24 LED SOLAR CAMPING LANTERN

Transcription

1 24 LED SOLAR CAMPING LANTERN OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item #23870

2 Thank you very much for choosing an NPower. product! For future reference, please complete the owner s record below: Model: Purchase Date: Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This machine is designed for certain applications only. Northern Tool + Equipment cannot be responsible for issues arising from modification. We strongly recommend this machine is not modified and/or used for any application other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the machine until you have first contacted Northern Tool + Equipment to determine if it can or should be performed on the product. For technical questions please call INTENDED USE The Solar Camping Lantern is designed for recreational and household activities, emergencies, and medical work. TECHNICAL SPECIFICATIONS & PACKING LIST Item Description Battery 6V, 4Ah Rechargeable Battery Light Source 24 Super Bright LEDs Solar Panel 6V 1 Watt Charging Time 8 Hours (Full Sunlight) GENERAL SAFETY RULES WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. SAVE THESE INSTRUCTIONS PERSONAL SAFETY Do not immerse this product in water or other liquid. Do not put this product close to open flame. Disconnect this product or remove its batteries before cleaning. Page 2 of 5

3 TOOL USE AND CARE Disconnect the power from the lantern and place the switch in the locked or off position before servicing, adjusting, installing accessories or attachments, or storing. Such preventive safety measures reduce the risk of accidental starting. NOTE: The lantern needs to charge in full sunlight for 8 hours to allow the rechargeable batteries to reach maximum capacity. If LEDs do not light, wipe both ends of the batteries with a clean and dry cloth. OPERATION 1. To recharge the batteries with solar power, turn the panel to face the sunlight. Charging time about 8 hours (full sunlight). 2. Simply push the switch to turn on. 3. Use the handle to carry or hang the solar lantern. MAINTENANCE WARNING: Make sure this lantern is disconnected from its power source before attempting any maintenance, cleaning, or inspection. CLEANING Use only soap and a damp cloth to clean your solar lantern. Many household cleaners are harmful to plastics and other insulation. Never let liquid get inside a lantern. Page 3 of 5

4 DIAGRAM & PARTS LIST Page 4 of 5

5 Part# Description Qty Part# Description Qty 1 Hook 1 25 Screw 1 2 Handle 1 26 LED Panel 1 3 Screw 1 27 LED Fixed Stand (right) 1 4 Knob 1 28 LED Panel Transparent Covers 1 5 White Pads 1 29 Conductive Bar 1 6 Top Cover 1 30 Cover 1 7 Contact Part Fixer 1 31 Nuts 1 8 Red Cap 1 32 Metal Mesh Cover 1 9 Contact Part 1 33 Metal Bottom 1 10 Screw 1 34 Reflective Clip 1 11 Remote Control Receiver Board 1 35 Anti-Water Plug 1 12 Nuts 1 36 Screw 1 13 Contact Part of Receiver Board 1 37 Bottom Shell 1 14 Screw 1 38 Anti-Water Plug 1 15 Link 1 39 Charge Plate 1 16 Link 1 40 Nuts 1 17 Metal Top Cover 1 41 Screw 1 18 Handle Bolt 1 42 Screw 1 19 Top Cover 1 43 PCB Board 1 20 Handle Bolt 1 44 Battery 1 21 Nuts 1 45 Bottom Shell 1 22 LED Fixed Plate V Power Plug 1 23 Bolt 1 47 Charger 1 24 LED Fixed Stand (left) 1 1 For replacement parts and technical questions, please call WARRANTY One-Year Limited Warranty Distributed by Northern Tool + Equipment Co., Inc. Burnsville, MN NorthernTool.com Made in China Page 5 of 5