enclosures with IP67 V-Type closure

Transcription

1 250 enclosures with IP67 V-Type closure The performance requirements in connection protection are increasingly varied and specialized. To respond to this wide range of needs, ILE has developed several new solutions, including the innovative V-Type lever. The new lever, due to the vertical closing movement, offers an /IP67 degree of protection (according to ) when fitted with a complete and coupled connector and used with ILE standard hoods in die cast aluminium with pegs (without adaptor). The high degree of protection is therefore not dependant on the use of special gaskets or locking devices. The fixing flanges are the same as those fitted on traditional models. This means it is possible to use the new housings as alternatives to the traditional version without affecting the interchangeability, or changing dimensions, spaces, flanges or fixing positions. The new V-Type lever further extends the range, which includes the traditional version (LSS series), with springs and rollers and the insulated version (T-Type series), thus, offering customers a complete and custom selection for all needs. ILE is the ONLY company that offers a lever system for all possible requirements. The V-Type lever is the result of ongoing research on connection protection systems which confirms ILE as a proactive leader in new solutions with forty years experience. The new lever differs from other commercial ones because of its closing movement principle, consisting of 2 hinged elements that are then pivoted on the housing. This composite movement enables to move the lever above the pin of the housing that has to be fixed in place with an initial rotatory movement and then press it downwards to engage the locking mechanism. overview OPEN LOSE The tight seal after closure and the simplicity of the movement are key characteristics that only ILE has managed to combine into a single lever. The V-Type lever also has other interesting functional characteristics for several applications: The friction on the pin is almost zero because the lever exerts its pressure vertically, thus significantly reducing wear in case of frequent use. The complete lever is manufactured in and is fitted with a catch that prevents it from being accidentally detached. The absence of parts in plastic offers a higher resistance to impacts and in case of contact with oils and aggressive chemical substances or high ambient temperatures. The lever can be used for applications with vibrations because it has no springs and is therefore more rigid. The lever occupies a very small space during the closing phase. it is recommended in cases when the cable weight forces the levers to open, such as vertically installed connectors and the cable is mounted in the bottom. The interchangeability with equivalent traditional levers with springs and rollers simplifies the management of stocks, reduces costs and increases flexibility of use. vailable in bulkhead or surface-mounted versions for sizes with a single lever, 57.27, and with 2 levers. High construction models are available on request. The item code identifies the new series with the suffix 7 or 7: - 7I bulkhead mounting housing - 7P surface mounting housing, Pg thread, standard height - 7P surface mounting housing, metric thread, standard height - 7P surface mounting housing, Pg thread, high - 7P surface mounting housing, metric thread, high

2 251 enclosures with IP67 V-Type closure pproved for degrees of protection UL Type 4 (= NE 4), UL Type 4 (=NE 4) e UL Type 12 (=NE 12). Our enclosures have been certified by UL, according to the merican standard NSI/UL50, as Recognised omponents for the US and anada (curus mark) as accessories of our set of UL and S certified connector inserts (file UL E115072, file S _0_000). With connector complete and with appropriate cable glands, it is possible to guarantee IP69K protection rating compliant with IN (water jet at 80 (± 5 ) at a pressure of 80bar 100 bar, for a period of 30s for each angle of inclination (0, 30, 60 and 90 w.r.t the plane). mbient temperature limits from -40 to Enclosures can accommodate all connector inserts size 44.27, 57.27, and with crimp connection, screw, spring and the innovative Squich connection. E (to be crimped) and SE (with spring connection) series inserts cab be used for rated voltages up to 830V. On request a version that also allows the inclusion of E series fruits with rated voltage of 830V can be supplied, thanks to the additional insulation strips placed inside. For bulkhead mounting housings, /IP67 protection rating is guaranteed for mounting on a sufficiently rigid panel; use suitable length 4 screws (negligible surface buckling when subjected to tightening couple on the fixing screws of Nm or deformation caused by the weight of the complete connector). In case of insufficient rigidity use of 7.. FL flanges ( 259) is recommended, in which case use suitable length 4 screws and 4 flat/spring washers. In addition, the panel surface in contact with the flange gasket of the bulkhead mounting housings must be free from defects (deep scratches, grooves, burrs) that could negatively affect the performance of the gasket. It is recommended to complete the enclosure with appropriate cable glands and connections. The new series joins the family of traditional LSS series enclosures and will support the various solutions : standard (grey), for aggressive environments (black), for temperatures up to 180 (red), with protection rating IP68 and in thermoplastic insulating material (T-Type). overview IP67 1 lever size levers sizes 57.27, 77.27, lso available 1-lever fixed enclosures and hoods with lever/s: IP65 con sportello 1 lever sizes 57.27, 77.27, 104,27 IP65 with cover 1 lever sizes 44.27, 57.27, 77.27, levers sizes 57.27, 77.27,

3 252 enclosures with IP67 V-Type closure Threaded cable passage in various Pg diameters (types with pre-code ) or metric passage (types with pre-code ) in accordance with EN 60423, for cable entry devices in accordance with EN (NPT threading on request), may be located vertically, horizontally or frontally. overview Robust enclosures made of die cast aluminium alloy. Fixed surface-mounted, bulkhead and hood versions are available. etallic enclosures with a coated finish of epoxy-polyester with high resistance to mechanical stress and external agents. The inserts are made of UL certified selfextinguishing fibreglass reinforced thermoplastics, and feature an operating temperature range between -40 and Insert profile polarised with asymmetrical guides to avoid incorrect matings. The inserts have a mechanical life equal to or higher than 500 mating cycles. Inserts are manufactured in compliance with European standard EN (IN VE 0627), certified and identified with UL and S markings. Special seal gaskets in anti-aging, oil-resistant, fuel-resistant, vinyl nitrile elastomer. Stainless closure levers and springs guarantee a perfect closure and sealing. Locking device available in two versions, simple (with one lever), or double (with two levers). aptive insert fastening screws, with antislackening spring washer. ontact position identified with numbers or codes on both sides of each insert and printed with a laser system or from a die. Earthing terminal protection with ample contact surface

4 253 IP67 V-Type enclosure closing movements OPEN LOSE Lift the levers. Position the connector. overview Lower the levers. Hook the levers to the pegs. Remove the connector. Lower the lever until it clicks into place.

5 and 7-7 IP67 enclosures size V-Type lever version poles + m 59 QE poles + m 80 SH... 6 poles + m 88 E... 6 poles + m 94 NE, SE, JNE, JSE 6 poles + m 95 and 106 SS... 6 poles + m 118 T, TE, TSE *)... 6 poles + m 126 and 130 IO... 2 modules bulkhead mounting housings with single lever with lever surface mounting housings with single lever with lever insert centre distance: 44 x 27 mm IP67 IP67 description part no. part no. entry part no. entry Pg with lever, size I 06 L 7 - size with lever, size P 06 L 16 7P 06 L20 20 with lever, size P 06 L2 16 x 2 7P 06 L x 2 with lever, high construction, size P 06 L 21 7P 06 L32 32 with lever, high construction, size P 06 L2 21 x 2 7P 06 L x 2 with lever, high construction, size P 06 L P 06 L40 40 with lever, high construction, size P 06 L x 2 7P 06 L x 2 *) can be used only in bulkhead mounting housings panel cut-out for bulkhead mounting housings in mm 7I L 7P L - 7P L and 7P L - 7P L ø 4, , Ø 5,5 E F The new lever, due to the vertical closing movement, offers an /IP67 protection rating (according to EN 60529) when fitted with a complete and coupled connector and used with ILE standard hoods in die cast aluminum with pegs (without adaptor). For bulkhead mounting housings, /IP67 protection rating is guaranteed for mounting on a sufficiently rigid panel; use suitable length 4 screws (negligible surface buckling when subjected to tightening couple on the fixing screws of Nm or deformation caused by the weight of the complete connector). In case of insufficient rigidity use of 7.. FL flanges ( 259) is recommended, in which case use suitable length 4 screws and 4 (on the enclosure) and 4 (on the flange) flat/spring washers with 4 locknut. In addition, the panel surface in contact with the flange gasket of the bulkhead mounting housings must be free from defects (deep scratches, grooves, burrs) that could negatively affect the performance of the gasket. 7I 06 L E F 7P/7P 06 L P/7P 06 L Type 4/4/12

6 and 7-7 IP67 enclosures size V-Type lever version poles + m 61 QE poles + m 81 SH poles + m 89 E poles + m 96 NE, SE, JNE, JSE 10 poles + m 97 and 107 SS poles + m 119 T, TE, TSE *) poles + m127 and 131 SE (aux) poles + m 135 E (aux) poles + m /24 poles + m 151 IO... 3 modules bulkhead and surface mounting housings with 2 levers in surface mounting housings with 2 levers or 4 pegs with lever insert centre distance: 57 x 27 mm IP67 IP67 description part no. part no. entry part no. entry Pg with lever, size I 10 with levers, size P P with levers, size P x 2 7P x 2 with levers, high construction, size P P with levers, high construction, size P x 2 7P x 2 with levers, high construction, size P P with levers, high construction, size P x 2 7P x 2 *) can be used only in bulkhead mounting housings 7I 7P - 7P and 7P - 7P 7 - size panel cut-out for bulkhead mounting housings in mm ø 4, , Ø 5,5 E F I I E F 7P/7P ,5 7P/7P ,5 The new lever, due to the vertical closing movement, offers an /IP67 protection rating (according to EN 60529) when fitted with a complete and coupled connector and used with ILE standard hoods in die cast aluminum with pegs (without adaptor). For bulkhead mounting housings, /IP67 protection rating is guaranteed for mounting on a sufficiently rigid panel; use suitable length 4 screws (negligible surface buckling when subjected to tightening couple on the fixing screws of Nm or deformation caused by the weight of the complete connector). In case of insufficient rigidity use of 7.. FL flanges ( 259) is recommended, in which case use suitable length 4 screws and 4 (on the enclosure) and 4 (on the flange) flat/spring washers with 4 locknut. In addition, the panel surface in contact with the flange gasket of the bulkhead mounting housings must be free from defects (deep scratches, grooves, burrs) that could negatively affect the performance of the gasket. 58 Type 4/4/12

7 and 7-7 IP67 enclosures size V-Type lever version poles + m 59 T, TS (10) poles + m poles + m 62 QE poles + m 82 SH poles + m 90 E poles + m 98 NE, SE, JNE, JSE 16 poles + m 99 and 108 SS poles + m 120 T, TE, TSE (16) *) 16 poles + m 128 and 132 SE (aux) poles + m 137 E (aux) poles + m 136 P... 6 poles + m /36 e 12/2 poles + m /0 and 4/2 poles + m 154 IO... 4 modules insert centre distance: 77.5 x 27 mm bulkhead and surface mounting housings with 2 levers in surface mounting housings with 2 levers or 4 pegs with lever description part no. part no. entry part no. entry Pg with levers, size I 16 IP67 IP size with lever, size P P with lever, size P x 2 7P x 2 with lever, high construction, size P P with lever, high construction, size P x 2 7P x 2 with lever, high construction, size P P with lever, high construction, size P x 2 7P x 2 *) can be used only in bulkhead mounting housings 7I 7P - 7P and 7P - 7P panel cut-out for bulkhead mounting housings in mm ø 4, , Ø 5,5 E F I I E F 7P/7P P/7P The new lever, due to the vertical closing movement, offers an /IP67 protection rating (according to EN 60529) when fitted with a complete and coupled connector and used with ILE standard hoods in die cast aluminum with pegs (without adaptor). For bulkhead mounting housings, /IP67 protection rating is guaranteed for mounting on a sufficiently rigid panel; use suitable length 4 screws (negligible surface buckling when subjected to tightening couple on the fixing screws of Nm or deformation caused by the weight of the complete connector). In case of insufficient rigidity use of 7.. FL flanges ( 259) is recommended, in which case use suitable length 4 screws and 4 (on the enclosure) and 4 (on the flange) flat/spring washers with 4 locknut. In addition, the panel surface in contact with the flange gasket of the bulkhead mounting housings must be free from defects (deep scratches, grooves, burrs) that could negatively affect the performance of the gasket. Type 4/4/12

8 and 7-7 IP67 enclosures size V-Type lever version poles + m 51 T, TS (10) poles + m poles + m 64 QE poles + m 83 SH poles + m 91 E poles + m 100 NE, SE, JNE, JSE 24 poles + m 101 and 109 SS poles + m 121 T, TE, TSE (16) *) 24 poles + m 129 and 133 SE (aux) poles + m 139 E (aux) poles + m /8 poles + m 155 IO... 6 modules insert centre distance: 104 x 27 mm bulkhead and surface mounting housings with 2 levers in IP67 surface mounting housings with 2 levers or 4 pegs with lever IP67 description part no. part no. entry part no. entry Pg with levers, size I 24 with lever, size P P with lever, size P x 2 7P x 2 with lever, high construction, size P P with lever, high construction, size P x 2 7P x 2 with lever, high construction, size P P with lever, high construction, size P x 2 7P x 2 *) can be used only in bulkhead mounting housings panel cut-out for bulkhead mounting housings in mm ø 4,5 7I 58 7P - 7P and 7P - 7P size , Ø 5,5 E F I I E F 7P/7P P/7P The new lever, due to the vertical closing movement, offers an /IP67 protection rating (according to EN 60529) when fitted with a complete and coupled connector and used with ILE standard hoods in die cast aluminum with pegs (without adaptor). For bulkhead mounting housings, /IP67 protection rating is guaranteed for mounting on a sufficiently rigid panel; use suitable length 4 screws (negligible surface buckling when subjected to tightening couple on the fixing screws of Nm or deformation caused by the weight of the complete connector). In case of insufficient rigidity use of 7.. FL flanges ( 259) is recommended, in which case use suitable length 4 screws and 4 (on the enclosure) and 4 (on the flange) flat/spring washers with 4 locknut. In addition, the panel surface in contact with the flange gasket of the bulkhead mounting housings must be free from defects (deep scratches, grooves, burrs) that could negatively affect the performance of the gasket. Type 4/4/12

9 H - and H - enclosures standard version...40, 64 poles + m 49 and , 42, 72, 108 poles + m QE... 10, 18, 32, 46 poles + m SH... 6, 10, 16, 24 poles + m E... 6, 10, 16, 24 poles + m NE, SE... 6, 10, 16, 24 poles + m JNE, JSE *) 6, 10, 16, 24 poles + m SE , 6+ 2, poles + m E , 6+ 2, poles + m P... 6 poles + m /24, 6/36, 12/2 poles + m /0, 4/2, 4/8 poles + m IO... 2, 3, 4, 6 modules insert centre distance: 44 x 27 mm, 57 x 27 mm, 77,5 x 27 mm, 104 x 27 mm hoods with 2 pegs hoods with 4 pegs description part no. entry part no. entry part no. entry part no. entry Pg Pg with pegs, side entry, size HO 06 L HO 06 L20 20 with pegs, side entry, size HO 06 L16 16 HO 06 L25 25 with pegs, side entry, high construction, size FO 06 L21 21 FO 06 L25 25 with pegs, side entry, high construction, size FO 06 L29 29 FO 06 L TYPE with pegs, side entry, size HO HO with pegs, side entry, size HO with pegs, side entry, high construction, size O O with pegs, side entry, high construction, size O O with pegs, side entry, size HO HO with pegs, side entry, size HO with pegs, side entry, high construction, size O O with pegs, side entry, high construction, size O O with pegs, side entry, size HO HO with pegs, side entry, size HO with pegs, side entry, high construction, size O O with pegs, side entry, high construction, size O O with pegs, top entry, size HV 06 L HV 06 L20 20 with pegs, top entry, size HV 06 L16 16 HV 06 L25 25 with pegs, top entry, high construction, size FV 06 L21 21 FV 06 L25 25 with pegs, top entry, high construction, size FV 06 L29 29 FV 06 L32 32 with pegs, top entry, size HV HV with pegs, top entry, size HV with pegs, top entry, high construction, size V V with pegs, top entry, high construction, size V V with pegs, top entry, size HV HV with pegs, top entry, size HV with pegs, top entry, high construction, size V V with pegs, top entry, high construction, size V V with pegs, top entry, size HV HV with pegs, top entry, size HV with pegs, top entry, size HV HV with pegs, top entry, high construction, size V V with pegs, top entry, high construction, size V V HO L - FO L and HO L - FO L HV L - FV L and HV L - FV L HO - O and HO - O HV - V and HV - V The new lever, due to the vertical closing movement, offers an /IP67 protection rating (according to EN 60529) when fitted with a complete and coupled connector and used with ILE standard hoods in die cast aluminum with pegs (without adaptor). IP67 Type 4/4/12 HO/HO HO/HO HO/HO HO/HO FO/FO O/O O/O O/O HV/HV HV/HV HV/HV HV/HV FV/FV V/V V/V V/V

10 accessories for multiple connectors covers frames for bulkhead mounting housings description part no. part no. part no. with 2 pegs with 4 pegs - used with enclosures size H 06 L - used with enclosures size H 10 - used with enclosures size H 16 - used with enclosures size H 24 size size size size The covers do not provide protection rating /IP67. H 7 06 FL 7 10 FL 7 16 FL 7 24 FL 7..FL 4 -TYPE for enclosures with 2 levers H L for enclosures with 1 lever H - H L FL FL FL FL Type 4/4/12 259

11 V enclosures size V-Type lever version poles + m 59 QE poles + m 80 SH... 6 poles + m 88 E... 6 poles + m 94 NE, SE, JNE, JSE 6 poles + m 95 and 106 SS... 6 poles + m 118 T, TE, TSE (16)... 6 poles + m 126 and 130 IO... 2 modules bulkhead mounting housings with single lever insert centre distance: 44 x 27 mm description part no. with lever and cover in aluminium, size VI 06 LS with lever and cover in plastic, size VI 06 LP V-TYPE - size panel cut-out for bulkhead mounting housings in mm ø 4.5 VI LS/LP type VI N: the enclosures ensure protection (or IP65 cover versions) rating when mated and locked with the closing levers. type VI 06 LS/LP Type 4/4/12 (excluding enclosures with plastic cover) IP65 260

12 261 V - V and V - V enclosures size V-Type lever version poles + m 59 QE poles + m 80 SH... 6 poles + m 88 E... 6 poles + m 94 NE, SE, JNE, JSE 6 poles + m 95 and 106 SS... 6 poles + m 118 IO... 2 modules surface mounting housings with single lever and plastic cover surface mounting housings with single lever and aluminium cover insert centre distance: 44 x 27 mm description part no. entry part no. entry part no. entry part no. entry Pg Pg with lever and cover, size VP 06 LP 16 VP 06 LP20 20 VP 06 LS 16 VP 06 LS20 20 with lever and cover, size VP 06 LP2 16 x 2 VP 06 LP x 2 VP 06 LS2 16 x 2 VP 06 LS x 2 with lever and cover, high construction, size VP 06 LP 21 VP 06 LP32 32 VP 06 LS 21 VP 06 LS32 32 with lever and cover, high construction, size VP 06 LP2 21 x 2 VP 06 LP x 2 VP 06 LS2 21 x 2 VP 06LS x 2 with lever and cover, high construction, size VP 06 LP29 29 VP 06 LP40 40 VP 06 LS29 29 VP 06 LS40 40 with lever and cover, high construction, size VP 06 LP x 2 VP 06 LP x 2 VP 06LS x 2 VP 06LS x 2 VP LP - VP LP and VP LP - VP LP VP LS - VP LS and VP LS - VP LS V-TYPE - size Ø 5.5 Ø 5.5 E F 4 E F 4 N: the enclosures ensure protection (or IP65 cover versions) rating when mated and locked with the closing levers. type E F VP/VP 06 LP VP/VP 06 LP type E F VP/VP 06 LS VP/VP 06 LS Type 4/4/12 (excluding enclosures with plastic cover) IP65

13 V - V and V - V enclosures size V-Type lever version poles + m 59 QE poles + m 80 SH... 6 poles + m 88 E... 6 poles + m 94 NE, SE, JNE, JSE..6 poles + m 95 and 106 SS... 6 poles + m 118 IO... 2 modules hoods top entry with gasket and 1 lever insert centre distance: 44 x 27 mm description part no. entry part no. entry Pg with lever, size VV 06 LG 16 HV 06 LG25 25 with lever, high construction, size VV 06 LG21 21 VV 06 LG25 25 with lever, high construction, size VV 06 LG29 29 VV 06 LG32 32 V-TYPE - size with lever, high construction, without adapter, size VFV 06 LG21 21 VFV 06 LG25 25 with lever, high construction, without adapter, size VFV 06 LG29 29 VFV 06 LG32 32 VV LG - VV LG - VFV LG and VV LG - VV LG - VFV LG type VV/VV 06 LG VV/VV 06 LG VFV/VFV 06 LG

14

15 264 V enclosures size V-Type lever version poles + m 61 QE poles + m 81 SH poles + m 98 E poles + m 96 NE, SE, JNE, JSE 10 poles + m 97 and 107 SS poles + m 119 T, TE, TSE (16).. 10 poles + m 127 and 131 SE (aux) poles + m 135 E (aux) poles + m 134 E (aux) poles + m /24 poles + m 151 IO... 3 modules bulkhead mounting housings with single lever bulkhead mounting housings with single lever insert centre distance: 57 x 27 mm description part no. part no. with lever, size VI 10 L with lever and cover in aluminium, size VI 10 LS V-TYPE - size with lever and cover in plastic, size panel cut-out for bulkhead mounting housings in mm ø 4.5 VI L VI 10 LP VI LS/LP < type VI N: the enclosures ensure protection (or IP65 cover versions) rating when mated and locked with the closing levers. type VI 10 L type VI 10 LS/LP

16 V - V and V - V enclosures size V-Type lever version poles + m 61 QE poles + m 81 SH poles + m 89 E poles + m 96 NE, SE, JNE, JSE 10 poles + m 97 and 107 SS poles + m 119 SE (aux) poles + m 135 E (aux) poles + m /24 poles + m 151 IO... 3 modules surface mounting housings with single lever insert centre distance: 57 x 27 mm description part no. entry part no. entry Pg with lever/s, size VP 10 L 16 VP 10 L20 20 with lever/s, size VP 10 L2 16 x 2 VP 10 L x 2 with lever/s, high construction, size VP 10 L21 21 VP 10 L32 32 with lever/s, high construction, size VP 10 L x 2 VP 10 L x 2 with lever/s, high construction, size VP 10 L29 29 VP 10 L40 40 with lever/s, high construction, size VP 10 L x 2 VP 10 L x 2 VP L - VP L and VP L - VP L V-TYPE - size Ø 5.5 E F 4 type E F VP/VP 10 L VP/VP 10 L

17 266 V - V and V - V enclosures size V-Type lever version poles + m 61 QE poles + m 81 SH poles + m 98 E poles + m 96 NE, SE, JNE, JSE 10 poles + m 97 and 107 SS poles + m 119 SE (aux) poles + m 135 E (aux) poles + m /24 poles + m 151 IO... 3 modules surface mounting housings with single lever and plastic cover surface mounting housings with single lever and aluminium cover insert centre distance: 57 x 27 mm description part no. entry part no. entry part no. entry part no. entry Pg Pg V-TYPE - size with lever and cover, size VP 10 LP 16 VP 10 LP20 20 VP 10 LS 16 VP 10 LS20 20 with lever and cover, size VP 10 LP2 16 x 2 VP 10 LP x 2 VP 10 LS2 16 x 2 VP 10 LS x 2 with lever and cover, high construction, size VP 10 LP21 21 VP 10 LP32 32 VP 10 LS 21 VP 10 LS32 32 with lever and cover, high construction, size VP 10 LP x 2 VP 10 LP x 2 VP 10 LS2 21 x 2 VP 10LS x 2 with lever and cover, high construction, size VP 10 LP29 29 VP 10 LP40 40 VP 10 LS29 29 VP 10 LS40 40 with lever and cover, high construction, size VP 10 LP x 2 VP 10 LP x 2 VP 10LS x 2 VP 10LS x 2 N: the enclosures ensure protection (or IP65 cover versions) rating when mated and locked with the closing levers. VP LP - VP LP and VP LP - VP LP VP LS - VP LS and VP LS - VP LS Ø 5.5 Ø 5.5 E F 4 E F 4 type E F VP/VP 10 LP VP/VP 10 LP type E F VP/VP 10 LS VP/VP 10 LS

18 267 V - V and V - V enclosures size V-Type lever version poles + m 61 QE poles + m 81 SH poles + m 98 E poles + m 96 NE, SE, JNE, JSE 10 poles + m 97 and 107 SS poles + m 119 SE (aux) poles + m 135 E (aux) poles + m /24 poles + m 151 IO... 3 modules hoods, top entry, with gasket, with 2 pegs hoods, top entry, with gasket, with 4 pegs insert centre distance: 57 x 27 mm description part no. entry part no. entry part no. entry part no. entry Pg Pg with lever/s, size VV 10 LG 16 HV 10 LG25 25 VV 10 G 16 VV 10 G25 25 with lever/s, high construction, size VV 10 LG 21 VV 10 LG25 25 VV 10 G21 21 VV 10 G25 25 with lever/s, high construction, size VV 10 LG29 29 VV 10 LG32 32 VV 10 G29 29 VV 10 G32 32 with lever/s, high construction, without adapter, size VFV 10 LG21 21 VFV 10 LG25 25 VFV 10 G21 21 VFV 10 G25 25 with lever/s, high construction, without adapter, size VFV 10 LG29 29 VFV 10 LG32 32 VFV 10 G29 29 VFV 10 G32 32 N: the enclosures ensure protection (or IP65 cover versions) rating when mated and locked with the closing levers. VV LG - VV LG - VFV LG and VV LG - VV LG - VFV LG VV G - VV G - VFV G and VV G - VV G - VFV G V-TYPE - size type VV/VV 10 LG VV/VV 10 LG VFV/VFV 10 LG type VV/VV 10 G VV/VV 10 G VFV/VFV 10 G

19 268 V enclosures size V-Type lever version poles + m 49 T, TS (10) poles + m poles + m 62 QE poles + m 82 SH poles + m 90 E poles + m 98 NE, SE, JNE, JSE 16 poles + m 99 and 108 SS poles + m 120 T, TE, TSE (16).. 16 poles + m 128 and 132 SE, E (aux) poles + m 136 and 137 E (aux) poles + m 137 P... 6 poles + m /36 and 12/2 poles + m /0 and 4/2 poles + m 154 IO... 4 modules insert centre distance: 77.5 x 27 mm bulkhead mounting housings with single lever bulkhead mounting housings with single lever description part no. part no. with lever, size VI 16 L with lever and cover in aluminium, size VI 16 LS V-TYPE - size with lever and cover in plastic, size panel cut-out for bulkhead mounting housings in mm ø 4.5 VI L VI 16 LP VI LS/LP type VI N: the enclosures ensure protection (or IP65 cover versions) rating when mated and locked with the closing levers. type VI 16 L type VI 16 LS/LP

20 V - V and V - V enclosures size V-Type lever version poles + m poles + m 62 QE poles + m 82 SH poles + m 90 E poles + m 98 NE, SE, JNE, JSE 16 poles + m 99 and 108 SS poles + m 120 SE (aux) poles + m 137 E (aux) poles + m 136 P... 6 poles + m /36 and 12/2 poles + m /0 and 4/2 poles + m 154 IO... 4 modules surface mounting housings with single lever insert centre distance: 77.5 x 27 mm description part no. entry part no. entry Pg with lever, size VP 16 L 21 VP 16 L25 25 with lever, size VP 16 L2 21 x 2 VP 16 L x 2 with lever, high construction, size VP 16 L21 21 VP 16 L32 32 with lever, high construction, size VP 16 L x 2 VP 16 L x 2 with lever, high construction, size VP 16 L29 29 VP 16 L40 40 with lever, high construction, size VP 16 L x 2 VP 16 L x 2 VP L - VP L and VP L - VP L V-TYPE - size Ø 5.5 E F 4 type E F VP/VP 16 L VP/VP 16 L

21 V - V and V - V enclosures size V-Type lever version poles + m poles + m 62 QE poles + m 82 SH poles + m 90 E poles + m 98 NE, SE, JNE, JSE 16 poles + m 99 and 108 SS poles + m 120 SE (aux) poles + m 137 E (aux) poles + m 136 P... 6 poles + m /36 and 12/2 poles + m /0 and 4/2 poles + m 154 IO... 4 modules surface mounting housings with single lever and plastic cover surface mounting housings with single lever and aluminium cover insert centre distance: 77.5 x 27 mm description part no. entry part no. entry part no. entry part no. entry Pg Pg V-TYPE - size with lever and cover, size VP 16 LP 21 VP 16 LP25 25 VP 16 LS 21 VP 16 LS25 25 with lever and cover, size VP 16 LP2 21 x 2 VP 16 LP x 2 VP 16 LS2 21 x 2 VP 16 LS x 2 with lever and cover, high construction, size VP 16 LP21 21 VP 16 LP32 32 VP 16 LS 21 VP 16 LS32 32 with lever and cover, high construction, size VP 16 LP x 2 VP 16 LP x 2 VP 16 LS2 21 x 2 VP 16LS x 2 with lever and cover, high construction, size VP 16 LP29 29 VP 16 LP40 40 VP 16 LS29 29 VP 16 LS40 40 with lever and cover, high construction, size VP 16 LP x 2 VP 16 LP x 2 VP 16LS x 2 VP 16LS x 2 N: the enclosures ensure protection (or IP65 cover versions) rating when mated and locked with the closing levers. VP LP - VP LP and VP LP - VP LP VP LS - VP LS and VP LS - VP LS Ø 5.5 Ø 5.5 E F 4 E F 4 type E F VP/VP 16 LP VP/VP 16 LP type E F VP/VP 16 LS VP/VP 16 LS

22 271 V - V and V - V enclosures size V-Type lever version poles + m poles + m 62 QE poles + m 82 SH poles + m 90 E poles + m 98 NE, SE, JNE, JSE 16 poles + m 99 and 108 SS poles + m 120 SE (aux) poles + m 137 E (aux) poles + m 136 P... 6 poles + m /36 and 12/2 poles + m /0 and 4/2 poles + m 154 IO... 4 modules hoods top entry with gasket and 1 lever, 2 levers hoods, top entry, with gasket, with 4 pegs insert centre distance: 77.5 x 27 mm description part no. entry part no. entry part no. entry part no. entry Pg Pg with lever/s, size VV 16 LG 21 VV 16 LG32 32 VV 16 G 21 VV 16 G32 32 with levers, high construction, size VV 16 LG 21 VV 16 LG25 25 VV 16 G21 21 VV 16 G25 25 with levers, high construction, size VV 16 LG29 29 VV 16 LG32 32 VV 16 G29 29 VV 16 G32 32 with lever/s, high construction, without adapter, size VFV 16 LG21 21 VFV 16 LG25 25 VFV 16 G21 21 VFV 16 G25 25 with lever/s, high construction, without adapter, size VFV 16 LG29 29 VFV 16 LG32 32 VFV 16 G29 29 VFV 16 G32 32 VV LG - VV LG - VFV LG and VV LG - VV LG - VFV LG VV G - VV G - VFV G and VV G - VV G - VFV G V-TYPE - size type VV/VV 16 LG VV/VV 16 LG VFV/VFV 16 LG type VV/VV 16 G VV/VV 16 G VFV/VFV 16 G

23 V enclosures size V-Type lever version poles + m 51 T, TS (10) poles + m poles + m 64 QE poles + m 83 SH poles + m 91 E poles + m 100 NE, SE, JNE, JSE 24 poles + m 101 and 109 SS poles + m 121 T, TE, TSE (16) poles + m 129 and 133 SE (aux) poles + m 139 E (aux) poles + m /8 poles + m 155 IO... 6 modules bulkhead mounting housings with single lever bulkhead mounting housings with single lever insert centre distance: 104 x 27 mm description part no. part no. with lever, size VI 24 L with lever and cover in aluminium, size VI 24 LS V-TYPE - size with lever and cover in plastic, size *) can be used only in bulkhead mounting housings panel cut-out for bulkhead mounting housings in mm ø 4.5 VI L VI 24 LP VI LS/LP type VI N: the enclosures ensure protection (or IP65 cover versions) rating when mated and locked with the closing levers. type VI 24 L type VI 24 LS/LP

24 V - V and V - V enclosures size V-Type lever version poles + m poles + m 64 QE poles + m 83 SH poles + m 91 E poles + m 100 NE, SE, JNE, JSE 24 poles + m 101 and 109 SS poles + m 121 SE (aux) poles + m 139 E (aux) poles + m /8 poles + m 155 IO... 6 modules surface mounting housings with single lever insert centre distance: 104 x 27 mm description part no. entry part no. entry Pg with lever, size VP 24 L 21 VP 24 L25 25 with lever, size VP 24 L2 21 x 2 VP 24 L x 2 with lever, high construction, size VP 24 L21 21 VP 24 L32 32 with lever, high construction, size VP 24 L x 2 VP 24 L x 2 with lever, high construction, size VP 24 L29 29 VP 24 L40 40 with lever, high construction, size VP 24 L x 2 VP 24 L x 2 VP L - VP L and VP L - VP L V-TYPE - size Ø 5.5 E F 4 type E F VP/VP 24 L VP/VP 24 L

25 V - V and V - V enclosures size V-Type lever version poles + m poles + m 64 QE poles + m 83 SH poles + m 91 E poles + m 100 NE, SE, JNE, JSE...24 poles + m 101 and 109 SS poles + m 121 SE (aux) poles + m 139 E (aux) poles + m /8 poles + m 155 IO... 6 modules surface mounting housings with single lever and plastic cover surface mounting housings with single lever and aluminium cover insert centre distance: 104 x 27 mm description part no. entry part no. entry part no. entry part no. entry Pg Pg V-TYPE - size with lever and cover, size VP 24 LP 21 VP 24 LP25 25 VP 24 LS 21 VP 24 LS25 25 with lever and cover, size VP 24 LP2 21 x 2 VP 24 LP x 2 VP 24 LS2 21 x 2 VP 24 LS x 2 with lever and cover, high construction, size VP 24 LP21 21 VP 24 LP32 32 VP 24 LS 21 VP 24 LS32 32 with lever and cover, high construction, size VP 24 LP x 2 VP 24 LP x 2 VP 24 LS2 21 x 2 VP 24LS x 2 with lever and cover, high construction, size VP 24 LP29 29 VP 24 LP40 40 VP 24 LS29 29 VP 24 LS40 40 with lever and cover, high construction, size VP 24 LP x 2 VP 24 LP x 2 VP 24LS x 2 VP 24LS x 2 N: the enclosures ensure protection (or IP65 cover versions) rating when mated and locked with the closing levers. VP LP - VP LP and VP LP - VP LP VP LS - VP LS and VP LS - VP LS Ø 5.5 Ø 5.5 E F 4 E F 4 type E F VP/VP 24 LP VP/VP 24 LP type E F VP/VP 24 LS VP/VP 24 LS

26 275 V - V and V - V enclosures size V-Type lever version poles + m poles + m 64 QE poles + m 83 SH poles + m 91 E poles + m 100 NE, SE, JNE, JSE 24 poles + m 101 and 109 SS poles + m 121 SE (aux) poles + m 139 E (aux) poles + m /8 poles + m 155 IO... 6 modules hoods top entry with gasket and 1 lever, 2 levers hoods, top entry, with gasket, with 4 pegs insert centre distance: 104 x 27 mm description part no. entry part no. entry part no. entry part no. entry Pg Pg with lever/s, size VV 24 LG 21 VV 24 LG32 32 VV 24 G 21 VV 24 G32 32 with levers, high construction, size VV 24 LG 21 VV 24 LG25 25 VV 24 G21 21 VV 24 G25 25 with levers, high construction, size VV 24 LG29 29 VV 24 LG32 32 VV 24 G29 29 VV 24 G32 32 with lever/s, high construction, without adapter, size VFV 24 LG21 21 VFV 24 LG25 25 VFV 24 G21 21 VFV 24 G25 25 with lever/s, high construction, without adapter, size VFV 24 LG29 29 VFV 24 LG32 32 VFV 24 G29 29 VFV 24 G32 32 VV LG - VV LG - VFV LG and VV LG - VV LG - VFV LG VV G - VV G - VFV G and VV G - VV G - VFV G V-TYPE - size type VV/VV 24 LG VV/VV 24 LG VFV/VFV 24 LG type VV/VV 24 G VV/VV 24 G VFV/VFV 24 G

27 06_ustodie T-TYPE_G _ustodie T-TYPE_G 08/11/ Pagina 276

28 characteristics T-Type insulating enclosures T-TYPE - overview longside the wide range of traditional metallic enclosures for ILE multipole connectors, there is now available a new series of enclosures in self-extinguishing thermoplastic material in the most common sizes of 44.27, 57.27, and Quality and low cost are the main features of these enclosures, as an outcome of careful product studies. Valuable characteristics of these new enclosures: - significant structural solidity and mechanical robustness by virtue of substantial thickness; - resistance to the main chemical agents, found in industrial environments (see tab. 281); - pre-fastened gaskets for easier installation; - external dimensions of the bulkhead mounting housings are similar to those of the corresponding metallic enclosures; hole fixing centres are unchanged. 278

29

30 characteristics T-Type insulating enclosures - ample space inside enclosures for cables, with mounted connectors, similar to the corresponding metal high construction versions; - possibility of making completely insulated constructions (equivalent to lass II); - the surface mounting high construction housings are supplied with an open threaded entry and diametrically opposite a closed threaded entry, which can be opened by the user, if required (with suitable tool). - absence of powder paint for environments in which these are not recommended; - non-electrostatic thermoplastic material. - manufactured from insulating material, do not require special reinforced insulation as the metal versions do, for use with series E higher voltage connector inserts (screw-type terminals); - protection rating for coupled connectors is IP65 according to norm IE/; - UL Type 12 (= NE 12) degree of protection according to merican standards NSI/UL 50 for indoor use; - each enclosure carries its own part number and conformity markings; - ambient temperature range: -40 / +90 T-TYPE - overview Featuring an original design, construction types available are: bulkhead mounting housings; surface mounting housings (with double entry of which one closed but threaded); single lever, side and top entry, for size ( ); cover (for housings). hood with side entry; hood with top entry; single lever, side and top entry, for other sizes ( 57.27, 77.27, ) ll used materials conform with the RoHS 2002/95/E irective and subsequent modifications. 279

31 introduction New T-Type series insulating enclosures 1. onstruction Using the -UL moulding technique and use of IL.O material, these enclosures are structurally solid and mechanically robust, due to their increased thickness. They are particularly resistant to the main pollutants present in industrial environments. The lever enclosure pegs are built into the enclosures. The methods for fastening the connectors to the enclosures are made of 3 threaded metal inserts. With reference to metal construction, which to comply with electrical installation safety norms, must be earthed via a metal 5 connection to the grounding terminal of the inserts inside the enclosure, the new series of enclosures offers a solution for total insulation constructions (equivalent to class II) where necessary. The thermoplastic material used is RL 7012 dark grey colour and UL 94V-2 grade self-extinguishing and has passed glow wire testing in accordance with the IE (EN) at 650 in compliance with intended uses. 2. Gaskets Gaskets have been produced by means of the FIPFG technology (Formed-In-Place-Foam-Gasket). They have therefore been incorporated in the base flange on bulkhead mounting housings for easier installation Levers The locking levers have been produced in self-extinguishable thermoplastic material coloured grey RL T-TYPE - overview 4. imensions The internal dimensions allow mounting of all connector inserts in their relevant sizes. The external dimensions of the bulkhead mounting housings are similar to those of the corresponding metallic enclosures; hole fixing centres are unchanged. Hoods offer an inner cabling space similar to that of the high construction models of the corresponding metal enclosures. Other characteristics are in compliance with the applicable safety standard for electrical connectors, IE/EN able entries The housing and hood cable entries are available with metric thread, respectively: 25 or 32 for smaller sizes and or 40 for larger sizes and The surface mounting, high construction housings are supplied with an open threaded entry and diametrically opposite a closed threaded entry which can be opened by the user if required (with suitable tool). The recent standard IE/EN regarding metric cable entries for multipole electrical connectors for heavy duty uses, which standardises some main dimensions for entries and their related 2 accessories (gaskets, pressure nuts), have been carefully considered in the product design arkings Each enclosure carries its own part number and conformity markings. Interchangeability with other ILE series TH series housings can be coupled with metal hoods. Insulating hoods can be coupled with V-Type metal housings. Hoods 57.27, and can be mounted on O TQ and O frames simply by replacing the supplied levers with O L levers (to be purchased separately). Insulating enclosures are ideal for mounting of all ILE inserts with the exception of series models T 40/ 64 and TS 40/ 64 connector. Inserts with 45 terminals of the TE series (screw-type terminals) and TSE (spring terminals) are only insertable from the front (therefore not from the back) of the bulkhead mounting housings. eing made by insulating material, they do not require a special reinforced insulation as metal ones do, for use with series E higher voltage connector inserts (screw-type terminals). With the exception of the limitations described below, it is generally possible to mount the IO series modular connectors and frames with the ground and screen anchors dedicated to this series. Limitations With respect to enclosures in metal alloy, ILE insulating enclosures have some limitations of use in combination with particular accessories: RZ 06/ 10/ 16/ 24 reduction plates cannot be mounted with THI bulkhead mounting housings due to increased dimensions of the fastening flange of these insulating enclosures. The YG 16 in-line joint cannot be mounted on the THI 16 bulkhead mounting housings because the gaskets of the latter do not fit together with the joint profile. The YR 16.3 and YR 24.4 round cable feed-throughs are difficult to position on their respective THI 16 and THI 24 bulkhead mounting housings. PT 24 disposable protection cover cannot be mounted on insulating enclosures due to increased outer dimensions of these enclosures. IO series insert anchors cannot be mounted on TO 06/ 10 enclosures. IO series insert anchors cannot be mounted on TO 06/ 10 enclosures. When using both cable entries of surface mounting housings, the conduit shall be of insulating type. 280

32 resistance to chemical agents 1 mmonium acetate Wine vinegar cetone Fatty cids oric acid oric acid, 10% aqueous solution itric acid Hydrochloric acid <2% aqueous solution Lactic acid oncentrated hydrochloric acid Oleic acid Oxalic acid Sulfuric acid, 2% aqueous solution Stearic acid Succinic acid Tartaric acid Water oric water Sea water qua regia White alcohol (ethanol + isopropanol) myl alcohol 100% non-denatured ethyl alcohol Isopropyl alcohol 50% diluted methyl alcohol lum queous starch Gaseous ammonia Liquid ammonia mmonia, 10% aqueous solution niline oth killer sphalt enzene Petrol Petroleum ether Sodium bicarbonate (oxide) eer Sodium bisulfite, aqueous solution orax Gaseous butane Liquid butane mmonium carbonate Potassium carbonate Sodium carbonate (soda) Tar Potassium cyanide, aqueous solution yclohexane Potassium chlorate Sodium chlorate hlorine mmonium chloride hloride of lime diluted suspension alcium chloride alcium chloride, 10% aqueous solution Ferric chloride, 10% aqueous solution Potassium chloride Sodium chloride (salt) resol ecahydronaphthalene Potassium dichromate iethylphthalate iisononphthalate Sulphur dioxide iotilphthalate Heptane Hexane Turpentine Ethanol Light petroleum iluted phenol Formalin mmonium phosphate Sodium phosphate iesel Gypsum (see calcium sulfate) Glycerine iluted glycerine Ethylene or propylene glycol iluted glycol iluted glucose Hydrogen sulphide Sodium hydroxide (caustic soda) 12.5% sodium hydroxide (lye) Ink Potassium iodide Sodium hypochlorite (bleach) ercury ethanol Naphthalene N-utanol mmonium nitrate alcium nitrate Potassium nitrate Sodium nitrate Sodium nitrite Fuel oils ineral oils (tasteless) otor Oils ineral oil rilling oil utting oil Linseed oil Paraffin oil Silicone oil IR 901 oil, 20 IR 902 oil, 20 IR 903 oil, 20 Lubricating oil Transformer oil Vegetable oil Octane (see also iso-octane) Ozone Sodium perborate Potassium persulphate Petroleum austic potash (potassium hydroxide) 10% Propane ommon salt, aqueous solution Tallow Sodium silicate mmonium sulphate alcium sulphate Potassium sulphate opper sulphate, 10% aqueous solution Sodium sulphate Sodium sulphide resolic solution Solution for photo development Soap solution Fruit juices Sodium thiosulphate (fixing salt) Toluene Trichloroethylene Tricresyl phosphate iluted urea Urine ylene Sulphur T-TYPE - overview = resistant = limited resistance = not resistant 1 The classification herewith provided is only a generic reference guide in order to enable a first selection. It is based on literature data provided by the suppliers of the raw materials used, which are related to tests made on specimens under test conditions which are not always homogeneous and involving accelerating techniques, therefore not necessarily describing real operational conditions. The actual behaviour of products in the field may therefore be positively or negatively influenced by several variable environmental parameters like temperature, relative humidity, presence at the same time of a plurality of substances and their concentration, exposure time, dynamic or static application condition, and so on. The accuracy of transferring the indications given herein to the actual conditions of use is therefore merely indicative and does not imply any guarantee or responsibility by ILE. 281

33 T - T enclosures size insulating version poles + m 59 QE poles + m 80 SH... 6 poles + m 88 E... 6 poles + m 94 NE, SE, JNE, JSE 6 poles + m 95 and 106 SS... 6 poles + m 118 T, TE, TSE *)... 6 poles + m126 and 130 IO... 2 modules insert centre distance: 44 x 27 mm housings with single lever hoods with 2 pegs description part no. entry part no. entry bulkhead mounting housing with thermoplastic lever THI 06 L T-TYPE - size surface mounting housing with thermoplastic lever TP 06 L25 25 surface mounting housing with thermoplastic lever TP 06 L32 32 hood with pegs, side entry TO 06 L25 25 hood with pegs, side entry TO 06 L32 32 hood with pegs, top entry TV 06 L25 25 hood with pegs, top entry TV 06 L32 32 cover with pegs TH 06 L panel cut-out for bulkhead mounting housing in mm ø 4,5 THI 06 L TO 06 L25 and TO 06 L , TP 06 L25 and TP 06 L32 75 TV 06 L25 and TV 06 L32 ( ) 73 Ø 5, *) only for standard insulating version THI ,5 ( ) The surface mounting, high construction housings are supplied with an open threaded entry ( ) and diametrically opposite a closed threaded entry which can be opened by the user if required (with suitable tool) TH 06 L 17, Type 12 IP65 - ambient temperature limits -40 /

34 T - T enclosures size insulating version poles + m 61 QE poles + m 81 SH poles + m 89 E poles + m 96 NE, SE, JNE, JSE 10 poles + m 97 and 107 SS poles + m 119 T, TE, TSE *) poles + m127 and 131 SE (aux) poles + m 135 E (aux) poles + m 134 E (aux) poles + m /24 poles + m 151 IO... 3 modules insert centre distance: 57 x 27 mm housings with double lever hoods with 4 pegs description part no. entry part no. entry bulkhead mounting housing with thermoplastic lever THI 10 surface mounting housing with thermoplastic lever TP surface mounting housing with thermoplastic lever TP hood with pegs, side entry TO hood with pegs, side entry TO hood with pegs, top entry TV hood with pegs, top entry TV cover with pegs TH 10 panel cut-out for bulkhead mounting housing in mm ø 4,5 THI 10 TO and TO T-TYPE - size , TP and TP TV and TV Ø 5, *) only for enclosure THI The surface mounting, high construction housings are supplied with an open threaded entry and diametrically opposite a closed threaded entry which can be opened by the user if required (with suitable tool). TH 10 17, Type 12 IP65 - ambient temperature limits -40 /

35 T - T enclosures size insulating version poles + m poles + m 62 QE poles + m 82 SH poles + m 90 E poles + m 98 NE, SE, JNE, JSE 16 poles + m 99 and 108 SS poles + m 120 T, TE, TSE *) poles + m128 and 132 SE (aux) poles + m 137 E (aux) poles + m 136 E (aux) poles + m 137 P... 6 poles + m /36 and 12/2 poles + m /0 and 4/2 poles + m 154 IO... 4 modules insert centre distance: 77.5 x 27 mm housings with double lever hoods with 4 pegs description part no. entry part no. entry bulkhead mounting housing with thermoplastic lever THI 16 T-TYPE - size surface mounting housing with thermoplastic lever TP surface mounting housing with thermoplastic lever TP hood with pegs, side entry TO hood with pegs, side entry TO hood with pegs, top entry TV hood with pegs, top entry TV cover with pegs TH 16 panel cut-out for bulkhead mounting housing in mm ø 4,5 THI 16 TO and TO , , ,5 TP and TP TV and TV , Ø 5, ,5 *) only for enclosure THI The surface mounting, high construction housings are supplied with an open threaded entry and diametrically opposite a closed threaded entry which can be opened by the user if required (with suitable tool). TH 16 17,5 96,5 46 Type 12 IP65 - ambient temperature limits -40 /

36 T - T enclosures size insulating version poles + m poles + m 64 QE poles + m 83 SH poles + m 91 E poles + m 100 NE, SE, JNE, JSE 24 poles + m101 and 109 SS poles + m 121 T, TE, TSE *) poles + m129 and 133 SE (aux) poles + m 139 E (aux) poles + m 138 E (aux) poles + m 139 E (aux) poles + m 145 E (aux) poles + m /8 poles + m 155 IO... 6 modules insert centre distance: 104 x 27 mm housings with double lever hoods with 4 pegs description part no. entry part no. entry bulkhead mounting housing with thermoplastic lever THI 24 surface mounting housing with thermoplastic lever TP surface mounting housing with thermoplastic lever TP hood with pegs, side entry TO hood with pegs, side entry TO hood with pegs, top entry TV hood with pegs, top entry TV cover with pegs TH 24 panel cut-out for bulkhead mounting housing in mm ø 4,5 THI 24 TO and TO T-TYPE - size , TP and TP TV and TV Ø 5, *) only for enclosure THI The surface mounting, high construction housings are supplied with an open threaded entry and diametrically opposite a closed threaded entry which can be opened by the user if required (with suitable tool). TH 24 17, Type 12 IP65 - ambient temperature limits -40 /