BUILD YOUR OWN CART OWNER S MANUAL

Transcription

1 BUILD YOUR OWN CART OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item# 44474

2 Thank you very much for choosing anironton Product! For future reference, please complete the owner s record below: Model: Purchase Date: Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This item is designed for certain applications only. The distributor strongly recommends this kit is not modified and/or used for any application other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the kit until you have first contacted the distributor to determine if it can or should be performed on the product. For technical questions, please call WARNING:Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Save these instructions in a safe place and on hand so that they can be read when required. Keep these instructions to assist in future servicing. INTENDED USE This Ironton do-it-yourself kit includes all of the hardware components you need to make your own cart; just add a wooden platform deck of your choosing (not included) and you're ready to go! Assembly required. TECHNICAL SPECIFICATIONS Kit includes a tough steel handle with powder-coat finish, all the mounting hardware you'll need, 2 swivel casters and 2 rigid casters All casters are 6in. dia. with molded-on rubber wheel design Handle Size: 28in.W x 27in.H Wood Deck Size Recommended: 60in.L x 30in.W GENERAL SAFETY REGULATIONS WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur. It must be understood by the operator that common sense and caution are factors that cannot be built into this product, but must be supplied by the operator. 1. Keep the work area clean and dry. Damp or wet work areas can result in injury. 2. Keep children away from work area. Do not allow children to handle this product. 3. Store idle equipment. When not in use, tools and equipment should be stored in a dry location to inhibit rust. Always lock up tools and equipment, and keep out of reach of children. 4. Use the right tool for the job. Do not attempt to force small equipment to do the work of larger Page 2 of5

3 industrial equipment. There are certain applications for which this equipment was designed. It will do the job better and more safely at the capacity for which it was intended. Do not modify this equipment, and do not use this equipment for a purpose for which it was not intended. 5. Check for damaged parts. Before using this product, carefully check that it will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect the operation of this product. Replace damaged or worn parts immediately. 6. Do not overreach. Keep proper footing and balance at all times to prevent tripping, falling, back injury, etc. 7. DO NOT use the equipment when tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating this equipment may result in serious personal injury. 8. Industrial applications must follow OSHA requirements. SPECIFIC OPERATION WARNINGS To ensure safe and efficient operation, it is essential to read each of these warnings and precautions, and to follow all instructions listed in this manual. 1. The platform trolley is not a toy. Do not allow children to use it. 2. If you move the platform trolley over a slightly inclined surface (max 2 ), the platform trolley must be empty. 3. Be careful while transporting, in order to avoid accidents, particularly with heavy loads. 4. Do not use the platform trolley for passenger transportation. 5. The platform trolley must not be pulled by motorized vehicles. 6. The platform trolley may only be used on solid and even surfaces! 7. The platform trolley must be equipped with accessories, such as belts, in order to secure the load. 8. Do not use the platform trolley going downhill, because of the possibility of overload and loss of control. 9. Using accessories and spare parts not explicitly recommended by the manufacturer, may lead to injuries and damage of property. Therefore only use original accessories. 10. Do not load the Platform Truck more than the specified capacity. 11. Always distribute payload evenly over the platform of the truck. ASSEMBLY DIRECTIONS Tool required: One medium adjustable wrench (not included) Please check all the parts in the carton and make sure you ve got all as listed in the portion of "DIAGRAM & PARTS LIST. If you have all the parts, please find a proper wooden deck (Wooden deck of size 60in.L x 30in.W is recommended.) to build the platform cart on your own. ATTENTION: Please read all instructions before assembly and use: Step 1: Connect the connector (#4) to the wooden platform deck (not provided) with the M10 Bolts (#6), using the M10 Flat Washer (#9) and M10 Nut (#10) to lock up. Step 2: Attach the four casters (#1 and #2) to the wooden platform, using the M10 Bolts (#6), the M10 Flat Washer (#9) and M10 Nut (#10). Pay attention that the two swivel casters (#4) should be placed near the handle end so that you can steer the truck effectively. Step 3: Insert the handle (#5) into the holes of the connector (#4), secure the handle (#5) with the providedm8bolts (#8) firmly, using M8 Flat Washer (#3) and M8 Nut (#7) to lock up. Page 3 of5

4 STORAGE 1. Regularly check the condition of the platform trolley, particularly the casters and joints. 2. Tighten loose screws. 3. Replace damaged parts only with spare parts recommended by the manufacturer. 4. Store the platform trolley only inside of buildings, in order to avoid rust or damage caused by chemicals or rainwater. 5. If necessary, lubricate the caster bearings. Page 4 of5

5 DIAGRAM & PARTS LIST Wooden platform deck is NOT INCLUDED. Part# Description Q'TY Part# Description Q'TY 1 Swivel Caster 2 6 M10 70 Bolt 24 2 Rigid Caster 2 7 M8 Lock Nut 2 3 8mm Flat Washer 2 8 M 8 50 Bolt 2 4 Connector mm Flat Washer 24 5 Handle 1 10 M10 Lock Nut 24 For replacement parts and technical questions, please call WARRANTY One-Year Limited Warranty Distributed by: Northern Tool + Equipment Co., Inc. Burnsville, MN NorthernTool.com Made in China Page 5 of5