TO ORDER REPLACEMENT PARTS: PLEASE FURNISH THE FOLLOWING INFORMATION: Model Number. Part Number of Pump. Part Number and Description of part.

Transcription

1 Your Peace of Mind is Our Top Priority Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 37 Louisville, KY SHIP TO: 39 Cane Run Road Louisville, KY 02-9 (502) (800) 928-PUMP FAX (502) 77- REPLACEMENT PARTS LIST FOR GRINDER MODELS: E80 230V PHASE I80 200V PHASE F80 230V 3 PHASE G80 0V 3 PHASE J80 200V 3 PHASE BA80 575V 3 PHASE visit our web site: FM Supersedes 07 TO ORDER REPLACEMENT PARTS: PLEASE FURNISH THE FOLLOWING INFORMATION: Model Number. Part Number of Pump. Part Number and Description of part. SOOW CORDAGE POWER CORD SENSOR CORD (CORD MAY BE OR 5 CONDUCTOR) (WITH OR WITHOUT GROUND) (GREEN GROUND WIRE CLIPPED FLUSH TO OUTER JACKET) POWER CORD L L2 L3 GRD SENSOR CORD (CORD MAY BE OR 5 CONDUCTOR) (WITH OR WITHOUT GROUND) (GREEN GROUND WIRE CLIPPED FLUSH TO OUTER JACKET) * COVER BLACK RED ORANGE BLUE GREEN GREEN RED ORANGE BLACK COVER BLACK RED 2 3 GREEN GREEN RED ORANGE BLACK T T2 M M T T2 M M2 2 3 T T2 M M2 MOTOR /BLACK TRACER /RED TRACER /RED TRACER /BLUE TRACER T T2 M M2 THERMOSTAT MOTOR BLACK OR BLUE BROWN OR TAN OR ORANGE THERMOSTAT OVERLOAD AUXILIARY WINDING MAIN WINDING MOTOR BLACK OR /BLACK TRACER BLACK OR /BLACK TRACER WINDINGS MOTOR BLACK OR /BLACK TRACER BLACK OR /BLACK TRACER SEAL SENSOR FAILURE PROBES 330K OHMS RESISTANCE (BEFORE /2000 N/O) SEAL SENSOR FAILURE PROBES 330K OHMS RESISTANCE (BEFORE /2000 N/O) *Thermostat Optional WIRING DIAGRAM FOR MODELS E80 All Revisions I80 All Revisions /93 Copyright 20 Zoeller Co. All rights reserved. WIRING DIAGRAM FOR MODELS F80 All Revisions G80 All Revisions J80 All Revisions BA80 All Revisions /93

2 REPLACEMENT PARTS LIST FOR MODELS E80 MODELS: E80-A E80-B E80-C E80-D /93 /98 7/98 /02 2/02 8/0 9/0 COVER & CORD 200/230V/PH GRINDER SEAL,SQ-RING COVER SEAL,THRU WALL TERM HOUSING,MTR-& STR 200/230V/PH/ 80 /EMD, HOUSING,MTR-& STR 200/230V/PH/ 80 /GE, OIL,DIELECTRIC-(57 OZ CAN) ROTOR ASM 200/230V/PH/ 80 /EMD, ROTOR ASM 200/230V/PH/ 80 /GE RING,SNAP TRUARC KEY CORDAGE TERM&SEAL/ SEAL,CORD-ASM CORDAGE TERM&SEAL/ SEAL,CORD-ASM/POWER CORD CASE & SEAL PLUG,TEST BEARING,RADIAL.72 ID BEARING,730-P 80/ SEAL,SQ-RING ADAPTER SENSOR,MOISTURE ASM ADAPTER ASM GRINDER OIL,DIELECTRIC ( OZ CAN) SEAL ASM,SHAFT SEAL,SQ-RING SEAL PLATE 80/ PLATE,SEAL-MACH IMPELLER-MACH BRASS IMPELLER-MACH DUCTILE IRON HOUSING,PUMP-MACH CUTTER & DISC ASM GRINDER SHIM SET FOR 820/80 GRINDERS GUARD,CUTTER-PLASTIC SCREW,#-X.25RHM SL TC STLGR SCREW,.33-8 X.25 HH CAP-SS SCREW,#0-2X.25 SH CAP SS N/A SCREW, X LG HH SS (NYLOCK PRE-COAT 80) N/A N/A N/A SCREW,.25-20X.75 SH CAP SS SCREW,#0-2X.875-FLT SH CAP SS WASHER,RETAINING WASHER,LOCK SS. ID SCREW,.33-8 X HH CAP-SS HANDLE-SS/SQ GUIDE RAIL/(GRINDER) RESISTOR WASHER,FLAT SS DISC, CUTTER CUTTER & SHIM ASM/5 BLADE/.75 SCREW N/A CUTTER & SHIM ASM/5 BLADE/ SCREW N/A N/A N/A 0998 REBUILD KIT ) See FM00 Price Sheet for listing of parts prices. 2) NA indicates, not applicable. 3) If an X follows Model No., or Date Mfg. on brass ID tag, consult factory for ordering of this part. ) Housing, MTR & Stator (Item ) is preassembled at factory and must be replaced as a unit. Stator is permanently attached to the Motor Housing. Plug (Item ) and Seal, Wall Term. (Item 3) are replaceable. 5) When ordering these parts, customer must identify if G.E. or EMD. ) When ordering this part, customer must determine if an adapter with wings is required and specify when placing order. Copyright 20 Zoeller Co. All rights reserved. 2

3 REPLACEMENT PARTS LIST FOR MODELS I80 MODELS: I80-A I80-B I80-C I80-D /93 /98 7/98 /02 2/02 8/0 9/0 COVER & CORD 200/230V/PH GRINDER SEAL,SQ-RING COVER SEAL,THRU WALL TERM HOUSING,MTR-& STR 200/230V/PH/ 80 /EMD, HOUSING,MTR-& STR 200/230V/PH/ 80 /GE, OIL,DIELECTRIC-(57 OZ CAN) ROTOR ASM 200/230V/PH/ 80 /EMD, ROTOR ASM 200/230V/PH/ 80 /GE RING,SNAP TRUARC KEY CORDAGE TERM&SEAL/ SEAL,CORD-ASM CORDAGE TERM&SEAL/ SEAL,CORD-ASM/POWER CORD CASE & SEAL PLUG,TEST BEARING,RADIAL.72 ID BEARING,730-P 80/ SEAL,SQ-RING ADAPTER SENSOR,MOISTURE ASM ADAPTER ASM GRINDER OIL,DIELECTRIC ( OZ CAN) SEAL ASM,SHAFT SEAL,SQ-RING SEAL PLATE 80/ PLATE,SEAL-MACH IMPELLER-MACH BRASS IMPELLER-MACH DUCTILE IRON HOUSING,PUMP-MACH CUTTER & DISC ASM GRINDER SHIM SET FOR 820/80 GRINDERS GUARD,CUTTER-PLASTIC SCREW,#-X.25RHM SL TC STLGR SCREW,.33-8 X.25 HH CAP-SS SCREW,#0-2X.25 SH CAP SS N/A SCREW, X LG HH SS (NYLOCK PRE-COAT 80) N/A N/A N/A SCREW,.25-20X.75 SH CAP SS SCREW,#0-2X.875-FLT SH CAP SS WASHER,RETAINING WASHER,LOCK SS. ID SCREW,.33-8 X HH CAP-SS HANDLE-SS/SQ GUIDE RAIL/(GRINDER) RESISTOR WASHER,FLAT SS DISC, CUTTER CUTTER & SHIM ASM/5 BLADE/.75 SCREW N/A CUTTER & SHIM ASM/5 BLADE/ SCREW N/A N/A N/A 0998 REBUILD KIT ) See FM00 Price Sheet for listing of parts prices. 2) NA indicates, not applicable. 3) If an X follows Model No., or Date Mfg. on brass ID tag, consult factory for ordering of this part. ) Housing, MTR & Stator (Item ) is preassembled at factory and must be replaced as a unit. Stator is permanently attached to the Motor Housing. Plug (Item ) and Seal, Wall Term. (Item 3) are replaceable. 5) When ordering these parts, customer must identify if G.E. or EMD. ) When ordering this part, customer must determine if an adapter with wings is required and specify when placing order. Copyright 20 Zoeller Co. All rights reserved. 3

4 REPLACEMENT PARTS LIST FOR MODELS F80 MODELS: F80-A F80-B F80-C F80-D F80-E /93 2/97 /98 2/99 3/99 /02 2/02 8/0 9/0 COVER & CORD 200/230/0/575V/3PH GRINDER SEAL,SQ-RING COVER SEAL,THRU WALL TERM HOUSING,MTR-& STR 230V/3PH/ 80 /EMD, HOUSING,MTR-& STR 230V/3PH/ 80 /GE, OIL,DIELECTRIC-(7 OZ CAN) ROTOR ASM 200/230/0/575V/3PH/ 80 /EMD, ROTOR ASM 200/230/0/575V/3PH/ 80 /GE RING,SNAP TRUARC KEY CORDAGE TERM&SEAL/ SEAL,CORD-ASM N/A N/A SEAL,CORD-ASM/80/80/SENSOR CD CORDAGE TERM&SEAL/ SEAL,CORD-ASM/POWER CORD CASE & SEAL PLUG,TEST BEARING,RADIAL.72 ID BEARING,730-P 80/ SEAL,SQ-RING ADAPTER SENSOR,MOISTURE ASM ADAPTER ASM GRINDER OIL,DIELECTRIC ( OZ CAN) SEAL ASM,SHAFT SEAL,SQ-RING SEAL PLATE 80/ PLATE,SEAL-MACH IMPELLER-MACH BRASS IMPELLER-MACH DUCTILE IRON HOUSING,PUMP-MACH CUTTER & DISC ASM GRINDER SHIM SET FOR 820/80 GRINDERS GUARD,CUTTER-PLASTIC SCREW,#-X.25RHM SL TC STLGR SCREW,.33-8 X.25 HH CAP-SS SCREW,#0-2X.25 SH CAP SS N/A SCREW, X LG HH SS (NYLOCK PRE-COAT 80) N/A N/A N/A N/A SCREW,.25-20X.75 SH CAP SS SCREW,#0-2X.875-FLT SH CAP SS WASHER,RETAINING WASHER,LOCK SS. ID SCREW,.33-8 X HH CAP-SS HANDLE-SS/SQ GUIDE RAIL/(GRINDER) RESISTOR WASHER,FLAT SS DISC, CUTTER CUTTER & SHIM ASM/5 BLADE/.75 SCREW N/A CUTTER & SHIM ASM/5 BLADE/ SCREW N/A N/A N/A N/A 0998 REBUILD KIT REBUILD KIT 80 5 CONDUCTOR SENSOR CORD ) See FM00 Price Sheet for listing of parts prices. 2) NA indicates, not applicable. 3) If an X follows Model No., or Date Mfg. on brass ID tag, consult factory for ordering of this part. ) Housing, MTR & Stator (Item ) is preassembled at factory and must be replaced as a unit. Stator is permanently attached to the Motor Housing. Plug (Item ) and Seal, Wall Term. (Item 3) are replaceable. 5) When ordering these parts, customer must identify if G.E. or EMD. ) When ordering this part, customer must determine if an adapter with wings is required and specify when placing order. Copyright 20 Zoeller Co. All rights reserved.

5 REPLACEMENT PARTS LIST FOR MODELS G80 MODELS: G80-A G80-B G80-C G80-D G80-E 0/93 2/97 /98 2/99 3/99 /02 2/02 8/0 9/0 COVER & CORD 200/230/0/575V/3PH GRINDER SEAL,SQ-RING COVER SEAL,THRU WALL TERM HOUSING,MTR-& STR 0V/3PH/ 80 /EMD, HOUSING,MTR-& STR 0V/3PH/ 80 /GE, OIL,DIELECTRIC-(7 OZ CAN) ROTOR ASM 200/230/0/575V/3PH/ 80 /EMD, ROTOR ASM 200/230/0/575V/3PH/ 80 /GE RING,SNAP TRUARC KEY CORDAGE TERM&SEAL/ SEAL,CORD-ASM N/A N/A SEAL,CORD-ASM/80/80/SENSOR CD CORDAGE TERM&SEAL/ SEAL,CORD-ASM/POWER CORD CASE & SEAL PLUG,TEST BEARING,RADIAL.72 ID BEARING,730-P 80/ SEAL,SQ-RING ADAPTER SENSOR,MOISTURE ASM ADAPTER ASM GRINDER OIL,DIELECTRIC ( OZ CAN) SEAL ASM,SHAFT SEAL,SQ-RING SEAL PLATE 80/ PLATE,SEAL-MACH IMPELLER-MACH BRASS IMPELLER-MACH DUCTILE IRON HOUSING,PUMP-MACH CUTTER & DISC ASM GRINDER SHIM SET FOR 820/80 GRINDERS GUARD,CUTTER-PLASTIC SCREW,#-X.25RHM SL TC STLGR SCREW,.33-8 X.25 HH CAP-SS SCREW,#0-2X.25 SH CAP SS N/A SCREW, X LG HH SS (NYLOCK PRE-COAT 80) N/A N/A N/A N/A SCREW,.25-20X.75 SH CAP SS SCREW,#0-2X.875-FLT SH CAP SS WASHER,RETAINING WASHER,LOCK SS. ID SCREW,.33-8 X HH CAP-SS HANDLE-SS/SQ GUIDE RAIL/(GRINDER) RESISTOR WASHER,FLAT SS DISC, CUTTER CUTTER & SHIM ASM/5 BLADE/.75 SCREW N/A CUTTER & SHIM ASM/5 BLADE/ SCREW N/A N/A N/A N/A 0998 REBUILD KIT REBUILD KIT 80 5 CONDUCTOR SENSOR CORD ) See FM00 Price Sheet for listing of parts prices. 2) NA indicates, not applicable. 3) If an X follows Model No., or Date Mfg. on brass ID tag, consult factory for ordering of this part. ) Housing, MTR & Stator (Item ) is preassembled at factory and must be replaced as a unit. Stator is permanently attached to the Motor Housing. Plug (Item ) and Seal, Wall Term. (Item 3) are replaceable. 5) When ordering these parts, customer must identify if G.E. or EMD. ) When ordering this part, customer must determine if an adapter with wings is required and specify when placing order. Copyright 20 Zoeller Co. All rights reserved. 5

6 REPLACEMENT PARTS LIST FOR MODELS J80 MODELS: J80-A J80-B J80-C J80-D J80-E 0/93 2/97 /98 2/99 3/99 /02 2/02 8/0 9/0 COVER & CORD 200/230/0/575V/3PH GRINDER SEAL,SQ-RING COVER SEAL,THRU WALL TERM HOUSING,MTR-& STR 200V/3PH/ 80 /EMD, HOUSING,MTR-& STR 200V/3PH/ 80 /GE, OIL,DIELECTRIC-(7 OZ CAN) ROTOR ASM 200/230/0/575V/3PH/ 80 /EMD, ROTOR ASM 200/230/0/575V/3PH/ 80 /GE RING,SNAP TRUARC KEY CORDAGE TERM&SEAL/ SEAL,CORD-ASM N/A N/A SEAL,CORD-ASM/80/80/SENSOR CD CORDAGE TERM&SEAL/ SEAL,CORD-ASM/POWER CORD CASE & SEAL PLUG,TEST BEARING,RADIAL.72 ID BEARING,730-P 80/ SEAL,SQ-RING ADAPTER SENSOR,MOISTURE ASM ADAPTER ASM GRINDER OIL,DIELECTRIC ( OZ CAN) SEAL ASM,SHAFT SEAL,SQ-RING SEAL PLATE 80/ PLATE,SEAL-MACH IMPELLER-MACH BRASS IMPELLER-MACH DUCTILE IRON HOUSING,PUMP-MACH CUTTER & DISC ASM GRINDER SHIM SET FOR 820/80 GRINDERS GUARD,CUTTER-PLASTIC SCREW,#-X.25RHM SL TC STLGR SCREW,.33-8 X.25 HH CAP-SS SCREW,#0-2X.25 SH CAP SS N/A SCREW, X LG HH SS (NYLOCK PRE-COAT 80) N/A N/A N/A N/A SCREW,.25-20X.75 SH CAP SS SCREW,#0-2X.875-FLT SH CAP SS WASHER,RETAINING WASHER,LOCK SS. ID SCREW,.33-8 X HH CAP-SS HANDLE-SS/SQ GUIDE RAIL/(GRINDER) RESISTOR WASHER,FLAT SS DISC, CUTTER CUTTER & SHIM ASM/5 BLADE/.75 SCREW N/A CUTTER & SHIM ASM/5 BLADE/ SCREW N/A N/A N/A N/A 0998 REBUILD KIT REBUILD KIT 80 5 CONDUCTOR SENSOR CORD ) See FM00 Price Sheet for listing of parts prices. 2) NA indicates, not applicable. 3) If an X follows Model No., or Date Mfg. on brass ID tag, consult factory for ordering of this part. ) Housing, MTR & Stator (Item ) is preassembled at factory and must be replaced as a unit. Stator is permanently attached to the Motor Housing. Plug (Item ) and Seal, Wall Term. (Item 3) are replaceable. 5) When ordering these parts, customer must identify if G.E. or EMD. ) When ordering this part, customer must determine if an adapter with wings is required and specify when placing order. Copyright 20 Zoeller Co. All rights reserved.

7 REPLACEMENT PARTS LIST FOR MODELS BA80 MODELS: BA80-A BA80-B BA80-C BA80-D BA80-E COVER & CORD 200/230/0/575V/3PH GRINDER SEAL,SQ-RING COVER SEAL,THRU WALL TERM /93 2/97 /98 2/99 3/99 /02 2/02 8/0 9/0 HOUSING,MTR-& STR 575V/3PH/ 80 /EMD, HOUSING,MTR-& STR 575V/3PH/ 80 /GE, OIL,DIELECTRIC-(7 OZ CAN) ROTOR ASM 200/230/0/575V/3PH/ 80 /EMD, ROTOR ASM 200/230/0/575V/3PH/ 80 /GE RING,SNAP TRUARC KEY CORDAGE TERM&SEAL/ SEAL,CORD-ASM N/A N/A SEAL,CORD-ASM/80/80/SENSOR CD CORDAGE TERM&SEAL/ SEAL,CORD-ASM/POWER CORD CASE & SEAL PLUG,TEST BEARING,RADIAL.72 ID BEARING,730-P 80/ SEAL,SQ-RING ADAPTER SENSOR,MOISTURE ASM ADAPTER ASM GRINDER OIL,DIELECTRIC ( OZ CAN) SEAL ASM,SHAFT SEAL,SQ-RING SEAL PLATE 80/ PLATE,SEAL-MACH IMPELLER-MACH BRASS IMPELLER-MACH DUCTILE IRON HOUSING,PUMP-MACH CUTTER & DISC ASM GRINDER SHIM SET FOR 820/80 GRINDERS GUARD,CUTTER-PLASTIC SCREW,#-X.25RHM SL TC STLGR SCREW,.33-8 X.25 HH CAP-SS SCREW,#0-2X.25 SH CAP SS N/A SCREW, X LG HH SS (NYLOCK PRE-COAT 80) N/A N/A N/A N/A SCREW,.25-20X.75 SH CAP SS SCREW,#0-2X.875-FLT SH CAP SS WASHER,RETAINING WASHER,LOCK SS. ID SCREW,.33-8 X HH CAP-SS HANDLE-SS/SQ GUIDE RAIL/(GRINDER) RESISTOR WASHER,FLAT SS DISC, CUTTER CUTTER & SHIM ASM/5 BLADE/.75 SCREW N/A CUTTER & SHIM ASM/5 BLADE/ SCREW N/A N/A N/A N/A 0998 REBUILD KIT REBUILD KIT 80 5 CONDUCTOR SENSOR CORD See NOTES on page 8. Copyright 20 Zoeller Co. All rights reserved. 7

8 NOTES for BA80 Parts List: ) See FM00 Price Sheet for listing of parts prices. 2) NA indicates, not applicable. 3) If an X follows Model No., or Date Mfg. on brass ID tag, consult factory for ordering of this part. ) Housing, MTR & Stator (Item ) is preassembled at factory and must be replaced as a unit. Stator is permanently attached to the Motor Housing. Plug (Item ) and Seal, Wall Term. (Item 3) are replaceable. 5) When ordering these parts, customer must identify if G.E. or EMD. ) When ordering this part, customer must determine if an adapter with wings is required and specify when placing order. REPLACEMENT PARTS ILLUSTRATION FOR 80 - ALL MODELS OR "WINGS" ARE APPLICABLE FROM /93 TO 08/ SK382 Copyright 20 Zoeller Co. All rights reserved. 8