Double E Company Safety Chucks Catalog
|
|
- Gavin Rice
- 5 years ago
- Views:
Transcription
1 Superior Performance and Durability Double E Company Safety Chucks Catalog Easy, Affordable Replacements for Existing Safety Chucks Better Design, Higher Quality for New Applications
2 DOUBLE E COMPANY, LLC Revision Date August 211 2
3 SAFETY CHUCKS Introduction The Double E Company, the world s leading supplier of advanced web handling equipment to the paper, film, and foil converting industries, offers a complete line of safety chucks. Double E safety chucks feature a sliding jaw design that is safer and more efficient than tilting designs. Double E safety chucks can easily replace existing chucks at a lower purchase price and enhance worker safety while increasing productivity. In addition to up front savings, Double E safety chucks also offer jaws that can be replaced at a fraction of the cost of purchasing a new chuck. This feature dramatically reduces cost of ownership in the long run and facilitates operational changes that require multiple shaft/journal configurations. Double E s sliding safety chuck models utilize a patented push-button release mechanism to ensure worker safety, shaft stability, and effortless disengagement. Double E safety chucks can be ordered as either flange-mounted or pedestal-mounted, fixed or with sidelay adjustment. Chucks can be supplied with square, diamond, triangular, or circular engagement depending on customer specifications and application. Important features of the Double E Safety Chucks include: Jaw design compensates for shaft deflection; chuck does not bind. Sliding action significantly reduces possibility of finger jamming. Patented push-button design ensures roll security and operator safety. Patented circular engagement allows high torque while reducing noise and vibration. Removable jaws extend chuck life; easy and inexpensive to replace. Easy cross-references and retrofits for replacing existing safety chucks. 3
4 DOUBLE E COMPANY, LLC 4
5 Table of Contents SAFETY CHUCKS Introduction...3 Table of Contents...5 Double E Safety Chuck Naming System...7 Sample Order...1 Index of Standard Safety Chuck Models...11 Safety ChuckOptions...15 Sliding Safety Chuck Models and Options...16 Air Operated Safety Chucks...18 AC Option...19 Sidelay Safety Chuck Options...21 Radial Driver...22 Standard Safety ChuckModels &Dimensions...23 Fixed Safety Chucks... Sidelay Adjusted Safety Chucks...49 Sidelay Adjusted Safety Chucks With Splined Shaft Extension...75 Pneumatically Operated Safety Chucks...83 Boschert Equivalent Safety Chucks...97 Sidelay Adjusted Boschert Equivalent Safety Chucks...17 Rotary Tables/Movable Bases
6 DOUBLE E COMPANY, LLC 6
7 SAFETY CHUCKS Double E Safety Chuck Naming System Most technical features of Double E s safety chucks can be recognized from their alphanumeric abbreviations. The following guidelines will help describe the appropriate chuck for an application. Part I: Prefix Air Operated and Special Models can be recognized by their prefixes. These codes will come before the standard product abbreviation. It is possible to combine more than one of these options. AP = Air Operated (pneumatic) B = Boschert Equivalent (flange mount only) AC = Head Opening Detection (a pin runs through the chuck) AT = Air Through (air line runs through the chuck to the shaft) Part II: Load and Model The safety chuck s Maximum Load is indicated by a two letter code. Maximum load for sidelay adjusted chucks differs from the standard values shown below. Maximum load for sidelay adjusted chucks can be found on the drawing pages in this catalog. SL = up to 656 lbs (292 N) SM = up to 1618 lbs (72 N) SP = up to 3147 lbs (14, N) SU = up to 5845 lbs (26, N) NOTE: It is sometimes necessary to consider additional variables with the maximum load (such as shaft length and deflection) when selecting the best chuck for an application. Model Number is indicated by a three digit number immediately following the maximum load designation. You may occasionally see a two digit model number on older, tilting safety chucks already in place. Sliding Safety Chucks 1, 2 = Sliding safety chuck, fixed 5 = Sliding safety chuck, sidelay adjusted Part III: Mounting Style and Drive Mounting Style is indicated by either an F (flange mounted) or a P (pedestal mounted). F = Flange mounted P = Pedestal (Foot) Mounted 7
8 DOUBLE E COMPANY, LLC Motion Transmission = Idle (without any shaft extension for motion transmission) for fixed models 1 = Motorized (with shaft extension for motion transmission) for fixed and sidelay models 2 = Idle (with adjustment handwheel) for sidelay adjusted models S = Motorized (with splined shaft extension for motion transmission) for fixed and sidelay models Part IV: Jaw Type and Size Interchangeable Jaw Option I = Interchangeable jaws that can be disassembled from the safety chuck s central shaft. The interchangeable jaws option prolongs the useful life of the safety chuck. Rather than replacing the entire safety chuck, it is quick and inexpensive to replace only the jaw inserts. NOTE: All chucks can be ordered with fixed jaws or with the interchangeable jaw inserts. The interchangeable jaws provide the option of using more than one journal type with a single set of safety chucks. Engagement Type is shown by a single letter representing the shape of the jaws. The V and O types are standard models. The U and T types are available only by special order. V = Rhombus (square turned 45º), V shape = Circular (only available with interchangeable jaws) U = Square, U shape (special order) TC = Triangular (special order) NOTE: Circular jaws are only available with the interchangeable jaws option. They will always be designated as IO. Jaw Size is given as a range value on the catalog pages to determine the size of the safety chuck. When specifiying the safety chuck s jaw size on an order, it is necessary to sepcify a measurement in inches or mm (e.g. 35mm and 1.5 in [38.1mm] would be actual jaw sizes for the 3-4 range). 3-4 etc. = Minimum and Maximum jaw size NOTE: The maximum transmissible torque shown on the drawings is for a chuck at the upper limit of the size range (e.g. 4mm in the 3-4 jaw size range). If the customer has specific torque needs, please note this on the order. 8
9 SAFETY CHUCKS Part V: Sidelay Adjustment Options Sidelay Adjustment describes the axial travel of the chuck to align the roll on the machine accurately. The sidelay adjustment features a horizontal range of 2 or 4. There is also a fixed driveshaft option. The sidelay adjustment can be combined with a rotary table to allow alignment in two dimensions. Boschert and other companies may refer to Sidelay Adjustment as Sliding Adjustment. C5 = 5mm (~2 ) Sidelay Adjustment C1 = 1mm (~4 ) Sidelay Adjustment There are also two wheel options for the Sidelay Adjustment. The default wheel for the SL series is the hand wheel, while the default wheel for the SM and SP series is the cross-hand wheel (see page 21 of this manual). A Safety Chuck with Sidelay Adjustment 9
10 DOUBLE E COMPANY, LLC Sample Order When placing an order, please provide the complete safety chuck abbreviation; this will enable you to identify the ordered safety chuck clearly. The following example illustrates a completed safety 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø167 ø11 ø17 ø15 ø16 ø14 ø12 f8 Depth Standard Replaceable Inserts: Yes No V type O type 3-4 ø 5 U type T type Model: SM5/F2/IV3/C5 Max. Load per Safety Chuck = 1619 lbs. (72 N) SM) Safety chuck able to carry up to 1,619 lb-f (7,2 N) load. 5) Sliding type safety chuck, sidelay adjusted. F) Flange-mounting. 2) Motion transmission: idle, with handwheel I) Jaw Type: Inserts V) Jaw shape: V TYPE (SQUARE TURNED 45º JAW) 3) Requested jaw size: 3x3 mm. C5) Sidelay adjustment: 5 mm. 1
11 SAFETY CHUCKS Index of Standard Safety Chuck Models Model Number Maximum Load (lbs) (per safety chuck) Fixed Sliding Safety Chucks Maximum Load (N) (per safety chuck) SL1/F 787 3,5 1 SL1/F ,5 2 SL1/P 787 3,5 3 SL1/P ,5 4 Drawing Reference Number SM1/F 1,619 7,2 5 SM1/F1 1,619 7,2 6 SM1/P 1,619 7,2 7 SM1/P1 1,619 7,2 8 SP11/F 1,586 7,56 9 SP11/F1 1,586 7,56 1 SP11/P 1,586 7,56 11 SP11/P1 1,586 7,56 12 SP1/F 3,147 14, 13 SP1/F1 3,147 14, 14 SP1/P 3,147 14, 15 SP1/P1 3,147 14, 16 SU1/F 5,62, 17 SU1/F1 5,62, 18 SU1/P 5,62, 19 SU1/P1 5,62, 2 SU2/P 22,481 1, 21 SU2/P1 22,481 1, 22 11
12 DOUBLE E COMPANY, LLC Sidelay Adjusted Sliding Safety Chucks Model Number Maximum Load (lbs) (per safety chuck) Maximum Load (N) (per safety chuck) SL5/F2/.../C ,5 23 SL5/F1/.../C ,5 24 SL5/F2/.../C , SL5/F1/.../C , 26 SL5/P2/.../C ,5 27 SL5/P1/.../C ,5 28 SL5/P2/.../C , 29 SL5/P1/.../C , 3 Drawing Reference Number SM5/F2/.../C5 1,619 7,2 31 SM5/F1/.../C5 1,619 7,2 32 SM5/F2/.../C1 1,124 5, 33 SM5/F1/.../C1 1,124 5, 34 SM5/P2/.../C5 1,619 7,2 35 SM5/P1/.../C5 1,619 7,2 36 SM5/P2/.../C1 1,124 5, 37 SM5/P1/.../C1 1,124 5, 38 SP5/F2/.../C5 3,147 14, 39 SP5/F1/.../C5 3,147 14, 4 SP5/F2/.../C1 2,248 1, 41 SP5/F1/.../C1 2,248 1, 42 SP5/P2/.../C5 3,147 14, 43 SP5/P1/.../C5 3,147 14, 44 SP5/P2/.../C1 2,248 1, 45 SP5/P1/.../C1 2,248 1, 46 12
13 Sidelay Adjusted Safety Chucks with Splined Shaft Extension Model Number Maximum Load (lbs) (per safety chuck) Maximum Load (N) (per safety chuck) SL5/FS/.../C ,5 47 SL5/PS/.../C ,5 48 SAFETY CHUCKS Drawing Reference Number SM5/FS/.../C5 1,618 7,2 49 SM5/PS/.../C5 1,618 7,2 5 SP5/FS/.../C5 3,147 14, 51 SP5/PS/.../C5 3,147 14, 52 SP5/FS/.../C1 2,248 1, 53 Pneumatically Operated Safety Chucks Model Number Maximum Load (lbs) (per safety chuck) Maximum Load (N) (per safety chuck) AP/SL1/F 787 3,5 54 AP/SL1/F ,5 55 AP/SL1/P 787 3,5 56 AP/SL1/P ,5 57 Drawing Reference Number AP/SM1/F 1,619 7,2 58 AP/SM1/F1 1,619 7,2 59 AP/SM1/P 1,619 7,2 6 AP/SM1/P1 1,619 7,2 61 AP/SP1/F 3,147 14, 62 AP/SP1/F1 3,147 14, 63 AP/SP1/P 3,147 14, 64 AP/SP1/P1 3,147 14, 65 13
14 DOUBLE E COMPANY, LLC Boschert Equivalent Safety Chucks Model Number Maximum Load (lbs) (per safety chuck) Maximum Load (N) (per safety chuck) B/SL1/F 45 2, 66 B/SL1/F1 45 2, 67 Drawing Reference Number B/SM1/F 899 4, 68 B/SM1/F , 69 B/SP1/F 1,798 8, 7 B/SP1/F1 1,798 8, 71 B/SPP1/F 3,147 14, 72 B/SPP1/F1 3,147 14, 73 Sidelay-adjusted Boschert Equivalent Safety Chucks Model Number Maximum Load (lbs) (per safety chuck) Maximum Load (N) (per safety chuck) B/SM5/F2/.../C , 74 B/SM5/F1/.../C , 75 Drawing Reference Number B/SP5/F2/.../C5 1,574 7, 76 B/SP5/F1/.../C5 1,574 7, 77 Rotary Tables/Movable Bases Model Number Drawing Reference Number BS/P1/SM5/SM1 78 BS/P2/SM5/SM1 79 BS/P1/SP5/SP1 8 BS/P2/SP5/SP
15 SAFETY CHUCKS Safety Chuck Options 15
16 DOUBLE E COMPANY, LLC Sliding Safety Chuck Models and Options All Double E safety chucks feature a sliding front plate instead of the more traditional tilting front plate. This design is safer, easier to operate, and more rugged than tilting designs. The chuck opens with a patented push-button mechanism and does away with the need to use a mallet to open the chuck. The chuck will only open in the upright position to guarantee roll security and closes automatically if the operator forgets to close it manually. In addition, the sliding action reduces finger jamming accidents that are common with tilting models. All models can be ordered with either 2 (5 mm) or 4 (1 mm) sidelay adjustment. They can also be ordered with air-operated opening and closing when the chucks are in hard to reach locations. In these models, the opening and closing of the chuck occurs due to air pressure applied to the inside of the chuck. Models SL1 = 787 lb-f. (35 N) load sliding safety chuck, fixed. SM1 = 1619 lb-f. (72 N) load sliding safety chuck, fixed. SP11* = 1586 lb-f. (756 N) load sliding safety chuck, fixed. SP1 = 3147 lb-f. (14, N) load sliding safety chuck, fixed. SU1 = 562 lb-f. (, N) load sliding safety chuck, fixed. SU2 = 22,481 lb-f. (1, N) load sliding safety chuck, fixed. SL5 = 787 lb-f (35 N) sliding safety chuck, sidelay adjusted. SM5 = 1619 lb-f. (72 N) sliding safety chuck, sidelay adjusted. SP5 = 3147 lb-f. (14, N) sliding safety chuck, sidelay adjusted. NOTE: The SP11 safety chucks have the same overall dimensions and features as the older SP1 (that Double E has discontinued) chucks with tilting opening. They can, therefore, be suggested as an alternative to traditional, tilting models. Jaw Types Sliding safety chucks can be manufactured with four different types of chuck/shaft engagement [see drawings on page 8 of this manual]: V type - rhombus (square rotated 45º) [Standard] O type - circular/round, patented [Standard] U type - square [Special] TC type - triangular [Special] All four jaw types can are available with interchangeable jaws. With this option, the jaws can be disassembled from the safety chuck s central shaft and replaced by a new set. The new one can be 16
17 SAFETY CHUCKS either the same type/size or different to fit another application. This option lowers long-term operating costs with less expensive replacements, reduces machine down time, and creates a more flexible Flange-mounted Safety Chuck Pedestal-mounted Safety Chuck operating environment for customers who run multiple applications on a single machine. Chuck Mounting Safety chucks can be either flange-mounted (F) or pedestal-mounted (P). See images above. Motion Transmission The safety chucks can be either idlers or motorized. Usually, one side will be an idler while the other will be a driver (using either a brake or a motor). Idlers run free and rotate through the reel-holding shaft. On the opposite side, there will normally be a motorized chuck. On the sidelay adjusted models, there is a rear handwheel for controlling the sidelay adjustment. Motorized chucks have a rear shaft extension that enables the motion transmission and/or brake fitting in both fixed and sidelay adjusted models. The drive shaft can also be made as a splined shaft to enable the roll to move even when the safety chuck shaft remains fixed. 17
18 Double E vs Boschert Safety Chuck Comparison (max. RPM) Double E Sliding Safety Chucks U-series V-series VTC (triangular) O-series (circular) (balanced) 9 11 (optional) 18 Boschert Tilting Safety Chucks VT6 VT7 VT1 VT2** (standard) **Boschert VT-2 tilting safety chucks can handle only 6% of the torque and load of a Double E V-series sliding chuck due to the diminished contact zone caused by the tilting face.
19 Air Operated Safety Chucks All Double E fixed safety chuck models can be manufactured with pneumatic operations. These models are identified with the AP prefix at the beginning of a chuck s model code. Pneumatic safety chucks offer an ideal solution for applications where operator access to the safety chucks would be difficult and/or unsafe. SAFETY CHUCKS Air lines on a pneumatic chuck. Pneumatic Safety Chuck Proximity Sensors Double E s pneumatic safety chucks can also include proximity sensors that can be integrated with the customer s existing controller to make sure that the chucks are closed before operating the machine. Double E safety chucks can use a combination of three sensors to insure that the chucks are closed and to increase plant safety. Sensors beneath the chuck s face relay whether the chuck is open or closed. A third sensor at the rear of the chuck uses a pin to indicate the chuck s orientation. Open and Closed Proximity Sensors Rear sensor on a pneumatic safety chuck (idler side). Pneumatic Safety Chuck with Proximity Sensors 19
20 DOUBLE E COMPANY, LLC AC Option The AC option on sliding safety chucks uses a pin through the safety chuck to detect and to signal when the chuck s face plate is open. It is especially useful in turret applications where the operator needs to know if the chuck is closed. In turret applications, the proximity sensor is tied to a kill switch that prevents the turret from turning while the chuck is open. AC Option with Face Plate Closed AC Option with Face Plate Open 2
21 SAFETY CHUCKS AT Option The AT option on sliding safety chucks is usually reserved for applications using differential shafts. The AT stands for air through and runs an air line through the safety chuck that connects to one on the shaft. This option is needed when there is not enough space on the journal for an air valve. 21
22 DOUBLE E COMPANY, LLC Sidelay Safety Chuck Options Rotary Table Double E safety chucks feature a rotary table option for applications that need to correct for baggy edges. When combined with sidelay adjustment, the rotary table gives customers the ability to make web adjustments in two dimensions. See the Rotary Tables section of this catalog for more detailed information. Wheel Style There are two styles of wheels currently available for Double E s sidelay adjustment safety chucks: a hand wheel and a cross-hand wheel. The hand wheel is the default option on rotary tables and SL series safety chucks. The cross-hand wheel is the default option for SM series and SP series safety Cross-hand Wheel Hand Wheel chucks. 22
23 SAFETY CHUCKS Radial Driver A radial driver option is available for Double E safety chucks with the U, V, and TC engagement types. The radial driver helps maintain and secure the shaft during automatic sliding head closing of the chuck under rotation. Radial drivers can be especially helpful when using V-shaped jaws with a light shaft. This option is strongly recommended by Double E for rewind applications on a turret. Safety Chuck with Radial Driver Safety Chuck without Radial Driver Shaft Grooves for Radial Driver in a V-style engagement. 23
24 DOUBLE E COMPANY, LLC 24
25 SAFETY CHUCKS Standard Safety Chuck Models & Dimensions
26 DOUBLE E COMPANY, LLC 26
27 SAFETY CHUCKS Fixed Safety Chucks 27
28 DOUBLE E COMPANY, LLC 15 9 ø13,5 ø8,5 Depth ø12 ø1 ø8 f8 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø128 Standard -3 ø 35 Model: SL1/F/(I)V-3 SL1/F/IO35 Max. Load per Safety Chuck = 787 lbs. (35 N)
29 SAFETY CHUCKS Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 45 ø128 UNI Depth ø12 ø1 Max ø = 35 g6 ø8 f8 ø13.5 ø Standard ø 35 Model: SL1/F1/(I)V-3 SL1/F1/IO35 Maximum Load per Safety Chuck = 787 lbs. (35 N) Maximum Transmissable Torque** = 221 lbf-ft (3 Nm) ** Values shown for maximum ø and standard spindle length. 29
30 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com -3 ø 35 Model: SL1/P/(I)V-3 SL1/P/IO35 ø11 Depth Max. Load per Safety Chuck = 787 lbs. (35 N) 3 5 ø86 ø128 Standard
31 SAFETY CHUCKS ø Model: SL1/P1/(I)V-3 SL1/P1/IO UNI 664 ø11 Depth Maximum Load per Safety Chuck = 787 lbs. (35 N) Maximum Transmissable Torque** = 221 lbf-ft (3 Nm) ** Values shown for maximum ø and standard spindle length. ø86 Max ø = 35 g6 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com Standard ø 35 31
32 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø ø 5 Model: SM1/F/(I)V3-4 SM1/F/IO Max. Load per Safety Chuck = 1619 lbs. (72 N) 5 ø15 ø13 ø1 f8 ø17 ø11 Standard Depth
33 SAFETY CHUCKS Model: SM1/F1/(I)V3-4 SM1/F1/IO UNI Maximum Load per Safety Chuck = 1619 lbs. (72 N) Maximum Transmissable Torque** = 664 lbf-ft (9 Nm) ** Values shown for maximum ø and standard spindle length. ø15 ø13 Max ø = 45 g6 ø1 f8 ø17 ø Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø167 Standard 3-4 ø 5 5 Depth
34 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 3-4 ø 5 Model: SM1/P/(I)V3-4 SM1/P/IO5 Max. Load per Safety Chuck = 1619 lbs. (72 N) 7 6 ø ø13 Depth ø15 Standard
35 SAFETY CHUCKS Model: SM1/P1/(I)V3-4 SM1/P1/IO UNI 664 ø13 Depth Maximum Load per Safety Chuck = 1619 lbs. (72 N) Maximum Transmissable Torque** = 664 lbf-ft (9 Nm) ** Values shown for maximum ø and standard spindle length. 6 ø15 Max ø = 45 g6 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø Standard ø 5 35
36 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 3-4 ø 5 Model: SP11/F/(I)V3-4 SP11/F/IO Max. Load per Safety Chuck = 1586 lbs. (756 N) 9 ø15 ø17 ø11 Depth ø128 ø1 f8 Standard ø
37 SAFETY CHUCKS Model: SP11/F1/(I)V3-4 SP11/F1/IO UNI ø1 f8 3 1 Maximum Load per Safety Chuck = 1586 lbs. (756 N) Maximum Transmissable Torque** = 694 lbf-ft (94 Nm) ** Values shown for maximum ø and standard spindle length. ø15 Max ø = 45 g6 ø17 ø11 5 Depth ø Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø167 Standard ø 5 37
38 DOUBLE E COMPANY, LLC 11 Depth ø17 ø Model: SP11/P/(I)V3-4 SP11/P/IO5 51 Max. Load per Safety Chuck = ø *All Footprint Dimensions Typical 45 4 Footprint Ø ø lbs. (756 N) Standard U type T type 7 APPROVED AUTHORIZED SIGNATURE COMPANY NAME DATE **Please note, machine frame must match footprint geometry to avoid interference with sliding head. 38
39 SAFETY CHUCKS Model: SP11/P1/(I)V3-4 SP11/P1/IO5 UNI Depth ø *All Footprint Dimensions Typical 4 Footprint Maximum Load per Safety Chuck = 1586 lbs. (756 N) Maximum Transmissable Torque** = 694 lbf-ft (94 Nm) ** Values shown for maximum ø and standard spindle length. 3 6 ø11 Max ø = 45 g6 ø Standard ø 5 U type T type Ø **Please note, machine frame must match footprint geometry to avoid interference with sliding head. 39
40 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 4-5 ø 55 Model: SP1/F/(I)V4-5 SP1/F/IO ø19 ø13 Depth Max. Load per Safety Chuck = 3147 lbs. (14 N) ø175 ø15 ø1 f8 ø197 Standard
41 SAFETY CHUCKS Model: SP1/F1/(I)V4-5 SP1/F1/IO Maximum Load per Safety Chuck = 3147 lbs. (14 N) Maximum Transmissable Torque** = 959 lbf-ft (13 Nm) ** Values shown for maximum ø and standard spindle length. ø175 ø15 Max ø = 55 g6 ø19 ø13 5 Depth 3 ø1 f8 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø197 Standard 4-5 ø 55 7 UNI
42 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 4-5 ø 55 Model: SP1/P/(I)V4-5 SP1/P/IO55 15 ø17 Depth Max. Load per Safety Chuck = 3147 lbs. (14 N) 75 ø13 ø197 Standard
43 SAFETY CHUCKS Model: SP1/P1/(I)V4-5 SP1/P1/IO UNI 664 ø17 Depth Maximum Load per Safety Chuck = 3147 lbs. (14 N) Maximum Transmissable Torque** = 959 lbf-ft (13 Nm) ** Values shown for maximum ø and standard spindle length. 75 ø13 Max ø = 55 g6 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø Standard ø 55 43
44 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 5-1 ø 85 Model: SU1/F/(I)V5-1 SU1/F/IO ø ø17 Depth Max. Load per Safety Chuck = 562 lbs. ( N) ø ø22 ø19 f8 ø7 Standard
45 SAFETY CHUCKS Model: SU1/F1/(I)V5-1 SU1/F1/IO UNI Maximum Load per Safety Chuck = 562 lbs. ( N) Maximum Transmissable Torque** = 1947 lbf-ft (264 Nm) ** Values shown for maximum ø and standard spindle length. ø ø22 Max ø = 85 g6 ø19 f8 ø ø Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø 7 Standard 5-1 ø 85 5 Depth
46 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 5-1 ø 85 Model: SU1/P/(I)V5-1 SU1/P/IO85 19 ø17 Depth Max. Load per Safety Chuck = 562 lbs. ( N) 15 ø 197 ø7 Standard
47 SAFETY CHUCKS 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) ø7 5 Model: SU1/P1/(I)V5-1 SU1/P1/IO UNI 664 ø17 Depth Maximum Load per Safety Chuck = 562 lbs. ( N) Maximum Transmissable Torque** = 1947 lbf-ft (264 Nm) ** Values shown for maximum ø and standard spindle length ø197 Max ø = 85 g Standard ø 85 47
48 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 12 ø Model: SU2/P/(I)V12 SU2/P/IO Depth 5 ø Max. Load per Safety Chuck = lbs. (1 N) ø273 ø Standard
49 SAFETY CHUCKS Model: SU2/P1/(I)V12 SU2/P1/IO 9 UNI Depth 5 ø Maximum Load per Safety Chuck = lbs.(1 N) Maximum Transmissable Torque** = 3688 lbf-ft (5 Nm) ** Values shown for maximum ø and standard spindle length ø273 Max ø = Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø Standard ø 49
50 DOUBLE E COMPANY, LLC 5
51 SAFETY CHUCKS Sidelay Adjusted Safety Chucks 51
52 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com -3 ø 35 Model: SL5/F2/(I)V-3/C5 SL5/F2/IO35/C ø13 ø1 f8 ø8.5 ø Depth 4 12 Max. Load per Safety Chuck = 787 lbs. (35 N) ø12 ø115 ø128 4 Standard
53 SAFETY CHUCKS Model: SL5/F1/(I)V-3/C5 SL5/F1/IO35/C Maximum Load per Safety Chuck = 787 lbs. (35 N) Maximum Transmissable Torque** = 221 lbf-ft (3 Nm) ** Values shown for maximum ø and standard spindle length. ø13 ø115 Max ø = 35 g6 ø1 f8 ø8.5 ø Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø128 5 Depth ø8 Standard -3 ø UNI
54 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com -3 ø 35 Model: SL5/F2/(I)V-3/C1 SL5/F2/IO35/C ø13 ø115 ø1 f8 ø8.5 ø13.5 ø128 5 Depth Max. Load per Safety Chuck = 674 lbs. (3 N) ø Standard
55 SAFETY CHUCKS Model: SL5/F1/(I)V-3/C1 SL5/F1/IO35/C Maximum Load per Safety Chuck = 674 lbs. (3 N) Maximum Transmissable Torque** = 221 lbf-ft (3 Nm) ** Values shown for maximum ø and standard spindle length. ø13 ø115 Max ø = 35 g6 ø1 f8 ø8.5 ø Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 45 UNI ø Depth ø8 55 Standard -3 ø
56 DOUBLE E COMPANY, LLC Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 5 ø128 ø11 Depth ø12 ø Standard ø 35 Model: SL5/P2/(I)V-3/C5 SL5/P2/IO35/C5 Max. Load per Safety Chuck = 787 lbs. (35 N) 56
57 SAFETY CHUCKS 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) ø128 Model: SL5/P1/(I)V-3/C5 SL5/P1/IO35/C UNI Depth ø Maximum Load per Safety Chuck = 787 lbs. (35 N) Maximum Transmissable Torque** = 221 lbf-ft (3 Nm) ** Values shown for maximum ø and standard spindle length ø1 ø8 Max ø = 35 g Standard ø 35 57
58 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø ø 35 Model: SL5/P2/(I)V-3/C1 SL5/P2/IO35/C Depth Max. Load per Safety Chuck = 674 lbs. (3 N) 2 55 ø ø ø1 Standard
59 SAFETY CHUCKS 45 UNI Model: SL5/P1/(I)V-3/C1 SL5/P1/IO35/C1 3 1 Depth Maximum Load per Safety Chuck = 674 lbs. (3 N) Maximum Transmissable Torque** = 221 lbf-ft (3 Nm) ** Values shown for maximum ø and standard spindle length. ø8 Max ø = 35 g ø1 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø ø Standard ø 35 59
60 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 3-4 ø 5 Model: SM5/F2/(I)V3-4/C5 SM5/F2/IO5/C ø16 ø12 f8 ø11 ø Depth Max. Load per Safety Chuck = 1619 lbs. (72 N) ø15 ø14 ø Standard
61 SAFETY CHUCKS Model: SM5/F1/(I)V3-4/C5 SM5/F1/IO5/C UNI Maximum Load per Safety Chuck = 1619 lbs. (72 N) Maximum Transmissable Torque** = 664 lbf-ft (9 Nm) ** Values shown for maximum ø and standard spindle length. ø16 ø14 Max ø = 45 g6 ø12 f8 ø11 ø17 ø167 5 Depth ø1 Standard 3-4 ø
62 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 3-4 ø 5 Model: SM5/F2/(I)V3-4/C1 SM5/F2/IO5/C ø16 ø14 ø12 f8 ø11 ø17 ø167 5 Depth Max. Load per Safety Chuck = 1124 lbs. (5 N) ø Standard
63 SAFETY CHUCKS Model: SM5/F1/(I)V3-4/C1 SM5/F1/IO5/C Maximum Load per Safety Chuck = 1124 lbs. (5 N) Maximum Transmissable Torque** = 664 lbf-ft (9 Nm) ** Values shown for maximum ø and standard spindle length. ø16 ø14 Max ø = 45 g6 ø12 f8 ø11 ø Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 7 UNI ø Depth ø Standard ø 5 63
64 DOUBLE E COMPANY, LLC Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 5 ø167 ø13 Depth 3 ø15 ø Standard ø 5 Model: SM5/P2/(I)V3-4/C5 SM5/P2/IO5/C5 Max. Load per Safety Chuck = 1619 lbs. (72 N) 64
65 SAFETY CHUCKS 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) ø167 Model: SM5/P1/(I)V3-4/C5 SM5/P1/IO5/C UNI Depth 3 ø Maximum Load per Safety Chuck = 1619 lbs. (72 N) Maximum Transmissable Torque** = 664 lbf-ft (9 Nm) ** Values shown for maximum ø and standard spindle length. 7 ø12 ø1 Max ø = 45 g Standard ø 5 65
66 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø Standard 3-4 ø 5 Model: SM5/P2/(I)V3-4/C1 SM5/P2/IO5/C Depth Max. Load per Safety Chuck = 1124 lbs. (5 N) 7 ø ø ø
67 SAFETY CHUCKS 7 UNI Model: SM5/P1/(I)V3-4/C1 SM5/P1/IO5/C Depth Maximum Load per Safety Chuck = 1124 lbs. (5 N) Maximum Transmissable Torque** = 664 lbf-ft (9 Nm) ** Values shown for maximum ø and standard spindle length. ø1 Max ø = 45 g ø Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø ø Standard ø 5 67
68 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 4-5 ø 55 Model: SP5/F2/(I)V4-5/C5 SP5/F2/IO55/C ø2 ø15 f8 ø13 ø Depth Max. Load per Safety Chuck = 3147 lbs. (14 N) ø15 ø175 ø197 Standard
69 SAFETY CHUCKS Model: SP5/F1/(I)V4-5/C5 SP5/F1/IO55/C5 4 UNI Maximum Load per Safety Chuck = 3147 lbs. (14 N) Maximum Transmissable Torque** = 959 lbf-ft (13 Nm) ** Values shown for maximum ø and standard spindle length. ø2 ø175 Max ø = 55 g6 ø15 f8 ø13 ø Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø Depth ø1 Standard ø 55 69
70 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 4-5 ø 55 Model: SP5/F2/(I)V4-5/C1 SP5/F2/IO55/C ø2 ø175 ø15 f8 ø13 ø19 ø197 5 Depth Max. Load per Safety Chuck = 2248 lbs. (1 N) ø Standard
71 SAFETY CHUCKS Model: SP5/F1/(I)V4-5/C1 SP5/F1/IO55/C Maximum Load per Safety Chuck = 2248 lbs. (1 N) Maximum Transmissable Torque** = 959 lbf-ft (13 Nm) ** Values shown for maximum ø and standard spindle length. ø2 ø175 Max ø = 55 g6 ø15 f8 ø13 ø Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 7 UNI ø Depth ø1 6 Standard 4-5 ø
72 DOUBLE E COMPANY, LLC Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 5 ø197 ø17 Depth 3 ø15 ø Standard ø 55 Model: SP5/P2/(I)V4-5/C5 SP5/P2/IO55/C5 Max. Load per Safety Chuck = 3147 lbs. (14 N) 72
73 SAFETY CHUCKS 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) UNI 664 ø Model: SP5/P1/(I)V4-5/C5 SP5/P1/IO55/C Depth 3 ø Maximum Load per Safety Chuck = 3147 lbs. (14 N) Maximum Transmissable Torque** = 959 lbf-ft (13 Nm) ** Values shown for maximum ø and standard spindle length. ø15 ø1 Max ø = 55 g Standard ø 55 73
74 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 4-5 ø 55 Model: SP5/P2/(I)V4-5/C1 SP5/P2/IO55/C Depth Max. Load per Safety Chuck = 2248 lbs. (1 N) ø ø ø15 ø Standard
75 SAFETY CHUCKS 7 UNI Model: SP5/P1/(I)V4-5/C1 SP5/P1/IO55/C Depth Maximum Load per Safety Chuck = 2248 lbs. (1 N) Maximum Transmissable Torque** = 959 lbf-ft (13 Nm) ** Values shown for maximum ø and standard spindle length. ø1 Max ø = 55 g ø ø Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø Standard ø 55 75
76 DOUBLE E COMPANY, LLC 76
77 SAFETY CHUCKS Sidelay Adjusted Safety Chucks With Splined Shaft Extension 77
78 DOUBLE E COMPANY, LLC Model: SL5/FS/(I)V-3/C5 SL5/FS/IO35/C5 47 ø1 f ø8.5 ø Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 45 ø128 UNI Depth Maximum Load per Safety Chuck = 787 lbs. (35 N) Maximum Transmissable Torque** = 221 lbf-ft (3 Nm) ** Values shown for maximum ø and standard spindle length. ø13 ø115 Max ø = 35 g6 Standard ø 35 78
79 SAFETY CHUCKS 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) ø128 UNI Model: SL5/PS/(I)V-3/C5 SL5/PS/IO35/C Depth ø Maximum Load per Safety Chuck = 787 lbs. (35 N) Maximum Transmissable Torque** = 221 lbf-ft (3 NM) ** Values shown for maximum ø and standard spindle length ø1 Max ø = 35 g Standard ø 35 79
80 DOUBLE E COMPANY, LLC Model: SM5/FS/(I)V3-4/C5 SM5/FS/IO5/C5 49 ø12 f ø17 ø Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 7 ø167 UNI Depth Maximum Load per Safety Chuck = 1618 lbs. (72 N) Maximum Transmissable Torque** = 664 lbf-ft (9 Nm) ** Values shown for maximum ø and standard spindle length. ø16 ø14 Max ø = 45 g6 Standard ø 5 8
81 SAFETY CHUCKS 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) ø167 UNI Model: SM5/PS/(I)V3-4/C5 SM5/PS/IO5/C Depth 3 ø Maximum Load per Safety Chuck = 1618 lbs. (72 N) Maximum Transmissable Torque** = 664 lbf-ft (9 Nm) ** Values shown for maximum ø and standard spindle length. 7 ø12 Max ø = 45 g Standard ø 5 81
82 DOUBLE E COMPANY, LLC Model: SP5/FS/(I)V4-5/C5 SP5/FS/IO55/C5 51 ø15 f ø13 ø Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 7 ø197 UNI Depth Maximum Load per Safety Chuck = 3147 lbs. (14 N) Maximum Transmissable Torque** = 959 lbf-ft (13 Nm) ** Values shown for maximum ø and standard spindle length. ø2 ø175 Max ø = 55 g6 Standard ø 55 82
83 SAFETY CHUCKS 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) ø197 UNI Model: SP5/PS/(I)V4-5/C5 SP5/PS/IO55/C Depth 3 ø Maximum Load per Safety Chuck = 3147 lbs. (14 N) Maximum Transmissable Torque** = 959 lbf-ft (13 Nm) ** Values shown for maximum ø and standard spindle length ø15 Max ø = 55 g Standard O type 4-5 ø 55 83
84 DOUBLE E COMPANY, LLC Model: SP5/FS/(I)V4-5/C1 SP5/FS/IO55/C1 53 ø15 f ø13 ø Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 6 ø197 UNI Depth Maximum Load per Safety Chuck = 2248 lbs. (1 N) Maximum Transmissable Torque** = 959 lbf-ft (13 Nm) ** Values shown for maximum ø and standard spindle length. ø2 ø175 Max ø = 55 h7 Standard 4-5 ø 55 Ø
85 SAFETY CHUCKS Pneumatically Operated Safety Chucks 85
86 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com -3 ø 35 Model: AP/SL1/F/(I)V-3 AP/SL1/F/IO Depth Max. Load per Safety Chuck = 787 lbs. (35 N) 54 ø12 ø1 ø8 f8 ø13.5 ø8.5 ø184 Standard Jaw Orientation Sensor (optional) Open/Close Sensors (optional)
87 SAFETY CHUCKS Model: AP/SL1/F1/(I)V-3 AP/SL1/F1/IO UNI Depth Maximum Load per Safety Chuck = 787 lbs. (35 N) Maximum Transmissable Torque** = 221 lbf-ft (3 Nm) ** Values shown for maximum ø and standard spindle length. ø12 ø1 ø8 f8 Max ø = 35 g6 ø13.5 ø Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø184 Standard -3 ø Open/Close Sensors (optional)
88 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø184 Standard -3 ø 35 Model: AP/SL1/P/(I)V-3 AP/SL1/P/IO35 56 Max. Load per Safety Chuck = 787 lbs. (35 N) ø Jaw Orientation Sensor (optional) Depth ø11 Open/Close Sensors (optional)
89 SAFETY CHUCKS Model: AP/SL1/P1/(I)V-3 AP/SL1/P1/IO UNI 664 Depth 5 ø11 Maximum Load per Safety Chuck = 787 lbs. (35 N) Maximum Transmissable Torque** = 221 lbf-ft (3 Nm) ** Values shown for maximum ø and standard spindle length. ø86 Max ø = 35 g6 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø Standard -3 ø 35 Open/Close Sensors (optional)
90 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com Standard 3-4 ø 5 Model: AP/SM1/F/(I)V3-4 AP/SM1/F/IO ø15 ø13 ø1 f8 ø17 ø11 ø Depth 3 Max. Load per Safety Chuck = 1619 lbs. (72 N) Jaw Orientation Sensor (optional) Open/Close Sensors (optional)
91 SAFETY CHUCKS Model: AP/SM1/F1/(I)V3-4 AP/SM1/F1/IO UNI Maximum Load per Safety Chuck = 1619 lbs. (72 N) Maximum Transmissable Torque** = 664 lbf-ft (9 Nm) ** Values shown for maximum ø and standard spindle length. ø13 Max ø = 45 g6 ø1 f8 ø17 ø11 ø216 Depth 3 ø15 Standard 3-4 ø 5 Open/Close Sensors (optional)
92 DOUBLE E COMPANY, LLC Model: AP/SM1/P/(I)V3-4 AP/SM1/P/IO5 6 ø Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø ø Depth 3 ø13 Max. Load per Safety Chuck = 1619 lbs. (72 N) Standard Jaw Orientation Sensor (optional) 5 13 Open/Close Sensors (optional)
93 SAFETY CHUCKS Model: AP/SM1/P1/(I)V3-4 AP/SM1/P1/IO UNI Depth 3 ø Maximum Load per Safety Chuck = 1619 lbs. (72 N) Maximum Transmissable Torque** = 664 lbf-ft (9 Nm) ** Values shown for maximum ø and standard spindle length. 6 ø11 Max ø = 45 g6 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø Standard 3-4 ø 5 Open/Close Sensors (optional)
94 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø235 Standard 4-5 ø 55 Model: AP/SP1/F/(I)V4-5 AP/SP1/F/IO Depth 3 Max. Load per Safety Chuck = 3147 lbs. (14 N) ø175 ø15 ø1 f8 ø13 ø19 Jaw Orientation Sensor (optional) Open/Close Sensors (optional)
95 SAFETY CHUCKS Model: AP/SP1/F1/(I)V4-5 AP/SP1/F1/IO55 63 ø13 ø UNI 664 Depth Maximum Load per Safety Chuck = 3147 lbs. (14 N) Maximum Transmissable Torque** = 959 lbf-ft (13 Nm) ** Values shown for maximum ø and standard spindle length. ø15 Max ø = 45 g6 ø1 f8 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø235 4 ø175 Standard 4-5 ø 55 Open/Close Sensors (optional)
96 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø Standard 4-5 ø 55 Model: AP/SP1/P/(I)V4-5 AP/SP1/P/IO Depth 3 Max. Load per Safety Chuck = 3147 lbs. (14 N) 75 ø13 Jaw Orientation Sensor (optional) ø17 Open/Close Sensors (optional)
97 SAFETY CHUCKS 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) ø235 5 Model: AP/SP1/P1/(I)V4-5 AP/SP1/P1/IO UNI 664 Depth 3 ø Maximum Load per Safety Chuck = 3147 lbs. (14 N) Maximum Transmissable Torque** = 959 lbf-ft (13 Nm) ** Values shown for maximum ø and standard spindle length. 75 ø13 Max ø = 45 g Standard 4-5 ø 55 Open/Close Sensors (optional)
98 DOUBLE E COMPANY, LLC 98
99 SAFETY CHUCKS Boschert Equivalent Safety Chucks 99
100 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 19- ø 35 Model: B/SL1/F/(I)V19- B/SL1/F/IO Depth Max. Load per Safety Chuck = 45 lbs. (2 N) 66 ø92 ø75 f7 ø8.5 ø ø11 ø1 Standard
101 SAFETY CHUCKS Model: B/SL1/F1/(I)V19- B/SL1/F1/IO UNI 664 ø8.5 ø Depth Maximum Load per Safety Chuck = 45 lbs. (2 N) Maximum Transmissable Torque** = 88.5 lbf-ft (12 Nm) ** Values shown for maximum ø and standard spindle length. ø11 ø92 ø75 f7 Max ø = 19 k6 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø1 Standard ø 35 11
102 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com 22-3 ø 35 Model: B/SM1/F/(I)V22-3 B/SM1/F/IO Max. Load per Safety Chuck = 899 lbs. (4 N) 68 ø14 ø115 ø9 f7 ø11 ø17 ø167 Standard Depth
103 SAFETY CHUCKS Model: B/SM1/F1/(I)V22-3 B/SM1/F1/IO Depth 22 Max ø = 28 k6 ø9 f7 Maximum Load per Safety Chuck = 899 lbs. (4 N) Maximum Transmissable Torque** = 133 lbf-ft (18 Nm) ** Values shown for maximum ø and standard spindle length. ø14 ø115 ø11 ø Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø167 Standard 22-3 ø 35 4 UNI
104 DOUBLE E COMPANY, LLC 3-4 ø 5 Model: B/SP1/F/(I)V3-4 B/SP1/F/IO Max. Load per Safety Chuck = 1798 lbs. (8 N) 7 ø16 ø135 ø11 f7 ø19 ø13 ø167 Standard Depth
105 SAFETY CHUCKS Model: B/SP1/F1/(I)V3-4 B/SP1/F1/IO UNI Maximum Load per Safety Chuck = 1798 lbs. (8 N) Maximum Transmissable Torque** = 8 lbf-ft (35 Nm) ** Values shown for maximum ø and standard spindle length. ø16 ø135 Max ø = 35 k6 ø11 f7 ø19 ø13 ø167 Standard 3-4 ø 5 Depth
106 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø ø 55 Model: B/SPP1/F/(I)V4-5 B/SPP1/F/IO Depth Max. Load per Safety Chuck = 3147 lbs. (14 N) ø21 ø17 ø13 f7 ø ø18 Standard
107 SAFETY CHUCKS Model: B/SPP1/F1/(I)V4-5 B/SPP1/F1/IO55 73 Depth Maximum Load per Safety Chuck = 3147 lbs. (14 N) Maximum Transmissable Torque** = 811 lbf-ft (11 Nm) ** Values shown for maximum ø and standard spindle length. ø21 ø17 Max ø = 5 k6 ø13 f ø ø Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø197 Standard 4-5 ø 55 9 UNI
108 DOUBLE E COMPANY, LLC 18
109 SAFETY CHUCKS Sidelay Adjusted Boschert Equivalent Safety Chucks 19
110 DOUBLE E COMPANY, LLC 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø 35 Model: B/SM5/F2/(I)V22-35/C5 B/SM5/F2/IO35/C Depth Max. Load per Safety Chuck = 899 lbs. (4 N) M3 ø98 ø1 f7 ø11 ø17 ø ø1 Standard
111 SAFETY CHUCKS Model: B/SM5/F1/(I)V22-35/C5 B/SM5/F1/IO35/C5 4 UNI Depth Maximum Load per Safety Chuck = 899 lbs. (4 N) Maximum Transmissable Torque** = 133 lbf-ft (18 Nm) ** Values shown for maximum ø and standard spindle length. ø145 ø12 Max ø = 28 k6 ø98 ø1 f7 ø11 ø Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) doublee@doubleeusa.com ø167 Standard ø
112 DOUBLE E COMPANY, LLC 3-4 ø 5 Model: B/SP5/F2/(I)V3-4/C5 B/SP5/F2/IO5/C ø18 ø11 f7 ø13 ø19 Depth Max. Load per Safety Chuck = 1574 lbs. (7 N) ø1 M3 ø Standard
113 SAFETY CHUCKS Model: B/SP5/F1/(I)V3-4/C5 B/SP5/F1/IO5/C ø18 ø11 f Maximum Load per Safety Chuck = 1574 lbs. (7 N) Maximum Transmissable Torque** = 221 lbf-ft (3 Nm) ** Values shown for maximum ø and standard spindle length. Max ø = 42 k6 ø13 ø19 ø167 Standard 3-4 ø 5 7 UNI 664 Depth
114 DOUBLE E COMPANY, LLC 114
115 SAFETY CHUCKS Rotary Tables/ Movable Bases 115
116 DOUBLE E COMPANY, LLC Model: BS/P1/SM5/SM ø16 35 ST ANDARD CONFIGURATION
117 SAFETY CHUCKS Model: BS/P2/SM5/SM ø16 STANDARD CONFIGURATION 117
118 DOUBLE E COMPANY, LLC Model: BS/P1/SM5/SM ø REVERSE CONFIGURATION
119 SAFETY CHUCKS 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) Model: BS/P2/SM5/SM1 REVERSE CONFIGURATION ø
120 DOUBLE E COMPANY, LLC Model: BS/P1/SP5/SP STANDARD CONFIGURATION ø
121 SAFETY CHUCKS 319 Manley Street, West Bridgewater, MA 2379 USA Tel: (58) Fax: (58) Model: BS/P2/SP5/SP STANDARD CONFIGURATION ø
122 DOUBLE E COMPANY, LLC Model: BS/P1/SP5/SP /2-13 UNC CHCS recommended ø REVERSE CONFIGURATION
123 SAFETY CHUCKS Model: BS/P2/SP5/SP ø16 1/2-13 UNC CHCS recommended REVERSE CONFIGURATION 123
124 DOUBLE E COMPANY, LLC 124
DOUBLE E COMPANY, LLC
SAFETY CHUCKS Sliding design... no binding, easier to load, safer for operators, replaceable jaw inserts. Patented circular jaw insert DOUBLE E COMPANY, LLC Excellence in Engineering FLANGE MOUNT SLIDING
More informationCUSTOMIZED MODULAR ROLL STANDS
CUSTOMIZED MODULAR ROLL STANDS SOLUTION SERIES Complete, pre-configured solutions for custom modular roll stands, nip / pull roll stations and slitting stations retrofitted for existing machines or as
More informationDifferential Rewind Shafts
Differential Rewind Shafts More accurate tension control for light tension applications. Dynamically balanced central shaft. Suitable for cardboard and all types of plastic cores. Easier loading of cores
More informationBoston Gear LOR Series
Boston Gear LOR Series Trig-O-Matic Lite Overload Release Clutch Installation and Maintenance Instructions Doc. No. LOR Series Trig-O-Matic Lite www.bostongear.com LOR SERIES TRIG-O-MATIC LITE OVERLOAD
More informationModel 8. Power Wheel. Planetary Gear Drive
Model 8 Power Wheel Planetary Gear Drive CONTENTS Introduction 3 Model 8 Wheel Drives - Double Reduction 4-5 Model 8 Wheel Drives w/a2 Series Integral Parking Brake - Double Reduction 6-7 Model 8 Shaft
More informationTorque. Motor model R
MA series motors CHARACTERISTICS OF THE MA SERIES MOTORS (SAE Motor model Displacement Continuous max. speed (1 Intermittent max. speed (1 Max. flow absorbed Torque Torque at 350 bar (5100 psi Theoretical
More informationSolutions for All of Your Web Handling Needs DOUBLE E COMPANY
Solutions for All of Your Web Handling Needs DOUBLE E COMPANY Excellence in Engineering DF-2000 Torque-Activated Chucks Core Chucks PC-4000 Pneumatic / Mechanical Chucks Concentric expansion minimizes
More informationSafety Chuck CSB25P, CSB25F, CSB50P, CSB50F, CSB75P, CSB75F, CSB125P, CSB125F CSB150P, CSB150F, CSB175P, CSB175F
Web Control s Technical Data Sheet Safety Chuck CSB5P, CSB5F, CSB50P, CSB50F, CSB75P, CSB75F, CSB15P, CSB15F CSB150P, CSB150F, CSB175P, CSB175F Nexen's line of rugged safety chucks provide roll shaft support
More informationWinding solutions for all your web handling needs.
T I D L A N D W I N D I N G P R O D U C T S Winding solutions for all your web handling needs. T A B L E O F C O N T E N T S Introduction.................................... 2-3 Standard Air Shafts (Pad,
More informationHPS SERIES. Steam Joints DEUBLIN COMPANY Norman Drive, West Waukegan, IL USA Phone: 847/ Fax: 847/ Rev.
Steam Joints DEUBLIN COMPANY 2050 Norman Drive, West Waukegan, IL USA 60085-6747 Phone: 847/689-8600 Fax: 847/689-8690 Rev. 8/27/03 TABLE OF CONTENTS 1. HPS Series Steam Joint Product Data Sheet 2. HPS
More informationROLL-UP COVERS Special Products
SURE-SPRING (Patented) The P.E.I. Patented design known as SURE-SPRING represent the most advanced level of technical innovation in the field of roll-up covers. The spring mechanism design takes into account
More informationTIDLAND WINDING SOLUTIONS TIDLAND WINDING SOLUTIONS. Shafts, Chucks, and Accessories for Web Handling
TIDLAND WINDING SOLUTIONS TIDLAND WINDING SOLUTIONS Shafts, Chucks, and Accessories for Web Handling INTRODUCTION 1 The Tidland Advantage At Tidland, we understand that our customers competitive advantage
More informationGlide Screw. Combines the Features of a Linear Bearing and Screw in One Compact Package
Glide Combines the Features of a Linear Bearing and in One Compact Package Introduction What is a Glide? Part linear bearing, part lead screw; a combination of two favorites to create something better
More informationTPCA Power Clamps Catalog
TPCA Power Clamps Catalog Pneumatically Operated, Weld-Contamination Sealed, Heavy Duty Power Clamps > Degree of arm opening can be adjusted from -12 > One clamp for both dual or single arms > Uses TRILOK
More informationROTARY TABLE SELECTION GUIDE
ROTARY TABLE SELECTION GUIDE 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com KOMA PRECISION, Inc. corporate facility located in East Windsor,
More informationModel 6. Power Wheel. Planetary Gear Drive
Model 6 Power Wheel Planetary Gear Drive CONTENTS Introduction 3 Model 6 Wheel Drives - Single & Double Reduction 4-5 Model 6 Wheel Drives w/a2 Series Integral Parking Brake - Single & Double Reduction
More informationStraight Line Action Clamps
Straight Line Action Clamps Sizing and Application Chart Click Page # View N [lbf.] mm [inch] Series Page MC-SLA-# 0 to 1000 [0 to 225] 1000 to 2000 [225 to 450] 2000 to 3000 [450 to 675] 3000 to 5000
More informationPRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:
PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters
More informationSEALS Control fluid (and/or dust) interchange between two regions with a common boundary Fluid
SEALS Housing (Stationary) Fluid 1(p 1 ) Fluid 2 (p 2 ) Shaft (rotation or translation or stationary) Control fluid (and/or dust) interchange between two regions with a common boundary Liquid Fluid Gas
More informationFor securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]
Page 1 of 15 Wire terminal grips u All dimensions shown as IN [MM] For securing wire terminals, cables, connectors, and other samples for pull testing. ØA B C D G1001 0-0.125 [0-3.1] G1001-1 [1000] 0.29
More informationSpring Mount SAB30403 (Sold Separately)
1. System Components Spring Mount SAB30403 (Sold Separately) Cable (Sold Separately) 1. System Components: Blue Black To Customer's Control Sensing Area Sensor Power On LED Load On LED Monitor Monitor
More informationOKLADKA ROZDZIALU 2405-K
OKLADKA ROZDZIALU 0-K POWER CHUCKS AND HYDRAULIC CYLINDERS POWER CHUCKS AND HYDRAULIC CYLINDERS HARD TOP JAW ADAPTER PLATE DRAW NUT WEDGE NUT BODY T-NUT BISON s -, - and -jaw Power Chucks as well as our
More informationROTARY TABLES SERIE TC TECHNOLOGY THAT INSPIRES
ROTARY TABLES SERIE TC TECHNOLOGY THAT INSPIRES TC FIXED-STATION ROTARY INDEXING TABLES TC ROTARY INDEXING TABLE TC ROTARY INDEXING TABLE: RELIABILITY FOR A LIFETIME EXTENDED WARRANTY Using our rotary
More informationTAKE IT TO THE NEXEN LEVEL
TAKE IT TO THE NEXEN LEVEL INDUSTRIES SERVED Aerospace Automation Equipment Automotive Bottling CNC Machining Commercial Laundry Equipment Converting Conveying Food Processing Machine Tool Material Handling
More informationCarbon Fiber Air Shafts. Air Shafts. Core Chucks. Adapter chucks. Safety chucks. Bowed Rolls
Carbon Fiber Air Shafts Air Shafts Core Chucks Adapter chucks Safety chucks Bowed Rolls The Center of Superior Web Handling Since 1961 NimCor has pioneered web handling solutions with innovative air shafts,
More informationHopkinsons Fig 9052 VALVE ACTUATOR
Excellent Power & Industrial Solutions Standard Operating & Maintenance Instructions Hopkinsons Fig 9052 VALVE ACTUATOR CUT-AWAY OF FIG. 9052 GEAR BOX, WITH LIMIT SWITCH & VALVE POSITION INDICATOR HOP
More informationLOR Series Trig-O-Matic Lite Overload Release Clutch
LOR Series Trig-O-Matic Lite Overload Release Clutch P-3029-BG LOR Series Installation and Operation An Altra Industrial Motion Company Contents I. Introduction A. Operating Principle... 3 B. Torque Adjustment...
More informationROLL-UP COVERS Standard products
A ROLL-UP COVERS Standard products P.E.I. Roll-up Covers are normally equipped with our patented system of multiple springs. This offers countless advantages: Reliability Compact size Extremely high speeds
More informationSay hello to better web control.
Say hello to better web control. Montalvo has proven to be a smart investment in applications worldwide. Higher throughput and reduced waste mean that Montalvo products and services can bring to you an
More informationDescription and operating instructions. TOUCHDEX indexing tables
TOUCHDEX Automatic mechanical indexing tables Description and operating instructions Pag.. 3 TOUCHDEX indexing tables Pag.. 8 COMBIDEX Pag.. 12 TILTING Pag.. 13 MULTIDEX Pag.. 14 Accessories Pag.. On our
More informationOperation and Maintenance Manual Titespot Livetool Angle Heads Eltool Corporation
Operation and Maintenance Manual Titespot Livetool Angle Heads Eltool Corporation General The Eltool Livetool Angle Heads can provide years of service if properly used and maintained. The Livetool uses
More informationVRX Vane rotary actuator
VRX Vane rotary actuator Corrosion Resistant External Components MAXIMUM DURABILITY What You Expect from the pneumatic actuator Leader: Tolomatic offers a complete line of linear motion products. We offer
More informationBearings. Rolling-contact Bearings
Bearings A bearing is a mechanical element that limits relative motion to only the desired motion and at the same time it reduces the frictional resistance to the desired motion. Depending on the design
More informationMO Declutchable Manual Override Gearbox EL-O-Matic F-Series Actuators option
EFG.07.MO.EN, Page 1 of 2, Rev. 0 May 2018 MO Declutchable Manual Override Gearbox s option Light weight aluminum design and suitable for indoor and outdoor use. Easy operation. Suitable for quarter turn
More informationUSER S GUIDE AND MAINTENANCE MANUAL FOR DLB-2000 & DG-2000 LUG SHAFTS ENG
USER S GUIDE AND MAINTENANCE MANUAL FOR DLB-2000 & DG-2000 LUG SHAFTS ENG USER S GUIDE AND MAINTENANCE MANUAL FOR DG-2000 & DLB-2000 LUG SHAFTS Version 1.0 September 26, 2017 Copyright 2017 Double E Company,
More informationCLARKSON URETHANE KNIFE GATE VALVES FIGURE SU10R
CLARKSON URETHANE KNIFE GATE VALVES Installation and maintenance instructions for field replaceable urethane lined knife gate valves GENERAL INFORMATION The Clarkson SU10R knife gate valve offers bi-directional
More informationAbout Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
More informationINDEX. 414 Agitator reversing mechanism which varies point of reversal. 250 Alternate and intermittent drive for two shafts
INDEX Agitating device for pin hopper.----------------------------------------- 414 Agitator reversing mechanism which varies point of reversal. 250 Alternate and intermittent drive for two shafts.-----.----------.--..--
More informationROLL-UP COVERS. Special Product: SURE-SPRING.
Special Product: SURE-SPRING The P.E.I. Patented design known as SURE-SPRING represent the most advanced level of technical innovation in the field of roll-up covers. The spring mechanism design takes
More informationA pump is a machine used to move liquid through a piping system and to raise the pressure of the liquid.
What is a pump A pump is a machine used to move liquid through a piping system and to raise the pressure of the liquid. Why increase a liquid s pressure? Static elevation a liquid s pressure must be increased
More informationH Series. HECO Interchange Series Power Wheel. Planetary Gear Drive
H Series HECO Interchange Series Power Wheel Planetary Gear Drive CONTENTS Introduction 3 Auburn Gear, Inc. versus HECO - Gear and Bearing Ratings Comparison 4-5 Model 6 Center Flange Shaft Output Drives
More informationCHAMBER CUSTOMIZATION GUIDE TSE
Revision Date: May 6, 2011 Revision: 3 Page: 1 of10 CONTENTS Brake Chamber Clamp Repositioning Instructions...2-3 Mechanical Release of Spring Brakes (Caging)...4-6 Determine The Correct Push Rod Length...7-9
More informationPower Wheel Model 8 Series B Planetary Gear Drives AuburnGear.com
Power Wheel Model 8 Series B Planetary Gear Drives 260.92.30 AuburnGear.com SERIES B WHEEL DRIVES Model 8 Series B Features & A2 Integral Brake Information...3 Double Reduction...4 with A2 Series Integral
More informationChar-Lynn HP 30 Motor
Char-Lynn HP 30 Motor Displacements cm 3 /r (in 3 /r) 344 (21.0) 400 (24.4) 434 (26.5) 480 (29.3) 677 (41.3) Engineered for Performance For the past 45 years, Char-Lynn has been recognized as the industry
More informationHARMONIC GEARHEAD. Features & Benefits Specifications... 53
HARMOIC GEARHEAD exen s revolutionary (HG) is the perfect combination of size and precision. Use the integrated with exen s RPS Pinion (HGP) to create a true backlash-free solution from the motor to the
More informationHigh-Torque, Easy Speed & Stroke Control, Field Adaptable
D R I V I N G T H E I N D U S T R Y F O R W A R D High-Torque, Easy Speed & Stroke Control, Field Adaptable Fully Adjustable Stroke Length and Jaw Stop Positions Flow Controls Fitted as Standard Quick
More informationWrap Spring Clutches and Clutch/Brakes
A L T R A I N D U S T R I A L M O T I O N Wrap Spring Clutches and Clutch/Brakes Wrap Spring Product Line CB Series SCB Series WSC Series Clutch/Brake Package Each CB Series unit is a completely self-contained,
More informationFlex Finger Tooling 100/125 Series
Flex Finger Tooling 100/125 Series FLEX 100/125 Finger Tooling allows quick and easy changeover of tools between new die sets. Our modular components are simple to configure due to the ability to adjust
More informationPower Wheel Model 8 Planetary Gear Drives AuburnGear.com
Power Wheel Model 8 Planetary Gear Drives 260.92.30 AuburnGear.com MODEL 8 Features & A2 Integral Brake Information...3 MODEL 8 WHEEL DRIVES Double Reduction...4 with A2 Series Integral Parking Brake...6
More informationRotary Index Tables Typ TT
Rotary Index Tables Typ TT Going full-pitch for a good turn Passion for Automation this motto sums up our company philosophy and our overall approach toward business. Our broad product range forms the
More informationCONTROL VALVES. Installation, Maintenance & Operating Instructions. Read these instructions carefully before installation or servicing.
KOSO HAMMEL DAHL CONTROL VALVES KOSO HAMMEL DAHL 253 Pleasant Street West Bridgewater, MA 02379 tel: 774.517.5300 fax: 774.517.5230 www.hammeldahl.com Installation, Maintenance & Operating Instructions
More informationJuly 2018 ONLY FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory
More informationABB ACTUATORS & POSITIONERS
ABB ACTUATORS & POSITIONERS ABB INTELLIGENT POSITIONERS PositionMaster EDP300 - Digital Positioner Analog HART communication Universal analogue input Operation with air, optional with Graphical display
More informationGM25 Motor Dimensional Information
GM25 Series Birotational Hydraulic Motors GM25 Series hydraulic motors are designed for low noise, high efficiency birotational operation. Cast iron construction insures reliability and strength. A number
More informationROTARY MOTION CONTROL
ROTARY MOTION CONTROL Application & Selection Guide Features 2 Cross-Sectional Drawings 4 Dimensions 5 Specifications 6 Optional Valves 6 Industry 4.0 Sensors ZSE Zero Backlash, Spring Engaged Shaft Brake
More informationOPERATION AND PARTS MANUAL
OPERATION AND PARTS MANUAL MODEL NUMBER : PART NUMBER : GTL 1110 1900-0510 SERIAL NUMBER : BAYNE MACHINE WORKS, INC. PHONE: (864) 288-3877 910 FORK SHOALS ROAD TOLL FREE: (800) 535-2671 GREENVILLE S.C.,
More informationElectromagnetic clutch-brake combinations INTORQ
Electromagnetic clutch-brake combinations INTORQ 14.800 14.867 7.5 120 Nm setting the standard 2 CBC en 5/2005 Contents Clutch-brake combinations Product information 4 Type code 6 Design selection 8 Overview
More informationGuide units. For toolmaking, fixture manufacturing and machine engineering
Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar
More informationParallel Grippers- DPW DIRECTCONNECT Wide Body Series
DPW SERIES 1.196 Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DIRECTCONNECT Connectivity: DIRECTCONNECT Tapped and Dowel mounting on body. Large or Wide Parts: Wide body design provides secure
More informationDouble-acting, magnetic, guided ø 10x2, 16x2, 20x2, 25x2, 32x2 mm
CATALOGUE > Release 8.8 > Series QX twin rod cylinders Series QX twin cylinders Double-acting, magnetic, guided ø 0x2, 6x2, 20x2, 25x2, 32x2 mm High force Precise movement Integrated guide QXB: linear
More informationFor securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]
For securing wire terminals, cables, connectors, and other samples for pull testing. G1001 0-0.125 [0-3.1] G1001-1 0.29 [0.13] 3.40 [86.4] 0.125 - [3.1-6.3] 1.45 [36.8] G1001-2 - 0.375 [6.3-9.5] Includes
More informationROTARY MOTION CONTROL
ROTARY MOTION ONTROL Technical Data Sheet Mechanical Torque Limiter The trend in industry is to design and incorporate more automation into production processes. Machines are becoming more accurate, requiring
More informationROSTA MOTORBASES ROSTA. Self-Tensioning Motor Mount for Belt Drives. without slippage self-adjusting maintenance-free
MOTORBASES Self-Tensioning Motor Mount for Belt Drives without slippage self-adjusting maintenance-free Technology Tensioning Motorbase Type MB for Belt Drives The elastic tensioning motorbase type MB,
More informationPower Chucks B & BT Series
Power Chucks B & BT Series B Series Three-jaw and two-jaw wedge style power chucks are ideal for high speed chucking, bar chucking and universal machining. These deliver consistent accuracy and repetitive
More informationSKF Mudblock cassette seals. A new generation of radial shaft sealing units for off-highway, oil-lubricated applications
SKF Mudblock cassette seals A new generation of radial shaft sealing units for off-highway, oil-lubricated applications SKF Mudblock seals provide excellent oil retention to minimize environmental impact.
More informationalpha Value Line Individual Talents Efficient Flexible Reliable
alpha Value Line Individual Talents Efficient Flexible Reliable WITTENSTEIN alpha adapted for any axis The perfect drive solution for every requirement WITTENSTEIN alpha develops complete, single-supplier
More informationADVANCED. Grips & Attachments.
www.worldoftest.com/gaugegrips.htm Qualitest grips and attachments are integral components of testing systems, designed for a wide range of tension, compression, and torque applications. These grips and
More informationI.T ODT-N * series 50 MODULAR DRIVEN TOOL DEVICE FOR AXIAL SYSTEM DIN 1809 COUPLING TECHNICAL INFORMATION ISSUED
series 50 MODULAR DRIVEN TOOL DEVICE FOR AXIAL SYSTEM DIN 1809 COUPLING TECHNICAL INFORMATION I.T. 6482 GB The data given in the I.T. are subject to technical modifications without notice. ISSUED 06-09
More informationHydra ulic po A single leftl' hydraulic - ' chuck and
"" These two. basically diflt will, each in its fjw1j ra with minimum operator The No. 7 is the larg~ ram type turret lathe b. any cabinet leg, is 5501 wall bed with deep Jxll walls, forms an e:rceedi.
More informationSafety - Installation and Operation:
4x4 or 4x2 Instructions EZGO Electric Cars Thank you for purchasing your 4x4 or 4x2 conversion kit. Safety at all times whether during installation or operation is utmost importance. Before After!!!!!!!!!!!!!!
More informationCarbon Fiber Air Shafts. Custom Carbon Fiber Tubes
Carbon Fiber Air Shafts Lightweight composite air shafts... with custom performance by design. NimCor offers an outstanding line of precision engineered carbon fiber shafts with unique performance features.
More informationMachine Tool Grade Ball Screw Linear Actuators
Machine Tool Grade Ball crew Linear Actuators High Precision With Force To 15,000 LBf Rugged teel Construction Designed For High ystem tiffness Flexible Design To uit Any Motor Protected From Contamination
More informationComparison Chart. extremely difficult. Finally, separated components can rarely be re-used.
JAN 2014 Traditional Connections Why Go Keyless Keyed Bushing Systems Both QD and Taper-Lock bushing and weld-on hub systems are popular component mounting technologies. Yet both are ultimately keyed connections
More informationcost-effective automation
cost-effective automation compact units for drilling tapping milling www.e2systems.com AIR HYDRAULIC DRILLING UNIT BE(FP)22 AIR HYDRAULIC DRILLING UNIT BE(F) 22 The basic design of the BE(F) 22 consists
More informationPC-Series Precision Linear Actuators. Optimize Your Machine and Save Energy With Reliable, High Performance, Compact Actuators
PC-Series Precision Linear Actuators Optimize Your Machine and Save Energy With Reliable, High Performance, Compact Actuators Make the Change to Electric Enjoy superior performance and save time and energy
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationRetrofit Instructions for Replacing an In-Tube Motor from within a Face Mount Shaver Door
Retrofit Instructions for Replacing an In-Tube Motor from within a Face Mount Shaver Door 1. Remove all Garage Door Style rollers from the curtain door s pultrusion tubes. This will be most easily done
More informationSeries 1 shaft seal installation instructions
Contents INTRODUCTION.... 3 SEL REPLCEMENT PROCEDURE Dust seal removal.... 3 Shaft seal access.... 3 Shaft seal removal.... 3 Verify correct bullet for drive shaft... 4 Replacement shaft seal installation....
More informationInstallation and Maintenance Instructions Falk Wrapflex (Page 1 of 7) 1. General Information. 2. Safety and Advice Hints DANGER! Type 10R.
(Page 1 of 7) This is the Original Document in English Language Type 10R Type 31R Type 35R Figure 1 - Wrapflex coupling range 1. General Information 1.1. Falk Wrapflex Couplings are designed to provide
More informationThe CSF-mini series now includes Ultra Flat models with High-Moment Stiffness
New Product News Vol. 22 Toll Free Speed Phone (877) SERVO98 Sensor Toll Reducer Free Fax (877) SERV99 Controller Motor Other System Elements Driver The CSF-mini series now includes Ultra Flat models with
More informationUGR A compact slide rail with a large permissible load.
Utility Slide UGR A compact slide rail with a large permissible load. It can easily be installed, and is optimal for linear motion guides of household and offi ce equipments. TOKYO. JAPAN CATALOG No.C-02E
More informationVickers 45. VMQ Series 30 Vane Pumps. Fixed Displacement, For Industrial and Mobile Applications (4.188)
[ (4.188) 49,4 (1.94) /21,8 /.86) 174,7/172,3 (6.88/6.78) 332,9/33,5 (13.11/13.1) "M" is marked if metric port threads No marking if inch port threads AS-568-152 O-ring Vickers 45 65,3 (2.57) 13 (5.1 VMQ
More informationENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m
ENGINEERING DATA High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series Interchangeable with: Charlynn White Ross Parker Danfoss w w w. INDEX Cross Reference Guide...2 Introduction...3 H-Series...4
More informationStepper Motor Linear Actuators
Stepper Motor Linear Actuators Pre-engineered lead screw assemblies and actuators for precision applications www.thomsonlinear.com Stepper Motor Linear Actuator Assemblies Combining cutting-edge motor
More informationMULTITURRET BAR TURNING B436Y2
MULTITURRET BAR TURNING B436Y2 B436Y2 The range of QUATTRO machines have been produced by Biglia since 1990 and celebrating the third generation is now further enhanced by the B436Y2 model. This new model
More informationI.T MDT * series 20 MODULAR DRIVEN TOOL DEVICE FOR AXIAL SYSTEM DIN 5480 / 5482 COUPLING TECHNICAL INFORMATION ISSUED
series 2 MODULAR DRIVEN TOOL DEVICE FOR AXIAL SYSTEM DIN 548 / 5482 COUPLING TECHNICAL INFORMATION I.T. 6486 GB The data given in the I.T. are subject to technical modifications without notice. ISSUED
More informationPOSITIVE DISPLACEMENT BLOWERS & VACUUM PUMPS. HeliFlow Industrial Series
POSITIVE DISPLACEMENT LOWERS & VACUUM PUMPS HeliFlow Industrial Series It's all about... the HeliFlow The HeliFlow Series integrates proven experience with blower design and manufacturing techniques to
More informationROTARY TELESCOPIC TRANSFER ARM
Section ROTARY TELESCOPIC TRANSFER ARM Introduction to 078 2-Axis 082 3-Axis 084 76 77 Radial Distribution Chamber Solutions Rotary Telescopic Transfer Arm THE ENABLES YOU TO: 1. Reach further Radial systems
More informationJuly 2018 ONLY FOR LT2000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LT2000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory
More informationPIglide RM Rotation Stage with Air Bearings
PIglide RM Rotation Stage with Air Bearings Friction-Free, Ideal for Indexing, Positioning, Scanning, Measuring Technology A-62x Cleanroom compatible Motion platform diameter from 50 mm to 300 mm Load
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationB50D HYDRAULIC PUMP ALIGNMENT PROCEDURE
B50D HYDRAULIC PUMP ALIGNMENT PROCEDURE Machine NEW MACHINES EX-FACTORY WITH THIS CHANGE: DATE VIN Part Manuals Affected B50D AH500D INTERCHANGEABILITY (ICA) YES = New and Old parts are interchangeable
More informationMEMORY SEAL BALL VALVES MAINTENANCE MANUAL 2 12, Class 150 & 300, Regular Port, Flanged Unibody
MEMORY SEAL BALL VALVES MAINTENANCE MANUAL 2 12, Class 150 & 300, Regular Port, Flanged Unibody I INTRODUCTION These rugged, versatile, high performance, regular port, ball valves meet all requirements
More informationFor securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]
For securing wire terminals, cables, connectors, and other samples for pull testing. G1001 0-0.125 [0-3.1] G1001-1 [1000] 0.29 [0.13] 3.40 [86.4] 0.125 - [3.1-6.3] 1.45 [36.8] G1001-2 - 0.375 [6.3-9.5]
More informationWalk Greens Mowers. Fewer steps to a perfect green.
Walk Greens Mowers Fewer steps to a perfect green. You steered us in the right direction, and then we kept going. With our new SL PrecisionCut Walk Greens Mowers, we ve kept all the great features you
More informationCenterLine Filter Wheel
Engineering Excellence Because Your Image Depends On It User s Guide CenterLine Filter Wheel Finger Lakes Instrumentation, LLC September 2014 WELCOME Thank you for purchasing an FLI CenterLine Filter Wheel.
More informationFlexGun Welding Guns. Ver. 1.5
FlexGun Welding Guns Ver. 1.5 FlexGun - The Standard for Welding Excellence Resistance welding gun technology has advanced considerably since the introduction of transformer weld gun packages. As a pioneer
More informationRING-flex. Torsionally Rigid Disc Couplings US Partner for performance 1. RINGFEDER Products are available from MARYLAND METRICS
RINGFEDER Products are available from MARYLAND METRICS RING-flex Torsionally Rigid Disc Couplings US 008 Partner for performance RINGFEDER Products are available from MARYLAND METRICS P.O. Box 6 Owings
More informationmechanics RDH-M Indexing Table/Rotary Axis B 210 RDH-S Indexing Table/Rotary Axis B 212 RF 1 Indexing Table B 214 D 1 Indexing Table B 216
Overview RDH-M Indexing Table/Rotary Axis B 210 RDH-S Indexing Table/Rotary Axis B 212 RF 1 Indexing Table B 214 D 1 Indexing Table B 216 D 2 Indexing Table B 218 MD 1 Midget Rotary Axis B 220 ZR 20 Indexing
More informationfailure, or a reduced service life of the wiring system.
digital TOrquE TOOl Torque Range: In-Lb = 15 ~ 300 In-Lb FT Lb = 1.25 ~ 25 FT Lb Kg-cm = 1.7 ~ 345 Kg-cm N m = 1.7 ~ 33N.M Higher Torque ratings to meet mechanical fastening requirements and the need for
More information