T-TYPE / W T-TYPE/W. Aggressive environments. IP66 for aggressive environments. MULTIPOLE CONNECTORS T-TYPE/W Technical data CN

Transcription

1 ULTIPOLE CONNECTORS T-TYPE/W Technical data CN i T-TYPE / W Aggressive environments T-TYPE / W Enclosures in thermoplastic material, dark grey RAL 7012 colour, with high thicknesses providing structural solidity and durability. Built-in VITON fluoroelastomer sealing s. Locking levers in thermoplastic material colour grey RAL , 32 and 40 threaded cable entries. degree of protection according to. Each enclosure carries its own part number, thread size and conformity markings. Ambient temperature range: -40 C / +90 C. NOTE: As the characterizing element of the T-TYPE/W series is the different sealing material, hoods and covers without sealing s for these series are the same of T-TYPE Standard. VITON is a trade mark of DuPont Performance Elastomers LLC. DATA SHEETS AT PAGES T-TYPE/W OFFSHORE NAVAL SALT-SPRAYERS for aggressive environments 334

2 ULTIPOLE CONNECTORS T-TYPE/W Technical data CN i T-TYPE / W Featuring an original design, T-TYPE/W construction types available are: surface mounting housings with double entry of which one closed but threaded hoods with levers bulkhead mounting housings hoods with side entry hoods with top entry covers with pegs (for housings) with levers (for hoods) T-TYPE / W double lever, side and top entry, for other sizes 57.27, 77.27, double lever, side and top entry, for other sizes 57.27, 77.27, single lever, side and top entry, for size single lever, side and top entry, for size

3 T-TYPE / W insulating enclosures size AGGRESSIVE ENVIRONENTS i CDD poles + m 67 CDS... 9 poles + m 78 CSH... 6 poles + m 91 CNE, CSE... 6 poles + m 104 CCE... 6 poles + m 110 CSS... 6 poles + m 122 CT, CTSE (16A) *)... 6 poles + m 130 CQE poles + m 138 IXO... 2 modules housings with single lever hoods with 2 pegs insert centre distance: 44 x 27 mm description part No. entry part No. entry bulkhead mounting housing with thermoplastic levers THIW 06 L T-TYPE / W - size surface mounting housing with thermoplastic levers TAPW 06 L25 25 surface mounting housing with thermoplastic levers TAPW 06 L32 32 with pegs, side entry TAO 06 L25 25 with pegs, side entry TAO 06 L32 32 with pegs, top entry TAV 06 L25 25 with pegs, top entry TAV 06 L32 32 panel cut-out for bulkhead mounting housing in mm ø 4,5 THIW 06 L TAO 06 L25 and TAO 06 L , TAPW 06 L25 and TAPW 06 L32 TAV 06 L25 and TAV 06 L32 75 ( ) 73 Ø 5, , ( ) The surface mounting, high construction housings are supplied with an open threaded entry ( ) and diametrically opposite a closed threaded entry which can be opened by the user if required (with suitable tool). 336

4 T-TYPE / W insulating enclosures size AGGRESSIVE ENVIRONENTS i CDD poles + m 67 CDS... 9 poles + m 78 CSH... 6 poles + m 91 CNE, CSE... 6 poles + m 104 CCE... 6 poles + m 110 CSS... 6 poles + m 122 CT, CTSE (16A) *)... 6 poles + m 130 CQE poles + m 138 IXO... 2 modules hoods with single lever top entry covers insert centre distance: 44 x 27 mm description part No. entry part No. part No. (with eyelet) (with loop) with thermoplastic lever and TAVW 06 LG25 25 with thermoplastic lever and TAVW 06 LG32 32 with pegs TCHC 06 L TCHC 06 SL with thermoplastic lever and TAVW 06 LG25 e TAVW 06 LG TCHC 06 L (SL) THCW 06 LG T-TYPE / W - size THCW 06 LG eyelet loop 337

5 T-TYPE / W insulating enclosures size AGGRESSIVE ENVIRONENTS i CDD poles + m 69 CDS poles + m 79 CSH poles + m 92 CNE, CSE poles + m 105 CCE poles + m 111 CSS poles + m 123 CT, CTSE (16A) *).. 10 poles + m 131 CQE poles + m 139 CCE (aux) poles + m 148 CE (aux) poles + m 149 CSH (aux) poles + m 149 CX... 8/24 poles + m 169 IXO... 3 modules housings with double lever hoods with 4 pegs insert centre distance: 57 x 27 mm description part No. entry part No. entry bulkhead mounting housing with thermoplastic levers THIW 10 T-TYPE / W - size surface mounting housing with thermoplastic levers TAPW surface mounting housing with thermoplastic levers TAPW with pegs, side entry TAO with pegs, side entry TAO with pegs, top entry TAV with pegs, top entry TAV panel cut-out for bulkhead mounting housing in mm ø 4,5 THIW 10 TAO and TAO , TAPW and TAPW TAV and TAV Ø 5, The surface mounting, high construction housings are supplied with an open threaded entry and diametrically opposite a closed threaded entry which can be opened by the user if required (with suitable tool). 338

6 T-TYPE / W insulating enclosures size AGGRESSIVE ENVIRONENTS i CDD poles + m 69 CDS poles + m 79 CSH poles + m 92 CNE, CSE poles + m 105 CCE poles + m 111 CSS poles + m 123 CT, CTSE (16A) *).. 10 poles + m 131 CQE poles + m 139 CCE (aux) poles + m 148 CE (aux) poles + m 149 CSH (aux) poles + m 149 CX... 8/24 poles + m 169 IXO... 3 modules insert centre distance: 57 x 27 mm hoods with double lever top entry covers description part No. entry part No. part No. (with eyelet) (with loop) with thermoplastic levers and TAVW 10 G25 25 with thermoplastic levers and TAVW 10 G32 32 with 4 pegs TCHC 10 TCHC 10 S with 2 thermoplastic levers and TAVW 10 G25 and TAVW 10 G TCHC 10 (S) THCW 10 G T-TYPE / W - size THCW 10 G 113 eyelet loop 339

7 T-TYPE / W insulating enclosures size AGGRESSIVE ENVIRONENTS i CD poles + m 57 CDD poles + m 70 CDS poles + m 80 CSH poles + m 93 CNE, CSE poles + m 106 CCE poles + m 112 CSS poles + m 124 CT, CTSE (16A) *).. 16 poles + m 132 CQE poles + m 140 CQEE poles + m 1 CCE (aux) poles + m 150 CE, CSH (aux) poles + m 151 CP... 6 poles + m 162 CX... 6/36 and 12/2 poles + m CX... 4/0 and 4/2 poles + m 172 IXO... 4 modules insert centre distance: 77,5 x 27 mm housings with double lever hoods with 4 pegs description part No. entry part No. entry bulkhead mounting housing with thermoplastic levers THIW 16 T-TYPE / W - size surface mounting housing with thermoplastic levers TAPW surface mounting housing with thermoplastic levers TAPW with pegs, side entry TAO with pegs, side entry TAO with pegs, top entry TAV with pegs, top entry TAV panel cut-out for bulkhead mounting housing in mm ø 4,5 THIW 16 TAO and TAO , ,5 5 96,5 TAPW and TAPW TAV and TAV ,5 80 Ø 5, ,5 The surface mounting, high construction housings are supplied with an open threaded entry and diametrically opposite a closed threaded entry which can be opened by the user if required (with suitable tool). 340

8 T-TYPE / W insulating enclosures size AGGRESSIVE ENVIRONENTS i CD poles + m 57 CDD poles + m 70 CDS poles + m 80 CSH poles + m 93 CNE, CSE poles + m 106 CCE poles + m 112 CSS poles + m 124 CT, CTSE (16A) *).. 16 poles + m 132 CQE poles + m 140 CQEE poles + m 1 CCE (aux) poles + m 150 CE, CSH (aux) poles + m 151 CP... 6 poles + m 162 CX... 6/36 and 12/2 poles + m CX... 4/0 and 4/2 poles + m 172 IXO... 4 modules insert centre distance: 77,5 x 27 mm hoods with double lever top entry covers description part No. entry part No. part No. (with eyelet) (with loop) with thermoplastic levers and TAVW 16 G32 32 with thermoplastic levers and TAVW 16 G40 40 with 4 pegs TCHC 16 TCHC 16 S with 2 thermoplastic levers and THCW 16 G TAVW 16 G32 and TAVW 16 G40 133,5 TCHC 16 (S) T-TYPE / W - size ,5 96,5 THCW 16 G 133,5 96,5 eyelet loop 341

9 T-TYPE / W insulating enclosures size AGGRESSIVE ENVIRONENTS i CD poles + m 59 CDD poles + m 72 CDS poles + m 81 CSH poles + m 94 CNE, CSE poles + m 107 CCE poles + m 113 CSS poles + m 125 CT, CTSE (16A) *).. 24 poles + m 133 CQE... poles + m 141 CQEE poles + m 147 CCE (aux) poles + m 152 CE, CSH 10+2 (aux) poles + m 153 CCE (aux) poles + m 1 CE (aux) poles + m 159 CX... 4/8 and 6/6 poles + m 173 and 175 IXO... 6 modules insert centre distance: 104 x 27 mm housings with double lever hoods with 4 pegs description part No. entry part No. entry bulkhead mounting housing with thermoplastic levers THIW 24 T-TYPE / W - size surface mounting housing with thermoplastic levers TAPW surface mounting housing with thermoplastic levers TAPW with pegs, side entry TAO with pegs, side entry TAO with pegs, top entry TAV with pegs, top entry TAV panel cut-out for bulkhead mounting housing in mm ø 4,5 THIW 24 TAO and TAO , TAPW and TAPW TAV and TAV Ø 5, The surface mounting, high construction housings are supplied with an open threaded entry and diametrically opposite a closed threaded entry which can be opened by the user if required (with suitable tool). 342

10 T-TYPE / W insulating enclosures size AGGRESSIVE ENVIRONENTS i CD poles + m 59 CDD poles + m 72 CDS poles + m 81 CSH poles + m 94 CNE, CSE poles + m 107 CCE poles + m 113 CSS poles + m 125 CT, CTSE (16A) *).. 24 poles + m 133 CQE... poles + m 141 CQEE poles + m 147 CCE (aux) poles + m 152 CE, CSH 10+2 (aux) poles + m 153 CCE (aux) poles + m 1 CE (aux) poles + m 159 CX... 4/8 and 6/6 poles + m 173 and 175 IXO... 6 modules insert centre distance: 104 x 27 mm hoods with double lever top entry covers description part No. entry part No. part No. (with eyelet) (with loop) with thermoplastic levers and TAVW 24 G32 32 with thermoplastic levers and TAVW 24 G40 40 with 4 pegs TCHC 24 TCHC 24 S with 2 thermoplastic levers and THCW 24 G TAVW 24 G32 and TAVW 24 G TCHC 24 (S) 123 T-TYPE / W - size THCW 24 G eyelet loop 343

11 CR..BPE PE jumpers i CD... 40, 64 poles + m 57 and 59 CDD... 24, 42, 72, 108 poles + m CDS... 9, 18, 27, 42 poles + m CSH... 6, 10, 16, 24 poles + m CNE, CSE... 6, 10, 16, 24 poles + m CCE... 6, 10, 16, 24 poles + m CSS... 6, 10, 16, 24 poles + m CT, CTSE... 6, 10, 16, 24 poles + m CQE... 10, 18, 32, poles + m CQEE... 40, 64 poles + m CCE 3, 6, 10, 16+2 (aux) poles + m CSH... 3, 6, 10+2 (aux) poles + m CP... 6 poles + m 162 CX... 8/24, 6/36, 12/2 poles + m optional PE jumpers insert centre distance: 44 X 27 mm, 57 x 27 mm 77,5 x 27 mm, 104 x 27 mm description part No. Accessories galvanized brass, to be optionally used with T-TYPE enclosures series and COB systems. - for inserts size CR 06 BPE - for inserts size CR 10 BPE - for inserts size CR 16 BPE - for inserts size CR 24 BPE CR...BPE accessories PE (protective earth) jumpers could be mounted under the connector inserts for the connection of the two insert s PE plates. To guarantee to proper alignment of the insert inside the enclosure, it is necessary to use both jumpers supplied (in the same housing or hood); the jumpers are not usable individually. Furthermore the user is responsible for verifying the continuity of the PE connection m (male and female) independently of using CR...BPE earth jumpers. 366