Motors LV Product Lines African. Motors Energy Automation Coatings

Transcription

1 Motors LV Product Lines African Motors Enery Automation Coatins

2 W21 - Multivoltae Cast Iron Frame Motor Three phase asynchronous motor, with lower acquisition cost and hih technoloy. Easy to adapt to the most application types, allowin to your company aility durin installation, easy operation and low maintenance cost. The project is accordin to IEC34 standards, which uarantees hiher enery savins. The followin types of W21 motors are available: Standard Efficiency (EFF2), Premium Efficiency (EFF1) and Top Premium Efficiency (Exceeds EFF1) and suitable for the use with Frequency Inverters. Motor Output: 0,12 up to 330kW Poles: II, IV, VI and VIII Frame: 63 up to 355 M/L Three-phase multivoltae, IP55, TEFC, 50Hz Pumps, fans, crusher, conveyors, machine tools, millin machines, centrifual machines, presses, elevators, looms, rinders, woodworkin, coolin, packain equipment, other severe duty application. * Notes: WISE System Efficiency Paintin Plan for Industrial Environments Cast Iron Frames State-of-the-art Ventilation System Increase the electrical strenth of the stator, allowin the motor to operate with frequency inverters, without damain by the voltae peaks*. Premium Efficiency (EFF1) and Top Premium Efficiency (Exceeds EFF1) motors, uarantee a fast return of investment. Suitable for the use in slihtly severe and sheltered environments, with low averae humidity, reular temperature variations. More strenth for your application Uniform refrieration of the motor with sinificant temperature reduction in the external surface and bearins, uarantee hih performance and enery savin to your application. Product suitable to meet the most demanded applications in the industry. * Notes: Technical criteria for use of motors fed by inverters Motor rated Voltae V NOM 460V 460V < V NOM 575V System Standard Reinforced Voltae peak in the motor 1430V 1780V dv/dt Inverter outlet 5200 V/µs 6500 V/µs Rise Time(*) Of Inverter MTBP(*) Time between pulses 0,1 µs 6 µs Motors Product Lines

3 W21 - Multimountin Aluminum frame motors WEG Aluminum frame motors with removable base were specially desined to meet market requirements in reference to mountin flexibility once they allow all mountin positions. The foot mountin system offers reat flexibility and it quite simply allows chanin on the mountin confiuration without requirin any machinin or modification on the motor feet. Motor terminal box can be rotated at 90 derees allowin motor leads to be connected on any motor side. Besides that, these motors are fully interchaneable with existin cast iron frame motors. Stock flexibility due to the fact that just one motor is required with mountin possibility on all positions. Aluminum version of W21 line. VFD Output: 0,12 up to 11kW Poles: II, IV, VI and VIII Frames: 63 up to 132 M Three-phase multivoltae, IP55, TEFC, 50Hz Pumps, air conditionin systems, fans, cranes, compressors, conveyor belts, machine tools, windin machines, drawin machines, centrifuals, presses, hoists, overhead cranes, elevators, looms, rinders, woodworkin, injectors, extruders, roller tables, coolin towers, packain machines, etc. Multimountin Aluminum Frame WISE system Efficiency Paintin Plan for Industrial Environments State-of-the-art Ventilation System Flexible and easy to chane mountin confiurations without the necessity of machinin operations or additional chanes to the motor feet. Better thermal dissipation Increase the electrical strenth of the stator, allowin the motor to operate with frequency inverters, without damain by the voltae peaks*. Premium Efficiency (EFF1) and Top Premium Efficiency (Exceeds EFF1) motors, uarantee a fast return of investment. Suitable for the use in slihtly severe and sheltered environments, with low averae humidity, reular temperature variations. Uniform refrieration of the motor with sinificant temperature reduction in the external surface and bearins, uarantee hih performance and enery savin to your application. Product suitable to meet the most demanded applications in the industry. * Notes: Technical criteria for use of motors fed by inverters Motor rated Voltae V NOM 460V 460V < V NOM 575V System Standard Reinforced Voltae peak in the motor 1430V 1780V dv/dt Inverter outlet 5200 V/µs 6500 V/µs Rise Time(*) Of Inverter MTBP(*) Time between pulses 0,1 µs 6 µs Motors Product Lines 3

4 Fan and Exhaust Motor suitable to the most demanded specifications of the OEM s ventilation customers. Can be supplied in versions: Pad, Foot or Flane mounted. Besides the mountin confiurations the motor can be also supplied with T-box and terminal block or without T-box and 1 meter of cable leads allowin remote assembly of the T-box. Motor Output: 0,12 up to 315kW Poles: II, IV, VI, VIII and two speed Frame: 63 up to 22 5 S/M PAD/FOOT and above only foot Three-phase multivoltae, IP55, 50Hz Totally Enclosed Fan Cooled (TEFC) or Totally Enclosed Air Over (TEAO) Fan and exhausters, tunnels, fan and exhaust systems in buildins, theaters, movie theaters and industries, subways, air conditionin systems, underround coal mines, shoppin centers, supermarkets and others. WISE System Efficiency Paintin Plan for Industrial Environments Increase the electrical strenth of the stator, allowin the motor to operate with frequency inverters, without damain by the voltae peaks. Premium Efficiency (EFF1) and Top Premium Efficiency (Exceeds EFF1) motors, uarantee a fast return of investment. Suitable for the use in slihtly severe and sheltered environments, with low averae humidity, reular temperature variations. Product suitable to meet the most demanded applications in the industry. 4 Motors Product Lines

5 Smoke Extraction Assure safety where a lare concentration of people in commercial and industrial facilities is present is one of the main concerns of desiners and company owners durin the project of shoppin centers, factories, warehouses, covered parkin lots, tunnels and other places which concentrate a lare number of people. The Smoke motors are certified* for hih temperatures and uarantee a rapid smoke and heat extraction and delay in fire propaation, allowin free access to the emerency exits. Lare buildins, shoppin malls, factories, warehouses, enclosed parkin lots, other ventilation systems. Duty Certification F200 F300 F400 S1-40 C S1 40ºC S1 40ºC S2* C - 2 hours S2* - 300ºC 1 hour S2* - 400ºC 2 hours Self Declaration BSRIA - U.K. Frames: 80 to 250 Also available certification for 300 C/2 hours BSRIA - U.K. Frames: 80 to 180 Outputs: 0.75kW 27kW CTICM - France Frames: 90 to 280 Pole:IV, VI, VIII, VI/IV, VIII/IV, VIII/VI poles Class Ins. Class F; Temp. Rise 80K Ins. Class H; Temp. Rise 80K or 105K Standard EN Pole / Frame sizes available II, IV/II pole (frame sizes 80 up to 315S/M) IV, VI, VIII, VIII/IV, VI/IV pole (frame sizes 80 up to 355M/L) Construction Totally Enclosed Fan Cooled (TEFC) or Totally Enclosed Air Over (TEAO) (foot or flane mounted / pad mounted for frame sizes 80 up to 250) * Continuously rated for normal ambient and emerency duty at rated temperature and time. WISE System Paintin Plan for Industrial Environments Cast Iron Frame State-of-the-art Ventilation System Increase the electrical strenth of the stator, allowin the motor to operate with frequency inverters, without damain by the voltae peaks. Suitable for the use in slihtly severe and sheltered environments, with low averae humidity, reular temperature variations. More strenth for your application Uniform refrieration of the motor with sinificant temperature reduction in the external surface and bearins, uarantee hih performance and enery savin to your application. Product suitable to meet the most demanded applications in the industry. Motors Product Lines 5

6 Ex d The instalation of electric motors where flamable products are continuously handled, processed or storae, must comply with the most demanded safety standards in order to uarantee protection of life, machines and environment. Followin to the hihest safety standards WEG explosion proof motors are made of robust construction, modern system of flame retention with joint parts carefully desined, precision machinin in the T-box eliminatin imperfections in the joint parts and fixation with hih mechanical strenh bolts. Motor Output: 0,37 up to 315kW Poles: II, IV, VI, VIII and two speed Frame: 90S/L up to 355 M/L Three-phase multivoltae, IP55, TEFC, 50Hz Pumps, fans, crushers, conveyors, machine tools, millin machines, centrifual machines, presses, elevators, looms, rinders, woodworkin, coolin, packain equipment, other severe duty applications. Feature Modern flame retention system with robust frame, end shields and T-box. Certification for the use with frequency inverters T4 Additional nameplate for the use with frequency inverters. Efficiency Paintin Plan for Severe Environments Avoid flame propaation from inside the motor to the external side, uaranteein safety protection to the life, machines and environment. Guarantee in speed variation applications and hazardous areas such as Zone 1 and Zone 2, accordin to CESI certification. Easy identification of the conditions of operation temperature (speed and torque rane) Premium Efficiency (EFF1) motors, uarantee a fast return of investment. Special for industrial severe environments, sheltered or not, which may contain SO2, steam, solid contaminants and hih humidity. Product suitable to meet the most demanded applications in the industry. * Notes: Motor rated Voltae V NOM 460V 460V < V NOM 575V System Standard Reinforced Voltae peak in the motor 1430V 1780V Technical criteria for the use of motors fed by inverters dv/dt Inverter outlet 5200 V/µs 6500 V/µs Rise Time(*) Of Inverter MTBP(*) Time between pulses 0,1 µs 6 µs Classification: IEC Standard CENELEC Standard Zone 1; Group IIB Group IIB; Cateory 2 The classification in Zone 1 means that the motor is suitable to operate also in Zone 2 once Zone 1 represents an operatin condition worse than Zone 2. The same applies to Groups and Cateories: Ex d and Ex de motors are suitable to operate also in Group IIA and Cateory 3. Certification: In Europe, WEG explosion proof motors meet ATEX Directive 94/9/EC certified by PTB and product certified by CESI Centro Elettrotecnico Sperimentale Italiano S.P.A. The CESI certificates of conformity for explosion proof in flameproof enclosure d and de as per EN50014 / EN50018 are: Ex d Explosion proof motors (class of temperature T4) Ex de Explosion proof motors with increased safety terminal box (class of temperature T4) 6 Motors Product Lines

7 Brake motor In order to have a company workin with hih performance it is necessary to have equipments workin accordin to its needs. WEG brake motor is perfect to equipments where fast safety stops are required, positionin and time savin. WEG brakin solutions allows synery in the production process, helpin with aility and safety. WEG brake motors are available in versions: Standard Efficiency (EFF2), Premium Efficiency (EFF1) and Top Premium Efficiency (Exceeds EFF1) and they are suitable for the use with frequency inverters*. Motor Output: 0,12 up to 37kW Poles: II, IV, VI and VIII Frame: 63 up to 200L Three-phase multivoltae, IP55, TEFC, 50Hz Cast Iron Frame or Aluminum Frame These motors can be used on any machine that requires quick stops and time savins durin installation: machine tools, looms, packin machines, ates, wood machines, cranes, other severe duty applications. Hih performance brakin system Manual brake release WISE System Efficiency Paintin Plan for Industrial Environments State-of-the-art Ventilation System Guarantee precision brakin, fast and safe with easy maintenance. Possibility to keep the motor free durin emerency situations or whenever necessary. Increase the electrical strenth of the stator, allowin the motor to operate with frequency inverters, without damain by the voltae peaks*. Premium Efficiency (EFF1) and Top Premium Efficiency (Exceeds EFF1) motors, uarantee a fast return of investment. Suitable for the use in slihtly severe and sheltered environments, with low averae humidity, reular temperature variations. Uniform refrieration of the motor with sinificant temperature reduction in the external surface and bearins, uarantee hih performance and economy to your application. Product suitable to meet the most demanded applications in the industry. * Notes: Technical criteria for use of motors fed by inverters Motor rated Voltae V NOM 460V 460V < V NOM 575V System Standard Reinforced Voltae peak in the motor 1430V 1780V dv/dt Inverter outlet 5200 V/µs 6500 V/µs Rise Time(*) Of Inverter MTBP(*) Time between pulses 0,1 µs 6 µs Motors Product Lines 7

8 Sinle Phase Aluminum These motors have a wide rane of applications. Because of their hih startin torque, they are particularly well-suited for heavy startin loads. Motor Output: 0.12 up to 9.2kW Poles: II and IV. Frames: 71 up to 132M Paintin: Ral 5007 (Blue) Pumps, central air conditionin, fans, crushers, pulleys, compressors, continuous conveyors, machine tools, windin machines, mills, centrifual machines, presses, cranes, overhead cranes, overhead cranes, oil wells, elevators, looms, rinders, wood cuttin machines, injectors, extruders, car traction, rollin tables, coolin towers, packin machines. V-rin Seals Exclusive WISE System To provide the best possible protection in dusty and hih moisture environments. Increase the electrical strenth of the stator, allowin the motor to operate with frequency inverters, without damain by the voltae peaks. Motors Product Lines

9 Three Phase ODP The Open Drip Proof motors are desined for environments where dirt and moisture are minimal and provide maximum ventilation and heat dissipation. Motor Output: 11 up to 220kW Poles: II, and IV Frames: 160M up to 280S/M Paintin: RAL 5007 Pumps, industrial equipments, blowers, compressors, machinery. Exclusive WISE System Increase the electrical strenth of the stator, allowin the motor to operate with frequency inverters, without damain by the voltae peaks. Motors Product Lines 9

10 Saw Arbor Sinle and double shaft ends available, these motors are suitable for a wide rane of applications such as circular saws, pendulum saws, polishin machines and others. Motors are all cast iron and have service factor 1.0. they can replace conventional circular saw drive systems. Motor Output: 2,2 up to 5,5kW Poles: II and IV. Frames: 80S-MS up to 90L-MS Paintin: Ral 5007 (Blue) Band saw, flywheel saw, flywheel disc, abrasive cuttin and metal polishin disc, top ede cuttin disc, rindin, wood millin machine. Product special develop for saw arbor application with extra features. 10 Motors Product Lines

11 W21 Nema These TEFC motors are built accordin NEMA specifications and desined for operation in moist or dusty atmospheric conditions without affectin their useful life. Motor Output: 1 up to 500kW Poles: II, IV, VI and VIII Frames: 143T up to 586/7 Paintin: Syntetic enamel alkyd resin base Pumps, fans, kneader and mixer machines, cuttin and sawin machines, pressin machines, industrial equipment, conveyors, blowers, compressors, machinery, cranes and packain equipment. V-rin Seals Exclusive WISE System To provide the best possible protection in dusty and hih moisture environments. Increase the electrical strenth of the stator, allowin the motor to operate with frequency inverters, without damain by the voltae peaks. Motors Product Lines 11

12 WEG Worldwide Operations ARGENTINA WEG EQUIPAMIENTOS ELECTRICOS S.A. (Headquarters San Francisco-Cordoba) So. Pampilione 4849 Parque Industrial San Francisco San Francisco Phone(s): +54 (3564) Fax: +54 (3564) info-ar@we.net AUSTRALIA WEG AUSTRALIA PTY. LTD. 3 Dalmore Drive Carribean Park Industrial Estate Scoresby VIC Melbourne Phone(s): 61 (3) Fax: 61 (3) info-au@we.net BELGIUM WEG BENELUX S.A. Rue de l Industrie 30 D, 1400 Nivelles Phone(s): + 32 (67) Fax: + 32 (67) info-be@we.net CHILE WEG CHILE S.A. Los Canteros 8600 La Reina - Santiao Phone(s): (56-2) Fax: (56-2) info-cl@we.net CHINA WEG (NANTONG) ELECTRIC MOTOR MANUFACTURING Co., Ltd. No Xinkai Nan Road, Nanton Economic and Technoloical Development Area Jiansu Province, China PC Phone(s): Fax: info-cn@we.net COLOMBIA WEG COLOMBIA LTDA Calle 46A N82-54 Portería II - Bodea 7 - San Cayetano II - Bootá Phone(s): (57 1) Fax: (57 1) info-co@we.net FRANCE WEG FRANCE SAS ZI de Chenes Le Loup 13 Rue du Morellon BP Saint Quentin Fallavier Phone(s): +33 (0) Fax: +33 (0) info-fr@we.net GERMANY WEG GERMANY GmbH Alfred-Nobel-Str. 7-9 D Frechen Phone(s): +49 (2234) Fax: +49 (2234) info-de@we.net INDIA WEG Electric (India) Pvt. Ltd. #38, Ground Floor, 1st Main Road, Lower Palace Orchards, Banalore Phone(s): Fax: info-in@we.net ITALY WEG ITALIA S.R.L. V.le Brianza Cinisello Balsamo - Milano Phone(s): (39) Fax: (39) info-it@we.net JAPAN WEG ELECTRIC MOTORS JAPAN CO., LTD. Matsumoto Bld. 2F, Kamata, Ohta-ku, Tokyo, Japan Phone(s): (81) Fax: (81) info-jp@we.net MEXICO WEG MEXICO, S.A. DE C.V. Carretera Jorobas-Tula Km. 3.5, Manzana 5, Lote 1 Fraccionamiento Parque Industrial - Huehuetoca, Estado de México - C.P Phone(s): + 52 (55) Fax: + 52 (55) info-mx@we.net NETHERLANDS WEG NETHERLANDS Sales Office of WEG Benelux S.A. Keulenstraat 4E 7418 ET Deventer Phone(s): +31 (0) Fax: +31 (0) info-nl@we.net PORTUGAL WEG EURO - INDÚSTRIA ELÉCTRICA, S.A. Rua En. Frederico Ulrich Apartado Maia Phone(s): Fax: info-pt@we.net RUSSIA WEG RUSSIA Pochainskaya Str. 17 Nizhny Novorod Russia Phone(s): Fax: info-ru@we.net SPAIN WEG IBERIA S.L. Avenida de la Industria, Coslada - Madrid Phone(s) : (34) Fax : (34) info-es@we.net SINGAPORE WEG SINGAPORE PTE LTD 159, Kampon Ampat, #06-02A KA PLACE. Sinapore Phone(s): Fax: info-s@we.net SWEDEN WEG SCANDINAVIA AB Box Verkstadatan Kunsbacka Phone(s): (46) Fax: (46) info-se@we.net UK WEG ELECTRIC MOTORS (U.K.) LTD. 28/29 Walkers Road Manorside Industrial Estate North Moons Moat - Redditch Worcestershire B98 9HE Phone(s): 44 (0) Fax: 44 (0) info-uk@we.net UNITED ARAB EMIRATES WEG MIDDLE EAST FZE JAFZA JEBEL ALI FREE ZONE Tower 18, 19th Floor, Office LB Dubai United Arab Emirates info-ae@we.net USA WEG ELECTRIC CORPORATION 1327 Northbrook Parkway, Suite 490 Suwanee Phone(s): Fax: info-us@we.net VENEZUELA WEG INDUSTRIAS VENEZUELA C.A. Parcela T-4-A Transversal 9 Urb. Industrial Carabobo Catastral Edf. ELIMECA Loc. ELIMECA, Zona Postal 2003, Valencia, Edo. Carabobo Phone(s): (58) Fax: (58) info-ve@we.net WEG Equipamentos Elétricos S.A. International Division Av. Prefeito Waldemar Grubba, Jarauá do Sul - SC - Brazil Phone: 55 (47) Fax: 55 (47) / The values shown are subject to chane without prior notice. The information is for reference only.