SECTION 17 SUSPENSION CONTENTS FRONT SUSPENSION REAR SUSPENSION MAINTENANCE SERVICES SECTION 17 SUSPENSION CONTENTS 17-1. FRONT SUSPENSION...................................... 17-2 17-2. REAR SUSPENSION...................................... 17-15 17-3. MAINTENANCE SERVICES................................

More information

16 Bearing accessories

16 Bearing accessories Rolling bearings 16 Bearing accessories Adapter sleeves... 1270 Designs and variants... 1270 Basic design... 1270 Variants for oil injection... 1270 Variants for CARB toroidal roller bearings... 1273

More information

CAM FOLLOWER BEARINGS

CAM FOLLOWER BEARINGS RD H Ro R W C HD C TL F SD E W1 W Ro HD R CAM FOLLOWER BEARINGS McGill Cam Follower Bearings A century of innovation In 1905 James H. McGill founded what is today McGill Manufacturing Company, a key part

More information

RE / STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles

RE / STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles RE 2 970/.99 STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles STAR Tolerance Rings Product Overview Tolerance rings are made of hard, embossed spring steel strip and belong to the class

More information

High-Speed Precision Bearings

High-Speed Precision Bearings igh-peed Precision Bearings ROBUT eries ROBUT eries was developed using NK s material, evaluation, and analysis technologies to improve the performance of machine tools. Building on the new technologies

More information

AUTO MO TIVE CORPORATION TC 142 PD TRANSFER CASE SERV ICE MAN UAL. Fabco Automotive Corporation,

AUTO MO TIVE CORPORATION TC 142 PD TRANSFER CASE SERV ICE MAN UAL. Fabco Automotive Corporation, AUTO MO TIVE CORPORATION TC 142 PD TRANSFER CASE SERV ICE MAN UAL Fabco Automotive Corporation, TABLE OF CONTENTS SECTION TC-142 PD TRANSFER CASE SERVICE MANUAL Introduction Operation Specification LUBRICATION

More information

Reinforcement Learning of Adaptive Longitudinal Control for Dynamic Collaborative Driving

Reinforcement Learning of Adaptive Longitudinal Control for Dynamic Collaborative Driving Int. J. Vehicle Inormation and Communication Systems, Vol. x, No. x, 28 1 Reinorcement Learning o Adaptive Longitudinal Control or Dynamic Collaborative Driving Luke Ng Department o Mechanical and Mechatronics

More information