Dräger Workstar Flexothane / PVC Splash Suit

Transcription

1 Dräger Workstar Flexothane / PVC Splash Suit Chemical protection overalls are always used when it is important to protect a person s skin from harmful influences or hazardous, liquid substances. ST

2 02 Dräger Workstar Flexothane / PVC Benefits One-piece, reusable splash protective suits The splash protective overalls are available in two versions: The WorkStar Flexothanemade of lightflexiblewater vapour permeable materialis approved as Type 4 (spray-tight protective suit) and ideal for work with oilsgasoline, diesel or paint. The WorkStar PVC, made of comfortable and sturdy PVC-coated fabricis approved as Type 3 (fluid jet-tight protective suit) offers ideal protection against acids or during cleaning work. Versatile applications The one-piece, reusable overalls can be used with filter mask, compressed air breathing apparatus, or compressed airline system. Protected zipper The zipper runs down the middle of the front side and is protected by two plackets, which are also made of the suit material. Reusable Both protective suits can be washed and thereby reused. The WorkStar PVC can be handwashed at up to 30 C and the WorkStar Flexothane can be washed at up to 40 C in a washing machine with limited wash agitation. Five suit sizes Five different suit sizes are available (M, L, XL, XXL, XXXL).

3 Dräger Workstar Flexothane / PVC 03 System components Dräger HPS 7000 The Dräger HPS 7000 firefighter s helmet is in a class of its own, thanks to its innovative, sporty and dynamic design, ergonomic fit and components which make it a multifunctional system solution. It provides optimum protection during every operation. D D Dräger FPS 7000 The Dräger FPS 7000 full-face mask series sets new standards in terms of safety and wearing comfort. Thanks to its enhanced ergonomics and the availability of multiple sizes, it offers a large, optimized field of vision and a very comfortable, secure fit. Dräger PAS Lite For use in industrial applications where a simple, robust and easy to use breathing apparatus is required, the Dräger PAS Lite Self- Contained Breathing Apparatus (SCBA) combines reliability with comfort and performance. D D Dräger Comfort Vest Increased performance by up to four hours - without the need for elaborate preparation or logistics: when work gets hot, the Dräger Comfort Vest CVP 5220 is always ready to use as it delivers the cooling action itself. This means: no pre-freezing, no dipping into water, no risk due to dangerous circulating air - and no time loss.

4 04 Dräger Workstar Flexothane / PVC Accessories Nitrile-P boots Firefighter s boots with toecaps, provide excellent protection against penetration, cutting and abrasion. Extra comfortable, in sizes 43 to ST PVC boots Safety boots made from PVC with steel toecap and steel sole in sizes 43 to 48. Gas-tight gloves Made from Viton or Viton /Butyl, in sizes 9 to 11. ST ST Cotton gloves Optional glove for hygienic wear under chemical protection gloves.

5 Dräger Workstar Flexothane / PVC 05 Accessories Tricotril Over gloves Can be worn over protective gloves, if required. ST Related Products Dräger Protec Plus TC and TF Chemical protection coveralls are used whenever and wherever a person s skin has to be protected from the harmful effects of hazardous substances. If there is a risk that the entire body could come into contact with solid or liquid chemicals, complete coveralls are the only way of ensuring full protection. ST ST Dräger SPC 3800 Chemical protective suits are used whenever and wherever a person s skin has to be protected from the harmful effects of hazardous liquids. If there is a risk that the entire body may come into contact with solid or liquid chemicals, complete coveralls are the only way to ensure full protection.

6 06 Dräger Workstar Flexothane / PVC Technical Data Material properties Dräger WorkStar Flexothane Dräger WorkStar PVC Colour Red /dark-blue yellow Weight ~0,7 kg ~2,0 kg Material Water-vapour-permeable textile Textile coated with PVC on both sides Mass per unit area of material: ~170 g/m 3 ~350 g/m 3 Friction resistance Class 2 of 6 Class 6 of 6 Adhesion resistance (top side to bottom side) Class 2 of 2 Class 2 of 2 Adhesion resistance (top side to top side) - Class 1 of 2 Resistance to bending / flexion Class 5 of 5 Class 5 of 5 Perforation resistance Class 2 of 5 Class 3 of 5 Tensile strength Class 3 of 5 Class 3 of 5 Max. tensile force with heat-sealed seams Class 5 of 5 Class 5 of 5 Max. tensile force without heat-sealed seams Class 4 of 5 Class 4 of 5 Washability Restricted machine wash (max. 40 C) Hand wash (max. 30 C) Permeation data for liquids APPROVALS Resistance data can be found at WorkStar Flexothane approved in accordance with EN 14605, type 4 WorkStar PVC approved in accordance with EN 466, type 3 Ordering Information Dräger WorkStar Dräger WorkStar Flexothane, for body heights from 164 cm to 182 cm & chest measurements from 96 cm to 104 cm Dräger WorkStar Flexothane, for body heights from 170 cm to 188 cm & chest measurements from 104 cm to 112 cm Dräger WorkStar Flexothane, for body heights from 170 cm to 188 cm & chest measurements from 112 cm to 120 cm Dräger WorkStar Flexothane, for body heights from 176 cm to 194 cm & chest measurements from 120 cm to 128 cm Order-No. M R L R XL R XXL R

7 Dräger Workstar Flexothane / PVC 07 Ordering Information Dräger WorkStar PVC, for body heights from 164 cm to 182 cm & chest measurements from 96 cm to 104 cm Dräger WorkStar PVC, for body heights from 170 cm to 188 cm & chest measurements from 104 cm to 112 cm Dräger WorkStar PVC, for body heights from 170 cm to 188 cm & chest measurements from 112 cm to 120 cm Dräger WorkStar PVC, for body heights from 176 cm to 194 cm & chest measurements from 120 cm to 128 cm Dräger WorkStar PVC, for body heights from 176 cm to 194 cm & chest measurements from 128 cm to 136 cm M R L R XL R XXL R XXXL R

8 08 Dräger Workstar Flexothane / PVC Notes Communications & Sales Marketing PP LE Printed in Germany Chlorine-free environmentally compatible Subject to modifications 2015 Drägerwerk AG & Co. KGaA CORPORATE HEADQUARTERS Drägerwerk AG & Co. KGaA Moislinger Allee Lübeck, Germany Manufacturer: Dräger Safety AG & Co. KGaA Revalstraße Lübeck, Germany REGION EUROPE CENTRAL AND EUROPE NORTH Dräger Safety AG & Co. KGaA Revalstraße Lübeck, Germany Tel Fax info@draeger.com REGION EUROPE SOUTH Dräger Safety France SAS 25, rue Georges Besse Antony Cedex Tel Fax europe.south@draeger.com REGION MIDDLE EAST, AFRICA Dräger Safety AG & Co. KGaA Branch Office P.O. Box Dubai, United Arab Emirates Tel Fax contactuae@draeger.com REGION ASIA PACIFIC Draeger Safety Asia Pte Ltd 25 International Business Park #04-20/21 German Centre Singapore Tel Fax asia.pacific@draeger.com REGION CENTRAL AND SOUTH AMERICA Dräger Panama S. de R.L. Complejo Business Park, V tower, 10th floor Panama City Tel Fax contactcsa@draeger.com Locate your Regional Sales Representative at: