Altistart 22 soft start/soft stop units

Transcription

1 Altistart Catalog 00 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

2 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

3 Altistart Product data website.... Overview Selection guide Introduction References... Combinations.... Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

4 Go online to for technical information about products listed in this catalog, including: > Specifications > Dimensions > References > Voltages > Standards and Certifications. From the home page, type the model number* into the Search box (for example ATS ): * Type the model number without any spaces, and replace with *. B A 0. From Search Results you may choose several different options for Product Information (see A - D on next page): D C Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

5 A. A Choose Products for Product Overview, Product Selector and available Documents & Downloads: B. B Choose Product Detail for features, specifications and for ordering product: C. C Choose Selection Guide for product information in printable PDF format: D. D Choose Technical Library for Users Manuals and Catalogs: 0 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

6 Make the most of your energy SM 0 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

7 Altistart Innovative Economical Compact Reduce your operating costs Simplify wiring Protect your electrical installation Save space 0 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

8 Altistart : Reduce your costs with its integrated bypass function... Simple installation and operation Save time on wiring ( terminals instead of ) Optimize the size of your enclosures (Altistart soft start/soft stop unit is very compact) Keep temperature increases to a minimum (low heat dissipation) Reduce the number of components you need to manage (multi-function product) controlled phases 0% reduction in wiring time 0 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

9 ... while you reduce mechanical stress on your machines, and increase their service life Protect your installations By minimizing jolts and shocks, the Altistart soft start/ soft stop unit reduces mechanical stress on your machines, and increases their service life. Altistart helps prevent installation failure by detecting and signalling faults such as a blocked motor, underload, or incorrect grounding of one of the motor phases. Cards are coated (standard) to provide enhanced resistance to harsh environments. Play it safe with a complete product Altistart, with its three controlled phases, incorporates all the protection functions required to monitor the motor, the electrical installation and the starter itself. Simplify setup and operation with: - light emitting diodes (LEDs) - navigation keys - -digit display - SoMove setup software (common to Altivar, Lexium and TeSys products) 0 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

10 Selection guide Altistart Applications Starting simple machines Controlled starting and deceleration of simple machines Power range for 0 to 0 Hz (kw) line supply 0. to 0. to (connection to the motor s power supply line) Single-phase 0 to 0 V (kw) 0. to. Three-phase 00 to 0 V (kw) 0. to. Three-phase 00 to 0 V (kw) 0. to Three-phase 0 to 00 V (kw) Three-phase 0 to 0 V (kw) Three-phase 0 to V (kw) Three-phase 0 to 0 V (kw) Three-phase 0 to V (kw). to Drive Number of controlled phases Type of control Operating cycle Functions Bypass Number of I/O Integrated Analog inputs Logic inputs Analog outputs Logic outputs Relay outputs Communication Integrated Available as an option Standards and certifications IEC/EN 0-- e, UL, CSA, C-Tick and CCC References ATS0Npppp ATS0Npppp Page 0 See more technical information online at Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

11 Controlled starting and deceleration of simple and complex machines to 00 to 00 to 00 to 00 to 0 to Configurable voltage ramp TCS (Torque Control System) Standard Standard and severe Integrated Available as an option PTC probe PTC probe ("N/C" / "N/O") Modbus Modbus FIPIO, PROFIBUS DP, DeviceNet, Modbus TCP IEC/EN 0--, EMC class A e, UL, CSA, C-Tick, GOST, CCC IEC/EN 0--, EMC classes A and B e, UL, CSA, DNV, C-Tick, GOST, CCC, NOM, SEPRO and TCF ATSpppp ATSpppQ ATSpppY 0 See more technical information online at Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

12 Introduction Altistart The Altistart soft start/soft stop unit offer Introduction The Altistart soft start/soft stop unit supports the controlled starting and stopping via voltage and torque of three-phase squirrel cage asynchronous motors for power ratings between and 00 kw. It comes ready-to-use for standard applications with class 0 motor protection. The Altistart soft start/soft stop unit has been designed to satisfy the performance requirements of applications where ruggedness, the safety of personnel and equipment, and easy commissioning are at a premium. The bypass function (based on a bypass contactor) has been made easier to use by integrating it into the starter. This approach suits applications where it may be necessary to bypass the starter at the end of the starting process, in order to limit the starter s heat dissipation. The Altistart soft start/soft stop unit contains an integrated display terminal which allows the user to change both the programming and the adjustment monitoring parameters, in order to adapt and customize the application to customer needs. The unit also features thermal protection for motors as well as a monitoring facility for machines, and utilizing the SoMove setup software, enables the installation to be commissioned immediately. Applications The integrated functions of the Altistart soft start/soft stop unit are compatible with the more common types of application found in the construction, infrastructure or industrial sectors: b Centrifugal pumps, piston pumps b Fans b Screw compressors, etc. b Material handling (conveyors, etc.) b Specialist machines (agitators, mixers, centrifugal machines) The Altistart soft start/soft stop unit represents a truly cost-effective solution by providing: b Reduction in installation costs by optimizing product sizes, integrating the bypass function and reducing wiring time b Reduction in the stress associated with electrical distribution by reducing the peaks and line voltage drops caused by motors starting b Reduction in running costs for machines by reducing mechanical stress Controlling the three phases of the motor windings helps ensure that performance remains satisfactory (with or without a load, all voltage and power ranges, etc.). Conformity to standards Type Conducted and radiated emissions Vibration resistance Shock resistance Maximum ambient pollution Relative humidity Conforming to IEC 0-- Conforming to IEC 00-- Conforming to IEC 00-- Conforming to IEC 0- Conforming to IEC 00-- Performance Class A. mm from to Hz, gn from to 00 Hz gn for ms Step % non-condensing, no dripping water Degree of protection For ATSD to C IP 0 (IP 00 if no connections) For ATSC to C IP 00 The Altistart soft start/soft stop unit conforms to the RoHS Directive. 0 References: page Combinations: page 0 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

13 Introduction (continued) Altistart Functions The main functions integrated in the drive are as follows: Adjustment functions b Adjustment of the Altistart soft start/soft stop unit's in line with the motor's nominal b Limiting b Selection of the type of stop (freewheel or deceleration) Drive performance functions b Management of the three supply phases b Option of connecting the starter in the motor delta connection in series with each winding. This supports the use of a soft start/soft stop unit with a lower rating (only applies to the ATSpppQ range) b Management of the ramp and torque supplied to the motor throughout the acceleration and deceleration period (significantly less jerk) b Variety of control profiles to suit different applications b Integrated and automated management of the bypass function at the end of the starting process (based on a bypass contactor), while preserving electronic protection features Protection functions for the motor and machine b Integration of configurable motor thermal protection b Thermal protection for the Altistart soft start/soft stop unit b Integrated processing of the PTC thermal probe with electrical isolation (optimum management of motor protection) b Monitoring of the duration and number of starts (better installation safety) b Management of stopping time before restart b Automatic restart b Protection against underloads and overs in transient or steady state b Automatic adjustment to the line frequency b Detection of phase sequence b Detection of phase loss b Detection of imbalances between phases and of leakage s (for the ATSpppS and SU ranges) Functions to ease integration into control systems b programmable logic inputs b programmable N/C / N/O relay outputs b Pluggable connectors for I/O b Second set of parameters for motor operation b Modbus serial link via RJ connector b Display of soft start/soft stop unit and machine states b Display of I/O s and states b Error log, diagnostics for soft start/soft stop unit b Return to factory settings b LEDs on the front face (Ready, Communication, Run and Trip) 0 References: page Combinations: page Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

14 Introduction (continued) Altistart Commissioning the ATS soft start/soft stop unit with SoMove lite setup software Product range The Altistart soft start/soft stop unit features voltage ranges for motor power ratings from to 00 kw: b Three-phase power supply voltage from 0 V to 0 V, 0/0 Hz (ATSpppQ) b Three-phase power supply voltage from 0 V to 00 V, 0/0 Hz (ATSpppS and ATSpppSU) Options The Altistart soft start/soft stop unit offers a number of options: b A remote terminal unit can be installed on the front face of a floor-standing enclosure with IP /NEMA or IP protection (depending on the model). It offers the same functions as an integrated display terminal. b Additional fans to support a greater number of starts b SoMove lite setup software b Protection shrouds for terminals to ensure compliance with IP 0 degree of protection Selection criteria The Altistart soft start/soft stop unit has been designed for standard control system applications. In addition to the chosen application, the choice of starter will depend on the following main criteria: b The power and nominal on the motor rating plate b The load factor for the application The starting capacity also needs to be considered when selecting an Altistart soft start/soft stop unit: Starting capacity The standard starting capacity for a class 0 motor is: b. In for 0 seconds from cold with S motor duty b. In for 0 seconds with S motor duty, based on a load factor of % Note: S motor duty is based on a start followed by operation at constant load, making it possible to achieve thermal equilibrium. S motor duty is based on a cycle consisting of a start, operation at constant load and an idle period. Number of starts per hour Assuming the starting capacity remains the same, the number of starts per hour can be increased by adding a fan. The ATSDQ to CQ, ATSDS to CS and ATSDSU to CSU can be fitted with an additional fan. Page 0/ has details of this option. Possible number of starts per hour based on a capacity of. In for 0 seconds (S motor duty) after adding a fan: Soft start/soft stop units Number of starts per hour Without fan With additional fan ATSDp to Dp 0 ATSDp to Dp 0 ATSCp to Cp 0 Note: The ATSCQ to CQ, ATSCS to CS and ATSCSU to CSU soft start/ soft stop units come with a fan as standard. The standard number of starts per hour for S motor duty is. Anything more would require the next lowest rating. 0 References: page Combinations: page Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

15 Introduction (continued) Altistart Standard application areas Examples of functions performed by the Altistart soft start/soft stop unit depending on the application chosen Type of machine Functions performed by the Altistart Centrifugal pump Controlled slowing-down and stopping (fewer hammer blows) Protection against underload or reversal of phase rotation direction Piston pump Control of pump priming and the pump's direction of rotation Fan Detection of overloads and underloads (motor/fan transmission broken) Braking torque on stopping Turbine Refrigeration compressor Thermal monitoring of motor via electrically isolated PTC probe Control of starting characteristics Management of automatic restart Screw compressor Protection against reversal of phase rotation direction Contact for automatic emptying on stopping Example of pumping application using the Altistart soft start/soft stop unit Centrifugal compressor Conveyor Conveyor belt Protection against reversal of phase rotation direction Contact for automatic emptying on stopping Monitoring of overloads for incident detection or underloads for break detection Second set of motor parameters depending on the load transported Lifting screw Monitoring of overloads for hard spot detection or underloads for break detection Agitator Displaying the indicates the density of the material. Mixer Refiner Displaying the indicates the density of the material. Boost on start-up Torque control on starting and stopping Dedicated applications The Altistart soft start/soft stop unit can be used for applications outside the standard characteristics, but this could involve derating to at least the next lowest level. Examples of applications outside the standard characteristics: b Greater number of starts b Motor thermal protection higher than class 0 b Excess required at time of start b Certain ambient temperatures: For ambient temperatures between +0 C and +0 C, derate the nominal of the Altistart by.% for each additional degree. b Certain altitudes: For altitudes between 000 and 000 meters, derate the nominal of the Altistart by % for each additional 00 meters. 0 References: page Combinations: page Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

16 References Altistart Three-phase power supply voltage 0 to 0 V ATSDQ ATSDQ ATSCQ Connection to the motor's power supply line Motor power given in kw in accordance with standard IEC/EN V control power supply Motor 0 to 0 V - 0/0 Hz soft start/soft stop unit Power indicated on rating plate Nominal (In) () Factory setting for (IcL) () () Dissipated power at nominal () Dimensions (W x D x H) Reference Weight 0 V 00 V 0 V kw kw kw A A W mm kg... 0 x x ATSDQ x x ATSDQ x x ATSDQ x 0 x ATSDQ.000. x 0 x ATSDQ.000 x 0 x ATSDQ x x ATSCQ x x ATSCQ x x ATSCQ x x ATSCQ x x ATSCQ x x ATSCQ x x ATSCQ x 0 x ATSCQ x 0 x ATSCQ Connection to the motor's delta connection Motor power given in kw in accordance with the standard IEC/EN V control power supply Motor 0 to 0 V - 0/0 Hz soft start/soft stop unit Power indicated on rating plate Nominal (In) () Factory setting for (IcL) () () Dissipated power at nominal () Dimensions (W x D x H) Reference Weight 0 V 00 V 0 V kw kw kw A A W mm kg. 0 x x ATSDQ x x ATSDQ x x ATSDQ.000 x 0 x ATSDQ x 0 x ATSDQ.000 x 0 x ATSDQ x x ATSCQ x x ATSCQ x x ATSCQ x x ATSCQ x x ATSCQ x x ATSCQ x x ATSCQ x 0 x ATSCQ x 0 x ATSCQ () In refers to the maximum continuous for class 0. IcL refers to the starter rating. () The factory setting for the equates to the nominal of a standard -pole, 00 V, class 0 motor (standard application). It should be adjusted in line with the indicated on the motor rating plate. () The factory setting for the should be adjusted in line with the indicated on the motor rating plate. () Includes the power dissipated by the fan 0 Introduction: page 0 Combinations: page Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

17 References (continued) Altistart Three-phase power supply voltage 0 to 00 V ATSCS ATSCSU Connection to the motor's power supply line Motor power given in kw in accordance with standard IEC/EN V control power supply Motor 0 to 00 V - 0/0 Hz soft start/soft stop unit Power indicated on rating plate 0 V 00 V 0 V 00 V Nominal (In) () Factory setting for (IcL) () () Dissipated power at nominal () Dimensions (W x D x H) Reference Weight kw kw kw kw A A W mm kg.. 0 x x ATSDS x x ATSDS x x ATSDS x 0 x ATSDS.000. x 0 x ATSDS.000 x 0 x ATSDS x x ATSCS x x ATSCS x x ATSCS x x ATSCS x x ATSCS x x ATSCS x x ATSCS x 0 x ATSCS x 0 x ATSCS Motor power given in HP. 0 V control power supply Motor 0 to 00 V - 0/0 Hz soft start/soft stop unit Power indicated on rating plate Nominal (In) () Factory setting for (IcL) () () Dissipated power at nominal () Dimensions (W x D x H) Reference Weight 0 V 0 V 0 V V HP HP HP HP A A W mm kg 0 0 x x ATSDSU x x ATSDSU x x ATSDSU x 0 x ATSDSU x 0 x ATSDSU x 0 x ATSDSU x x ATSCSU x x ATSCSU x x ATSCSU x x ATSCSU x x ATSCSU x x ATSCSU x x ATSCSU x 0 x ATSCSU x 0 x ATSCSU () In refers to the maximum continuous for class 0. IcL refers to the starter rating. () The factory setting for the should be adjusted in line with the indicated on the motor rating plate. () Includes the power dissipated by the fan 0 Introduction: page 0 Combinations: page Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

18 References (continued) Altistart Options: Dialog and configuration tools SoMove setup software SoMove setup software Introduction This software enables the user to configure, set, debug and organize maintenance tasks for the Altistart soft start/soft stop unit. It can also be used to customize the integrated display terminal menus. It can be downloaded from our website, Reference Description Reference Weight kg SoMove lite setup software USB/RJ cordset equipped with a USB connector and an RJ connector. For connecting a PC to the Altistart soft start/soft stop unit. Length:. m Modbus - Bluetooth adaptor For establishing a Bluetooth wireless connection between the Altivar drive and a PC equipped with a Bluetooth wireless link. Pack contents: bb Bluetooth adaptor (range 0 m, class ) with an RJ connector b b x 0. m cordset with RJ connectors, to () ATVpppppp USB - Bluetooth adaptor for PC Required for a PC which is not equipped with Bluetooth technology. Connects to a USB port on the PC. Range of 0 m (class ). TCSMCNAMM00P 0. VWA 0. VWA 0.00 Remote display terminal Introduction This terminal enables the human machine interface of the Altistart soft start/soft stop unit to be positioned remotely on the door of an enclosure. It has IP /NEMA or IP degree of protection depending on the model. It is used to: b Set and configure the soft start/soft stop unit remotely b Display the status and faults of the soft start/soft stop unit remotely b Maximum operating temperature is 0 C. Description -digit display Selection/validation key ENT: opens a menu or validates the value chosen Navigation keys, Selection key ESC: used to exit a menu VWG0 References Description Remote display terminals A remote-mounting cordset is also required - VWA0Rpp Remote-mounting cordsets equipped with RJ connectors Degree of protection Length Dimensions Reference Weight W x D x H m mm kg IP /NEMA 0 x x 0 VWG0 0.0 IP x x 0 VWG0 0. VWA0R VWA0R0 0.0 () Also includes other components for connecting compatible Schneider Electric devices. 0 Introduction: page 0 Combinations: page Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

19 References (continued) Altistart Options: Modbus serial link, fans, accessories and documentation Modbus serial link () Programmable controller Modbus serial link Connection via splitter box and RJ connectors Description Number Length Unit Weight m reference kg Modbus splitter box with 0 RJ connectors LUGC 0.00 ATS Example of a connection using a Modbus serial link via a splitter box with RJ connectors Cordsets for Modbus serial link with RJ connectors Modbus T-junction boxes (with integrated cable) Line terminators () () 0. VWA0R0 0.0 VWA0R VWA0R VWA0TF0 0.0 VWA0TF0 0.0 R = 0 W VWA0RC 0.00 C = nf R = 0 W VWA0R 0.00 Fans The ATSCQ to CQ, ATSCS to CS and ATSCSU to CSU come with an integrated fan. The ATSDQ to CQ, ATSDS to CQS and ATSDSU to CSU are ventilated by means of natural convection. For more demanding applications, such as those with a greater number of starts, the Altistart range offers fans as an option. These are driven by the soft start/soft stop unit and attached to the back of the device. The fan's noise level is less than 0 dba. VWG0p References Description Power supply voltage for control For soft start - soft stop units Dimensions W x D x H Reference Weight V mm kg Fans 0 ATSDQ to DQ, 0 x 0 x VWG00.00 ATSDS to DS ATSDQ to DQ, x 0 x VWG0.00 ATSDS to DS ATSCQ to CQ, 0 x 0 x 0 VWG0.00 ATSCS to CS 0 ATSDSU to DSU 0 x 0 x VWGU00.00 ATSDSU to DSU x 0 x VWGU0.00 ATSCSU to CSU 0 x 0 x 0 VWGU0.00 Protection shrouds for power terminals (to be used with eyelet connections) The ATSCQ to CQ, ATSCS to CS and ATSCSU to CSU have unprotected power terminals. These terminals can be fitted with protection shrouds. LA F0p Description For soft start - soft stop units Set of power terminal protection ATSCQ to CQ, shrouds ATSCS to CS, ATSCSU to CSU ATSCQ to CQ, ATSCS to CS, ATSCSU to CSU Reference Weight kg LAF0 0.0 LAF0 0.0 Documentation Description Reference Weight kg Description of the Motion & Drives Offer DVDROM () It consists of: bb Technical documentation (programming manuals, installation manuals, quick reference guides) bb SoMove lite setup software bb Brochures, catalogs. The documentation relating to the Altistart product is also available on our website, VWA () Cable depends on the type of controller or PLC () Sold in lots of () Depends on the bus architecture () Updated version including the Altistart range available st quarter 00 0 Introduction: page 0 Combinations: page Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

20 Combinations Altistart Motor starters: 00 to 0 V three-phase power supply voltage Type coordination 0 Q: GVp/ NSppp R/L U/T U S/L V/T V M: M three-phase asynchronous motor Motor starter with protection by circuit breaker or switch disconnector Introduction: page 0 Q: GSppp T/L W/T W F : DF pa KM: TeSys LC p A: ATSp Compatible components in accordance with standard IEC/EN 0-- Use the contactor and starter with either a circuit breaker or a fuse switch disconnector. Three-phase, -pole motor 0/0 Hz Class 0 starter () Circuit breaker TeSys Contactor () Fuse switch disconnector (for front and side control) am fuse Reference Rating Unit Size Rating 00 V 0 V reference kw kw A A () mm A M M A Q KM F... ATSDp GVL0 LCDpp GSDD DFCA 0 x NS0H-MA. ATSDp GVL LCDpp GSDD DFCA 0 x NS0H-MA 0 ATSDp GVL0 LCD0App GSF DFEA0 x 0 NS0H-MA ATSDp GVL LCDApp GSJ DFFA x NS0H-MA 0 ATSDp NS0H-MA 0 LCD0pp GSJ DFFA0 x 0 ATSDp NSX00pMA () 00 ATSCp NSX0pMA () ATSCp NSX0pMA () 0 0 ATSCp NSX0pMA () 0 0 ATSCp NSX0pMA () 00 LCDpp GSJ DFFA00 x 00 0 LCDpp GSK DFFA x 0 LCD0pp GSL DFGA LCFpp GSN DFHA LCFpp GSN DFHA 0 ATSCp NSX00p Micrologic.-M () 0 LCFpp GSN DFHA ATSCp NSX00p Micrologic.-M () 0 LCF0pp GSQQ DFJA 0 0 ATSCp NSX0p 00 LCF00pp GSS DFKA0 00 Micrologic.-M () 0 0 ATSCp NSX0p 00 LCF00pp GSS DFKA0 00 Micrologic.-M() 0 ATSCp NS0bp Micrologic.0 () 00 LCF0pp GSS DFKA 0 () Replace p with Q or S depending on the starter's voltage range. To find more information on combinations for motor power supply voltages of 0 V (ATSpppQ starters) or 00 V (ATSpppS starters), please visit our website at () Replace p with F, N, H, S or L depending on the breaking capacity; see table below. () Replace pp with the control circuit voltage reference: please consult our Motor starter solutions. Control and protection components catalog. () DF CA, EA, FA: sold in lots of 0. DF GA, HA, JA, KA: sold in lots of. Maximum prospective short-circuit of the starter according to standard IEC/EN 0-- Starter ATSDp to ATSDp ATSDp to ATSCp 0 References: page Iq (ka) in 00 V Breaking capacity of circuit-breakers according to standard IEC/EN 0-- Circuit-breaker Icu (ka) in 00 V Icu (ka) in 0 V GVL 0 0 NS0H-MA 0 Circuit-breaker Icu (ka) in 00 V Icu (ka) in 0 V F N H S L F N H S L NSX00 to NSX NS0b Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

21 Combinations (continued) Altistart Motor starters: 0 to V three-phase power supply voltage R/L U/T U S/L V/T V T/L W/T W F : AJT ppp KM : TeSys LC p A : ATSp M: M three-phase asynchronous motor Motor starter with protection by fuse Compatible components Product without enclosure Three-phase, motor 0/0 Hz 0V HP 0V HP 0 V HP Class 0 starter V HP A ka Maximum short-circuit (SCC) at 00 V TeSys Contactor () Time delay fuse (sold by Ferraz Fuses) Class J M M M M A KM F 0 ATSDSU LC Dpp AJT ATSDSU LCDpp AJT ATSDSU LCD0App AJT ATSDSU 0 LCDApp AJT ATSDSU 0 LCD0App AJT 0 0 ATSDSU 0 LCDpp AJT ATSCSU 0 LCDpp AJT ATSCSU 0 LCD0pp AJT ATSCSU 0 LCFpp AJT ATSCSU LCFpp AJT ATSCSU LCFpp AJT ATSCSU LCF0pp x AJT ATSCSU LCF00pp x AJT ATSCSU LCF00pp x AJT ATSCSU 0 LCF0pp x AJT00 Compatible components in accordance with standard UL0 Enclosed product Three-phase, -pole motor 0/0 Hz 0V HP 0 V HP 0 V HP V HP A Class0 starter Maximum short-circuit (SCC) at 00V Minimum enclosure volume Contactor () Time delay fuse ka dm inch A Class J M M M M A KM F 0 ATSDSU LCDpp ATSDSU LCDpp ATSDSU LCD0App ATSDSU 00 LCDApp ATSDSU 00 LCD0App ATSDSU 00 LCDpp ATSCSU 00 0 LCDpp ATSCSU 00 0 LCF0pp ATSCSU 00 0 LCFpp ATSCSU 00 0 LCFpp ATSCSU 00 0 LCFpp ATSCSU 00 0 LCF0pp ATSCSU 00 0 LCF00pp ATSCSU 00, LCF00pp ATSCSU 00, LCF0pp 00 Class L A () Replace pp with the control circuit reference: please consult our Motor starter solutions. Control and protection components catalog. 0 Introduction: page 0 References: page Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

22 Schneider Electric USA, Inc. 00 Knightdale Blvd. Knightdale, NC Tel: -- Waterman Avenue Toronto, Ontario MB Y Tel: --00 The information and dimensions in this catalog are provided for the convenience of our customers. While this information is believed to be accurate, Schneider Electric reserves the right to make updates and changes without prior notification and assumes no liability for any errors or omissions. Altistart, Altivar, Lexium, TeSys, Modbus, FIPIO, Micrologic, SoMove, Schneider Electric and logo, and "Make the most of your energy" are trademarks or registered trademarks of Schneider Electric or its affiliates in the United States and other countries. Other trademarks used herein are the property of their respective owners. Design: Schneider Electric Photos: Schneider Electric DIAED000EN-US ART Schneider Electric. All rights reserved. 0/00 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-