Certificate of Approval
|
|
- Tabitha Sims
- 6 years ago
- Views:
Transcription
1 Certificate of Approval This is to certify that the Director of Energy Safety has approved the electrical equipment described hereunder. Registered Declarant: Australia Pty Ltd 1 Heathcote Road, Liverpool, NSW 2170 Required Marking: ESV Electrical equipment covered by this approval must comply in all respects with the approved article, and prior to being supplied or offered for supply, must be clearly and indelibly marked with the required marking indicated above, or the Regulatory Compliance Mark (RCM) provided that the requirements of all relevant parts of AS/NZS 4417 applicable to the article are fulfilled. Any modifications to the electrical equipment or its place of manufacture must be approved by Energy Safe Victoria prior to the equipment being supplied or offered for supply. Notification must be given to Energy Safe Victoria of any change to the name or address of the holder of the certificate within 20 business days. ARTICLE DETAILS Electrical Equipment: Level 3 Building wiring cable Building wiring cable Relevant Standards: AS/NZS :2006 Expiry Date: 11 April 2022 Conditions of Approval: DATE OF APPROVAL:11 April 2017 Page: (2/ 13) Director of Energy Safety
2 Approval details Model /750V 1.0(S)X2C FLAT ACT WH 450/750V 2x1.0mm2 Cu Flat V-90 insulation (Red/white), 3V-90 Model /750V 1.0(S)X2C 450/750V 2x1.0mm2 Cu Flat V-90 Model /750V 1.0(S)X2C+1.0(S)E 450/750V 2x1.0mm2+1.0mm2 Earth (Red/GY/Black), 3V-90 Sheath(White ) Model /750V 1.0(S)X2C+E 450/750V 2x1.0mm2+1.0mm2(stranded) Earth (Red/GY/Black), 3V-90 Sheath(White ) DATE OF APPROVAL:11 April 2017 Page: (3/ 13) Director of Energy Safety
3 Model /750V 1.0(S)X3C FLAT LEMON 450/750V 3x1.0mm2 Flat V-90 insulation (Red/white/Blue), 3V-90 Sheath(Lemon) Model /750V 1.0(S)X3C 450/750V 3x1.0mm2 Flat V-90 insulation (Red/white/Blue), 3V-90 Model /750V 1.5X2C FLAT ACT RD 450/750V 2x1.5mm2 Cu Flat V-90 insulation (Red/white), 3V-90 Sheath(Red) Model /750V 1.5X2C FLAT ACT WH WPR2013 Pt2 EE /750V 2x1.5mm2 Cu Flat V-90 insulation (Red/white), 3V-90 Model /750V 1.5X2C DATE OF APPROVAL:11 April 2017 Page: (4/ 13) Director of Energy Safety
4 450/750V 2x1.5mm2 Cu Flat V-90 Model /750V 1.5X2C+E WPR2013 Pt2 EE /750V 2x1.5mm2+1.5mm2 Earth (Red/GY/Black), 3V-90 Sheath(White ) Model /750V 1.5X2C+E NZ 450/750V 2x1.5mm2+1.5mm2 Earth (Red/GY/Black), 3V-90 Sheath(White ) Model /750V 1.5X3C FLAT LEMON 450/750V 3x1.5mm2 Flat V-90 insulation (Red/white/Blue), 3V-90 Sheath(Lemon) Model /750V 1.5X3C DATE OF APPROVAL:11 April 2017 Page: (5/ 13) Director of Energy Safety
5 450/750V 3x1.5mm2 Flat V-90 insulation (Red/white/Blue), 3V-90 Model /750V 1.5X3C+E FLAT OR 450/750V 3x1.5mm mm2 Flat V- 90 insulation (Red/white/GY/Black), 3V-90 Sheath(Orange) Model /750V 1.5X3C+E FLAT RWBK/BU AIRCON 450/750V 3x1.5mm mm2 Flat V- 90 insulation (Red/white/GY/Black), 3V-90 Sheath(Blue) Model /750V 1.5X3C+E FLAT RWBU/BU AIRCON 450/750V 3x1.5mm mm2 Flat V- 3V-90 Sheath(Blue) Model /750V 1.5X3C+E 450/750V 3x1.5mm mm2 Flat V- 90 insulation (Red/white/GY/Black), 3V-90 DATE OF APPROVAL:11 April 2017 Page: (6/ 13) Director of Energy Safety
6 Model /750V 10X2C FLAT OR WPR2013 Pt2 EE /750V 2x10mm2 Cu Flat V-90 Sheath(Orange) Model /750V 10X2C 450/750V 2x10mm2 Cu Flat V-90 Model /750V 10X2C+E 450/750V 2x10mm2+4 mm2 Earth Cu 3V-90 Model /750V 16X2C FLAT OR WPR2013 Pt2 EE /750V 2x16mm2 Cu Flat V-90 Sheath(Orange) Model /750V 16X2C DATE OF APPROVAL:11 April 2017 Page: (7/ 13) Director of Energy Safety
7 450/750V 2x16mm2 Cu Flat V-90 Model /750V 16X2C+2.5X1 FLAT BK 450/750V 2x16mm2+2.5 mm2 Cu Flat V-90 insulation (Red/Orange/Black), 3V-90 Sheath(Black) Model /750V 16X2C+E 450/750V 2x16mm2+6 mm2 Earth Cu 3V-90 Model /750V 2.5X2C FLAT ACT WH 450/750V 2x2.5mm2 Cu Flat V-90 insulation (Red/white), 3V-90 Model /750V 2.5X2C FLAT BK 450/750V 2x2.5mm2 Cu Flat V-90 Sheath(Black) DATE OF APPROVAL:11 April 2017 Page: (8/ 13) Director of Energy Safety
8 Model /750V 2.5X2C FLAT BK (UV) 450/750V 2x2.5mm2 Cu Flat V-90 Sheath(Black UV stabilised) Model /750V 2.5X2C 450/750V 2x2.5mm2 Cu Flat V-90 Model /750V 2.5X2C+E FLAT BK 450/750V 2x2.5mm2+2.5mm2 Earth (Red/GY/Black), 3V-90 Sheath(Black) Model /750V 2.5X2C+E WPR2013 Pt2 EE /750V 2x2.5mm2+2.5mm2 Earth (Red/GY/Black), 3V-90 Sheath(White ) Model /750V 2.5X2C+E NZ DATE OF APPROVAL:11 April 2017 Page: (9/ 13) Director of Energy Safety
9 450/750V 2x2.5mm2+2.5mm2 Earth (Red/GY/Black), 3V-90 Sheath(White for New Zealand) Model /750V 2.5X3C+E FLAT RWBK/BU AIRCON 450/750V 3x2.5mm mm2 Flat V- 90 insulation (Red/white/GY/Black), 3V-90 Sheath(Blue) Model /750V 2.5X3C+E FLAT RWBU/BU AIRCON 450/750V 3x2.5mm mm2 Flat V- 3V-90 Sheath(Blue) Model /750V 2.5X3C+E 450/750V 3x2.5mm mm2 Flat V- 3V-90 Model /750V 4X2C FLAT ACT WH 450/750V 2x4mm2 Cu Flat V-90 insulation (Red/white), 3V-90 DATE OF APPROVAL:11 April 2017 Page: (10/ 13) Director of Energy Safety
10 Model /750V 4X2C FLAT WH 450/750V 2x4mm2 Cu Flat V-90 Model /750V 4X2C+E FLAT BK 450/750V 2x4mm2+2.5mm2 Earth Cu 3V-90 Sheath(Black) Model /750V 4X2C+E 450/750V 2x4mm2+2.5mm2 Earth Cu 3V-90 Model /750V 4X2C+E4 XTRA 450/750V 2x4mm2+4mm2 Earth Cu 3V-90 Model /750V 4X3C+E DATE OF APPROVAL:11 April 2017 Page: (11/ 13) Director of Energy Safety
11 450/750V 3x4mm mm2 Flat V- 3V-90 Model /750V 4X3C+E 450/750V 3x4mm mm2 Flat V- 3V-90 Model /750V 6X2C FLAT WH 450/750V 2x6mm2 Cu Flat V-90 Model /750V 6X2C+E 450/750V 2x6mm2+2.5mm2 Earth Cu 3V-90 Model /750V 6X2C+E6 XTRA 450/750V 2x6mm2+ 6mm2 Earth Cu 3V-90 DATE OF APPROVAL:11 April 2017 Page: (12/ 13) Director of Energy Safety
12 Model /750V 6X3C+E 450/750V 3x6mm mm2 Flat V- 3V-90 Model /750V 6X3C+E 450/750V 3x6mm mm2 Flat V- 3V-90 DATE OF APPROVAL:11 April 2017 Page: (13/ 13) Director of Energy Safety
8-7 Heavy vehicle kingpin or socket coupling (for towing a semi-trailer)
Correct as at 15th April 2014. It may be superseded at any time. Extract taken: from NZTA Vehicle Portal > VIRMs > In-service certification (WoF and CoF) > Heavy trailers > Towing connections > Heavy vehicle
More informationCERTIFICATE OF CONFORMITY
CERTIFICATE OF CONFORMITY This is to certify that Product Description, Purpose or Use Polyethylene (PE) pipes for pressure applications Certificate Holder ASA Plastics Pty Ltd Polyethylene (PE) Pipes Complies
More information8-6 Heavy vehicle fifth wheel or ball coupling (for towing a semi-trailer)
Correct as at 3rd September 2018. It may be superseded at any time. Extract taken: from NZTA Vehicle Portal > VIRMs > In-service certification (WoF and CoF) > Heavy trailers > Towing connections > Heavy
More information12-5 Heavy vehicle fifth wheel or ball coupling (for towing a semi-trailer)
Correct as at 15th April 2014. It may be superseded at any time. Extract taken: from NZTA Vehicle Portal > VIRMs > In-service certification (WoF and CoF) > Heavy vehicles > Towing connections > Heavy vehicle
More informationLevel 1. Certificate of Conformity. Australian Certification Services Pty Ltd grants to the WaterMark User: Delsa Marmi Pty Ltd
Level 1 Certificate of Conformity Australian Certification Services Pty Ltd grants to the WaterMark User: Delsa Marmi Pty Ltd Trading as Delsa Marmi Pty Ltd the right to use the WaterMark as shown above
More informationAS/NZS 3112:2004 AS/NZS
AS/NZS 3112:2011 Incorporating Amendment No. 1, 2, and 3 Australian/New Zealand Standard Approval and test specification Plugs and socket-outlets Superseding AS/NZS 3112:2004 AS/NZS 3112:2011 AS/NZS 3112:2011
More informationIntroduction. Applications. Materials of Construction
Introduction The Hydroflux QPRESS containerized sludge plant is a packaged system that is delivered as a pre-piped, pre-wired and tested unit. The system is designed to dewater sludge that is produced
More informationHelena Snyman - Technical Manager and Sydney Bhengu - Customer Support Technologist Elster Kent Metering (Pty) Ltd. South Africa
Helena Snyman - Technical Manager and Sydney Bhengu - Customer Support Technologist Elster Kent Metering (Pty) Ltd. South Africa Electricity meter installation and installation verification Safety NRS
More informationElectricity Safety (Electrical Installations) Regulation 2005
New South Wales Electricity Safety (Electrical Installations) Regulation 2005 under the Electricity Safety Act 1945 Her Excellency the Governor, with the advice of the Executive Council, has made the following
More informationAustralian/New Zealand Standard
AS/NZS 3131 Australian/New Zealand Standard Approval and test specification Plugs and socket-outlets for stationary appliances This Joint Australian/New Zealand Standard was prepared by Joint Technical
More informationPOULTRY WINCHES New Winching Solutions for Poultry Applications
POULTRY WINCHES New Winching Solutions for Poultry Applications RRANT Y Certified to Australian Standard AS/NZS48 Crane, Hoist & Winches. CELEBRATING 00 S OF AUSTRALIAN MANUFACTURING Introducing Grifco
More informationAS/NZS 3131:2001 AS/NZS
AS/NZS 3131:2015 Australian/New Zealand Standard Approval and test specification Plugs and socket-outlets for stationary appliances Superseding AS/NZS 3131:2001 AS/NZS 3131:2015 AS/NZS 3131:2015 This joint
More informationPreventative Maintenance. The key to accuracy, reliability and longevity for your first-class analysers from MEP Instruments
Preventative Maintenance The key to accuracy, reliability and longevity for your first-class analysers from MEP Instruments Preventative maintenance 02 Prevention is the best medicine and saves money With
More informationPRODUCT MANUAL. Backpack Sprayer 12L
PRODUCT MANUAL Backpack Sprayer 12L Contents D A E B I H F C G A. Pump lever brace B. Pump lever with lance holder C. Spray Bottle D. Pump Assembly E. Extendable fibreglass lance with three nozzle options
More informationINSTALLATION SPECIFICATION SHEET These instructions must be used in conjunction with the 'General Installation Instructions' for Masport wood fires.
HW INSTALLATION SPECIFICATION SHEET These instructions must be used in conjunction with the 'General Installation Instructions' for Masport wood fires. CLEARANCE REQUIREMENTS This fire has been tested
More informationP High Voltage Catalogue Cables Australia Powering your Project
P +61 8 9367 8978 www.cablesaustralia.com.au High Catalogue Cables Australia Powering your Project CABLES AUSTRALIA PTY LTD HIGH VOLTAGE CATALOGUE ABOUT US Cables Australia is a locally owned and operated
More informationAustralian/New Zealand Standard
AS/NZS 1425:2007 AS/NZS 1425:2007 Australian/New Zealand Standard LP Gas fuel systems for vehicle engines AS/NZS 1425:2007 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee
More informationPRODUCT MANUAL. Heavy Duty Shoulder Sprayer 5L & 8L
PRODUCT MANUAL SUPERIOR PERFORMANCE Heavy Duty Shoulder Sprayer 5L & 8L Contents E A B I H F D C G A. Pump Handle with lance holder B. Safety Valve C. Spray Bottle D. Pump Assembly E. Stainless steel lance
More informationPRODUCT MANUAL. Heavy Duty Backpack Sprayer 16L
PRODUCT MANUAL SUPERIOR PERFORMANCE Heavy Duty Backpack Sprayer 16L Contents A D E B I H F C G A. Pump lever brace B. Pump lever with lance holder C. Spray Bottle D. Pump Assembly E. Telescopic stainless
More informationUWA Electrical Safety Procedure
UWA Electrical Safety Procedure Who it applies to The requirements of WA legislation are applicable to academic personnel (e.g. lecturers and researchers), students of various levels, personnel that support
More informationLand Transport Rule Heavy Vehicles Preface to Consolidated Rule with amendments incorporated as at 1 December 2016
Land Transport Rule Heavy Vehicles Preface to Consolidated Rule with amendments incorporated as at 1 December 2016 The consolidation of the Rule and its amendments is intended to provide upto-date details
More informationOver 330 Clarifier installations in 3 continents
LAMELLA SEPARATORS Over 330 Clarifier installations in 3 continents With over 60 years of design and commissioning expertise, you can be assured that your Hydroflux Epco clarifier will perform consistently
More informationAustralian/New Zealand Standard
AS/NZS 3001:2008 (Incorporating Amendment No. 1) AS/NZS 3001:2008 Australian/New Zealand Standard Electrical installations Transportable structures and vehicles including their site supplies AS/NZS 3001:2008
More informationLevel 2. Certificate of Conformity. Australian Certification Services Pty Ltd grants to the WaterMark User: Watersave Australia Pty Ltd
Level 2 Certificate of Conformity Australian Certification Services Pty Ltd grants to the WaterMark User: Watersave Australia Pty Ltd Trading as Watersave Australia the right to use the WaterMark as shown
More informationDEPARTMENT OF HEALTH
DEPARTMENT OF HEALTH Directorate: Radiation Control Private Bag X62 BELLVILLE 7535 Tel: (021) 9486162 Fax: (021) 9461589 Web: http://www.doh.gov.za/department/radiation/01.html MEDEX AFRICA IMPORT AND
More informationAS/NZS :2016. Grid connection of energy systems via inverters AS/NZS :2016. Part 1: Installation requirements
AS/NZS 4777.1:2016 Australian/New Zealand Standard Grid connection of energy systems via inverters Part 1: Installation requirements AS/NZS 4777.1:2016 AS/NZS 4777.1:2016 This joint Australian/New Zealand
More informationChain-saws (combustion engine powered)
Compliance Guide Rev.4.2, Edition 04/2018 Chain-saws (combustion engine powered) European Garden Machinery Federation EGMF Bd Reyers 80, 1030 Brussels, Belgium secretariat@egmf.org +32 2 206 68 66 This
More informationCIRCULAR CLARIFIER SYSTEMS
CIRCULAR CLARIFIER SYSTEMS Over 330 installations in 3 continents With over 60 years of design and commissioning expertise, you can be assured that your Hydroflux Epco clarifier will perform consistently
More informationELECTRICIANS REGULATIONS EXAMINATION 25 June 2011
ER42 Candidate Code No. For Board Use Only Result Date Result Date Int ELECTRICIANS REGULATIONS EXAMINATION 25 June 2011 Int QUESTION AND ANSWER BOOKLET INSTRUCTIONS READ CAREFULLY Time Allowed: Three
More informationCRITO Connection technology. Double and triple T and TCC section busbars
Centre feed unit 5 Centre feed unit Centre feed unit 5 Centre feed unit up to 4000 A combines the advantages of high short-circuit capacity, drill-free mounting, brace terminal technology and clearly structured
More informationTechnical Standard - TS 129. Small Inverter Energy Systems (IES) - Capacity not exceeding 30kW. SA Power Networks. Published: November 2017
TS 130: Inverter Energy Systems (IES) - capacity up to or equal to 200 kw Technical Standard - TS 129 Small Inverter Energy Systems (IES) - Capacity not exceeding 30kW Published: November 2017 SA Power
More informationLand Transport (Driver Licensing) Rule
Land Transport (Driver Licensing) Rule Consolidated Rule with amendments incorporated as at 18 November 2015 The consolidation of the Rule and its amendments is intended to provide upto-date details of
More informationINSTALLATION SPECIFICATION SHEET
HESTIA 2 HESTIA HW INSTALLATION SPECIFICATION SHEET These instructions must be used in conjunction with the 'General Installation Instructions' for MASPORT wood fires. CLEARANCE REQUIREMENTS This fire
More informationKRONOS MULTI FUEL INSTALLATION SPECIFICATION SHEET MODEL
KRONOS MULTI FUEL INSTALLATION SPECIFICATION SHEET These instructions must be used in conjunction with the 'General Installation Instructions' for MASPORT wood fires. CLEARANCE REQUIREMENTS This fire has
More informationClipsal Lifesaver Portable Power Outlet with RCBO protection 485 Series
Clipsal Lifesaver Portable Power Outlet with RCBO protection 485 Series User Guide 485 Series Portable Protected Power Outlet User Guide 3.0 Operating Instructions 1. Uncoil the lead fully from around
More informationEquivalency Certificate (Approval issued by the competent authority of Canada)
Transport Canada Safety and Security Transports Canada Sécurité et sûreté Transportation of Dangerous Direction générale du transport Goods Directorate des marchandises dangereuses 330 Sparks Street 330,
More informationCertificate of Conformity
Australian/New Zealand Certification Scheme for EXPLOSION-PROTECTED ELECTRICAL EQUIPMENT ANZEx Scheme Certificate of Conformity Certificate No.: ANZEx 13.3000 Issue No.: 0 Date of Issue: 31/01/2014 Applicant:
More information185-40(02) (Head Restraints)
LVVTA Low Volume Vehicle Standard 185-40(02) (Head Restraints) Page 1 of 10 Low Volume Vehicle Technical Association Incorporated Low Volume Vehicle Standard 185-40(02) (Head Restraints) This Low Volume
More informationMotor Vehicle Drivers Instructors Regulations 1964
Western Australia Act 1963 Regulations 1964 As at 01 Jul 2017 Version 07-f0-00 Western Australia Regulations 1964 Contents 1. Citation 1 2. Terms used 1 3. Application for licence, form of 2 4. Licence,
More informationLand Transport Rule Traction Engines [2008]
Land Transport Rule Traction Engines [2008] Rule 63001 Overview Land Transport Rules are law produced by Land Transport New Zealand for the Minister of Transport. Land Transport NZ drafts Rules in plain
More informationLandmark Rooftop Packaged Units
Landmark Rooftop Packaged Units Engineered for superior performance and reliability Exclusively distributed by AUS - 13 23 50 www.lennoxaus.com.au NZ - 0800 653 330 www.lennoxnz.co.nz 1 Landmark Rooftop
More informationCertificate of Conformity
Applicant: Compac Industries Ltd 52 Walls Road, Penrose Auckland 1061, NEW ZEALAND Electrical Apparatus: Series Fuel Dispensers Type of Protection: Marking Code: Manufacturer: Manufacturing Location(s):
More informationAustralian/New Zealand Standard
AS/NZS 3856.2:1998 Australian/New Zealand Standard Hoists and ramps for people with disabilities Vehicle-mounted Part 2: Installation requirements AS/NZS 3856.2:1998 This Joint Australian/New Zealand Standard
More informationFIRE TEST REPORT FH 5154
1222 Moonshine Road Judgeford RD1 Porirua 5381 New Zealand T +64 4 237 1170 F +64 4 237 1171 branz@branz.co.nz www.branz.co.nz FIRE TEST REPORT FH 5154 CONE CALORIMETER TEST AND NCC SPECIFICATION C1.10
More informationINSTALLATION SPECIFICATION SHEET These instructions must be used in conjunction with the 'General Installation Instructions' for Masport wood fires.
R5000L or R5000P (NZ, AU & NZ Rural) INSTALLATION SPECIFICATION SHEET These instructions must be used in conjunction with the 'General Installation Instructions' for Masport wood fires. CLEARANCE REQUIREMENTS
More informationOWNER S OPERATING MANUAL
OWNER S OPERATING MANUAL WELD AND CUT ARC/TIG INVERTER PLASMA 30 PLASMA CUTTER TABLE OF CONTENTS Safety instructions 3-4 Weld & Cut ARC/TIG and Plasma Cutter 5 Page Installation 6 Welder Information 6-8
More informationOWNER S OPERATING MANUAL
OWNER S OPERATING MANUAL ARC 140 AMP WELDER TABLE OF CONTENTS Page Safety instructions 3-4 Inverter Arc Welder 5 Welder Information 5 Arc 140 AMP welder set up 6 Assembly instructions 6 Operation 7 Welding
More informationAustralian/New Zealand Standard
AS/NZS 3112:2011 AS/NZS 3112:2011 Australian/New Zealand Standard Approval and test specification Plugs and socket-outlets AS/NZS 3112:2011 This Joint Australian/New Zealand Standard was prepared by Joint
More information28 Exhaust emissions standard compliance
Correct as at 11th April 2014. It may be superseded at any time. Extract taken: from NZTA Vehicle Portal > VIRMs > Entry certification > Technical bulletins > Exhaust emissions standard compliance 28 Exhaust
More informationNon-woven nylon web impregnated with resin. Applied to clean industrial surfaces without removing the parent material.
Non-woven nylon web impregnated with resin. Applied to clean industrial surfaces without removing the parent material. When it comes to cleaning paint, rust, coatings, scale and oxidation, 3M has the range
More informationInformation from ZARGES: the latest version of EN
Information from ZARGES: the latest version of EN 131-1+2 Erfüllt neue EN 131-1+2 Meets new EN 131-1+2 www.zarges.com Reliable Safety EN 131 the most important improvements The standard EN 131-1+2*, which
More informationPractice Note on the Sourcing of Threaded Rod Used for Foundation Bolts
MATERIALS Practice Note on the Sourcing of Threaded Rod Used for Foundation Bolts Authors: Kevin Cowie, Alistair Fussell Affiliation: Steel Construction New Zealand Inc. Date: 20 th February 2018 Ref.:
More informationHedge trimmers (combustion engine powered)
Compliance Guide Rev.2.1 Edition 04/2018 Hedge trimmers (combustion engine powered) European Garden Machinery Federation EGMF Bd Reyers 80, 1030 Brussels, Belgium secretariat@egmf.org +32 2 706 82 37 This
More informationElectricity Safety (Installations) Regulations 2009
Version No. 003 Electricity Safety (Installations) Regulations 2009 Version incorporating amendments as at 27 April 2010 TABLE OF PROVISIONS Regulation Page PART 1 PRELIMINARY 1 101 Objectives 1 102 Authorising
More informationWELLINGTON, NEW ZEALAND. PURSUANT to sections 152, 155(a) and (e) and 158(a)(i) of the Land Transport Act 1998
WELLINGTON, NEW ZEALAND PURSUANT to sections 152, 155(a) and (e) and 158(a)(i) of the Land Transport Act 1998 I, Gerry Brownlee, Minister of Transport, HEREBY make the following ordinary Rule: Land Transport
More information10 Load restraints Load anchorages. Reasons for rejection. Mandatory requirements. Mandatory equipment. Condition. Modification and repair
Correct as at 20th October 2018. It may be superseded at any time. Extract taken from: NZTA Vehicle Portal > VIRMs > In-service certification (WoF and CoF) > Heavy trailers > Load restraints 10 Load restraints
More informationAURELIA METALS LTD 2016 Annual Report
AURELIA METALS LTD 2016 Annual Report AURELIA METALS LTD ASX Code: AMI ABN: 37 108 476 384 2 CORPORATION PLACE, ORANGE NSW 2800 Phone: +61 2 6363 5200 Fax: +61 2 6361 4711 www.aureliametals.com COMPANY
More informationHealth and Safety at Work (Hazardous Substances Thermoplastic Stationary Tanks) Safe Work Instrument 2017
This safe work instrument is administered by WorkSafe New Zealand. For more information please see: Website: http://www.worksafe.govt.nz Contact phone: 0800 030 040 Contact address: PO Box 165 Wellington
More informationAccessory Fitting Instructions
Accessory Fitting Instructions Thank you for choosing this Triumph genuine accessory kit. This accessory kit is the product of Triumph's use of proven engineering, exhaustive testing, and continuous striving
More informationElectric Vehicle Charging Safety Guidelines Part 2: Selection and Installation
86 Customhouse Quay PO Box 165, Wellington 6140 New Zealand Date of publication: 1 November 2016 Issued by: Mark Wogan, Manager Energy Safety WorkSafe New Zealand Electric Vehicle Charging Safety Guidelines
More informationMedical & Surgical Lighting Pty Ltd SERIES 1 & 3 MEDICAL EXAMINATION LIGHTS
Medical & Surgical Lighting Pty Ltd SERIES 1 & 3 MEDICAL EXAMINATION LIGHTS Introduction Medical & Surgical Lighting Pty Ltd (MSL) is an Australian company specialising in the design and manufacture of
More informationEU-Mexico Free Trade Agreement EU TEXTUAL PROPOSAL
This document contains an EU proposal for a legal text on an annex on motor vehicles and equipment and parts thereof to the Trade in Goods chapter in the Trade Part of a possible modernised EU-Mexico Association
More informationElectric Vehicle Charging Safety Guidelines Part 1: Safety Fundamentals Edition DRAFT
Date of publication: 1 November 2016Not yet published Issued by: Mark Wogan, Manager Energy Safety WorkSafe New ZealandNot yet issued Electric Vehicle Charging Safety Guidelines Part 1: Safety Fundamentals
More informationMonowills Look for the Monowills brand on the components, to ensure you have the genuine article.
Webforge, a market leader in Access systems, introduces Monowills Link, a modular range of handrail and balustrade solutions. Monowills stanchions and safety barriers are known and trusted across the Asia
More information01 CONTENTS. e-beam. e-beam. Technical Information 03
B 1 01 CONTENTS 02 e-beam Technical Information 03 11 e-beam Strutting Beams 12 Strutting Counter Beams 14 Strutting Hanging Beams 16 Counter Beams 18 Roof Beams 20 ENGINEERED TO LOAD ENGINEERED TO LENGTH
More informationAustralian Standard. Stand-alone power systems. Part 1: Safety requirements AS
AS 4509.1 1999 Australian Standard Stand-alone power systems Part 1: Safety requirements This Australian Standard was prepared by Committee EL/42, Renewable Energy Power Supply Systems and Equipment. It
More informationOffshore manufacturing and fabrication: guidelines for heavy trailers (class TC and TD)
Offshore manufacturing and fabrication: guidelines for heavy trailers (class TC and TD) 1. INTRODUCTION This guideline has been prepared to alleviate confusion regarding the difference in Rule requirements
More informationPS24/AC Volt AC 16 Amp
ALTERNATING CURRENT POWER SUPPLY PS24/AC-6 24 Volt AC 6 Amp FEATURES: Mains Fail Relay Output and Indicator. Fuse blow indication and relay output. 6 fused outlets DESCRIPTION: SPECIFICATIONS: Inputs Voltage-
More informationTillers Motor hoes (combustion engine powered)
Compliance Guide Rev.2.1, Edition 04/2018 This guide is intended to help market surveillance authorities with the checking of conformity of combustion engine powered brush-cutters and grass trimmers in
More informationPrecision engineered to the highest Australian Standards, you ll find Ardent copper fittings and coils for just about every application. Ardent.
Technical Guide Precision engineered to the highest Australian Standards, you ll find Ardent copper fittings and coils for just about every application. Ardent. The trusted name in copper. Contents Copper
More informationESS Lighting Instruction Pack Original Energy Saver
ESS Lighting Instruction Pack Original Energy Saver For projects completed: AFTER 1 July 2014 This Instruction Pack is designed to simplify the processing of Energy Savings Certificates for commercial
More informationDALI Switch Mechanisms DCDAL31 Series Installation Instructions
DALI Switch Mechanisms DCDAL31 Series Installation Instructions www.clipsal.com.au Contents 1.0 Description...3 1.1 Product Range...3 1.2 DCDAL31 Switch Mechanisms...3 1.3 Safety Information...3 2.0 Installation
More informationRestrained Plugs and Receptacles for South Africa
Restrained Plugs and Receptacles for South Africa M.I.P. Quality ISO 900 Meadowbank and Brisbane Lic. 0 Restrained Plug and Receptacle Range CMI Electrical Products is a Quality Endorsed Company certified
More informationVariable Frequency Drive NEW! Moving your Control. Forward VFD from Unitronics kW Single Phase kW Three Phase
Variable Frequency Drive Moving your Control NEW! Forward VFD from Unitronics 0.4-2.2kW Single Phase 0.75-110kW Three Phase Total Solution All-in-One software PLC programming HMI design NEW! VFD configuration
More informationEcoglo HYU Hybrid Photoluminescent Exit Signs: Compliance with NZBC F8/AS1
Ecoglo International Ltd 77 Kingsley Street, Christchurch New Zealand +64 3 348 3781 mark.watson@ecoglo.com www.ecoglo.co.nz 7 th September 2017 Ecoglo HYU Hybrid Photoluminescent Exit Signs: Compliance
More information78 Fuel Consumption Import Statement System. Overview. Fuel consumption information for importers. Background. System overview
Correct as at 11th April 2014. It may be superseded at any time. Extract taken: from NZTA Vehicle Portal > VIRMs > Entry certification > Reference materials > Fuel Consumption Import Statement System 78
More informationResistance Thermometers Model TR602, for Flat Surfaces Model TR603, for Pipe Surfaces
Electrical Temperature Measurement Resistance Thermometers Model TR602, for Flat Surfaces Model TR603, for Pipe Surfaces WIKA Data Sheet TE 60.35 Application To measure surface temperatures on flat surfaces
More informationGlazing, Windscreen Wipe and Wash, and Mirrors 1999
October 1999 Glazing, Windscreen Wipe and Wash, and Mirrors 1999 AC No.2/32012 What is this advisory circular about? This advisory circular contains information about Land Transport Rule: Glazing, Windscreen
More informationLevel 2. Certificate of Conformity. Australian Certification Services Pty Ltd grants to the WaterMark User: Gracott Industries Pty Ltd
Level 2 Certificate of Conformity Australian Certification Services Pty Ltd grants to the WaterMark User: Gracott Industries Pty Ltd Trading as Gracott Industries Pty Ltd the right to use the WaterMark
More informationOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS RTECK terminal boxes RTKB series IEC Ex EX010 TECHNICAL FILES CONTENTS: 1) Contents 2) General information 3) Safety information 4) Conformity to standards 5) Function 6) Technical
More informationOWNER S OPERATING MANUAL
OWNER S OPERATING MANUAL INVERTER TIG PRO 170 ELECTRONIC INVERTER ARC/TIG WELDER TABLE OF CONTENTS Safety instructions 3-4 Inverter TIG Pro Welders 5-8 Installation 9 Operation 9-11 How to use the machine
More informationInformation Bulletin. Fire Pump Battery Failures. Version 1.1 Approved for release August 2011
Version 1.1 Approved for release August 21 1.0 Purpose Statement The purpose of this is to raise awareness amongst stakeholders about concerning industry trends associated with batteries supporting fire
More informationCommercial Kitchen Exhaust Fans
Coercial Kitchen Exhaust Fans Superior Performance Robust Design Reliable Operation Easy Installation Vertical Exhaust Fans - Type V The Technology THE DESIGN Aluminium mixed flow type impellers have a
More informationB&R Enclosures UNIVERSAL PB. brenclosures.com.au
B&R Enclosures UNIVERSAL PB brenclosures.com.au Universal PB Modular Universal Distribution Board System RAL7032 N4 316 IP 66 Highly robust distribution board system. Design based on Universal NI series.
More information(Text with EEA relevance)
L 150/10 COMMISSION REGULATION (EU) 2015/924 of 8 June 2015 amending Regulation (EU) No 321/2013 concerning the technical specification for interoperability relating to the rolling stock freight wagons
More informationFSP AUSTRALIA PTY LTD Locker Catalogue
FSP AUSTRALIA PTY LTD Locker Catalogue 2nd Edition Phone: 1300 735 093 (Australia) www.fspandco.com The home of OZ Loka and OCKA Loka Heavy Duty Plastic Locker Systems INDEX Product Index CABINETS Cabinets
More informationGazette GOVERNMENT NOTICES
Commonwealth of Australia Published by the Commonwealth of Australia Gazette GOVERNMENT NOTICES HEAVY VEHICLE NATIONAL LAW NATIONAL CLASS 2 HEAVY VEHICLE ROAD TRAIN AUTHORISATION (NOTICE) 2014 (No. 1)
More informationNEW AND EXTREME HIGH QUALITY CABLE GUARDS RED LINE USE WITH HIGH VOLUME VEHICULAR TRAFFIC
NEW AND EXTREME HIGH QUALITY CABLE GUARDS MANUFACTURED IN UK RED LINE USE WITH HIGH VOLUME VEHICULAR TRAFFIC BLACK LINE USE WITH LOW VOLUME VEHICULAR AND ALL PEDESTRIAN TRAFFIC RED FLOOR 3 SLOT AND 5 SLOT
More informationBattery Pack Charger OpenStage WL 3 / OpenStage WL3 Plus. Installation Guide A31003-M2000-J
Battery Pack Charger OpenStage WL 3 / OpenStage WL3 Plus Installation Guide A31003-M2000-J101-2-7631 Our Quality and Environmental Management Systems are implemented according to the requirements of the
More informationFAQ s. Designing metering switchboards as per Victorian service installation rules
FAQ s Designing metering switchboards as per Victorian service installation rules Designing metering switchboards as per Victorian service installation rules Q: Who develops the Victorian service installation
More informationConstruction Safety Amendment (Amusement Devices) Regulation 1998
New South Wales Construction Safety Amendment (Amusement Devices) Regulation 1998 under the Construction Safety Act 1912 His Excellency the Governor, with the advice of the Executive Council, has made
More informationRedFlow Technologies Ltd
RedFlow Technologies Ltd Quarterly Report Period ending 31 March 2010 CORPORATE DIRECTORY Board of Directors Mr Chris Winter (CEO) Mr Phillip Hutchings (Chairman) Dr Alex Winter (CTO) Mr Richard Aird (Director,
More information28 Exhaust emissions standard compliance
Correct as at 7th June 2013. It may be superseded at any time. Extract taken: from NZTA Vehicle Portal > VIRMs > Entry certification > Technical bulletins > Exhaust emissions standard compliance 28 Exhaust
More informationCertificate of Approval NMI 12/1/8
Bradfield Road, West Lindfield NSW 2070 Certificate of Approval Issued by the Chief Metrologist under Regulation 60 of the National Measurement Regulations 1999 This is to certify that an approval for
More informationAS/NZS 4801:2001 Occupational Health and Safety Management
AS/NZS 4801:2001 Occupational Health and Safety Management AS/NZS 4801:2001 Occupational Health and Safety Management AS/NZS 4801:2001 Occupational Health and Safety Management 16 16 16 16 16 16 1195
More informationIMPORTANT INFORMATION ABOUT THIS APPLICATION
MotorSport NZ Inc 69 Hutt Road, Thorndon PO Box 3793, Wellington 6015 Ph: 04 815 8015 Fax: 04 472 9011 Web: motorsport.org.nz SAFETY CAGE / ROLLBAR HOMOLOGATION APPLICATION Technical Form T002 IMPORTANT
More informationFOR NEW ZEALAND. T-604 WASTE DISPOSER B. HYDRAULIC CHARACTERISTICS &TECHNICAL SPECIFICATIONS. DECLARATION OF COMPLIANCE
FOR NEW ZEALAND. T-604 WASTE DISPOSER B. HYDRAULIC CHARACTERISTICS &TECHNICAL SPECIFICATIONS. Maximum height of pumped discharge: 6 m Max. Graded distance of pumped discharge: 62 m : Location of power
More informationUtilities (Technical Regulation) (Electricity Transmission Supply Code) Approval 2016 (No 1)*
Australian Capital Territory Utilities (Technical Regulation) (Electricity Transmission Supply Code) Approval 2016 (No 1)* Disallowable instrument DI2016 189 made under the Utilities Technical Regulation
More informationDEPARTMENT OF TRADE AND INDUSTRY NO APRIL 2016
Trade and Industry, Department of/ Handel en Nywerheid, Departement van 438 National Regulator for Compulsory Specifications Act (5/2008): Amendments to the Compulsory Specification for Earth Leakage Protection
More informationComb busbars. Description Part No. $NZ
Comb busbars FTG comb type busbars are constructed of three copper conductors within a single moulding for connection to Jean Müller LTL000-3/9 or LTL00-3/9 horizontal fuse disconnects. The busbar is rated
More information