at a reduced size!...

Size: px

Start display at page:

Download "at a reduced size!..."

Ashlyn Pitts
6 years ago
Views:

1 Telemecanique Altivar 11 Real efficiency at a reduced size!... Altivar 11 variable speed drives for asynchronous motors from 0.18 to 2.2 kw Building a New Electric World

Altivar 11 : The little one with big prospects.

different, not only in size, but above all in its

0.18 to 2.2 kw Voltage ranges: 120 V single-phase.

2 Altivar 11 : The little one with big prospects... The new Altivar 11 variable speed drive is truly different, not only in size, but above all in its features: Identical performance to the Greats. Uninterrupted service. Perfect suitability for any application. International coverage. The smallest drive in the world For motor powers from 0.18 to 2.2 kw Voltage ranges: 120 V single-phase. 240 V single-phase. 230 V 3-phase. Standards and certifications: EN / EN EN 55011, EN class B and class A gr. 1 NOM 117 / C-TICK. N998

...for all your applications from 0.18 to 2.

handling: conveyors, garage doors, parking barriers, supplying conveyors, etc... Special machines: grinders, saws, drills, exercise equipment, hoardings, extractors, dough mixers, etc.

It easily replaces all these solutions. Parking barriers Exceptional dynamics: Use of an advanced flux vector motor control minimises cycle times.

3 ...for all your applications from 0.18 to 2.2 kw Thanks to the the advanced flux vector control and specific application functions of the Altivar 11: Perfect for simple mechanical applications in industrial and commercial sectors: Mechanical handling: conveyors, garage doors, parking barriers, supplying conveyors, etc... Special machines: grinders, saws, drills, exercise equipment, hoardings, extractors, dough mixers, etc... The performance and simplicity of the Altivar 11 will make you forget multispeed motors, mechanical drives, DC drives, special motors and electromechanical starters, etc. It easily replaces all these solutions. Parking barriers Exceptional dynamics: Use of an advanced flux vector motor control minimises cycle times. Customisation of "Up / Down" cycles due to the assignment of several functions on the same logic input: Different ramps for up / down cycles. Up priority if obstructed going down. Different pre-selectable speeds both for up / down cycles. Answers to abrupt weather changes: Operation assured down to -10 C. Hoardings Serial configurations and simplified maintenance: Use of PowerSuite software workshop on standard PC or Pocket PC. Optimisation of size Use of baseplate version. Solutions for power supply line noise: Built-in EMC class B filters. Reduction in generated pollution: Switching frequency of 16 khz. Dough mixers Perfect control of this motor drive application: Without tripping as the dough hardens. Protection of personnel: Due to the low leakage current of the Altivar 11, the drive can be associated with a 30 ma differential circuit-breaker. This also includes models with a built-in EMC class B filter. Conveyors Tailored ergonomics, as near to the operator as possible: Simple setting-up using local controls: start / stop buttons and potentiometer for setting speed available on the drive.

Identical performance to the Greats Total control of your machines: Optimal management of the motor due to flux vector control: 150% of the

Ability to catch a spinning load after a supply break or on a start command for smooth take-up of a rotating machine.

Uninterrupted service High degree of monitoring and protection at all levels: Robustness to meet every challenge Even in severe environments

Of the motor thermal protection by continuous calculation of I 2 t.

4 Identical performance to the Greats Total control of your machines: Optimal management of the motor due to flux vector control: 150% of the nominal current of the drive during 60 seconds with a 1:20 speed ratio. Ability to catch a spinning load after a supply break or on a start command for smooth take-up of a rotating machine. Dynamic braking possible, even for high inertia and unbalanced load applications. Uninterrupted service High degree of monitoring and protection at all levels: Robustness to meet every challenge Even in severe environments from -10 up to +50 C, the Altivar 11 is perfectly operational without any degradation in its performance. Of the motor thermal protection by continuous calculation of I 2 t. Of the drive thermal protection by PTC probe integrated in the power module, protection against short-circuits between output phases. safety related to the supply line: - overvoltage, - undervoltage, - phase failure (on 3-phase) Of personnel Due to the low leakage current of the Altivar 11, the drive can be associated with a 30 ma differential circuit-breaker. This also includes models with a built-in EMC class B filter.

mounting several drives side by side. Through wiring and connection using captive screws simplify installation and replacement of electromechanical solutions.

Example of assigning operating functions to a single logic input Multi-assignment of logic inputs (several functions on the same input) increases tenfold its application capabilities.

5 The smallest drive in the world! Perfect suitability for any application The compactness of the Altivar 11 considerably reduces the size of your enclosures and, in addition, reduces the size yet again due to the possibility of mounting several drives side by side. Through wiring and connection using captive screws simplify installation and replacement of electromechanical solutions. DIN rail mounting option also contributes to additional savings in installation time. Example of assigning operating functions to a single logic input Multi-assignment of logic inputs (several functions on the same input) increases tenfold its application capabilities. The closest possible to machines... The Altivar 11 could not be closer to your machine: it can be installed directly on its framework (version on baseplate). The use of natural convection up to 0.75 kw makes them ideal where silent operation is necessary. International coverage Current NEC 208 V 1999 (North America). Built-in EMC class B filter (Europe). Local controls and negative logic. (Asia). The Altivar 11 has its place anywhere in the world: its ranges are suitable for the technical requirements and standards of all the markets.

With total simplicity and user-friendliness Wire it, connect it,

Customise your settings with the minimum of effort The built-in

configuration. Does your application require particular settings?

of your motor application, configure the specific functions of

the Altivar 11 and subsequently recalled.

to its user-friendliness and ergonomics for adjusting and storing

6 With total simplicity and user-friendliness Wire it, connect it, start Factory set, the Altivar 11 is operational immediately. Customise your settings with the minimum of effort The built-in display guides you through the main parameters for fast configuration. Does your application require particular settings? 3 simple and intuitive menus allow you to: adjust the parameters of your motor application, configure the specific functions of your machine, select the value indicated on the display of the drive. For improved security, your settings can be automatically saved on the Altivar 11 and subsequently recalled. Protect everything in memory with PowerSuite* software In addition to its user-friendliness and ergonomics for adjusting and storing your parameters, PowerSuite allows the back-up of each configuration. This, in turn, can be quickly recalled and used for similar applications without the risk of error. * Software which is common to the Altivar range of variable speed drives. Available in 5 languages (English, French, German, Italian, Spanish).

8 ATV 11HU29M2E 2.2 9.6 ATV 11HU41M2E Dimensions (in mm) ATV11.

7 Altivar 11 selection guide Variable speed drives with heatsink - 50 / 60 Hz «Europe» range Built-in EMC class B filter. Motor power Permanent output current Reference kw A 3-phase Supply voltage : 200 to 240 V ATV 11HU05M2E ATV 11HU09M2E * ATV 11HU12M2E * ATV 11HU18M2E * ATV 11HU29M2E ATV 11HU41M2E Dimensions (in mm) ATV11... w h d ** HU05 M2 / M3 / F HU09 M2 / M3 / F HU12 M HU18 M2 / M HU18 F HU29 M2 / M HU41 M2 / M On baseplate PU M2 / M3 / F w : width / h : height / d : depth «America» range. Permanent output current conforming to the standard NEC 208 V External EMC class B filter as option. Motor power Permanent output current Reference kw HP A Single-phase 3-phase Supply voltage : 100 to 120 V ATV 11HU05F1U ATV 11HU09F1U* ATV 11HU18F1U - Supply voltage : 200 to 240 V 200 to 230 V ATV 11HU05M2U ATV 11HU05M3U ATV 11HU09M2U * ATV 11HU09M3U * 0, ATV 11HU18M2U * ATV 11HU18M3U * ATV 11HU29M2U ATV 11HU29M3U ATV 11HU41M2U ATV 11HU41M3U «Asia» range. Local controls on the drive and negative logic. External EMC class B filter as option. Motor power Permanent output current Reference kw A Single-phase 3-phase Supply voltage : 100 to 120 V ATV 11HU05F1A ATV 11HU09F1A * ATV 11HU18F1A - Supply voltage : 200 to 240 V 200 to 230 V ATV 11HU05M2A ATV 11HU05M3A ATV 11HU09M2A * ATV 11HU09M3A * ATV 11HU18M2A * ATV 11HU18M3A * ATV 11HU29M2A ATV 11HU29M3A ATV 11HU41M2A ATV 11HU41M3A * Replace the letter " H " by " P " to obtain the reference of the version on a baseplate. ** Add 7 mm to the depth for the Asia range.

8 A comprehensive range of Motor Starters Variable speed drives Increase your performance with the associated TeSys components* Circuit-breakers, Altivar to 2.2 kw Altivar to 315 kw Differential circuit-breakers, Contactors. Altivar to 15 kw *For further details on product combinations, please refer to our catalogue. Altivar to 75 kw Altivar to 630 kw A unique partner, a global presence Soft start - soft stop units Constantly available, worldwide. With more than 5000 points of sale in 130 countries, you can be sure to find the range of products which is right for you and which complies totally with the standards in the country in which they are to be used. LH4 6 to 85 A Altistart to 1200 A Schneider Electric Services Our services, near you, wherever you are. Our experts are at your disposal, working with you to design your customised solution. Our aim: to optimise your installations and improve your industrial performance. Schneider Electric Industries S.A.S Head office 89 boulevard Franklin Roosevelt Rueil Malmaison Cedex FRANCE Owing to changes in standards and equipment, the characteristics given in the text and images in this document are not binding until they have been confirmed with us. Production: 3000 NR Photos: Schneider Electric - ImageBank 06/2002 VVDED102051EN

Soft starters Altistart 01 The starting solution

Soft starters Altistart 01 The starting solution For single-phase and 3-phase asynchronous motors from 0.37 to 75 kw /3to85A. Altistart 01 Welcome to the Simply Smart* world, compliments of Telemecanique...