LeTourneau Technologies 3592 / 3594 Log Stacker Specifications, 3/11. Note: Optional equipment may be shown in photo.

Size: px
Start display at page:

Download "LeTourneau Technologies 3592 / 3594 Log Stacker Specifications, 3/11. Note: Optional equipment may be shown in photo."

Transcription

1 3592 & 3594 Log Stackers Two & Four Wheel Drive 70,000 lbs. (31,752 kgs) Operating Lift Capacity 24 ft., ( m) Lift Height (Highest of any comparable machines) Note: Optional equipment may be shown in photo.

2 POWER ENGINES DETROIT DIESEL ENGINE Model Series 60 STANDARD Front Tier 3, D-DEC 5 Rear, 3592 Rated Brake HP BHP Rear, RPM TIRES AND WHEELS x Ply, E x Ply, L x Ply, E - 3 OPTIONAL CUMMINS DIESEL ENGINE Front Model QSX - 15 Front Rated Brake HP 2100 RPM HP kw Front (Smooth) Rear, 3592 (Smooth) Rear, 3594 (Smooth) Rear, 3594 POWER TRAIN 3592 SL TWO WHEEL DRIVE 4B AC Generator, (400 kw) Operating Brake Dynamic Regenerative Electric N-11 DC Traction Motors, 200 HP (Front) Service Brake Air Caliper / Disc. N3-TL Drivers, Ratio 58.39:1 (Front) Parking Fail Safe Air Caliper / Disc - STD LeTourneau Solid State AC-DC Phase Controls Hoist Fail Safe Air Caliper / Disc - STD 3594 SL FOUR WHEEL DRIVE 7B AC Generator, (700 kw) N-11 DC Traction Motors, 200 HP (Front) C-10 DC Traction Motors, 100 HP (Rear) Front N3-TL Drivers, Ratio 58.39:1 (Front) Rear N3-TL Drivers, Ratio 58.39:1 (Rear) LeTourneau Solid State AC-DC Phase Controls 24 VOLT DC ELECTRIC SYSTEM BRAKES x Ply, E x Ply, L - 3 / E x Ply, L x Ply, L x Ply, L x Ply, E - 4 Rigid Oscillating Batteries Two (2) 12 - Volt Fuel Tank 268 gallons 1,014 liters Alternator 24 - Volt DC 75 Amp Driver (Front) 7 gallons 26.5 liters Driver (Rear) 7 gallons 26.5 liters Hydraulic Steering 25 gallons 94.5 liters AC POWER SYSTEM POWER SYSTEM AC Motor HP KW Hoist (Two Speed) # 5 AC ESTIMATED FUEL AGE (3592) Tilt # 3 AC Tusk # 3 AC * Estimated average usage 7 GPH 26.5 LPH, Kicker # 2 AC HYDRAULIC STEERING AXLES SERVICE REFILL CAPACITIES ESTIMATED FUEL AGE (3594) Rack and Pinion with Hydraulic Motor * Estimated average usage 8 GPH 30 LPH Piston Pump 30 GPM LPM * Lowest fuel usage of any comparable size machines. (Less fuel burned results in better air quality by reducing the amount of carbon dioxide emissions, and resulting in a smaller carbon footprint. Also, less fuel burned results in a longer engine life.) Page 2

3 OPERATING CAPACITIES, WEIGHTS AND DIMENSIONS Operating Capacity 70,000 lbs. 31,751 kgs Operating Weight (approximate) 135,000 lbs. 61,236 kgs Lift Height 24' - 0" 7.32 m Lifting Speed (High Speed) 60 FPM m / min Lowering Speed (High Speed) 75 FPM m / min Forward Tilt at Maximum Height Rear Tilt at Maximum Height Travel Speed (Standard) MPH KPH (Forward and Reverse Infinity Variable) Turning 65 degrees Outside Rear Tire 26' - 7" 8.10 m Outside Front Tire 20' -6" 6.25 m Tusk Opening (Max to Fork Tip) 14' - 6" 4.42 m Clearance Under Tusk (Closed) 9' - 6" 2.90 m STANDARD CONFIGURATION ( A ) Overall Length (Mast Vertical) 43' - 5" m ( B ) Wheelbase 22' - 0" 6.71 m ( C ) Overall Height (Minimum 24' - 0" Lift) 34' - 0" m ( D ) Lift Height 24' - 0" 7.32 m ( E ) Mast Tilt Forward 25 ( F ) Mast Tilt Rear 12 ( G ) Overall Width (Outside Tires) - Front 14' - 7" 4.44 m ( H ) Turning Radius 26' - 7" 8.10 m ( I ) Overall Width (Outside Tires) - Rear 12' - 2" 3.71 m ( J ) Fork Length (Usable) 8' - 9" 2.67 m ( K ) Fork Spacing (Outside to Outside) 8' - 4" 2.53 m ( L ) Fork Width, Standard 10".83 m ( M ) Tusk Opening (Maximum to Fork Tip) 14' - 6" 4.42 m ( N ) Clearance Under Tusk, Standard (Closed) 9' - 6" 2.90 m Clearance Under Tusk, Optional Hi-Cube (Closed) 11' - 6" 3.53 m Minimum Ground Clearance (Mast) 1' - 1".33 m Page 3

4 STANDARD EQUIPMENT OPERATOR'S CAB Universal Control Center (Joystick Control) Standard Control Center (In lieu of Joystick Control) Defroster Fans (2) Air Horn Foot Rest Cab Heater (Electric) Illuminated Instrument Panels Insulated Deluxe Cab Radio, AM / FM, CD Player Adjustable Air Seat and Suspension / Seat Belt Windshield Wipers (Two Speed) Air Hose in Cab GAUGES Air Cleaner Restriction Air Pressure Engine Coolant Temperature Engine Oil Pressure Hour - Meter / Voltmeter (Battery Charge) Murphy Engine Gauge Hydraulic Tank Level Gauge INDICATORS AND ALARMS Amber Indicators: Check Engine - Detroit Diesel and Cummins Dynamic Braking Service Brake Audible Alarm: Blower Motor Failure Converter System Failure Engine Warning (Low Oil Pressure, Hi-Coolant Temp) System Air Pressure (Low) Red Indicators: Blower Motor Failure Converter System Failure Engine Warning (Low Oil Pressure, Hi-Coolant Temp) Low Fuel Warning Stop Engine - Detroit Diesel Only ELECTRICAL 400 KW AC Generator (2 - wheel, Air cooled) 700 KW AC Generator (4 - wheel, Air cooled) AC Work Lights (5-500W) Armature Converters (Parallel) Back Up Alarm Back Up Lights Contactor (AC), IEC (Tusk, Kicker, Steer, Tilt, Hoist) DC Motors, 200 HP-Front / 100 HP-Rear (Air Cooled) Diagnostic Test Meter Dual Field Converters (4 - wheel) Tusk Motor Overload Cutout STANDARD EQUIPMENT (CONTINUED) ELECTRICAL (CONTINUED) Two Speed Hoist with Air Disc Brake Steering Assist (Electronic) ENGINE ACCESSORIES 24 Volt Electrical System Two - Stage Dry Air Cleaner Engine Fuel Filter (Spin - On) Engine Oil Filter (Spin - On) Fan Clutch STRUCTURAL 24' - 0" Lift Height Rail Powered Tilt Engine Hood Service Platform (Cab, Hoist, Tilt and Control Box) Tusk (Curved) Tilt Rack Grease Gutter OPTIONAL EQUIPMENT OPERATOR'S CAB Red Dot Air Conditioner (Roof Mounted) Fire Extinguisher Sun Visors (Front and Rear) Windshield Wipers (Intermittent) Tilt Operator's Console (Standard Control Center) Cab Heater (Water) ELECTRICAL Additional AC Light (500W) Beacon (Amber, Blue, or Red) Electrical Outlet, Cab (120VAC) Emergency Stop (Two Actuators) Heaters (Battery) Overload Cutout (Hoist, Kicker) Strip Heaters (Cabinet, Axles) Turn Signals Electric Hoist Brakes ENGINE ACCESSORIES Heaters (Oil and Water) 110 VAC or 230 VAC STRUCTURAL Positive Arm Kickers Service Platform and Ladder (Tusk) Tusk (Straight) Hi-Cube Carriage Assembly GENERAL Ansul 4 Nozzle Fire Suppression System Auto Lube System (Frame Only, or Full Machine) LeTourneau Technologies, America, Inc. has made every effort to make these specifications as accurate as possible. However, we reserve the right to make changes and improvements in equipment, materials, and specifications at any time without notice. To insure most current information, please contact your LeTourneau representative. Troutdale, OR Coeur d' Alene, ID Lakewood, WA Prince George, BC Redding, CA Fax: letourneautechnologies.comcom Page 4

5 Page 5

LeTourneau Technologies JC-52KP Jib Crane Specifications, 3/11. Note: Optional equipment may be shown in photo.

LeTourneau Technologies JC-52KP Jib Crane Specifications, 3/11. Note: Optional equipment may be shown in photo. JC-52KP Jib Crane Standard Boom Length: 120' (36.58 m) Lift Capacity: 52,000 lbs. (23,587 kgs) Optional Boom Length: 100' (30.48 m) Lift Capacity: 56,000 lbs. (25,402 kgs) Optional Boom Length: 150' (45.72

More information

534E WHEEL LOADER. Bucket Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Net Horsepower 169 kw (227 hp) Operating Weight kg (45,917 lb)

534E WHEEL LOADER. Bucket Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Net Horsepower 169 kw (227 hp) Operating Weight kg (45,917 lb) 534E WHEEL LOADER Net Horsepower 169 kw (227 hp) Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Operating Weight 20828 kg (45,917 lb) The best in the business for productivi features and a wide choice

More information

534E LA LANDFILL COMPACTOR. Operating Weight - w/ blade kg (50,485 lb) - w/ bucket kg (53,351 lb) Net Horsepower 169 kw (227 hp)

534E LA LANDFILL COMPACTOR. Operating Weight - w/ blade kg (50,485 lb) - w/ bucket kg (53,351 lb) Net Horsepower 169 kw (227 hp) 534E LA LANDFILL COMPACTOR Net Horsepower 169 kw (227 hp) Compaction ratio 1 : 3.5 Operating Weight - w/ blade 22 900 kg (50,485 lb) - w/ bucket 24 200 kg (53,351 lb) The best in the business for productivity

More information

DL250TC TECHNICAL DATA

DL250TC TECHNICAL DATA DL250TC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED

More information

DL250 TECHNICAL DATA

DL250 TECHNICAL DATA DL250 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED

More information

MSV. Innovating for you

MSV. Innovating for you MSV Innovating for you Innovating for you - A new generation of multi-service vehicles CAB SAFETY Operators enclosure is ROPS certified to SAE J 1040C and ISO 3471 at 12,000 lbs. IN CONTROL Sure Grip Controls

More information

Doosan Infracore DL220 TECHNICAL DATA

Doosan Infracore DL220 TECHNICAL DATA Doosan Infracore Construction Equipment DL220 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 148 / 2,200 (GROSS)

More information

LX80. Note: General purpose bucket with bolt on cutting edges. I J K. Unit : mm

LX80. Note: General purpose bucket with bolt on cutting edges. I J K. Unit : mm S P E C I F I C A T I O N S LX80 W H E E L L O A D E R n Engine Rated Power : 80.9 kw (110 PS) n Operating Weight : Canopy / (Rops / Fops) Cab 8 120 kg / 8 610 kg n Backhoe Bucket : ISO Heaped - 1.9 40

More information

Multi-Service Vehicle Engine Specifications

Multi-Service Vehicle Engine Specifications This specification describes a high performance, articulated side walk tractor that shall support a variety of attachments. The versatility is required to allow operation in all four seasons of the year.

More information

9.50M BACKHOE LOADER. Net Horsepower 70 kw (95 hp) Digging depth, boom retracted 4760 mm (15'7") Digging depth, boom extended 5860 mm (19'3")

9.50M BACKHOE LOADER. Net Horsepower 70 kw (95 hp) Digging depth, boom retracted 4760 mm (15'7) Digging depth, boom extended 5860 mm (19'3) 9.50M BACKHOE LOADER Net Horsepower 70 kw (95 hp) Operating Weight 8900 kg (19,621 lb) Digging depth, boom retracted 4760 mm (15'7") Digging depth, boom extended 5860 mm (19'3") Safe ROPS/FOPS operator

More information

DL350 TECHNICAL DATA

DL350 TECHNICAL DATA DL350 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL08 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER (GROSS) hp / rpm 232 / 2,000 (SAE J1995) kw / rpm 172 / 2,000 RATED

More information

CRAWLER DOZER. Blade Capacity up to 27.5 yd 3 (21 m 3 ) Operating Weight 91,491 lb ( kg) Net Horsepower 330 hp (246 kw)

CRAWLER DOZER. Blade Capacity up to 27.5 yd 3 (21 m 3 ) Operating Weight 91,491 lb ( kg) Net Horsepower 330 hp (246 kw) TD-25M CRAWLER DOZER Net Horsepower 330 hp (246 kw) Blade Capacity up to 27.5 yd 3 (21 m 3 ) Operating Weight 91,491 lb (41 500 kg) Motion and Blade Controls The speed ranges, machine direction changes

More information

SLSERIES - LP12. Scissorlift Vehicle AT A GLANCE OPTIONS FEATURES & BENEFITS. High speed / high mobility underground scissorlift vehicle.

SLSERIES - LP12. Scissorlift Vehicle AT A GLANCE OPTIONS FEATURES & BENEFITS. High speed / high mobility underground scissorlift vehicle. SLSERIES - LP12 Scissorlift Vehicle AT A GLANCE Weights & Dimensions: Operating Weight Overall Tramming Length Overall Width 31,000 lbs (14,091 kg) 27-2 (8.29 m) 7-0 (2.13 m) Tramming Height Carrier Articulation

More information

HIGH-CAPACITY IC PNEUMATIC

HIGH-CAPACITY IC PNEUMATIC HIGH-CAPACITY IC PNEUMATIC 22000 72000 LBS. REACH NEW S SPECIFICATIONS THD 2200 7200 CLASS 5 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE ToyotaForklift.com HIGH-CAPACITY IC PNEUMATIC CAPACITY 22000 72000

More information

HIGH-CAPACITY IC PNEUMATIC

HIGH-CAPACITY IC PNEUMATIC HIGH-CAPACITY IC PNEUMATIC REACH NEW HEIGHTS 22000 51000 LBS. SPECIFICATIONS 50-4FD100-135 50-4FDK150-160 4FD150-230 CLASS 5 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE ToyotaForklift.com HIGH-CAPACITY IC

More information

40,8 kw / 54,7 Hp at rpm kg mm. DX55w. Compact Equipment

40,8 kw / 54,7 Hp at rpm kg mm. DX55w. Compact Equipment 40,8 kw / 54,7 Hp at 2.400 rpm 5.550 kg 3.495-3.795 mm DX55w Compact Equipment Doosan DX55w hydraulic excavator: a new model with novel features The new DX55w hydraulic excavator offers additional value

More information

SKID STEER LOADER From World First to World Leader

SKID STEER LOADER From World First to World Leader TS80V2 SKID STEER LOADER From World First to World Leader Product Features & Specifications ENGINE - Four Cylinder Turbocharged Deutz Diesel Engine - U.S EPA Final Tier 4 Emission Compliant - Maintenance

More information

TS80V2 Skid Steer Loader

TS80V2 Skid Steer Loader Those in the know, know Takeuchi TS80V2 Skid Steer Loader TS50R TS50V TS60R TS60V TS80R2 TS80V2 Product Features & Specifications ENGINE --Four Cylinder Turbocharged Deutz Diesel Engine -U.S. - EPA FINAL

More information

DX420LC TECHNICAL DATA

DX420LC TECHNICAL DATA DX420LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DV11 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 293 / 1,800 (hp PER SAE J1995) GROSS kw

More information

TS80V2 Skid Steer Loader

TS80V2 Skid Steer Loader Those in the know, know Takeuchi TS80V2 Skid Steer Loader TS50R TS50V TS60R TS60V TS80R2 TS80V2 Specifications TOUGH, POWERFUL, RELIABLE Pressure Relieving Coupler Flat Faced Couplers High Flow Hydraulics

More information

Mini Hydraulic Excavator

Mini Hydraulic Excavator 302.5 Mini Hydraulic Excavator Cat 3013 Naturally Aspirated Diesel Engine Flywheel Power 17.1 kw 22.9 hp Operating Weight With canopy 2660 kg 5864 lb With cab 2783 kg 6135 lb 302.5 Mini Hydraulic Excavator

More information

Technical Specifications

Technical Specifications 140 Motor Grader Technical Specifications Engine Engine Model Cat C9.3 Net Power ISO 9249/SAE J1349 186 kw 250 hp Net Power EEC 80/1269 186 kw 250 hp Net Power All-Wheel Drive (AWD) 201 kw 270 hp VHP Plus

More information

145 HP, FRONT WHEEL ASSIST TRACTOR 3/17/15 Page 1. Mountrail County Road and Bridge SPECIFICATIONS FOR

145 HP, FRONT WHEEL ASSIST TRACTOR 3/17/15 Page 1. Mountrail County Road and Bridge SPECIFICATIONS FOR Page 1 Mountrail County Road and Bridge S FOR Bidder's Instructions: Indicate compliance to the specifications on the YES/NO line by each specification. Indicate any deviations from the specifications

More information

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,

More information

GALLATIN PUBLIC UTILITIES

GALLATIN PUBLIC UTILITIES GALLATIN PUBLIC UTILITIES Bid Proposal Item: Single Axle Dump Truck Bid Date: Company Address: Phone Number: Manufacturer: Bid Information (1) Prices F.O.B., 249 Hancock Street, Gallatin, Tennessee 37066.

More information

FRESIA F2000 MULTI-FUNCTION SNOW SWEEPER

FRESIA F2000 MULTI-FUNCTION SNOW SWEEPER FRESIA F2000 MULTI-FUNCTION SNOW SWEEPER Technical Description Fresia F2000 Main Features - Compact design with increased maneuverability and safety compared to standard tow behind sweeper and front-mounted

More information

Voyager MDR-235 Four Track Articulated Carrier Specifications

Voyager MDR-235 Four Track Articulated Carrier Specifications DIMENSIONS FOR COMBINED VEHICLE (2 SECTIONS) Overall Length 385" (9.78 m) Overall Width 99" (2.51 m) without mirrors Overall Height 109" (2.77 m) Ground Clearance 18" (45.7 cm) Curb Weight Payload GVWR

More information

PRODUCT LINE WHEELBASE & CAPACITIES

PRODUCT LINE WHEELBASE & CAPACITIES PRODUCT LINE WHEELBASE & CAPACITIES TX-4030 (30,000-lb. Cap. at 36" L.C., 132" WB) Rigger Application: 40,000-lbs. Cap. at 36 L.C. if traveling less than 1 mph up to 48-in. lift. Truck is shown with available

More information

FLSERIES - LP12. Fuel Lube Vehicle AT A GLANCE OPTIONS FEATURES & BENEFITS. High speed / high mobility underground fuel lubrication vehicle.

FLSERIES - LP12. Fuel Lube Vehicle AT A GLANCE OPTIONS FEATURES & BENEFITS. High speed / high mobility underground fuel lubrication vehicle. FLSERIES - LP12 Fuel Lube Vehicle AT A GLANCE Weights & Dimensions: Operating Weight Overall Tramming Length Overall Width 27,000 lb (12,273 kg) 27-2 (8.3 m) 7-0 (2.13 m) Tramming Height Carrier Articulation

More information

Doosan Infracore DX225LL TECHNICAL DATA

Doosan Infracore DX225LL TECHNICAL DATA Doosan Infracore Construction Equipment DX225LL TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 155 / 1,900 (hp PER SAE J1995)

More information

Truck Specs. Sabre 9 Off-Highway GCWR: 242,000. CapacityTrucks.com

Truck Specs. Sabre 9 Off-Highway GCWR: 242,000. CapacityTrucks.com Truck Specs Sabre 9 Off-Highway GCWR: 242,000 CapacityTrucks.com Sabre 9 / Off-Highway - Base Model Base Model Sabre 9 / Off-Highway Basic Overview GCWR: 242,000 Basic Overview Axle: 4x2 Basic Overview

More information

TS80V2 Ski d Steer Loader

TS80V2 Ski d Steer Loader TS80V2 Ski d Steer Loader Those in the know, know Takeuchi TS50R TS50V TS60R TS60V TS80R 2 TS80V 2 Product Features & Speciications ENGINE HYDRAULIC AND WORKING EQUIPMENT - Four Cylinder Turbocharged Deutz

More information

Doosan Infracore DX55W TECHNICAL DATA

Doosan Infracore DX55W TECHNICAL DATA Doosan Infracore Construction Equipment DX55W TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Yanmar 4TNV98-E NUMBER OF CYLINDERS 4 RATED FLYWHEEL POWER hp / rpm 56.8 / 2,400 (hp PER SAE

More information

SB-60M Extra ELECTRICAL ENGINE OPERATOR STATION COOLING OPERATING WEIGHTS OPTIONAL COMPONENTS HYDRAULICS PIPELAYER. EPA Tier 3/EU Stage IIIA STANDARD

SB-60M Extra ELECTRICAL ENGINE OPERATOR STATION COOLING OPERATING WEIGHTS OPTIONAL COMPONENTS HYDRAULICS PIPELAYER. EPA Tier 3/EU Stage IIIA STANDARD PIPELAYER EPA Tier 3/EU Stage IIIA STANDARD ENGINE Make and model Cummins QSM 11 ELECTRICAL Voltage 24 V Emissions Standard EPA Tier 3/EU Stage IIIA Number of batteries 4 Displacement 11l (671 in3) Battery

More information

SKID STEER LOADER From World First to World Leader

SKID STEER LOADER From World First to World Leader TS80R2 SKID STEER LOADER From World First to World Leader Product Features & Specifications ENGINE - Four Cylinder Turbocharged Deutz Diesel Engine - U.S. EPA FINAL TIER 4 Emission Compliant - Maintenance

More information

Invitation to Tender. District of Taylor MOTOR GRADER

Invitation to Tender. District of Taylor MOTOR GRADER Invitation to Tender District of Taylor MOTOR GRADER Sealed tenders clearly marked Motor Grader will be received by the District of Taylor up to 2:00 pm, local time Wednesday, September 17, 2014 at Council

More information

Technical Specifications

Technical Specifications Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier Final HP (18 kw) 8,9 lb (8, kg) Reach

More information

TD-25M CRAWLER DOZER. Blade Capacity up to 21 m 3 (27.5 yd 3 ) Operating Weight kg (91,491 lb) Net Horsepower 246 kw (330 hp)

TD-25M CRAWLER DOZER. Blade Capacity up to 21 m 3 (27.5 yd 3 ) Operating Weight kg (91,491 lb) Net Horsepower 246 kw (330 hp) TD-25M CRAWLER DOZER Net Horsepower 246 kw (330 hp) Blade Capacity up to 21 m 3 (27.5 yd 3 ) Operating Weight 41 500 kg (91,491 lb) Motion and Blade Controls The speed ranges, machine direction changes

More information

HIGH-CAPACITY IC PNEUMATIC

HIGH-CAPACITY IC PNEUMATIC HIGH-CAPACITY IC PNEUMATIC 22000 72000 LBS. REACH NEW S SPECIFICATIONS THD2200-7200 CLASS 5 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE ToyotaForklift.com HIGH-CAPACITY IC PNEUMATIC CAPACITY 22000 72000

More information

NEW 7A SERIES HYUNDAI WHEEL LOADER Applied Tier 3 Engine

NEW 7A SERIES HYUNDAI WHEEL LOADER Applied Tier 3 Engine Bucket Selection Guide Supplemental Specifications m 3 (yd 3 ) Bucket Capacity 7.0 (9.2) 6.5 (8.5) 6.0 (7.8) 5.5 (7.2) 5.0 (6.5) 4.5 (5.9) 4.0 (5.2) 1,400 1,600 1,800 2,000 2,200 2,400 kg/m 3 Description

More information

SB-30M PIPELAYER. Max Lifting Capacity kg (72,972 lb) Net Horsepower 140 kw (188 hp) Operating Weight kg (60,803 lb)

SB-30M PIPELAYER. Max Lifting Capacity kg (72,972 lb) Net Horsepower 140 kw (188 hp) Operating Weight kg (60,803 lb) SB-30M PIPELAYER Net Horsepower 140 kw (188 hp) Max Lifting Capacity 33 100 kg (72,972 lb) Operating Weight 27 580 kg (60,803 lb) The DRESSTA SB-30M Extra has been specifically designed to handle and lay

More information

555C WHEEL LOADER. Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Net Horsepower 238 kw (319 hp) Operating Weight kg (63,753 lb)

555C WHEEL LOADER. Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Net Horsepower 238 kw (319 hp) Operating Weight kg (63,753 lb) 555C WHEEL LOADER Net Horsepower 238 kw (319 hp) Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Operating Weight 28918 kg (63,753 lb) World class loader meeting high production requirements

More information

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross)

More information

RIGID TRUCK TR100. Features. Specifications. Maximum Gross Weight lbs ( kg)

RIGID TRUCK TR100. Features. Specifications. Maximum Gross Weight lbs ( kg) TR0 RIGID TRUCK Specifications Maximum Gross Weight 771 lbs (1190 kg) Gross Engine Power 0 hp (7 kw) Maximum Payload 0 tons (91 metric tons) Heaped Capacity 7. yd (7.0 m ) Features Rugged construction

More information

Technical Specifications SENNEBOGEN Rubber Tired Material Handler

Technical Specifications SENNEBOGEN Rubber Tired Material Handler Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Cummins QSB.-C Tier Final HP ( kw) Reach standard optional '" (. m) (stick pin) '" (

More information

JCB LOADALL / /

JCB LOADALL / / MAX PAYLOAD: 4,000 lb (1,814 kg) MAX LIFT HEIGHT: 13 ft 3 in (4.0 m) MAX HORSEPOWER: 49 hp (37 kw) B A 520-40 H D E C F G 520-40 STATIC DIMENSIONS 10.00 x 16.5 12 ply Tires 12.00 x 16.5 10 ply Tires A

More information

301.5, 301.6, Mini Hydraulic Excavator

301.5, 301.6, Mini Hydraulic Excavator 301.5, 301.6, 301.8 Mini Hydraulic Excavator 301.5 301.6 301.8 Cat 3003 Naturally Aspirated Diesel Engine Flywheel Power 13 kw 17.4 hp 13 kw 17.4 hp 13 kw 17.4 hp Operating Weight With canopy 1616 kg 3563

More information

TXB-250M. The master parts depot ships genuine TAYLOR parts nationwide and is a key component in the Sudden Service, Inc. dealer network.

TXB-250M. The master parts depot ships genuine TAYLOR parts nationwide and is a key component in the Sudden Service, Inc. dealer network. PRODUCT LINE WHEELBASE & CAPACITIES TXB-180S (18,000-lb. Cap. at 24" L.C., 110" WB) TXB-200S (20,000-lb. Cap. at 24" L.C., 110" WB) TXB-250M (25,000-lb. Cap. at 24" L.C., 121" WB) TXB-300L (30,000-lb.

More information

SB-30M Extra ELECTRICAL ENGINE OPERATOR STATION COOLING OPERATING WEIGHTS OPTIONAL COMPONENTS HYDRAULICS PIPELAYER. EPA Tier 3/EU Stage IIIA STANDARD

SB-30M Extra ELECTRICAL ENGINE OPERATOR STATION COOLING OPERATING WEIGHTS OPTIONAL COMPONENTS HYDRAULICS PIPELAYER. EPA Tier 3/EU Stage IIIA STANDARD PIPELAYER EPA Tier 3/EU Stage IIIA STANDARD ENGINE Make and model Cummins QSB 6.7 ELECTRICAL Voltage 24 V Emissions Standard EPA Tier 3/EU Stage IIIA Number of batteries 2 Displacement 6.7l (408 in3) Battery

More information

IC-200-F. Tech Spec. Unmatched in Features and Performance

IC-200-F. Tech Spec. Unmatched in Features and Performance Tech Spec IC-2-F Unmatched in Features and Performance * Rated Capacity Limiter...Standard * Capacity on outriggers..., lbs. * Pick and carry capacity... up to 17, lbs. * Height...7 11-1/2 * Width...8

More information

ROUGH TERRAIN CARRIER

ROUGH TERRAIN CARRIER ROUGH TERRAIN CARRIER 95B, 95B, & 595B TIER FINAL - SPECIFICATIONS The Rough Terrain Carrier (RTC) loader package is the most maneuverable and powerful log loading machine in the Barko lineup, providing

More information

DX140LC TECHNICAL DATA

DX140LC TECHNICAL DATA DX140LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 98.6 / 1,850 (hp PER SAE J1995) GROSS

More information

TD-8R ENGINE COOLING OPERATOR STATION ELECTRICAL HYDRAULICS CRAWLER DOZERS. EPA Tier 3/EU Stage IIIA STANDARD, LGP TD-8R TD-8R.

TD-8R ENGINE COOLING OPERATOR STATION ELECTRICAL HYDRAULICS CRAWLER DOZERS. EPA Tier 3/EU Stage IIIA STANDARD, LGP TD-8R TD-8R. CRAWLER DOZERS EPA Tier 3/EU Stage IIIA STANDARD, LGP ENGINE Make and model Emissions standard Displacement Bore and stroke Gross horsepower, SAE J1995 Cummins QSB3.3 EPA Tier 3/EU Stage IIIA 3.3 l (199

More information

TXB-250M PRODUCT LINE WHEELBASE & CAPACITIES. (30,000-lb. Cap. at 24" L.C., 140" WB)

TXB-250M PRODUCT LINE WHEELBASE & CAPACITIES. (30,000-lb. Cap. at 24 L.C., 140 WB) PRODUCT LINE WHEELBASE & CAPACITIES TXB-180S TXB-200S TXB-250M TXB-300L (18,000-lb. Cap. at 24" L.C., 110" WB) (20,000-lb. Cap. at 24" L.C., 110" WB) (25,000-lb. Cap. at 24" L.C., 121" WB) (30,000-lb.

More information

NEW 7 SERIES MINI EXCAVATOR. Yanmar 4TNV94L Engine. Bucket capacity, SAE 0.07~0.18m 3 (0.09~0.24yd 3 ) R55W-7_taal_en :20 Pagina 1

NEW 7 SERIES MINI EXCAVATOR. Yanmar 4TNV94L Engine. Bucket capacity, SAE 0.07~0.18m 3 (0.09~0.24yd 3 ) R55W-7_taal_en :20 Pagina 1 R55W-7_taal_en 05-09-2005 15:20 Pagina 1 NEW 7 SERIES MINI EXCAVATOR Yanmar 4TNV94L Engine 42kW/57HP Operating weight 5,450 (12,020 ) Bucket capacity, SAE 0.07~0.18m 3 (0.09~0.24yd 3 ) Photo may include

More information

121F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED

121F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED 121F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Type FPT F5H FL463 C*F001 Tier 4 Final 4-stroke Cylinders 4 Bore/ 3.9 x 4.3 in (99 x 110 mm) Displacement 207 in 3

More information

140H. Motor Grader. Global Version. Cat 3176 ETA Engine. Weights. Variable Horsepower Arrangement. Moldboard. Variable Horsepower Plus Arrangement

140H. Motor Grader. Global Version. Cat 3176 ETA Engine. Weights. Variable Horsepower Arrangement. Moldboard. Variable Horsepower Plus Arrangement 140H Motor Grader Global Version Cat 3176 ETA Engine Base Power (all gears) 123 kw Variable Horsepower Arrangement - gears 1-3 123 kw - gears 4-8 138 kw Variable Horsepower Plus Arrangement - gears 1-3

More information

RAC EXPORT TRADING Germany Tel

RAC EXPORT TRADING Germany   Tel Technical Specification Kenworth 963S oilfield truck, new GAWR RATINGS Front Axle Weight Rating 40.000 Lb. 18.140 kg Rear Axle Weight Rating 150.000 Lb 68.030 kg Gross Vehicle Weight Rating 190.000 Lb.

More information

Suggested Spares Guide L90C-330

Suggested Spares Guide L90C-330 Suggested Spares Guide L90C-330 Consumables, Approximate 1 Year Supply (calculated at 2000 hours/year) On-Hand (Recommended) 238206 Hydraulic Oil 550 Gallons 219374 Grease (chassis) 35 Lbs 591654 Grease

More information

21F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED

21F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED 21F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Type FPT F5H FL463 B*F001 Tier 4 Final 4-stroke Cylinders 4 Bore/ 3.9 x 4.3 in (99 x 110 mm) Displacement 207 in 3 (3.4

More information

521F/XT/XR ARTICULATED

521F/XT/XR ARTICULATED 521F/XT/XR ARTICULATED WHEEL LOADER TIER 4 INTERIM CERTIFIED PRELIMINARY engine Model CNH CFPXL04.5SCB, F4HFE413J Tier4a/Stage 3b 4-stroke, turbocharged Type Cylinders 4 Bore/Stroke 4.09 in x 5.20 in (104

More information

TL12 Compact Track Loader

TL12 Compact Track Loader Those in the know, know Takeuchi TL12 Compact Track Loader TL8 TL10 TL12 TL12V2 Product Features & Specifications ENGINE - EPA Interim Tier 4 Compliant - Turbocharged and Intercooled - DOC+DPF Exhaust

More information

n Photo may include optional equipment HYUNDAI DIESEL FORKLIFT TRUCKS - Applied Tier 3 Engine 250D-7E

n Photo may include optional equipment HYUNDAI DIESEL FORKLIFT TRUCKS - Applied Tier 3 Engine 250D-7E n Photo may include optional equipment HYUNDAI DIESEL FORKLIFT TRUCKS - Applied Tier 3 Engine 250D-7E NEW criterion of Big Forklift Truck Hyundai introduces a new line of 7E-series diesel forklift trucks.

More information

Crawler Tractor PR 734-4

Crawler Tractor PR 734-4 Crawler Tractor PR 734-4 litronic` Engine output: 150 kw / 204 HP Operating weight: 17,960 20,000 kg Basic machine Engine Liebherr Diesel engine Rating (ISO 9249) Rating (SAE J1349) Rated speed Displacement

More information

Taylor Big Red THC Series Cushion Tire Lift Trucks

Taylor Big Red THC Series Cushion Tire Lift Trucks Taylor Big Red THC Series Cushion Tire Lift Trucks THC-300S THC-400L Features: Hydrostat Transmission and LP Engine options are available on some models Cummins Turbocharged diesel engines are standard

More information

TD-15M CRAWLER DOZER STD-LT-WT-LGP. Blade Capacity up to 5.95 m 3 (7.8 yd 3 ) Net Horsepower 142 kw (190 hp)

TD-15M CRAWLER DOZER STD-LT-WT-LGP. Blade Capacity up to 5.95 m 3 (7.8 yd 3 ) Net Horsepower 142 kw (190 hp) TD-15M CRAWLER DOZER STD-LT-WT-LGP Net Horsepower 142 kw (190 hp) Blade Capacity up to 5.95 m 3 (7.8 yd 3 ) Operating Weight 20110 kg (44,335 lb) STD 20260 kg (44,665 lb) LT 20765 kg (45,779 lb) WT 21070

More information

TD-15M CRAWLER DOZER STD-LT-WT-LGP. Blade Capacity up to 5.95 m 3 (7.8 yd 3 ) Net Horsepower 151 kw (202 hp)

TD-15M CRAWLER DOZER STD-LT-WT-LGP. Blade Capacity up to 5.95 m 3 (7.8 yd 3 ) Net Horsepower 151 kw (202 hp) TD-15M CRAWLER DOZER STD-LT-WT-LGP Net Horsepower 151 kw (202 hp) Blade Capacity up to 5.95 m 3 (7.8 yd 3 ) Operating Weight 20660 kg (45,547 lb) STD 20810 kg (45,878 lb) LT 21315 kg (46,991 lb) WT 21620

More information

SB-85R Extra ENGINE ELECTRICAL OPERATOR STATION OPERATING WEIGHTS COOLING OPTIONAL COMPONENTS HYDRAULICS PIPELAYER. EPA Tier 4f/EU Stage IV STANDARD

SB-85R Extra ENGINE ELECTRICAL OPERATOR STATION OPERATING WEIGHTS COOLING OPTIONAL COMPONENTS HYDRAULICS PIPELAYER. EPA Tier 4f/EU Stage IV STANDARD PIPELAYER EPA Tier 4/EU Stage IV STANDARD ENGINE Make and model Cummins QSX 15 ELECTRICAL Voltage 24 V Emissions Standard EPA Tier 4f/EU Stage IV Number of batteries 4 Displacement 15 l (915 in3) Battery

More information

ENGINE HYDRAULIC SYSTEM. TRANSMISSION 5 speed T/M 4 speed T/M Travel speed STEERING SYSTEM AXLES SERVICE REFILL CAPACITIES OVERVIEW CAB TIRES SOUND

ENGINE HYDRAULIC SYSTEM. TRANSMISSION 5 speed T/M 4 speed T/M Travel speed STEERING SYSTEM AXLES SERVICE REFILL CAPACITIES OVERVIEW CAB TIRES SOUND ENGINE Engine / Model Cummins / QSB6.7 Maximum Gross Power (2,200 rpm) SAE J1995 168 kw 225 hp Maximum Net Power (2,200 rpm) SAE J1349 166 kw 222 hp Peak Gross Torque (1,500 rpm) SAE J1995 1044 N m 770

More information

The Mining Truck T 252. Maximum Operating Weight: 331 t / 730,000 lbs Payload Class 181 t / 200 ton

The Mining Truck T 252. Maximum Operating Weight: 331 t / 730,000 lbs Payload Class 181 t / 200 ton The Mining Truck T 252 Maximum Operating Weight: 331 t / 730,000 lbs Payload Class 181 t / 200 ton Technical Data Manufacturer Wheel Motors Engine Engines available DDC/MTU Cummins Air cleaners L & M (Mesabi)

More information

WHEEL LOADER WHEEL LOADER. ZW series Parallel linkage tool carrier version

WHEEL LOADER WHEEL LOADER. ZW series Parallel linkage tool carrier version ZW series Parallel linkage tool carrier version WHEEL LOADER WHEEL LOADER Model Code: ZW140PL / ZW150PL / ZW1PL Operating Weight: ZW140PL: 11 950-12 010 ZW150PL: 13 370-13 400 ZW1PL: 15 240-15 430 Bucket

More information

JCB LOADALL , , SPEC COMPACT TELESCOPIC HANDLERS

JCB LOADALL , , SPEC COMPACT TELESCOPIC HANDLERS JCB LOADALL 520-40, 524-50, 527-55 SPEC COMPACT TELESCOPIC HANDLERS JCB LOADALL 520-40 MAX. PAYLOAD: MAX. LIFT HEIGHT: MAX. HORSEPOWER: 4000lb 13ft 3in 50hp B A JCB LOADALL 520-40 H D E C F G STATIC DIMENSIONS

More information

Flat-out value proven productivity, reliability, durability.

Flat-out value proven productivity, reliability, durability. RC120 COMPACTORS Flat-out value proven productivity, reliability, durability. A machine needs to work to earn its keep. Rhino Equipment Vibratory Soil Compactors are well equipped to perform a wide range

More information

litronic` Operating Weight: 80,350 83,000 lb Engine Output (SAE J1349): 201 HP / 150 kw Engine Output (ISO 9249): 204 HP / 150 kw

litronic` Operating Weight: 80,350 83,000 lb Engine Output (SAE J1349): 201 HP / 150 kw Engine Output (ISO 9249): 204 HP / 150 kw Log Loader A 934 C HD litronic` Operating Weight: 80,30 83,000 lb Engine Output (SAE J1349): 201 HP / 10 kw Engine Output (ISO 9249): 204 HP / 10 kw Technical Data Engine Rating per SAE J1349 201 HP (10

More information

815F Series 2 Soil Compactor

815F Series 2 Soil Compactor 8F Series Soil Compactor Engine Engine Model Cat C9 ACERT Gross Power 189 kw 3 hp Net Power 173 kw 3 hp Weights Operating Weight 7 kg 4,76 lb Shipping Specifications Weight 34 kg 44,83 lb Engine Engine

More information

IC-400-3A. Tech Spec. Industrial Crane. 25-Ton Max. Capacity (22,700 kg) Manufacturing Corp. Rated Capacity Limiter... Standard

IC-400-3A. Tech Spec. Industrial Crane. 25-Ton Max. Capacity (22,700 kg) Manufacturing Corp. Rated Capacity Limiter... Standard Tech Spec IC-400-3A Industrial Crane 25-Ton Max. Capacity (22,700 kg) Rated Capacity Limiter... Standard Capacity on Outriggers... 50,000 lbs (22,700 kg) Pick and Carry Capacity... up to 24,400 lbs (11,000

More information

S P E C I F I C A T I O N S

S P E C I F I C A T I O N S S P E C I F I C A T I O N S LX50 W H E E L L O A D E R Engine Rated Power : 44.1 kw (60 PS) Operating Weight : Canopy / Cab 4 695 kg (10 350 lb) / 4 845 kg (10 680 lb) Backhoe Bucket : ISO Heaped 0.6 m

More information

MOTOR GRADER 672D SIX-WHEEL DRIVE

MOTOR GRADER 672D SIX-WHEEL DRIVE 1 6 5 1 8 5 S A E N E T H O R S E P O W E R D MOTOR GRADER SIX-WHEEL DRIVE Specifications Engine Type................................. John Deere PowerTech TM 6068H; meets EPA Tier II non-road emissions

More information

524K WH / 544K WH. Hydraulically driven, proportionally controlled, fan aft of coolers. Engine Coolant Rating 34 deg. F ( 37 deg.

524K WH / 544K WH. Hydraulically driven, proportionally controlled, fan aft of coolers. Engine Coolant Rating 34 deg. F ( 37 deg. 524K WH / 544K WH Engine 524K WH 544K WH Manufacturer and Model John Deere PowerTech TM 6068H John Deere PowerTech E 6068H Non-Road Emission Standards Certified to EPA Tier 3 emissions Certified to EPA

More information

Technical Specifications SENNEBOGEN Rubber Tired Material Handler preliminary

Technical Specifications SENNEBOGEN Rubber Tired Material Handler preliminary Technical Specifications SENNEBOGEN Rubber Tired Material Handler preliminary Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier FInal 13 HP (97 kw), lb

More information

Dimensions. Optional Equipment. MINI EXCAVATOR Applied Tier 2 Engine PLEASE CONTACT

Dimensions. Optional Equipment. MINI EXCAVATOR Applied Tier 2 Engine PLEASE CONTACT Dimensions 1,650 986 Standard Equipment Working ranges ISO standard cabin Cabin ROPS(ISO 3471) FOPS(ISO 3449) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up

More information

Cat BACKHOE LOADER. breakout forces and aggressiveness in hard bank applications. to the operator while roading.

Cat BACKHOE LOADER. breakout forces and aggressiveness in hard bank applications. to the operator while roading. Cat F BACKHOE LOADER The Cat F Backhoe Loader delivers performance, increased fuel efficiency, superior hydraulic system and an all new operator station. The F features the following: Ergonomic Operator

More information

IC-35-D. Engineering Spec. Page 1 of 8 Date: June 2006

IC-35-D. Engineering Spec. Page 1 of 8 Date: June 2006 Engineering Spec IC-35-D Page 1 of 8 Replaces: Form HD14D Dated: May 24 BMC s IC-35-2D is a Self-Propelled Industrial Crane designed for in-plant lifting and material handling applications. It has special

More information

Performance Enhanced For stage IV MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. n Photo may include optional equipment

Performance Enhanced For stage IV MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. n Photo may include optional equipment Performance Enhanced For stage IV MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES n Photo may include optional equipment Your satisfaction is our priority! Hyundai introduces a new line of 9-series diesel

More information

From World First to World Leader

From World First to World Leader HYDRAULIC EXCAVATOR TB280FR From World First to World Leader Product Features & Specifications ENGINE - U.S. EPA Final Tier 4 Compliant - Turbocharged - DOC+DPF Exhaust After Treatment - Automatic Fuel

More information

M325B MH Wheeled Material Handler

M325B MH Wheeled Material Handler M2B MH Wheeled Material Handler Engine Engine Model 11 TA Net Flywheel Power 12 kw 18 hp Operating Specifications Maximum Reach. m.9 ft Cat Cab Riser 1.9 m.4 ft Weights Operating Weight 7 2 kg 82,4 lb

More information

MATERIAL HANDLER. MHL350 E TIER 4i. Specifications. Features. Operating weight 70,548-78,264 lbs ( t) Reach up to 52.

MATERIAL HANDLER. MHL350 E TIER 4i. Specifications. Features. Operating weight 70,548-78,264 lbs ( t) Reach up to 52. MHL35 E TIER 4i MATERIAL HANDLER Specifications Operating weight 7,548-78,264 lbs (32 35.5 t) Engine output 214 hp (16 kw) Reach up to 52.5 ft (16 m) Features Fuel efficient high output engine with a reduction

More information

7 SERIES MINI EXCAVATOR

7 SERIES MINI EXCAVATOR Dimensions 1,650 986 Standard Equipment 2,850 2,610 290 6,100 2,100 1,600 1,925 7 SERIES MINI EXCAVATOR ISO standard cabin Cabin ROPS(ISO 3471) FOPS(ISO 3449) TOPS(ISO 12117) All-weather steel cab with

More information

MASTER CHECK SHEET PARTS MANUAL INDEX

MASTER CHECK SHEET PARTS MANUAL INDEX 1 of 5 GENERAL INFORMATION SECTION 1 1-1 General - - - - - Master Check Sheets 80-035 How to Read Your Master Check Sheet 800137 Alphabetical Index 80-007A Procedure For Ordering Parts (WAGNER) 1-2 Operation

More information

40,7 kw / 54,6 Hp at rpm kg mm DX80R. Compact Equipment

40,7 kw / 54,6 Hp at rpm kg mm DX80R. Compact Equipment 40,7 kw / 54,6 Hp at 2.000 rpm 8.330 kg 4.180-4.675 mm DX80R Compact Equipment Doosan DX80R hydraulic excavator: a new model with novel features The new DX80R hydraulic excavator offers additional value

More information

TMS x 4 & 6 x 6

TMS x 4 & 6 x 6 TMS5 6 x 4 & 6 x 6 Dimensions 8' (2438) TAILSWING 11' 1" (3383) 7' 8" (2337) RET 13' 9-3/4" (4210) MID EXT ' (96) EXT Note: ( ) Reference dimensions in mm 16-3/4" (425) 43' 4" (13 8) OVERALL 10' 10" (32)

More information

Undercarriage. Lubricant and Coolant Capacity. Travel System

Undercarriage. Lubricant and Coolant Capacity. Travel System MATERIAL HANDLER Operating Weight: 76,49 lbs (8, kg) SAE Net Horsepower: with fan pump 49 HP (69 kw) without fan pump HP (97 kw) Swing Torque: 96,6 lbf-ft. (66. kn m) Engine Isuzu AH-6WGXYSS- Tier turbocharged

More information

1021F/XR. Transmission: 4F/ 3R Proportional w/ Electronic Control Module torque sensing autoshift /manual shift and modulation

1021F/XR. Transmission: 4F/ 3R Proportional w/ Electronic Control Module torque sensing autoshift /manual shift and modulation 1021F/XR WHEEL LOADER TIER 4 INTERIM CERTIFIED ENGINE Make Case / FPT Model F2CFE614C Tier 4 interim certified Type 4-stroke, turbocharged Cylinders 6-cylinder in-line Bore / Stroke 4.61 in x 5.31 in (177

More information

TD-25M PRELIMINARY CRAWLER DOZER. Blade Capacity up to 21 m 3 (27.5 yd 3 ) Operating Weight kg (79,873 lb) Net Horsepower 246 kw (330 hp)

TD-25M PRELIMINARY CRAWLER DOZER. Blade Capacity up to 21 m 3 (27.5 yd 3 ) Operating Weight kg (79,873 lb) Net Horsepower 246 kw (330 hp) TD-25M CRAWLER DOZER Net Horsepower 246 kw (330 hp) Blade Capacity up to 21 m 3 (27.5 yd 3 ) Operating Weight 36 230 kg (79,873 lb) PRELIMINARY 246 kw (330 hp) Cummins QSX15 engine meets EU Stage IIIA

More information

Technical Specifications SENNEBOGEN Rubber Tired Material Handler

Technical Specifications SENNEBOGEN Rubber Tired Material Handler Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier F 13 HP (97 kw),8 lb (3,9 kg) Reach

More information

volvo motor graders

volvo motor graders volvo motor graders MORE CARE. BUILT IN. SPECIFICATIONS Base operating weight - approximate Weights shown include enclosed low profile cab with ROPS, all operating fluids, operator and standard equipment.

More information

PRELIMINARY GREEN HYBRID. Technical Specifications SENNEBOGEN Rubber Tired Material Handler. Leading Through Innovation. Reach 69' (21 m) (stick pin)

PRELIMINARY GREEN HYBRID. Technical Specifications SENNEBOGEN Rubber Tired Material Handler. Leading Through Innovation. Reach 69' (21 m) (stick pin) Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Cummins QSL9, Tier Final HP ( kw) Reach standard optional ' (18 m) (stick pin) 9' (1

More information

PRELIMINARY. Technical Specifications SENNEBOGEN Rubber Tired Material Handler. Leading Through Innovation

PRELIMINARY. Technical Specifications SENNEBOGEN Rubber Tired Material Handler. Leading Through Innovation Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Cummins QSG1, Tier Net Power HP (1 kw) Reach standard optional '" (1. m) (stick pin) '8" (19.1

More information

H HDS SERIES TECHNICAL GUIDE

H HDS SERIES TECHNICAL GUIDE H400-450HDS SERIES TECHNICAL GUIDE WWW.HYSTER.COM H400-450HDS DIMENSIONS 4-21 4-35 4-1 4-1 4-5 4-4 4-2 4-7 4-31 4-32 1-8 1-9 4-19 4-20 Circled dimensions correspond to the line numbers on the tabulated

More information

TD-14M CRAWLER DOZER STD-LT-LGP. Blade Capacity up to 4.28 m 3 (5.6 yd 3 ) Net Horsepower 120 kw (160 hp)

TD-14M CRAWLER DOZER STD-LT-LGP. Blade Capacity up to 4.28 m 3 (5.6 yd 3 ) Net Horsepower 120 kw (160 hp) TD-14M CRAWLER DOZER STD-LT-LGP Net Horsepower 120 kw (160 hp) Blade Capacity up to 4.28 m 3 (5.6 yd 3 ) Operating Weight 15550 kg (34,282 lb) STD 16550 kg (36,486 lb) LT 17650 kg (38,911 lb) LGP Engine

More information