A B O U T FA A C C A N A D A

Transcription

1 CANADA

2 ABOUT FAAC CANADA FAAC Canada is the exclusive distributor of FAAC products for the Canadian market. For more than 20 years FAAC has been supplying Canada with a variety of products: gate operators, barrier gates, automatic doors, parking equipment, security products, access control, radio controls and automatic bollards. Our goal is to ensure that the products we offer meet the needs of the Canadian market. To achieve this goal we test products in house and with selected dealers in the field. This way we can ensure that the products will meet the demands of our market and the challenges of the Canadian environment before we offer them to local markets. To properly assist our customers we provide training and technical support in Canada. With proper training on the full range of products and accessories FAAC customers can be assured that any project will be properly equipped.

3 Contents AUTOMATED SYSTEMS FOR SWING GATES External motor 391 Electro-mechanical 24Vdc operator with articulated arm for residential gates page 2 S418 Electro-mechanical 24Vdc operator for residential gates page Electro-mechanical 24Vdc operator for residential gates page Electro-mechanical operator for residential gates page Hydraulic operator for residential gates page 10 S450H Hybrid 24Vdc operator for residential and commercial gates page Hydraulic operator for commercial and industrial gates page 14 Underground motor 770 Underground electro-mechanical 24Vdc operator for residential gates page Underground hydraulic operator for residential and commercial gates page 18 S800H Underground hybrid 24Vdc operator for residential and commercial gates page 20 Accessories for swing gates page 22 Hardware for swing gates page 23 AUTOMATED SYSTEMS FOR SLIDE GATES 740 / 741 Gearmotor for residential gates page Gearmotor for commercial and industrial gates page 28 C850 Variable speed gearmotor for commercial and industrial gates page Gearmotor for industrial gates page 32 Hardware for sliding gates page 34 Hardware for cantilever sliding gates page 35 Hardware for hanging sliding doors and gates page 36 AUTOMATIC BARRIERS 620 Beams up to 5m page Beams up to 7m page 40 B680 Beams up to 8m, hybrid 36Vdc motor page 42 TRAFFIC BOLLARDS J200 Traffic bollard: Automatic for residential page 46 J275 Traffic bollard: Automatic page 47 J275F Traffic bollard: Fixed page 48 J275SA Traffic bollard: Semi-Automatic page 49 J355 Traffic bollard: M30 Crash Rating page 50 All information in this price book is subject to change without notice. For exact information on equipment, accessories and options please refer to the manuals provided by the manufacturers. V0417

4 AUTOMATIC DOORS A140 TK50 Automated system for sliding doors page N Automated system for swing doors page 54 Accessories for pedestrian doors page 56 TURNSTILES MPP 222 Half height turnstiles page 58 MPT 33 Full height turnstiles page 59 ACCESSORIES Access page 62 Communication page 63 Miscellaneous page 64 Radio page 65 Safety page 66 Boards page 67 All information in this price book is subject to change without notice. For exact information on equipment, accessories and options please refer to the manuals provided by the manufacturers. V0417

5 Automated systems for swing gates 391 Electro-mechanical 24Vdc operator S418 Electro-mechanical 24Vdc operator 413 Electro-mechanical 24Vdc operator 412 Electro-mechanical operator 402 Hydraulic operator S450H Hybrid hydraulic operator 400 Hydraulic operator 770 Underground electro-mechanical operator 750 Underground hydraulic operator S800H Underground hybrid hydraulic operator

6 391 Electro-mechanical operator with articulated arm for residential swing-leaf gates with single-leaf max width of 2m (2.5m with the electric lock) Compact design. Versatile, simple installation. The articulated arm allows high flexibility for the installation dimensions, enabling use on large pillars. With the non-reversing operator, there is no need to install electro-mechanical locking devices. In case of a power failure, rotating the (key protected) release device makes it possible to move the gate manually. Up to 2m anti break-in non reversing capability. Built-in mechanical stops: no need to install opening and closing mechanical stops. New control unit with anti-crushing device and virtual encoder with reverse function upon detection of obstacle. Emergency battery to ensure operation in case of power failure (optional). IMPORTANT: to ensure correct operation, make sure that the distance between the gate hinge and any walls or lateral fencing is greater than 725mm. DIMENSIONS AND TECHNICAL SPECIFICATIONS OF 391 Power supply 115 Vac Electric motor 24 Vdc Absorbed power 120 W Max. torque 250 Nm Max. angular speed 13 sec Max. leaf length * 2.5 m Use frequency at 20 C 1:25 Consecutive cycles at 20 C 80 cycles/day Protection class IP 44 Operating ambient temperature -20 C to +55 C Weight 8.7 kg Dimensions (L x D x H) in mm 185 x 260 x 310 *For leaves with a length exceeding 2m an electric lock must be fitted. 2 V0417

7 391 OPERATOR OPERATOR AND AND ACCESSORIES ACCESSORIES Control unit E124 Item code E124 power supply board Item code E124 board kit ESA approved PVC enclosure 14" x 12" x 6" NEMA 4 Item code MOD 391 Operator slave Item code Automated systems for swing gates 433Mhz quad button transmitter 433Mhz plug-in receiver XP20B bus photocell pair E124 battery support kit Item code Item code Item code Item code *Batteries are not included - 2 x 12VDC minimum 4 AH is recommended. Typical kit includes: Two (2) electro-mechanical operators 24V, one (1) E124 board kit ESA approved with PVC enclosure, one (1) BUS photocell pair, one (1) plug-in receiver and one (1) transmitter quad button. OTHER ACCESSORIES Gate hardware page 23/34 Access page 62 Communication page 63 Miscellaneous page 64 Radio page 65 Safety page 66 V0417 3

8 S418 Electro-mechanical operator for residential swing-leaf gates with single-leaf max width of 2.3m (2.7m with the electric lock) Opening and closing mechanical stops. Effective stroke 350mm. New multi-position fixing bracket for non-welded installation. New control unit with anti-crushing device and virtual encoder with reverse function upon detection of obstacle. DIMENSIONS AND TECHNICAL SPECIFICATIONS OF S418 Power supply 115Vac Electric motor 24Vdc Power 35 W Current 1.5A Max. thrust** Rod stroke Rod extension speed Leaf max. width Operating ambient temperature Weight 180 dan 350mm (390 mm w/o mechanical stops) 1.8cm/s 2.7m* -20 C to +55 C 6kg Dimensions (L x D x H) in mm 825 x 104 x 125 Protection class IP 54 Travel limit microswitches Opening & closing mechanical stops NO YES *use of the electric lock is required over 2.3m to guarantee the automatic lock. **with E124 board 4 V0417

9 S418 OPERATOR AND ACCESSORIES 391 OPERATOR AND ACCESSORIES Control unit E124 Item code E124 power supply board Item code E124 board kit ESA approved PVC enclosure 14" x 12" x 6" NEMA 4 Item code MOD S418 Operator 24Vdc Item code Automated systems for swing gates 433Mhz quad button transmitter 433Mhz plug-in receiver XP20B bus photocell pair E124 battery support kit Item code Item code Item code Item code *Batteries are not included - 2 x 12VDC minimum 4 AH is recommended. Typical kit includes: Two (2) electro-mechanical operators 24V, one (1) E124 board kit ESA approved with PVC enclosure, one (1) BUS photocell pair, one (1) plug-in receiver and one (1) transmitter quad button. OTHER ACCESSORIES Gate hardware page 23/34 Access page 62 Communication page 63 Miscellaneous page 64 Radio page 65 Safety page 66 V0417 5

10 413 Electro-mechanical operator for residential swing-leaf gates with single-leaf max width of 1.8m (2.5m with the electric lock) Off axis thrust operator. Integrated opening and closing mechanical stops (the travel limit mechanical stops need not be installed). Horizontal exit for cables to allow near to ground installation (low installation). New control unit with anti-crushing device and virtual encoder with reverse function upon detection of obstacle. Emergency battery to ensure operation in case of power failure (optional). Manual release device with simplified key-protected activation. DIMENSIONS AND TECHNICAL SPECIFICATIONS OF 413 Power supply 115Vac Electric motor 24Vdc Power 70 W Current 3A Protection class IP 44 Weight 6.5kg Thrust 250daN Rod stroke 300mm Rod extension speed 1.6cm/sec Leaf max. width* 2.5m Type and frequency of use at 20 C Continuous use Indicative min. hourly cycles at 20 C ~100 Operating ambient temperature -20 C to +55 C Dimensions (L x D x H) in mm 785 x 105 x 148 Travel limit microswitches NO Opening & closing mechanical stops YES *use of the electric lock is recommended over 1.8m 6 V0417

11 413 OPERATOR AND ACCESSORIES 391 OPERATOR AND ACCESSORIES Control unit E124 Item code E124 power supply board Item code E124 board kit ESA approved PVC enclosure 14" x 12" x 6" NEMA 4 Item code MOD 413 Operator 24Vdc Item code Automated systems for swing gates 433Mhz quad button transmitter 433Mhz plug-in receiver XP20B bus photocell pair E124 battery support kit Item code Item code Item code Item code *Batteries are not included - 2 x 12VDC minimum 4 AH is recommended. Typical kit includes: Two (2) electro-mechanical operators 24V, one (1) E124 board kit ESA approved with PVC enclosure, one (1) BUS photocell pair, one (1) plug-in receiver and one (1) transmitter quad button. OTHER ACCESSORIES Gate hardware page 23/34 Access page 62 Communication page 63 Miscellaneous page 64 Radio page 65 Safety page 66 V0417 7

12 412 Electro-mechanical operator for residential swing-leaf gates with single-leaf max width of 1.8m Non reversing operator, does not require electric lock. Applications with lower maneuvering intensity. Simplified installation and maintenance. DIMENSIONS AND TECHNICAL SPECIFICATIONS OF 412 Power supply voltage 115 Vac (+6%-10%) 50 (60) Hz Absorbed power 280 W Absorbed current 1.5A Motor rotation speed 1400 r.p.m. Rod extension speed 1.5cm/s Traction and thrust force 0 to 320 dan Thermal protection on motor winding 140 C Operating ambient temperature -20 C to +55 C Protection class IP 44 Weight 6.5kg Dimensions (L x D x H) in mm 1000 x 90 x V0416

13 412 OPERATOR AND ACCESSORIES 391 OPERATOR AND ACCESSORIES Control unit 455D Item code SX/LH with capacitor Item code DX/RH with capacitor Item code Automated systems for swing gates 433Mhz quad button transmitter 433Mhz plug-in receiver XP20 adjustable photocell pair Enclosure type L for control board Item code Item code Item code Item code D board kit ESA approved PVC enclosure 14" x 12" x 6" NEMA 4 Item code MOD Typical kit includes: Two (2) electro-mechanical operators 115V, one (1) 455D control board, one (1) enclosure type L, one (1) XP20 adjustable photocell pair, one (1) plug-in receiver and (1) transmitter quad button. OTHER ACCESSORIES Gate hardware page 23/34 Access page 62 Communication page 63 Miscellaneous page 64 Radio page 65 Safety page 66 V0417 9

14 402 Hydraulic operator for residential and commercial swing-leaf gates with single-leaf max width of 2m width of 2m (3m with electric lock) Highly compact, ideal for installation where space is limited. Encoder technology with the use of E145 board. Hydraulic locks in close position only. Anti-corrosion cover with high weather resistance. DIMENSIONS AND TECHNICAL SPECIFICATIONS OF 402 Power supply voltage 115 Vac (+6%-10%) 50 (60) Hz Absorbed power 220 W Absorbed current 2.0A Motor rotation speed 1400 r.p.m. Rod extension speed 1.3cm/s Pump flow rate 1 l/min Traction and thrust force 0 to 500 dan Operating ambient temperature -36 C to +55 C Thermal protection on motor winding 120 C Weight 6.5kg Type of oil FAAC HP2 Oil Protection class IP 55 Dimensions (L x D x H) in mm 959 x 85 x V0417

15 402 OPERATOR AND ACCESSORIES 391 OPERATOR AND ACCESSORIES Control unit E145 Item code CBC operator 115V Item code E145 board kit ESA approved PVC enclosure 14 x 12 x 6 NEMA 4 Item code MOD Automated systems for swing gates 433Mhz quad button transmitter 433Mhz plug-in receiver XP20B bus photocell pair Item code Item code Item code Safecoder Capacitor 25mf (for 115V) Item code Item code Encoder advantage: Gain more control of the gate by using the FAAC absolute encoder which detects the gate movement at all times. Adjust the sensitivity of the obstacle detection to make the gate safer for pedestrian use. Set the deceleration and acceleration in order to reduce stress on the operator. Typical kit includes: Two (2) electro-hydraulic operators 115V, one (1) E145 board kit ESA approved with PVC enclosure, two (2) safecoders, two (2) capacitors, one (1) BUS photocell pair, one (1) plug-in receiver and (1) transmitter quad button. OTHER ACCESSORIES Gate hardware page 23/34 Access page 62 Communication page 63 Miscellaneous page 64 Radio page 65 Safety page 66 V

16 S450H Hydraulic operator for residential and commercial swing-leaf gates with single-leaf max width of 2m Hybrid technology. Integrated encoder with anti-crushing function and reverse upon detection of obstacle. Useful stroke 311mm. New multi-position fixing bracket for non-welded applications. Opening/closing mechanical stops supplied standard. DIMENSIONS AND TECHNICAL SPECIFICATIONS OF S450H Power supply 115 Vac Electric motor 24 Vdc Power 70 W Current 7A Weight 6.5kg Protection class IP 55 Rod stroke 311mm Max. rod extension speed (adjustable*) >2.5 cm/s Frequency of use Continuous use Operating ambient temperature -36 C to +55 C Dimensions (L x D x H) in mm 1113 x 85 x 119 Max. thrust* >500 dan *with E124 board. 12 V0417

17 S450H OPERATOR AND ACCESSORIES 391 OPERATOR AND ACCESSORIES Control unit E124 Item code E124 power supply board Item code E124 board kit ESA approved PVC enclosure 14 x 12 x 6 NEMA 4 Item code MOD S450H operator with encoder Item code Automated systems for swing gates 433Mhz quad button transmitter 433Mhz plug-in receiver XP20B bus photocell pair E124 battery support kit Item code Item code Item code Item code *Batteries are not included - 2 x 12VDC minimum 4 AH is recommended. Typical kit includes: Two (2) electro-hydraulic operators 24V, one (1) E124 board kit ESA approved with PVC enclosure, one (1) BUS photocell pair, one (1) plug-in receiver and (1) transmitter quad button. OTHER ACCESSORIES Gate hardware page 23/34 Access page 62 Communication page 63 Miscellaneous page 64 Radio page 65 Safety page 66 V

18 400 Hydraulic operator for commercial and industrial swing-leaf gates Wide and versatile range for heavy industrial gates or gates with high use frequency. Hydraulic locks resistant to intrusion attempts. Maximum anti-crushing safety thanks to an exclusive hydraulic device. Key-protected release device. DIMENSIONS AND TECHNICAL SPECIFICATIONS OF CBAC 400 CBAC Long Power supply voltage 115 Vac (+6%-10%) 50 (60) Hz Absorbed power 220 W Absorbed current 2.2A Motor rotation speed 1400 r.p.m. Rod extension speed 1 cm/s 1.5 cm/s Pump flow rate 1 l/min 1.5 l/min Traction and thrust force 0 to 620 dan 0 to 465 dan Operating ambient temperature -36 C to +55 C Thermal protection on motor winding 120 C Weight 8.6kg 10kg Type of oil FAAC HP2 Oil Protection class IP 55 Dimensions (L x D x H) in mm 1031 x 113 x x 113 x V0417

19 400 OPERATOR AND ACCESSORIES 391 OPERATOR AND ACCESSORIES Control unit 455D Item code CBAC operator 115V Item code CBAC long operator 115V Item code Enclosure type L for control board Item code Automated systems for swing gates 433Mhz quad button transmitter Item code Mhz plug-in receiver Item code XP20 adjustable photocell pair Item code Internal stop for opening & closing of 400 operator Item code D board kit ESA approved PVC enclosure 14" x 12" x 6" NEMA 4 Item code MOD Capacitor 25mf (for 115V) Item code Internal stop for opening & closing of 400 long operator Item code Typical kit includes: Two (2) electro-hydraulic operators 115V, two (2) capacitors, one (1) 455D control board, one (1) enclosure type L, one (1) XP20 adjustable photocell pair, two (2) internal stops, one (1) plug-in receiver and (1) transmitter quad button. OTHER ACCESSORIES Gate hardware page 23/34 Access page 62 Communication page 63 Miscellaneous page 64 Radio page 65 Safety page 66 V

20 770 Underground electro-mechanical operator for residential swing-leaf gates with single-leaf width of 3.5m and max wight of 500kg Access to the operator is possible without removing the leaf. New control unit with anti-crushing device and virtual encoder with reverse function upon detection of obstacle. Emergency battery to ensure operation in case of a power failure (optional). DIMENSIONS AND TECHNICAL SPECIFICATIONS OF 770 Power supply 115Vac Electric motor 24Vdc Absorbed power 70 W Reduction ratio 1:1418 Absorbed current 3A Max traction thrust force 300 Nm Angle speed 6 /sec Type and frequency of use at 20 C 100% Leaf max. opening angle 100 Leaf max. wifth 3.5m (110 ) Weight 12kg (14kg with carrier case) Protection class IP 67 Operator dimensions 360 x 150 x 140 Operating ambient temperature -20 C to +55 C Carrier case dimensions 430 x x V0417

21 770 OPERATOR AND ACCESSORIES 391 OPERATOR AND ACCESSORIES Control unit E124 Item code E124 power supply board Item code E124 board kit ESA approved PVC 770 operator 24Vdc enclosure 14" x 12" x 6" NEMA 4 Item code MOD Item code Carrier case with release system (patented) Item code Automated systems for swing gates 433Mhz quad button transmitter 433Mhz plug-in receiver XP20B bus photocell pair E124 battery support kit Item code Item code Item code Item code *Batteries are not included - 2 x 12VDC minimum 4 AH is recommended. Internal opening mechanical stop Item code Internal closing mechanical stop Item code Typical kit includes: Two (2) electro-mechanical operators, two (2) carrier cases, two (2) internal opening stops, two (2) internal closing stops, one (1) E124 board kit ESA approved with PVC enclosure, one (1) BUS photocell pair, one (1) plug-in receiver and (1) transmitter quad button. OTHER ACCESSORIES Gate hardware page 23/34 Access page 62 Communication page 63 Miscellaneous page 64 Radio page 65 Safety page 66 V

22 750 Underground hydraulic operator for residential and commercial swing-leaf gates with single-leaf max weight of 800kg Quiet operator consisting of an underground unit and a control unit. The ideal solution for large antique doors or artistic significant. Maximum anti-crushing safety thanks to an exclusive hydraulic device. DIMENSIONS AND TECHNICAL SPECIFICATIONS OF 750 Power supply voltage 115 Vac (+6%-10%) 50 (60) Hz Absorbed power 220 W Absorbed current 1A Motor rotation speed 1400 r.p.m. Pump flow rate 0.75 l/min Operating ambient temperature -36 C to +55 C Protection class IP 55 Thermal protection on motor winding 120 C Weight 7.5kg Type of oil FAAC HP2 Oil Jack dimensions (L x D x H) in mm 410 x 160 x 205 Control unit dimensions (L x D x H) in mm 360 x 150 x 140 Operating ambient temperature x 353 x TECHNICAL SPECIFICATIONS OF HYDRAULIC JACK 100 opening 180 opening Rotation maximum angle Angle speed 7.8 /s Protection class IP 67 Effective torque 543Nm 18 V0417

23 750 OPERATOR AND ACCESSORIES 391 OPERATOR AND ACCESSORIES Control unit 455D Item code operator 100 Item code operator 180 Item code pump unit 115V Item code Enclosure type L for control board and pump unit Item code Automated systems for swing gates 433Mhz quad button transmitter 433Mhz plug-in receiver XP20 adjustable photocell pair Hose fittings (pkg of 4) Item code Item code Item code Item code m Hose Item code Capacitor 25mf (for 115V) Item code D board kit ESA approved PVC enclosure 14" x 12" x 6" NEMA 4 Item code MOD Typical kit includes: Two (2) hydraulic operators (100 ), two (2) pump units 115V with type L enclosure, two (2) capacitors, one (1) 455D control board, one (1) enclosure type L for control board, (1) XP20 adjustable photocell pair, one (1) plug-in receiver, one (1) transmitter quad button, two (2) 10m hose with two (2) hose fitting packages. OTHER ACCESSORIES Gate hardware page 23/34 Access page 62 Communication page 63 Miscellaneous page 64 Radio page 65 Safety page 66 V

24 S800H Underground hydraulic operator for residential and commercial swing-leaf gates with single-leaf width of 2m and max weight of 800kg Continuous use frequency. Integrated magnetic encoder with BUS technology (non polarized two wire connection). Thanks to the integrated positive stops, there is no need to install opening and closing mechanical stops on the ground. Hybrid technology. Service release device. Easier handling and installation thanks to the integrated handles. DIMENSIONS AND TECHNICAL SPECIFICATIONS OF S800H Power supply Electric motor 115 Vac 24 Vdc Absorbed power 60 W* Max. torque Angle speed max Operating ambient temperature 500Nm (with E024S control board) 600Nm (with E124 control board) 5.5 /s (with E024S control board) 8.2 /s (with E124 control board) -36 C to +55 C Weight 13.2kg (100 ) 17.0kg (180 ) Type of oil FAAC HP2 Oil Max opening angle 113 Protection class IP 67 Type of slow down Leaf max width Frequency of use Hydraulic block *For each single operator. Electronic 2m Continuous use Installed 20 V0417

25 S800H OPERATOR AND ACCESSORIES 391 OPERATOR AND ACCESSORIES Control unit E124 Item code E124 power supply board Item code S800H operator 100 Item code S800H operator 180 Item code S800H casing Item code Grooved joint kit Item code Automated systems for swing gates E124 board kit ESA approved PVC enclosure 14 x 12 x 6 NEMA 4 Item code MOD XP20B bus photocell pair Item code Hydraulic release system Item code E124 battery support kit Item code *Batteries are not included - 2 x 12VDC minimum 4 AH is recommended. 433Mhz plug-in receiver 433Mhz quad button transmitter Item code Item code Typical kit includes: Two (2) electro-hydraulic operators 24V 100, two (2) casings, one(1) E124 board kit ESA approved with PVC enclosure, two (2) grooved joint kits, two (2) hydraulic releases, one (1) BUS photocell pair, one (1) plug-in receiver and (1) transmitter quad button. OTHER ACCESSORIES Gate hardware page 23/34 Access page 62 Communication page 63 Miscellaneous page 64 Radio page 65 Safety page 66 V

26 Accessories Swing Gates PART NO DESCRIPTION 400SPUG Upgrade model 400 operator to slow pump (per operator) Slow pumps provide more torque for larger openings or heavier leafs. Please call for more details FAAC electric strike 12Vdc/Vac c/w external cylinder (small) & coupling plate FAAC receiver slot with pilaster FAAC internal cylinder (large) for FAAC coupling plate for GL1200R BEA magnetic gate lock (front mount) with 1200lb holding force LZBRGATE1200 BEA maglock Z bracket for GL1200R TRX Plug-in transformer 115/24 Vac SDI-LM Latching module to control maglock (for 455D & E024S) LM Latching module for FAAC gates (addition to receiver ) 22 V0417

27 Hardware Swing Gates PART NO DESCRIPTION FACsrl top hinge c/w bracket 40mm FACsrl bottom hinge c/w bracket 40mm FACsrl top hinge c/w bracket 60mm FACsrl bottom hinge c/w bracket 60mm A FACsrl aluminum top hinge c/w bracket 40mm A FACsrl aluminum bottom hinge c/w bracket 40mm A FACsrl aluminum top hinge c/w bracket 60mm A FACsrl aluminum bottom hinge c/w bracket 60mm FACsrl top hinge 40mm FACsrl bottom hinge 40mm FACsrl top hinge 60mm FACsrl bottom hinge 60mm FACsrl top hinge 70mm FACsrl bottom hinge 70mm Hardware for swing gates V

28 Swing & Slide gates

29 Automated systems for sliding gates 740/741 Gearmotor for residential gates 844 Gearmotor for commercial and industrial gates C850 Variable speed gearmotor 884 Gearmotor for heavy duty industrial gates

30 Gearmotor for residential sliding gates with max weight of 500kg (740) and 900kg (741) Quick and easy installation thanks to the built-in, pre-wired control unit. Anti-crushing protection is ensured by an electronic device directly controlling drive torque. As the gearmotor is non reversing, no electric locks need to be installed. In the event of power failure, the rotation of the key protected release device makes it possible to open and close the gate manually. Simplified on display programming. Magnetic limit switch. DIMENSIONS AND TECHNICAL SPECIFICATIONS OF Power supply voltage 115 Vac 50 (60) Hz Absorbed power 350 W 500 W Absorbed current 1.5A 2.2A Traction and thrust force 45 dan 65 dan Motor rotation speed 1400 r.p.m Thermal protection on motor winding 140 C Reduction ratio 1:25 Leaf max. weight 500kg 900kg Sliding speed 12 r.p.m (Z16 pinion) Operating ambient temperature -20 C to +55 C Protection class IP 44 Dimensions (L x D x H) in mm 295 x 225 x 325 (pinion included) 26 V0417

31 OPERATOR AND ACCESSORIES Model Max Weight (kg) OPERATORS AND ACCESSORIES Use Use Frequency (%) F F Automated systems for sliding gates Built-in control board 740D Item code operator 115V Item code operator 115V Item code Galvanized rack 30 x 12 mod. 4 with weld-on fittings (per meter) Item code Nylon rack with fittings (Box of 4m) Item code Note: For proper operation cantilever track or ground level track is required. OTHER ACCESSORIES Gate hardware page 23/34 Access page 62 Communication page 63 Miscellaneous page 64 Radio page 65 Safety page 66 V

32 844 Gearmotor for sliding gates with max weight of 1,800kg Ideal for commercial and industrial applications. Anti-crushing safety. As the gearmotor is non reversing, no electric locks need to be installed. In the event of a power failure, the key-operated release device makes it possible to open and close the gate manually. Twin-disk clutch in oil-bath. Magnetic limit switch. DIMENSIONS AND TECHNICAL SPECIFICATIONS OF 844 Power supply voltage 115 Vac (+6% -10%) 50 (60) Hz Absorbed power 650 W Absorbed current 7A Traction and thrust force dan (Z16) Motor rotation speed 1400 r.p.m Reduction ratio 1:30 Operating ambient temperature -20 C to +55 C Weight with oil 14.5kg Protection class IP 44 Type of oil FAAC HP2 Oil Gate speed 9.5m/min (Z16) Thermal protection on motor winding 120 C Electric motor Single-phase, Bi-directional Limit switch Magnetic Clutch Twin-disk in oil bath Dimensions (L x D x H) in mm 275 x 191 x V0417

33 OPERATOR AND ACCESSORIES Model 844 OPERATORS AND ACCESSORIES Max Weight (kg) Use Use Frequency (%) F844-R-1 1, Automated systems for sliding gates Built-in control board 780D Item code operator 115V Item code Galvanized rack 30 x 12 mod. 4 with weld-on fittings (per meter) Item code Pinion Z16 for rack Item code Pinion Z20 for rack Item code Foundation plate with side and height adjustments Item code Note: For proper operation cantilever track or ground level track is required. OTHER ACCESSORIES Gate hardware page 23/34 Access page 62 Communication page 63 Miscellaneous page 64 Radio page 65 Safety page 66 V

34 C850 Variable speed gearmotor for sliding gates with max weight of 1,800kg Adjustable up to 28 /s and a maximum recommended length of 20m. Ideal for stores, warehouses, malls, prisons, embassies or any application in which fast operation and continuous duty (100%) is requested. Powerful gearmotor: 1.1KW irreversible gearmotor + electric brake. 1.5KW frequency inverter for easy programming of: - Running speed - Deceleration speed - Ramp-up time (acceleration) - Ramp-down time (deceleration) Integrated full feature control panel protected by a metal housing and plastic transparent cover. 4 integrated limit switches. In the event of power failure an easy manual release makes it possible to move the gate manually. DIMENSIONS AND TECHNICAL SPECIFICATIONS OF C850 Power supply voltage 230 Vac (+6% -10%) 50 Hz Absorbed power 1800 W Type of motor 1.1KW with oil lubrication Traction and thrust force dan (Z16) Pull and push 180 dan (Z28 module 4) Drive torque 110 Nm Operating ambient temperature -20 C to +55 C Gate speed / sec Protection class IP 54 Adjust speed and engine control By inverter Max. inverter 1.5KW R.o.T CD continuous service Motor weight 49kg Limit switch 4 built-in mechanical Dimensions (L x D x H) in mm 510 x 295 x V0417

35 C OPERATOR AND ACCESSORIES Model C850 OPERATORS AND ACCESSORIES Max Weight (kg) Use Use Frequency (%) FC850 1, The package includes: one (1) variable speed gearmotor with Z28 pinion and incorporated control board E850 ESA approved, frequency inverter, limit switches, and six (6) meters of galvanized rack with rack fittings. Automated systems for sliding gates Built-in control board E850 Item code C850 operator 230V with pinion Item code Remote keypad inverter (option) Item code Pinion Z28 for rack Item code Galvanized rack 30 x 12 mod. 4 with weld-on fittings (per meter) Item code Foundation plate C850 Item code Note: For proper operation cantilever track or ground level track is required. OTHER ACCESSORIES Gate hardware page 23/34 Access page 62 Communication page 63 Miscellaneous page 64 Radio page 65 Safety page 66 V

36 884 Gearmotor for sliding gates with max weight of 3,500kg Ideal for the heaviest industrial gates with intensive use. Braking device that guarantees reduced stop spaces and keeps the gate closed, thus making it unnecessary to install electric locks. In the event of power failure the key-protected lever-operated release device makes it possible to open and close the gate manually. Twin-disk clutch in oil bath. Base with leveling screws. Steel housing protected by cataphoresis treatment and polyester paint. DIMENSIONS AND TECHNICAL SPECIFICATIONS OF 884 Power supply voltage 230V 3PH (+6% -10%) 50 (60) Hz Absorbed power 850 W Absorbed current 1.6A (400V) Torque 0 to 155 Nm Motor rotation speed 1400 r.p.m Reduction ratio 1:43:2 Operating ambient temperature -20 C to +55 C Weight 50kg Protection class IP 55 Type of oil FAAC HP2 Oil Gate speed 10m/min (Z16) Limit switch With lever & roller microswitch Clutch Twin-disk in oil bath Dimensions (L x D x H) in mm 430 x 310 x V0417

37 OPERATOR AND ACCESSORIES Model 884 OPERATORS AND ACCESSORIES Max Weight (kg) Use Use Frequency (%) F884 3, % (up to 2,000kg) 50% (over 2,000kg) Automated systems for sliding gates Built-in control board 884T Item code operator 230V 3PH (pinion sold separately) Item code Pinion Z16 module 6 with protection for rack Item code Foundation plate for 884 Item code Large rack per meter for 884 Item code Package with corner fittings for securing the large rack (3pcs) Item code Note: For proper operation cantilever track or ground level track is required. OTHER ACCESSORIES Gate hardware page 23/34 Access page 62 Communication page 63 Miscellaneous page 64 Radio page 65 Safety page 66 V

38 Hardware Sliding Gate PART NO DESCRIPTION 307 FACsrl V groove roller Dia. = 120mm, H = 22mm, Max weight = 200kg 407 FACsrl V groove roller dual bearing Dia. = 120mm, H = 30mm, Max weight = 400kg 101 FACsrl V groove roller c/w bracket Dia. = 75mm, H = 25mm, Max weight = 200kg 127 FACsrl V groove roller c/w bracket Dia. = 100mm, H = 25mm, Max weight = 400kg 301 FACsrl V groove roller Dia. = 60mm, H = 16mm, Max weight = 100kg 701/Z3F FACsrl V groove floor rail 3m section H = 16mm galvanized & pre-drilled 405/20 FACsrl half round roller Dia. = 100mm, H = 24mm, Max weight = 200kg 405/20.2 FACsrl half round roller dual bearing Dia. = 100mm, H = 30mm, Max weight = 400kg 101/20 FACsrl half round roller c/w bracket Dia. = 75mm, H = 25mm, Max weight = 200kg 127/20 FACsrl half round roller c/w bracket Dia. = 100mm, H = 25mm, Max bracket = 400kg 720/Z3F FACsrl half round floor rail 3m section H = 16mm galvanized & pre-drilled 118 FACsrl nylon roller Dia. = 40mm, H = 60mm FACsrl nylon roller c/w inox bearings Dia. = 52mm, H = 48mm 159C FACsrl galvanized roller c/w bearing Dia. = 35mm, H = 78mm 160C FACsrl galvanized roller c/w bearing Dia. = 42mm, H = 28mm 161C FACsrl galvanized roller c/w bearing Dia. = 52mm, H = 28mm 116GP Limit stop with fixing plate Base = 130mm x 130mm 34 V0417

39 Cantilever Sliding Gate PART NO DESCRIPTION 910S FACsrl 900 support roller 1010 FACsrl 1000 support roller 2010 FACsrl 2000 support roller 3010L FACsrl 3000 support roller light 3010 FACsrl 3000 support roller Two support rollers are required per gate. 222 FACsrl adjustable guide small profile 218 FACsrl adjustable guide large profile 224L FACsrl adjustable guide open profile 2050 FACsrl mounting plate for 1010 or FACsrl mounting plate for L FACsrl mounting plate for 3010L Two mounting plates are recommended per gate. Hardware for sliding gates FAC-900A FAC-1000A FAC-2000A FAC-3000A 900T3 900T6 1000T3 1000T6 2000T3 2000T6 3000T6 FACsrl 900 series accessory kit FACsrl 1000 series accessory kit FACsrl 2000 series accessory kit FACsrl 3000 series accessory kit Each accessory kit includes: (8) fixing bolts, (1) guide roller, (1) guide stop & (1) end stop. With the exception of FAC-3000A where the guide stop is replaced with another guide roller and there are (12) fixing bolts. FACsrl 900 track 3m section galvanized (5.51 kg/m) FACsrl 900 track 6m section galvanized (5.51 kg/m) FACsrl 1000 track 3m section galvanized (7.22 kg/m) FACsrl 1000 track 6m section galvanized (7.22 kg/m) FACsrl 2000 track 3m section galvanized (16 kg/m) FACsrl 2000 track 6m section galvanized (16 kg/m) FACsrl 3000 track 6m section galvanized (26.6 kg/m) FPMK FACsrl post mounting kit 1000/2000 FFPMK FACsrl & FAAC 844 post mounting kit 1000/2000 Note: FPMK & FFPMK drastically affect the capabilities of the FACsrl 1000/2000 rollers. Please contact us for details. Note: For specific cantilever slide gate calculations please contact us. V

40 Hanging Sliding Doors and Gates PART NO DESCRIPTION SMALL HARDWARE 4RC/45 FACsrl track roller Capacity: 300kg per pair ST45 FACsrl track roller bracket 45.3 FACsrl track 3m section 45.6 FACsrl track 6m section SP45 SS45 FACsrl track wall bracket Maximum distance between brackets = 600mm FACsrl track ceiling bracket Maximum distance between brackets = 600mm LARGE HARDWARE 4RC/55 FACsrl track roller large Capacity: 600kg per pair ST55 FACsrl track roller bracket large 55.3 FACsrl track 3m section large 55.6 FACsrl track 6m section large SP55 SS45 FACsrl track wall bracket Maximum distance between brackets = 700mm FACsrl track ceiling bracket Maximum distance between brackets = 700mm 36 V0417

41 Automated barriers 620 Barrier gate for beams up to 5m 640 Barrier gate for beams up to 7m B680 Hybrid barrier for beams up to 8m

42 620 Standard Automatic barrier for beams up to 5m Hydraulic operator with opening and closing locks. The ideal solution for heavy traffic. Electronic deceleration, patented. The barrier status can be signaled to the traffic control devices. Automatic, semi-automatic, parking, condo and custom logics. External release with triangular key. Built-in loop detector, two independent channels. DIMENSIONS AND TECHNICAL SPECIFICATIONS OF 620 STANDARD Power supply voltage Electric motor Absorbed power 115Vac (+6% - 10%) 50 (60) Hz Single-phase, Bi-directional 220 W Absorbed current 2.2A Motor rotation speed Pump flow rate 1400 r.p.m 0.75/1 l/min Thermal protection on motor winding 120 C Effective torque Electronic deceleration Operating ambient temperature Weight Type of oil Barrier body treatment Paint 0 to 200 / 0to 150Nm Adjustable with cams -36 C to +55 C 73kg FAAC HP2 Oil Cataphoresis Orange (RAL 2004) or White Protection class IP 44 Type of beam Rectangular standard, rectangular standard c/w skirt, articulated standard, round Dimensions (L x D x H) in mm 350 x 170 x 1080 Thrust capacitor 30μF 38 V0417

43 620 STANDARD KITS 391 OPERATOR AND ACCESSORIES Model Beam max length (m) Note: Barrier gates are available in orange or white. Please specify when placing an order. The package includes: one (1) barrier body, hydraulic drive transmission system complete with balancing spring, installation accessories, one (1) triangular release key, one (1) beam as per length, one (1) beam hardware assembly, one (1) incorporated 624BLD controller with on board dual channel loop detector. 620 CONTROL UNIT AND ACCESSORIES Use Opening time (s) Use Frequency (%) F620-S3M F620-S4M F620-S5M Automatic barriers Built-in control board 624BLD Item code Rectangular beams - 3 lengths Length 2,815mm Item code Length 3,815mm Item code Beam hardware for F620-S Item code Articulation kit - max. ceiling height 3m (standard rectangular beams up to 4m) Item code Length 4,815mm Item code Round beams - 2 lengths Length 3,300mm Item code Beam hardware for round beams Item code Foundation plate Item code Red LED light for beam c/w wire harness Item code Length 4,300mm Item code OTHER ACCESSORIES Gate hardware page 23/34 Access page 62 Communication page 63 Miscellaneous page 64 Radio page 65 Safety page 66 V

44 640 Automatic barrier for beams up to 7m Hydraulic operator with opening and closing locks. External release with triangular key. The right solution for large industrial applications with demanding use. Electronic deceleration, patented. The barrier status can be signaled to the traffic control devices. Built-in loop detector, two independent channels. DIMENSIONS AND TECHNICAL SPECIFICATIONS OF 640 Power supply voltage Electric motor Absorbed power 115Vac (+6% - 10%) 50 (60) Hz Single-phase, Bi-directional 115 W Absorbed current 2.2A Motor rotation speed Pump flow rate r.p.m 0.75 l/min Thermal protection on motor winding 120 C Effective torque Electronic deceleration Operating ambient temperature Weight Type of oil Barrier body treatment Paint 0 to 470 / 0 to 250 / 0 to 210 Nm Adjustable with cams -36 C to +55 C 84kg FAAC HP2 Oil Cataphoresis Orange (RAL 2004) or White Protection class IP 44 Type of beam Rectangular Rectangular c/w skirt Dimensions (L x D x H) in mm 380 x 200 x 1080 Thrust capacitor 30μF 40 V0417

45 640 KIT 391 OPERATOR AND ACCESSORIES Model Beam max length (m) Note: Barrier gates are available in orange or white. Please specify when placing an order. The package includes: one (1) barrier body, hydraulic drive transmission system complete with balancing spring, installation accessories, one (1) triangular release key, one (1) 7m beam, one (1) beam hardware assembly, one (1) incorporated 624BLD controller with on board dual channel loop detector. Use Opening time (s) Use Frequency (%) F Continuous duty 640 CONTROL UNIT AND ACCESSORIES Automatic barriers Built-in control board 624BLD Item code Rectangular beams for F640-1 Length 7m Item code Beam hardware for F640-1 Item code Support fork for beams over 5m Item code End foot for beams over 5m Item code Red LED light for beam c/w wire harness Item code Foundation plate Item code OTHER ACCESSORIES Gate hardware page 23/34 Access page 62 Communication page 63 Miscellaneous page 64 Radio page 65 Safety page 66 V

46 B680H Hybrid automatic barrier 36Vdc for beams up to 8m Hybrid technology: Hydraulic + Brush-less motor. Barrier with unlimited springs: over 2,000,000 continuous cycles. Only one barrier model and two springs for beams from 2m to 8m. Removable housing available in 4 colours or stainless steel. Fast opening speed (from 1.5 sec. for 2m to 6 sec. for 8m). Easy to program and advanced control unit with: integrated encoder (with reverse in the event of obstacle), integrated dual channel loop detector and Master/Slave logic. Optional flashing LED cabinet lights and LED lights for beam. DIMENSIONS AND TECHNICAL SPECIFICATIONS OF B680H Power supply voltage 100 to 240Vac 50 (60) Hz Electric motor Brushless 36Vdc Absorbed power 240 W Absorbed current 1.1A (at 230V) Motor rotation speed 1000 to 6000 r.p.m Pump flow rate 3.2 l/min Electronic deceleration Absolute encoder Operating ambient temperature -36 C to +55 C Weight 85kg Type of oil FAAC HP2 Oil Barrier body treatment zinc-plating anti-corrosion + paint Cabinet colour White, Blue, Red, Gray Protection class IP 44 Type of beam Round with optional lights Dimensions (L x D x H) in mm 469 x 279 x V0417

47 B680H KITS 391 OPERATOR AND ACCESSORIES Model Beam max length (m) Note: White and Red cabinets are stock. Please specify when placing an order. The package includes: one (1) barrier gate c/w incorporated control unit with dual channel loop detector and encoder, hydraulic transmission system, beam hardware, balancing spring, round beam and cabinet. B680H CONTROL UNIT AND ACCESSORIES Use Opening time (s) Use Frequency (%) FB680-3M FB680-4M FB680-5M FB680-6M FB680-7M FB680-8M Round beams for L pocket and spring Length Initial beam 4m Item code Round beams for S pocket and spring Length 3m Item code Automatic barriers Built-in control board E680 Item code Spring and pocket round beam S (small) Item code Length One-piece 5.3m Item code Length Final beam 3.3m Item code Length Final beam 4.3m Item code Length 4m Item code Beam connector Item code Spring and pocket round beam L (large) Item code End foot for S/L round beams Item code Support fork for S/L round beams Item code OTHER ACCESSORIES LED light cord 11m for round beam Item code Articulation kit for round beam (4m beam max. length) Item code Connector for round beam lights Item code Foundation plate Item code Flashing light for cabinet Item code Emergency battery kit Item code Battery connection kit Item code Gate hardware page 23/34 Access page 62 Communication page 63 Miscellaneous page 64 Radio page 65 Safety page 66 V

48

49 Traffic bollards J SERIES automatic bollard: residential J SERIES automatic bollard J SERIES fixed bollard J SERIES semi-automatic bollard JSERIES M30 version bollard

50 J SERIES Automatic Residential traffic bollard J200 J200 automatic bollard is particularly suitable in residential applications in order to control vehicular traffic. The slim design is aesthetically pleasing while maintaining a secure residential area. It can be operated by means of commands performed by authorized personnel or by means of automatic commands. The pit and cylinder are all in one allowing for easy transportation and a simpler installation. J200/600HA - Cylinder 5mm thick treated by cataphoresis and painted - Powder painted metallic dark grey RAL Hydraulic lock in raised position (in the event of power failure) with special release key - Incorporated pit - Pit heater (for extending operating temperature to -25 C) - 10m of cable Electronic control unit for FJ200 (*) TECHNICAL SPECIFICATIONS OF FJ200 Drive Cylinder stroke Cylinder diameter Cylinder material standard version Standard cylinder surface treatment Hydraulic 600mm 200mm Steel Fe 360 (6mm thickness) Cataphoresis and polyester powder paint, dark grey metallised RAL7021 Cylinder material special stainless steel version Satin-finished ISI 316 (6mm thick) Cylinder top part (head) Aluminum RAL 9006 Rise time Descent time Hydraulic pump power supply Power consumption ~7 sec ~7 sec 230 Vac +6% - 10%, 50/60 Hz 230 W Protection class IP 56 Recommended use Standard refracting strip Manual lowering operation Total weight Operating temperature with heater Residential areas Height 25mm Possible with hydraulic circuit mechanical release 90kg -25 C / +55 C Dimensions (L x D x H) in mm 400 x 500 x 800 Connection cable Standard 16+1 conductors, minimum section 1.5mm Maximum length Item code FJ200 FJ-CU Optional buzzer for FJ Optional LED lights for FJ *one control unit FJ-CU can manage up to 3 FJ200 bollards. 50m 46 V0417

51 J SERIES Automatic Commercial traffic bollard Concealed traffic bollard J SERIES automatic is recommended in situations where numerous transits per day are required. It can be operated automatically with commands executed by authorized persons (cards, remote controls, etc.) or with commands automatically executed at a predetermined time (time programmer). J275/600HA Automatic - Steel cylinder 7mm thickness treated by cataphoresis and painted - Powder painting metallic dark grey RAL Outer ring with central LED light - Buzzer - Emergency release - 10m of cable - Bollard pit complete with counter-frame - Pit heater (for extending operating temperature to -25 C) Electronic control unit for FJ2.6 (*) Item code FJ2.6 FJ-CU Optional pit cover for FJ Traffic bollards *one control unit FJ-CU can manage up to 3 bollards FJ2.6. TECHNICAL SPECIFICATIONS OF FJ2.6 Drive Hydraulic Cylinder stroke 600mm Cylinder diameter 275mm Cylinder material standard version Steel Fe 360 (7mm thickness) Cylinder material special AISI 316 Release stainless steel Catephoresis and polyester powder painted Cylinder surface treatment Metallic dark grey RAL 7021 Head surface treatment Anticorodal case aluminum RAL 9006 Rising time ~5.0 sec Descent time (standard) ~2.8 sec Descent time (rapid) ~1.0 sec Power supply 230 Vac +6% - 10%, 50/60 Hz Power construction 220W Protection class IP 67 Work frequency Heavy duty Reflective strip Standard height 55mm Manual lowering operation Simple hydraulic release key Impact resistance 9,000 Joules Break in resistance 120,000 Joules Walled in pit with cylinder profile 560 x 560 x 950 mm Cable to link bollard to control unit FG7CR-0,6/1Kv-16G-1,5 Operating ambient temperature -25 C to +55 C Bollard weight 150kg V

52 J SERIES Fixed Fixed traffic bollard Fixed bollards are suitable in applications where the bollards do not need to be removed from the ground for any reason, however they keep the secure aesthetic of the site. The cost of the bollard is significantly less than the automatic version and the installation is easier and faster. J275/600 Fixed - Cylinder in Fe 510 steel 6mm thick - Powder painted metallic dark grey RAL 7021 Item code FF2.6 TECHNICAL SPECIFICATIONS OF FF2.6 Cylinder Cylinder diameter FE 540 steel - 6mm thick 275mm Cylinder surface treatment Polyester-powder painted metallic dark grey RAL 7021 Cylinder stroke Upper part of cylinder (head) 600mm Anticorodal case-hardened aluminum Surface treatment of head Polyester powder painted light grey RAL 9006 Protection class IP 67 Reflective strip Impact resistance Crash resistance Pit to be walked in for FK2.7 Standard height 55mm 16,000 Joules 630,000 Joules Pit for walling in, complete with lag bolts, facility for draining rainwater and entry point for service line - dimemsions 650 x 650 x 1200 mm 48 V0417

53 J SERIES Semi-automatic Concealed traffic bollard: gas powered piston This type of bollard is recommended in cases when access is limited or when used together with the automatic version. This bollard solves transit/stopping problems without requiring electricity. With its single-effect, gas-powered piston, rising is done automatically with the key and lowering is done by applying slight pressure with the foot to the head of the bollard. J275/600 SA semi-automatic - Cylinder in Fe 37 steel 6mm thick - Painted standard metallic dark grey RAL Bollard pit 275 H600 c/w counter-frame Item code FS2.6 Traffic bollards TECHNICAL SPECIFICATIONS OF FS2.6 Movement criterion Single-effect gas piston Cylinder FE 37 steel - 6mm thick Cylinder surface treatment Polyester powder painted metallic dark grey RAL 7021 Cylinder diameter 275mm Cylinder stroke 600mm Upper part of cylinder (head) Anticorodal case-hardened aluminum Surface treatment of head Polyester powder painted light grey RAL 9006 Refracting band Standard height 55mm Impact resistance 9,000 Joules (FE 37 steel - 6mm thick) Crash resistance 120,000 Joules (FE 37 steel - 6mm thick) Dimensions of pit to be walled in 560 x 560 x 1020 mm V

54 J SERIES M30 Version Concealed hydraulic traffic bollard: anti-terrorism Available only in the automatic version, this bollard has an extremely high crash resistance. It is specifically designed to meet the increasingly high requirements dictated by security problems. It can be used in applications to build protective barriers or to allow access to particularly sensitive zones such as: Embassies, Consulates, Public Offices, Banks, etc. Guaranteed for high use frequency. J355 M50 Automatic - Cylinder in steel S355 JREN mm thick - Painted standard metallic dark grey RAL Bollard pit complete with counter-frame and armouring lag bolts - Flashing lamps (9 lights) - Movement reporting buzzer - Pit heater - 10m of cable - Tested according to American Standards ASTMf M30 Electronic control unit for J355 Item code J355 FK-CU Optional pit cover for J TECHNICAL SPECIFICATIONS OF J355 Movement criterion Cylinder Cylinder diameter Hydraulic Steel S355 JREN mm Cylinder surface treatment Polyester-powder painted metallic dark grey RAL 7021 Cylinder stroke Upper part of cylinder (head) 1m Anticorodal case-hardened aluminum Surface treatment of head Polyester powder painted light grey RAL 9006 Protection class IP 67 Locking in raised position Emergency manual operation Travel limit position sensor Rise/descent time Length of standard cable included Reflective strip Impact resistance Crash resistance The raised position is guaranteed, even during a power failure by the hydraulic lock integrated in the control unit Standard - Manual release device in the event of fault or lack of accessible energy by dismantling the upper part of the baseplate (maximum anti-intrusion security) Two magnetic sensors in open and closed position ~6 sec 10m Standard height 55mm 150 kjoules 656 kjoules Counter-frame to be walled in Perlitic cast iron, polyester-powder painted, dark metallic grey RAL 7021 Pit to be walled in for J355 Pit for walling in, complete with lag bolts, facility for draining rainwater and entry point for service line - dimensions 570 x 690 x 1665 mm 50 V0417

55 Automatic doors A N TK50 Automated system for sliding doors Automated system for swing doors

56 A140 TK50 Automated systems for sliding doors The compact dimensions enable the FAAC TK50 A140 to adapt to any architectural need even when space is limited. For the best versatility, the drive adapts to single leaf sliding doors with maximum weight of 110kg or double-leaf sliding doors with maximum weight of 70kg per leaf. TECHNICAL SPECIFICATIONS OF TK50 A140 Power supply Absorbed power Drive unit Operating ambient temperature Protection class Frequency of use Anti-crushing device Partial opening adjustment Opening speed Closing speed Pause time Night pause time Photocells fail safe 115Vac 50/60 Hz 100 W 24Vdc with encoder -20 C to +55 C IP 23 (internal use only) Continuous duty Standard 10% to 90% of total opening 5 to 80 cm/sec. / 10 to 160 cm/sec. (adjustable) 5 to 70 cm/sec. / 10 to 140 cm/sec. (adjustable) 0 to 30 sec. (adjustable) 0 to 240 sec. (adjustable) Standard (can be excluded) 52 V0417

57 Single-leaf, double-leaf, continuous duty An automated system for sliding doors designed to meet the needs of the market as well as protect our environment. Motor with electrolock Slots for rapid mechanical assembly Optional knob for manual release Automatic doors Control unit Nylon sliding carriages V

58 950N Automated systems for swing doors For applications where a swing door is required to open automatically. FAAC electro-mechanical automated system for swing-leaf doors with direct current motor and return spring. Integrated microprocessor control unit with self-diagnosis and continuous verification of all door functions. Can be installed on either the lintel or on the door itself, with outward or inward opening. Activation arms in stainless steel, pushing or sliding type. Anti-crushing safety device active for both opening and closing. Function selector integrated into the operator with logics: Automatic - Manual - Open Self-learning of open and closed positions and measurement of door mass. Selectable closing stroke function ensures door stays closed even under strong wind. Selectable push and go function. Manual operation in case of power cut and closing with spring. Designed to be used with KP-CONTROLLER function keyboard. The following functions can be obtained using the programming unit: - opening and closing speed adjustment; - pause time adjustment; - adjustment of door opening width; - function logics: Manual - Open - Automatic - One Way - Night - interlock function; - master/slave version for double-leaf doors; - designed for installation of acoustic or lighting signaling devices; - self-diagnosis function. TECHNICAL SPECIFICATIONS OF 950N Power supply Absorbed power Absorbed current Electric motor 115Vac (+6% -10%) 50 (60) Hz 100 W 1A 24Vdc with encoder Dimensions (L x H x W) in mm 530 x 105 x 160 Weight Operating ambient temperature Protection class Frequency of use Operation in event of power failure Configuration of driving arms Anti-crushing device 10kg -20 C to +55 C IP 23 (indoor use only) Continuous duty Manual push/pull opening - Closing with spring Pushing articulated arm (version for jamb depth 0 to 250mm) Sliding arm (arm length 430mm) Sliding arm (arm length 330mm) Standard Opening angle 100 to 125 Opening speed Closing speed Accessories power supply Electric lock power supply 4 to 10 sec. (adjustable) 4 to 10 sec. (adjustabe) 24 Vdc / 500mA max (N.O / N.C) 24 Vdc / 500mA max 54 V0417

59 950N PARTS Operator c/w arm Item code 950N operator with control unit and pushing arm F N operator with control unit and sliding arm F950-S Operator arms only Item code Articulated pushing arm (max door post depth 250mm) Sliding arm (min leaf length 800mm) Shaft extension N PUSHING ARM - OUTWARD OPENING Automatic doors 0 to Max N SLIDING ARM - INWARD OPENING 0 to V

60 Accessories ACTIVATION AND SAFETY ACCESSORIES BEA superscan door safety Item code SSI BEA eagle motion sensor Item code EAGLE BEA bodyguard door sensor Item code BODYGUARD BEA bodyguard mounting bracket Item code BODYMOUNT BEA superscan II Item code SSII BEA push plate 6" Item code PBRLL Programmer's KP controller Item code Plug-in receiver Item code BEA remote Item code REMOTE BEA push plate mounting box Item code BOX6RNDSM Display for programmer Item code Hands free push plate Item code MS08 Wireless push plate kit: two push plates c/w transmitters, mounting box and one receiver Item code PBRLLWK Modified transmitter for push plate Item code M Full energy kit: one SSI, one EAGLE and one BODYGUARD Item code FEK 56 V0417

61 Pedestrian turnstile solution MPP 222 MPT 33 Half height turnstile Full height turnstile

62 Turnstile MPP 222 Half height pedestrian turnstile Half height outdoor rated pedestrian turnstile is designed to control pedestrians entering and exiting restricted areas. The turnstile is bi-directional which allows rotation in either direction. The ENTRY and EXIT commands allow users to pass through and then locks automatically afterwards. The unit comes equipped with a two-way high luminosity LED stop/go light. The housing is made of AISI 304 stainless steel with protection class of IP 44, no roofing required. DIMENSIONS AND TECHNICAL SPECIFICATIONS OF MPP 222 Power supply Vac, 50/60Hz Protection class IP 44 Absorbed current 200mA Duty cycle Continuous Dimensions (H x W) 40.75" x 30.5" Weight 60kg Operating ambient temperature -20 C to +50 C Finish Hot dipped galvanized steel Passage width 16.3" In the event of power failure unlocked - free passage in both directions 58 V0417

63 MPT 33 (3 Wing) Full height pedestrian turnstile The full height turnstile is designed to control pedestrians entering or exiting restricted areas. The modular system consists of four primary components that are easily assembled on site. The MPT turnstile is 88" tall and made of hot dipped galvanized steel components. It is robust and outdoor rated to withstand Canadian conditions. It contains an electro-mechanical locking device which releases the centre and turns 120 by hand. Pedestrian turnstile solution DIMENSIONS AND TECHNICAL SPECIFICATIONS OF MPT 33 Power supply Vac, 50/60Hz Protection class IP 43 Absorbed current 2.5A Duty cycle Dimensions Weight Operating ambient temperature Finish Operation In the event of power failure Continuous 88+/-" (height) 51+/-" (diameter) 320kg -20 C to +55 C Hot dipped galvanized steel MSC 10 control unit Locked (standard) Unlocked (optional) V

64

65 Accessories

66 Access PART NO DESCRIPTION FAAC stand alone keypad & proximity reader Stores up to 500 codes or cards with slave interface, 2 relay outputs & back light. Requires 12/24Vdc or 12Vac. Off-line only FAAC slave keypad & proximity reader for PC Proximity card for & AK-11 AKR-1 Linear stand alone keypad Stores up to 480 codes, 2 relay outputs. Requires 12/24Vac/Vdc. Off-line only. Linear stand alone keypad with receiver Stores up to 480 codes or transmitters, 2 relay outputs. Requires 12/24Vac/Vdc. Off-line only. ProxPad ProxPadPlusIR DTD ProxCardII Proxkey Fob Stand alone proximity reader with keypad 12Vdc Proximity reader with keypad and wireless infrared communication 12Vdc Data transfer device Upload user information and download audit trail from Prox Pad Plus IR. Proximity card for ProxPad & ProxPadPlusIR Proximity key fob for ProxPad & ProxPadPlusIR FALCON FALCONXL EAGLE EAGLEHM LZR IS40 REMOTE Industrial microwave motion detector High mount from 11.5' to 23'. Differentiate between people & vehicles, directional recognition and adjustable capabilities. See manual for more details. Industrial microwave motion detector Low mount up to 11.5'. Motion sensor (Up to 10') Motion sensor High mount up to 17'. BEA safety sensor with virtual push plate 30' x 30' detectiong zone. Motion and presence detector Remote control for BEA sensors 62 V0417

67 Communication PART NO DESCRIPTION DoorKing telephone entry system - surface mount Call button with keypad, stores up to 50 codes, does not require a dedicated phone line. See manual for more information A DoorKing telephone entry system access version - surface mount Provides ability to program via direct hook up to PC with included software. See manual for more information DoorKing telephone entry system - flush mount 1812-CO Colour camera option ( ) for 1812+, 1812+A or DoorKing slave keypad - surface mount DoorKing slave keypad - flush mount GSM-TES Telephone entry system with SIM card SIM card not included. Calls up to 3 numbers in sequence. GSM-500 IB Telephone entry system - multi resident Calls up to 500 apartments. Calls up to 3 numbers per apartment. GSM-WIFI-ABK Telephone entry system - predator wifi video Uses existing wifi to communicate with gate. Calls up to 4 devices. V

68 Miscellaneous PART NO DESCRIPTION PL-SS1 Surge protector power line 115Vac $ PL-SS2 Surge protector power line 220Vac $ TL-SS Surge protector phone line $ M day programmable timer 24 Vdc $ Provides one relay output with eight on/off times Enclosure type L $ Dimensions: 213 x 270 x 118mm (L x H x D) Enclosure type LM $ Dimensions: 246 x 353 x 142mm (L x H x D) PJ14126 PVC enclosure 14" x 12" x 6" NEMA 4 $ EJ12126 Metal enclosure 12" x 12" x 6" NEMA 4 $ GNC-1 Car height pedestal curb mount (42" high) black finish $ GNC-DH Dual height pedestal (42" & 72" high) black finish $ FAAC hydraulic HP2 oil - rated -36 1L bottle $ FAAC hydraulic HP2 oil - case includes 12 1L bottles $ FAAC viro key $ FAAC triangular release key $ FAAC key for model 412 $ V0417

69 Radio PART NO DESCRIPTION FAAC plug-in receiver 433Mhz FAAC plug-in receiver 433Mhz - 2 channel FAAC plug-in receiver (E024S style) 433Mhz FAAC transmitter quad button 433Mhz white FAAC interface card for / Provides NO output and connection for 24Vdc/Vac input. Requires plug-in receiver FAAC antenna for / / MGR AP-5 EXA-1000 ACT-31B ACT-34B MT-1B MT-2B Linear Mega Code gate receiver Vdc or Vac Linear Mega Code programmable radio receiver Stores up to 480 transmitters with 2 relay outputs. 12/24 Vdc or Vac required. Linear antenna for Linear receivers Keychain transmitter single button for MGR & AP-5 Keychain transmitter quad button for MGR & AP-5 Visor transmitter single button for MGR & AP-5 Visor transmitter dual button for MGR & AP-5 XR-1 T-124.8DC ANT-1A XT-1 T-1224DC ANT-2 XT-1H Extended range receiver Power supply (wall mount) for XR receiver Antenna 7" for XR-1 Extended range stationary transmitter Power supply (wall mount) for XT-1 Antenna 3' for XT-1 Extended range hand-held transmitter (Antenna included) V

70 Safety PART NO DESCRIPTION FAAC XP20B bus photocell FAAC wireless photocell FAAC XP20 adjustable photocell NC 24Vdc FAAC XP30 photocell NO/NC 24Vdc/Vac FAAC bus interface card LMA-1250SLV EDI loop detector 12-24Vdc or 12-24Vac - fail secure LMA-1250LV EDI loop detector 12-24Vdc or 12-24Vac - fail safe LMA-1250SHV EDI loop detector 115 or 220Vac - fail secure LMA-1250HV EDI loop detector 115 or 220Vac - fail safe Volume pricing is available for loop detectors. Please call for more information. LMH4-11 Loop detector harness RB11 Loop detector base (11 pin) RL20-40 EL24-60 EL32-60 SC20-50 SC24-50 SC32-50 Preformed loop 4' x 6' with 60' lead-in Preformed loop 4' x 8' with 60' lead-in Preformed loop 6' x 10' with 60' lead-in Preformed loop saw cut 4' x 6' with 50' lead-in Preformed loop saw cut 4' x 8' with 50' lead-in Preformed loop saw cut 6' x 10' with 50' lead-in FAAC light 24V FAAC LED light 24Vdc SKH Rotating beacon light 24Vac (Red/ Amber) FBL-1 Rotating beacon 115V (Red/Amber) BD3240 Piezo warning buzzer with volume control 24Vac/Vdc TL96-LV-YL TL96-LV-BK Red & green traffic light 12-24Vdc/Vac - yellow body Red & green traffic light 12-24Vdc/Vac - black body 66 V0417

71 Boards PART NO DESCRIPTION FAAC 455D controller 115Vac FAAC 455D controller 220Vac MOD FAAC 455D controller pre-wired with PVC enclosure (ESA approved) Model 455D controller is used with all AC swing gate operators. This board replaced 450MPS, 402MPS & 401MPS controllers FAAC E024S controller 22Vac Model E024S is used with DC swing gate operators FAAC E024S controller 22Vac with enclosure & transformer 1812P12 FAAC transformer torodial 24 V / 115 Vac FAAC E124 controller 22Vac FAAC E124 power supply board MOD FAAC E124 controller pre-wired c/w PVC enclosure (ESA approved) & power supply board FAAC E124 controller with plastic enclosure (non-esa) & power supply board FAAC E145 controller 115Vac FAAC E145 safecoder MOD FAAC E145 controller pre-wired with PVC enclosure (ESA approved) FAAC 740D controller 115Vac Model 740D is used with the 740 & 741 slide gate operators FAAC 780D controller 115Vac FAAC 780D controller 220Vac Model 780D is used with the 844 slide gate operator FAAC 624BLD controller 115Vac FAAC 624BLD controller 220Vac Model 624BLD is used with all barrier gates. This board replaces the 624MPS controller FAAC 8mf capacitor for 230Vac motors FAAC 16mf capacitor for 220Vac motors FAAC 25mf capacitor for 115Vac motors FAAC 30mf capacitor for 624BLD boards 115V FAAC 35mf capacitor for 780D boards 220V FAAC 70mf capacitor for 780D boards 115V V

72 AUTOMATED SYSTEMS FOR SWING GATES AUTOMATED SYSTEMS FOR SLIDE GATES AUTOMATIC BARRIERS TRAFFIC BOLLARDS AUTOMATIC DOORS TURNSTILES ACCESSORIES 1340 MID-WAY BLVD MISSISSAUGA, ON TEL (605) FAX (905)