CASEMENT. Operator / Stationary Units
|
|
|
- Wendy Sharyl Houston
- 6 years ago
- Views:
Transcription
1 Operator / Stationary Units MO (mm) 1' - 6" (457) 2' - 0" (610) 2' - 6" (762) 3' - 0" (914) RO (mm) 1' - 6" (457) 2' - 0" (610) 2' - 6" (762) 3' - 0" (914) FS (mm) 1' - 5 (445) 1' - 11 (597) 2' - 5 (749) 2' - 11 (902) DLO (mm) 11 53/64" (300) 17 53/64"(453) 23 53/64" (605) 29 53/64" (757) 65 53/64" (1672) 59 53/64" (1519) 53 53/64" (1367) 47 53/64" (1215) 41 53/64" (1062) 35 53/64" (910) 29 53/64" (757) 23 53/64" (605) 17 53/64" (453) Special sized units available within product size matrix. See your Integrity retailer. E = These windows meet National Egress Codes for fire evacuation. Local codes may differ. T = Standard Tempered. GBG available in standard rectangular lite cut, shown above. Other GBG lite cuts shown on page 3. * These units may optionally include a window opening control device tested to ASTM F , which can be released from the inside without the use of a key, tool, special knowledge, or force greater than that required for normal unit operation.
2 INTEGRITY FROM MARVIN ALL ULTREX SERIES 2 Wide Operator / Stationary Units MO (mm) 3' - 0" (914) 4' - 0" (1219) 5' - 0" (1524) 6' - 0" (1829) RO (mm) 3' - 0" (914) 4' - 0" (1219) 5' - 0" (1524) 6' - 0" (1829) FS (mm) 2' - 11 (902) 3' - 11 (1207) 4' - 11 (1511) 5' - 11 (1816) MAXIMUM ROUGH OPENING not to exceed 114" X 78". Maximum up to 6 units wide by 1 unit high. MAXIMUM ROUGH OPENING not to exceed 96" X 96". Maximum up to 5 units wide by 5 units high. Field mull kits are available. Structural mullion reinforcement is required for some assemblies. Please consult your local Integrity from Marvin representative for more information.
3 3 Wide Operator / Stationary Units MO (mm) 4' - 6" (1372) 6' - 0" (1829) 7' - 6" (2286) 9' - 0" (2743) RO (mm) 4' - 6" (1372) 6' - 0" (1829) 7' - 6" (2286) 9' - 0" (2743) FS (mm) 4' - 5 (1359) 5' - 11 (1816) 7' - 5 (2273) 8' - 11 (2731) Special sized units available within product size matrix. See your Integrity retailer. E = These windows meet National Egress Codes for fire evacuation. Local codes may differ. T = Standard Tempered. GBG available in standard Rectangular lite cut, shown above. Other GBG lite cuts shown on page 3. * These units may optionally include a window opening control device tested to ASTM F , which can be released from the inside without the use of a key, tool, special knowledge, or force greater than that required for normal unit operation.
4 INTEGRITY FROM MARVIN ALL ULTREX SERIES 4 Wide Operator / Stationary Units MO (mm) 6' - 0" (1829) 8' - 0" (2438) RO (mm) 6' - 0" (1829) 8' - 0" (2438) FS (mm) 5' - 11 (1816) 7' - 11 (2426) / IFSWP4036 / / IFSWP4040 / / IFSWP4046 / / IFSWP4050 / / IFSWP5050 / / IFSWP5056 / MAXIMUM ROUGH OPENING not to exceed 114" X 78". Maximum up to 6 units wide by 1 unit high. MAXIMUM ROUGH OPENING not to exceed 96" X 96". Maximum up to 5 units wide by 5 units high. Field mull kits are available. Structural mullion reinforcement is required for some assemblies. Please consult your local Integrity from Marvin representative for more information.
5 - Casement Flankers with Picture Center Unit Casement Flankers with Picture Center Unit MO (mm) 8' - 0" (2438) RO (mm) 8' - 0" (2438) FS (mm) 7' - 11 (2426) MO (mm) 9' - 0" (2743) RO (mm) / IFSWP4036 / 9' - 0" (2743) FS (mm) 8' - 11 (2731) 4' /4" (1518) 4' - 5 3/4" (1365) 3' /4" (1213) 3' - 5 3/4" (1060) 5' - 0" (1524) 4' - 6" (1372) 4' - 0" (1219) 3' - 6" (1067) 4' - 11 (1511) 4' - 5 (1359) 3' - 11 (1207) 3' - 5 (1054) / IFSWP4036 / / IFSWP4040 / / IFSWP4046 / / IFSWP4050 / / IFSWP4040 / 5' - 5 3/4" (1670) 4' /4" (1518) 5' - 6" (1676) 5' - 0" (1524) 5' - 5 (1664) 4' - 11 (1511) / IFSWP4046 / / IFSWP4050 / / IFSWP5050 / / IFSWP5056 / Special sized units available within product size matrix. See your Integrity retailer. GBG available in standard Rectangular lite cut, shown above. Other GBG lite cuts shown on page 3. Construction Details MAXIMUM ROUGH OPENING not to exceed 114" X 78". Maximum up to 6 units wide by unit high. MAXIMUM ROUGH OPENING not to exceed 96" X 96". Maximum up to 5 units wide by 5 units high. Field mull kits are available. Structural mullion reinforcement is required for some assemblies. Please consult your local Integrity from Marvin representative for more information. Head Jamb & Sill Transom/Operator Transom/Oper Transom/Oper H
CHAPTER 3 INTEGRITY WOOD ULTREX DOUBLE HUNG
CHAPTER 3 INTEGRITY WOOD ULTREX DOUBLE HUNG Specifications / NFRC Values... 3.2 Egress, Lite and Vent Measurements... 3.3 Egress, Lite and Vent Measurements / Abbreviations... 3.4 Sizing Guidelines / Measurement
CLAD ULTIMATE CASEMENT ROUND TOP
RT21 / RT22 TWO WIDE STANDARD SIZES - OPERATOR AND STATIONARY RO (mm) 2-9 (838) 3-1 (940) 3-5 (1041) 4-1 (1245) 4-5 (1346) 4-9 (1448) 4-11 5/8 (1514) 4-7 5/8 (1413) 4-5 5/8 (1362) 3-11 5/8 (1210) 3-7 5/8
Treehouse Dock Square
Quote #: W3DE33L A Proposal for Window and Door Products prepared for: Shipping Address: GRAND BANKS BUILDING SUPPLY 7 CRAFTS RD GLOUCESTER, MA 01930-2135 RYAN BANKS GRAND BANKS BUILDING SUPPLY 7 CRAFTS
EPICVUE CLAD-WOOD PATIO DOOR SLIDING PATIO DOOR TABLE OF CONTENTS
TABLE OF CONTENTS 1 Right Stationary GENERAL INFORMATION Dimensional Doors EpicVue Sliding Patio Doors may be specified as "dimensional", by adjusting the desired rough opening width or height in 1/16"
Siteline EX Clad Casement Windows Premium Wood
TABLE OF CONTENTS Specifications... 1-2 QuickSpecGuide... 1-4 Elevations:1/4 Scale... 1-6 Casement... 1-9 CasementPicture... 1-23 CasementPicturewithFlankers... 1-29 CasementSectorTop... 1-34 SashGlazingOptions:3
Warranty, Parts & Install Info 1. Series 4600 Double Hung Windows 2. Series 4710 Casement Windows 3. Series 9000 Sliding Patio Door 4
Warranty, Parts & Install Info 1 Series 4600 Double Hung Windows 2 Series 4710 Casement Windows 3 Series 9000 Sliding Patio Door 4 Series 9200 Inswing Doors 5 Series 9300 Outswing Doors 6 Series 9380 Outswing
Technical Data: elevations
Technical Data: elevations Double Hung Unit Elevations Unit Dimension given for primed units only Clad Unit Dimension is identical to Size Masonry Opening: Recommended minimum of Unit or Dimension plus
General Information... Elevation Notes... Lite Cut Information... Standard Lite Cut Tables... Clear Opening Design Tables...
TABLE OF CONTENTS General Information..................................... Elevation Notes......................................... Lite Cut Information..................................... Standard Lite
FG-2000 Storefront - Center Set 1-3/4 x 4 1/2
FG-2000 Storefront - Center Set 1-3/4 x 4 1/2 Table of Contents (Drawing numbers ie H0501 used as CAD detail reference only ) Elev--Fg-2000-Storefront H0501-Horizontal-Outside Glaze H0502-Head-Horizontal
Series 8010 Vinyl Double Hung Windows Visit MGMIndustries.com for a complete online catalog Page
Series 8010 Vinyl Double Hung Windows Visit MGMIndustries.com for a complete online catalog Page 1 Singles 2 Twins 3 Triples 4 Quads 5 Fixed Pictures 6 Half Rounds 7 Transoms 8 Flankers 9 Round Top Pictures
2'-9 1 /4" (845) 2'-7 1 /4" (794) 2'-5 1 /4" (743) 2'-10" (864) 2'-8" (813) 2'-6" (762) 26 5 /8" (676) 24 5 /8" (625) 22 5 /8" (575)
Table of Transom Window Sizes Scale 1 8" (3) = 1'-0" (305) 1:96 Unit Dimension 1'-3 1 /4" 1'-7 1 /4" 2'-9 1 /4" (845) 3'-1 1 /4" (946) 3'-7 1 /4" (1099) 3'-11 1 /4" (1200) Minimum Rough Opening 1'-4" (406)
French View Primed Sliding Patio Doors Premium Wood
TABLE OF CONTENTS Elevations/Sizes:1/4 Scale... 18-2 2-PanelDoors... 18-4 Bi-Parting(4-Panel)Doors... 18-5 GlazingOptions:3 Scale... 18-7 TrimOptions:3 Scale... 18-8 Standard Mullion Options: 3 Scale...
The Falcon Series... Setting The Standard
The Falcon Series... Setting The Standard Product Feature Guide 3/4 Insulated Glass 6100 XJC/A 2100 1100 C/A Clear S S S S S Emax Plus O O O O O Emax Ultra O O O O O Bronze Tint O O O O O Grey Tint O O
Clad Traditional Sliding Patio Doors Premium Wood
TABLE OF CONTENTS Elevations/Sizes: 1/8 Scale 19-2 StationaryPanel-NarrowStile... 19-4 StationaryPanel-WideStile... 19-5 2Panel-NarrowStile... 19-6 2-Panel-WideStile... 19-7 3Panel-NarrowStile... 19-8
Casement Windows Builders Clad-Wood
TABL OF CONTNTS Specifications... 1-2 QuickSpecGuide... 1-3 levations: 1/4 Scale Casement... 1-4 CasementPicture... 1-13 CasementTransom... 1-15 CasementRadius... 1-18 Grille Patterns... 1-20 ClearOpeningandDaylightSpecifications...
Unit Construction. For more information on Unit Construction, visit learn.reeb.com
Unit Construction When a door is needed for remodeling or new construction, door unit configuration and handing are two important aspects that need to be determined. The first configuration decision is
Builders Know The Difference.
Vector Windows, LLC 1020 International Dr. Fergus Falls, MN 56537 Phone 800.739.9899 Fax 888.739.9799 WINDOWS & DOORS VectorWindows.com Builders Know The Difference. Advantage & Diplomat Series Specifications
French View Primed Hinged Patio Doors Premium Wood
TABLE OF CONTENTS Specifications... 12-2 QuickSpecGuide... 12-4 Elevations:1/4 Scale... 12-5 In-SwingDoors... 12-7 CenterHingeDoors... 12-10 Out-SwingDoors... 12-12 GlazingOptions:3 Scale... 12-16 TrimOptions:3
Sliding Patio Doors Flat Casing Vinyl
TABLE OF CONTENTS Specifications... 5-2 QuickSpecGuide... 5-3 Elevations/Sizes: 1/4 Scale 2-PanelSlidingPatioDoors... 5-4 2-PanelSlidingPatioDoorswithTransoms... 5-5 Transoms... 5-7 Sidelights... 5-9 SectionDetails...
Primed Traditional Sliding Patio Doors Premium Wood
TABLE OF CONTENTS Elevations/Sizes: 1/8 Scale StationaryPanel-WideStile... 20-4 2-Panel-WideStile... 20-5 3-Panel-WideStile... 20-6 4-Panel-WideStile... 20-9 Transoms:1/4 Scale... 20-10 GlazingOptions:3
Siteline EX Primed Casement Windows Premium Wood
TABLE OF CONTENT pecifications... 2-2 QuickpecGuide... 2-4 Elevations:1/4 cale... 2-6 Casement... 2-9 CasementPicture... 2-23 CasementPicturewithFlankers... 2-29 CasementectorTop... 2-34 ashglazingoptions:3
Architect Series Traditional
SECTION DIRECTORY Architect Series Traditional Product Selection Guide Size and Performance Data...W-HG-2 STC/OITC...W-HG-2 Features and Options...W-HG-3 Combination Assemblies...W-HG-4 Glazing Performance...W-HG-6
Pella Impervia 350 Series Vinyl Awning Windows and Sliding Patio Doors
Pella Impervia 350 Series Vinyl Awning Windows and Sliding Patio Doors Pella 350 Series premium vinyl windows and patio doors are available in a variety of frame types to help ensure a smooth installation
Specifications... Quick Spec Guide...
TABLE OF CONTENTS Specifications........................................... Quick Spec Guide....................................... Elevations/Sizes: 1/4" Scale Full Awning Units..................................
Series 6000 XT - Thermal Storefront 2 x 6-1 Glass
Series 6000 XT - Thermal Storefront 2 x 6-1 Glass Table of Contents (Drawing numbers ie H9303 used as CAD detail reference only ) Elev-Series-6000 XT-CenterSet H9301-Horizontal H9302-Head H9303-Sill H9319-Horiz-w-Opwin
Rhino series thermally broken 2 3/8" aluminum windows Information book
Gerkin Windows & Doors P.O Box 3203 Sioux City IA. 51102 Phone: (402) 494-6000 (800) 475-5061 Fax: (402) 494-6765 Web site: www.gerkin.com E-Mail: gerkin @gerkin.com Rhino series thermally broken 2 3/8"
Single-Hung Tilt Windows Builders Vinyl
TABL OF CONTNTS Specifications........................................................... 4-2 Quick Spec Guide....................................................... 4-3 levations:/sizes 1/4 Scale Single-Hung
TABLE OF CONTENTS. These three boxes can be changed/resized; whatever works best with the amount of images available to you.
FORGENT SERIES TABLE OF CONTENTS Material & Construction... 4 Complementary Specialty Windows... 26-33 Features & Benefits... 5 Complementary Inswing Doors... 34-39 Casements & Awnings... 6-13 Complementary
BUILDER SERIES MODULAR SIZING SUPPLEMENT BUILDER SERIES Single Hung & Double Hung
BUILDER SERIES W I N D O W S A WHOLE NEW POINT OF VIEW. E A S T Single Hung & Double Hung Modular units are manufactured to traditional wood window rough opening dimensions. BUILDER SERIES 1000 S I Z I
Single-Hung Side Load Windows Builders Vinyl
TABL OF CONTNTS Specifications... 3-2 QuickSpecGuide... 3-3 levations: 1/4 Scale Single-HungSideLoad... 3-4 2-WideSingle-HungSideLoad... 3-14 3-WideSingle-HungSideLoadwithCenterPicturewith24 Flanker...
BROSCO SSB Window Unit
Windows that Fit Northeast Lifestyles. The Northeast's unique architectural styles and harsh climate demand windows that are quality built, energy efficient and fit the charm and character of the traditional
Signature Series. Specialty Windows. Bay / Bow Windows Garden Windows Architectural Windows
Signature Series Specialty indows Bay / Bow indows Garden indows Architectural indows Signature Series Architectural indows Signature Series offers a variety of specialty windows to fit all your architectural
Flexiframe Windows (1985 to Present)
Flexiframe Windows (1985 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Prefinished Flexiframe units were available 1980 to 1985. These units were not assembled or glazed
Clad Radius and Geometric Windows - Direct-Set Custom Wood
PRODUCT SPECIFICATIONS EXTERIOR FINISH Exterior aluminum surfaces are finished with a fluoropolymer (70% Kynar 500 R ) multi-coat finish system to meet the performance standards required by AAMA specification
SIZE AND PERFORMANCE SUMMARY GLAZING PERFORMANCE GRILLE PROFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRODUCT DESCRIPTION CROSS SECTIONS
SECTION DIRECTORY SIZE AND PERFORMANCE SUMMARY GLAZING PERFORMANCE GRILLE PROFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRODUCT DESCRIPTION CROSS SECTIONS The information published in this document
Perma-Shield Gliding Patio Doors
Casement Perma-Shield & Awning Gliding Patio Windows Doors 400 Casement Awning Windows & CUSTOM SIZING! in 1/8 increments. SECTION REFERENCE Table of Basic Unit Sizes 220 Opening Specifications 221 Basic
Visions 2000 Double Hung Tilt Window Parts Reference Catalog
Visions 2000 Double Hung Tilt Window Parts Reference Catalog (Includes Parts and Information for Double Hung Tilt Oriel and Double Hung Tilt Picture) #010636 (Revised 01/03) Weather Shield Mfg., Inc. Medford,
400 Series Flexiframe Windows (1985 to Present)
400 Series Flexiframe Windows (1985 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Prefinished Flexiframe units were available 1980 to 1985. These units were not assembled
Primed Epicr Radius and Geometric Windows - In-Sash Custom Wood
TABLE OF CONTENTS Specifications... 20-2 QuickSpecGuide... 20-4 Elevations/Sizes:1/4 Scale... 20-6 Casement Half Round Units... 20-8 Casement Quarter Round Units... 20-9 Double-Hung Half Round Units...
Euroview Vinyl Tilt/Turn, Hopper & Picture Windows
Unit Features Frame: Frame Thickness: 70mm (2 3/4") Frame Width: 67mm (2 5/8") or 80mm (3 5/32") Steel Reinforced Sash: Sash Thickness: 70mm (2 3/4") Sash Width: 80mm (3 5/32") Steel Reinforced Shape Options:
400 Series Flexiframe Windows (1985 to Present)
400 Series Flexiframe Windows (1985 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Prefinished Flexiframe units were available 1980 to 1985. These units were not assembled
Sliding Windows Brickmould Vinyl
TABL OF CONTNTS Specifications........................................................... 6-2 Quick Spec Guide....................................................... 6-3 levations/sizes: 1/4 Scale 2-Wide
Lifestyle Series Casement
Product Selection Guide Size and Performance Data...LS-CM-2 Features and Options...LS-CM-3 Combination Assemblies...LS-CM-4 Glazing Performance Dual-Pane...LS-CM-8 Triple-Pane... LS-CM-10 Grille Types
S I ZE GU I DE CS = COTTAGE STYLE SASH SINGLE HUNG WINDOW SIZES SIDE LITES / /4 22 1/ / /4 26 1/ /4
64 65 56 57 64 65 48 49 52 53 56 57 40 48 49 5-10 56 68 69 52 53 RED LASS 5-6 68 69 68 56 69 57 76 77 5-6 68 6469 65 RED LASS 76 5-6 7768 69 40 48 49 48 49 SIDE LITES 5-6 68 69 1-2 15 13 14 48 49 SIDELITES
2016 Price Book. Midwest Built. Midwest Tough. Guaranteed for Life.
2016 Price Book Midwest Built. Midwest Tough. Guaranteed for Life. 1 Euro Series Windows & Doors Euro Series Windows Fixed/Picture / $6.80 /Woodgrain $8.45 In-Swing Casement / $9.37 /Woodgrain $10.45 $150/unit
Sliding Windows Builders Vinyl
TABL OF CONTNTS Specifications... 5-2 QuickSpecGuide... 5-3 levations: Scale 2-Wide Sliding Windows... 5-4 3-Wide Sliding Windows... 5-8 Grille Patterns... 5-10 SectionDetails: 6 Scale... 5-11 WallDetails...
StyleGuard IMPACT- When the storm is at its worst, our performance is at its best. RESISTANT WINDOWS DOORS AND
StyleGuard IMPACT- RESISTANT WINDOWS AND DOORS When the storm is at its worst, our performance is at its best. Backed by a Limited Lifetime Warranty YKK AP Stands behind the quality of every StyleGuard
100 Series Awning Windows (2008 to Present)
100 Series Awning Windows (2008 to Present) CCParts Catalog Main Menu Section TOC Search What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration...........................................................
Sliding Patio Doors Builders Vinyl
TABLE OF CONTENTS Specifications... 7-2 QuickSpecGuide... 7-3 Elevations/Sizes: 1/4 Scale 2-Panel... 7-4 3-Panel... 7-5 2-Panel withtransom... 7-6 Sidelite... 7-8 Transom... 7-9 3-PanelTransom... 7-10
DF COLLECTION. Architectural Detail Guide Hybrid Awning Window DF 3113 TABLE OF CONTENTS
TABLE OF CONTENTS Specifications... 1-2 Quick Spec Guide... 1-3 Clear Opening and Daylight Specifications... 1-5 General Information Multiple Assemblies... 1-6 Handing and Operation... 1-7 Elevation Drawing
R. Lang Company SECTION J
ALUMINUM GREENHOUSE WINDOW R. Lang Company RUGGED WELDED FRAME Virtually indestructable, stronger, carries more weight. EASY-OPENING SIDE VENTS Sash balances allow for easy fingertip operation SECURITY
Single-Hung Windows Builders Aluminum
TABL OF CONTNTS Specifications... 1-2 QuickSpecGuide... 1-3 levations: Scale Single-Hung... 1-4 Single-Hung-FloridaSizes... 1-8 Grille Patterns... 1-9 SectionDetails: 6 Scale... 1-10 InstallationWallDetails...
General Information SECTION DIRECTORY
SECTION DIRECTORY General Information Product Summary... V-AW-2 Product Selection Guide... V-AW-3 Size and Performance Data... V-AW-3 Features and Options... V-AW-3 Sound Transmission Class and Outdoor-Indoor
Gliding Windows Premium Vinyl
TABL OF CONTNTS Product Specifications... 6-2 Quick Spec Guide........................................................ 6-3 levations/sizes: 1/4 Scale 2WideGlidingWindow... 6-4 3WideGlidingWindow... 6-8
EPICVUE CLAD-WOOD WINDOW GEOMETRIC - DIRECT SET TABLE OF CONTENTS
EPIVUE LD-WOOD WINDOW TLE OF ONTENTS rchitectural Design Manual 1 EPIVUE LD-WOOD WINDOW GENERL INFORMTION Standard Sizes & Designs EpicVue lad geometric windows are produced one-at-a-time to customer order,
SITELINE WOOD WINDOW GEOMETRIC / DIRECT SET TABLE OF CONTENTS
GEOMETRI / DIRET SET TLE OF ONTENTS rchitectural Design Manual Questions? onsult JELD-WEN customer service. 1 GEOMETRI / DIRET SET GENERL INFORMTION Standard Sizes & Designs Wood geometric windows are
Siteline Clad Swinging Patio Doors Premium Wood
TABLE OF CONTENTS Specifications... 13-2 QuickSpecGuides... 13-6 Single&FrenchDoorHandingandStationaryCallouts... 13-10 Elevations:1/4 Scale... 13-12 SingleSwingIn-SwingandOut-Swing... 13-14 4-PanelSwingIn-SwingandOut-Swing...
Pella 450 Series. Size and performance summary. Glazing performance. Grille profiles and patterns. Size tables. Design Data
SECTION DIRECTORY Pella 450 Series Size and performance summary Glazing performance Grille profiles and patterns Size tables Design Data Detailed Product Description Cross sections The information published
Siteline EX Primed Double-Hung Windows Premium Wood
TABL OF CONTNTS Specifications... 6-2 QuickSpecGuide... 6-4 levations:1/4 Scale... 6-6 Double-Hung... 6-9 Double-Hung Picture... 6-16 Double-Hung Picture with Flankers... 6-26 SectorTop... 6-28 FullRadius...
Siteline EX Clad Double-Hung Windows Premium Wood
TABL OF CONTNTS Specifications... 5-2 QuickSpecGuide... 5-4 levations:1/4 Scale... 5-6 Double-Hung... 5-9 Double-Hung Picture... 5-16 Double-Hung Picture with Flankers... 5-26 SectorTop... 5-28 FullRadius...
Reliance BlastMax Blast Resistant Curtain Wall Wet Glazed
Reliance BlastMax Blast Resistant Curtain Wall Wet Glazed Table of Contents (Drawing numbers ie H9601 used as CAD detail reference only ) Elev-RcwStrMax-Wet-Glz-TwnSpn H9601-Head-at-Vision H9602-Typical-Horizontal
Minimum and Maximums LINCOLN WOOD PRODUCTS, INC.
Minimum and Maximums LINOLN WOOD PRODUTS, IN. asements - Operating Minimum Glass Size of 10 x 12 Maximum Glass Size 32 x 79 Push Out asement Minimum Glass Size of 10 x 16 Push Out asement - Minimum Height
Siteline EX Clad Awning Windows Premium Wood
TABLE OF CONTENT pecifications... 3-2 QuickpecGuide... 3-4 Elevations/izes:cale... 3-6 Awning... 3-8 GlazingOptions:3 cale... 3-19 TrimOptions:3 cale... 3-21 JambOptions:3 cale... 3-20 tandard Mullion
Technical Guide B Casement Windows. Casement Windows. Technical Guide B1
B Technical Guide B Casement Windows Technical Guide B1 Product Features Styles Traditional, Push Out and Mission options. Standard Features Natural, clear Douglas Fir interior (no visible finger joints)
Promotional Materials
1 Promotional Materials CompositWood Architectural Series Windows Architectural Series Windows Engineered to Last... Beautifully A New Generation of Vinyl Windows 3000 N. Township Blvd. Pittston, PA 18640
Size and performance summary. Glazing performance. Grille profiles and patterns. Size tables. Design Data. Detailed Product Description
ncompass by Pella SCTION DIRCTORY SINGL-HUNG Size and performance summary Glazing performance Grille profiles and patterns Size tables Design Data Detailed Product Description Cross sections The information
Intelligent Design. Superior Performance.
by Thermo-Tech Premium Windows and Doors Intelligent Design. Superior Performance. Designed and manufactured to provide cost-saving energy efficiency, exceptional safety and security, and premium comfort
VINYL WINDOWS & EXTERIOR DOORS
u n i t e d c o l l e c t i o n v i n y l w i n d o w s & e x t e r i o r d o o r s VINYL WINDOWS & EXTERIOR DOORS Table of Content Casement & Awning Windows 5 Picture & Speciality Windows 7 Single Hung
Architect Series Traditional
SECTION DIRECTORY Product Selection Guide Size and Performance Data... OSBF-2 Glazing Performance... OSBF-3 Grille Types... OSBF-7 Design Data Vent... OSBF-11 Detailed Product Descriptions... OSBF-14 Unit
SECTION DIRECTORY. Designer Series W-OSD-1 OUT-SWING DOOR
SECTION DIRECTORY Designer Series Product Selection Guide Size and Performance Data... W-OSD-2 Features and Options... W-OSD-4 Combination Assemblies... W-OSD-5 Glazing Performance... W-OSD-6 Grille Types
Product Selection Guide Size and Performance Data...W-HG-2 Features and Options...W-HG-3 Combination Assemblies...W-HG-4 Glazing Performance...
SECTION DIRECTORY Product Selection Guide Size and Performance Data...W-HG-2 Features and Options...W-HG-3 Combination Assemblies...W-HG-4 Glazing Performance...W-HG-6 Grille Types Grille Profiles...W-HG-10
Casement Windows Premium Atlantic Vinyl
TABL OF CONTNTS Specifications... 1-2 QuickSpecGuide... 1-3 levations/sizes: 1/4 Scale FullCasement... 1-4 FullImpactCasement... 1-6 GlazingOptions: 3 Scale... 1-7 Grille Patterns... 1-8 SectionDetails:
Architect Series Traditional. ONE-WAY (PASSAGE-DOOR) Min-Frame- Width-(Inches) Max-Frame- Width-(Inches)
SIZE DIMENSIONS Size-Dimensions NUMBER-OF- PANELS ONE-WAY (NO-PASSAGE-DOOR) ONE-WAY (PASSAGE-DOOR) (NO-PASSAGE-DOOR) (PASSAGE-DOOR) 2-PANEL 31-11/16 87-3/16 3-PANEL 46-1/8 129-3/8 46-15/16 130-3/16 4-PANEL
100 Series Single-Hung Windows (2008 to Present)
100 Series Single-Hung Windows (2008 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration...........................................................
StyleGuard. Impact-Resistant Windows and Doors Edition
StyleGuard Impact-Resistant Windows and Doors 07 Edition Options & Accessories 3 CONTENTS Double-Hung Windows 5 Casement Windows 6 Transom Windows 7 Picture Windows 8 Geometric Windows 9 Arch & Eyebrow
Andersen E-Series Double Outswing Hinged Patio Door Sizes
Andersen E-Series Double Outswing Hinged Patio Door Sizes HPO 4068 APLR,PALR HPO 5068 APLR,PALR HPO 5468 APLR,PALR HPO 6068 APLR,PALR HPO 40610 APLR,PALR HPO 50610 APLR,PALR HPO 54610 APLR,PALR HPO 60610
3948 Townsfair Way, Suite 200 July 2013 Columbus, Ohio Toll Free Website
3948 Townsfair Way, Suite 200 July 2013 Columbus, Ohio 43219 Toll Free 800-746-6686 Website www.simonton.com E-Mail archdetails@simonton.com Product Guide Specification Specifier Notes: This product guide
StormForce Technical Guide Details, Sizing & Specifications
StormForce Technical Guide s, Sizing & Specifications INTRODUCTION Table of Contents Elevate. Every project begins with an innate desire to create something great. Introduction S4 StormForce Series S6
Siteline Clad Sliding Patio Doors Premium Wood
iteline Clad liding Patio Doors TABLE OF CONTENT pecifications... 15-2 QuickpecGuide... 15-6 HandingCodes... 15-10 Elevations/izes:1/4 cale... 15-11 300erieslidingPatioDoor... 15-13 300eriesTransomAlignmentGuide...
size limitations (In inches) Minimum Size Maximum Size modular Sizes (In inches) commodity Sizes (In inches) Performance Results
238 casement window Industry leading casement with design pressures up to +110/-195 PSF, Ogee glazing beads and muntins, standard stainless steel package, multipoint locks and matching sightlines to the
Primed Casement Windows (1932 to 1989)
Primed Casement Windows (1932 to 1989) Parts Catalog Main Menu Section TOC Search What s in This Section Standard and Picture Windows...................................... Page 3 Parts Illustration...........................................................
Primed Casement Windows (1932 to 1989)
Primed Casement Windows (1932 to 1989) Parts Catalog Main Menu Section TOC Search What s in This Section Standard and Picture Windows...................................... Page 3 Parts Illustration...........................................................
7225 Non-Thermal / 8225TL Thermal Windows
EFFECTIVE PRICING MULTIPLIERS / EXAMPLE A1/1 THIS PRICING EXCLUDES 7225/8225 QUICK TRACK PROGRAM QUOTE/DER FM MUST BE USED AND SENT TO ESTIMATING/PROJECT MANAGEMENT PRICING MULTIPLIERS / INFMATION ALL
4 0 0 S E R I E S S E R I E S A R C H I T E C T U R A L PRODUCT GUIDE FOR PROFESSIONALS
4 0 0 S E R I E S 2 0 0 S E R I E S A R C H I T E C T U R A L 2011-12 PRODUCT GUIDE FOR PROFESSIONALS 400 Series Casement & Awning Windows SECTION REFERENCE Alignment Grid...38 39 Tables of Sizes...40
Clad Epicr Out-Swing Patio Doors Custom Wood
Clad Epicr Out-wing Patio Doors TABLE OF CONTENT pecifications... 20-2 QuickpecGuide... 20-3 Elevations:1/4 cale... 20-5 1-PanelUnits... 20-7 2-PanelUnits... 20-8 GlazingOptions... 20-9 TrimOptions...
SECTION DIRECTORY. Designer Series DS-AW-1 AWNING
SECTION DIRECTORY Designer Series Product Selection Guide Size and Performance Data... DS-AW-2 Features and Options... DS-AW-3 Combination Assemblies... DS-AW-4 Glazing Performance... DS-AW-5 Grille Types
Double Hung Windows F E A T U R E S O P T I O N S. Primed Wood Double Hungs Single Units (cont. on pg. 6)
Hung F E A T U E Windows DHCT-28 DHCT-30 DHCT-34 DHCT-38 DHT-18 DHT-20 DHT-24 DHT-28 DHT-30 DHT-34 DHT-38 DH18210 DH20210 DH24210 DH28210 DH30210 DH34210 DH38210 DH1832 DH2432 DH2832 DH3032 DH3432 DH3832
100 Series Awning Windows (2008 to Present)
100 Series Awning Windows (2008 to Present) CCParts Catalog Main Menu Section TOC Search What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration...........................................................
100 Series Awning Windows (2008 to Present)
100 Series Awning Windows (2008 to Present) CCParts Catalog Main Menu Section TOC Search What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration...........................................................
SIZE AND PERFORMANCE SUMMARY GLAZING PERFORMANCE GRILLE PROFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRODUCT DESCRIPTION CROSS SECTIONS
SCTION DIRCTORY SIZ AND PRFORMANC SUMMARY GLAZING PRFORMANC GRILL PROFILS AND PATTRNS SIZ TABLS DSIGN DATA DTAILD PRODUCT DSCRIPTION CROSS SCTIONS The information published in this document is believed
Size and performance summary. Glazing performance. Grille profiles and patterns. Size tables. Design Data. Detailed Product Description
SCTION DIRCTORY Size and performance summary Glazing performance Grille profiles and patterns Size tables Design Data Detailed Product Description Cross sections The information published in this document
ALUMINUM HORIZONTAL ROLLER WINDOW
ALUMINUM HORIZONTAL ROLLER WINDOW Series HR610 Monolithic glazing does not provide hurricane protection. Specifications: Window members are extruded from a minimum of 6063-T5 aluminum alloy Frame members
Awning window standard sizes
Awning window standard sizes 666 786 906 1026 1146 1266 1506 1626 1866 2226 66 2706 STUD OPENING REVEALED ALUMINIUM 630 750 870 990 1110 1230 1470 1590 1830 2190 30 2670 STUD OPENING OTHER MATERIALS 610
100 Series Gliding Doors (2009 to Present)
100 Series Gliding Doors (2009 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section 2-Panel.......................................................... Page 3 Parts Illustration...........................................................
E3 Architecture WINDERMERE PROJECT TECHNICAL GUIDE J SWINGING TERRACE & FRENCH TERRACE DOORS
E3 Architecture WINDERMERE PROJECT TECHNICAL GUIDE J SWINGING TERRACE & FRENCH TERRACE DOORS PRODUCT FEATURES SPECIFICATIONS STYLES Traditional, French, Camber Top, Quarter Round and Full Radius options.
SIZE AND PERFORMANCE SUMMARY GLAZING PERFORMANCE GRILLE PROFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRODUCT DESCRIPTION CROSS SECTIONS
SECTIN DIRECTRY SIZE AND PERFRMANCE SUMMARY GLAZING PERFRMANCE GRILLE PRFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRDUCT DESCRIPTIN CRSS SECTINS The information published in this document is
SITELINE WOOD CLAD-WOOD WINDOW GEOMETRIC / DIRECT SET TABLE OF CONTENTS
LD-WOOD WINDOW GEOMETRI / DIRET SET TLE OF ONTENTS rchitectural Design Manual Questions? onsult JELD-WEN customer service. 1 LD-WOOD WINDOW GEOMETRI / DIRET SET GENERL INFORMTION Standard Sizes & Designs
SIZE AND PERFORMANCE SUMMARY GLAZING PERFORMANCE GRILLE PROFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRODUCT DESCRIPTION CROSS SECTIONS
SCTON DRCTORY SZ AND PRFORMANC SUMMARY GLAZNG PRFORMANC GRLL PROFLS AND PATTRNS SZ TABLS DSGN DATA DTALD PRODUCT DSCRPTON CROSS SCTONS The information published in this document is believed to be accurate
DOORS TABBED PAGE DOORS
DOORS TABBED PAGE Index Page Aluminum............................... 21 Closet Doors................................ 4, 5, 13-19 French Doors............................... 11 Hollow Core................................
Clad Gliding Patio Doors Custom Wood
TABLE OF CONTENT pecifications... 29-2 QuickpecGuide... 29-4 Elevations/izes:cale... 29-6 NarrowtileUnits... 29-8 WidetileUnits... 29-12 GlazingOptions... 29-16 TrimOptions... 29-19 Rail&PanelOptions...