GEA Bock Software VAP 11 (Online) New in this version

Transcription

1 GEA Bock Software VAP 11 (Online) New in this version June

2 Overview New in this version VAP 11 (Online) New products/product features: New type size in FDK-series (open type compressor units): FDK18 New model range SFD (open type compressor units with clutch bell): SFD18 Update of capacity data and application limits of HC refrigerants (R290, R1270) Neue Software-Features: Implementation of special motors for semi-hermetic compressors Modifications frequency inverter operation with semi-hermetic compressors Extension with Former models with hyperlink to succeeding model 2

3 New type size in FDK-series: FDK18 Two new sizes of open type compressor units FDK: FDK(X)18/2735 FDK(X)18/3235 FDK18-compressor units consist of a F(X)18-compressor with shaft coupling for direct drive mounted on a robust profile base frame. Optionally IEC standard motors of type IMB3 are offered as drive motors. The compressor design is very compact and robust. Reliable mechanism lubrication is guaranteed by means of an oil pump which is independent of rotating direction, as well as a large-volume oil sump. Colour: blue (RAL 5000) 3

4 New model range: SFD18 New model range SFD (open type compressor units with clutch bell): SFD(X)18/2735 SFD(X)18/3235 SFD18-compressor units consist of a F(X)18-compressor with shaft coupling and clutch bell for direct drive mounted on a robust profile base frame. Optionally IEC standard motors of type IMB5 are offered as drive motors. The compressor design is very compact and robust. Reliable mechanism lubrication is guaranteed by means of an oil pump which is independent of rotating direction, as well as a large-volume oil sump. Colour: blue (RAL 5000) 4

5 Update HC-capacity data Capacity data and limits of application with the natural refrigerant of the hydrocarbons (R290, R1270) have been updated: Extension of applications limits regarding lower evaporation temperatures. Consideration of a partly necessary minimum superheat of 20K. 5

6 Implementation of special motors In addition to the standard motors (400V, 50Hz) the semi-hermetic compressors can be ordered with motors for special power supplies. Now, the electrical data of the special motors (current draw in operation point, max. current consumption, max. power consumption and starting currents) were included in the software. Motors for all common power supplies are considered. Please note that the availabilty of the special motors has still to be requested. Motors for special power supplies which are not included in the software are also on request. 6

7 Selecting a (special) motor in the software To select a (special) motor, firstly the according power supply has to be selected. Afterwards a suitable motor for the adjusted power supply is suggested. The suggested motor type is the common type for the chosen compressor. Depending on compressory type and selected power supply further motor types can be chosen (e.g. D/S or PW). 7

8 (Special) motors / Current draw For the selected (special) motor the current draw at the adjusted operation condition is shown: 8

9 (Special) motors / Electrical data For the selected (special) motor the electrical data are shown in the tap Technical Data : 9

10 Modifications regarding inverter operation Whether the compressor is frequency inverter operated or not can be defined via the choice box frequency converter : If for the chosen compressor an EFC (on-top mounted frequency converter) is offered (e.g. HG12P- 34e) then EFC is pre-selected as frequency inverter type. Alternatively Other as frequency inverter (external frequency inverter, third-party product) is selectable. There is no distinction in calculation when EFC or Other is selected as frequency inverter. When compressor is operated with frequency inverter the capacity data is calculated out of the 50Hz-data and is intended as an assistance to determine the capacity data at different frequencies. Deviations cannot be excluded. 10

11 Modifications regarding inverter operation When Frequency inverter is selected then the caption Supply frequency will change to Compressor frequency. The compressor frequency is than adjustable within the permissible frequency range. 11

12 Modifications regarding inverter operation When Frequency inverter is selected then the Current draw will be faded out. Reason: Up to now there is no suitable formula to calculate the current draw with frequency inverter. the minimal and maximal expected cooling capacity is shown: 12

13 Former Types Now old compressor/unit types can be found in the new folder Former types: 13

14 Former Types If there is a successor model for the old compressor/unit type it can be directly selected by the link Successor: Please note that the successor type may be different from the former type in some properties (e.g. dimensions, capacity data, etc.) 14

15