FG-2000 Storefront - Center Set 1-3/4 x 4 1/2
|
|
|
- Barbara Long
- 6 years ago
- Views:
Transcription
1 FG-2000 Storefront - Center Set 1-3/4 x 4 1/2 Table of Contents (Drawing numbers ie H0501 used as CAD detail reference only ) Elev--Fg-2000-Storefront H0501-Horizontal-Outside Glaze H0502-Head-Horizontal H0506-Stacked-Horizontal-Out Glaze H0507-Stacked-Head H0508-Stacked-Sill-Outside Glaze H0509-Sill-Outside Glaze-Subsill H0511-Head-w-(1) Pc Receptor H0512-Head-w-(2) Pc Receptor H0514-Horiz-Inside Glaze H0515-Head-Inside Glaze H0516-Sill-Inside Glaze H0541-Horiz Sidelite Base H0543-Sill Sidelite Base H4748-Glass Options H0550-Subsill Splice - End Dam H0555-Horizontal-w-Operable Window V0501-Jamb V0502-Jamb-Screw Spline V0503-Intermediate-Mull-Tube V0504-Intermediate-Mull V0505-Heavy-Mull V0506-Intermediate-Mull-Screw Spline V0507-Expansion-Mullion V0508-Adjustable-Mullion V Corner V Corner V Way Corner Post V Post
2 February OLDCASTLE ( ) Elev-Fg2000-Storefront- H0502 H ISC V0509 V ISC 135 OSC V0509 V OSC 180 DEG POST V WAY CORNER POST V0514 HEAD RECEPTOR H0511 H0512 V0501 V0504 V0501 V0504 H0501 H0514 JAMB V0502 V0505 V0506 V0507 HEAVY MULL SCR SPL OPTION EXPANSION H0509 H0516 V0508 ADJUSTABLE H0541 H0555 GLASS H4748 OPTIONS END H0550 DAM OUTSIDE GLAZED END H0550 DAM INSIDE GLAZED H0507 OPTIONAL DETAILS TUBULAR V0503 VERTICAL V0501 SIDELIGHT BASE H0543 MODEL: ELEV-STOREFRONT-FG2-CENTER SET FG /4" x FLUSH GLAZE -w- H0506 STACK ASSEMBLY H0508
3 February OLDCASTLE ( ) H0501-Horiz-Outglz.- BOTH SIDES FG-2106 AC SHEAR BLOCK AT TUBULAR MULLS FG /4" FG-1136 ROLL PIN FG-1000-FP-1 WATER DIVERTER SET IN SEALANT FG Storefront - Intermediate Horizontal H0501
4 February OLDCASTLE ( ) H0502-Head-Horizontal- BACKER ROD & C SHIM AS REQ'D L ANCHOR BOLT SEALANT D.L.O. 1 3/4" AC SHEAR BLOCK AT TUBULAR MULLS FG-2103 FG-2122 ALUM FILLER 4" LONG AT ANCHORS FG-2188 VINYL FILLER RUNS BETWEEN ALUM FILLER FG Storefront - Head Horizontal H0502
5 February OLDCASTLE ( ) H0506-Stacked-Horiz-Outglz- D.L.O. SEAL AT MULLION & FG-2106 FG-2106 FG-2152 AC SHEAR BLOCK AT TUBULAR MULLS 1 3/4" SEAL BETWEEN SHEAR BLOCK AND HORIZONTAL FG-2102 SEAL BETWEEN MULL AND INSIDE OF HORIZONTAL D.L.O. SEAL AT MULLION FG-1000-FP-1 WATER DIVERTER SET IN SEALANT FG Storefront - Intermediate Horizontal H0506
6 February OLDCASTLE ( ) H0507-Stacked-Head- BACKER ROD & SEALANT SHIM AS REQ'D ANCHOR BOLT CAP SEALED FG /4" 3/4" TOP OF MULLION FG-2159 D.L.O. SEAL AT HORIZONTAL JOINTS AND CONTINOUS SEAL ALONG EDGE OF FG-2159 AC TWIST IN ANCHOR FITS INTO VERTICAL FG Storefront - Head Horizontal H0507
7 February OLDCASTLE ( ) H0508-Stacked-Sill-Outglz- D.L.O. SEAL BETWEEN MULLION AND FG-2106 FG-2106 FG-2115 SEAL BETWEEN MULLION AND FG /4" CONT SEAL FG-1136 CONT SEAL FG /4" DIA WEEPS AT CENTERLINE OF MULLIONS BACKER ROD / SEALANT & SHIMS C L ANCHOR BOLT FG Storefront -Sill Horizontal H0508
8 February OLDCASTLE ( ) H0509-Sill-Outglz- D.L.O. FG-2106 FG-2105 CONT SEAL 1 3/4" FG-1136 AC SHEAR BLOCK AT TUBULAR MULLS COSMETIC SEAL ANCHOR BOLT FG-2169 CAP SEALED BACKER ROD AND SEALANT FG-2000-FP-3 ANCHOR 1/2" TO 3/4" WEEP REQUIRED ON SEALANT AT CENTERLINE OF MULLIONS FG Storefront - Sill Horizontal H0509 SEAL LENGTH OF SUB SILL
9 February OLDCASTLE ( ) H0511-Head-w-(1)Pc-Receptor- BACKER ROD & C L ANCHOR BOLT SHIM AS REQ'D SEALANT D.L.O. 1 3/4" 1/2" FG-2139 FG-2103 AC SHEAR BLOCK AT TUBULAR MULLS FG Storefront - Head Horizontal H0511
10 February OLDCASTLE ( ) H0512-Head-w-(2)Pc-Receptor- BACKER ROD & C L ANCHOR BOLT SHIM AS REQ'D SEALANT D.L.O. 1 3/4" 1" MO-244 FG-2103 AC SHEAR BLOCK AT TUBULAR MULLS MO-243 2" FG Standard Storefront - Head Horizontal H0512
11 D.L.O. FG-2104 FG /4" FG-2106 D.L.O. AC SHEAR BLOCK AT TUBULAR MULLS FG Storefront - Intermediate Horizontal H0514 February OLDCASTLE ( ) H0514-Horiz-InsideGlz-
12 February OLDCASTLE ( ) H0515-Head-InsideGlz- BACKER ROD & C SHIM AS REQ'D L ANCHOR BOLT SEALANT D.L.O. 1 3/4" FG-2105 FG-2106 FG-2122 ALUM FILLER 4" LONG AT ANCHORS FG-2188 VINYL FILLER RUNS BETWEEN ALUM FILLER FG Storefront - Head Horizontal H0515
13 February OLDCASTLE ( ) H0516-Sill-InsideGlz- D.L.O. FG-2103 CONT.SEAL 1 3/4" FG-2183 COSMETIC SEAL OPTIONAL CONT. SEAL EXCEPT FOR 1/2" -3/4" SPACE UNDER MULL FOR WEEPS FG-2180 SHIM AT LOW SPOTS ONLY SEAL ALONG LENGTH OF SUB SILL FG Storefront - Sill Horizontal H0516 ANCHOR BOLT CAP SEALED FG-2000-FP-1 ANCHOR
14 February OLDCASTLE ( ) H0541-Horiz-Sdlt-Base- D.L.O. FG-2106 FG-2106 CONTINOUS SEAL ALONG AND AT ENDS OF FG /8" FG-1136 ACCESS HOLE FG-3320 SIDELITE BASE FG-2215 SHEAR BLOCK AT TUBULAR MULLS FG-1000 FP-2 WATER DIVERTER SET IN SEALANT FG-2102 D.L.O. FG Storefront - Sdlite Base Horizontal H0541
15 D.L.O. FG-2106 FG-1136 CONTINOUS SEAL ALONG AND AT ENDS OF FG /4" DIA WEEP HOLES (2) PER LITE FG /4" DIA WEEP HOLES (2) PER LITE ACCESS HOLE FG-3320 SIDELITE BASE FG-2215 SHEAR BLOCK AT TUBULAR MULLS FG-1000 FP-2 WATER DIVERTER SET IN SEALANT SEAL CONT. FG-2000-FP-3 ANCHOR FG-2169 SHIM AT LOW SPOTS ONLY 1/2" COSMETIC SEAL OPTIONAL CONT. SEAL EXCEPT FOR 1/2" -3/4" SPACE UNDER MULL FOR WEEPS ANCHOR BOLT SEAL ALONG LENGTH CAP SEALED OF SUB SILL FG Storefront - Sidelite Base Sill H0543 February OLDCASTLE ( ) H0543-Sill-Sdlt-Base-
16 February OLDCASTLE ( ) H0550-SubSill-Splice-EndDam- FG-2000-FP-2 FG-2000-FP-9 FG-2000-FP-8 FG-2180 FG-2000-FP-4 Splice FG-2000-FP-7 End Dam FG-2169 FG-2000 Storefront Sub Sill Splice & End Dam - H0550 Note: Ref installation manual for additional splice & end dam info.
17 AC SHEAR BLOCK USAGE DETERMINED BY VERTICAL REQUIREMENT FG-2106 FG /4" FG /8" ROLL PIN FG-1123 POCKET FILLER Operable Window (go to for the most current details and vent options FG Storefront - Intermediate Horizontal H0555 February OLDCASTLE ( ) H0555-Horiz-w-Oper-Window.-
18 BOTH SIDES 5/16" 1/4" 3/8" FG-1134 FG-1134 BOTH SIDES FG-1190 SET IN SILICONE SEALANT FG-1123 SET IN SILICONE SEALANT POCKET FILLERS FG /4" 5/16" 3/8" BOTH SIDES FG-1134 BOTH SIDES FG-1000-FG-2000 Storefront- Center Set Glass Options - H4748 February OLDCASTLE ( ) H4748-Glass-Options-
19 February OLDCASTLE ( ) V0501-Jamb-Typical- FG-2122 ALUM FILLER 4" LONG AT ANCHORS SHIM C ANCHOR BOLT L FG-2188 VINYL FILLER RUNS BETWEEN ALUM FILLER ANCHOR ACCESS HOLE BACKER ROD & SEALANT FG-2100 FS-8 #14 X 1" ASSEMBLY SCREW 1 3/4" FG Storefront - Jamb Mullion V0501
20 February OLDCASTLE ( ) V0502-Jamb-Option- FG-2122 ALUM FILLER 4" LONG AT ANCHORS FG-2188 VINYL FILLER RUNS BETWEEN ALUM FILLER C ANCHOR BOLT L ANCHOR ACCESS HOLE BACKER ROD & SEALANT FG-2103 FS-8 #14 X 1" ASSEMBLY SCREW 1 3/4" FG Storefront - Jamb Mullion V0502
21 FG-2107 SEE HORIZONTAL DETAILS FOR APPROPRIATE HORIZONTAL ATTACHMENT CLIPS RS-1 DETERMINED BY STRUCT REQUIREMENTS 1 3/4" FG Storefront - Vertical Mullion V0503 February OLDCASTLE ( ) V0503-Vertical-Stacked-
22 February OLDCASTLE ( ) V0504-Vertical-Typical- FG-2102 FS-8 #14 X 1" ASSEMBLY SCREW FG-2100 BOTH SIDES RS-1 DETERMINED BY STRUCT REQUIREMENTS 1 3/4" FG Storefront - Vertical Mullion V0504
23 FG-2102 FG-2101 FS-8 #14 X 1" ASSEMBLY SCREW RS-1 DETERMINED BY STRUCT REQUIREMENTS 1 3/4" FG Storefront - Vertical Mullion V0505 February OLDCASTLE ( ) V0505-Vertical-Heavy-
24 FG-2102 FG-2103 FS-8 #14 X 1" ASSEMBLY SCREW RS-1 DETERMINED BY STRUCT REQUIREMENTS 1 3/4" FG Storefront - Vertical Mullion V0506 February OLDCASTLE ( ) V0506-Vertical-Option-
25 FG-2108 FG-2109 FS-8 #14 X 1" ASSEMBLY SCREW 1 3/4" FG Storefront - Expansion Mullion V0507 February OLDCASTLE ( ) V0507-Expansion-Vertical-
26 February OLDCASTLE ( ) V0508-Adjustable-Vertical- FG-2155 FG-2154 FS-8 #14 X 1" ASSEMBLY SCREW FG Storefront - Adjustable Mullion 2 Deg - 12 Deg -V0508
27 February OLDCASTLE ( ) V Corner- FG-2140 FG-2138 Note: Rotate detail 180 deg. at inside corner. 2 3/8" FG Storefront Outside Corner V0509
28 FG-2111 FG-2112 Note: Rotate detail 180 deg. at inside corner. FG Storefront - 90 Outside Corner V0511 February OLDCASTLE ( ) V Corner-
29 FS-8 #14 X 1" ASSEMBLY SCREW FG-2110 FG-2111 FG Storefront - 3 Way Corner V0514 February OLDCASTLE ( ) V way-Corner-
30 FG-2110 FS-8 #14 X 1" ASSEMBLY SCREW FG-2110 FG Storefront Post V0515 February OLDCASTLE ( ) V Post-
Series 6000 XT - Thermal Storefront 2 x 6-1 Glass
Series 6000 XT - Thermal Storefront 2 x 6-1 Glass Table of Contents (Drawing numbers ie H9303 used as CAD detail reference only ) Elev-Series-6000 XT-CenterSet H9301-Horizontal H9302-Head H9303-Sill H9319-Horiz-w-Opwin
803 Airport Rd Terrell, TX (972) HP THERMAL CLIP STOREFRONT - 1 3/4 x 5 1/4-1/4 SYSTEM
803 Airport Rd Terrell, TX 75160 (972) 551-6100 HP-175 - THERMAL CLIP STOREFRONT - 1 3/4 x 5 1/4-1/4 SYSTEM Table of Contents (Drawing numbers ie V2421 used as CAD detail reference only ) ELEV-HP175x525-25in
803 Airport Rd Terrell, TX (972) HP THERMAL CLIP STOREFRONT - 1 3/4 x 4 1/2-1/4 SYSTEM
803 Airport Rd Terrell, TX 75160 (972) 551-6100 HP-175 - THERMAL CLIP STOREFRONT - 1 3/4 x 4 1/2-1/4 SYSTEM Table of Contents (Drawing numbers ie V2401 used as CAD detail reference only ) ELEV-HP175x450-25in
803 Airport Rd Terrell, TX (972) HP THERMAL CLIP STOREFRONT - 1 3/4 x 6-1/4 SYSTEM
803 Airport Rd Terrell, TX 75160 (972) 551-6100 HP-175 - THERMAL CLIP STOREFRONT - 1 3/4 x 6-1/4 SYSTEM Table of Contents (Drawing numbers ie V2441 used as CAD detail reference only ) ELEV-HP175x600-25in
Reliance BlastMax Blast Resistant Curtain Wall Wet Glazed
Reliance BlastMax Blast Resistant Curtain Wall Wet Glazed Table of Contents (Drawing numbers ie H9601 used as CAD detail reference only ) Elev-RcwStrMax-Wet-Glz-TwnSpn H9601-Head-at-Vision H9602-Typical-Horizontal
Flush Glaze-and Multiplane Frames. Standard Doors with. Fg Flush Glaze -1 3/4 x 4 1/2 Fg Flush Glaze -2 x 4 1/2
Standard Doors with Flush Glaze-and Multiplane Frames Fg-000 - Flush Glaze - / x Fg-000 - Flush Glaze - / x / Fg-000 - Flush Glaze - x / --OLDCASTLE (-) www.oldcastlebe.com p-fg-drfrm-sglact FG-000 - &
CASEMENT. Operator / Stationary Units
Operator / Stationary Units MO (mm) 1' - 6" (457) 2' - 0" (610) 2' - 6" (762) 3' - 0" (914) RO (mm) 1' - 6" (457) 2' - 0" (610) 2' - 6" (762) 3' - 0" (914) FS (mm) 1' - 5 (445) 1' - 11 (597) 2' - 5 (749)
82" RO 81 1/4" FD 3/8" MIN JOINT 75 5/8" DLO 2 13/16" SERIES 8200 HORIZONTAL SLIDING WINDOW ELEVATION - BLOCK INSTALL 82" RO 81 1/4" FD
800 SERIES SPECIFICATIONS WINDOWS The Series 800 Horizontal sliding Window offers that rare combination of smooth operation, durability, and toughness. It has a 4-/" (4) deep frame designed to match typical
General Information... Elevation Notes... Lite Cut Information... Standard Lite Cut Tables... Clear Opening Design Tables...
TABLE OF CONTENTS General Information..................................... Elevation Notes......................................... Lite Cut Information..................................... Standard Lite
Rhino series thermally broken 2 3/8" aluminum windows Information book
Gerkin Windows & Doors P.O Box 3203 Sioux City IA. 51102 Phone: (402) 494-6000 (800) 475-5061 Fax: (402) 494-6765 Web site: www.gerkin.com E-Mail: gerkin @gerkin.com Rhino series thermally broken 2 3/8"
CRL PREMIUM SERIES BALANCED DOOR
C.R.LAURENCE CO. ARCHITECTURAL PRODUCTS ISO9000 COMP AN Y BUILDING GLASS RAILING SYSTEMS SAFER STRONGER WITH BRILLIANT TRANSPARENCY BALANCED OR ALUMINUM CLAD WITH EXPOSED SHAFT AND POWER OPERATORS Revisions
CRL PREMIUM SERIES BALANCED DOOR
C.R.LAURENCE CO. ARCHITECTURAL PRODUCTS CE RT F I E D ISO9000 COMP AN Y BUILDING GLASS RAILING SYSTEMS SAFER STRONGER WITH BRILLIANT TRANSPARENCY I BALANCED OR ALUMINUM RAIL & STILE WITH EXPOSED SHAFT
24" DLO 24" DLO 1 1/2" 1 1/2" 1 1/2" 1 1/2" 1 1/2" " FRAME DIMENSION 34" DAYLITE OPENING 1/8" 85 1/2" FRAME DIMENSION 3 OPP 3.
SERIES 87-AR SINGLE AND DOUBLE BUTT HINGE HUNG DOORS W/ & W/O SIDELITE(S), W/ & W/O TRANSOM SHOWN WITH OPTIONAL CRL WOOD FLUSH DOOR SYSTEM DESIGNED TO WRAP -7/8" ( MM) WALLS DESIGNED FOR TOP LOAD GASKETS
sliding storefront systems
sliding storefront systems Table of Contents Sliding Storefront Systems (F) Sliding Storefront Systems (F) Table of Contents MS-360 Mall Slider Pricing Example page 2 MS-360 Mall Slider page 4 PW-180 Phantom
U.S. ALUMINUM 3025 SERIES SLIDING DOORS
U.S. ALUMINUM 3025 SERIES SLIDING S 83 83 1/8" 40" 72" 71 1.1 1.5 1.3 1.7 1.8 1.9 (BEYOND) TESTED TO AAMA LC25 ACCOMODATES 1" (25mm) AND 1 (32mm) GLAZING OPTIONAL THERMALLY BROKEN HEAD AND JAMB CHANNELS
SUN CONTROL. Architectural Products C9-1 SUN CONTROL CLEAR STORY SUN SHADES & LIGHT SHELVES C9-7 C9-11 C9-2. Catalog Page Number C9-5 C9-9
& LIGHT SHELVES C9- C9-7 C9- Catalog Page Number C9-5 C9-9 Sunshades... C9- thru C9-6 Interior Light Shelves... C9-7 thru C9-9 C9-3 C9-7 C9-7 C9-5 C9-8 C9-8 SCALE: N.T.S. C9- WAUSAU 008 Extruded Sunshades
LTS31 AW OVERVIEW. Configurations: These systems can accommodate up to 5 panel per unit.
0 OVERVIEW TECHNICAL INFORMATION Profiles: Profiles are manufactured from 6063-T5 extruded aluminum with a wall thickness of up to /8 allowing for oversized panels. The door systems are available with
Rolling & Wardrobe Doors
Rolling & Wardrobe Doors For over 50 years the Stylmark rolling door has been recognized as the finest in the industry. These doors move effortlessly at the touch of a finger, while adding security to
French View Primed Hinged Patio Doors Premium Wood
TABLE OF CONTENTS Specifications... 12-2 QuickSpecGuide... 12-4 Elevations:1/4 Scale... 12-5 In-SwingDoors... 12-7 CenterHingeDoors... 12-10 Out-SwingDoors... 12-12 GlazingOptions:3 Scale... 12-16 TrimOptions:3
CONSTRUCTION CONSULTING LABORATORY, INTERNATIONAL
TEST REPORT: SERIES 8220 ALUMINUM SINGLE HUNG WINDOW Prepared for: 5625 E. Firestone Boulevard South Gate, CA 90280 1601 Luna Road S-UNITED, INC. Office: (972) 242-0556 Carrollton, Texas 75006 A Quality
5820 / 5920 SERIES DOOR
5820 / 5920 SERIES DOOR Center Glazed Offset Glazed Side Load Top Load WALL-SLIDING PATIO DOOR SYSTEM Montauk, NY Bates Masi Architects MULTIPLE CONFIGURATIONS AVAILABLE X X X Multi Panel Thermal Non-Thermal
French View Primed Sliding Patio Doors Premium Wood
TABLE OF CONTENTS Elevations/Sizes:1/4 Scale... 18-2 2-PanelDoors... 18-4 Bi-Parting(4-Panel)Doors... 18-5 GlazingOptions:3 Scale... 18-7 TrimOptions:3 Scale... 18-8 Standard Mullion Options: 3 Scale...
Flexiframe Windows (1985 to Present)
Flexiframe Windows (1985 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Prefinished Flexiframe units were available 1980 to 1985. These units were not assembled or glazed
Warranty, Parts & Install Info 1. Series 4600 Double Hung Windows 2. Series 4710 Casement Windows 3. Series 9000 Sliding Patio Door 4
Warranty, Parts & Install Info 1 Series 4600 Double Hung Windows 2 Series 4710 Casement Windows 3 Series 9000 Sliding Patio Door 4 Series 9200 Inswing Doors 5 Series 9300 Outswing Doors 6 Series 9380 Outswing
400 Series Flexiframe Windows (1985 to Present)
400 Series Flexiframe Windows (1985 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Prefinished Flexiframe units were available 1980 to 1985. These units were not assembled
TS19 AA OVERVIEW. Glazing: Weight: Each panel weighs approximately 7to 8 lbs per sq ft depending on overall panel size.
0 TS9 AA OVERVIEW TECHNICAL INFORMATION The Panda TB Lift and Slide door system is custom made to order and has been designed specifically for use in climates where thermal insulation and U-factor is of
MAX 50mm Pocket Glazed Commercial Door
1 TM MAX 50mm Pocket Glazed Commercial Door 181 EDGE Architectural Glazing Systems: MAX Technical Manual, January 2015 181 C9700 DG Plain Stile 2 C9706 Wide DG Plain Stile C9712 mm DG Rail mm Sliding Head/Jamb
DF COLLECTION. Architectural Detail Guide Hybrid Awning Window DF 3113 TABLE OF CONTENTS
TABLE OF CONTENTS Specifications... 1-2 Quick Spec Guide... 1-3 Clear Opening and Daylight Specifications... 1-5 General Information Multiple Assemblies... 1-6 Handing and Operation... 1-7 Elevation Drawing
Aluminum Wood Double-Hung Windows
Replacement Parts Table of Contents Exploded View... 38 Parts List... 39 Liners and Stops... 40 --- 41 Picture Glass Bead and Cutting Schedule... 41 Picture Glass... 42 --- 43 Sash Assembly... 44 --- 47
R. Lang Company SECTION J
ALUMINUM GREENHOUSE WINDOW R. Lang Company RUGGED WELDED FRAME Virtually indestructable, stronger, carries more weight. EASY-OPENING SIDE VENTS Sash balances allow for easy fingertip operation SECURITY
Visions 2000 Double Hung Tilt Window Parts Reference Catalog
Visions 2000 Double Hung Tilt Window Parts Reference Catalog (Includes Parts and Information for Double Hung Tilt Oriel and Double Hung Tilt Picture) #010636 (Revised 01/03) Weather Shield Mfg., Inc. Medford,
100 Series Gliding Windows (2008 to Present)
100 Series Gliding Windows (2008 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration...........................................................
100 Series Single-Hung Windows (2008 to Present)
100 Series Single-Hung Windows (2008 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration...........................................................
THERMALSTEEL WINDOWS & DOORS STRENGTH STYLE PERFORMANCE
THERMALSTEEL WINDOWS & DOORS STRENGTH STYLE PERFORMANCE 1 Slender lines and minimal profiles give a lightness to our Thermal Steel Windows and Doors, creating a minimalist aesthetic and powerful architectural
SLIDING GLASS DOOR - NON-IMPACT
SLIDING - GENERAL NOTES: 1. THE PRODUCT SHOWN HEREIN IS DESIGNED AND MANUFACTURED TO COMPLY WITH THE FLORIDA UILDING CODE (FC), CURRENT EDITION. 2. GLAZING OPTIONS: (SEE ) 100 SW TH AVE. 3. APPROVED CONFIGURATIONS
Unit Construction. For more information on Unit Construction, visit learn.reeb.com
Unit Construction When a door is needed for remodeling or new construction, door unit configuration and handing are two important aspects that need to be determined. The first configuration decision is
Sentinel Single Hung Window 110
Available Finishes: White & Bronze Standard Glass Colors: Clear, Gray, Dark Gray (Turtle Code), Bronze, Solexia Green, Azuria Blue, White Interlayer, Mist (Pattern 62), Rain Sentinel Single Hung Window
Wood and Aluminum EnduraClad Exterior 6' 8" and 6' 10" Size Tables
6' 8" and 6' 10" Size Tables Scale 1/8" = 1' 0" All doors and sidelights are glazed with tempered glass. For windows and patio doors with HurricaneShield impact-resistant glass, see product instructions
Exterior Wood Door Units
4-5000-11 Section A Exterior Wood Door Units Page 1 Standard Unit Specifications Jamb: Primed Pine, 5/4 x Various Trim: WM180 Brick Moulding, 1-1/4 x 2 Sill Threshold: Fixed Aluminum, Thermal Break Bore:
Primed Traditional Sliding Patio Doors Premium Wood
TABLE OF CONTENTS Elevations/Sizes: 1/8 Scale StationaryPanel-WideStile... 20-4 2-Panel-WideStile... 20-5 3-Panel-WideStile... 20-6 4-Panel-WideStile... 20-9 Transoms:1/4 Scale... 20-10 GlazingOptions:3
SECTION 15 CHASSIS AND CONTAINER COMPONENTS
SECTION CHASSIS AND CONTAINER COMPONENTS Locking Pins... -... - Twist Locks... -... -... -... - Intermediate Headers... -... - Rear Corner Posts / Rear Bolsters... -... - Front Corner Posts... -... - Miscellaneous
Cross Sections. 300 R Series - for 3 3/4 Walls. For full information on Versatrac components, see Extrusions and Accessories tab.
Cross Sections 3 3 SIM 0 3 0 0 Walls showing Versatrac applications SIM 300 R Series - for 3 3/ Walls For full information on Versatrac components, see Extrusions and Accessories tab. Rev. 0/ Rev. 0/0
ALUMINUM HORIZONTAL ROLLER WINDOW
ALUMINUM HORIZONTAL ROLLER WINDOW Series HR610 Monolithic glazing does not provide hurricane protection. Specifications: Window members are extruded from a minimum of 6063-T5 aluminum alloy Frame members
S I ZE GU I DE CS = COTTAGE STYLE SASH SINGLE HUNG WINDOW SIZES SIDE LITES / /4 22 1/ / /4 26 1/ /4
64 65 56 57 64 65 48 49 52 53 56 57 40 48 49 5-10 56 68 69 52 53 RED LASS 5-6 68 69 68 56 69 57 76 77 5-6 68 6469 65 RED LASS 76 5-6 7768 69 40 48 49 48 49 SIDE LITES 5-6 68 69 1-2 15 13 14 48 49 SIDELITES
ROLLER SHADE SPECIFICATIONS
Part 1 General 1.1 Scope A. Furnish and install roller shades provided by Fabtex Inc., (800) 778-2791 B. Substitutions: Not Permitted C. Related work specified elsewhere 1.2 Quality Assurance A. Installer
CHAPTER 3 INTEGRITY WOOD ULTREX DOUBLE HUNG
CHAPTER 3 INTEGRITY WOOD ULTREX DOUBLE HUNG Specifications / NFRC Values... 3.2 Egress, Lite and Vent Measurements... 3.3 Egress, Lite and Vent Measurements / Abbreviations... 3.4 Sizing Guidelines / Measurement
Primed Casement Windows (1932 to 1989)
Primed Casement Windows (1932 to 1989) Parts Catalog Main Menu Section TOC Search What s in This Section Standard and Picture Windows...................................... Page 3 Parts Illustration...........................................................
Primed Casement Windows (1932 to 1989)
Primed Casement Windows (1932 to 1989) Parts Catalog Main Menu Section TOC Search What s in This Section Standard and Picture Windows...................................... Page 3 Parts Illustration...........................................................
400 Series Flexiframe Windows (1985 to Present)
400 Series Flexiframe Windows (1985 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Prefinished Flexiframe units were available 1980 to 1985. These units were not assembled
SITELINE WOOD WINDOW GEOMETRIC / DIRECT SET TABLE OF CONTENTS
GEOMETRI / DIRET SET TLE OF ONTENTS rchitectural Design Manual Questions? onsult JELD-WEN customer service. 1 GEOMETRI / DIRET SET GENERL INFORMTION Standard Sizes & Designs Wood geometric windows are
Trouble Shooting on Windows
Trouble Shooting on Windows Window problems could be the result of many different things, however, the first thing that you should check for are installation related issues. If installation issues are
TABLE OF CONTENTS. These three boxes can be changed/resized; whatever works best with the amount of images available to you.
FORGENT SERIES TABLE OF CONTENTS Material & Construction... 4 Complementary Specialty Windows... 26-33 Features & Benefits... 5 Complementary Inswing Doors... 34-39 Casements & Awnings... 6-13 Complementary
1010C Sliding Mall Front
NOVEMBER, 2017 FEATURES 1 Features Interior sliding mall front with parallel stacking capability Multi-track or single track with flush or surface mounted tracks Stainless steel cap on sill track Heavy
General Information SECTION DIRECTORY
SECTION DIRECTORY General Information Product Summary... V-AW-2 Product Selection Guide... V-AW-3 Size and Performance Data... V-AW-3 Features and Options... V-AW-3 Sound Transmission Class and Outdoor-Indoor
Perma-Shield Gliding Patio Doors
Casement Perma-Shield & Awning Gliding Patio Windows Doors 400 Casement Awning Windows & CUSTOM SIZING! in 1/8 increments. SECTION REFERENCE Table of Basic Unit Sizes 220 Opening Specifications 221 Basic
Visions 3000 Series 924 Parts Catalog
3000 Series Visions 3000 Series 924 Parts Catalog #1218583 FOR PRODUCT PRODUCED AFTER 4/07 Casement Casement Awning awning French Casement french casement Visions Windows and Doors 880 South View Drive
Technical Guide E. EDouble/Single Hung Windows. Technical Guide E1
Technical Guide E Double/Single Hung Windows E Windows Technical Guide E1 Product Features Specifications Styles Double Hung, Single Hung, Radius Top and Cottage options. Standard Features Natural, clear
EPICVUE CLAD-WOOD PATIO DOOR SLIDING PATIO DOOR TABLE OF CONTENTS
TABLE OF CONTENTS 1 Right Stationary GENERAL INFORMATION Dimensional Doors EpicVue Sliding Patio Doors may be specified as "dimensional", by adjusting the desired rough opening width or height in 1/16"
100 Series Gliding Windows (2008 to Present)
100 Series Gliding Windows (2008 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration...........................................................
7225 Non-Thermal / 8225TL Thermal Windows
EFFECTIVE PRICING MULTIPLIERS / EXAMPLE A1/1 THIS PRICING EXCLUDES 7225/8225 QUICK TRACK PROGRAM QUOTE/DER FM MUST BE USED AND SENT TO ESTIMATING/PROJECT MANAGEMENT PRICING MULTIPLIERS / INFMATION ALL
DFFB536 : INTERIOR ASSEMBLY [1/9]
![DFFB536 : INTERIOR ASSEMBLY [1/9]](/thumbs/93/112556315.jpg "DFFB536 : INTERIOR ASSEMBLY [1/9]")
DFFB536 : 001 - INTERIOR ASSEMBLY [1/9] Page 1 of 18 DFFB536 : 001 - INTERIOR ASSEMBLY [1/9] Ref # Part Number Qty. Description 1 L20910705 1 BRACKET LIGHT AR 36 2 PE950125 6 LIGHT SOCKET 3 A3079001 6
ROLLER SHADE SPECIFICATIONS
Part 1 General 1.1 Scope A. Furnish and install roller shades provided by Fabtex Inc., (800) 778-2791 B. Substitutions: Not Permitted C. Related work specified elsewhere 1.2 Quality Assurance A. Installer
Measuring Guide. How to measure for Clearview Secondary Glazing. clearviewsg.co.uk
Measuring Guide How to measure for Clearview Secondary Glazing Step 1 Familiarise yourself with the product The image below depicts an out of square window reveal, common in older properties. For secondary
400 Series Gliding Windows (1991 to Present)
400 Series Gliding Windows (1991 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Standard Windows................................................ Page 3 Parts Illustration...........................................................
100 Series Single-Hung Windows (2008 to Present)
100 Series Single-Hung Windows (2008 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration..........................................................
Sliding Patio Doors Builders Vinyl
TABLE OF CONTENTS Specifications... 7-2 QuickSpecGuide... 7-3 Elevations/Sizes: 1/4 Scale 2-Panel... 7-4 3-Panel... 7-5 2-Panel withtransom... 7-6 Sidelite... 7-8 Transom... 7-9 3-PanelTransom... 7-10
100 Series Gliding Windows (2008 to Present)
100 Series Gliding Windows (2008 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration...........................................................
SRD Design CORPORATION. Fenestration Specialists!
SRD Design CORPORATION Fenestration Specialists! Series 5000 By Champion Window & Door Syosset, New York Design by: SRD Design 2002 SRD Design CORPORATION ENGINEERING ENGINEERING SPECIALISTS DIVERSITY
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS HBA SERIES GAS RACK OVEN HBA1G HBA2G ML-132358 ML-132280 A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43070 Rev. C (June 2008) - 2 - HOBART Table of Contents
Architect Series Traditional. ONE-WAY (PASSAGE-DOOR) Min-Frame- Width-(Inches) Max-Frame- Width-(Inches)
SIZE DIMENSIONS Size-Dimensions NUMBER-OF- PANELS ONE-WAY (NO-PASSAGE-DOOR) ONE-WAY (PASSAGE-DOOR) (NO-PASSAGE-DOOR) (PASSAGE-DOOR) 2-PANEL 31-11/16 87-3/16 3-PANEL 46-1/8 129-3/8 46-15/16 130-3/16 4-PANEL
specialty entrances Table of Contents Specialty Entrances (C)
specialty entrances Table of Contents Specialty Entrances (C) Specialty Entrances (C) Table of Contents Entrance Door Handing page 2 Catalog Description Key page 3 Door Nomenclature page 3 Glass Entrance
260/360/560 INSULCLAD ENTRANCES
FEBRUARY, 2011 260/360/560 INSULCLAD ENTRANCES FEATURES 1 Features 260 Insulclad has 2-11/16" vertical stile, 2-13/16" top and 4-7/16" bottom rail 360 Insulclad has 4-1/16" vertical stile, 4-1/16" top
Pella Impervia 350 Series Vinyl Awning Windows and Sliding Patio Doors
Pella Impervia 350 Series Vinyl Awning Windows and Sliding Patio Doors Pella 350 Series premium vinyl windows and patio doors are available in a variety of frame types to help ensure a smooth installation
POWER-STUD. Mechanical Anchors GENERAL INFORMATION SECTION CONTENTS. Stainless Steel Wedge Expansion Anchor
General Information Mechanical s GENERAL INFORMATION POWER-STUD Stainless Steel Wedge Expansion PRODUCT DESCRIPTION The Power-Stud anchor, is a fully threaded, torque-controlled, wedge expansion anchor.
BALANCER DOOR WITH GEARBOX TENSIONER
INSTALLATION INSTRUCTIONS BALANCER DOOR WITH GEARBOX TENSIONER Phone: (800) 421-6144 Fax: (800) 587-7501 crlaurence.com usalum.com crl-arch.com 11M0219_REV_A ORDER OF ASSEMBLY AND INSTALLATION INTRODUCTION...
Uw = 0.66W/m²K Uf = 0.77 W/m²K Ug = 0.50 W/m²K
Uw = 0.66W/m²K Uf = 0.77 W/m²K Ug = 0.50 W/m²K Innovation is often spoken about, but very rarely delivered. Comar 0 offers a new departure, a Passivhaus certified product with U values as low as 0.66 coupled
400 Series Gliding Windows (1991 to Present)
400 Series Gliding Windows (1991 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Standard Windows................................................ Page 3 Parts Illustration...........................................................
400 Series Gliding Windows (1991 to Present)
400 Series Gliding Windows (1991 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Standard Windows................................................ Page 3 Parts Illustration...........................................................
Installation Information 2009 Model 300 Dumbwaiter
Installation Information 2009 Model 300 Dumbwaiter 3/17/09 Introduction This new model of Matot Dumbwaiter has several features that we hope you find are beneficial. Precision extruded rail sections provide
Commercial Doors. Overview 288 Commercial Doors 290. Commercial Doors
7 Commercial Doors Overview 288 Commercial Doors 290 Commercial Doors 7 Commercial Doors Overview Design Objectives Bi-fold Doors Commercial Doors offer a range of design styles to suit many applications.
81870 Alside_24667 Alside 11/3/16 5:01 PM Page 2 80 Series
80 Series Alpine s 80 Series is the ultimate in vinyl window technology. Our heavy-duty vinyl frames combined with 1" insulated, Low-E glass, make these windows some of the most energy-efficient produced.
Section E Fixed Sidelight All Glass. Header Showing U04 to U19 Drive Train Door Panels DS150 and U30 Drive Train...
Section E1 1 Fixed Sidelight All Glass Header Showing U0 to U19 Drive Train................................................... 3- Door Panels........................................................................
CLAD ULTIMATE CASEMENT ROUND TOP
RT21 / RT22 TWO WIDE STANDARD SIZES - OPERATOR AND STATIONARY RO (mm) 2-9 (838) 3-1 (940) 3-5 (1041) 4-1 (1245) 4-5 (1346) 4-9 (1448) 4-11 5/8 (1514) 4-7 5/8 (1413) 4-5 5/8 (1362) 3-11 5/8 (1210) 3-7 5/8
Architect Series Traditional
SECTION DIRECTORY Product Selection Guide Size and Performance Data... LSPD-2 Grille Types... LSPD-3 Size Dimensions and Panel Configurations... LSPD-5 Design Data Vent and Fixed... LSPD-7 Detailed Product
100 Series Awning Windows (2008 to Present)
100 Series Awning Windows (2008 to Present) CCParts Catalog Main Menu Section TOC Search What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration...........................................................
Milgard Windows & Doors. Training Module Ultra and WoodClad Windows & Doors
Milgard Windows & Doors Training Module Ultra and WoodClad Windows & Doors Why Fiberglass? Structural integrity - no warping, swelling, rotting Strength - high tensile strength 8x stronger than vinyl Up
DOUBLE/SINGLE HUNG WINDOWS
E2 Robson Bilgen Architects NEW ENGLAND COUNTRY HOUSE TECHNICAL GUIDE E /SINGLE HUNG WINDOWS PRODUCT FEATURES SPECIFICATIONS STYLES GLAZING STANDARDS SIMULATED DIVIDED LITES (SDL) E2 Double Hung, Single
CENTER-HUNG WIDE STILE SERIES 550 DOOR TYPICAL ELEVATION CENTER-HUNG WIDE STILE SERIES 550 DOOR ADA COMPLIANT ELEVATION
C.R.LAURENCE CO. ARCHITECTURAL PRODUCTS CE RT F I E D ISO9000 COMP AN Y BUILDING GLASS RAILING SYSTEMS SAFER STRONGER WITH BRILLIANT TRANSPARENCY I OR SYSTEM Revisions By: 1 1 FOR 1/4" OR 1" GLAZING 8
Technical Guide J. JSliding Patio & French Doors. Technical Guide J1
Technical Guide J Sliding Patio & French Doors J Technical Guide J1 Product Features Specifications Styles Operating/Fixed (XO or OX), Operating/Fixed/Operating (XOX), Fixed/Operating/Operating/Fixed (OXXO),
Sliding Windows Builders Vinyl
TABL OF CONTNTS Specifications... 5-2 QuickSpecGuide... 5-3 levations: Scale 2-Wide Sliding Windows... 5-4 3-Wide Sliding Windows... 5-8 Grille Patterns... 5-10 SectionDetails: 6 Scale... 5-11 WallDetails...
100 Series Awning Windows (2008 to Present)
100 Series Awning Windows (2008 to Present) CCParts Catalog Main Menu Section TOC Search What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration...........................................................
Aluminum Series SH600 Product Specifications
Product Specifications Monolithic glazing does not provide hurricane protection. Specifications: Window members are extruded from a minimum of 6063-T5 aluminum alloy Frame members have a nominal depth
EURO VISTA FOLD. Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL FOLDING SLIDING STACKING PIVOT
EURO VISTA FOLD IMPACT RATED Aluminum FOLDING Doors Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL 17838 www.euro-wall.com 888.989.EURO (3876) FOLDING SLIDING
Siteline EX Clad Casement Windows Premium Wood
TABLE OF CONTENTS Specifications... 1-2 QuickSpecGuide... 1-4 Elevations:1/4 Scale... 1-6 Casement... 1-9 CasementPicture... 1-23 CasementPicturewithFlankers... 1-29 CasementSectorTop... 1-34 SashGlazingOptions:3
C SERIES CATALOG SCREEN FRAME LINEALS & COMPONENTS MASON CORPORATION
C SERIES CATALOG LINEALS & COMPONENTS Corporate Office 123 Oxmoor Road West Birmingham, AL 35209 P.O. Box 59226 Birmingham, AL 35259-9226 Telephone: 1/800/868-4100 Fax: (205) 945-4304 Mason-Dallas 2080
100 Series Single-Hung Windows (2008 to Present)
100 Series Single-Hung Windows (2008 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration...........................................................
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS OV500 ELECTRIC RACK OVENS ML-132501 ML-132499 OV500E1 OV500E2 A product of BAXTER MFG. CO., INC. 19220 STATE ROUTE 162 EAST, ORTING, WA 98360 FORM 43203 Rev. B (June 2015)
WA67 Folding System - Aluminum Clad Over Wood
TABLE OF CONTENTS WA67 WA67 Folding System - Aluminum Clad Over Wood Features.......................................................................................................................... 1
100 Series Awning Windows (2008 to Present)
100 Series Awning Windows (2008 to Present) CCParts Catalog Main Menu Section TOC Search What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration...........................................................
E3 Architecture WINDERMERE PROJECT TECHNICAL GUIDE J SWINGING TERRACE & FRENCH TERRACE DOORS
E3 Architecture WINDERMERE PROJECT TECHNICAL GUIDE J SWINGING TERRACE & FRENCH TERRACE DOORS PRODUCT FEATURES SPECIFICATIONS STYLES Traditional, French, Camber Top, Quarter Round and Full Radius options.