Welders/Generators for engine-driven welders with SMAW welding process

Transcription

1 Welders/Generators for engine-driven welders with SMAW welding process

2 Selection Guide for the choice of our Welders/Generators Sincro welders/generators range is one of the most complete in the market including more than 20 models with SCR or electromechanical technology in 4 series (SW - ARC - ED - EA), developed for stick arc welding (SMAW Shielded Metal Arc Welding) and completely manufactured in Italy. Developed as power electric component on engine-driven welders for on site applications, they can be used intuitively as welders or generators. choice of THE MODE 1 2 ON SITE APPICATIONS EECTRODES MID HEAVY COATINGS MATERIAS 3 TECHNICA FEATURES ENGINE WEDER AC GENERATOR RPM HP (suggested) TECHNOOGY I DC I AC A MIN A MAX A 35% SCR EECTRONIC SERIES MODES FABRICATION (1) GENERA MAINTENANCE (2) CONSTRUCTION (3) PIPEINE (4) HYDRO & GAS SYSTEMS (5) HEAVY MAINTENANCE (6) RUTIE BASIC CEUOSIC INOX CAST-IRON SPECIA Amps A 60% A JUMP STARTER V BATTERY CHARGER HOT START ARC FORCE ANTI STICK REMOTE CONTRO THERMA PROTECTION BRUSHESS (exciter) BRUSHESS (capacitor) BRUSHES 3PH 400V/50HZ 1PH 0V/50HZ 60HZ IP SW ARC ED EA SW-I500 TDC/4 SW-F300 TDC/2 SW-F300 MDC/2 SW-E220 TDC/2 SW-E250 TDC/2 ARC400 TDC/2 ARC300 TDC/2 ARC300 MDC/2 ARC280 TDC/4 ED220 TDC/2 ED240 TDC/2 ED220 MDC/2 ED240 MDC/2 ED200 MDC/2 ED210 MDC/2 ED170 MDC/2 ED190 MDC/2 EA200 MAC/2 EA220 MAC/2 EA180 MAC/2 EA190 MAC/2 EA130 MAC/2 EA140 MAC/2 1500/ /24/ / / ,5/ / / / / , EECTRO MECHANICA / / , / / ,5/15-40/50 220/ / / ,5 3,5 12,5/15-40/50 220/ / / ,5/ / / ,5/11-45/50 170/ / / / / / / / / / ,5/ / / / SPECIFIC RATINGS AND VOTAGES CAN BE MADE ON REQUEST (1) Mild assembly works. (2) Repairs that require amperages of moderate intensity. (3) Welding of carpentry structures on site. (4) Welding with high level of complexity on oil and gas pipelines. (5) Welding of pipes on civil and industrial distribution systems. (6) Repairs that require amperages of high intensity. CHOICE OF THE MODE The identification of the right welder/generator depends on the application, the type of electrode and the features of the machine. 1) The first step is to determine the main application context. If you need to operate on mild works, an electromechanical model is suitable. If welding operations are carried out in a heavy context, then focus on a SCR technology model. 2) The choice of the model also depends on the type of electrode. For example, if cellulosic electrodes are necessary, we recommend our SW electronic models. 3) et s finally concentrate on the specific technical features of our welders/ generators. Is the engine working at 3000/3600 or at 1500/1800 rpm? After this first distinction, focus on the output current (DC or AC), the amps, the generator rating and any other data that, all together, uniquely define a specific model. CHOICE OF THE EECTRODE Electrodes, made of a conductive metal core, can have many types of coatings, whose composition influence the stability of the electric arc, the deposition of the material and the purity of the bath, and are divided into 3 main classes: 1) Rutile (E6013): to weld in any position as it is greatly easy to operate; 2) Basic (E7018): when weldings of high level are required; 3) Cellulosic (E6010): tipically for pipeline. The electrode diameter and the welding current (Amp) are interdependent. The ones on the table on the side are the typical international diameters. CHOICE OF THE EECTRODE (TYPICA) EECTRODE RUTIE BASIC CEUOSIC DIAMETER (mm) 2.0 AMPERERAGE RANGE

3 DC & AC Welders/Generators A with SCR or Electromechanical technology SW SW welders/generators based on SCR technology are the result of years of evolution in the design and manufacturing know-how of our technical team, in the ceaseless search for implementation and optimization of the performances. Developed on synchronous brushless (SW-I500) and brushes (SW-F300 and SW-E220/E250) machines, thanks to the electronic regulation of the welding current these latest models are suitable for the heaviest applications as pipeline, assuring an excellent stability and precision of the welding and the highest compatibility with any type of electrode. Besides the typical functions of DC welder ( A) and AC generator, they are also featured with Jump Starter and Battery Charger with protection against reverse polarity. Other important functions are: Hot Start, Arc Force and Anti-Stick. The polycarbonate front panel is equipped with a useful arrangement for remote control. ARC ED The ARC series with electromechanical technology includes 4 strong and high performing models used as a DC welder ( A) or an AC generator for mild applications requiring amperages of medium intensity. The welding current can be finely adjusted up to 36 steps, depending on the electrode diameter and the type and thickness of the material. All these models allow to weld with the most common types of electrodes. ED welders/generators with electromechanical technology are strong and reliable, suitable for mild applications and compatible with the most common types of electrodes. They can be used as a DC welder ( A) or an AC generator with a great precision of the welding current, manually adjustable up to 21 steps. The light weight and the compact dimensions are ideal for realizing easy to carry engine-driven welders. Constantly improved over the years thanks to the introduction of always new performing components and a constant evolution in the materials and production processes, nowadays the ED series is well known and appreciated all over the world, representing an absolute must for our customers. EA SW-I500 SW-F300 SW-E220 ARC300 ARC400 ARC280 IMG_3122.CR2 AWAYS AT WORK. SW-I500 model is realized on IB alternator with brushless excitation system. A precise technological choice that allows to avoid any periodic maintenance operation as there are neither brushes nor slip ring. Moreover, thanks to the 12 lead exit, the use as generator is possible with many different output voltages. ED220 ED200 ED170 EA200 EA180 EA130 The EA series is developed on electromechanical technology and is particularly suitable for mild assembly works with rutile electrodes. Used as an AC welder ( A) or an AC generator, these models allow the operator to manually adjust the welding current up to 14 steps. In their original design, these AC models were the first ones Sincro developed 20 years ago, among the very first manufacturers of welders/generators specifically developed for engine-driven welders. Today, made perfect in performances, they still represent a longseller of our company production. IMG_3131.CR2 IMG_3124.CR2 POYCARBONATE FRONT PANE. All models (except for ARC400 and ARC280) are equipped with an innovative polycarbonate front panel resistant both to wear and chemical agents (hydrocarbons), for a very intuitive use of each function. Its design makes our welders/ generators very pleasant to use and see. INTUITIVE WEDING REGUATION. On the electromechanical models, the welding current can be easily adjusted manually, depending on the electrode diameter and the type and thickness of the material. In this way job can always be carried out highly professionally, for a very smooth and uniform final result. A GREAT CARE FOR EACH DETAI. We think details can make the difference in the creation of an excellent product. This is why the shields have been manufactured with the greatest care, gently engraved with Sincro logo.

4 main overall dimensions H F IM B34... J609b... B3/B9... SAE W SEE THE DATASHEETS FOR FURTHER DATA F IM B34 J609b B3/B9 SAE W H mass mm mm mm mm mm mm mm Kg SW-I500 TDC/ N.A. N.A SW-F300 TDC/ SW-F300 MDC/ SW-E220 TDC/2 SW-E250 TDC/ ARC400 TDC/ ARC300 TDC/ ARC300 MDC/ ARC280 TDC/ ED220 TDC/2 ED240 TDC/ ED220 MDC/2 ED240 MDC/ ED200 MDC/2 ED210 MDC/ ED170 MDC/2 ED190 MDC/ EA200 MAC/2 EA220 MAC/ EA180 MAC/2 EA190 MAC/ EA130 MAC/2 EA140 MAC/ N.A. = NOT AVAIABE

5 Condizioni di garanzia Soga garantisce ai propri clienti gli alternatori, prodotti al suo interno, per un periodo di 18 mesi a decorrere dalla data di fatturazione, oppure di 12 mesi a decorrere dalla data di prima messa in funzione, a seconda di quale delle due avvenga per prima. Si precisa che detta garanzia è rivolta ai soli clienti di Soga ai quali direttamente risponde. Soga non riconosce direttamente la garanzia ad alcun soggetto che, pur in possesso dei suoi prodotti, non li abbia da essa acquistati direttamente. Entro i suddetti termini Soga si impegna a fornire gratuitamente pezzi di ricambio di quelle parti che, a giudizio di Soga o di un suo rappresentante autorizzato, presentino difetti di fabbricazione o di materiale oppure, a suo giudizio, ad effettuarne la riparazione direttamente o per mezzo di officine autorizzate senza assumersi alcun onere per il trasporto. Rimane comunque esclusa qualsiasi altra forma di responsabilità o obbligazione per altre spese, danni e perdite dirette o indirette derivanti dall uso o dalla impossibilità d uso dei prodotti, sia totale che parziale. a riparazione o la fornitura sostitutiva non prolungherà, né rinnoverà la durata del periodo di garanzia. a garanzia decadrà: qualora si manifestassero inconvenienti o guasti dovuti ad imperizia, utilizzo oltre ai limiti delle prestazioni nominali, se il prodotto avesse subito modifiche o se dovesse ritornare disassemblato o con dati di targa alterati o manomessi. Warranty conditions Soga guarantees the own alternators for a period of 18 months starting from the invoice date or 12 months starting from the first start up, whichever occurs first. We confirm that warranty is directed only to Soga customers to which we respond. Soga does not grant warranty to those who have not directly purchased the product from the factory, in spite of the possession of it. Within the above mentioned terms, Soga commits itself to supply free of charge those spare parts that, according to its judgment or to the one of an authorized representative, appear with manufacturing or material defects or, always to its judgment, to directly or through an authorized center carry out the repairing without undertaking transport costs. We anyhow exclude forms of responsibility or obligation for other costs, damages and direct or indirect loss caused by total or partial usage or impossible usage of the products. The repairing or the substitution will not extend or renew the warranty duration. Warranty will not be granted: whenever break-downs or problems may appear because of lack of experience, usage over the nominal performances, if the product had been modified or should return incomplete, disassembled or with modified nameplate data. Soga si riserva il diritto di modificare i dati per aggiornare o migliorare i propri prodotti senza alcun preavviso Soga reserves the right to change the data in order to update or improve its products without prior notice Sincro is a brand of Soga S.p.A. Via Della Tecnica, Montecchio Maggiore (VI) ITAY Operating office Via Tezze, Cereda di Cornedo Vicentino (VI) ITAY Ph Fax sales.sincro@sogaenergyteam.com Welders/Generators OVERVIEW N