uses magnetic induction technology (magnetic induction) with Powermat proprietary technology for wireless charging of handheld

Transcription

1 Powermat uses magnetic induction technology (magnetic induction) with Powermat proprietary technology for wireless charging of handheld devices, with fast, efficient, and wireless and so on. In fact, the scientific basis of this technique is well-known principle of electromagnetic induction. Package of additional products into the receiver and charger in two parts. - Overview Powermat wireless charging system is a high-tech wireless charging system : a plug, a wireless charging plate, you can assume that all handheld devices for charging. Powermat wireless charging system uses magnetic induction technology (magnetic

2 induction) with Powermat proprietary technology to charge, with a fast, efficient, and wireless and so on. [ 1 ] - Product Principle In fact, the scientific basis of this technique is well-known principle of electromagnetic induction, which can be traced back to more than a century before. 1830s, scientists Michael Faraday first discovered electromagnetic induction principle - changes in the surrounding magnetic field will produce a current in the wire. To the 1890s, an aide to Edison spectral radiant energy research projects, but also later scientist Nikola Tesla (Nikola Tesla) confirmed the possibility of wireless transmission of radio waves, and applied for the first patent. There are also over before the

3 practical application of inductive charging, but similar to those wireless charger can only charge a particular device. Powermat wireless charging system and the considerable amount of energy to power the electronics or recharge. Although it was many years ago with a Tesla had used the physical copper coils, but is able to control and monitor it and make it more effective than before. Put the handset on the charging surface mat board, it can identify the radio chip inside the phone only. [ 2 ] Powermat wireless charging system - an integral part of Receiver: the powermat contains only one receiver. To make powermat play a greater role, it needs to be able to charge multiple devices simultaneously. It is recommended to buy more than two

4 receivers. From your receiver needs about 1-2 inches of the battery, the cover can be removed for the mobile phone is concerned, the receiver is directly built into a replaceable cover. Therefore, the BlackBerry mobile phone, the replaceable cover easy to remove and increasing the thickness of only a little. But for the non- removable battery built handset is concerned, the receiver can be installed into a full protective shell, this way, it will also increase the ipod / iphone volume. Additional Chargers (PowerCube): PowerCube just an accessory powermat, which can be the equivalent of a "line" receivers for a variety of devices for charging. On the surface this powercube meaningless, but in fact, this device is still quite useful, PowerCube has the ability to replace the plug, so long as the top of this thin layer on top of a small white plate on powermat, it will be able to, such as sony, LG and other digital devices, including of course IPod and PSP. Thus, a number of products such as digital cameras and MP3 can also save the own charger. - Use Each board has three charging Powermat charging the receiving point, it must be adjusted for the location of the phone to let it start

5 charging. But do not worry, the attractiveness of the built-in magnet will help find these charging phone reception point. When the receiver is aligned with the receiving point, Powermat will issue a small sound and light behind the white LED. In fact, it 's extremely easy to use, but the user may want to explore the use of a few days to look to pinpoint the phone's location placement.