10A/30A. Slip ring collector OPTIONS FEATURES CERTIFICATIONS

Transcription

1 Slip ring collector Slip ring collector consisting of rings coupled with brushes, designed to allow current to pass from a ixed to a rotating part and used to supply crane motors and cable winders. FEATURES Suitable for transmitting current with 50/0 Hz frequency. The enclosure has small downward holes for air circulation and to prevent problems due to moisture. The lower support plate is provided with three holes to drain any moisture that may form inside the unit. The enclosure is made of shock-resistant thermoplastic material to prevent contact with live electrical parts. IP protection degree: collector is classiied IP22. Extreme temperature resistance: -25 C to +70 C. OPTIONS Up to 40 rings coupled with brushes. Available with 30A line rings only or with 30A line rings and 10A auxiliary rings. Fitted with phosphor bronze or graphite brushes. CERTIFICATIONS CE marking and EAC certiication. Fill in the request form for accurate product coniguration. The data and the products illustrated in this brochure may be modiied without notice. Under no circumstances can their description have a contractual value. 1

2 POSSIBLE ASSEMBLIES Standard (section view) Standard 1 rings CERTIFICATIONS Conformity to Community Directives Conformity to CE Standards Markings and homologations 2014/35/UE Low Voltage Directive 200/42/CE Machinery Directive EN Safety of machinery - Electrical equipment of machines EN Plugs, socket-outlets and couplers for industrial purposes - General requirements EN 0529 Degrees of protection provided by enclosures C GENERAL TECHNICAL SPECIFICATIONS Storage -40 C/+70 C Ambient temperature Operational -25 C/+70 C IP protection degree IP 22 Insulation category Class I Operating positions Any position Cable clamps M20 Cable entry Cable clamps M25 ELECTRICAL SPECIFICATIONS Rated operational current Rated operational voltage Rated insulation voltage Max. speed Connections 10 A - 30 A 400 Vac 0 Vac 3 rev./min. Terminals with Ø 4 mm hole Terminals with M4 screw accepting ring connectors 2

3 STANDARD SLIP RING COLLECTORS AND OVERALL DIMENSIONS (mm) R Ø8 Ø A C S T W X B 80±5 Ø Y 0 Z A and 30A rings No. of rings 10A No. rings 30A Cable clamps type and position Dimensions (mm) Code S T W X Y Z A B C 1 4 M20 - M PF2305B M20 - M PF230B M20 M20 M M20 PF2307B M20 M20 M M20 PF2308B M20 M20 M M20 PF2309B M20 M20 M M20 PF2310B M20 M20 M M20 PF2311B M20 M20 M M20 PF2312B M20 M20 M M20 PF2313B M20 M20 M M20 PF2314B M20 M20 M M20 PF2315B M20 M20 M M20 PF231B Max No. of rings: A rings No.of rings 30A Cable clamps type and position Dimensions (mm) Code S T W X Y Z A B C 3 M20 - M PF2303B M20 - M PF2304B M20 - M PF2305B M20 - M PF230B M20 M20 M20 M PF2307B M20 M20 M20 M PF2308B M20 M20 M20 M PF2309B M20 M20 M20 M PF2310B M20 M20 M20 M PF2311B M20 M20 M20 M PF2312B M20 M20 M20 M PF2313B M20 M20 M20 M PF2314B M20 M20 M20 M PF2315B M20 M20 M20 M PF231B Max No. of rings:

4 ASSEMBLY DRAWING A1 A1 A2 A3 A4 A5 A2 A A2 A7 A8 A10 A9 A11 A12 A5 A13 Refer to the following tables for descriptions of components: Brushes and rings, Cable clamps and Accessories. 4

5 COMPONENTS Brushes and rings Ref. Drawing Description Code A Auxiliary ring 10A Line ring 30A PRSL400PE PRSL404PE A8 Brush-holder with brushes Codes on request A10 Earth brush PRSL402PI A11 Line brush PRSL4058PI A12 Auxiliary phosphor bronze brush Auxiliary graphite brush (2 brushes used as line brush) PRSL401PI PRVV9075PE Cable clamps Ref. Drawing Description Code A4 Cable clamp support PRSL900PI A5 Cable clamp M20 Cable clamp M25 PRPS1075PE PRPS107PE Accessories Ref. Drawing Description Code A1 Nut PRSL4010PE A2 Ring - pitch 1.5 PRSL4001PE A3 Cover - 1 hole Cover - 2 holes PRSL55PI PRSL570PI A7 Upper plate PRSL405PE A9 Lower plate PRSL4055PE A13 Protection Codes on request 5

6 - REQUEST FORM FOR NON STANDARD SLIP RING COLLECTOR Rings Cable clamps No. of 30A rings No. of 10A rings Brushes Graphite Phosphor bronze Tube length 1 2 M20 M25 Instructions - Write the number of 30A and 10A rings and the type of brushes required. - Write the input and output length of the tube required, when different from the length showed in the overall dimensions. - Write the type of cable clamps required on the upper cover and on the lower plate. Remarks